diff options
Diffstat (limited to 'tools/testing')
-rwxr-xr-x | tools/testing/selftests/rcutorture/bin/mkinitrd.sh | 27 | ||||
-rw-r--r-- | tools/testing/selftests/rcutorture/bin/nolibc.h | 2197 |
2 files changed, 17 insertions, 2207 deletions
diff --git a/tools/testing/selftests/rcutorture/bin/mkinitrd.sh b/tools/testing/selftests/rcutorture/bin/mkinitrd.sh index da298394daa2..83552bb007b4 100755 --- a/tools/testing/selftests/rcutorture/bin/mkinitrd.sh +++ b/tools/testing/selftests/rcutorture/bin/mkinitrd.sh @@ -40,17 +40,24 @@ mkdir $T cat > $T/init << '__EOF___' #!/bin/sh # Run in userspace a few milliseconds every second. This helps to -# exercise the NO_HZ_FULL portions of RCU. +# exercise the NO_HZ_FULL portions of RCU. The 192 instances of "a" was +# empirically shown to give a nice multi-millisecond burst of user-mode +# execution on a 2GHz CPU, as desired. Modern CPUs will vary from a +# couple of milliseconds up to perhaps 100 milliseconds, which is an +# acceptable range. +# +# Why not calibrate an exact delay? Because within this initrd, we +# are restricted to Bourne-shell builtins, which as far as I know do not +# provide any means of obtaining a fine-grained timestamp. + +a4="a a a a" +a16="$a4 $a4 $a4 $a4" +a64="$a16 $a16 $a16 $a16" +a192="$a64 $a64 $a64" while : do q= - for i in \ - a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a \ - a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a \ - a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a \ - a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a \ - a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a \ - a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a + for i in $a192 do q="$q $i" done @@ -124,8 +131,8 @@ if echo -e "#if __x86_64__||__i386__||__i486__||__i586__||__i686__" \ | grep -q '^yes'; then # architecture supported by nolibc ${CROSS_COMPILE}gcc -fno-asynchronous-unwind-tables -fno-ident \ - -nostdlib -include ../bin/nolibc.h -lgcc -s -static -Os \ - -o init init.c + -nostdlib -include ../../../../include/nolibc/nolibc.h \ + -lgcc -s -static -Os -o init init.c else ${CROSS_COMPILE}gcc -s -static -Os -o init init.c fi diff --git a/tools/testing/selftests/rcutorture/bin/nolibc.h b/tools/testing/selftests/rcutorture/bin/nolibc.h deleted file mode 100644 index f98f5b92d3eb..000000000000 --- a/tools/testing/selftests/rcutorture/bin/nolibc.h +++ /dev/null @@ -1,2197 +0,0 @@ -/* SPDX-License-Identifier: LGPL-2.1 OR MIT */ -/* nolibc.h - * Copyright (C) 2017-2018 Willy Tarreau <w@1wt.eu> - */ - -/* some archs (at least aarch64) don't expose the regular syscalls anymore by - * default, either because they have an "_at" replacement, or because there are - * more modern alternatives. For now we'd rather still use them. - */ -#define __ARCH_WANT_SYSCALL_NO_AT -#define __ARCH_WANT_SYSCALL_NO_FLAGS -#define __ARCH_WANT_SYSCALL_DEPRECATED - -#include <asm/unistd.h> -#include <asm/ioctls.h> -#include <asm/errno.h> -#include <linux/fs.h> -#include <linux/loop.h> - -#define NOLIBC - -/* Build a static executable this way : - * $ gcc -fno-asynchronous-unwind-tables -fno-ident -s -Os -nostdlib \ - * -static -include nolibc.h -lgcc -o hello hello.c - * - * Useful calling convention table found here : - * http://man7.org/linux/man-pages/man2/syscall.2.html - * - * This doc is even better : - * https://w3challs.com/syscalls/ - */ - - -/* this way it will be removed if unused */ -static int errno; - -#ifndef NOLIBC_IGNORE_ERRNO -#define SET_ERRNO(v) do { errno = (v); } while (0) -#else -#define SET_ERRNO(v) do { } while (0) -#endif - -/* errno codes all ensure that they will not conflict with a valid pointer - * because they all correspond to the highest addressable memry page. - */ -#define MAX_ERRNO 4095 - -/* Declare a few quite common macros and types that usually are in stdlib.h, - * stdint.h, ctype.h, unistd.h and a few other common locations. - */ - -#define NULL ((void *)0) - -/* stdint types */ -typedef unsigned char uint8_t; -typedef signed char int8_t; -typedef unsigned short uint16_t; -typedef signed short int16_t; -typedef unsigned int uint32_t; -typedef signed int int32_t; -typedef unsigned long long uint64_t; -typedef signed long long int64_t; -typedef unsigned long size_t; -typedef signed long ssize_t; -typedef unsigned long uintptr_t; -typedef signed long intptr_t; -typedef signed long ptrdiff_t; - -/* for stat() */ -typedef unsigned int dev_t; -typedef unsigned long ino_t; -typedef unsigned int mode_t; -typedef signed int pid_t; -typedef unsigned int uid_t; -typedef unsigned int gid_t; -typedef unsigned long nlink_t; -typedef signed long off_t; -typedef signed long blksize_t; -typedef signed long blkcnt_t; -typedef signed long time_t; - -/* for poll() */ -struct pollfd { - int fd; - short int events; - short int revents; -}; - -/* for select() */ -struct timeval { - long tv_sec; - long tv_usec; -}; - -/* for pselect() */ -struct timespec { - long tv_sec; - long tv_nsec; -}; - -/* for gettimeofday() */ -struct timezone { - int tz_minuteswest; - int tz_dsttime; -}; - -/* for getdents64() */ -struct linux_dirent64 { - uint64_t d_ino; - int64_t d_off; - unsigned short d_reclen; - unsigned char d_type; - char d_name[]; -}; - -/* commonly an fd_set represents 256 FDs */ -#define FD_SETSIZE 256 -typedef struct { uint32_t fd32[FD_SETSIZE/32]; } fd_set; - -/* needed by wait4() */ -struct rusage { - struct timeval ru_utime; - struct timeval ru_stime; - long ru_maxrss; - long ru_ixrss; - long ru_idrss; - long ru_isrss; - long ru_minflt; - long ru_majflt; - long ru_nswap; - long ru_inblock; - long ru_oublock; - long ru_msgsnd; - long ru_msgrcv; - long ru_nsignals; - long ru_nvcsw; - long ru_nivcsw; -}; - -/* stat flags (WARNING, octal here) */ -#define S_IFDIR 0040000 -#define S_IFCHR 0020000 -#define S_IFBLK 0060000 -#define S_IFREG 0100000 -#define S_IFIFO 0010000 -#define S_IFLNK 0120000 -#define S_IFSOCK 0140000 -#define S_IFMT 0170000 - -#define S_ISDIR(mode) (((mode) & S_IFDIR) == S_IFDIR) -#define S_ISCHR(mode) (((mode) & S_IFCHR) == S_IFCHR) -#define S_ISBLK(mode) (((mode) & S_IFBLK) == S_IFBLK) -#define S_ISREG(mode) (((mode) & S_IFREG) == S_IFREG) -#define S_ISFIFO(mode) (((mode) & S_IFIFO) == S_IFIFO) -#define S_ISLNK(mode) (((mode) & S_IFLNK) == S_IFLNK) -#define S_ISSOCK(mode) (((mode) & S_IFSOCK) == S_IFSOCK) - -#define DT_UNKNOWN 0 -#define DT_FIFO 1 -#define DT_CHR 2 -#define DT_DIR 4 -#define DT_BLK 6 -#define DT_REG 8 -#define DT_LNK 10 -#define DT_SOCK 12 - -/* all the *at functions */ -#ifndef AT_FDWCD -#define AT_FDCWD -100 -#endif - -/* lseek */ -#define SEEK_SET 0 -#define SEEK_CUR 1 -#define SEEK_END 2 - -/* reboot */ -#define LINUX_REBOOT_MAGIC1 0xfee1dead -#define LINUX_REBOOT_MAGIC2 0x28121969 -#define LINUX_REBOOT_CMD_HALT 0xcdef0123 -#define LINUX_REBOOT_CMD_POWER_OFF 0x4321fedc -#define LINUX_REBOOT_CMD_RESTART 0x01234567 -#define LINUX_REBOOT_CMD_SW_SUSPEND 0xd000fce2 - - -/* The format of the struct as returned by the libc to the application, which - * significantly differs from the format returned by the stat() syscall flavours. - */ -struct stat { - dev_t st_dev; /* ID of device containing file */ - ino_t st_ino; /* inode number */ - mode_t st_mode; /* protection */ - nlink_t st_nlink; /* number of hard links */ - uid_t st_uid; /* user ID of owner */ - gid_t st_gid; /* group ID of owner */ - dev_t st_rdev; /* device ID (if special file) */ - off_t st_size; /* total size, in bytes */ - blksize_t st_blksize; /* blocksize for file system I/O */ - blkcnt_t st_blocks; /* number of 512B blocks allocated */ - time_t st_atime; /* time of last access */ - time_t st_mtime; /* time of last modification */ - time_t st_ctime; /* time of last status change */ -}; - -#define WEXITSTATUS(status) (((status) & 0xff00) >> 8) -#define WIFEXITED(status) (((status) & 0x7f) == 0) - - -/* Below comes the architecture-specific code. For each architecture, we have - * the syscall declarations and the _start code definition. This is the only - * global part. On all architectures the kernel puts everything in the stack - * before jumping to _start just above us, without any return address (_start - * is not a function but an entry pint). So at the stack pointer we find argc. - * Then argv[] begins, and ends at the first NULL. Then we have envp which - * starts and ends with a NULL as well. So envp=argv+argc+1. - */ - -#if defined(__x86_64__) -/* Syscalls for x86_64 : - * - registers are 64-bit - * - syscall number is passed in rax - * - arguments are in rdi, rsi, rdx, r10, r8, r9 respectively - * - the system call is performed by calling the syscall instruction - * - syscall return comes in rax - * - rcx and r8..r11 may be clobbered, others are preserved. - * - the arguments are cast to long and assigned into the target registers - * which are then simply passed as registers to the asm code, so that we - * don't have to experience issues with register constraints. - * - the syscall number is always specified last in order to allow to force - * some registers before (gcc refuses a %-register at the last position). - */ - -#define my_syscall0(num) \ -({ \ - long _ret; \ - register long _num asm("rax") = (num); \ - \ - asm volatile ( \ - "syscall\n" \ - : "=a" (_ret) \ - : "0"(_num) \ - : "rcx", "r8", "r9", "r10", "r11", "memory", "cc" \ - ); \ - _ret; \ -}) - -#define my_syscall1(num, arg1) \ -({ \ - long _ret; \ - register long _num asm("rax") = (num); \ - register long _arg1 asm("rdi") = (long)(arg1); \ - \ - asm volatile ( \ - "syscall\n" \ - : "=a" (_ret) \ - : "r"(_arg1), \ - "0"(_num) \ - : "rcx", "r8", "r9", "r10", "r11", "memory", "cc" \ - ); \ - _ret; \ -}) - -#define my_syscall2(num, arg1, arg2) \ -({ \ - long _ret; \ - register long _num asm("rax") = (num); \ - register long _arg1 asm("rdi") = (long)(arg1); \ - register long _arg2 asm("rsi") = (long)(arg2); \ - \ - asm volatile ( \ - "syscall\n" \ - : "=a" (_ret) \ - : "r"(_arg1), "r"(_arg2), \ - "0"(_num) \ - : "rcx", "r8", "r9", "r10", "r11", "memory", "cc" \ - ); \ - _ret; \ -}) - -#define my_syscall3(num, arg1, arg2, arg3) \ -({ \ - long _ret; \ - register long _num asm("rax") = (num); \ - register long _arg1 asm("rdi") = (long)(arg1); \ - register long _arg2 asm("rsi") = (long)(arg2); \ - register long _arg3 asm("rdx") = (long)(arg3); \ - \ - asm volatile ( \ - "syscall\n" \ - : "=a" (_ret) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), \ - "0"(_num) \ - : "rcx", "r8", "r9", "r10", "r11", "memory", "cc" \ - ); \ - _ret; \ -}) - -#define my_syscall4(num, arg1, arg2, arg3, arg4) \ -({ \ - long _ret; \ - register long _num asm("rax") = (num); \ - register long _arg1 asm("rdi") = (long)(arg1); \ - register long _arg2 asm("rsi") = (long)(arg2); \ - register long _arg3 asm("rdx") = (long)(arg3); \ - register long _arg4 asm("r10") = (long)(arg4); \ - \ - asm volatile ( \ - "syscall\n" \ - : "=a" (_ret), "=r"(_arg4) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \ - "0"(_num) \ - : "rcx", "r8", "r9", "r11", "memory", "cc" \ - ); \ - _ret; \ -}) - -#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \ -({ \ - long _ret; \ - register long _num asm("rax") = (num); \ - register long _arg1 asm("rdi") = (long)(arg1); \ - register long _arg2 asm("rsi") = (long)(arg2); \ - register long _arg3 asm("rdx") = (long)(arg3); \ - register long _arg4 asm("r10") = (long)(arg4); \ - register long _arg5 asm("r8") = (long)(arg5); \ - \ - asm volatile ( \ - "syscall\n" \ - : "=a" (_ret), "=r"(_arg4), "=r"(_arg5) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \ - "0"(_num) \ - : "rcx", "r9", "r11", "memory", "cc" \ - ); \ - _ret; \ -}) - -#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \ -({ \ - long _ret; \ - register long _num asm("rax") = (num); \ - register long _arg1 asm("rdi") = (long)(arg1); \ - register long _arg2 asm("rsi") = (long)(arg2); \ - register long _arg3 asm("rdx") = (long)(arg3); \ - register long _arg4 asm("r10") = (long)(arg4); \ - register long _arg5 asm("r8") = (long)(arg5); \ - register long _arg6 asm("r9") = (long)(arg6); \ - \ - asm volatile ( \ - "syscall\n" \ - : "=a" (_ret), "=r"(_arg4), "=r"(_arg5) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \ - "r"(_arg6), "0"(_num) \ - : "rcx", "r11", "memory", "cc" \ - ); \ - _ret; \ -}) - -/* startup code */ -asm(".section .text\n" - ".global _start\n" - "_start:\n" - "pop %rdi\n" // argc (first arg, %rdi) - "mov %rsp, %rsi\n" // argv[] (second arg, %rsi) - "lea 8(%rsi,%rdi,8),%rdx\n" // then a NULL then envp (third arg, %rdx) - "and $-16, %rsp\n" // x86 ABI : esp must be 16-byte aligned when - "sub $8, %rsp\n" // entering the callee - "call main\n" // main() returns the status code, we'll exit with it. - "movzb %al, %rdi\n" // retrieve exit code from 8 lower bits - "mov $60, %rax\n" // NR_exit == 60 - "syscall\n" // really exit - "hlt\n" // ensure it does not return - ""); - -/* fcntl / open */ -#define O_RDONLY 0 -#define O_WRONLY 1 -#define O_RDWR 2 -#define O_CREAT 0x40 -#define O_EXCL 0x80 -#define O_NOCTTY 0x100 -#define O_TRUNC 0x200 -#define O_APPEND 0x400 -#define O_NONBLOCK 0x800 -#define O_DIRECTORY 0x10000 - -/* The struct returned by the stat() syscall, equivalent to stat64(). The - * syscall returns 116 bytes and stops in the middle of __unused. - */ -struct sys_stat_struct { - unsigned long st_dev; - unsigned long st_ino; - unsigned long st_nlink; - unsigned int st_mode; - unsigned int st_uid; - - unsigned int st_gid; - unsigned int __pad0; - unsigned long st_rdev; - long st_size; - long st_blksize; - - long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - long __unused[3]; -}; - -#elif defined(__i386__) || defined(__i486__) || defined(__i586__) || defined(__i686__) -/* Syscalls for i386 : - * - mostly similar to x86_64 - * - registers are 32-bit - * - syscall number is passed in eax - * - arguments are in ebx, ecx, edx, esi, edi, ebp respectively - * - all registers are preserved (except eax of course) - * - the system call is performed by calling int $0x80 - * - syscall return comes in eax - * - the arguments are cast to long and assigned into the target registers - * which are then simply passed as registers to the asm code, so that we - * don't have to experience issues with register constraints. - * - the syscall number is always specified last in order to allow to force - * some registers before (gcc refuses a %-register at the last position). - * - * Also, i386 supports the old_select syscall if newselect is not available - */ -#define __ARCH_WANT_SYS_OLD_SELECT - -#define my_syscall0(num) \ -({ \ - long _ret; \ - register long _num asm("eax") = (num); \ - \ - asm volatile ( \ - "int $0x80\n" \ - : "=a" (_ret) \ - : "0"(_num) \ - : "memory", "cc" \ - ); \ - _ret; \ -}) - -#define my_syscall1(num, arg1) \ -({ \ - long _ret; \ - register long _num asm("eax") = (num); \ - register long _arg1 asm("ebx") = (long)(arg1); \ - \ - asm volatile ( \ - "int $0x80\n" \ - : "=a" (_ret) \ - : "r"(_arg1), \ - "0"(_num) \ - : "memory", "cc" \ - ); \ - _ret; \ -}) - -#define my_syscall2(num, arg1, arg2) \ -({ \ - long _ret; \ - register long _num asm("eax") = (num); \ - register long _arg1 asm("ebx") = (long)(arg1); \ - register long _arg2 asm("ecx") = (long)(arg2); \ - \ - asm volatile ( \ - "int $0x80\n" \ - : "=a" (_ret) \ - : "r"(_arg1), "r"(_arg2), \ - "0"(_num) \ - : "memory", "cc" \ - ); \ - _ret; \ -}) - -#define my_syscall3(num, arg1, arg2, arg3) \ -({ \ - long _ret; \ - register long _num asm("eax") = (num); \ - register long _arg1 asm("ebx") = (long)(arg1); \ - register long _arg2 asm("ecx") = (long)(arg2); \ - register long _arg3 asm("edx") = (long)(arg3); \ - \ - asm volatile ( \ - "int $0x80\n" \ - : "=a" (_ret) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), \ - "0"(_num) \ - : "memory", "cc" \ - ); \ - _ret; \ -}) - -#define my_syscall4(num, arg1, arg2, arg3, arg4) \ -({ \ - long _ret; \ - register long _num asm("eax") = (num); \ - register long _arg1 asm("ebx") = (long)(arg1); \ - register long _arg2 asm("ecx") = (long)(arg2); \ - register long _arg3 asm("edx") = (long)(arg3); \ - register long _arg4 asm("esi") = (long)(arg4); \ - \ - asm volatile ( \ - "int $0x80\n" \ - : "=a" (_ret) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \ - "0"(_num) \ - : "memory", "cc" \ - ); \ - _ret; \ -}) - -#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \ -({ \ - long _ret; \ - register long _num asm("eax") = (num); \ - register long _arg1 asm("ebx") = (long)(arg1); \ - register long _arg2 asm("ecx") = (long)(arg2); \ - register long _arg3 asm("edx") = (long)(arg3); \ - register long _arg4 asm("esi") = (long)(arg4); \ - register long _arg5 asm("edi") = (long)(arg5); \ - \ - asm volatile ( \ - "int $0x80\n" \ - : "=a" (_ret) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \ - "0"(_num) \ - : "memory", "cc" \ - ); \ - _ret; \ -}) - -/* startup code */ -asm(".section .text\n" - ".global _start\n" - "_start:\n" - "pop %eax\n" // argc (first arg, %eax) - "mov %esp, %ebx\n" // argv[] (second arg, %ebx) - "lea 4(%ebx,%eax,4),%ecx\n" // then a NULL then envp (third arg, %ecx) - "and $-16, %esp\n" // x86 ABI : esp must be 16-byte aligned when - "push %ecx\n" // push all registers on the stack so that we - "push %ebx\n" // support both regparm and plain stack modes - "push %eax\n" - "call main\n" // main() returns the status code in %eax - "movzbl %al, %ebx\n" // retrieve exit code from lower 8 bits - "movl $1, %eax\n" // NR_exit == 1 - "int $0x80\n" // exit now - "hlt\n" // ensure it does not - ""); - -/* fcntl / open */ -#define O_RDONLY 0 -#define O_WRONLY 1 -#define O_RDWR 2 -#define O_CREAT 0x40 -#define O_EXCL 0x80 -#define O_NOCTTY 0x100 -#define O_TRUNC 0x200 -#define O_APPEND 0x400 -#define O_NONBLOCK 0x800 -#define O_DIRECTORY 0x10000 - -/* The struct returned by the stat() syscall, 32-bit only, the syscall returns - * exactly 56 bytes (stops before the unused array). - */ -struct sys_stat_struct { - unsigned long st_dev; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused[2]; -}; - -#elif defined(__ARM_EABI__) -/* Syscalls for ARM in ARM or Thumb modes : - * - registers are 32-bit - * - stack is 8-byte aligned - * ( http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.faqs/ka4127.html) - * - syscall number is passed in r7 - * - arguments are in r0, r1, r2, r3, r4, r5 - * - the system call is performed by calling svc #0 - * - syscall return comes in r0. - * - only lr is clobbered. - * - the arguments are cast to long and assigned into the target registers - * which are then simply passed as registers to the asm code, so that we - * don't have to experience issues with register constraints. - * - the syscall number is always specified last in order to allow to force - * some registers before (gcc refuses a %-register at the last position). - * - * Also, ARM supports the old_select syscall if newselect is not available - */ -#define __ARCH_WANT_SYS_OLD_SELECT - -#define my_syscall0(num) \ -({ \ - register long _num asm("r7") = (num); \ - register long _arg1 asm("r0"); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r"(_arg1) \ - : "r"(_num) \ - : "memory", "cc", "lr" \ - ); \ - _arg1; \ -}) - -#define my_syscall1(num, arg1) \ -({ \ - register long _num asm("r7") = (num); \ - register long _arg1 asm("r0") = (long)(arg1); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r"(_arg1) \ - : "r"(_arg1), \ - "r"(_num) \ - : "memory", "cc", "lr" \ - ); \ - _arg1; \ -}) - -#define my_syscall2(num, arg1, arg2) \ -({ \ - register long _num asm("r7") = (num); \ - register long _arg1 asm("r0") = (long)(arg1); \ - register long _arg2 asm("r1") = (long)(arg2); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r"(_arg1) \ - : "r"(_arg1), "r"(_arg2), \ - "r"(_num) \ - : "memory", "cc", "lr" \ - ); \ - _arg1; \ -}) - -#define my_syscall3(num, arg1, arg2, arg3) \ -({ \ - register long _num asm("r7") = (num); \ - register long _arg1 asm("r0") = (long)(arg1); \ - register long _arg2 asm("r1") = (long)(arg2); \ - register long _arg3 asm("r2") = (long)(arg3); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r"(_arg1) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), \ - "r"(_num) \ - : "memory", "cc", "lr" \ - ); \ - _arg1; \ -}) - -#define my_syscall4(num, arg1, arg2, arg3, arg4) \ -({ \ - register long _num asm("r7") = (num); \ - register long _arg1 asm("r0") = (long)(arg1); \ - register long _arg2 asm("r1") = (long)(arg2); \ - register long _arg3 asm("r2") = (long)(arg3); \ - register long _arg4 asm("r3") = (long)(arg4); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r"(_arg1) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \ - "r"(_num) \ - : "memory", "cc", "lr" \ - ); \ - _arg1; \ -}) - -#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \ -({ \ - register long _num asm("r7") = (num); \ - register long _arg1 asm("r0") = (long)(arg1); \ - register long _arg2 asm("r1") = (long)(arg2); \ - register long _arg3 asm("r2") = (long)(arg3); \ - register long _arg4 asm("r3") = (long)(arg4); \ - register long _arg5 asm("r4") = (long)(arg5); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r" (_arg1) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \ - "r"(_num) \ - : "memory", "cc", "lr" \ - ); \ - _arg1; \ -}) - -/* startup code */ -asm(".section .text\n" - ".global _start\n" - "_start:\n" -#if defined(__THUMBEB__) || defined(__THUMBEL__) - /* We enter here in 32-bit mode but if some previous functions were in - * 16-bit mode, the assembler cannot know, so we need to tell it we're in - * 32-bit now, then switch to 16-bit (is there a better way to do it than - * adding 1 by hand ?) and tell the asm we're now in 16-bit mode so that - * it generates correct instructions. Note that we do not support thumb1. - */ - ".code 32\n" - "add r0, pc, #1\n" - "bx r0\n" - ".code 16\n" -#endif - "pop {%r0}\n" // argc was in the stack - "mov %r1, %sp\n" // argv = sp - "add %r2, %r1, %r0, lsl #2\n" // envp = argv + 4*argc ... - "add %r2, %r2, $4\n" // ... + 4 - "and %r3, %r1, $-8\n" // AAPCS : sp must be 8-byte aligned in the - "mov %sp, %r3\n" // callee, an bl doesn't push (lr=pc) - "bl main\n" // main() returns the status code, we'll exit with it. - "and %r0, %r0, $0xff\n" // limit exit code to 8 bits - "movs r7, $1\n" // NR_exit == 1 - "svc $0x00\n" - ""); - -/* fcntl / open */ -#define O_RDONLY 0 -#define O_WRONLY 1 -#define O_RDWR 2 -#define O_CREAT 0x40 -#define O_EXCL 0x80 -#define O_NOCTTY 0x100 -#define O_TRUNC 0x200 -#define O_APPEND 0x400 -#define O_NONBLOCK 0x800 -#define O_DIRECTORY 0x4000 - -/* The struct returned by the stat() syscall, 32-bit only, the syscall returns - * exactly 56 bytes (stops before the unused array). In big endian, the format - * differs as devices are returned as short only. - */ -struct sys_stat_struct { -#if defined(__ARMEB__) - unsigned short st_dev; - unsigned short __pad1; -#else - unsigned long st_dev; -#endif - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; -#if defined(__ARMEB__) - unsigned short st_rdev; - unsigned short __pad2; -#else - unsigned long st_rdev; -#endif - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused[2]; -}; - -#elif defined(__aarch64__) -/* Syscalls for AARCH64 : - * - registers are 64-bit - * - stack is 16-byte aligned - * - syscall number is passed in x8 - * - arguments are in x0, x1, x2, x3, x4, x5 - * - the system call is performed by calling svc 0 - * - syscall return comes in x0. - * - the arguments are cast to long and assigned into the target registers - * which are then simply passed as registers to the asm code, so that we - * don't have to experience issues with register constraints. - * - * On aarch64, select() is not implemented so we have to use pselect6(). - */ -#define __ARCH_WANT_SYS_PSELECT6 - -#define my_syscall0(num) \ -({ \ - register long _num asm("x8") = (num); \ - register long _arg1 asm("x0"); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r"(_arg1) \ - : "r"(_num) \ - : "memory", "cc" \ - ); \ - _arg1; \ -}) - -#define my_syscall1(num, arg1) \ -({ \ - register long _num asm("x8") = (num); \ - register long _arg1 asm("x0") = (long)(arg1); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r"(_arg1) \ - : "r"(_arg1), \ - "r"(_num) \ - : "memory", "cc" \ - ); \ - _arg1; \ -}) - -#define my_syscall2(num, arg1, arg2) \ -({ \ - register long _num asm("x8") = (num); \ - register long _arg1 asm("x0") = (long)(arg1); \ - register long _arg2 asm("x1") = (long)(arg2); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r"(_arg1) \ - : "r"(_arg1), "r"(_arg2), \ - "r"(_num) \ - : "memory", "cc" \ - ); \ - _arg1; \ -}) - -#define my_syscall3(num, arg1, arg2, arg3) \ -({ \ - register long _num asm("x8") = (num); \ - register long _arg1 asm("x0") = (long)(arg1); \ - register long _arg2 asm("x1") = (long)(arg2); \ - register long _arg3 asm("x2") = (long)(arg3); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r"(_arg1) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), \ - "r"(_num) \ - : "memory", "cc" \ - ); \ - _arg1; \ -}) - -#define my_syscall4(num, arg1, arg2, arg3, arg4) \ -({ \ - register long _num asm("x8") = (num); \ - register long _arg1 asm("x0") = (long)(arg1); \ - register long _arg2 asm("x1") = (long)(arg2); \ - register long _arg3 asm("x2") = (long)(arg3); \ - register long _arg4 asm("x3") = (long)(arg4); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r"(_arg1) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \ - "r"(_num) \ - : "memory", "cc" \ - ); \ - _arg1; \ -}) - -#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \ -({ \ - register long _num asm("x8") = (num); \ - register long _arg1 asm("x0") = (long)(arg1); \ - register long _arg2 asm("x1") = (long)(arg2); \ - register long _arg3 asm("x2") = (long)(arg3); \ - register long _arg4 asm("x3") = (long)(arg4); \ - register long _arg5 asm("x4") = (long)(arg5); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r" (_arg1) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \ - "r"(_num) \ - : "memory", "cc" \ - ); \ - _arg1; \ -}) - -#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \ -({ \ - register long _num asm("x8") = (num); \ - register long _arg1 asm("x0") = (long)(arg1); \ - register long _arg2 asm("x1") = (long)(arg2); \ - register long _arg3 asm("x2") = (long)(arg3); \ - register long _arg4 asm("x3") = (long)(arg4); \ - register long _arg5 asm("x4") = (long)(arg5); \ - register long _arg6 asm("x5") = (long)(arg6); \ - \ - asm volatile ( \ - "svc #0\n" \ - : "=r" (_arg1) \ - : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \ - "r"(_arg6), "r"(_num) \ - : "memory", "cc" \ - ); \ - _arg1; \ -}) - -/* startup code */ -asm(".section .text\n" - ".global _start\n" - "_start:\n" - "ldr x0, [sp]\n" // argc (x0) was in the stack - "add x1, sp, 8\n" // argv (x1) = sp - "lsl x2, x0, 3\n" // envp (x2) = 8*argc ... - "add x2, x2, 8\n" // + 8 (skip null) - "add x2, x2, x1\n" // + argv - "and sp, x1, -16\n" // sp must be 16-byte aligned in the callee - "bl main\n" // main() returns the status code, we'll exit with it. - "and x0, x0, 0xff\n" // limit exit code to 8 bits - "mov x8, 93\n" // NR_exit == 93 - "svc #0\n" - ""); - -/* fcntl / open */ -#define O_RDONLY 0 -#define O_WRONLY 1 -#define O_RDWR 2 -#define O_CREAT 0x40 -#define O_EXCL 0x80 -#define O_NOCTTY 0x100 -#define O_TRUNC 0x200 -#define O_APPEND 0x400 -#define O_NONBLOCK 0x800 -#define O_DIRECTORY 0x4000 - -/* The struct returned by the newfstatat() syscall. Differs slightly from the - * x86_64's stat one by field ordering, so be careful. - */ -struct sys_stat_struct { - unsigned long st_dev; - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; - unsigned int st_gid; - - unsigned long st_rdev; - unsigned long __pad1; - long st_size; - int st_blksize; - int __pad2; - - long st_blocks; - long st_atime; - unsigned long st_atime_nsec; - long st_mtime; - - unsigned long st_mtime_nsec; - long st_ctime; - unsigned long st_ctime_nsec; - unsigned int __unused[2]; -}; - -#elif defined(__mips__) && defined(_ABIO32) -/* Syscalls for MIPS ABI O32 : - * - WARNING! there's always a delayed slot! - * - WARNING again, the syntax is different, registers take a '$' and numbers - * do not. - * - registers are 32-bit - * - stack is 8-byte aligned - * - syscall number is passed in v0 (starts at 0xfa0). - * - arguments are in a0, a1, a2, a3, then the stack. The caller needs to - * leave some room in the stack for the callee to save a0..a3 if needed. - * - Many registers are clobbered, in fact only a0..a2 and s0..s8 are - * preserved. See: https://www.linux-mips.org/wiki/Syscall as well as - * scall32-o32.S in the kernel sources. - * - the system call is performed by calling "syscall" - * - syscall return comes in v0, and register a3 needs to be checked to know - * if an error occured, in which case errno is in v0. - * - the arguments are cast to long and assigned into the target registers - * which are then simply passed as registers to the asm code, so that we - * don't have to experience issues with register constraints. - */ - -#define my_syscall0(num) \ -({ \ - register long _num asm("v0") = (num); \ - register long _arg4 asm("a3"); \ - \ - asm volatile ( \ - "addiu $sp, $sp, -32\n" \ - "syscall\n" \ - "addiu $sp, $sp, 32\n" \ - : "=r"(_num), "=r"(_arg4) \ - : "r"(_num) \ - : "memory", "cc", "at", "v1", "hi", "lo", \ - \ - ); \ - _arg4 ? -_num : _num; \ -}) - -#define my_syscall1(num, arg1) \ -({ \ - register long _num asm("v0") = (num); \ - register long _arg1 asm("a0") = (long)(arg1); \ - register long _arg4 asm("a3"); \ - \ - asm volatile ( \ - "addiu $sp, $sp, -32\n" \ - "syscall\n" \ - "addiu $sp, $sp, 32\n" \ - : "=r"(_num), "=r"(_arg4) \ - : "0"(_num), \ - "r"(_arg1) \ - : "memory", "cc", "at", "v1", "hi", "lo", \ - \ - ); \ - _arg4 ? -_num : _num; \ -}) - -#define my_syscall2(num, arg1, arg2) \ -({ \ - register long _num asm("v0") = (num); \ - register long _arg1 asm("a0") = (long)(arg1); \ - register long _arg2 asm("a1") = (long)(arg2); \ - register long _arg4 asm("a3"); \ - \ - asm volatile ( \ - "addiu $sp, $sp, -32\n" \ - "syscall\n" \ - "addiu $sp, $sp, 32\n" \ - : "=r"(_num), "=r"(_arg4) \ - : "0"(_num), \ - "r"(_arg1), "r"(_arg2) \ - : "memory", "cc", "at", "v1", "hi", "lo", \ - \ - ); \ - _arg4 ? -_num : _num; \ -}) - -#define my_syscall3(num, arg1, arg2, arg3) \ -({ \ - register long _num asm("v0") = (num); \ - register long _arg1 asm("a0") = (long)(arg1); \ - register long _arg2 asm("a1") = (long)(arg2); \ - register long _arg3 asm("a2") = (long)(arg3); \ - register long _arg4 asm("a3"); \ - \ - asm volatile ( \ - "addiu $sp, $sp, -32\n" \ - "syscall\n" \ - "addiu $sp, $sp, 32\n" \ - : "=r"(_num), "=r"(_arg4) \ - : "0"(_num), \ - "r"(_arg1), "r"(_arg2), "r"(_arg3) \ - : "memory", "cc", "at", "v1", "hi", "lo", \ - \ - ); \ - _arg4 ? -_num : _num; \ -}) - -#define my_syscall4(num, arg1, arg2, arg3, arg4) \ -({ \ - register long _num asm("v0") = (num); \ - register long _arg1 asm("a0") = (long)(arg1); \ - register long _arg2 asm("a1") = (long)(arg2); \ - register long _arg3 asm("a2") = (long)(arg3); \ - register long _arg4 asm("a3") = (long)(arg4); \ - \ - asm volatile ( \ - "addiu $sp, $sp, -32\n" \ - "syscall\n" \ - "addiu $sp, $sp, 32\n" \ - : "=r" (_num), "=r"(_arg4) \ - : "0"(_num), \ - "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4) \ - : "memory", "cc", "at", "v1", "hi", "lo", \ - \ - ); \ - _arg4 ? -_num : _num; \ -}) - -#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \ -({ \ - register long _num asm("v0") = (num); \ - register long _arg1 asm("a0") = (long)(arg1); \ - register long _arg2 asm("a1") = (long)(arg2); \ - register long _arg3 asm("a2") = (long)(arg3); \ - register long _arg4 asm("a3") = (long)(arg4); \ - register long _arg5 = (long)(arg5); \ - \ - asm volatile ( \ - "addiu $sp, $sp, -32\n" \ - "sw %7, 16($sp)\n" \ - "syscall\n " \ - "addiu $sp, $sp, 32\n" \ - : "=r" (_num), "=r"(_arg4) \ - : "0"(_num), \ - "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5) \ - : "memory", "cc", "at", "v1", "hi", "lo", \ - \ - ); \ - _arg4 ? -_num : _num; \ -}) - -/* startup code, note that it's called __start on MIPS */ -asm(".section .text\n" - ".set nomips16\n" - ".global __start\n" - ".set noreorder\n" - ".option pic0\n" - ".ent __start\n" - "__start:\n" - "lw $a0,($sp)\n" // argc was in the stack - "addiu $a1, $sp, 4\n" // argv = sp + 4 - "sll $a2, $a0, 2\n" // a2 = argc * 4 - "add $a2, $a2, $a1\n" // envp = argv + 4*argc ... - "addiu $a2, $a2, 4\n" // ... + 4 - "li $t0, -8\n" - "and $sp, $sp, $t0\n" // sp must be 8-byte aligned - "addiu $sp,$sp,-16\n" // the callee expects to save a0..a3 there! - "jal main\n" // main() returns the status code, we'll exit with it. - "nop\n" // delayed slot - "and $a0, $v0, 0xff\n" // limit exit code to 8 bits - "li $v0, 4001\n" // NR_exit == 4001 - "syscall\n" - ".end __start\n" - ""); - -/* fcntl / open */ -#define O_RDONLY 0 -#define O_WRONLY 1 -#define O_RDWR 2 -#define O_APPEND 0x0008 -#define O_NONBLOCK 0x0080 -#define O_CREAT 0x0100 -#define O_TRUNC 0x0200 -#define O_EXCL 0x0400 -#define O_NOCTTY 0x0800 -#define O_DIRECTORY 0x10000 - -/* The struct returned by the stat() syscall. 88 bytes are returned by the - * syscall. - */ -struct sys_stat_struct { - unsigned int st_dev; - long st_pad1[3]; - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; - unsigned int st_gid; - unsigned int st_rdev; - long st_pad2[2]; - long st_size; - long st_pad3; - long st_atime; - long st_atime_nsec; - long st_mtime; - long st_mtime_nsec; - long st_ctime; - long st_ctime_nsec; - long st_blksize; - long st_blocks; - long st_pad4[14]; -}; - -#endif - - -/* Below are the C functions used to declare the raw syscalls. They try to be - * architecture-agnostic, and return either a success or -errno. Declaring them - * static will lead to them being inlined in most cases, but it's still possible - * to reference them by a pointer if needed. - */ -static __attribute__((unused)) -void *sys_brk(void *addr) -{ - return (void *)my_syscall1(__NR_brk, addr); -} - -static __attribute__((noreturn,unused)) -void sys_exit(int status) -{ - my_syscall1(__NR_exit, status & 255); - while(1); // shut the "noreturn" warnings. -} - -static __attribute__((unused)) -int sys_chdir(const char *path) -{ - return my_syscall1(__NR_chdir, path); -} - -static __attribute__((unused)) -int sys_chmod(const char *path, mode_t mode) -{ -#ifdef __NR_fchmodat - return my_syscall4(__NR_fchmodat, AT_FDCWD, path, mode, 0); -#else - return my_syscall2(__NR_chmod, path, mode); -#endif -} - -static __attribute__((unused)) -int sys_chown(const char *path, uid_t owner, gid_t group) -{ -#ifdef __NR_fchownat - return my_syscall5(__NR_fchownat, AT_FDCWD, path, owner, group, 0); -#else - return my_syscall3(__NR_chown, path, owner, group); -#endif -} - -static __attribute__((unused)) -int sys_chroot(const char *path) -{ - return my_syscall1(__NR_chroot, path); -} - -static __attribute__((unused)) -int sys_close(int fd) -{ - return my_syscall1(__NR_close, fd); -} - -static __attribute__((unused)) -int sys_dup(int fd) -{ - return my_syscall1(__NR_dup, fd); -} - -static __attribute__((unused)) -int sys_dup2(int old, int new) -{ - return my_syscall2(__NR_dup2, old, new); -} - -static __attribute__((unused)) -int sys_execve(const char *filename, char *const argv[], char *const envp[]) -{ - return my_syscall3(__NR_execve, filename, argv, envp); -} - -static __attribute__((unused)) -pid_t sys_fork(void) -{ - return my_syscall0(__NR_fork); -} - -static __attribute__((unused)) -int sys_fsync(int fd) -{ - return my_syscall1(__NR_fsync, fd); -} - -static __attribute__((unused)) -int sys_getdents64(int fd, struct linux_dirent64 *dirp, int count) -{ - return my_syscall3(__NR_getdents64, fd, dirp, count); -} - -static __attribute__((unused)) -pid_t sys_getpgrp(void) -{ - return my_syscall0(__NR_getpgrp); -} - -static __attribute__((unused)) -pid_t sys_getpid(void) -{ - return my_syscall0(__NR_getpid); -} - -static __attribute__((unused)) -int sys_gettimeofday(struct timeval *tv, struct timezone *tz) -{ - return my_syscall2(__NR_gettimeofday, tv, tz); -} - -static __attribute__((unused)) -int sys_ioctl(int fd, unsigned long req, void *value) -{ - return my_syscall3(__NR_ioctl, fd, req, value); -} - -static __attribute__((unused)) -int sys_kill(pid_t pid, int signal) -{ - return my_syscall2(__NR_kill, pid, signal); -} - -static __attribute__((unused)) -int sys_link(const char *old, const char *new) -{ -#ifdef __NR_linkat - return my_syscall5(__NR_linkat, AT_FDCWD, old, AT_FDCWD, new, 0); -#else - return my_syscall2(__NR_link, old, new); -#endif -} - -static __attribute__((unused)) -off_t sys_lseek(int fd, off_t offset, int whence) -{ - return my_syscall3(__NR_lseek, fd, offset, whence); -} - -static __attribute__((unused)) -int sys_mkdir(const char *path, mode_t mode) -{ -#ifdef __NR_mkdirat - return my_syscall3(__NR_mkdirat, AT_FDCWD, path, mode); -#else - return my_syscall2(__NR_mkdir, path, mode); -#endif -} - -static __attribute__((unused)) -long sys_mknod(const char *path, mode_t mode, dev_t dev) -{ -#ifdef __NR_mknodat - return my_syscall4(__NR_mknodat, AT_FDCWD, path, mode, dev); -#else - return my_syscall3(__NR_mknod, path, mode, dev); -#endif -} - -static __attribute__((unused)) -int sys_mount(const char *src, const char *tgt, const char *fst, - unsigned long flags, const void *data) -{ - return my_syscall5(__NR_mount, src, tgt, fst, flags, data); -} - -static __attribute__((unused)) -int sys_open(const char *path, int flags, mode_t mode) -{ -#ifdef __NR_openat - return my_syscall4(__NR_openat, AT_FDCWD, path, flags, mode); -#else - return my_syscall3(__NR_open, path, flags, mode); -#endif -} - -static __attribute__((unused)) -int sys_pivot_root(const char *new, const char *old) -{ - return my_syscall2(__NR_pivot_root, new, old); -} - -static __attribute__((unused)) -int sys_poll(struct pollfd *fds, int nfds, int timeout) -{ - return my_syscall3(__NR_poll, fds, nfds, timeout); -} - -static __attribute__((unused)) -ssize_t sys_read(int fd, void *buf, size_t count) -{ - return my_syscall3(__NR_read, fd, buf, count); -} - -static __attribute__((unused)) -ssize_t sys_reboot(int magic1, int magic2, int cmd, void *arg) -{ - return my_syscall4(__NR_reboot, magic1, magic2, cmd, arg); -} - -static __attribute__((unused)) -int sys_sched_yield(void) -{ - return my_syscall0(__NR_sched_yield); -} - -static __attribute__((unused)) -int sys_select(int nfds, fd_set *rfds, fd_set *wfds, fd_set *efds, struct timeval *timeout) -{ -#if defined(__ARCH_WANT_SYS_OLD_SELECT) && !defined(__NR__newselect) - struct sel_arg_struct { - unsigned long n; - fd_set *r, *w, *e; - struct timeval *t; - } arg = { .n = nfds, .r = rfds, .w = wfds, .e = efds, .t = timeout }; - return my_syscall1(__NR_select, &arg); -#elif defined(__ARCH_WANT_SYS_PSELECT6) && defined(__NR_pselect6) - struct timespec t; - - if (timeout) { - t.tv_sec = timeout->tv_sec; - t.tv_nsec = timeout->tv_usec * 1000; - } - return my_syscall6(__NR_pselect6, nfds, rfds, wfds, efds, timeout ? &t : NULL, NULL); -#else -#ifndef __NR__newselect -#define __NR__newselect __NR_select -#endif - return my_syscall5(__NR__newselect, nfds, rfds, wfds, efds, timeout); -#endif -} - -static __attribute__((unused)) -int sys_setpgid(pid_t pid, pid_t pgid) -{ - return my_syscall2(__NR_setpgid, pid, pgid); -} - -static __attribute__((unused)) -pid_t sys_setsid(void) -{ - return my_syscall0(__NR_setsid); -} - -static __attribute__((unused)) -int sys_stat(const char *path, struct stat *buf) -{ - struct sys_stat_struct stat; - long ret; - -#ifdef __NR_newfstatat - /* only solution for arm64 */ - ret = my_syscall4(__NR_newfstatat, AT_FDCWD, path, &stat, 0); -#else - ret = my_syscall2(__NR_stat, path, &stat); -#endif - buf->st_dev = stat.st_dev; - buf->st_ino = stat.st_ino; - buf->st_mode = stat.st_mode; - buf->st_nlink = stat.st_nlink; - buf->st_uid = stat.st_uid; - buf->st_gid = stat.st_gid; - buf->st_rdev = stat.st_rdev; - buf->st_size = stat.st_size; - buf->st_blksize = stat.st_blksize; - buf->st_blocks = stat.st_blocks; - buf->st_atime = stat.st_atime; - buf->st_mtime = stat.st_mtime; - buf->st_ctime = stat.st_ctime; - return ret; -} - - -static __attribute__((unused)) -int sys_symlink(const char *old, const char *new) -{ -#ifdef __NR_symlinkat - return my_syscall3(__NR_symlinkat, old, AT_FDCWD, new); -#else - return my_syscall2(__NR_symlink, old, new); -#endif -} - -static __attribute__((unused)) -mode_t sys_umask(mode_t mode) -{ - return my_syscall1(__NR_umask, mode); -} - -static __attribute__((unused)) -int sys_umount2(const char *path, int flags) -{ - return my_syscall2(__NR_umount2, path, flags); -} - -static __attribute__((unused)) -int sys_unlink(const char *path) -{ -#ifdef __NR_unlinkat - return my_syscall3(__NR_unlinkat, AT_FDCWD, path, 0); -#else - return my_syscall1(__NR_unlink, path); -#endif -} - -static __attribute__((unused)) -pid_t sys_wait4(pid_t pid, int *status, int options, struct rusage *rusage) -{ - return my_syscall4(__NR_wait4, pid, status, options, rusage); -} - -static __attribute__((unused)) -pid_t sys_waitpid(pid_t pid, int *status, int options) -{ - return sys_wait4(pid, status, options, 0); -} - -static __attribute__((unused)) -pid_t sys_wait(int *status) -{ - return sys_waitpid(-1, status, 0); -} - -static __attribute__((unused)) -ssize_t sys_write(int fd, const void *buf, size_t count) -{ - return my_syscall3(__NR_write, fd, buf, count); -} - - -/* Below are the libc-compatible syscalls which return x or -1 and set errno. - * They rely on the functions above. Similarly they're marked static so that it - * is possible to assign pointers to them if needed. - */ - -static __attribute__((unused)) -int brk(void *addr) -{ - void *ret = sys_brk(addr); - - if (!ret) { - SET_ERRNO(ENOMEM); - return -1; - } - return 0; -} - -static __attribute__((noreturn,unused)) -void exit(int status) -{ - sys_exit(status); -} - -static __attribute__((unused)) -int chdir(const char *path) -{ - int ret = sys_chdir(path); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int chmod(const char *path, mode_t mode) -{ - int ret = sys_chmod(path, mode); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int chown(const char *path, uid_t owner, gid_t group) -{ - int ret = sys_chown(path, owner, group); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int chroot(const char *path) -{ - int ret = sys_chroot(path); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int close(int fd) -{ - int ret = sys_close(fd); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int dup2(int old, int new) -{ - int ret = sys_dup2(old, new); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int execve(const char *filename, char *const argv[], char *const envp[]) -{ - int ret = sys_execve(filename, argv, envp); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -pid_t fork(void) -{ - pid_t ret = sys_fork(); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int fsync(int fd) -{ - int ret = sys_fsync(fd); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int getdents64(int fd, struct linux_dirent64 *dirp, int count) -{ - int ret = sys_getdents64(fd, dirp, count); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -pid_t getpgrp(void) -{ - pid_t ret = sys_getpgrp(); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -pid_t getpid(void) -{ - pid_t ret = sys_getpid(); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int gettimeofday(struct timeval *tv, struct timezone *tz) -{ - int ret = sys_gettimeofday(tv, tz); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int ioctl(int fd, unsigned long req, void *value) -{ - int ret = sys_ioctl(fd, req, value); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int kill(pid_t pid, int signal) -{ - int ret = sys_kill(pid, signal); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int link(const char *old, const char *new) -{ - int ret = sys_link(old, new); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -off_t lseek(int fd, off_t offset, int whence) -{ - off_t ret = sys_lseek(fd, offset, whence); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int mkdir(const char *path, mode_t mode) -{ - int ret = sys_mkdir(path, mode); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int mknod(const char *path, mode_t mode, dev_t dev) -{ - int ret = sys_mknod(path, mode, dev); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int mount(const char *src, const char *tgt, - const char *fst, unsigned long flags, - const void *data) -{ - int ret = sys_mount(src, tgt, fst, flags, data); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int open(const char *path, int flags, mode_t mode) -{ - int ret = sys_open(path, flags, mode); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int pivot_root(const char *new, const char *old) -{ - int ret = sys_pivot_root(new, old); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int poll(struct pollfd *fds, int nfds, int timeout) -{ - int ret = sys_poll(fds, nfds, timeout); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -ssize_t read(int fd, void *buf, size_t count) -{ - ssize_t ret = sys_read(fd, buf, count); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int reboot(int cmd) -{ - int ret = sys_reboot(LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, cmd, 0); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -void *sbrk(intptr_t inc) -{ - void *ret; - - /* first call to find current end */ - if ((ret = sys_brk(0)) && (sys_brk(ret + inc) == ret + inc)) - return ret + inc; - - SET_ERRNO(ENOMEM); - return (void *)-1; -} - -static __attribute__((unused)) -int sched_yield(void) -{ - int ret = sys_sched_yield(); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int select(int nfds, fd_set *rfds, fd_set *wfds, fd_set *efds, struct timeval *timeout) -{ - int ret = sys_select(nfds, rfds, wfds, efds, timeout); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int setpgid(pid_t pid, pid_t pgid) -{ - int ret = sys_setpgid(pid, pgid); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -pid_t setsid(void) -{ - pid_t ret = sys_setsid(); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -unsigned int sleep(unsigned int seconds) -{ - struct timeval my_timeval = { seconds, 0 }; - - if (sys_select(0, 0, 0, 0, &my_timeval) < 0) - return my_timeval.tv_sec + !!my_timeval.tv_usec; - else - return 0; -} - -static __attribute__((unused)) -int stat(const char *path, struct stat *buf) -{ - int ret = sys_stat(path, buf); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int symlink(const char *old, const char *new) -{ - int ret = sys_symlink(old, new); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int tcsetpgrp(int fd, pid_t pid) -{ - return ioctl(fd, TIOCSPGRP, &pid); -} - -static __attribute__((unused)) -mode_t umask(mode_t mode) -{ - return sys_umask(mode); -} - -static __attribute__((unused)) -int umount2(const char *path, int flags) -{ - int ret = sys_umount2(path, flags); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -int unlink(const char *path) -{ - int ret = sys_unlink(path); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -pid_t wait4(pid_t pid, int *status, int options, struct rusage *rusage) -{ - pid_t ret = sys_wait4(pid, status, options, rusage); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -pid_t waitpid(pid_t pid, int *status, int options) -{ - pid_t ret = sys_waitpid(pid, status, options); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -pid_t wait(int *status) -{ - pid_t ret = sys_wait(status); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -static __attribute__((unused)) -ssize_t write(int fd, const void *buf, size_t count) -{ - ssize_t ret = sys_write(fd, buf, count); - - if (ret < 0) { - SET_ERRNO(-ret); - ret = -1; - } - return ret; -} - -/* some size-optimized reimplementations of a few common str* and mem* - * functions. They're marked static, except memcpy() and raise() which are used - * by libgcc on ARM, so they are marked weak instead in order not to cause an - * error when building a program made of multiple files (not recommended). - */ - -static __attribute__((unused)) -void *memmove(void *dst, const void *src, size_t len) -{ - ssize_t pos = (dst <= src) ? -1 : (long)len; - void *ret = dst; - - while (len--) { - pos += (dst <= src) ? 1 : -1; - ((char *)dst)[pos] = ((char *)src)[pos]; - } - return ret; -} - -static __attribute__((unused)) -void *memset(void *dst, int b, size_t len) -{ - char *p = dst; - - while (len--) - *(p++) = b; - return dst; -} - -static __attribute__((unused)) -int memcmp(const void *s1, const void *s2, size_t n) -{ - size_t ofs = 0; - char c1 = 0; - - while (ofs < n && !(c1 = ((char *)s1)[ofs] - ((char *)s2)[ofs])) { - ofs++; - } - return c1; -} - -static __attribute__((unused)) -char *strcpy(char *dst, const char *src) -{ - char *ret = dst; - - while ((*dst++ = *src++)); - return ret; -} - -static __attribute__((unused)) -char *strchr(const char *s, int c) -{ - while (*s) { - if (*s == (char)c) - return (char *)s; - s++; - } - return NULL; -} - -static __attribute__((unused)) -char *strrchr(const char *s, int c) -{ - const char *ret = NULL; - - while (*s) { - if (*s == (char)c) - ret = s; - s++; - } - return (char *)ret; -} - -static __attribute__((unused)) -size_t nolibc_strlen(const char *str) -{ - size_t len; - - for (len = 0; str[len]; len++); - return len; -} - -#define strlen(str) ({ \ - __builtin_constant_p((str)) ? \ - __builtin_strlen((str)) : \ - nolibc_strlen((str)); \ -}) - -static __attribute__((unused)) -int isdigit(int c) -{ - return (unsigned int)(c - '0') <= 9; -} - -static __attribute__((unused)) -long atol(const char *s) -{ - unsigned long ret = 0; - unsigned long d; - int neg = 0; - - if (*s == '-') { - neg = 1; - s++; - } - - while (1) { - d = (*s++) - '0'; - if (d > 9) - break; - ret *= 10; - ret += d; - } - - return neg ? -ret : ret; -} - -static __attribute__((unused)) -int atoi(const char *s) -{ - return atol(s); -} - -static __attribute__((unused)) -const char *ltoa(long in) -{ - /* large enough for -9223372036854775808 */ - static char buffer[21]; - char *pos = buffer + sizeof(buffer) - 1; - int neg = in < 0; - unsigned long n = neg ? -in : in; - - *pos-- = '\0'; - do { - *pos-- = '0' + n % 10; - n /= 10; - if (pos < buffer) - return pos + 1; - } while (n); - - if (neg) - *pos-- = '-'; - return pos + 1; -} - -__attribute__((weak,unused)) -void *memcpy(void *dst, const void *src, size_t len) -{ - return memmove(dst, src, len); -} - -/* needed by libgcc for divide by zero */ -__attribute__((weak,unused)) -int raise(int signal) -{ - return kill(getpid(), signal); -} - -/* Here come a few helper functions */ - -static __attribute__((unused)) -void FD_ZERO(fd_set *set) -{ - memset(set, 0, sizeof(*set)); -} - -static __attribute__((unused)) -void FD_SET(int fd, fd_set *set) -{ - if (fd < 0 || fd >= FD_SETSIZE) - return; - set->fd32[fd / 32] |= 1 << (fd & 31); -} - -/* WARNING, it only deals with the 4096 first majors and 256 first minors */ -static __attribute__((unused)) -dev_t makedev(unsigned int major, unsigned int minor) -{ - return ((major & 0xfff) << 8) | (minor & 0xff); -} |