diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c | 2 | ||||
| -rw-r--r-- | tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c | 2 | ||||
| -rw-r--r-- | tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c | 2 | ||||
| -rw-r--r-- | tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h | 2 | ||||
| -rwxr-xr-x | tools/testing/ktest/ktest.pl | 16 | ||||
| -rw-r--r-- | tools/testing/ktest/sample.conf | 22 | ||||
| -rw-r--r-- | tools/testing/selftests/lkdtm/.gitignore | 2 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/fib_tests.sh | 34 | ||||
| -rw-r--r-- | tools/testing/selftests/pidfd/.gitignore | 1 | ||||
| -rw-r--r-- | tools/testing/selftests/tc-testing/config | 1 |
10 files changed, 59 insertions, 25 deletions
diff --git a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c index 33dc34db4f3c..20f46348271b 100644 --- a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c +++ b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c @@ -82,7 +82,7 @@ static struct pci_access *pci_acc; static struct pci_dev *amd_fam14h_pci_dev; static int nbp1_entered; -struct timespec start_time; +static struct timespec start_time; static unsigned long long timediff; #ifdef DEBUG diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c index 3c4cee160b0e..a65f7d011513 100644 --- a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c +++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c @@ -19,7 +19,7 @@ struct cpuidle_monitor cpuidle_sysfs_monitor; static unsigned long long **previous_count; static unsigned long long **current_count; -struct timespec start_time; +static struct timespec start_time; static unsigned long long timediff; static int cpuidle_get_count_percent(unsigned int id, double *percent, diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c index 6d44fec55ad5..7c77045fef52 100644 --- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c +++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c @@ -27,6 +27,8 @@ struct cpuidle_monitor *all_monitors[] = { 0 }; +int cpu_count; + static struct cpuidle_monitor *monitors[MONITORS_MAX]; static unsigned int avail_monitors; diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h index 5b5eb1da0cce..c559d3115330 100644 --- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h +++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h @@ -25,7 +25,7 @@ #endif #define CSTATE_DESC_LEN 60 -int cpu_count; +extern int cpu_count; /* Hard to define the right names ...: */ enum power_range_e { diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 220d04f958a6..7570e36d636d 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -30,7 +30,7 @@ my %default = ( "EMAIL_WHEN_STARTED" => 0, "NUM_TESTS" => 1, "TEST_TYPE" => "build", - "BUILD_TYPE" => "randconfig", + "BUILD_TYPE" => "oldconfig", "MAKE_CMD" => "make", "CLOSE_CONSOLE_SIGNAL" => "INT", "TIMEOUT" => 120, @@ -1030,7 +1030,7 @@ sub __read_config { } if (!$skip && $rest !~ /^\s*$/) { - die "$name: $.: Gargbage found after $type\n$_"; + die "$name: $.: Garbage found after $type\n$_"; } if ($skip && $type eq "TEST_START") { @@ -1063,7 +1063,7 @@ sub __read_config { } if ($rest !~ /^\s*$/) { - die "$name: $.: Gargbage found after DEFAULTS\n$_"; + die "$name: $.: Garbage found after DEFAULTS\n$_"; } } elsif (/^\s*INCLUDE\s+(\S+)/) { @@ -1154,7 +1154,7 @@ sub __read_config { # on of these sections that have SKIP defined. # The save variable can be # defined multiple times and the new one simply overrides - # the prevous one. + # the previous one. set_variable($lvalue, $rvalue); } else { @@ -1234,7 +1234,7 @@ sub read_config { foreach my $option (keys %not_used) { print "$option\n"; } - print "Set IGRNORE_UNUSED = 1 to have ktest ignore unused variables\n"; + print "Set IGNORE_UNUSED = 1 to have ktest ignore unused variables\n"; if (!read_yn "Do you want to continue?") { exit -1; } @@ -1345,7 +1345,7 @@ sub eval_option { # Check for recursive evaluations. # 100 deep should be more than enough. if ($r++ > 100) { - die "Over 100 evaluations accurred with $option\n" . + die "Over 100 evaluations occurred with $option\n" . "Check for recursive variables\n"; } $prev = $option; @@ -1383,7 +1383,7 @@ sub reboot { } else { # Make sure everything has been written to disk - run_ssh("sync"); + run_ssh("sync", 10); if (defined($time)) { start_monitor; @@ -1461,7 +1461,7 @@ sub get_test_name() { sub dodie { - # avoid recusion + # avoid recursion return if ($in_die); $in_die = 1; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index c3bc933d437b..27666b8007ed 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -10,7 +10,7 @@ # # Options set in the beginning of the file are considered to be -# default options. These options can be overriden by test specific +# default options. These options can be overridden by test specific # options, with the following exceptions: # # LOG_FILE @@ -204,7 +204,7 @@ # # This config file can also contain "config variables". # These are assigned with ":=" instead of the ktest option -# assigment "=". +# assignment "=". # # The difference between ktest options and config variables # is that config variables can be used multiple times, @@ -263,7 +263,7 @@ #### Using options in other options #### # # Options that are defined in the config file may also be used -# by other options. All options are evaulated at time of +# by other options. All options are evaluated at time of # use (except that config variables are evaluated at config # processing time). # @@ -505,7 +505,7 @@ #TEST = ssh user@machine /root/run_test # The build type is any make config type or special command -# (default randconfig) +# (default oldconfig) # nobuild - skip the clean and build step # useconfig:/path/to/config - use the given config and run # oldconfig on it. @@ -707,7 +707,7 @@ # Line to define a successful boot up in console output. # This is what the line contains, not the entire line. If you need -# the entire line to match, then use regural expression syntax like: +# the entire line to match, then use regular expression syntax like: # (do not add any quotes around it) # # SUCCESS_LINE = ^MyBox Login:$ @@ -839,7 +839,7 @@ # (ignored if POWEROFF_ON_SUCCESS is set) #REBOOT_ON_SUCCESS = 1 -# In case there are isses with rebooting, you can specify this +# In case there are issues with rebooting, you can specify this # to always powercycle after this amount of time after calling # reboot. # Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just @@ -848,7 +848,7 @@ # (default undefined) #POWERCYCLE_AFTER_REBOOT = 5 -# In case there's isses with halting, you can specify this +# In case there's issues with halting, you can specify this # to always poweroff after this amount of time after calling # halt. # Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just @@ -972,7 +972,7 @@ # # PATCHCHECK_START is required and is the first patch to # test (the SHA1 of the commit). You may also specify anything -# that git checkout allows (branch name, tage, HEAD~3). +# that git checkout allows (branch name, tag, HEAD~3). # # PATCHCHECK_END is the last patch to check (default HEAD) # @@ -994,7 +994,7 @@ # IGNORE_WARNINGS is set for the given commit's sha1 # # IGNORE_WARNINGS can be used to disable the failure of patchcheck -# on a particuler commit (SHA1). You can add more than one commit +# on a particular commit (SHA1). You can add more than one commit # by adding a list of SHA1s that are space delimited. # # If BUILD_NOCLEAN is set, then make mrproper will not be run on @@ -1093,7 +1093,7 @@ # whatever reason. (Can't reboot, want to inspect each iteration) # Doing a BISECT_MANUAL will have the test wait for you to # tell it if the test passed or failed after each iteration. -# This is basicall the same as running git bisect yourself +# This is basically the same as running git bisect yourself # but ktest will rebuild and install the kernel for you. # # BISECT_CHECK = 1 (optional, default 0) @@ -1239,7 +1239,7 @@ # # CONFIG_BISECT_EXEC (optional) # The config bisect is a separate program that comes with ktest.pl. -# By befault, it will look for: +# By default, it will look for: # `pwd`/config-bisect.pl # the location ktest.pl was executed from. # If it does not find it there, it will look for: # `dirname <ktest.pl>`/config-bisect.pl # The directory that holds ktest.pl diff --git a/tools/testing/selftests/lkdtm/.gitignore b/tools/testing/selftests/lkdtm/.gitignore new file mode 100644 index 000000000000..f26212605b6b --- /dev/null +++ b/tools/testing/selftests/lkdtm/.gitignore @@ -0,0 +1,2 @@ +*.sh +!run.sh diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh index 60273f1bc7d9..b7616704b55e 100755 --- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -1041,6 +1041,27 @@ ipv6_addr_metric_test() fi log_test $rc 0 "Prefix route with metric on link up" + # verify peer metric added correctly + set -e + run_cmd "$IP -6 addr flush dev dummy2" + run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::1 peer 2001:db8:104::2 metric 260" + set +e + + check_route6 "2001:db8:104::1 dev dummy2 proto kernel metric 260" + log_test $? 0 "Set metric with peer route on local side" + log_test $? 0 "User specified metric on local address" + check_route6 "2001:db8:104::2 dev dummy2 proto kernel metric 260" + log_test $? 0 "Set metric with peer route on peer side" + + set -e + run_cmd "$IP -6 addr change dev dummy2 2001:db8:104::1 peer 2001:db8:104::3 metric 261" + set +e + + check_route6 "2001:db8:104::1 dev dummy2 proto kernel metric 261" + log_test $? 0 "Modify metric and peer address on local side" + check_route6 "2001:db8:104::3 dev dummy2 proto kernel metric 261" + log_test $? 0 "Modify metric and peer address on peer side" + $IP li del dummy1 $IP li del dummy2 cleanup @@ -1457,13 +1478,20 @@ ipv4_addr_metric_test() run_cmd "$IP addr flush dev dummy2" run_cmd "$IP addr add dev dummy2 172.16.104.1/32 peer 172.16.104.2 metric 260" - run_cmd "$IP addr change dev dummy2 172.16.104.1/32 peer 172.16.104.2 metric 261" rc=$? if [ $rc -eq 0 ]; then - check_route "172.16.104.2 dev dummy2 proto kernel scope link src 172.16.104.1 metric 261" + check_route "172.16.104.2 dev dummy2 proto kernel scope link src 172.16.104.1 metric 260" + rc=$? + fi + log_test $rc 0 "Set metric of address with peer route" + + run_cmd "$IP addr change dev dummy2 172.16.104.1/32 peer 172.16.104.3 metric 261" + rc=$? + if [ $rc -eq 0 ]; then + check_route "172.16.104.3 dev dummy2 proto kernel scope link src 172.16.104.1 metric 261" rc=$? fi - log_test $rc 0 "Modify metric of address with peer route" + log_test $rc 0 "Modify metric and peer address for peer route" $IP li del dummy1 $IP li del dummy2 diff --git a/tools/testing/selftests/pidfd/.gitignore b/tools/testing/selftests/pidfd/.gitignore index 3a779c084d96..39559d723c41 100644 --- a/tools/testing/selftests/pidfd/.gitignore +++ b/tools/testing/selftests/pidfd/.gitignore @@ -2,4 +2,5 @@ pidfd_open_test pidfd_poll_test pidfd_test pidfd_wait +pidfd_fdinfo_test pidfd_getfd_test diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index 477bc61b374a..c03af4600281 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -57,3 +57,4 @@ CONFIG_NET_IFE_SKBMARK=m CONFIG_NET_IFE_SKBPRIO=m CONFIG_NET_IFE_SKBTCINDEX=m CONFIG_NET_SCH_FIFO=y +CONFIG_NET_SCH_ETS=m |