diff options
Diffstat (limited to 'usr')
| -rw-r--r-- | usr/Makefile | 42 | ||||
| -rw-r--r-- | usr/initramfs_data.S | 2 | ||||
| -rw-r--r-- | usr/initramfs_data.bz2.S | 29 | ||||
| -rw-r--r-- | usr/initramfs_data.gz.S | 29 | ||||
| -rw-r--r-- | usr/initramfs_data.lzma.S | 29 |
5 files changed, 118 insertions, 13 deletions
diff --git a/usr/Makefile b/usr/Makefile index 201f27f8cbaf..451cdff7dff9 100644 --- a/usr/Makefile +++ b/usr/Makefile @@ -5,14 +5,32 @@ klibcdirs:; PHONY += klibcdirs +# Find out "preferred" ramdisk compressor. Order of preference is +# 1. bzip2 efficient, and likely to be present +# 2. gzip former default +# 3. lzma +# 4. none + +# None of the above +suffix_y = + +# Lzma, but no gzip nor bzip2 +suffix_$(CONFIG_RD_LZMA) = .lzma + +# Gzip, but no bzip2 +suffix_$(CONFIG_RD_GZIP) = .gz + +# Bzip2 +suffix_$(CONFIG_RD_BZIP2) = .bz2 + # Generate builtin.o based on initramfs_data.o -obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data.o +obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data$(suffix_y).o -# initramfs_data.o contains the initramfs_data.cpio.gz image. +# initramfs_data.o contains the compressed initramfs_data.cpio image. # The image is included using .incbin, a dependency which is not # tracked automatically. -$(obj)/initramfs_data.o: $(obj)/initramfs_data.cpio.gz FORCE +$(obj)/initramfs_data$(suffix_y).o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE ##### # Generate the initramfs cpio archive @@ -25,28 +43,28 @@ ramfs-args := \ $(if $(CONFIG_INITRAMFS_ROOT_UID), -u $(CONFIG_INITRAMFS_ROOT_UID)) \ $(if $(CONFIG_INITRAMFS_ROOT_GID), -g $(CONFIG_INITRAMFS_ROOT_GID)) -# .initramfs_data.cpio.gz.d is used to identify all files included +# .initramfs_data.cpio.d is used to identify all files included # in initramfs and to detect if any files are added/removed. # Removed files are identified by directory timestamp being updated # The dependency list is generated by gen_initramfs.sh -l -ifneq ($(wildcard $(obj)/.initramfs_data.cpio.gz.d),) - include $(obj)/.initramfs_data.cpio.gz.d +ifneq ($(wildcard $(obj)/.initramfs_data.cpio.d),) + include $(obj)/.initramfs_data.cpio.d endif quiet_cmd_initfs = GEN $@ cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input) -targets := initramfs_data.cpio.gz +targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 initramfs_data.cpio.lzma initramfs_data.cpio # do not try to update files included in initramfs $(deps_initramfs): ; $(deps_initramfs): klibcdirs -# We rebuild initramfs_data.cpio.gz if: -# 1) Any included file is newer then initramfs_data.cpio.gz +# We rebuild initramfs_data.cpio if: +# 1) Any included file is newer then initramfs_data.cpio # 2) There are changes in which files are included (added or deleted) -# 3) If gen_init_cpio are newer than initramfs_data.cpio.gz +# 3) If gen_init_cpio are newer than initramfs_data.cpio # 4) arguments to gen_initramfs.sh changes -$(obj)/initramfs_data.cpio.gz: $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs - $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.gz.d +$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs + $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.d $(call if_changed,initfs) diff --git a/usr/initramfs_data.S b/usr/initramfs_data.S index c2e1ad424f4a..7c6973d8d829 100644 --- a/usr/initramfs_data.S +++ b/usr/initramfs_data.S @@ -26,5 +26,5 @@ SECTIONS */ .section .init.ramfs,"a" -.incbin "usr/initramfs_data.cpio.gz" +.incbin "usr/initramfs_data.cpio" diff --git a/usr/initramfs_data.bz2.S b/usr/initramfs_data.bz2.S new file mode 100644 index 000000000000..bc54d090365c --- /dev/null +++ b/usr/initramfs_data.bz2.S @@ -0,0 +1,29 @@ +/* + initramfs_data includes the compressed binary that is the + filesystem used for early user space. + Note: Older versions of "as" (prior to binutils 2.11.90.0.23 + released on 2001-07-14) dit not support .incbin. + If you are forced to use older binutils than that then the + following trick can be applied to create the resulting binary: + + + ld -m elf_i386 --format binary --oformat elf32-i386 -r \ + -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o + ld -m elf_i386 -r -o built-in.o initramfs_data.o + + initramfs_data.scr looks like this: +SECTIONS +{ + .init.ramfs : { *(.data) } +} + + The above example is for i386 - the parameters vary from architectures. + Eventually look up LDFLAGS_BLOB in an older version of the + arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. + + Using .incbin has the advantage over ld that the correct flags are set + in the ELF header, as required by certain architectures. +*/ + +.section .init.ramfs,"a" +.incbin "usr/initramfs_data.cpio.bz2" diff --git a/usr/initramfs_data.gz.S b/usr/initramfs_data.gz.S new file mode 100644 index 000000000000..890c8dd1d6bd --- /dev/null +++ b/usr/initramfs_data.gz.S @@ -0,0 +1,29 @@ +/* + initramfs_data includes the compressed binary that is the + filesystem used for early user space. + Note: Older versions of "as" (prior to binutils 2.11.90.0.23 + released on 2001-07-14) dit not support .incbin. + If you are forced to use older binutils than that then the + following trick can be applied to create the resulting binary: + + + ld -m elf_i386 --format binary --oformat elf32-i386 -r \ + -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o + ld -m elf_i386 -r -o built-in.o initramfs_data.o + + initramfs_data.scr looks like this: +SECTIONS +{ + .init.ramfs : { *(.data) } +} + + The above example is for i386 - the parameters vary from architectures. + Eventually look up LDFLAGS_BLOB in an older version of the + arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. + + Using .incbin has the advantage over ld that the correct flags are set + in the ELF header, as required by certain architectures. +*/ + +.section .init.ramfs,"a" +.incbin "usr/initramfs_data.cpio.gz" diff --git a/usr/initramfs_data.lzma.S b/usr/initramfs_data.lzma.S new file mode 100644 index 000000000000..e11469e48562 --- /dev/null +++ b/usr/initramfs_data.lzma.S @@ -0,0 +1,29 @@ +/* + initramfs_data includes the compressed binary that is the + filesystem used for early user space. + Note: Older versions of "as" (prior to binutils 2.11.90.0.23 + released on 2001-07-14) dit not support .incbin. + If you are forced to use older binutils than that then the + following trick can be applied to create the resulting binary: + + + ld -m elf_i386 --format binary --oformat elf32-i386 -r \ + -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o + ld -m elf_i386 -r -o built-in.o initramfs_data.o + + initramfs_data.scr looks like this: +SECTIONS +{ + .init.ramfs : { *(.data) } +} + + The above example is for i386 - the parameters vary from architectures. + Eventually look up LDFLAGS_BLOB in an older version of the + arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. + + Using .incbin has the advantage over ld that the correct flags are set + in the ELF header, as required by certain architectures. +*/ + +.section .init.ramfs,"a" +.incbin "usr/initramfs_data.cpio.lzma" |