aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-29wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmdYedidya Benshimol
The BIGTK cipher field was added to the kek_kck_material_cmd but wasn't assigned. Fix that by differentiating between the IGTK/BIGTK keys and assign the ciphers fields accordingly. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.7fd0b22b7267.Ie9b581652b74bd7806980364d59e1b2e78e682c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: remove stale STA link data during restartBenjamin Berg
If pre-recovery mac80211 tried to disable a link but this disablement failed, then there might be a mismatch between mac80211 assuming the link has been disabled and the driver still having the data around. During recover itself, that is not a problem, but should the link be activated again at a later point, iwlwifi will refuse the activation as it detects the inconsistent state. Solve this corner-case by iterating the station in the restart cleanup handler. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.d2fd60338055.I840d4fdce5fd49fe69896d928b071067e3730259@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdefShahar S Matityahu
The driver should call iwl_dbg_tlv_free even if debugfs is not defined since ini mode does not depend on debugfs ifdef. Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.c8e3723f55b0.I5e805732b0be31ee6b83c642ec652a34e974ff10@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: set properly mac headerMordechay Goodstein
In the driver we only use skb_put* for adding data to the skb, hence data never moves and skb_reset_mac_haeder would set mac_header to the first time data was added and not to mac80211 header, fix this my using the actual len of bytes added for setting the mac header. Fixes: 3f7a9d577d47 ("wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.12f2de2909c3.I72a819b96f2fe55bde192a8fd31a4b96c301aa73@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64Johannes Berg
We don't actually support >64 even for HE devices, so revert back to 64. This fixes an issue where the session is refused because the queue is configured differently from the actual session later. Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookupYedidya Benshimol
After moving from commands to notificaitons in the d3 resume flow, removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes the return of the default value when looking up their version. Returning zero here results in the driver sending the not supported NON_QOS_TX_COUNTER_CMD. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.8cabfd580614.If3a0db9851f56041f8f5360959354abd5379224a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: fix a crash on 7265Emmanuel Grumbach
Since IWL_FW_CMD_VER_UNKNOWN = 99, then my change to consider cmd_ver >= 7 instead of cmd_ver = 7 included also firmwares that don't advertise the command version at all. This made us send a command with a bad size and because of that, the firmware hit a BAD_COMMAND immediately after handling the REDUCE_TX_POWER_CMD command. Fixes: 8f892e225f41 ("wifi: iwlwifi: mvm: support iwl_dev_tx_power_cmd_v8") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512072733.eb20ff5050d3.Ie4fc6f5496cd296fd6ff20d15e98676f28a3cccd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: always set the TWT IE offsetShaul Triebitz
In beacon template version 14, make sure to always set the TWT IE offset before sending the beacon template command, also in the debugfs inject_beacon_ie path. If the TWT IE does not exist, the offset will be set to zero. Fixes: bf0212fd8faa ("wifi: iwlwifi: mvm: add beacon template version 14") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.eb27175c345a.If30ef24aba10fe47fd42a7a9703eb8903035e294@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: don't initialize csa_work twiceMiri Korenblit
The initialization of this worker moved to iwl_mvm_mac_init_mvmvif but we removed only from the pre-MLD version of the add_interface callback. Remove it also from the MLD version. Fixes: 0bcc2155983e ("wifi: iwlwifi: mvm: init vif works only once") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240512152312.4f15b41604f0.Iec912158e5a706175531d3736d77d25adf02fba4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: mac80211: pass proper link id for channel switch started notificationAditya Kumar Singh
Original changes[1] posted is having proper changes. However, at the same time, there was chandef puncturing changes which had a conflict with this. While applying, two errors crept in - a) Whitespace error. b) Link ID being passed to channel switch started notifier function is 0. However proper link ID is present in the function. Fix these now. [1] https://lore.kernel.org/all/20240130140918.1172387-5-quic_adisi@quicinc.com/ Fixes: 1a96bb4e8a79 ("wifi: mac80211: start and finalize channel switch on link basis") Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240509032555.263933-1-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: fix 6 GHz scan request buildingJohannes Berg
The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is meant to be formed this way: [base struct][channels][ssids][6ghz_params] It is allocated with [channels] as the maximum number of channels supported by the driver in the 6 GHz band, since allocation is before knowing how many there will be. However, the inner pointers are set incorrectly: initially, the 6 GHz scan parameters pointer is set: [base struct][channels] ^ scan_6ghz_params and later the SSID pointer is set to the end of the actually _used_ channels. [base struct][channels] ^ ssids If many APs were to be discovered, and many channels used, and there were many SSIDs, then the SSIDs could overlap the 6 GHz parameters. Additionally, the request->ssids for most of the function points to the original request still (given the struct copy) but is used normally, which is confusing. Clear this up, by actually using the allocated space for 6 GHz parameters _after_ the SSIDs, and set up the SSIDs initially so they are used more clearly. Just like in nl80211.c, set them only if there actually are SSIDs though. Finally, also copy the elements (ie/ie_len) so they're part of the same request, not pointing to the old request. Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240510113738.4190692ef4ee.I0cb19188be17a8abd029805e3373c0a7777c214c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: mac80211: handle tasklet frames before stoppingJohannes Berg
The code itself doesn't want to handle frames from the driver if it's already stopped, but if the tasklet was queued before and runs after the stop, then all bets are off. Flush queues before actually stopping, RX should be off at this point since all the interfaces are removed already, etc. Reported-by: syzbot+8830db5d3593b5546d2e@syzkaller.appspotmail.com Link: https://msgid.link/20240515135318.b05f11385c9a.I41c1b33a2e1814c3a7ef352cd7f2951b91785617@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: mac80211: apply mcast rate only if interface is upJohannes Berg
If the interface isn't enabled, don't apply multicast rate changes immediately. Reported-by: syzbot+de87c09cc7b964ea2e23@syzkaller.appspotmail.com Link: https://msgid.link/20240515133410.d6cffe5756cc.I47b624a317e62bdb4609ff7fa79403c0c444d32d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: pmsr: use correct nla_get_uX functionsLin Ma
The commit 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") defines four attributes NL80211_PMSR_FTM_REQ_ATTR_ {NUM_BURSTS_EXP}/{BURST_PERIOD}/{BURST_DURATION}/{FTMS_PER_BURST} in following ways. static const struct nla_policy nl80211_pmsr_ftm_req_attr_policy[NL80211_PMSR_FTM_REQ_ATTR_MAX + 1] = { ... [NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP] = NLA_POLICY_MAX(NLA_U8, 15), [NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD] = { .type = NLA_U16 }, [NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION] = NLA_POLICY_MAX(NLA_U8, 15), [NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST] = NLA_POLICY_MAX(NLA_U8, 31), ... }; That is, those attributes are expected to be NLA_U8 and NLA_U16 types. However, the consumers of these attributes in `pmsr_parse_ftm` blindly all use `nla_get_u32`, which is incorrect and causes functionality issues on little-endian platforms. Hence, fix them with the correct `nla_get_u8` and `nla_get_u16` functions. Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://msgid.link/20240521075059.47999-1-linma@zju.edu.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: Lock wiphy in cfg80211_get_stationRemi Pommarel
Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705 Hardware name: RPT (r1) (DT) Workqueue: bat_events batadv_v_elp_throughput_metric_update pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core] lr : sta_set_sinfo+0xcc/0xbd4 sp : ffff000007b43ad0 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000 Call trace: ath10k_sta_statistics+0x10/0x2dc [ath10k_core] sta_set_sinfo+0xcc/0xbd4 ieee80211_get_station+0x2c/0x44 cfg80211_get_station+0x80/0x154 batadv_v_elp_get_throughput+0x138/0x1fc batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x1ec/0x414 worker_thread+0x70/0x46c kthread+0xdc/0xe0 ret_from_fork+0x10/0x20 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814) This happens because STA has time to disconnect and reconnect before batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In this situation, ath10k_sta_state() can be in the middle of resetting arsta data when the work queue get chance to be scheduled and ends up accessing it. Locking wiphy prevents that. Fixes: 7406353d43c8 ("cfg80211: implement cfg80211_get_station cfg80211 API") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Reviewed-by: Nicolas Escande <nico.escande@gmail.com> Acked-by: Antonio Quartulli <a@unstable.cc> Link: https://msgid.link/983b24a6a176e0800c01aedcd74480d9b551cb13.1716046653.git.repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: fully move wiphy work to unbound workqueueJohannes Berg
Previously I had moved the wiphy work to the unbound system workqueue, but missed that when it restarts and during resume it was still using the normal system workqueue. Fix that. Fixes: 91d20ab9d9ca ("wifi: cfg80211: use system_unbound_wq for wiphy work") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240522124126.7ca959f2cbd3.I3e2a71ef445d167b84000ccf934ea245aef8d395@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: validate HE operation element parsingJohannes Berg
Validate that the HE operation element has the correct length before parsing it. Cc: stable@vger.kernel.org Fixes: 645f3d85129d ("wifi: cfg80211: handle UHB AP and STA power type") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240523120533.677025eb4a92.I44c091029ef113c294e8fe8b9bf871bf5dbeeb27@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup()Remi Pommarel
The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from softirq context. However using only spin_lock() to get sta->ps_lock in ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to take this same lock ending in deadlock. Below is an example of rcu stall that arises in such situation. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 2-....: (42413413 ticks this GP) idle=b154/1/0x4000000000000000 softirq=1763/1765 fqs=21206996 rcu: (t=42586894 jiffies g=2057 q=362405 ncpus=4) CPU: 2 PID: 719 Comm: wpa_supplicant Tainted: G W 6.4.0-02158-g1b062f552873 #742 Hardware name: RPT (r1) (DT) pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : queued_spin_lock_slowpath+0x58/0x2d0 lr : invoke_tx_handlers_early+0x5b4/0x5c0 sp : ffff00001ef64660 x29: ffff00001ef64660 x28: ffff000009bc1070 x27: ffff000009bc0ad8 x26: ffff000009bc0900 x25: ffff00001ef647a8 x24: 0000000000000000 x23: ffff000009bc0900 x22: ffff000009bc0900 x21: ffff00000ac0e000 x20: ffff00000a279e00 x19: ffff00001ef646e8 x18: 0000000000000000 x17: ffff800016468000 x16: ffff00001ef608c0 x15: 0010533c93f64f80 x14: 0010395c9faa3946 x13: 0000000000000000 x12: 00000000fa83b2da x11: 000000012edeceea x10: ffff0000010fbe00 x9 : 0000000000895440 x8 : 000000000010533c x7 : ffff00000ad8b740 x6 : ffff00000c350880 x5 : 0000000000000007 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00000ac0e0e8 Call trace: queued_spin_lock_slowpath+0x58/0x2d0 ieee80211_tx+0x80/0x12c ieee80211_tx_pending+0x110/0x278 tasklet_action_common.constprop.0+0x10c/0x144 tasklet_action+0x20/0x28 _stext+0x11c/0x284 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 do_softirq+0x74/0x7c __local_bh_enable_ip+0xa0/0xa4 _ieee80211_wake_txqs+0x3b0/0x4b8 __ieee80211_wake_queue+0x12c/0x168 ieee80211_add_pending_skbs+0xec/0x138 ieee80211_sta_ps_deliver_wakeup+0x2a4/0x480 ieee80211_mps_sta_status_update.part.0+0xd8/0x11c ieee80211_mps_sta_status_update+0x18/0x24 sta_apply_parameters+0x3bc/0x4c0 ieee80211_change_station+0x1b8/0x2dc nl80211_set_station+0x444/0x49c genl_family_rcv_msg_doit.isra.0+0xa4/0xfc genl_rcv_msg+0x1b0/0x244 netlink_rcv_skb+0x38/0x10c genl_rcv+0x34/0x48 netlink_unicast+0x254/0x2bc netlink_sendmsg+0x190/0x3b4 ____sys_sendmsg+0x1e8/0x218 ___sys_sendmsg+0x68/0x8c __sys_sendmsg+0x44/0x84 __arm64_sys_sendmsg+0x20/0x28 do_el0_svc+0x6c/0xe8 el0_svc+0x14/0x48 el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x14c/0x150 Using spin_lock_bh()/spin_unlock_bh() instead prevents softirq to raise on the same CPU that is holding the lock. Fixes: 1d147bfa6429 ("mac80211: fix AP powersave TX vs. wakeup race") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Link: https://msgid.link/8e36fe07d0fbc146f89196cd47a53c8a0afe84aa.1716910344.git.repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: mac80211: mesh: init nonpeer_pm to active by default in mesh sdataNicolas Escande
With a ath9k device I can see that: iw phy phy0 interface add mesh0 type mp ip link set mesh0 up iw dev mesh0 scan Will start a scan with the Power Management bit set in the Frame Control Field. This is because we set this bit depending on the nonpeer_pm variable of the mesh iface sdata and when there are no active links on the interface it remains to NL80211_MESH_POWER_UNKNOWN. As soon as links starts to be established, it wil switch to NL80211_MESH_POWER_ACTIVE as it is the value set by befault on the per sta nonpeer_pm field. As we want no power save by default, (as expressed with the per sta ini values), lets init it to the expected default value of NL80211_MESH_POWER_ACTIVE. Also please note that we cannot change the default value from userspace prior to establishing a link as using NL80211_CMD_SET_MESH_CONFIG will not work before NL80211_CMD_JOIN_MESH has been issued. So too late for our initial scan. Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Link: https://msgid.link/20240527141759.299411-1-nico.escande@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: mac80211: mesh: Fix leak of mesh_preq_queue objectsNicolas Escande
The hwmp code use objects of type mesh_preq_queue, added to a list in ieee80211_if_mesh, to keep track of mpath we need to resolve. If the mpath gets deleted, ex mesh interface is removed, the entries in that list will never get cleaned. Fix this by flushing all corresponding items of the preq_queue in mesh_path_flush_pending(). This should take care of KASAN reports like this: unreferenced object 0xffff00000668d800 (size 128): comm "kworker/u8:4", pid 67, jiffies 4295419552 (age 1836.444s) hex dump (first 32 bytes): 00 1f 05 09 00 00 ff ff 00 d5 68 06 00 00 ff ff ..........h..... 8e 97 ea eb 3e b8 01 00 00 00 00 00 00 00 00 00 ....>........... backtrace: [<000000007302a0b6>] __kmem_cache_alloc_node+0x1e0/0x35c [<00000000049bd418>] kmalloc_trace+0x34/0x80 [<0000000000d792bb>] mesh_queue_preq+0x44/0x2a8 [<00000000c99c3696>] mesh_nexthop_resolve+0x198/0x19c [<00000000926bf598>] ieee80211_xmit+0x1d0/0x1f4 [<00000000fc8c2284>] __ieee80211_subif_start_xmit+0x30c/0x764 [<000000005926ee38>] ieee80211_subif_start_xmit+0x9c/0x7a4 [<000000004c86e916>] dev_hard_start_xmit+0x174/0x440 [<0000000023495647>] __dev_queue_xmit+0xe24/0x111c [<00000000cfe9ca78>] batadv_send_skb_packet+0x180/0x1e4 [<000000007bacc5d5>] batadv_v_elp_periodic_work+0x2f4/0x508 [<00000000adc3cd94>] process_one_work+0x4b8/0xa1c [<00000000b36425d1>] worker_thread+0x9c/0x634 [<0000000005852dd5>] kthread+0x1bc/0x1c4 [<000000005fccd770>] ret_from_fork+0x10/0x20 unreferenced object 0xffff000009051f00 (size 128): comm "kworker/u8:4", pid 67, jiffies 4295419553 (age 1836.440s) hex dump (first 32 bytes): 90 d6 92 0d 00 00 ff ff 00 d8 68 06 00 00 ff ff ..........h..... 36 27 92 e4 02 e0 01 00 00 58 79 06 00 00 ff ff 6'.......Xy..... backtrace: [<000000007302a0b6>] __kmem_cache_alloc_node+0x1e0/0x35c [<00000000049bd418>] kmalloc_trace+0x34/0x80 [<0000000000d792bb>] mesh_queue_preq+0x44/0x2a8 [<00000000c99c3696>] mesh_nexthop_resolve+0x198/0x19c [<00000000926bf598>] ieee80211_xmit+0x1d0/0x1f4 [<00000000fc8c2284>] __ieee80211_subif_start_xmit+0x30c/0x764 [<000000005926ee38>] ieee80211_subif_start_xmit+0x9c/0x7a4 [<000000004c86e916>] dev_hard_start_xmit+0x174/0x440 [<0000000023495647>] __dev_queue_xmit+0xe24/0x111c [<00000000cfe9ca78>] batadv_send_skb_packet+0x180/0x1e4 [<000000007bacc5d5>] batadv_v_elp_periodic_work+0x2f4/0x508 [<00000000adc3cd94>] process_one_work+0x4b8/0xa1c [<00000000b36425d1>] worker_thread+0x9c/0x634 [<0000000005852dd5>] kthread+0x1bc/0x1c4 [<000000005fccd770>] ret_from_fork+0x10/0x20 Fixes: 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol") Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Link: https://msgid.link/20240528142605.1060566-1-nico.escande@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-26Linux 6.10-rc1Linus Torvalds
2024-05-26mm: percpu: Include smp.h in alloc_tag.hKent Overstreet
percpu.h depends on smp.h, but doesn't include it directly because of circular header dependency issues; percpu.h is needed in a bunch of low level headers. This fixes a randconfig build error on mips: include/linux/alloc_tag.h: In function '__alloc_tag_ref_set': include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Fixes: 24e44cc22aa3 ("mm: percpu: enable per-cpu allocation tagging") Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/ Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-05-26Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tool fix from Arnaldo Carvalho de Melo: "Revert a patch causing a regression. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels". * tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"
2024-05-26Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"Arnaldo Carvalho de Melo
This reverts commit 617824a7f0f73e4de325cf8add58e55b28c12493. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed at length in the threads in the Link tags below. The fix provided by Ian wasn't acceptable and work to fix this will take time we don't have at this point, so lets revert this and work on it on the next devel cycle. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Cc: Ethan Adams <j.ethan.adams@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tycho Andersen <tycho@tycho.pizza> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-05-25Merge tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: - two important netfs integration fixes - including for a data corruption and also fixes for multiple xfstests - reenable swap support over SMB3 * tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix missing set of remote_i_size cifs: Fix smb3_insert_range() to move the zero_point cifs: update internal version number smb3: reenable swapfiles over SMB3 mounts
2024-05-25Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "16 hotfixes, 11 of which are cc:stable. A few nilfs2 fixes, the remainder are for MM: a couple of selftests fixes, various singletons fixing various issues in various parts" * tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/ksm: fix possible UAF of stable_node mm/memory-failure: fix handling of dissolved but not taken off from buddy pages mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again nilfs2: fix potential hang in nilfs_detach_log_writer() nilfs2: fix unexpected freezing of nilfs_segctor_sync() nilfs2: fix use-after-free of timer for log writer thread selftests/mm: fix build warnings on ppc64 arm64: patching: fix handling of execmem addresses selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages selftests/mm: compaction_test: fix bogus test success on Aarch64 mailmap: update email address for Satya Priya mm/huge_memory: don't unpoison huge_zero_folio kasan, fortify: properly rename memintrinsics lib: add version into /proc/allocinfo output mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
2024-05-25Merge tag 'irq-urgent-2024-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: - Fix x86 IRQ vector leak caused by a CPU offlining race - Fix build failure in the riscv-imsic irqchip driver caused by an API-change semantic conflict - Fix use-after-free in irq_find_at_or_after() * tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
2024-05-25Merge tag 'x86-urgent-2024-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: - Fix regressions of the new x86 CPU VFM (vendor/family/model) enumeration/matching code - Fix crash kernel detection on buggy firmware with non-compliant ACPI MADT tables - Address Kconfig warning * tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL crypto: x86/aes-xts - switch to new Intel CPU model defines x86/topology: Handle bogus ACPI tables correctly x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y
2024-05-25Merge tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmiLinus Torvalds
Pull ipmi updates from Corey Minyard: "Mostly updates for deprecated interfaces, platform.remove and converting from a tasklet to a BH workqueue. Also use HAS_IOPORT for disabling inb()/outb()" * tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void ipmi: ipmi_ssif: Convert to platform remove callback returning void ipmi: ipmi_si_platform: Convert to platform remove callback returning void ipmi: ipmi_powernv: Convert to platform remove callback returning void ipmi: bt-bmc: Convert to platform remove callback returning void char: ipmi: handle HAS_IOPORT dependencies ipmi: Convert from tasklet to BH workqueue
2024-05-25Merge tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "A series from Xiubo that adds support for additional access checks based on MDS auth caps which were recently made available to clients. This is needed to prevent scenarios where the MDS quietly discards updates that a UID-restricted client previously (wrongfully) acked to the user. Other than that, just a documentation fixup" * tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client: doc: ceph: update userspace command to get CephFS metadata ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit ceph: check the cephx mds auth access for async dirop ceph: check the cephx mds auth access for open ceph: check the cephx mds auth access for setattr ceph: add ceph_mds_check_access() helper ceph: save cap_auths in MDS client when session is opened
2024-05-25Merge tag 'ntfs3_for_6.10' of ↵Linus Torvalds
https://github.com/Paragon-Software-Group/linux-ntfs3 Pull ntfs3 updates from Konstantin Komarov: "Fixes: - reusing of the file index (could cause the file to be trimmed) - infinite dir enumeration - taking DOS names into account during link counting - le32_to_cpu conversion, 32 bit overflow, NULL check - some code was refactored Changes: - removed max link count info display during driver init Remove: - atomic_open has been removed for lack of use" * tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3: fs/ntfs3: Break dir enumeration if directory contents error fs/ntfs3: Fix case when index is reused during tree transformation fs/ntfs3: Mark volume as dirty if xattr is broken fs/ntfs3: Always make file nonresident on fallocate call fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode fs/ntfs3: Use variable length array instead of fixed size fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow fs/ntfs3: Check 'folio' pointer for NULL fs/ntfs3: Missed le32_to_cpu conversion fs/ntfs3: Remove max link count info display during driver init fs/ntfs3: Taking DOS names into account during link counting fs/ntfs3: remove atomic_open fs/ntfs3: use kcalloc() instead of kzalloc()
2024-05-25Merge tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: "Two ksmbd server fixes, both for stable" * tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: ignore trailing slashes in share paths ksmbd: avoid to send duplicate oplock break notifications
2024-05-25Merge tag 'rtc-6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "There is one new driver and then most of the changes are the device tree bindings conversions to yaml. New driver: - Epson RX8111 Drivers: - Many Device Tree bindings conversions to dtschema - pcf8563: wakeup-source support" * tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: pcf8563: add wakeup-source support rtc: rx8111: handle VLOW flag rtc: rx8111: demote warnings to debug level rtc: rx6110: Constify struct regmap_config dt-bindings: rtc: convert trivial devices into dtschema dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema dt-bindings: rtc: pxa-rtc: convert to dtschema rtc: Add driver for Epson RX8111 dt-bindings: rtc: Add Epson RX8111 rtc: mcp795: drop unneeded MODULE_ALIAS rtc: nuvoton: Modify part number value rtc: test: Split rtc unit test into slow and normal speed test dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema dt-bindings: rtc: digicolor-rtc: move to trivial-rtc dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema dt-bindings: rtc: armada-380-rtc: convert to dtschema rtc: cros-ec: provide ID table for avoiding fallback match
2024-05-25Merge tag 'i3c/for-6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: "Runtime PM (power management) is improved and hot-join support has been added to the dw controller driver. Core: - Allow device driver to trigger controller runtime PM Drivers: - dw: hot-join support - svc: better IBI handling" * tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: dw: Add hot-join support. i3c: master: Enable runtime PM for master controller i3c: master: svc: fix invalidate IBI type and miss call client IBI handler i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers()
2024-05-25Merge tag 'jffs2-for-linus-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull jffs2 updates from Richard Weinberger: - Fix illegal memory access in jffs2_free_inode() - Kernel-doc fixes - print symbolic error names * tag 'jffs2-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: jffs2: Fix potential illegal address access in jffs2_free_inode jffs2: Simplify the allocation of slab caches jffs2: nodemgmt: fix kernel-doc comments jffs2: print symbolic error name instead of error code
2024-05-25Merge tag 'uml-for-linus-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull UML updates from Richard Weinberger: - Fixes for -Wmissing-prototypes warnings and further cleanup - Remove callback returning void from rtc and virtio drivers - Fix bash location * tag 'uml-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (26 commits) um: virtio_uml: Convert to platform remove callback returning void um: rtc: Convert to platform remove callback returning void um: Remove unused do_get_thread_area function um: Fix -Wmissing-prototypes warnings for __vdso_* um: Add an internal header shared among the user code um: Fix the declaration of kasan_map_memory um: Fix the -Wmissing-prototypes warning for get_thread_reg um: Fix the -Wmissing-prototypes warning for __switch_mm um: Fix -Wmissing-prototypes warnings for (rt_)sigreturn um: Stop tracking host PID in cpu_tasks um: process: remove unused 'n' variable um: vector: remove unused len variable/calculation um: vector: fix bpfflash parameter evaluation um: slirp: remove set but unused variable 'pid' um: signal: move pid variable where needed um: Makefile: use bash from the environment um: Add winch to winch_handlers before registering winch IRQ um: Fix -Wmissing-prototypes warnings for __warp_* and foo um: Fix -Wmissing-prototypes warnings for text_poke* um: Move declarations to proper headers ...
2024-05-24Merge tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Some fixes for the end of the merge window, mostly amdgpu and panthor, with one nouveau uAPI change that fixes a bad decision we made a few months back. nouveau: - fix bo metadata uAPI for vm bind panthor: - Fixes for panthor's heap logical block. - Reset on unrecoverable fault - Fix VM references. - Reset fix. xlnx: - xlnx compile and doc fixes. amdgpu: - Handle vbios table integrated info v2.3 amdkfd: - Handle duplicate BOs in reserve_bo_and_cond_vms - Handle memory limitations on small APUs dp/mst: - MST null deref fix. bridge: - Don't let next bridge create connector in adv7511 to make probe work" * tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel: drm/amdgpu/atomfirmware: add intergrated info v2.3 table drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2 drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms drm/bridge: adv7511: Attach next bridge without creating connector drm/buddy: Fix the warn on's during force merge drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocations drm/panthor: Call panthor_sched_post_reset() even if the reset failed drm/panthor: Reset the FW VM to NULL on unplug drm/panthor: Keep a ref to the VM at the panthor_kernel_bo level drm/panthor: Force an immediate reset on unrecoverable faults drm/panthor: Document drm_panthor_tiler_heap_destroy::handle validity constraints drm/panthor: Fix an off-by-one in the heap context retrieval logic drm/panthor: Relax the constraints on the tiler chunk size drm/panthor: Make sure the tiler initial/max chunks are consistent drm/panthor: Fix tiler OOM handling to allow incremental rendering drm: xlnx: zynqmp_dpsub: Fix compilation error drm: xlnx: zynqmp_dpsub: Fix few function comments
2024-05-24cifs: Fix missing set of remote_i_sizeDavid Howells
Occasionally, the generic/001 xfstest will fail indicating corruption in one of the copy chains when run on cifs against a server that supports FSCTL_DUPLICATE_EXTENTS_TO_FILE (eg. Samba with a share on btrfs). The problem is that the remote_i_size value isn't updated by cifs_setsize() when called by smb2_duplicate_extents(), but i_size *is*. This may cause cifs_remap_file_range() to then skip the bit after calling ->duplicate_extents() that sets sizes. Fix this by calling netfs_resize_file() in smb2_duplicate_extents() before calling cifs_setsize() to set i_size. This means we don't then need to call netfs_resize_file() upon return from ->duplicate_extents(), but we also fix the test to compare against the pre-dup inode size. [Note that this goes back before the addition of remote_i_size with the netfs_inode struct. It should probably have been setting cifsi->server_eof previously.] Fixes: cfc63fc8126a ("smb3: fix cached file size problems in duplicate extents (reflink)") Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Paulo Alcantara <pc@manguebit.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev Signed-off-by: Steve French <stfrench@microsoft.com>
2024-05-24cifs: Fix smb3_insert_range() to move the zero_pointDavid Howells
Fix smb3_insert_range() to move the zero_point over to the new EOF. Without this, generic/147 fails as reads of data beyond the old EOF point return zeroes. Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib") Signed-off-by: David Howells <dhowells@redhat.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev Signed-off-by: Steve French <stfrench@microsoft.com>
2024-05-24Merge tag 'mm-stable-2024-05-24-11-49' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more mm updates from Andrew Morton: "Jeff Xu's implementation of the mseal() syscall" * tag 'mm-stable-2024-05-24-11-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: selftest mm/mseal read-only elf memory segment mseal: add documentation selftest mm/mseal memory sealing mseal: add mseal syscall mseal: wire up mseal syscall
2024-05-24mm/ksm: fix possible UAF of stable_nodeChengming Zhou
The commit 2c653d0ee2ae ("ksm: introduce ksm_max_page_sharing per page deduplication limit") introduced a possible failure case in the stable_tree_insert(), where we may free the new allocated stable_node_dup if we fail to prepare the missing chain node. Then that kfolio return and unlock with a freed stable_node set... And any MM activities can come in to access kfolio->mapping, so UAF. Fix it by moving folio_set_stable_node() to the end after stable_node is inserted successfully. Link: https://lkml.kernel.org/r/20240513-b4-ksm-stable-node-uaf-v1-1-f687de76f452@linux.dev Fixes: 2c653d0ee2ae ("ksm: introduce ksm_max_page_sharing per page deduplication limit") Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Stefan Roesch <shr@devkernel.io> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-24mm/memory-failure: fix handling of dissolved but not taken off from buddy pagesMiaohe Lin
When I did memory failure tests recently, below panic occurs: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00 flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff) raw: 06fffe0000000000 dead000000000100 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000009 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(!PageBuddy(page)) ------------[ cut here ]------------ kernel BUG at include/linux/page-flags.h:1009! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:__del_page_from_free_list+0x151/0x180 RSP: 0018:ffffa49c90437998 EFLAGS: 00000046 RAX: 0000000000000035 RBX: 0000000000000009 RCX: ffff8dd8dfd1c9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff8dd8dfd1c9c0 RBP: ffffd901233b8000 R08: ffffffffab5511f8 R09: 0000000000008c69 R10: 0000000000003c15 R11: ffffffffab5511f8 R12: ffff8dd8fffc0c80 R13: 0000000000000001 R14: ffff8dd8fffc0c80 R15: 0000000000000009 FS: 00007ff916304740(0000) GS:ffff8dd8dfd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055eae50124c8 CR3: 00000008479e0000 CR4: 00000000000006f0 Call Trace: <TASK> __rmqueue_pcplist+0x23b/0x520 get_page_from_freelist+0x26b/0xe40 __alloc_pages_noprof+0x113/0x1120 __folio_alloc_noprof+0x11/0xb0 alloc_buddy_hugetlb_folio.isra.0+0x5a/0x130 __alloc_fresh_hugetlb_folio+0xe7/0x140 alloc_pool_huge_folio+0x68/0x100 set_max_huge_pages+0x13d/0x340 hugetlb_sysctl_handler_common+0xe8/0x110 proc_sys_call_handler+0x194/0x280 vfs_write+0x387/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xc2/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff916114887 RSP: 002b:00007ffec8a2fd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000055eae500e350 RCX: 00007ff916114887 RDX: 0000000000000004 RSI: 000055eae500e390 RDI: 0000000000000003 RBP: 000055eae50104c0 R08: 0000000000000000 R09: 000055eae50104c0 R10: 0000000000000077 R11: 0000000000000246 R12: 0000000000000004 R13: 0000000000000004 R14: 00007ff916216b80 R15: 00007ff916216a00 </TASK> Modules linked in: mce_inject hwpoison_inject ---[ end trace 0000000000000000 ]--- And before the panic, there had an warning about bad page state: BUG: Bad page state in process page-types pfn:8cee00 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00 flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff) page_type: 0xffffff7f(buddy) raw: 06fffe0000000000 ffffd901241c0008 ffffd901240f8008 0000000000000000 raw: 0000000000000000 0000000000000009 00000000ffffff7f 0000000000000000 page dumped because: nonzero mapcount Modules linked in: mce_inject hwpoison_inject CPU: 8 PID: 154211 Comm: page-types Not tainted 6.9.0-rc4-00499-g5544ec3178e2-dirty #22 Call Trace: <TASK> dump_stack_lvl+0x83/0xa0 bad_page+0x63/0xf0 free_unref_page+0x36e/0x5c0 unpoison_memory+0x50b/0x630 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110 debugfs_attr_write+0x42/0x60 full_proxy_write+0x5b/0x80 vfs_write+0xcd/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xc2/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f189a514887 RSP: 002b:00007ffdcd899718 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f189a514887 RDX: 0000000000000009 RSI: 00007ffdcd899730 RDI: 0000000000000003 RBP: 00007ffdcd8997a0 R08: 0000000000000000 R09: 00007ffdcd8994b2 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcda199a8 R13: 0000000000404af1 R14: 000000000040ad78 R15: 00007f189a7a5040 </TASK> The root cause should be the below race: memory_failure try_memory_failure_hugetlb me_huge_page __page_handle_poison dissolve_free_hugetlb_folio drain_all_pages -- Buddy page can be isolated e.g. for compaction. take_page_off_buddy -- Failed as page is not in the buddy list. -- Page can be putback into buddy after compaction. page_ref_inc -- Leads to buddy page with refcnt = 1. Then unpoison_memory() can unpoison the page and send the buddy page back into buddy list again leading to the above bad page state warning. And bad_page() will call page_mapcount_reset() to remove PageBuddy from buddy page leading to later VM_BUG_ON_PAGE(!PageBuddy(page)) when trying to allocate this page. Fix this issue by only treating __page_handle_poison() as successful when it returns 1. Link: https://lkml.kernel.org/r/20240523071217.1696196-1-linmiaohe@huawei.com Fixes: ceaf8fbea79a ("mm, hwpoison: skip raw hwpoison page in freeing 1GB hugepage") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-24mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock againYuanyuan Zhong
After switching smaps_rollup to use VMA iterator, searching for next entry is part of the condition expression of the do-while loop. So the current VMA needs to be addressed before the continue statement. Otherwise, with some VMAs skipped, userspace observed memory consumption from /proc/pid/smaps_rollup will be smaller than the sum of the corresponding fields from /proc/pid/smaps. Link: https://lkml.kernel.org/r/20240523183531.2535436-1-yzhong@purestorage.com Fixes: c4c84f06285e ("fs/proc/task_mmu: stop using linked list and highest_vm_end") Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com> Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-24nilfs2: fix potential hang in nilfs_detach_log_writer()Ryusuke Konishi
Syzbot has reported a potential hang in nilfs_detach_log_writer() called during nilfs2 unmount. Analysis revealed that this is because nilfs_segctor_sync(), which synchronizes with the log writer thread, can be called after nilfs_segctor_destroy() terminates that thread, as shown in the call trace below: nilfs_detach_log_writer nilfs_segctor_destroy nilfs_segctor_kill_thread --> Shut down log writer thread flush_work nilfs_iput_work_func nilfs_dispose_list iput nilfs_evict_inode nilfs_transaction_commit nilfs_construct_segment (if inode needs sync) nilfs_segctor_sync --> Attempt to synchronize with log writer thread *** DEADLOCK *** Fix this issue by changing nilfs_segctor_sync() so that the log writer thread returns normally without synchronizing after it terminates, and by forcing tasks that are already waiting to complete once after the thread terminates. The skipped inode metadata flushout will then be processed together in the subsequent cleanup work in nilfs_segctor_destroy(). Link: https://lkml.kernel.org/r/20240520132621.4054-4-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+e3973c409251e136fdd0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=e3973c409251e136fdd0 Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Cc: "Bai, Shuangpeng" <sjb7183@psu.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-24nilfs2: fix unexpected freezing of nilfs_segctor_sync()Ryusuke Konishi
A potential and reproducible race issue has been identified where nilfs_segctor_sync() would block even after the log writer thread writes a checkpoint, unless there is an interrupt or other trigger to resume log writing. This turned out to be because, depending on the execution timing of the log writer thread running in parallel, the log writer thread may skip responding to nilfs_segctor_sync(), which causes a call to schedule() waiting for completion within nilfs_segctor_sync() to lose the opportunity to wake up. The reason why waking up the task waiting in nilfs_segctor_sync() may be skipped is that updating the request generation issued using a shared sequence counter and adding an wait queue entry to the request wait queue to the log writer, are not done atomically. There is a possibility that log writing and request completion notification by nilfs_segctor_wakeup() may occur between the two operations, and in that case, the wait queue entry is not yet visible to nilfs_segctor_wakeup() and the wake-up of nilfs_segctor_sync() will be carried over until the next request occurs. Fix this issue by performing these two operations simultaneously within the lock section of sc_state_lock. Also, following the memory barrier guidelines for event waiting loops, move the call to set_current_state() in the same location into the event waiting loop to ensure that a memory barrier is inserted just before the event condition determination. Link: https://lkml.kernel.org/r/20240520132621.4054-3-konishi.ryusuke@gmail.com Fixes: 9ff05123e3bf ("nilfs2: segment constructor") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Cc: "Bai, Shuangpeng" <sjb7183@psu.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-24nilfs2: fix use-after-free of timer for log writer threadRyusuke Konishi
Patch series "nilfs2: fix log writer related issues". This bug fix series covers three nilfs2 log writer-related issues, including a timer use-after-free issue and potential deadlock issue on unmount, and a potential freeze issue in event synchronization found during their analysis. Details are described in each commit log. This patch (of 3): A use-after-free issue has been reported regarding the timer sc_timer on the nilfs_sc_info structure. The problem is that even though it is used to wake up a sleeping log writer thread, sc_timer is not shut down until the nilfs_sc_info structure is about to be freed, and is used regardless of the thread's lifetime. Fix this issue by limiting the use of sc_timer only while the log writer thread is alive. Link: https://lkml.kernel.org/r/20240520132621.4054-1-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/20240520132621.4054-2-konishi.ryusuke@gmail.com Fixes: fdce895ea5dd ("nilfs2: change sc_timer from a pointer to an embedded one in struct nilfs_sc_info") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: "Bai, Shuangpeng" <sjb7183@psu.edu> Closes: https://groups.google.com/g/syzkaller/c/MK_LYqtt8ko/m/8rgdWeseAwAJ Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-24selftests/mm: fix build warnings on ppc64Michael Ellerman
Fix warnings like: In file included from uffd-unit-tests.c:8: uffd-unit-tests.c: In function `uffd_poison_handle_fault': uffd-common.h:45:33: warning: format `%llu' expects argument of type `long long unsigned int', but argument 3 has type `__u64' {aka `long unsigned int'} [-Wformat=] By switching to unsigned long long for u64 for ppc64 builds. Link: https://lkml.kernel.org/r/20240521030219.57439-1-mpe@ellerman.id.au Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-24arm64: patching: fix handling of execmem addressesWill Deacon
Klara Modin reported warnings for a kernel configured with BPF_JIT but without MODULES: [ 44.131296] Trying to vfree() bad address (000000004a17c299) [ 44.138024] WARNING: CPU: 1 PID: 193 at mm/vmalloc.c:3189 remove_vm_area (mm/vmalloc.c:3189 (discriminator 1)) [ 44.146675] CPU: 1 PID: 193 Comm: kworker/1:2 Tainted: G D W 6.9.0-01786-g2c9e5d4a0082 #25 [ 44.158229] Hardware name: Raspberry Pi 3 Model B (DT) [ 44.164433] Workqueue: events bpf_prog_free_deferred [ 44.170492] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 44.178601] pc : remove_vm_area (mm/vmalloc.c:3189 (discriminator 1)) [ 44.183705] lr : remove_vm_area (mm/vmalloc.c:3189 (discriminator 1)) [ 44.188772] sp : ffff800082a13c70 [ 44.193112] x29: ffff800082a13c70 x28: 0000000000000000 x27: 0000000000000000 [ 44.201384] x26: 0000000000000000 x25: ffff00003a44efa0 x24: 00000000d4202000 [ 44.209658] x23: ffff800081223dd0 x22: ffff00003a198a40 x21: ffff8000814dd880 [ 44.217924] x20: 00000000d4202000 x19: ffff8000814dd880 x18: 0000000000000006 [ 44.226206] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000002 [ 44.234460] x14: ffff8000811a6370 x13: 0000000020000000 x12: 0000000000000000 [ 44.242710] x11: ffff8000811a6370 x10: 0000000000000144 x9 : ffff8000811fe370 [ 44.250959] x8 : 0000000000017fe8 x7 : 00000000fffff000 x6 : ffff8000811fe370 [ 44.259206] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 44.267457] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000002203240 [ 44.275703] Call trace: [ 44.279158] remove_vm_area (mm/vmalloc.c:3189 (discriminator 1)) [ 44.283858] vfree (mm/vmalloc.c:3322) [ 44.287835] execmem_free (mm/execmem.c:70) [ 44.292347] bpf_jit_free_exec+0x10/0x1c [ 44.297283] bpf_prog_pack_free (kernel/bpf/core.c:1006) [ 44.302457] bpf_jit_binary_pack_free (kernel/bpf/core.c:1195) [ 44.307951] bpf_jit_free (include/linux/filter.h:1083 arch/arm64/net/bpf_jit_comp.c:2474) [ 44.312342] bpf_prog_free_deferred (kernel/bpf/core.c:2785) [ 44.317785] process_one_work (kernel/workqueue.c:3273) [ 44.322684] worker_thread (kernel/workqueue.c:3342 (discriminator 2) kernel/workqueue.c:3429 (discriminator 2)) [ 44.327292] kthread (kernel/kthread.c:388) [ 44.331342] ret_from_fork (arch/arm64/kernel/entry.S:861) The problem is because bpf_arch_text_copy() silently fails to write to the read-only area as a result of patch_map() faulting and the resulting -EFAULT being chucked away. Update patch_map() to use CONFIG_EXECMEM instead of CONFIG_STRICT_MODULE_RWX to check for vmalloc addresses. Link: https://lkml.kernel.org/r/20240521213813.703309-1-rppt@kernel.org Fixes: 2c9e5d4a0082 ("bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of") Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Reported-by: Klara Modin <klarasmodin@gmail.com> Closes: https://lore.kernel.org/all/7983fbbf-0127-457c-9394-8d6e4299c685@gmail.com Tested-by: Klara Modin <klarasmodin@gmail.com> Cc: Björn Töpel <bjorn@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-24selftests/mm: compaction_test: fix bogus test success and reduce probability ↵Dev Jain
of OOM-killer invocation Reset nr_hugepages to zero before the start of the test. If a non-zero number of hugepages is already set before the start of the test, the following problems arise: - The probability of the test getting OOM-killed increases. Proof: The test wants to run on 80% of available memory to prevent OOM-killing (see original code comments). Let the value of mem_free at the start of the test, when nr_hugepages = 0, be x. In the other case, when nr_hugepages > 0, let the memory consumed by hugepages be y. In the former case, the test operates on 0.8 * x of memory. In the latter, the test operates on 0.8 * (x - y) of memory, with y already filled, hence, memory consumed is y + 0.8 * (x - y) = 0.8 * x + 0.2 * y > 0.8 * x. Q.E.D - The probability of a bogus test success increases. Proof: Let the memory consumed by hugepages be greater than 25% of x, with x and y defined as above. The definition of compaction_index is c_index = (x - y)/z where z is the memory consumed by hugepages after trying to increase them again. In check_compaction(), we set the number of hugepages to zero, and then increase them back; the probability that they will be set back to consume at least y amount of memory again is very high (since there is not much delay between the two attempts of changing nr_hugepages). Hence, z >= y > (x/4) (by the 25% assumption). Therefore, c_index = (x - y)/z <= (x - y)/y = x/y - 1 < 4 - 1 = 3 hence, c_index can always be forced to be less than 3, thereby the test succeeding always. Q.E.D Link: https://lkml.kernel.org/r/20240521074358.675031-4-dev.jain@arm.com Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory") Signed-off-by: Dev Jain <dev.jain@arm.com> Cc: <stable@vger.kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Sri Jayaramappa <sjayaram@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-05-24selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepagesDev Jain
Currently, the test tries to set nr_hugepages to zero, but that is not actually done because the file offset is not reset after read(). Fix that using lseek(). Link: https://lkml.kernel.org/r/20240521074358.675031-3-dev.jain@arm.com Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory") Signed-off-by: Dev Jain <dev.jain@arm.com> Cc: <stable@vger.kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Sri Jayaramappa <sjayaram@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-07 02:19:27 +0000