| Age | Commit message (Collapse) | Author |
|---|
|
In the following patches the function is used to implement in-place bitmaps
traversing without storing intermediate result in temporary bitmaps.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
net: core: use a dedicated kmem_cache for skb head allocs
Our profile data show that using kmalloc(non_const_size)/kfree(ptr)
has a certain cost, because kfree(ptr) has to pull a 'struct page'
in cpu caches.
Using a dedicated kmem_cache for TCP skb->head allocations makes
a difference, both in cpu cycles and memory savings.
This kmem_cache could also be used for GRO skb allocations,
this is left as a future exercise.
====================
Link: https://lore.kernel.org/r/20230206173103.2617121-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent removal of ksize() in alloc_skb() increased
performance because we no longer read
the associated struct page.
We have an equivalent cost at kfree_skb() time.
kfree(skb->head) has to access a struct page,
often cold in cpu caches to get the owning
struct kmem_cache.
Considering that many allocations are small (at least for TCP ones)
we can have our own kmem_cache to avoid the cache line miss.
This also saves memory because these small heads
are no longer padded to 1024 bytes.
CONFIG_SLUB=y
$ grep skbuff_small_head /proc/slabinfo
skbuff_small_head 2907 2907 640 51 8 : tunables 0 0 0 : slabdata 57 57 0
CONFIG_SLAB=y
$ grep skbuff_small_head /proc/slabinfo
skbuff_small_head 607 624 640 6 1 : tunables 54 27 8 : slabdata 104 104 5
Notes:
- After Kees Cook patches and this one, we might
be able to revert commit
dbae2b062824 ("net: skb: introduce and use a single page frag cache")
because GRO_MAX_HEAD is also small.
- This patch is a NOP for CONFIG_SLOB=y builds.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All kmalloc_reserve() callers have to make the same computation,
we can factorize them, to prepare following patch in the series.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a cleanup patch, to prepare following change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have many places using this expression:
SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
Use of SKB_HEAD_ALIGN() will allow to clean them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-02-06
this is a pull request of 47 patches for net-next/master.
The first two patch is by Oliver Hartkopp. One adds missing error
checking to the CAN_GW protocol, the other adds a missing CAN address
family check to the CAN ISO TP protocol.
Thomas Kopp contributes a performance optimization to the mcp251xfd
driver.
The next 11 patches are by Geert Uytterhoeven and add support for
R-Car V4H systems to the rcar_canfd driver.
Stephane Grosjean and Lukas Magel contribute 8 patches to the peak_usb
driver, which add support for configurable CAN channel ID.
The last 17 patches are by me and target the CAN bit timing
configuration. The bit timing is cleaned up, error messages are
improved and forwarded to user space via NL_SET_ERR_MSG_FMT() instead
of netdev_err(), and the SJW handling is updated, including the
definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
* tag 'linux-can-next-for-6.3-20230206' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (47 commits)
can: bittiming: can_validate_bitrate(): report error via netlink
can: bittiming: can_calc_bittiming(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
can: bittiming: can_calc_bittiming(): clean up SJW handling
can: bittiming: can_sjw_set_default(): use Phase Seg2 / 2 as default for SJW
can: bittiming: can_sjw_check(): check that SJW is not longer than either Phase Buffer Segment
can: bittiming: can_sjw_check(): report error via netlink and harmonize error value
can: bittiming: can_fixup_bittiming(): report error via netlink and harmonize error value
can: bittiming: factor out can_sjw_set_default() and can_sjw_check()
can: bittiming: can_changelink() pass extack down callstack
can: netlink: can_changelink(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
can: netlink: can_validate(): validate sample point for CAN and CAN-FD
can: dev: register_candev(): bail out if both fixed bit rates and bit timing constants are provided
can: dev: register_candev(): ensure that bittiming const are valid
can: bittiming: can_get_bittiming(): use direct return and remove unneeded else
can: bittiming: can_fixup_bittiming(): set effective tq
can: bittiming: can_fixup_bittiming(): use CAN_SYNC_SEG instead of 1
can: bittiming(): replace open coded variants of can_bit_time()
can: peak_usb: Reorder include directives alphabetically
can: peak_usb: align CAN channel ID format in log with sysfs attribute
can: peak_usb: export PCAN CAN channel ID as sysfs device attribute
...
====================
Link: https://lore.kernel.org/r/20230206131620.2758724-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If ops->get_mm() returns a non-zero error code, we goto out_complete,
but there, we return 0. Fix that to propagate the "ret" variable to the
caller. If ops->get_mm() succeeds, it will always return 0.
Fixes: 2b30f8291a30 ("net: ethtool: add support for MAC Merge layer")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230206094932.446379-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use actual CPU number instead of hardcoded value to decide the size
of 'cpu_used_mask' in 'struct sw_flow'. Below is the reason.
'struct cpumask cpu_used_mask' is embedded in struct sw_flow.
Its size is hardcoded to CONFIG_NR_CPUS bits, which can be
8192 by default, it costs memory and slows down ovs_flow_alloc.
To address this:
Redefine cpu_used_mask to pointer.
Append cpumask_size() bytes after 'stat' to hold cpumask.
Initialization cpu_used_mask right after stats_last_writer.
APIs like cpumask_next and cpumask_set_cpu never access bits
beyond cpu count, cpumask_size() bytes of memory is enough.
Signed-off-by: Eddy Tao <taoyuan_eddy@hotmail.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/OS3P286MB229570CCED618B20355D227AF5D59@OS3P286MB2295.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The forward declaration was introduced with a prototype that does
not match the function definition:
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd, enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch]
2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int, unsigned int)'
391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Ideally there should not be any forward declarations here, which
would make it easier to show that there is no unbounded recursion.
I tried fixing this but could not figure out how to avoid the
recursive call.
As a hotfix, address only the broken prototype to fix the build
problem instead.
Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230203121553.2871598-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are no external users of the vsc7514_*_regmap[] symbols or
vsc7514_vcap_* functions. They were exported in commit 32ecd22ba60b ("net:
mscc: ocelot: split register definitions to a separate file") with the
intention of being used, but the actual structure used in commit
2efaca411c96 ("net: mscc: ocelot: expose vsc7514_regmap definition") ended
up being all that was needed.
Bury these unnecessary symbols.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230204182056.25502-1-colin.foster@in-advantage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ajit Khaparde says:
====================
bnxt: Add Auxiliary driver support
Add auxiliary device driver for Broadcom devices.
The bnxt_en driver will register and initialize an aux device
if RDMA is enabled in the underlying device.
The bnxt_re driver will then probe and initialize the
RoCE interfaces with the infiniband stack.
We got rid of the bnxt_en_ops which the bnxt_re driver used to
communicate with bnxt_en.
Similarly We have tried to clean up most of the bnxt_ulp_ops.
In most of the cases we used the functions and entry points provided
by the auxiliary bus driver framework.
And now these are the minimal functions needed to support the functionality.
We will try to work on getting rid of the remaining if we find any
other viable option in future.
* 'aux-bus-v11' of https://github.com/ajitkhaparde1/linux:
bnxt_en: Remove runtime interrupt vector allocation
RDMA/bnxt_re: Remove the sriov config callback
bnxt_en: Remove struct bnxt access from RoCE driver
bnxt_en: Use auxiliary bus calls over proprietary calls
bnxt_en: Use direct API instead of indirection
bnxt_en: Remove usage of ulp_id
RDMA/bnxt_re: Use auxiliary driver interface
bnxt_en: Add auxiliary driver support
====================
Link: https://lore.kernel.org/r/20230202033809.3989-1-ajit.khaparde@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Marc Kleine-Budde <mkl@pengutronix.de> says:
several people noticed that on modern CAN controllers with wide bit
timing registers the default SJW of 1 can result in unstable or no
synchronization to the CAN network. See Patch 14/17 for details.
During review of v1 Vincent pointed out that the original code and the
series doesn't always check user provided bit timing parameters,
sometimes silently limits them and the return error values are not
consistent.
This series first cleans up some code in bittiming.c, replacing
open-coded variants by macros or functions (Patches 1, 2).
Patch 3 adds the missing assignment of the effective TQ if the
interface is configured with low level timing parameters.
Patch 4 is another code cleanup.
Patches 5, 6 check the bit timing parameter during interface
registration.
Patch 7 adds a validation of the sample point.
The patches 8-13 convert the error messages from netdev_err() to
NL_SET_ERR_MSG_FMT, factor out the SJW handling from
can_fixup_bittiming(), add checking and error messages for the
individual limits and harmonize the error return values.
Patch 14 changes the default SJW value from 1 to min(Phase Seg1, Phase
Seg2 / 2).
Patch 15 switches can_calc_bittiming() to use the new SJW handling.
Patch 16 converts can_calc_bittiming() to NL_SET_ERR_MSG_FMT().
And patch 16 adds a NL_SET_ERR_MSG_FMT() error message to
can_validate_bitrate().
v1: https://lore.kernel.org/all/20220907103845.3929288-1-mkl@pengutronix.de
Link: https://lore.kernel.org/all/20230202110854.2318594-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Report an error to user space via netlink if the requested bit rate is
not supported by the device.
Link: https://lore.kernel.org/all/20230202110854.2318594-18-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
NL_SET_ERR_MSG_FMT()
Replace the netdev_err() by NL_SET_ERR_MSG_FMT() to better inform the
user about the problem. While there, use %u to print unsigned values
and improve error message a bit.
In case of an error, return -EINVAL instead of -EDOM, this corresponds
better to the actual meaning of the error value.
Link: https://lore.kernel.org/all/20230202110854.2318594-17-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In the current code, if the user configures a bitrate, a default SJW
value of 1 is used. If the user configures both a bitrate and a SJW
value, can_calc_bittiming() silently limits the SJW value to SJW max
and TSEG2.
We came to the conclusion that if the user provided an invalid SJW
value, it's best to bail out and inform the user [1].
[1] https://lore.kernel.org/all/CAMZ6RqKqhmTgUZiwe5uqUjBDnhhC2iOjZ791+Y845btJYwVDKg@mail.gmail.com
Further the ISO 11898-1:2015 standard mandates that "SJW shall be less
than or equal to the minimum of these two items: Phase_Seg1 and
Phase_Seg2." [2] The current code is missing that check.
[2] https://lore.kernel.org/all/BL3PR11MB64844E3FC13C55433CDD0B3DFB449@BL3PR11MB6484.namprd11.prod.outlook.com
The previous patches introduced
1) can_sjw_set_default() - sets a default value for SJW if unset
2) can_sjw_check() - implements a SJW check against SJW max, Phase
Seg1 and Phase Seg2. In the error case this function reports the error
to user space via netlink.
Replace both the open-coded SJW default setting and the open-coded and
insufficient checks of SJW with the helper functions
can_sjw_set_default() and can_sjw_check().
Link: https://lore.kernel.org/all/20230202110854.2318594-16-mkl@pengutronix.de
Link: https://lore.kernel.org/all/CAMZ6RqKqhmTgUZiwe5uqUjBDnhhC2iOjZ791+Y845btJYwVDKg@mail.gmail.com
Link: https://lore.kernel.org/all/BL3PR11MB64844E3FC13C55433CDD0B3DFB449@BL3PR11MB6484.namprd11.prod.outlook.com
Suggested-by: Thomas Kopp <Thomas.Kopp@microchip.com>
Suggested-by: Vincent Mailhol <vincent.mailhol@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
"The (Re-)Synchronization Jump Width (SJW) defines how far a
resynchronization may move the Sample Point inside the limits defined
by the Phase Buffer Segments to compensate for edge phase errors." [1]
In other words, this means that the SJW parameter controls the
tolerance of the CAN controller to frequency errors compared to other
CAN controllers.
If the user space does not provide an SJW parameter, the kernel
chooses a default value of 1. This has proven to be a good default
value for classic CAN controllers, but no longer for modern CAN-FD
controllers.
In the past there were CAN controllers like the sja1000 with a rather
limited range of bit timing parameters. For the standard bit rates
this results in the following bit timing parameters:
| Bit timing parameters for sja1000 with 8.000000 MHz ref clock
| _----+--------------=> tseg1: 1 … 16
| / / _---------=> tseg2: 1 … 8
| | | / _-----=> sjw: 1 … 4
| | | | / _-=> brp: 1 … 64 (inc: 1)
| | | | | /
| nominal | | | | | real Bitrt nom real SampP
| Bitrate TQ[ns] PrS PhS1 PhS2 SJW BRP Bitrate Error SampP SampP Error BTR0 BTR1
| 1000000 125 2 3 2 1 1 1000000 0.0% 75.0% 75.0% 0.0% 0x00 0x14
| 800000 125 3 4 2 1 1 800000 0.0% 80.0% 80.0% 0.0% 0x00 0x16
| 666666 125 4 4 3 1 1 666666 0.0% 80.0% 75.0% 6.2% 0x00 0x27
| 500000 125 6 7 2 1 1 500000 0.0% 87.5% 87.5% 0.0% 0x00 0x1c
| 250000 250 6 7 2 1 2 250000 0.0% 87.5% 87.5% 0.0% 0x01 0x1c
| 125000 500 6 7 2 1 4 125000 0.0% 87.5% 87.5% 0.0% 0x03 0x1c
| 100000 625 6 7 2 1 5 100000 0.0% 87.5% 87.5% 0.0% 0x04 0x1c
| 83333 750 6 7 2 1 6 83333 0.0% 87.5% 87.5% 0.0% 0x05 0x1c
| 50000 1250 6 7 2 1 10 50000 0.0% 87.5% 87.5% 0.0% 0x09 0x1c
| 33333 1875 6 7 2 1 15 33333 0.0% 87.5% 87.5% 0.0% 0x0e 0x1c
| 20000 3125 6 7 2 1 25 20000 0.0% 87.5% 87.5% 0.0% 0x18 0x1c
| 10000 6250 6 7 2 1 50 10000 0.0% 87.5% 87.5% 0.0% 0x31 0x1c
The attentive reader will notice that the SJW is 1 in most cases,
while the Seg2 phase is 2. Both values are given in TQ units, which in
turn is a duration in nanoseconds.
For example the 500 kbit/s configuration:
| nominal real Bitrt nom real SampP
| Bitrate TQ[ns] PrS PhS1 PhS2 SJW BRP Bitrate Error SampP SampP Error BTR0 BTR1
| 500000 125 6 7 2 1 1 500000 0.0% 87.5% 87.5% 0.0% 0x00 0x1c
the TQ is 125ns, the Phase Seg2 is "2" (== 250ns), the SJW is "1" (==
125 ns).
Looking at a more modern CAN controller like a mcp2518fd, it has wider
bit timing registers.
| Bit timing parameters for mcp251xfd with 40.000000 MHz ref clock
| _----+--------------=> tseg1: 2 … 256
| / / _---------=> tseg2: 1 … 128
| | | / _-----=> sjw: 1 … 128
| | | | / _-=> brp: 1 … 256 (inc: 1)
| | | | | /
| nominal | | | | | real Bitrt nom real SampP
| Bitrate TQ[ns] PrS PhS1 PhS2 SJW BRP Bitrate Error SampP SampP Error NBTCFG
| 500000 25 34 35 10 1 1 500000 0.0% 87.5% 87.5% 0.0% 0x00440900
The TQ is 25ns, the Phase Seg 2 is "10" (== 250ns), the SJW is "1" (==
25ns).
Since the kernel chooses a default SJW of 1 regardless of the TQ, this
leads to a much smaller SJW and thus much smaller tolerances to
frequency errors.
To maintain the same oscillator tolerances on controllers with wide
bit timing registers, select a default SJW value of Phase Seg2 / 2
unless Phase Seg 1 is less. This results in the following bit timing
parameters:
| Bit timing parameters for mcp251xfd with 40.000000 MHz ref clock
| _----+--------------=> tseg1: 2 … 256
| / / _---------=> tseg2: 1 … 128
| | | / _-----=> sjw: 1 … 128
| | | | / _-=> brp: 1 … 256 (inc: 1)
| | | | | /
| nominal | | | | | real Bitrt nom real SampP
| Bitrate TQ[ns] PrS PhS1 PhS2 SJW BRP Bitrate Error SampP SampP Error NBTCFG
| 500000 25 34 35 10 5 1 500000 0.0% 87.5% 87.5% 0.0% 0x00440904
The TQ is 25ns, the Phase Seg 2 is "10" (== 250ns), the SJW is "5" (==
125ns). Which is the same as on the sja1000 controller.
[1] http://web.archive.org/http://www.oertel-halle.de/files/cia99paper.pdf
Link: https://lore.kernel.org/all/20230202110854.2318594-15-mkl@pengutronix.de
Cc: Mark Bath <mark@baggywrinkle.co.uk>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Phase Buffer Segment
According to "The Configuration of the CAN Bit Timing" [1] the SJW
"may not be longer than either Phase Buffer Segment".
Check SJW against length of both Phase buffers. In case the SJW is
greater, report an error via netlink to user space and bail out.
[1] http://web.archive.org/http://www.oertel-halle.de/files/cia99paper.pdf
Link: https://lore.kernel.org/all/20230202110854.2318594-14-mkl@pengutronix.de
Suggested-by: Vincent Mailhol <vincent.mailhol@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
error value
If the user space has supplied an invalid SJW value (greater than the
maximum SJW value), report -EINVAL instead of -ERANGE, this better
matches the actual meaning of the error value.
Additionally report an error message via netlink to the user space.
Link: https://lore.kernel.org/all/20230202110854.2318594-13-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
harmonize error value
Check each bit timing parameter first individually against their
limits and report a meaningful error message via netlink to the user
space.
In case of an error, return -EINVAL instead of -ERANGE, this
corresponds better to the actual meaning of the error value.
Link: https://lore.kernel.org/all/20230202110854.2318594-12-mkl@pengutronix.de
Suggested-by: Vincent Mailhol <vincent.mailhol@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Factor out the functionality of assigning a SJW default value into
can_sjw_set_default() and the checking the SJW limits into
can_sjw_check().
This functions will be improved and called from a different function
in the following patches.
Link: https://lore.kernel.org/all/20230202110854.2318594-11-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is a preparation patch.
In order to pass warning/error messages during netlink calls back to
user space, pass the extack struct down the callstack of
can_changelink(), the actual error messages will be added in the
following ptaches.
Link: https://lore.kernel.org/all/20230202110854.2318594-10-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
NL_SET_ERR_MSG_FMT()
Since commit 51c352bdbcd2 ("netlink: add support for formatted extack
messages") formatted extack messages are supported to inform the user
space or warnings/errors during netlink calls.
Replace the netdev_err() by NL_SET_ERR_MSG_FMT() to better inform the
user about the problem. While there, use %u to print unsigned values
and improve error message a bit.
Link: https://lore.kernel.org/all/20230202110854.2318594-9-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The sample point is a value in tenths of a percent. Meaningful values
are between 0 and 1000. Invalid values are rejected and an error
message is returned to user space via netlink.
Link: https://lore.kernel.org/all/20230202110854.2318594-8-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
constants are provided
The CAN driver framework supports either fixed bit rates or bit timing
constants. Bail out during driver registration if both are given.
Link: https://lore.kernel.org/all/20230202110854.2318594-7-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Implement the function can_bittiming_const_valid() to check the
validity of the specified bit timing constant. Call this function from
register_candev() to check the bit timing constants during the
registration of the CAN interface.
Link: https://lore.kernel.org/all/20230202110854.2318594-6-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Clean up the code flow a bit, don't assign err variable but directly
return. Remove the unneeded else, too.
Link: https://lore.kernel.org/all/20230202110854.2318594-5-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The can_fixup_bittiming() function is used to validate the
user-supplied low-level bit timing parameters and calculate the
bitrate prescaler (brp) from the requested time quanta (tq) and the
CAN clock of the controller.
can_fixup_bittiming() selects the best matching integer bit rate
prescaler, which may result in a different time quantum than the value
specified by the user.
Calculate the resulting time quantum and assign it so that the user
sees the effective time quantum.
Link: https://lore.kernel.org/all/20230202110854.2318594-4-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Commit 1c47fa6b31c2 ("can: dev: add a helper function to calculate the
duration of one bit") made the constant CAN_SYNC_SEG available in a
header file.
The magic number 1 in can_fixup_bittiming() represents the width of
the sync segment, replace it by CAN_SYNC_SEG to make the code more
readable.
Link: https://lore.kernel.org/all/20230202110854.2318594-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Commit 1c47fa6b31c2 ("can: dev: add a helper function to calculate the
duration of one bit") added the helper function can_bit_time().
Replace open coded variants of can_bit_time() by the helper function.
Link: https://lore.kernel.org/all/20230202110854.2318594-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Pietro Borrello says:
====================
tuntap: correctly initialize socket uid
sock_init_data() assumes that the `struct socket` passed in input is
contained in a `struct socket_alloc` allocated with sock_alloc().
However, tap_open() and tun_chr_open() pass a `struct socket` embedded
in a `struct tap_queue` and `struct tun_file` respectively, both
allocated with sk_alloc().
This causes a type confusion when issuing a container_of() with
SOCK_INODE() in sock_init_data() which results in assigning a wrong
sk_uid to the `struct sock` in input.
Due to the type confusion, both sockets happen to have their uid set
to 0, i.e. root.
While it will be often correct, as tuntap devices require
CAP_NET_ADMIN, it may not always be the case.
Not sure how widespread is the impact of this, it seems the socket uid
may be used for network filtering and routing, thus tuntap sockets may
be incorrectly managed.
Additionally, it seems a socket with an incorrect uid may be returned
to the vhost driver when issuing a get_socket() on a tuntap device in
vhost_net_set_backend().
Fix the bugs by adding and using sock_init_data_uid(), which
explicitly takes a uid as argument.
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
---
Changes in v3:
- Fix the bug by defining and using sock_init_data_uid()
- Link to v2: https://lore.kernel.org/r/20230131-tuntap-sk-uid-v2-0-29ec15592813@diag.uniroma1.it
Changes in v2:
- Shorten and format comments
- Link to v1: https://lore.kernel.org/r/20230131-tuntap-sk-uid-v1-0-af4f9f40979d@diag.uniroma1.it
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sock_init_data() assumes that the `struct socket` passed in input is
contained in a `struct socket_alloc` allocated with sock_alloc().
However, tap_open() passes a `struct socket` embedded in a `struct
tap_queue` allocated with sk_alloc().
This causes a type confusion when issuing a container_of() with
SOCK_INODE() in sock_init_data() which results in assigning a wrong
sk_uid to the `struct sock` in input.
On default configuration, the type confused field overlaps with
padding bytes between `int vnet_hdr_sz` and `struct tap_dev __rcu
*tap` in `struct tap_queue`, which makes the uid of all tap sockets 0,
i.e., the root one.
Fix the assignment by using sock_init_data_uid().
Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sock_init_data() assumes that the `struct socket` passed in input is
contained in a `struct socket_alloc` allocated with sock_alloc().
However, tun_chr_open() passes a `struct socket` embedded in a `struct
tun_file` allocated with sk_alloc().
This causes a type confusion when issuing a container_of() with
SOCK_INODE() in sock_init_data() which results in assigning a wrong
sk_uid to the `struct sock` in input.
On default configuration, the type confused field overlaps with the
high 4 bytes of `struct tun_struct __rcu *tun` of `struct tun_file`,
NULL at the time of call, which makes the uid of all tun sockets 0,
i.e., the root one.
Fix the assignment by using sock_init_data_uid().
Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add sock_init_data_uid() to explicitly initialize the socket uid.
To initialise the socket uid, sock_init_data() assumes a the struct
socket* sock is always embedded in a struct socket_alloc, used to
access the corresponding inode uid. This may not be true.
Examples are sockets created in tun_chr_open() and tap_open().
Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir Oltean says:
====================
net: ENETC mqprio/taprio cleanup
Please excuse the increased patch set size compared to v4's 15 patches,
but Claudiu stirred up the pot :) when he pointed out that the mqprio
TXQ validation procedure is still incorrect, so I had to fix that, and
then do some consolidation work so that taprio doesn't duplicate
mqprio's bugs. Compared to v4, 3 patches are new and 1 was dropped for now
("net/sched: taprio: mask off bits in gate mask that exceed number of TCs"),
since there's not really much to gain from it. Since the previous patch
set has largely been reviewed, I hope that a delta overview will help
and make up for the large size.
v4->v5:
- new patches:
"[08/17] net/sched: mqprio: allow reverse TC:TXQ mappings"
"[11/17] net/sched: taprio: centralize mqprio qopt validation"
"[12/17] net/sched: refactor mqprio qopt reconstruction to a library function"
- changed patches worth revisiting:
"[09/17] net/sched: mqprio: allow offloading drivers to request queue
count validation"
v4 at:
https://patchwork.kernel.org/project/netdevbpf/cover/20230130173145.475943-1-vladimir.oltean@nxp.com/
v3->v4:
- adjusted patch 07/15 to not remove "#include <net/pkt_sched.h>" from
ti cpsw
https://patchwork.kernel.org/project/netdevbpf/cover/20230127001516.592984-1-vladimir.oltean@nxp.com/
v2->v3:
- move min_num_stack_tx_queues definition so it doesn't conflict with
the ethtool mm patches I haven't submitted yet for enetc (and also to
make use of a 4 byte hole)
- warn and mask off excess TCs in gate mask instead of failing
- finally CC qdisc maintainers
v2 at:
https://patchwork.kernel.org/project/netdevbpf/patch/20230126125308.1199404-16-vladimir.oltean@nxp.com/
v1->v2:
- patches 1->4 are new
- update some header inclusions in drivers
- fix typo (said "taprio" instead of "mqprio")
- better enetc mqprio error handling
- dynamically reconstruct mqprio configuration in taprio offload
- also let stmmac and tsnep use per-TXQ gate_mask
v1 (RFC) at:
https://patchwork.kernel.org/project/netdevbpf/cover/20230120141537.1350744-1-vladimir.oltean@nxp.com/
The main goal of this patch set is to make taprio pass the mqprio queue
configuration structure down to ndo_setup_tc() - patch 13/17. But mqprio
itself is not in the best shape currently, so there are some
consolidation patches on that as well.
Next, there are some consolidation patches in the enetc driver's
handling of TX queues and their traffic class assignment. Then, there is
a consolidation between the TX queue configuration for mqprio and
taprio.
Finally, there is a change in the meaning of the gate_mask passed by
taprio through ndo_setup_tc(). We introduce a capability through which
drivers can request the gate mask to be per TXQ. The default is changed
so that it is per TC.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We assume that the mqprio queue configuration from taprio has a simple
1:1 mapping between prio and traffic class, and one TX queue per TC.
That might not be the case. Actually parse and act upon the mqprio
config.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Regardless of the requested queue count per traffic class, the enetc
driver allocates a number of TX rings equal to the number of TCs, and
hardcodes a queue configuration of "1@0 1@1 ... 1@max-tc". Other
configurations are silently ignored and treated the same.
Improve that by allowing what the user requests to be actually
fulfilled. This allows more than one TX ring per traffic class.
For example:
$ tc qdisc add dev eno0 root handle 1: mqprio num_tc 4 \
map 0 0 1 1 2 2 3 3 queues 2@0 2@2 2@4 2@6
[ 146.267648] fsl_enetc 0000:00:00.0 eno0: TX ring 0 prio 0
[ 146.273451] fsl_enetc 0000:00:00.0 eno0: TX ring 1 prio 0
[ 146.283280] fsl_enetc 0000:00:00.0 eno0: TX ring 2 prio 1
[ 146.293987] fsl_enetc 0000:00:00.0 eno0: TX ring 3 prio 1
[ 146.300467] fsl_enetc 0000:00:00.0 eno0: TX ring 4 prio 2
[ 146.306866] fsl_enetc 0000:00:00.0 eno0: TX ring 5 prio 2
[ 146.313261] fsl_enetc 0000:00:00.0 eno0: TX ring 6 prio 3
[ 146.319622] fsl_enetc 0000:00:00.0 eno0: TX ring 7 prio 3
$ tc qdisc del dev eno0 root
[ 178.238418] fsl_enetc 0000:00:00.0 eno0: TX ring 0 prio 0
[ 178.244369] fsl_enetc 0000:00:00.0 eno0: TX ring 1 prio 0
[ 178.251486] fsl_enetc 0000:00:00.0 eno0: TX ring 2 prio 0
[ 178.258006] fsl_enetc 0000:00:00.0 eno0: TX ring 3 prio 0
[ 178.265038] fsl_enetc 0000:00:00.0 eno0: TX ring 4 prio 0
[ 178.271557] fsl_enetc 0000:00:00.0 eno0: TX ring 5 prio 0
[ 178.277910] fsl_enetc 0000:00:00.0 eno0: TX ring 6 prio 0
[ 178.284281] fsl_enetc 0000:00:00.0 eno0: TX ring 7 prio 0
$ tc qdisc add dev eno0 root handle 1: mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 1
[ 186.113162] fsl_enetc 0000:00:00.0 eno0: TX ring 0 prio 0
[ 186.118764] fsl_enetc 0000:00:00.0 eno0: TX ring 1 prio 1
[ 186.124374] fsl_enetc 0000:00:00.0 eno0: TX ring 2 prio 2
[ 186.130765] fsl_enetc 0000:00:00.0 eno0: TX ring 3 prio 3
[ 186.136404] fsl_enetc 0000:00:00.0 eno0: TX ring 4 prio 4
[ 186.142049] fsl_enetc 0000:00:00.0 eno0: TX ring 5 prio 5
[ 186.147674] fsl_enetc 0000:00:00.0 eno0: TX ring 6 prio 6
[ 186.153305] fsl_enetc 0000:00:00.0 eno0: TX ring 7 prio 7
The driver used to set TC_MQPRIO_HW_OFFLOAD_TCS, near which there is
this comment in the UAPI header:
TC_MQPRIO_HW_OFFLOAD_TCS, /* offload TCs, no queue counts */
which is what enetc was doing up until now (and no longer is; we offload
queue counts too), remove that assignment.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The enetc driver does not validate the mqprio queue configuration, so it
currently allows things like this:
$ tc qdisc add dev swp0 root handle 1: mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 3@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 1
But also things like this, completely omitting the queue configuration:
$ tc qdisc add dev eno0 root handle 1: mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 hw 1
By requesting validation via the mqprio capability structure, this is no
longer allowed, and we bring what is accepted by hardware in line with
what is accepted by software.
The check that num_tc <= real_num_tx_queues also becomes superfluous and
can be dropped, because mqprio_validate_queue_counts() validates that no
TXQ range exceeds real_num_tx_queues. That is a stronger check, because
there is at least 1 TXQ per TC, so there are at least as many TXQs as TCs.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are 2 classes of in-tree drivers currently:
- those who act upon struct tc_taprio_sched_entry :: gate_mask as if it
holds a bit mask of TXQs
- those who act upon the gate_mask as if it holds a bit mask of TCs
When it comes to the standard, IEEE 802.1Q-2018 does say this in the
second paragraph of section 8.6.8.4 Enhancements for scheduled traffic:
| A gate control list associated with each Port contains an ordered list
| of gate operations. Each gate operation changes the transmission gate
| state for the gate associated with each of the Port's traffic class
| queues and allows associated control operations to be scheduled.
In typically obtuse language, it refers to a "traffic class queue"
rather than a "traffic class" or a "queue". But careful reading of
802.1Q clarifies that "traffic class" and "queue" are in fact
synonymous (see 8.6.6 Queuing frames):
| A queue in this context is not necessarily a single FIFO data structure.
| A queue is a record of all frames of a given traffic class awaiting
| transmission on a given Bridge Port. The structure of this record is not
| specified.
i.o.w. their definition of "queue" isn't the Linux TX queue.
The gate_mask really is input into taprio via its UAPI as a mask of
traffic classes, but taprio_sched_to_offload() converts it into a TXQ
mask.
The breakdown of drivers which handle TC_SETUP_QDISC_TAPRIO is:
- hellcreek, felix, sja1105: these are DSA switches, it's not even very
clear what TXQs correspond to, other than purely software constructs.
Only the mqprio configuration with 8 TCs and 1 TXQ per TC makes sense.
So it's fine to convert these to a gate mask per TC.
- enetc: I have the hardware and can confirm that the gate mask is per
TC, and affects all TXQs (BD rings) configured for that priority.
- igc: in igc_save_qbv_schedule(), the gate_mask is clearly interpreted
to be per-TXQ.
- tsnep: Gerhard Engleder clarifies that even though this hardware
supports at most 1 TXQ per TC, the TXQ indices may be different from
the TC values themselves, and it is the TXQ indices that matter to
this hardware. So keep it per-TXQ as well.
- stmmac: I have a GMAC datasheet, and in the EST section it does
specify that the gate events are per TXQ rather than per TC.
- lan966x: again, this is a switch, and while not a DSA one, the way in
which it implements lan966x_mqprio_add() - by only allowing num_tc ==
NUM_PRIO_QUEUES (8) - makes it clear to me that TXQs are a purely
software construct here as well. They seem to map 1:1 with TCs.
- am65_cpsw: from looking at am65_cpsw_est_set_sched_cmds(), I get the
impression that the fetch_allow variable is treated like a prio_mask.
This definitely sounds closer to a per-TC gate mask rather than a
per-TXQ one, and TI documentation does seem to recomment an identity
mapping between TCs and TXQs. However, Roger Quadros would like to do
some testing before making changes, so I'm leaving this driver to
operate as it did before, for now. Link with more details at the end.
Based on this breakdown, we have 5 drivers with a gate mask per TC and
4 with a gate mask per TXQ. So let's make the gate mask per TXQ the
opt-in and the gate mask per TC the default.
Benefit from the TC_QUERY_CAPS feature that Jakub suggested we add, and
query the device driver before calling the proper ndo_setup_tc(), and
figure out if it expects one or the other format.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230202003621.2679603-15-vladimir.oltean@nxp.com/#25193204
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: Siddharth Vadapalli <s-vadapalli@ti.com>
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The taprio qdisc does not currently pass the mqprio queue configuration
down to the offloading device driver. So the driver cannot act upon the
TXQ counts/offsets per TC, or upon the prio->tc map. It was probably
assumed that the driver only wants to offload num_tc (see
TC_MQPRIO_HW_OFFLOAD_TCS), which it can get from netdev_get_num_tc(),
but there's clearly more to the mqprio configuration than that.
I've considered 2 mechanisms to remedy that. First is to pass a struct
tc_mqprio_qopt_offload as part of the tc_taprio_qopt_offload. The second
is to make taprio actually call TC_SETUP_QDISC_MQPRIO, *in addition to*
TC_SETUP_QDISC_TAPRIO.
The difference is that in the first case, existing drivers (offloading
or not) all ignore taprio's mqprio portion currently, whereas in the
second case, we could control whether to call TC_SETUP_QDISC_MQPRIO,
based on a new capability. The question is which approach would be
better.
I'm afraid that calling TC_SETUP_QDISC_MQPRIO unconditionally (not based
on a taprio capability bit) would risk introducing regressions. For
example, taprio doesn't populate (or validate) qopt->hw, as well as
mqprio.flags, mqprio.shaper, mqprio.min_rate, mqprio.max_rate.
In comparison, adding a capability is functionally equivalent to just
passing the mqprio in a way that drivers can ignore it, except it's
slightly more complicated to use it (need to set the capability).
Ultimately, what made me go for the "mqprio in taprio" variant was that
it's easier for offloading drivers to interpret the mqprio qopt slightly
differently when it comes from taprio vs when it comes from mqprio,
should that ever become necessary.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The taprio qdisc will need to reconstruct a struct tc_mqprio_qopt from
netdev settings once more in a future patch, but this code was already
written twice, once in taprio and once in mqprio.
Refactor the code to a helper in the common mqprio library.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a lot of code in taprio which is "borrowed" from mqprio.
It makes sense to put a stop to the "borrowing" and start actually
reusing code.
Because taprio and mqprio are built as part of different kernel modules,
code reuse can only take place either by writing it as static inline
(limiting), putting it in sch_generic.o (not generic enough), or
creating a third auto-selectable kernel module which only holds library
code. I opted for the third variant.
In a previous change, mqprio gained support for reverse TC:TXQ mappings,
something which taprio still denies. Make taprio use the same validation
logic so that it supports this configuration as well.
The taprio code didn't enforce TXQ overlaps in txtime-assist mode and
that looks intentional, even if I've no idea why that might be. Preserve
that, but add a comment.
There isn't any dedicated MAINTAINERS entry for mqprio, so nothing to
update there.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To make mqprio more user-friendly, create netlink extended ack messages
which say exactly what is wrong about the queue counts. This uses the
new support for printf-formatted extack messages.
Example:
$ tc qdisc add dev eno0 root handle 1: mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 3@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
Error: sch_mqprio: TC 0 queues 3@0 overlap with TC 1 queues 1@1.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mqprio_parse_opt() proudly has a comment:
/* If hardware offload is requested we will leave it to the device
* to either populate the queue counts itself or to validate the
* provided queue counts.
*/
Unfortunately some device drivers did not get this memo, and don't
validate the queue counts, or populate them.
In case drivers don't want to populate the queue counts themselves, just
act upon the requested configuration, it makes sense to introduce a tc
capability, and make mqprio query it, so they don't have to do the
validation themselves.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By imposing that the last TXQ of TC i is smaller than the first TXQ of
any TC j (j := i+1 .. n), mqprio imposes a strict ordering condition for
the TXQ indices (they must increase as TCs increase).
Claudiu points out that the complexity of the TXQ count validation is
too high for this logic, i.e. instead of iterating over j, it is
sufficient that the TXQ indices of TC i and i + 1 are ordered, and that
will eventually ensure global ordering.
This is true, however it doesn't appear to me that is what the code
really intended to do. Instead, based on the comments, it just wanted to
check for overlaps (and this isn't how one does that).
So the following mqprio configuration, which I had recommended to
Vinicius more than once for igb/igc (to account for the fact that on
this hardware, lower numbered TXQs have higher dequeue priority than
higher ones):
num_tc 4 map 0 1 2 3 queues 1@3 1@2 1@1 1@0
is in fact denied today by mqprio.
The full story is that in fact, it's only denied with "hw 0"; if
hardware offloading is requested, mqprio defers TXQ range overlap
validation to the device driver (a strange decision in itself).
This is most certainly a bug, but it's not one that has any merit for
being fixed on "stable" as far as I can tell. This is because mqprio
always rejected a configuration which was in fact valid, and this has
shaped the way in which mqprio configuration scripts got built for
various hardware (see igb/igc in the link below). Therefore, one could
consider it to be merely an improvement for mqprio to allow reverse
TC:TXQ mappings.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230130173145.475943-9-vladimir.oltean@nxp.com/#25188310
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230128010719.2182346-6-vladimir.oltean@nxp.com/#25186442
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since mqprio is a scheduler and not a classifier, move its offload
structure to pkt_sched.h, where struct tc_taprio_qopt_offload also lies.
Also update some header inclusions in drivers that access this
structure, to the best of my abilities.
Cc: Igor Russkikh <irusskikh@marvell.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: Daniel Machon <daniel.machon@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some more logic will be added to mqprio offloading, so split that code
up from mqprio_init(), which is already large, and create a new
function, mqprio_enable_offload(), similar to taprio_enable_offload().
Also create the opposite function mqprio_disable_offload().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mqprio_init() is quite large and unwieldy to add more code to.
Split the netlink attribute parsing to a dedicated function.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IRQs are currently requested before the netdevice is registered
and a proper name is assigned to the device. Changing interrupt
name to avoid using the format string in the name.
Interrupt name before change: eth%d-ntfy-block.<blk_id>
Interrupt name after change: gve-ntfy-blk<blk_id>@pci:<pci_name>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
net: implement devlink reload in ice
Michal Swiatkowski says:
This is a part of changes done in patchset [0]. Resource management is
kind of controversial part, so I split it into two patchsets.
It is the first one, covering refactor and implement reload API call.
The refactor will unblock some of the patches needed by SIOV or
subfunction.
Most of this patchset is about implementing driver reload mechanism.
Part of code from probe and rebuild is used to not duplicate code.
To allow this reuse probe and rebuild path are split into smaller
functions.
Patch "ice: split ice_vsi_setup into smaller functions" changes
boolean variable in function call to integer and adds define
for it. Instead of having the function called with true/false now it
can be called with readable defines ICE_VSI_FLAG_INIT or
ICE_VSI_FLAG_NO_INIT. It was suggested by Jacob Keller and probably this
mechanism will be implemented across ice driver in follow up patchset.
Previously the code was reviewed here [0].
[0] https://lore.kernel.org/netdev/Y3ckRWtAtZU1BdXm@unreal/T/#m3bb8feba0a62f9b4cd54cd94917b7e2143fc2ecd
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
