| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit 9fc96c7c19df ("selftests: error out if kernel header
files are not yet built").
It turns out that requiring the kernel headers to be built as a
prerequisite to building selftests, does not work in many cases. For
example, Peter Zijlstra writes:
"My biggest beef with the whole thing is that I simply do not want to use
'make headers', it doesn't work for me.
I have a ton of output directories and I don't care to build tools into
the output dirs, in fact some of them flat out refuse to work that way
(bpf comes to mind)." [1]
Therefore, stop erroring out on the selftests build. Additional patches
will be required in order to change over to not requiring the kernel
headers.
[1] https://lore.kernel.org/20231208221007.GO28727@noisy.programming.kicks-ass.net
Link: https://lkml.kernel.org/r/20231209020144.244759-1-jhubbard@nvidia.com
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If crash_base is equal to CRASH_ADDR_LOW_MAX, it also indicates that
the crashkernel memory is allocated from high memory. However, the
current check only considers the case where crash_base is greater than
CRASH_ADDR_LOW_MAX. Fix it.
The runtime effects is that crashkernel high memory is successfully
reserved, whereas the crashkernel low memory is bypassed in this case,
then kdump kernel bootup will fail because of no low memory under 4G.
This patch also includes some minor cleanups.
Link: https://lkml.kernel.org/r/20231209141438.77233-1-ytcoode@gmail.com
Fixes: 0ab97169aa05 ("crash_core: add generic function to do reservation")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With the current ifdeffery CONFIG_KEXEC, get_cmdline_acpi_rsdp() is only
available when kexec_load interface is taken, while kexec_file_load
interface can't make use of it.
Now change it to CONFIG_KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231208073036.7884-6-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config
items are set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
Here, change the dependency of building kexec_core related object files,
and the ifdeffery on SuperH from CONFIG_KEXEC to CONFIG_KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231208073036.7884-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
--------------------------------------------------------------------
mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free':
kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup'
mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec':
kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec'
mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec':
kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec'
--------------------------------------------------------------------
Here, change the dependency of building kexec_core related object files,
and the ifdeffery in mips from CONFIG_KEXEC to CONFIG_KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231208073036.7884-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311302042.sn8cDPIX-lkp@intel.com/
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
Here, change the dependency of buinding machine_kexec.o relocate_kernel.o
and the ifdeffery in asm/kexe.h to CONFIG_KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231208073036.7884-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kexec: fix the incorrect ifdeffery and dependency of
CONFIG_KEXEC".
The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
E.g on mips, below link error are seen:
--------------------------------------------------------------------
mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free':
kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup'
mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec':
kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec'
mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec':
kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec'
--------------------------------------------------------------------
Here, change the incorrect dependency of building kexec_core related
object files, and the ifdeffery on architectures from CONFIG_KEXEC to
CONFIG_KEXEC_CORE.
Testing:
========
Passed on mips and loognarch with the LKP reproducer.
This patch (of 5):
Currently, in arch/loongarch/kernel/Makefile, building machine_kexec.o
relocate_kernel.o depends on CONFIG_KEXEC.
Whereas, since we will drop the select of KEXEC for CRASH_DUMP in
kernel/Kconfig.kexec, compiling error will be triggered if below config
items are set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
---------------------------------------------------------------
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L209':
>> kexec_core.c:(.text+0x1660): undefined reference to `machine_kexec_cleanup'
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L287':
>> kexec_core.c:(.text+0x1c5c): undefined reference to `machine_crash_shutdown'
>> loongarch64-linux-ld: kexec_core.c:(.text+0x1c64): undefined reference to `machine_kexec'
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L2^B5':
>> kexec_core.c:(.text+0x2090): undefined reference to `machine_shutdown'
loongarch64-linux-ld: kexec_core.c:(.text+0x20a0): undefined reference to `machine_kexec'
---------------------------------------------------------------
Here, change the dependency of machine_kexec.o relocate_kernel.o to
CONFIG_KEXEC_CORE can fix above building error.
Link: https://lkml.kernel.org/r/20231208073036.7884-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20231208073036.7884-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311300946.kHE9Iu71-lkp@intel.com/
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The cleanup tasks of kdamond threads including reset of corresponding
DAMON context's ->kdamond field and decrease of global nr_running_ctxs
counter is supposed to be executed by kdamond_fn(). However, commit
0f91d13366a4 ("mm/damon: simplify stop mechanism") made neither
damon_start() nor damon_stop() ensure the corresponding kdamond has
started the execution of kdamond_fn().
As a result, the cleanup can be skipped if damon_stop() is called fast
enough after the previous damon_start(). Especially the skipped reset
of ->kdamond could cause a use-after-free.
Fix it by waiting for start of kdamond_fn() execution from
damon_start().
Link: https://lkml.kernel.org/r/20231208175018.63880-1-sj@kernel.org
Fixes: 0f91d13366a4 ("mm/damon: simplify stop mechanism")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Doing a ksft_print_msg() before the ksft_print_header() seems to confuse
the ksft framework in a strange way: running the test on the cmdline
results in the expected output.
But piping the output somewhere else, results in some odd output,
whereby we repeatedly get the same info printed:
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
Doing the ksft_print_header() first seems to resolve that and gives us
the output we expect:
TAP version 13
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
ok 2 No leak from parent into child
# [RUN] Basic COW after fork() ... with THP
ok 3 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped-out THP
ok 4 No leak from parent into child
# [RUN] Basic COW after fork() ... with PTE-mapped THP
ok 5 No leak from parent into child
Link: https://lkml.kernel.org/r/20231206103558.38040-1-david@redhat.com
Fixes: f4b5fd6946e2 ("selftests/vm: anon_cow: THP tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After converting selinux to VMA heap check helper, the gcl triggers an
execheap SELinux denial, which is caused by a changed logic check.
Previously selinux only checked that the VMA range was within the VMA heap
range, and the implementation checks the intersection between the two
ranges, but the corner case (vm_end=start_brk, brk=vm_start) isn't handled
correctly.
Since commit 11250fd12eb8 ("mm: factor out VMA stack and heap checks") was
only a function extraction, it seems that the issue was introduced by
commit 0db0c01b53a1 ("procfs: fix /proc/<pid>/maps heap check"). Let's
fix above corner cases, meanwhile, correct the wrong indentation of the
stack and heap check helpers.
Fixes: 11250fd12eb8 ("mm: factor out VMA stack and heap checks")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Closes: https://lore.kernel.org/selinux/CAFqZXNv0SVT0fkOK6neP9AXbj3nxJ61JAY4+zJzvxqJaeuhbFw@mail.gmail.com/
Tested-by: Ondrej Mosnacek <omosnace@redhat.com>
Link: https://lkml.kernel.org/r/20231207152525.2607420-1-wangkefeng.wang@huawei.com
Cc: David Hildenbrand <david@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When below config items are set, compiler complained:
--------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
......
-----------------------
-------------------------------------------------------------------
arch/riscv/kernel/crash_core.c: In function 'arch_crash_save_vmcoreinfo':
arch/riscv/kernel/crash_core.c:11:58: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'int' [-Wformat=]
11 | vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n", VMALLOC_START);
| ~~^
| |
| long unsigned int
| %x
----------------------------------------------------------------------
This is because on riscv macro VMALLOC_START has different type when
CONFIG_MMU is set or unset.
arch/riscv/include/asm/pgtable.h:
--------------------------------------------------
Changing it to _AC(0, UL) in case CONFIG_MMU=n can fix the warning.
Link: https://lkml.kernel.org/r/ZW7OsX4zQRA3mO4+@MiWiFi-R3L-srv
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit f8ff23429c62 ("kernel/Kconfig.kexec: drop select of KEXEC for
CRASH_DUMP") we tried to fix a config regression, where CONFIG_CRASH_DUMP
required CONFIG_KEXEC.
However, it was not enough at least for arm64 platforms. While further
testing the patch with our arm64 config I noticed that CONFIG_CRASH_DUMP
is unavailable in menuconfig. This is because CONFIG_CRASH_DUMP still
depends on the new CONFIG_ARCH_SUPPORTS_KEXEC introduced in commit
91506f7e5d21 ("arm64/kexec: refactor for kernel/Kconfig.kexec") and on
arm64 CONFIG_ARCH_SUPPORTS_KEXEC requires CONFIG_PM_SLEEP_SMP=y, which in
turn requires either CONFIG_SUSPEND=y or CONFIG_HIBERNATION=y neither of
which are set in our config.
Given that we already established that CONFIG_KEXEC (which is a switch for
kexec system call itself) is not required for CONFIG_CRASH_DUMP drop
CONFIG_ARCH_SUPPORTS_KEXEC dependency as well. The arm64 kernel builds
just fine with CONFIG_CRASH_DUMP=y and with both CONFIG_KEXEC=n and
CONFIG_KEXEC_FILE=n after f8ff23429c62 ("kernel/Kconfig.kexec: drop select
of KEXEC for CRASH_DUMP") and this patch are applied given that the
necessary shared bits are included via CONFIG_KEXEC_CORE dependency.
[bhe@redhat.com: don't export some symbols when CONFIG_MMU=n]
Link: https://lkml.kernel.org/r/ZW03ODUKGGhP1ZGU@MiWiFi-R3L-srv
[bhe@redhat.com: riscv, kexec: fix dependency of two items]
Link: https://lkml.kernel.org/r/ZW04G/SKnhbE5mnX@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20231129220409.55006-1-ignat@cloudflare.com
Fixes: 91506f7e5d21 ("arm64/kexec: refactor for kernel/Kconfig.kexec")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 6.6+: f8ff234: kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
Cc: <stable@vger.kernel.org> # 6.6+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
I conducted real-time testing and observed that
madvise_cold_or_pageout_pte_range() causes significant latency under
memory pressure, which can be effectively reduced by adding cond_resched()
within the loop.
I tested on the LicheePi 4A board using Cylictest for latency testing and
Ftrace for latency tracing. The board uses TH1520 processor and has a
memory size of 8GB. The kernel version is 6.5.0 with the PREEMPT_RT patch
applied.
The script I tested is as follows:
echo wakeup_rt > /sys/kernel/tracing/current_tracer
echo 1 > /sys/kernel/tracing/tracing_on
echo 0 > /sys/kernel/tracing/tracing_max_latency
stress-ng --vm 8 --vm-bytes 2G &
cyclictest --mlockall --smp --priority=99 --distance=0 --duration=30m
echo 0 > /sys/kernel/tracing/tracing_on
cat /sys/kernel/tracing/trace
The tracing results before modification are as follows:
# tracer: wakeup_rt
#
# wakeup_rt latency trace v1.1.5 on 6.5.0-rt6-r1208-00003-g999d221864bf
# --------------------------------------------------------------------
# latency: 2552 us, #6/6, CPU#3 | (M:preempt_rt VP:0, KP:0, SP:0 HP:0 #P:4)
# -----------------
# | task: cyclictest-196 (uid:0 nice:0 policy:1 rt_prio:99)
# -----------------
#
# _--------=> CPU#
# / _-------=> irqs-off/BH-disabled
# | / _------=> need-resched
# || / _-----=> need-resched-lazy
# ||| / _----=> hardirq/softirq
# |||| / _---=> preempt-depth
# ||||| / _--=> preempt-lazy-depth
# |||||| / _-=> migrate-disable
# ||||||| / delay
# cmd pid |||||||| time | caller
# \ / |||||||| \ | /
stress-n-206 3dn.h512 2us : 206:120:R + [003] 196: 0:R cyclictest
stress-n-206 3dn.h512 7us : <stack trace>
=> __ftrace_trace_stack
=> __trace_stack
=> probe_wakeup
=> ttwu_do_activate
=> try_to_wake_up
=> wake_up_process
=> hrtimer_wakeup
=> __hrtimer_run_queues
=> hrtimer_interrupt
=> riscv_timer_interrupt
=> handle_percpu_devid_irq
=> generic_handle_domain_irq
=> riscv_intc_irq
=> handle_riscv_irq
=> do_irq
stress-n-206 3dn.h512 9us#: 0
stress-n-206 3d...3.. 2544us : __schedule
stress-n-206 3d...3.. 2545us : 206:120:R ==> [003] 196: 0:R cyclictest
stress-n-206 3d...3.. 2551us : <stack trace>
=> __ftrace_trace_stack
=> __trace_stack
=> probe_wakeup_sched_switch
=> __schedule
=> preempt_schedule
=> migrate_enable
=> rt_spin_unlock
=> madvise_cold_or_pageout_pte_range
=> walk_pgd_range
=> __walk_page_range
=> walk_page_range
=> madvise_pageout
=> madvise_vma_behavior
=> do_madvise
=> sys_madvise
=> do_trap_ecall_u
=> ret_from_exception
The tracing results after modification are as follows:
# tracer: wakeup_rt
#
# wakeup_rt latency trace v1.1.5 on 6.5.0-rt6-r1208-00004-gca3876fc69a6-dirty
# --------------------------------------------------------------------
# latency: 1689 us, #6/6, CPU#0 | (M:preempt_rt VP:0, KP:0, SP:0 HP:0 #P:4)
# -----------------
# | task: cyclictest-217 (uid:0 nice:0 policy:1 rt_prio:99)
# -----------------
#
# _--------=> CPU#
# / _-------=> irqs-off/BH-disabled
# | / _------=> need-resched
# || / _-----=> need-resched-lazy
# ||| / _----=> hardirq/softirq
# |||| / _---=> preempt-depth
# ||||| / _--=> preempt-lazy-depth
# |||||| / _-=> migrate-disable
# ||||||| / delay
# cmd pid |||||||| time | caller
# \ / |||||||| \ | /
stress-n-232 0dn.h413 1us+: 232:120:R + [000] 217: 0:R cyclictest
stress-n-232 0dn.h413 12us : <stack trace>
=> __ftrace_trace_stack
=> __trace_stack
=> probe_wakeup
=> ttwu_do_activate
=> try_to_wake_up
=> wake_up_process
=> hrtimer_wakeup
=> __hrtimer_run_queues
=> hrtimer_interrupt
=> riscv_timer_interrupt
=> handle_percpu_devid_irq
=> generic_handle_domain_irq
=> riscv_intc_irq
=> handle_riscv_irq
=> do_irq
stress-n-232 0dn.h413 19us#: 0
stress-n-232 0d...3.. 1671us : __schedule
stress-n-232 0d...3.. 1676us+: 232:120:R ==> [000] 217: 0:R cyclictest
stress-n-232 0d...3.. 1687us : <stack trace>
=> __ftrace_trace_stack
=> __trace_stack
=> probe_wakeup_sched_switch
=> __schedule
=> preempt_schedule
=> migrate_enable
=> free_unref_page_list
=> release_pages
=> free_pages_and_swap_cache
=> tlb_batch_pages_flush
=> tlb_flush_mmu
=> unmap_page_range
=> unmap_vmas
=> unmap_region
=> do_vmi_align_munmap.constprop.0
=> do_vmi_munmap
=> __vm_munmap
=> sys_munmap
=> do_trap_ecall_u
=> ret_from_exception
After the modification, the cause of maximum latency is no longer
madvise_cold_or_pageout_pte_range(), so this modification can reduce the
latency caused by madvise_cold_or_pageout_pte_range().
Currently the madvise_cold_or_pageout_pte_range() function exhibits
significant latency under memory pressure, which can be effectively
reduced by adding cond_resched() within the loop.
When the batch_count reaches SWAP_CLUSTER_MAX, we reschedule
the task to ensure fairness and avoid long lock holding times.
Link: https://lkml.kernel.org/r/85363861af65fac66c7a98c251906afc0d9c8098.1695291046.git.wangjiexun@tinylab.org
Signed-off-by: Jiexun Wang <wangjiexun@tinylab.org>
Cc: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If nilfs2 reads a disk image with corrupted segment usage metadata, and
its segment usage information is marked as an error for the segment at the
write location, nilfs_sufile_set_segment_usage() can trigger WARN_ONs
during log writing.
Segments newly allocated for writing with nilfs_sufile_alloc() will not
have this error flag set, but this unexpected situation will occur if the
segment indexed by either nilfs->ns_segnum or nilfs->ns_nextnum (active
segment) was marked in error.
Fix this issue by inserting a sanity check to treat it as a file system
corruption.
Since error returns are not allowed during the execution phase where
nilfs_sufile_set_segment_usage() is used, this inserts the sanity check
into nilfs_sufile_mark_dirty() which pre-reads the buffer containing the
segment usage record to be updated and sets it up in a dirty state for
writing.
In addition, nilfs_sufile_set_segment_usage() is also called when
canceling log writing and undoing segment usage update, so in order to
avoid issuing the same kernel warning in that case, in case of
cancellation, avoid checking the error flag in
nilfs_sufile_set_segment_usage().
Link: https://lkml.kernel.org/r/20231205085947.4431-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+14e9f834f6ddecece094@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=14e9f834f6ddecece094
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit a08c7193e4f1 "mm/filemap: remove hugetlb special casing in
filemap.c", hugetlb pages are stored in the page cache in base page sized
indexes. This leads to multi index stores in the xarray which is only
supporting through CONFIG_XARRAY_MULTI. The other page cache user of
multi index stores ,THP, selects XARRAY_MULTI. Have CONFIG_HUGETLB_PAGE
follow this behavior as well to avoid the BUG() with a CONFIG_HUGETLB_PAGE
&& !CONFIG_XARRAY_MULTI config.
Link: https://lkml.kernel.org/r/20231204183234.348697-1-sidhartha.kumar@oracle.com
Fixes: a08c7193e4f1 ("mm/filemap: remove hugetlb special casing in filemap.c")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After the conversion to bus_to_subsys() and class_to_subsys(), the gdb
scripts listing the system buses and classes respectively was broken, fix
those by returning the subsys_priv pointer and have the various caller
de-reference either the 'bus' or 'class' structure members accordingly.
Link: https://lkml.kernel.org/r/20231130043317.174188-1-florian.fainelli@broadcom.com
Fixes: 7b884b7f24b4 ("driver core: class.c: convert to only use class_to_subsys")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
He is currently inactive (last message from him is two years ago [1]).
His media tree [2] is also dormant (latest activity is 6 years ago), yet
his site is still online [3].
Drop him from MAINTAINERS and add CREDITS entry for him. We thank him
for maintaining various DVB drivers.
[1]: https://lore.kernel.org/all/660772b3-0597-02db-ed94-c6a9be04e8e8@iki.fi/
[2]: https://git.linuxtv.org/anttip/media_tree.git/
[3]: https://palosaari.fi/linux/
Link: https://lkml.kernel.org/r/20231130083848.5396-1-bagasdotme@gmail.com
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clang static checker complains that value stored to 'from' is never read.
And memcpy_from_folio() only copy the last chunk memory from folio to
destination. Use 'to += chunk' to replace 'from += chunk' to fix this
typo problem.
Link: https://lkml.kernel.org/r/20231130034017.1210429-1-suhui@nfschina.com
Fixes: b23d03ef7af5 ("highmem: add memcpy_to_folio() and memcpy_from_folio()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When mounting a filesystem image with a block size larger than the page
size, nilfs2 repeatedly outputs long error messages with stack traces to
the kernel log, such as the following:
getblk(): invalid block size 8192 requested
logical block size: 512
...
Call Trace:
dump_stack_lvl+0x92/0xd4
dump_stack+0xd/0x10
bdev_getblk+0x33a/0x354
__breadahead+0x11/0x80
nilfs_search_super_root+0xe2/0x704 [nilfs2]
load_nilfs+0x72/0x504 [nilfs2]
nilfs_mount+0x30f/0x518 [nilfs2]
legacy_get_tree+0x1b/0x40
vfs_get_tree+0x18/0xc4
path_mount+0x786/0xa88
__ia32_sys_mount+0x147/0x1a8
__do_fast_syscall_32+0x56/0xc8
do_fast_syscall_32+0x29/0x58
do_SYSENTER_32+0x15/0x18
entry_SYSENTER_32+0x98/0xf1
...
This overloads the system logger. And to make matters worse, it sometimes
crashes the kernel with a memory access violation.
This is because the return value of the sb_set_blocksize() call, which
should be checked for errors, is not checked.
The latter issue is due to out-of-buffer memory being accessed based on a
large block size that caused sb_set_blocksize() to fail for buffers read
with the initial minimum block size that remained unupdated in the
super_block structure.
Since nilfs2 mkfs tool does not accept block sizes larger than the system
page size, this has been overlooked. However, it is possible to create
this situation by intentionally modifying the tool or by passing a
filesystem image created on a system with a large page size to a system
with a smaller page size and mounting it.
Fix this issue by inserting the expected error handling for the call to
sb_set_blocksize().
Link: https://lkml.kernel.org/r/20231129141547.4726-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ignat Korchagin complained that a potential config regression was
introduced by commit 89cde455915f ("kexec: consolidate kexec and crash
options into kernel/Kconfig.kexec"). Before the commit, CONFIG_CRASH_DUMP
has no dependency on CONFIG_KEXEC. After the commit, CRASH_DUMP selects
KEXEC. That enforces system to have CONFIG_KEXEC=y as long as
CONFIG_CRASH_DUMP=Y which people may not want.
In Ignat's case, he sets CONFIG_CRASH_DUMP=y, CONFIG_KEXEC_FILE=y and
CONFIG_KEXEC=n because kexec_load interface could have security issue if
kernel/initrd has no chance to be signed and verified.
CRASH_DUMP has select of KEXEC because Eric, author of above commit, met a
LKP report of build failure when posting patch of earlier version. Please
see below link to get detail of the LKP report:
https://lore.kernel.org/all/3e8eecd1-a277-2cfb-690e-5de2eb7b988e@oracle.com/T/#u
In fact, that LKP report is triggered because arm's <asm/kexec.h> is
wrapped in CONFIG_KEXEC ifdeffery scope. That is wrong. CONFIG_KEXEC
controls the enabling/disabling of kexec_load interface, but not kexec
feature. Removing the wrongly added CONFIG_KEXEC ifdeffery scope in
<asm/kexec.h> of arm allows us to drop the select KEXEC for CRASH_DUMP.
Meanwhile, change arch/arm/kernel/Makefile to let machine_kexec.o
relocate_kernel.o depend on KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231128054457.659452-1-bhe@redhat.com
Fixes: 89cde455915f ("kexec: consolidate kexec and crash options into kernel/Kconfig.kexec")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com> [compile-time only]
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
BITS_PER_BYTE is defined in bits.h.
Link: https://lkml.kernel.org/r/20231128174404.393393-1-andriy.shevchenko@linux.intel.com
Fixes: e8eed5f7366f ("units: Add BYTES_PER_*BIT")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Damian Muszynski <damian.muszynski@intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit 88a6f8994421 ("crash: memory and CPU hotplug sysfs
attributes"), on x86_64, if only below kernel configs related to kdump are
set, compiling error are triggered.
----
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_HOTPLUG=y
------
------------------------------------------------------
drivers/base/cpu.c: In function `crash_hotplug_show':
drivers/base/cpu.c:309:40: error: implicit declaration of function `crash_hotplug_cpu_support'; did you mean `crash_hotplug_show'? [-Werror=implicit-function-declaration]
309 | return sysfs_emit(buf, "%d\n", crash_hotplug_cpu_support());
| ^~~~~~~~~~~~~~~~~~~~~~~~~
| crash_hotplug_show
cc1: some warnings being treated as errors
------------------------------------------------------
CONFIG_KEXEC is used to enable kexec_load interface, the
crash_notes/crash_notes_size/crash_hotplug showing depends on
CONFIG_KEXEC is incorrect. It should depend on KEXEC_CORE instead.
Fix it now.
Link: https://lkml.kernel.org/r/20231128055248.659808-1-bhe@redhat.com
Fixes: 88a6f8994421 ("crash: memory and CPU hotplug sysfs attributes")
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com> [compile-time only]
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If a scheme is set to not applied to any monitoring target region for any
reasons including the target access pattern, quota, filters, or
watermarks, writing 'update_schemes_tried_regions' to 'state' DAMON sysfs
file can indefinitely hang. Fix the case by implementing a timeout for
the operation. The time limit is two apply intervals of each scheme.
Link: https://lkml.kernel.org/r/20231124213840.39157-1-sj@kernel.org
Fixes: 4d4e41b68299 ("mm/damon/sysfs-schemes: do not update tried regions more than one DAMON snapshot")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit 8e1f385104ac ("kill task_struct->thread_group") remove
the thread_group, we will encounter below issue.
(gdb) lx-ps
TASK PID COMM
0xffff800086503340 0 swapper/0
Python Exception <class 'gdb.error'>: There is no member named thread_group.
Error occurred in Python: There is no member named thread_group.
We use signal->thread_head to iterate all threads instead.
[Kuan-Ying.Lee@mediatek.com: v2]
Link: https://lkml.kernel.org/r/20231129065142.13375-2-Kuan-Ying.Lee@mediatek.com
Link: https://lkml.kernel.org/r/20231127070404.4192-2-Kuan-Ying.Lee@mediatek.com
Fixes: 8e1f385104ac ("kill task_struct->thread_group")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
PTE_MARKER_UFFD_WP is a subconfig for userfaultfd. To make it clear,
switch to use menuconfig for userfaultfd.
Link: https://lkml.kernel.org/r/20231123224204.1060152-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 05f1edac8009 ("selftests/mm: run all tests from run_vmtests.sh")
fixed the inconsistency caused by tests being defined as TEST_GEN_PROGS.
This issue was leading to tests not being executed via run_vmtests.sh and
furthermore some tests running twice due to the kselftests wrapper also
executing them.
Fix the definition of two tests (soft-dirty and pagemap_ioctl) that are
still incorrectly defined.
Link: https://lkml.kernel.org/r/20231120222908.28559-1-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Regions split function ('damon_split_region_at()') is called at the
beginning of an aggregation interval, and when DAMOS applying the actions
and charging quota. Because 'nr_accesses' fields of all regions are reset
at the beginning of each aggregation interval, and DAMOS was applying the
action at the end of each aggregation interval, there was no need to copy
the 'nr_accesses' field to the split-out region.
However, commit 42f994b71404 ("mm/damon/core: implement scheme-specific
apply interval") made DAMOS applies action on its own timing interval.
Hence, 'nr_accesses' should also copied to split-out regions, but the
commit didn't. Fix it by copying it.
Link: https://lkml.kernel.org/r/20231119171529.66863-1-sj@kernel.org
Fixes: 42f994b71404 ("mm/damon/core: implement scheme-specific apply interval")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
group_cpus_evenly() could be part of storage driver's error handler, such
as nvme driver, when may happen during CPU hotplug, in which storage queue
has to drain its pending IOs because all CPUs associated with the queue
are offline and the queue is becoming inactive. And handling IO needs
error handler to provide forward progress.
Then deadlock is caused:
1) inside CPU hotplug handler, CPU hotplug lock is held, and blk-mq's
handler is waiting for inflight IO
2) error handler is waiting for CPU hotplug lock
3) inflight IO can't be completed in blk-mq's CPU hotplug handler
because error handling can't provide forward progress.
Solve the deadlock by not holding CPU hotplug lock in group_cpus_evenly(),
in which two stage spreads are taken: 1) the 1st stage is over all present
CPUs; 2) the end stage is over all other CPUs.
Turns out the two stage spread just needs consistent 'cpu_present_mask',
and remove the CPU hotplug lock by storing it into one local cache. This
way doesn't change correctness, because all CPUs are still covered.
Link: https://lkml.kernel.org/r/20231120083559.285174-1-ming.lei@redhat.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All addresses printed by checkstack have an extra incorrect 0 appended at
the end.
This was introduced with commit 677f1410e058 ("scripts/checkstack.pl: don't
display $dre as different entity"): since then the address is taken from
the line which contains the function name, instead of the line which
contains stack consumption. E.g. on s390:
0000000000100a30 <do_one_initcall>:
...
100a44: e3 f0 ff 70 ff 71 lay %r15,-144(%r15)
So the used regex which matches spaces and hexadecimal numbers to extract
an address now matches a different substring. Subsequently replacing spaces
with 0 appends a zero at the and, instead of replacing leading spaces.
Fix this by using the proper regex, and simplify the code a bit.
Link: https://lkml.kernel.org/r/20231120183719.2188479-2-hca@linux.ibm.com
Fixes: 677f1410e058 ("scripts/checkstack.pl: don't display $dre as different entity")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Maninder Singh <maninder1.s@samsung.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vaneet Narang <v.narang@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In add_memory_resource(), creation of memory block devices occurs after
successful call to arch_add_memory(). However, creation of memory block
devices could fail. In that case, arch_remove_memory() is called to
perform necessary cleanup.
Currently with or without altmap support, arch_remove_memory() is always
passed with altmap set to NULL during error handling. This leads to
freeing of struct pages using free_pages(), eventhough the allocation
might have been performed with altmap support via
altmap_alloc_block_buf().
Fix the error handling by passing altmap in arch_remove_memory(). This
ensures the following:
* When altmap is disabled, deallocation of the struct pages array occurs
via free_pages().
* When altmap is enabled, deallocation occurs via vmem_altmap_free().
Link: https://lkml.kernel.org/r/20231120145354.308999-3-sumanthk@linux.ibm.com
Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
From Documentation/core-api/memory-hotplug.rst:
When adding/removing/onlining/offlining memory or adding/removing
heterogeneous/device memory, we should always hold the mem_hotplug_lock
in write mode to serialise memory hotplug (e.g. access to global/zone
variables).
mhp_(de)init_memmap_on_memory() functions can change zone stats and
struct page content, but they are currently called w/o the
mem_hotplug_lock.
When memory block is being offlined and when kmemleak goes through each
populated zone, the following theoretical race conditions could occur:
CPU 0: | CPU 1:
memory_offline() |
-> offline_pages() |
-> mem_hotplug_begin() |
... |
-> mem_hotplug_done() |
| kmemleak_scan()
| -> get_online_mems()
| ...
-> mhp_deinit_memmap_on_memory() |
[not protected by mem_hotplug_begin/done()]|
Marks memory section as offline, | Retrieves zone_start_pfn
poisons vmemmap struct pages and updates | and struct page members.
the zone related data |
| ...
| -> put_online_mems()
Fix this by ensuring mem_hotplug_lock is taken before performing
mhp_init_memmap_on_memory(). Also ensure that
mhp_deinit_memmap_on_memory() holds the lock.
online/offline_pages() are currently only called from
memory_block_online/offline(), so it is safe to move the locking there.
Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com
Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
My company email address is going to be disabled so let's create a mapping
that links to my private/community email just in case people might still
try to reach me via the old one.
Link: https://lkml.kernel.org/r/20231117022807.29461-1-clin@suse.com
Signed-off-by: Chester Lin <clin@suse.com>
Cc: Chester Lin <chester62515@gmail.com>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzbot reports oops in lockdep's __lock_acquire(), called from
__pte_offset_map_lock() called from filemap_map_pages(); or when I run the
repro, the oops comes in pmd_install(), called from filemap_map_pmd()
called from filemap_map_pages(), just before the __pte_offset_map_lock().
The problem is that filemap_map_pmd() has been assuming that when it finds
pmd_none(), a page table has already been prepared in prealloc_pte; and
indeed do_fault_around() has been careful to preallocate one there, when
it finds pmd_none(): but what if *pmd became none in between?
My 6.6 mods in mm/khugepaged.c, avoiding mmap_lock for write, have made it
easy for *pmd to be cleared while servicing a page fault; but even before
those, a huge *pmd might be zapped while a fault is serviced.
The difference in symptomatic stack traces comes from the "memory model"
in use: pmd_install() uses pmd_populate() uses page_to_pfn(): in some
models that is strict, and will oops on the NULL prealloc_pte; in other
models, it will construct a bogus value to be populated into *pmd, then
__pte_offset_map_lock() oops when trying to access split ptlock pointer
(or some other symptom in normal case of ptlock embedded not pointer).
Link: https://lore.kernel.org/linux-mm/20231115065506.19780-1-jose.pekkarinen@foxhound.fi/
Link: https://lkml.kernel.org/r/6ed0c50c-78ef-0719-b3c5-60c0c010431c@google.com
Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-and-tested-by: syzbot+89edd67979b52675ddec@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/0000000000005e44550608a0806c@google.com/
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>,
Cc: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org> [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the length passed in is 0, the pagemap_scan_test_walk() caller should
bail. This error causes at least a WARN_ON().
Link: https://lkml.kernel.org/r/20231116031352.40853-1-lizhi.xu@windriver.com
Reported-by: syzbot+32d3767580a1ea339a81@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000000526f2060a30a085@google.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__FILE__ is not guaranteed to exist in current dir. Replace that with
argv[0] for memory map test.
Link: https://lkml.kernel.org/r/20231116201547.536857-4-peterx@redhat.com
Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The new pagemap ioctl contains a fast path for wr-protections without
looking into category masks. It forgets to check PM_SCAN_WP_MATCHING
before applying the wr-protections. It can cause, e.g., pte markers
installed on archs that do not even support uffd wr-protect.
WARNING: CPU: 0 PID: 5059 at mm/memory.c:1520 zap_pte_range mm/memory.c:1520 [inline]
Link: https://lkml.kernel.org/r/20231116201547.536857-3-peterx@redhat.com
Fixes: 12f6b01a0bcb ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: syzbot+7ca4b2719dc742b8d0a4@syzkaller.appspotmail.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/pagemap: A few fixes to the recent PAGEMAP_SCAN".
This series should fix two known reports from syzbot on the new
PAGEMAP_SCAN ioctl():
https://lore.kernel.org/all/000000000000b0e576060a30ee3b@google.com/
https://lore.kernel.org/all/000000000000773fa7060a31e2cc@google.com/
The 3rd patch is something I found when testing these patches.
This patch (of 3):
The new ioctl(PAGEMAP_SCAN) relies on vma wr-protect capability provided
by userfault, however in the vma test it didn't explicitly require the vma
to have wr-protect function enabled, even if PM_SCAN_WP_MATCHING flag is
set.
It means the pagemap code can now apply uffd-wp bit to a page in the vma
even if not registered to userfaultfd at all.
Then in whatever way as long as the pte got written and page fault
resolved, we'll apply the write bit even if uffd-wp bit is set. We'll see
a pte that has both UFFD_WP and WRITE bit set. Anything later that looks
up the pte for uffd-wp bit will trigger the warning:
WARNING: CPU: 1 PID: 5071 at arch/x86/include/asm/pgtable.h:403 pte_uffd_wp arch/x86/include/asm/pgtable.h:403 [inline]
Fix it by doing proper check over the vma attributes when
PM_SCAN_WP_MATCHING is specified.
Link: https://lkml.kernel.org/r/20231116201547.536857-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20231116201547.536857-2-peterx@redhat.com
Fixes: 52526ca7fdb9 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: syzbot+e94c5aaf7890901ebf9b@syzkaller.appspotmail.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Erhard reported that the 6.7-rc1 kernel panics on boot if being
built with clang-16. The problem was not reproducible with gcc.
[ 5.975049] general protection fault, probably for non-canonical address 0xf555515555555557: 0000 [#1] SMP KASAN PTI
[ 5.976422] KASAN: maybe wild-memory-access in range [0xaaaaaaaaaaaaaab8-0xaaaaaaaaaaaaaabf]
[ 5.977475] CPU: 3 PID: 1 Comm: systemd Not tainted 6.7.0-rc1-Zen3 #77
[ 5.977860] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 5.977860] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5
[ 5.977860] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3
[ 5.977860] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02
[ 5.977860] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08
[ 5.977860] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa
[ 5.977860] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000
[ 5.977860] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18
[ 5.977860] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba
[ 5.977860] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000
[ 5.977860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5.977860] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0
[ 5.977860] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5.977860] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5.977860] Call Trace:
[ 5.977860] <TASK>
[ 5.977860] ? __die_body+0x16/0x75
[ 5.977860] ? die_addr+0x4a/0x70
[ 5.977860] ? exc_general_protection+0x1c9/0x2d0
[ 5.977860] ? cgroup_mkdir+0x455/0x9fb
[ 5.977860] ? __x64_sys_mkdir+0x69/0x80
[ 5.977860] ? asm_exc_general_protection+0x26/0x30
[ 5.977860] ? obj_cgroup_charge_pages+0x27/0x2d5
[ 5.977860] obj_cgroup_charge+0x114/0x1ab
[ 5.977860] pcpu_alloc+0x1a6/0xa65
[ 5.977860] ? mem_cgroup_css_alloc+0x1eb/0x1140
[ 5.977860] ? cgroup_apply_control_enable+0x26b/0x7c0
[ 5.977860] mem_cgroup_css_alloc+0x23f/0x1140
[ 5.977860] cgroup_apply_control_enable+0x26b/0x7c0
[ 5.977860] ? cgroup_kn_set_ugid+0x2d/0x1a0
[ 5.977860] cgroup_mkdir+0x455/0x9fb
[ 5.977860] ? __cfi_cgroup_mkdir+0x10/0x10
[ 5.977860] kernfs_iop_mkdir+0x130/0x170
[ 5.977860] vfs_mkdir+0x405/0x530
[ 5.977860] do_mkdirat+0x188/0x1f0
[ 5.977860] __x64_sys_mkdir+0x69/0x80
[ 5.977860] do_syscall_64+0x7d/0x100
[ 5.977860] ? do_syscall_64+0x89/0x100
[ 5.977860] ? do_syscall_64+0x89/0x100
[ 5.977860] ? do_syscall_64+0x89/0x100
[ 5.977860] ? do_syscall_64+0x89/0x100
[ 5.977860] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 5.977860] RIP: 0033:0x7f297671defb
[ 5.977860] Code: 8b 05 39 7f 0d 00 bb ff ff ff ff 64 c7 00 16 00 00 00 e9 61 ff ff ff e8 23 0c 02 00 0f 1f 00 f3 0f 1e fa b88
[ 5.977860] RSP: 002b:00007ffee6242bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000053
[ 5.977860] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297671defb
[ 5.977860] RDX: 0000000000000000 RSI: 00000000000001ed RDI: 000055c6b449f0e0
[ 5.977860] RBP: 00007ffee6242bf0 R08: 000000000000000e R09: 0000000000000000
[ 5.977860] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c6b445db80
[ 5.977860] R13: 00000000000003a0 R14: 00007f2976a68651 R15: 00000000000003a0
[ 5.977860] </TASK>
[ 5.977860] Modules linked in:
[ 6.014095] ---[ end trace 0000000000000000 ]---
[ 6.014701] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5
[ 6.015348] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3
[ 6.017575] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02
[ 6.018255] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08
[ 6.019120] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa
[ 6.019983] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000
[ 6.020849] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18
[ 6.021747] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba
[ 6.022609] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000
[ 6.023593] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.024296] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0
[ 6.025279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6.026139] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6.027000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Actually the problem is caused by uninitialized local variable in
current_obj_cgroup(). If the root memory cgroup is set as an active
memory cgroup for a charging scope (as in the trace, where systemd tries
to create the first non-root cgroup, so the parent cgroup is the root
cgroup), the "for" loop is skipped and uninitialized objcg is returned,
causing a panic down the accounting stack.
The fix is trivial: initialize the objcg variable to NULL unconditionally
before the "for" loop.
[vbabka@suse.cz: remove redundant assignment]
Link: https://lkml.kernel.org/r/4bd106d5-c3e3-6731-9a74-cff81e2392de@suse.cz
Link: https://lkml.kernel.org/r/20231116025109.3775055-1-roman.gushchin@linux.dev
Fixes: e86828e5446d ("mm: kmem: scoped objcg protection")
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1959
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
set_track_prepare() will call __alloc_pages() which attempts to acquire
zone->lock(spinlocks), so move it outside object->lock(raw_spinlocks)
because it's not right to acquire spinlocks while holding raw_spinlocks in
RT mode.
Link: https://lkml.kernel.org/r/20231115082138.2649870-3-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix invalid wait context of set_track_prepare()".
Geert reported an invalid wait context[1] which is resulted by moving
set_track_prepare() inside kmemleak_lock. This is not allowed because in
RT mode, the spinlocks can be preempted but raw_spinlocks can not, so it
is not allowd to acquire spinlocks while holding raw_spinlocks. The
second patch fix same problem in kmemleak_update_trace().
This patch (of 2):
Move the initialisation of object back to__alloc_object() because
set_track_prepare() attempt to acquire zone->lock(spinlocks) while
__link_object is holding kmemleak_lock(raw_spinlocks). This is not right
for RT mode.
This reverts commit 245245c2fffd00 ("mm/kmemleak: move the initialisation
of object to __link_object").
Link: https://lkml.kernel.org/r/20231115082138.2649870-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20231115082138.2649870-2-liushixin2@huawei.com
Fixes: 245245c2fffd ("mm/kmemleak: move the initialisation of object to __link_object")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/linux-mm/CAMuHMdWj0UzwNaxUvcocTfh481qRJpOWwXxsJCTJfu1oCqvgdA@mail.gmail.com/ [1]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We have a report of this WARN() triggering. Let's print the offending
swp_entry_t to help diagnosis.
Link: https://lkml.kernel.org/r/000000000000b0e576060a30ee3b@google.com
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The routine __vma_private_lock tests for the existence of a reserve map
associated with a private hugetlb mapping. A pointer to the reserve map
is in vma->vm_private_data. __vma_private_lock was checking the pointer
for NULL. However, it is possible that the low bits of the pointer could
be used as flags. In such instances, vm_private_data is not NULL and not
a valid pointer. This results in the null-ptr-deref reported by syzbot:
general protection fault, probably for non-canonical address 0xdffffc000000001d:
0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
CPU: 0 PID: 5048 Comm: syz-executor139 Not tainted 6.6.0-rc7-syzkaller-00142-g88
8cf78c29e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 1
0/09/2023
RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5004
...
Call Trace:
<TASK>
lock_acquire kernel/locking/lockdep.c:5753 [inline]
lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5718
down_write+0x93/0x200 kernel/locking/rwsem.c:1573
hugetlb_vma_lock_write mm/hugetlb.c:300 [inline]
hugetlb_vma_lock_write+0xae/0x100 mm/hugetlb.c:291
__hugetlb_zap_begin+0x1e9/0x2b0 mm/hugetlb.c:5447
hugetlb_zap_begin include/linux/hugetlb.h:258 [inline]
unmap_vmas+0x2f4/0x470 mm/memory.c:1733
exit_mmap+0x1ad/0xa60 mm/mmap.c:3230
__mmput+0x12a/0x4d0 kernel/fork.c:1349
mmput+0x62/0x70 kernel/fork.c:1371
exit_mm kernel/exit.c:567 [inline]
do_exit+0x9ad/0x2a20 kernel/exit.c:861
__do_sys_exit kernel/exit.c:991 [inline]
__se_sys_exit kernel/exit.c:989 [inline]
__x64_sys_exit+0x42/0x50 kernel/exit.c:989
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Mask off low bit flags before checking for NULL pointer. In addition, the
reserve map only 'belongs' to the OWNER (parent in parent/child
relationships) so also check for the OWNER flag.
Link: https://lkml.kernel.org/r/20231114012033.259600-1-mike.kravetz@oracle.com
Reported-by: syzbot+6ada951e7c0f7bc8a71e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/00000000000078d1e00608d7878b@google.com/
Fixes: bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Edward Adam Davis <eadavis@qq.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add myself as the fallthough maintainer for material under lib/.
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
Pull smb client fixes from Steve French:
- Two fallocate fixes
- Fix warnings from new gcc
- Two symlink fixes
* tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client, common: fix fortify warnings
cifs: Fix FALLOC_FL_INSERT_RANGE by setting i_size after EOF moved
cifs: Fix FALLOC_FL_ZERO_RANGE by setting i_size if EOF moved
smb: client: report correct st_size for SMB and NFS symlinks
smb: client: fix missing mode bits for SMB symlinks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single patch to fix long-standing issue of memory leak at failure of
device registration for fw_unit. We rarely encounter the issue, but it
should be applied to stable releases, since it fixes inappropriate API
usage"
* tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix possible memory leak in create_units()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix corruption of f0/vs0 during FP/Vector save, seen as userspace
crashes when using io-uring workers (in particular with MariaDB)
- Fix KVM_RUN potentially clobbering all host userspace FP/Vector
registers
Thanks to Timothy Pearson, Jens Axboe, and Nicholas Piggin.
* tag 'powerpc-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers
powerpc: Don't clobber f0/vs0 during fp|altivec register save
|
|
Pull vfio fixes from Alex Williamson:
- Fix the lifecycle of a mutex in the pds variant driver such that a
reset prior to opening the device won't find it uninitialized.
Implement the release path to symmetrically destroy the mutex. Also
switch a different lock from spinlock to mutex as the code path has
the potential to sleep and doesn't need the spinlock context
otherwise (Brett Creeley)
- Fix an issue detected via randconfig where KVM tries to symbol_get an
undeclared function. The symbol is temporarily declared
unconditionally here, which resolves the problem and avoids churn
relative to a series pending for the next merge window which resolves
some of this symbol ugliness, but also fixes Kconfig dependencies
(Sean Christopherson)
* tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfio:
vfio: Drop vfio_file_iommu_group() stub to fudge around a KVM wart
vfio/pds: Fix possible sleep while in atomic context
vfio/pds: Fix mutex lock->magic != lock warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A fix for the Xen event driver setting the correct return value when
experiencing an allocation failure
- A fix for allocating space for a struct in the percpu area to not
cross page boundaries (this one is for x86, a similar one for Arm was
already in the pull request for rc3)
* tag 'for-linus-6.7a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: fix error code in xen_bind_pirq_msi_to_irq()
x86/xen: fix percpu vcpu_info allocation
|
