aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-05mmc: sdhci: Simplify tuning block size logicAdrian Hunter
There are only 2 possible block sizes, so simplify 2 if-statements into 1. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci: Factor out tuning helper functionsAdrian Hunter
Factor out some functions to tidy up the code in sdhci_execute_tuning. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci: Use mmc_abort_tuning()Adrian Hunter
Use mmc_abort_tuning() instead of open-coding the stop command. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: mmc: Introduce mmc_abort_tuning()Adrian Hunter
If a tuning command times out, the card could still be processing it, which will cause problems for recovery. The eMMC specification says that CMD12 can be used to stop CMD21, so add a function that does that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci: Always allow tuning to fall back to fixed samplingAdrian Hunter
SDHCI falls back to fixed sampling if there is an error during tuning. However it also reports an error unless there is periodic re-tuning. That is not the best option because: a) there is a reasonable chance that fixed sampling will work, especially at room temperature. b) re-tuning will be done again anyway if there are CRC errors. Change to return no error always when falling back to fixed sampling. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci: Fix tuning reset after exhausting the maximum number of loopsAdrian Hunter
If the driver has exhausted the maximum number of tuning loops, then fixed sampling is used. To do that both SDHCI_CTRL_TUNED_CLK and SDHCI_CTRL_EXEC_TUNING must be reset to 0, but only SDHCI_CTRL_TUNED_CLK was being reset. Reset SDHCI_CTRL_EXEC_TUNING to 0 also. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci: Fix recovery from tuning timeoutAdrian Hunter
Clearing the tuning bits should reset the tuning circuit. However there is more to do. Reset the command and data lines for good measure, and then for eMMC ensure the card is not still trying to process a tuning command by sending a stop command. Note the JEDEC eMMC specification says the stop command (CMD12) can be used to stop a tuning command (CMD21) whereas the SD specification is silent on the subject with respect to the SD tuning command (CMD19). Considering that CMD12 is not a valid SDIO command, the stop command is sent only when the tuning command is CMD21 i.e. for eMMC. That addresses cases seen so far which have been on eMMC. Note that this replaces the commit fe5fb2e3b58f ("mmc: sdhci: Reset cmd and data circuits after tuning failure") which is being reverted for v4.9+. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Dan O'Donovan <dan@emutex.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05Revert "mmc: sdhci: Reset cmd and data circuits after tuning failure"Adrian Hunter
This reverts commit fe5fb2e3b58f ("mmc: sdhci: Reset cmd and data circuits after tuning failure"). A better fix is available, and it will be applied to older stable releases, so get this out of the way by reverting it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: mmc: Relax checking for switch errors after HS200 switchAdrian Hunter
The JEDEC specification indicates CMD13 can be used after a HS200 switch to check for errors. However in practice some boards experience CRC errors in the CMD13 response. Consequently, for HS200, CRC errors are not a reliable way to know the switch failed. If there really is a problem, we would expect tuning will fail and the result ends up the same. So change the error condition to ignore CRC errors in that case. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci-acpi: support 80860F14 UID 2 SDIO busDaniel Drake
Add an entry for the SDIO bus in the ECS EF20 cherry trail laptop: Device (SDHB) { Name (_ADR, 0x00110000) Name (_HID, "80860F14" /* Intel Baytrail SDIO/MMC Host Controller */) Name (_CID, "PNP0D40" /* SDA Standard Compliant SD Host Controller */) Name (_DDN, "Intel(R) SDIO Controller - 80862295") Name (_UID, 0x02) Name (_HRV, One) A SDHB device with the same _HID and _UID can also be found on other cherry trail products like Chuwi Hi10. Signed-off-by: Daniel Drake <drake@endlessm.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci-of-at91: remove bogus MMC_SDHCI_IO_ACCESSORS selectMasahiro Yamada
I see no override of read/write callbacks in sdhci-of-at91.c. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci-pci: Use ACPI to get max frequency for Intel NI byt sdioZach Brown
On NI 9037 boards the max SDIO frequency is limited by trace lengths and other layout choices. The max SDIO frequency is stored in an ACPI table. The driver reads the ACPI entry MXFQ during sdio_probe_slot and sets the f_max field of the host. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Reviewed-by: Jaeden Amero <jaeden.amero@ni.com> Reviewed-by: Josh Cartwright <joshc@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci-pci: Add PCI ID for Intel NI byt sdioZach Brown
Add PCI ID for Intel byt sdio host controller sub-vended by NI. The controller has different behavior because of the board layout NI puts it on. Signed-off-by: Zach Brown <zach.brown@ni.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdhci-s3c: add spin_unlock_irq() before calling clk_round_rateJaehoon Chung
Before calling clk_round_rate(), put the spin_unlock_irq() in sdhci_s3c_consider_clock() function. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: dw_mmc: display the clock message only one time when card is pollingJaehoon Chung
When card is polling (broken-cd), there is a spamming messge related to clock. After applied this patch, display the message only one time at boot time. It's enough to check which clock values is used. Also prevent to display the spamming message. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: dw_mmc: add the debug message for polling and non-removableJaehoon Chung
If card is polling or non-removable, display the more exact message. It's helpful to debug which detecting scheme is using. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: dw_mmc: check the "present" variable before checking flagsJaehoon Chung
Before checking flags, it has to check "present" variable. Otherwise, flags should be cleared everytime. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: dw_mmc: add missing codes for runtime resumeJoonyoung Shim
The commit 64997de4fd17 ("mmc: dw_mmc: remove system PM callback") is missing to call dw_mci_ctrl_reset(). This adds to call dw_mci_ctrl_reset() and to handle error of clocks. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: dw_mmc: exynos: fix to call suspend callbackJoonyoung Shim
The dw_mmc-exynos should be RPM_ACTIVE on probe() to call suspend callback of runtime PM in pm_runtime_force_suspend() during first system suspend. Also call pm_runtime_get_noresume() on probe() because it doesn't call suspend/resume callback by runtime PM now. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: mmc_test: remove BUG_ONs and deploy error handlingShawn Lin
It is unnecessary to panic the kernel when testing mmc. Instead, cast a warning for folkz to debug and return the error code to the caller to indicate the failure of this test should be enough. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: queue: remove BUG_ON for bounce_sgShawn Lin
bounce_sg for mqrq_cur and mqrq_pre are proper allocated when initializing the queue and will not be freed before explicitly cleaning the queue. So from the code itself it should be quite confident to remove this check. If that BUG_ON take effects, it is mostly likely the memory is randomly oopsing. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: sdio_uart: remove meaningless BUG_ONShawn Lin
The code seems quite simple to maintain the sdio_uart_table, and the insert/remove port from the table are symmetric. If the BUG_ON occurs, which means serial_core modify the index or mess up the port sequence anyway. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: core: remove BUG_ONs from core.cShawn Lin
BUG_ONs doesn't help anything except for stop the system from running. If it occurs, it implies we should deploy proper error handling for that. So this patch is gonna discard these meaningless BUG_ONs and deploy error handling if needed. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: core: remove BUG_ONs from sdShawn Lin
BUG_ONs doesn't help anything except for stop the system from running. If it occurs, it implies we should deploy proper error handling for that. So this patch is gonna discard these meaningless BUG_ONs and deploy error handling if needed. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: core: remove BUG_ONs from mmcShawn Lin
BUG_ONs doesn't help anything except for stop the system from running. If it occurs, it implies we should deploy proper error handling for that. So this patch is gonna discard these meaningless BUG_ONs and deploy error handling if needed. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: debugfs: remove BUG_ON from mmc_ext_csd_openShawn Lin
Return error value for file_operations callback instead of triggering BUG_ON which is meaningless. Personally I don't believe n != EXT_CSD_STR_LEN could happen. Anyway, propagate the error to the caller. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: core: remove BUG_ONs from sdioShawn Lin
BUG_ONs doesn't help anything except for stop the system from running. If it occurs, it implies we should deploy proper error handling for that. So this patch is gonna discard these meaningless BUG_ONs and deploy error handling if needed. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: mmc: Add Command Queue definitionsAdrian Hunter
Add definitions relating to Command Queuing. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: queue: Introduce queue depth and use it to allocate and freeAdrian Hunter
Add a mmc_queue member to record the size of the queue, which currently supports 2 requests on-the-go at a time. Instead of allocating resources for 2 slots in the queue, allow for an arbitrary number. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: queue: Factor out mmc_queue_reqs_free_bufs()Adrian Hunter
In preparation for supporting a queue of requests, factor out mmc_queue_reqs_free_bufs(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: queue: Factor out mmc_queue_alloc_sgs()Adrian Hunter
In preparation for supporting a queue of requests, factor out mmc_queue_alloc_sgs(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: queue: Factor out mmc_queue_alloc_bounce_sgs()Adrian Hunter
In preparation for supporting a queue of requests, factor out mmc_queue_alloc_bounce_sgs(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org> [Ulf: Fixed compiler warning] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: queue: Factor out mmc_queue_alloc_bounce_bufs()Adrian Hunter
In preparation for supporting a queue of requests, factor out mmc_queue_alloc_bounce_bufs(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org> [Ulf: Fixed compiler warning] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: queue: Fix queue thread wake-upAdrian Hunter
The only time the driver sleeps expecting to be woken upon the arrival of a new request, is when the dispatch queue is empty. The only time that it is known whether the dispatch queue is empty is after NULL is returned from blk_fetch_request() while under the queue lock. Recognizing those facts, simplify the synchronization between the queue thread and the request function. A couple of flags tell the request function what to do, and the queue lock and barriers associated with wake-ups ensure synchronization. The result is simpler and allows the removal of the context_info lock. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Harjani Ritesh <riteshh@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: block: Fix 4K native sector checkAdrian Hunter
The 4K native sector check does not allow for the 'do' loop nor the variables used after the 'cmd_abort' label. 'brq' and 'req' get reassigned in the 'do' loop, so the check must not assume what their values are. After the 'cmd_abort' label, 'mq_rq' and 'req' are used, but 'rqc' must be NULL otherwise it can be started again. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-05mmc: block: Restore line inadvertently removed with packed commandsAdrian Hunter
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-29soc: fsl: fix section mismatch build warningsSudeep Holla
We get the following warning with the driver is compiled in: WARNING: modpost: Found 1 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' With CONFIG_DEBUG_SECTION_MISMATCH enabled, the details are reported: WARNING: vmlinux.o(.text+0x55d014): Section mismatch in reference from the function fsl_guts_probe() to the function .init.text:of_flat_dt_get_machine_name() The function fsl_guts_probe() references the function __init of_flat_dt_get_machine_name(). This is often because fsl_guts_probe lacks a __init annotation or the annotation of of_flat_dt_get_machine_name is wrong. This patch fixes the issue by using the normal DT/OF API rather than the of_flat_* one. Cc: Scott Wood <oss@buserror.net> Cc: Yangbo Lu <yangbo.lu@nxp.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0yangbo lu
The eSDHC of T4240-R1.0-R2.0 has incorrect vender version and spec version. Acturally the right version numbers should be VVN=0x13 and SVN = 0x1. This patch adds the GUTS driver support for eSDHC driver to match SoC. And fix host version to avoid that incorrect version numbers break down the ADMA data transfer. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Scott Wood <oss@buserror.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29MAINTAINERS: add entry for Freescale SoC driversyangbo lu
Add maintainer entry for Freescale SoC drivers including the QE library and the GUTS driver now. Also add maintainer for QE library. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Acked-by: Qiang Zhao <qiang.zhao@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29soc: fsl: add GUTS driver for QorIQ platformsyangbo lu
The global utilities block controls power management, I/O device enabling, power-onreset(POR) configuration monitoring, alternate function selection for multiplexed signals,and clock control. This patch adds a driver to manage and access global utilities block. Initially only reading SVR and registering soc device are supported. Other guts accesses, such as reading RCW, should eventually be moved into this driver as well. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29dt: bindings: move guts devicetree doc out of powerpc directoryyangbo lu
Move guts devicetree doc to Documentation/devicetree/bindings/soc/fsl/ since it's used by not only PowerPC but also ARM. And add a specification for 'little-endian' property. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Scott Wood <oss@buserror.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29ARM64: dts: ls2080a: add device configuration nodeyangbo lu
Add the dts node for device configuration unit that provides general purpose configuration and status for the device. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29Merge tag 'soc-device-match-tag1' into nextUlf Hansson
Merge the immutable soc-device-match-tag1 provided by Geert Uytterhoeven to pull in the new soc_device_match() interface for matching against soc_bus attributes.
2016-11-29mmc: sh_mmcif: Document r8a73a4, r8a7778 and sh73a0 DT bindingsSimon Horman
Simply document new compatibility strings as the driver is already activated using a fallback compatibility string. These compat strings are in keeping with those for all other Renesas ARM based SoCs with sh_mmcif enabled in mainline. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: sh_mobile_sdhi: remove support for sh7372Simon Horman
Remove documentation of support for the SH7372 (SH-Mobile AP4) from the MMC driver. The driver itself appears to have no SH7372 specific code. Commit edf4100906044225 ("ARM: shmobile: sh7372 dtsi: Remove Legacy file") removes this SoC from the kernel in v4.1. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: block: delete packed command supportLinus Walleij
I've had it with this code now. The packed command support is a complex hurdle in the MMC/SD block layer, around 500+ lines of code which was introduced in 2013 in commit ce39f9d17c14 ("mmc: support packed write command for eMMC4.5 devices") commit abd9ac144947 ("mmc: add packed command feature of eMMC4.5") ...and since then it has been rotting. The original author of the code has disappeared from the community and the mail address is bouncing. For the code to be exercised the host must flag that it supports packed commands, so in mmc_blk_prep_packed_list() which is called for every single request, the following construction appears: u8 max_packed_rw = 0; if ((rq_data_dir(cur) == WRITE) && mmc_host_packed_wr(card->host)) max_packed_rw = card->ext_csd.max_packed_writes; if (max_packed_rw == 0) goto no_packed; This has the following logical deductions: - Only WRITE commands can really be packed, so the solution is only half-done: we support packed WRITE but not packed READ. The packed command support has not been finalized by supporting reads in three years! - mmc_host_packed_wr() is just a static inline that checks host->caps2 & MMC_CAP2_PACKED_WR. The problem with this is that NO upstream host sets this capability flag! No driver in the kernel is using it, and we can't test it. Packed command may be supported in out-of-tree code, but I doubt it. I doubt that the code is even working anymore due to other refactorings in the MMC block layer, who would notice if patches affecting it broke packed commands? No one. - There is no Device Tree binding or code to mark a host as supporting packed read or write commands, just this flag in caps2, so for sure there are not any DT systems using it either. It has other problems as well: mmc_blk_prep_packed_list() is speculatively picking requests out of the request queue with blk_fetch_request() making the MMC/SD stack harder to convert to the multiqueue block layer. By this we get rid of an obstacle. The way I see it this is just cruft littering the MMC/SD stack. Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Maya Erez <qca_merez@qca.qualcomm.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: delete is_first_req parameter from pre-request callbackLinus Walleij
The void (*pre_req) callback in the struct mmc_host_ops vtable is passing an argument "is_first_req" indicating whether this is the first request or not. None of the in-kernel users use this parameter: instead, since they all just do variants of dma_map* they use the DMA cookie to indicate whether a pre* callback has already been done for a request when they decide how to handle it. Delete the parameter from the callback and all users, as it is just pointless cruft. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: core: Update CMD13 polling policy when switch to HS DDR modeUlf Hansson
According to the JEDEC specification, during bus timing change operations for mmc, sending a CMD13 could trigger CRC errors. As switching to HS DDR mode indeed causes a bus timing change, polling with CMD13 to detect card busy, may thus potentially trigger CRC errors. Currently these errors are treated as the switch to HS DDR mode failed. To improve this behaviour, let's instead tell __mmc_switch() to retry when it encounters CRC errors during polling. Moreover, when switching to HS DDR mode, let's make sure the CMD13 polling is done by having the mmc host and the mmc card, being configured to operate at the same selected bus speed timing. Fix this by providing MMC_TIMING_MMC_DDR52 as the timing parameter to __mmc_switch(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
2016-11-29mmc: core: Allow CMD13 polling when switching to HS mode for mmcUlf Hansson
In cases when the mmc host doesn't support HW busy detection, polling for a card being busy by using CMD13 is beneficial. That is because, instead of waiting a fixed amount of time, 500ms or the generic CMD6 time from EXT_CSD, we find out a lot sooner when the card stops signaling busy. This leads to a significant decreased total initialization time for the mmc card. However, to allow polling with CMD13 during a bus timing change operation, such as switching to HS mode, we first need to update the mmc host's bus timing before starting to poll. Deal with that, simply by providing MMC_TIMING_MMC_HS as the timing parameter to __mmc_switch() from mmc_select_hs(). By telling __mmc_switch() to allow polling with CMD13, also makes it validate the CMD6 status, thus we can remove the corresponding checks. When switching to HS400ES, the mmc_select_hs() function is called in one of the intermediate steps. To still prevent CMD13 polling for HS400ES, let's call the __mmc_switch() function in this path as it enables us to keep using the existing method. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
2016-11-29mmc: core: Enable __mmc_switch() to change bus speed timing for the hostUlf Hansson
In cases when a speed mode change is requested for mmc cards, a CMD6 is sent by calling __mmc_switch() during the card initialization. The CMD6 leads to the card entering a busy period. When that is completed, the host must parse the CMD6 status to find out whether the change of the speed mode succeeded. To enable the mmc core to poll the card by using CMD13 to find out when the busy period is completed, it's reasonable to make sure polling is done by having the mmc host and the mmc card, being configured to operate at the same selected bus speed timing. Therefore, let's extend __mmc_switch() to take yet another parameter, which allow its callers to update the bus speed timing of the mmc host. In this way, __mmc_switch() also becomes capable of reading and validating the CMD6 status by sending a CMD13, in cases when that's desired. If __mmc_switch() encounters a failure, we make sure to restores the old bus speed timing for the mmc host, before propagating the error code. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 05:12:18 +0000