aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-04-18IB/ipath: Fix QP error completion queue entriesRalph Campbell
When switching to the QP error state, the completion queue entries (error or flush) were not being generated correctly. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/ipath: Fix up some debug messagesBryan O'Sullivan
ipath_dbg doesn't need the same prefixes that printk does. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/ipath: Support larger IB_QP_MAX_DEST_RD_ATOMIC and IB_QP_MAX_QP_RD_ATOMICRalph Campbell
This patch adds support for multiple RDMA reads and atomics to be sent before an ACK is required to be seen by the requester. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/ipath: NMI cpu lockup if local loopback usedRalph Campbell
If a post send is done in loopback and there is no receive queue entry, the sending QP is put on a timeout list for a while so the receiver has a chance to post a receive buffer. If the another post send is done, the code incorrectly tried to put the QP on the timeout list again an corrupted the timeout list. This eventually leads to a spin lock deadlock NMI due to the timer function looping forever with the lock held. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/ipath: Fix SRQ limit event causing dropped CQ entryRalph Campbell
A silly programming error causes a CQ entry to not be generated if a SRQ limit event is generated. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/ipath: Don't initialize port memory for subportsRalph Campbell
A recent change was made to allocate memory for a port after CPU affinity is set. That change didn't account for subports and was trying to allocate memory for the port twice. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/ipath: Definitions of two RXE parity err bits were reversedBryan O'Sullivan
The chip documentation on the expected TID vs eager TID parity error bits was reversed from what was implemented in the RTL, for both chips. This corrects the definitions. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/ipath: Fix user memory region creation when IOMMU presentBryan O'Sullivan
The loop which initializes the user memory region from an array of pages was using the wrong limit for the array. This worked OK when dma_map_sg() returned the same number as the number of pages. This patch fixes the problem. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/ipath: Add ability to set and clear IB local loopbackBryan O'Sullivan
This is a sticky state. It is useful for diagnosing problems with boards versus cable/switch problems. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IPoIB: Remove pointless opcode field from debugging outputRoland Dreier
There's no point in printing the opcode field in the completion handling debugging output, since the type of completion is already printed at the beginning of the line. In fact the opcode field is not even defined for completions with a status other than success. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/umad: Fix declaration of dev_map[]Hal Rosenstock
The current ib_umad code never accesses bits past IB_UMAD_MAX_PORTS in dev_map[]. We shouldn't declare it to be twice as big. Pointed-out-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Hal Rosenstock <halr@voltaire.com>
2007-04-18IB: Remove reference to obsolete CONFIG_IPATH_CORERoland Dreier
Since commit b1c1b6a3 ("IB/ipath: merge ipath_core and ib_ipath drivers"), CONFIG_IPATH_CORE no longer exists, so there's no reason to have a line for it in drivers/Makefile. Pointed out by Robert P. J. Day <rpjday@mindspring.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-17Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BRIDGE]: Unaligned access when comparing ethernet addresses [SCTP]: Unmap v4mapped addresses during SCTP_BINDX_REM_ADDR operation. [SCTP]: Fix assertion (!atomic_read(&sk->sk_rmem_alloc)) failed message [NET]: Set a separate lockdep class for neighbour table's proxy_queue [NET]: Fix UDP checksum issue in net poll mode. [KEY]: Fix conversion between IPSEC_MODE_xxx and XFRM_MODE_xxx. [NET]: Get rid of alloc_skb_from_cache
2007-04-17Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Fix data corruption after FMR unmap on Sinai
2007-04-17Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86: Fix potential overflow in perfctr reservation [PATCH] x86: Fix gcc 4.2 _proxy_pda workaround
2007-04-17Minor bug fixes to i2c-pasemiOlof Johansson
* Last write during i2c_xfer is of the wrong byte (off-by-1). * Read length is wrong for some of the reads (mistakenly used the PEC version) Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17i2c-pasemi: Depend on PPC_PASEMI againJean Delvare
Looks like a local change I made to be able to test-compile the i2c-pasemi driver leaked upstream. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17hwmon/w83627ehf: Fix the fan5 clock divider writeJean Delvare
Users have been complaining about the w83627ehf driver flooding their logs with debug messages like: w83627ehf 9191-0a10: Increasing fan 4 clock divider from 64 to 128 or: w83627ehf 9191-0290: Increasing fan 4 clock divider from 4 to 8 The reason is that we failed to actually write the LSB of the encoded clock divider value for that fan, causing the next read to report the same old value again and again. Additionally, the fan number was improperly reported, making the bug harder to find. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17Provide dummy devm_ioport_* if !HAS_IOPORTRussell King
Provide an dummy implementation of devm_ioport_map() and devm_ioport_unmap() to allow drivers (eg, pata_platform) to build for platforms where CONFIG_NO_IOPORT is selected. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17knfsd: use a spinlock to protect sk_info_authunixNeilBrown
sk_info_authunix is not being protected properly so the object that it points to can be cache_put twice, leading to corruption. We borrow svsk->sk_defer_lock to provide the protection. We should probably rename that lock to have a more generic name - later. Thanks to Gabriel for reporting this. Cc: Greg Banks <gnb@melbourne.sgi.com> Cc: Gabriel Barazer <gabriel@oxeva.fr> Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17drivers/macintosh/smu.c: fix locking snafuAndrew Morton
It got its lock and unlock backwards. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=8334 (obviously, this code could be using plain old spin_lock_irq(), too) Cc: <matthias.kaehlcke@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17ufs proper handling of zero link caseEvgeniy Dushistov
This patch should fix or partly fix this bug: http://bugzilla.kernel.org/show_bug.cgi?id=8276 The problem is: - if we see "zero link case" during reading inode operation, we call ufs_error(which remount fs readonly), but not "mark" inode as bad (1) - in readonly case we do not fill some data structures, which are used in read and write case (2) - VFS call ufs_delete_inode if link count is zero (3) so (1)->(3)->(2) cause oops, this patch should fix such scenario Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Cc: Jim Paris <jim@jtan.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17spi: fix use of set_cs in spi_s3c24xx driverBen Dooks
It turns out that the last patch to change set_cs to be kept in the controller's structure instead of the platform data was an incomplete change, and did not change the references to platfrom data in the setup xfer code. (This can prevent an oops.) Reported-by: <Ling.Alex@iac.com.tw> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17alpha: build fixes - force architectureIvan Kokshaysky
Override compiler .arch directive for generic kernel build. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17alpha: more fixes for specific machine typesIvan Kokshaysky
arch/alpha/kernel/sys_sx164.c Earlier firmware revisions need MVI fix as well. arch/alpha/kernel/sys_nautilus.c On UP1500 firmware reports wrong AGP IRQ (10 instead of 5). This causes interrupt storm if there is a PCI device that uses IRQ 5. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17alpha: fixes for specific machine typesIvan Kokshaysky
Files: arch/alpha/kernel/core_mcpcia.c arch/alpha/kernel/sys_rawhide.c include/asm-alpha/core_mcpcia.h Determine correct hose configuration; RAWHIDE family can have 2 or 4 hoses, so make sure non-existent hoses are ignored. arch/alpha/kernel/err_titan.c Supply a needed #include <asm/irq_regs.h> arch/alpha/kernel/module.c Add some useful output to the relocation overflow messages. arch/alpha/kernel/sys_noritake.c Supply necessary noritake_end_irq() to correct interrupt handling. This fixes a problem first noted by hangs during boot probing with a DE500-BA TULIP NIC present. arch/alpha/kernel/sys_sio.c Correct saving of original PIRQ register (PCI IRQ routing); change default PIRQ setting to leave PCI IRQs 9 and 14 free to be used for sound (Multia) and IDE (any), respectively. include/asm-alpha/io.h Supply the "isa_virt_to_bus" routine. Signed-off-by: Jay Estabrook <jay.estabrook@hp.com> Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17fix bogon in /dev/mem mmap'ing on nommuBenjamin Herrenschmidt
While digging through my MAP_FIXED changes, I found that rather obvious bug in /dev/mem mmap implementation for nommu archs. get_unmapped_area() is expected to return an address, not a pfn. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-By: David Howells <dhowells@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17kernel-doc: fix plist.h commentsRandy Dunlap
Make kernel-doc comments match macro names. Correct parameter names in a few places. Remove '#' from beginning of kernel-doc comment macro names. Remove extra (erroneous) blank lines in kernel-doc. Warning(plist.h:100): Cannot understand * #PLIST_HEAD_INIT - static struct plist_head initializer on line 100 - I thought it was a doc line Warning(plist.h:112): Cannot understand * #PLIST_NODE_INIT - static struct plist_node initializer on line 112 - I thought it was a doc line Warning(plist.h:103): No description found for parameter '_lock' Warning(plist.h:129): No description found for parameter 'lock' Warning(plist.h:158): No description found for parameter 'pos' Warning(plist.h:169): No description found for parameter 'pos' Warning(plist.h:169): No description found for parameter 'n' Warning(plist.h:179): No description found for parameter 'mem' This still leaves one warning & one error that need attention: Error(plist.h:219): cannot understand prototype: '(' Warning(plist.h): no structured comments found Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: Daniel Walker <dwalker@mvista.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17exec.c: fix coredump to pipe problem and obscure "security hole"Alan Cox
The patch checks for "|" in the pattern not the output and doesn't nail a pid on to a piped name (as it is a program name not a file) Also fixes a very very obscure security corner case. If you happen to have decided on a core pattern that starts with the program name then the user can run a program called "|myevilhack" as it stands. I doubt anyone does this. Signed-off-by: Alan Cox <alan@redhat.com> Confirmed-by: Christopher S. Aker <caker@theshore.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17allow vmsplice to work in 32-bit mode on ppc64Don Zickus
Trivial change to pass vmsplice arguments through the compat layer on pp64. Signed-off-by: Don Zickus <dzickus@redhat.com> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17[BRIDGE]: Unaligned access when comparing ethernet addressesEvgeny Kravtsunov
compare_ether_addr() implicitly requires that the addresses passed are 2-bytes aligned in memory. This is not true for br_stp_change_bridge_id() and br_stp_recalculate_bridge_id() in which one of the addresses is unsigned char *, and thus may not be 2-bytes aligned. Signed-off-by: Evgeny Kravtsunov <emkravts@openvz.org> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Pavel Emelianov <xemul@openvz.org>
2007-04-17[SCTP]: Unmap v4mapped addresses during SCTP_BINDX_REM_ADDR operation.Paolo Galtieri
During the sctp_bindx() call to add additional addresses to the endpoint, any v4mapped addresses are converted and stored as regular v4 addresses. However, when trying to remove these addresses, the v4mapped addresses are not converted and the operation fails. This patch unmaps the addresses on during the remove operation as well. Signed-off-by: Paolo Galtieri <pgaltieri@mvista.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-17[SCTP]: Fix assertion (!atomic_read(&sk->sk_rmem_alloc)) failed messageTsutomu Fujii
In current implementation, LKSCTP does receive buffer accounting for data in sctp_receive_queue and pd_lobby. However, LKSCTP don't do accounting for data in frag_list when data is fragmented. In addition, LKSCTP doesn't do accounting for data in reasm and lobby queue in structure sctp_ulpq. When there are date in these queue, assertion failed message is printed in inet_sock_destruct because sk_rmem_alloc of oldsk does not become 0 when socket is destroyed. Signed-off-by: Tsutomu Fujii <t-fujii@nb.jp.nec.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-17[NET]: Set a separate lockdep class for neighbour table's proxy_queuePavel Emelianov
Otherwise the following calltrace will lead to a wrong lockdep warning: neigh_proxy_process() `- lock(neigh_table->proxy_queue.lock); arp_redo /* via tbl->proxy_redo */ arp_process neigh_event_ns neigh_update skb_queue_purge `- lock(neighbor->arp_queue.lock); This is not a deadlock actually, as neighbor table's proxy_queue and the neighbor's arp_queue are different queues. Lockdep thinks there is a deadlock as both queues are initialized with skb_queue_head_init() and thus have a common class. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-17[NET]: Fix UDP checksum issue in net poll mode.Aubrey.Li
In net poll mode, the current checksum function doesn't consider the kind of packet which is padded to reach a specific minimum length. I believe that's the problem causing my test case failed. The following patch fixed this issue. Signed-off-by: Aubrey.Li <aubreylee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-17[KEY]: Fix conversion between IPSEC_MODE_xxx and XFRM_MODE_xxx.Kazunori MIYAZAWA
We should not blindly convert between IPSEC_MODE_xxx and XFRM_MODE_xxx just by incrementing / decrementing because the assumption is not true any longer. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Singed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-04-17[NET]: Get rid of alloc_skb_from_cacheHerbert Xu
Since this was added originally for Xen, and Xen has recently (~2.6.18) stopped using this function, we can safely get rid of it. Good timing too since this function has started to bit rot. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-16cache_k8_northbridges() overflows beyond allocationBadari Pulavarty
cache_k8_northbridges() is storing config values to incorrect locations (in flush_words) and also its overflowing beyond the allocation, causing slab verification failures. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-16IB/mthca: Fix data corruption after FMR unmap on SinaiMichael S. Tsirkin
In mthca_arbel_fmr_unmap(), the high bits of the key are masked off. This gets rid of the effect of adjust_key(), which makes sure that bits 3 and 23 of the key are equal when the Sinai throughput optimization is enabled, and so it may happen that an FMR will end up with bits 3 and 23 in the key being different. This causes data corruption, because when enabling the throughput optimization, the driver promises the HCA firmware that bits 3 and 23 of all memory keys will always be equal. Fix by re-applying adjust_key() after masking the key. Thanks to Or Gerlitz for reproducing the problem, and Ariel Shahar for help in debug. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-16Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4313/1: S3C24XX: Update s3c2410 defconfig to 2.6.21-rc6 [ARM] Update mach-types
2007-04-16[ARM] 4313/1: S3C24XX: Update s3c2410 defconfig to 2.6.21-rc6Ben Dooks
Update defconfig to the latest kernel version and enable the h1940 LED driver Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-16[ARM] Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-16[PATCH] x86: Fix potential overflow in perfctr reservationAndi Kleen
While reviewing this code again I found a potential overflow of the bitmap. The p4 oprofile can theoretically set bits beyond the reservation bitmap for specific configurations. Avoid that by sizing the bitmaps properly. Signed-off-by: Andi Kleen <ak@suse.de>
2007-04-16[PATCH] x86: Fix gcc 4.2 _proxy_pda workaroundAndi Kleen
Due to an over aggressive optimizer gcc 4.2 cannot optimize away _proxy_pda in all cases (counter intuitive, but true). This breaks loading of some modules. The earlier workaround to just export a dummy symbol didn't work unfortunately because the module code ignores exports with 0 value. Make it 1 instead. Signed-off-by: Andi Kleen <ak@suse.de>
2007-04-15Linux 2.6.21-rc7Linus Torvalds
I tend to prefer to not have to cut an -rc7, but we still have some network device driver and suspend issues. So here's -rc7. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-15NFS: Fix a list corruption problemTrond Myklebust
We must remove the request from whatever list it is currently on before we can add it to the dirty list. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-14Fix VMI relocation processing logic errorZachary Amsden
Fix logic error in VMI relocation processing. NOPs would always cause a BUG_ON to fire because the != RELOCATION_NONE in the first if clause precluding the == VMI_RELOCATION_NOP in the second clause. Make these direct equality tests and just warn for unsupported relocation types (which should never happen), falling back to native in that case. Thanks to Anthony Liguori for noting this! Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-14NFS: Ensure PG_writeback is cleared when writeback failsTrond Myklebust
If the writebacks are cancelled via nfs_cancel_dirty_list, or due to the memory allocation failing in nfs_flush_one/nfs_flush_multi, then we must ensure that the PG_writeback flag is cleared. Also ensure that we actually own the PG_writeback flag whenever we schedule a new writeback by making nfs_set_page_writeback() return the value of test_set_page_writeback(). The PG_writeback page flag ends up replacing the functionality of the PG_FLUSHING nfs_page flag, so we rip that out too. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-14NFS: Fix two bugs in the O_DIRECT write codeTrond Myklebust
Do not flag an error if the COMMIT call fails and we decide to resend the writes. Let the resend flag the error if it fails. If a write has failed, then nfs_direct_write_result should not attempt to send a commit. It should just exit asap and return the error to the user. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-14NFS: Fix an Oops in nfs_setattr()Trond Myklebust
It looks like nfs_setattr() and nfs_rename() also need to test whether the target is a regular file before calling nfs_wb_all()... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 06:06:09 +0000