aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-06ASoC: fsl: imx-pcm-rpmsg: Add SNDRV_PCM_INFO_BATCH flagShengjiu Wang
[ Upstream commit 2f9426905a63be7ccf8cd10109caf1848aa0993a ] The rpmsg pcm device is a device which should support double buffering. Found this issue with pipewire. When there is no SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will set headroom to be zero, and because rpmsg pcm device don't support residue report, when the latency setting is small, the "delay" always larger than "target" in alsa-pcm.c, that reading next period data is not scheduled on time. With SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will select a smaller period size for device, then the task of reading next period data will be scheduled on time. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1694414287-13291-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06spi: stm32: add a delay before SPI disableValentin Caron
[ Upstream commit 6de8a70c84ee0586fdde4e671626b9caca6aed74 ] As explained in errata sheet, in section "2.14.5 Truncation of SPI output signals after EOT event": On STM32MP1x, EOT interrupt can be thrown before the true end of communication. So we add a delay of a half period to wait the real end of the transmission. Link: https://www.st.com/resource/en/errata_sheet/es0539-stm32mp131x3x5x-device-errata-stmicroelectronics.pdf Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230906132735.748174-1-valentin.caron@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06spi: nxp-fspi: reset the FLSHxCR1 registersHan Xu
[ Upstream commit 18495676f7886e105133f1dc06c1d5e8d5436f32 ] Reset the FLSHxCR1 registers to default value. ROM may set the register value and it affects the SPI NAND normal functions. Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20230906183254.235847-1-han.xu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()Niklas Cassel
[ Upstream commit 80cc944eca4f0baa9c381d0706f3160e491437f2 ] ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING, before calling ap->ops->error_handler() (without holding the ap->lock). If an error IRQ is received while ap->ops->error_handler() is running, the irq handler will set ATA_PFLAG_EH_PENDING. Once ap->ops->error_handler() returns, ata_scsi_port_error_handler() checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration of ATA EH is performed. The problem is that ATA_PFLAG_EH_PENDING is not only cleared by ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset(). ata_eh_reset() is called by ap->ops->error_handler(). This additional clearing done by ata_eh_reset() breaks the whole retry logic in ata_scsi_port_error_handler(). Thus, if an error IRQ is received while ap->ops->error_handler() is running, the port will currently remain frozen and will never get re-enabled. The additional clearing in ata_eh_reset() was introduced in commit 1e641060c4b5 ("libata: clear eh_info on reset completion"). Looking at the original error report: https://marc.info/?l=linux-ide&m=124765325828495&w=2 We can see the following happening: [ 1.074659] ata3: XXX port freeze [ 1.074700] ata3: XXX hardresetting link, stopping engine [ 1.074746] ata3: XXX flipping SControl [ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY [ 1.411475] ata3: XXX port freeze [ 1.420049] ata3: XXX starting engine [ 1.420096] ata3: XXX rc=0, class=1 [ 1.420142] ata3: XXX clearing IRQs for thawing [ 1.420188] ata3: XXX port thawed [ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) We are not supposed to be able to receive an error IRQ while the port is frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled). AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states: "Each bit location can be thought of as reporting a '1' if the virtual "interrupt line" for that port is indicating it wishes to generate an interrupt. That is, if a port has one or more interrupt status bit set, and the enables for those status bits are set, then this bit shall be set." Additionally, AHCI state P:ComInit clearly shows that the state machine will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set. So IS.IPS(x) only gets set if PxIS and PxIE is set. AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states: "The bits in this register are read/write clear. It is set by the level of the virtual interrupt line being a set, and cleared by a write of '1' from the software." So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to IS.IPS(x) for that port. Since PxIE is cleared, the only way to get an interrupt while the port is frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when the port is frozen, is if it was set before the port was frozen. However, since commit 737dd811a3db ("ata: libahci: clear pending interrupt status"), we clear both PxIS and IS.IPS(x) after freezing the port, but before the COMRESET, so the problem that commit 1e641060c4b5 ("libata: clear eh_info on reset completion") fixed can no longer happen. Thus, revert commit 1e641060c4b5 ("libata: clear eh_info on reset completion"), so that the retry logic in ata_scsi_port_error_handler() works once again. (The retry logic is still needed, since we can still get an error IRQ _after_ the port has been thawed, but before ata_scsi_port_error_handler() takes the ap->lock in order to check if ATA_PFLAG_EH_PENDING is set.) Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPPSteve French
[ Upstream commit ebc3d4e44a7e05457825e03d0560153687265523 ] checkpatch flagged a few places with: WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP Also fixed minor typo Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06scsi: pm80xx: Avoid leaking tags when processing ↵Michal Grzedzicki
OPC_INB_SET_CONTROLLER_CONFIG command [ Upstream commit c13e7331745852d0dd7c35eabbe181cbd5b01172 ] Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed when we receive the response. Signed-off-by: Michal Grzedzicki <mge@meta.com> Link: https://lore.kernel.org/r/20230911170340.699533-2-mge@meta.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06scsi: pm80xx: Use phy-specific SAS address when sending PHY_START commandMichal Grzedzicki
[ Upstream commit 71996bb835aed58c7ec4967be1d05190a27339ec ] Some cards have more than one SAS address. Using an incorrect address causes communication issues with some devices like expanders. Closes: https://lore.kernel.org/linux-kernel/A57AEA84-5CA0-403E-8053-106033C73C70@fb.com/ Signed-off-by: Michal Grzedzicki <mge@meta.com> Link: https://lore.kernel.org/r/20230913155611.3183612-1-mge@meta.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06riscv: errata: fix T-Head dcache.cva encodingIcenowy Zheng
[ Upstream commit 8eb8fe67e2c84324398f5983c41b4f831d0705b3 ] The dcache.cva encoding shown in the comments are wrong, it's for dcache.cval1 (which is restricted to L1) instead. Fix this in the comment and in the hardcoded instruction. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Tested-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guo Ren <guoren@kernel.org> Tested-by: Drew Fustini <dfustini@baylibre.com> Link: https://lore.kernel.org/r/20230912072410.2481-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06drm/amdgpu: Handle null atom context in VBIOS info ioctlDavid Francis
[ Upstream commit 5e7e82254270c8cf8b107451c5de01cee2f135ae ] On some APU systems, there is no atom context and so the atom_context struct is null. Add a check to the VBIOS_INFO branch of amdgpu_info_ioctl to handle this case, returning all zeroes. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06drm/amdgpu/nbio4.3: set proper rmmio_remap.reg_offset for SR-IOVAlex Deucher
[ Upstream commit ab43213e7afd08ac68d4282060bacf309e70fd14 ] Needed for HDP flush to work correctly. Reviewed-by: Timmy Tsai <timmtsai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06drm/amdgpu/soc21: don't remap HDP registers for SR-IOVAlex Deucher
[ Upstream commit 1832403cd41ca6b19b24e9d64f79cb08d920ca44 ] This matches the behavior for soc15 and nv. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Timmy Tsai <timmtsai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06drm/amd/display: Don't check registers, if using AUX BL controlSwapnil Patel
[ Upstream commit f5b2c10b57615828b531bb0ae56bd6325a41167e ] [Why] Currently the driver looks DCN registers to access if BL is on or not. This check is not valid if we are using AUX based brightness control. This causes driver to not send out "backlight off" command during power off sequence as it already thinks it is off. [How] Only check DCN registers if we aren't using AUX based brightness control. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Swapnil Patel <swapnil.patel@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06thermal/of: add missing of_node_put()Julia Lawall
[ Upstream commit 8a81cf96f5510aaf9a65d103f7405079a7b0fcc5 ] for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. This was done using the Coccinelle semantic patch iterators/for_each_child.cocci Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06platform/x86: asus-wmi: Support 2023 ROG X16 tablet modeLuke D. Jones
[ Upstream commit 4106a70ddad57ee6d8f98b81d6f036740c72762b ] Add quirk for ASUS ROG X16 (GV601V, 2023 versions) Flow 2-in-1 to enable tablet mode with lid flip (all screen rotations). Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20230905082813.13470-1-luke@ljones.dev Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06platform/mellanox: mlxbf-bootctl: add NET dependency into KconfigDavid Thompson
[ Upstream commit c2dffda1d8f7511505bbbf16ba282f2079b30089 ] The latest version of the mlxbf_bootctl driver utilizes "sysfs_format_mac", and this API is only available if NET is defined in the kernel configuration. This patch changes the mlxbf_bootctl Kconfig to depend on NET. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309031058.JvwNDBKt-lkp@intel.com/ Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20230905133243.31550-1-davthompson@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()Christophe JAILLET
[ Upstream commit e97eb65dd464e7f118a16a26337322d07eb653e2 ] snprintf() returns the "number of characters which *would* be generated for the given input", not the size *really* generated. In order to avoid too large values for 'o' (and potential negative values for "sizeof(linebuf) o") use scnprintf() instead of snprintf(). Note that given the "w < 4" in the for loop, the buffer can NOT overflow, but using the *right* function is always better. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06net/smc: bugfix for smcr v2 server connect success statisticGuangguan Wang
[ Upstream commit 6912e724832c47bb381eb1bd1e483ec8df0d0f0f ] In the macro SMC_STAT_SERV_SUCC_INC, the smcd_version is used to determin whether to increase the v1 statistic or the v2 statistic. It is correct for SMCD. But for SMCR, smcr_version should be used. Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06ring-buffer: Do not attempt to read past "commit"Steven Rostedt (Google)
[ Upstream commit 95a404bd60af6c4d9d8db01ad14fe8957ece31ca ] When iterating over the ring buffer while the ring buffer is active, the writer can corrupt the reader. There's barriers to help detect this and handle it, but that code missed the case where the last event was at the very end of the page and has only 4 bytes left. The checks to detect the corruption by the writer to reads needs to see the length of the event. If the length in the first 4 bytes is zero then the length is stored in the second 4 bytes. But if the writer is in the process of updating that code, there's a small window where the length in the first 4 bytes could be zero even though the length is only 4 bytes. That will cause rb_event_length() to read the next 4 bytes which could happen to be off the allocated page. To protect against this, fail immediately if the next event pointer is less than 8 bytes from the end of the commit (last byte of data), as all events must be a minimum of 8 bytes anyway. Link: https://lore.kernel.org/all/20230905141245.26470-1-Tze-nan.Wu@mediatek.com/ Link: https://lore.kernel.org/linux-trace-kernel/20230907122820.0899019c@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Reported-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06selftests: fix dependency checker scriptRicardo B. Marliere
[ Upstream commit 5f9dd2e896a91bfca90f8463eb6808c03d535d8a ] This patch fixes inconsistencies in the parsing rules of the levels 1 and 2 of the kselftest_deps.sh. It was added the levels 4 and 5 to account for a few edge cases that are present in some tests, also some minor identation styling have been fixed (s/ /\t/g). Signed-off-by: Ricardo B. Marliere <rbmarliere@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06btrfs: assert delayed node locked when removing delayed itemFilipe Manana
[ Upstream commit a57c2d4e46f519b24558ae0752c17eec416ac72a ] When removing a delayed item, or releasing which will remove it as well, we will modify one of the delayed node's rbtrees and item counter if the delayed item is in one of the rbtrees. This require having the delayed node's mutex locked, otherwise we will race with other tasks modifying the rbtrees and the counter. This is motivated by a previous version of another patch actually calling btrfs_release_delayed_item() after unlocking the delayed node's mutex and against a delayed item that is in a rbtree. So assert at __btrfs_remove_delayed_item() that the delayed node's mutex is locked. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06ring-buffer: Avoid softlockup in ring_buffer_resize()Zheng Yejian
[ Upstream commit f6bd2c92488c30ef53b5bd80c52f0a7eee9d545a ] When user resize all trace ring buffer through file 'buffer_size_kb', then in ring_buffer_resize(), kernel allocates buffer pages for each cpu in a loop. If the kernel preemption model is PREEMPT_NONE and there are many cpus and there are many buffer pages to be allocated, it may not give up cpu for a long time and finally cause a softlockup. To avoid it, call cond_resched() after each cpu buffer allocation. Link: https://lore.kernel.org/linux-trace-kernel/20230906081930.3939106-1-zhengyejian1@huawei.com Cc: <mhiramat@kernel.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06selftests/ftrace: Correctly enable event in instance-event.tcZheng Yejian
[ Upstream commit f4e4ada586995b17f828c6d147d1800eb1471450 ] Function instance_set() expects to enable event 'sched_switch', so we should set 1 to its 'enable' file. Testcase passed after this patch: # ./ftracetest test.d/instances/instance-event.tc === Ftrace unit tests === [1] Test creation and deletion of trace instances while setting an event [PASS] # of passed: 1 # of failed: 0 # of unresolved: 0 # of untested: 0 # of unsupported: 0 # of xfailed: 0 # of undefined(test bug): 0 Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC commandKiwoong Kim
[ Upstream commit d32533d30e2119b0c0aa17596734f1f842f750df ] With auto hibern8 enabled, UIC could be busy processing a hibern8 operation and the HCI would reports UIC not ready for a short while through HCS.UCRDY. The UFS driver doesn't currently handle this situation. The UFSHCI spec specifies UCRDY like this: whether the host controller is ready to process UIC COMMAND The 'ready' could be seen as many different meanings. If the meaning includes not processing any request from HCI, processing a hibern8 operation can be 'not ready'. In this situation, the driver needs to wait until the operations is completed. Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com> Link: https://lore.kernel.org/r/550484ffb66300bdcec63d3e304dfd55cb432f1f.1693790060.git.kwmad.kim@samsung.com Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Chanwoo Lee <cw9316.lee@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lockKiwoong Kim
[ Upstream commit 2d3f59cf868b4a2dd678a96cd49bdd91411bd59f ] __ufshcd_send_uic_cmd() is wrapped by uic_cmd_mutex and its related contexts are accessed within the section wrapped by uic_cmd_mutex. Thus, wrapping with host_lock is redundant. Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com> Link: https://lore.kernel.org/r/782ba5f26f0a96e58d85dff50751787d2d2a6b2b.1693790060.git.kwmad.kim@samsung.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Chanwoo Lee <cw9316.lee@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06scsi: qedf: Add synchronization between I/O completions and abortJaved Hasan
[ Upstream commit 7df0b2605489bef3f4223ad66f1f9bb8d50d4cd2 ] Avoid race condition between I/O completion and abort processing by protecting the cmd_type with the rport lock. Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Link: https://lore.kernel.org/r/20230901060646.27885-1-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06parisc: irq: Make irq_stack_union static to avoid sparse warningHelge Deller
[ Upstream commit b1bef1388c427cdad7331a9c8eb4ebbbe5b954b0 ] Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06parisc: drivers: Fix sparse warningHelge Deller
[ Upstream commit b137b9d60b8add5620a06c687a71ce18776730b0 ] Fix "warning: directive in macro's argument list" warning. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06parisc: iosapic.c: Fix sparse warningsHelge Deller
[ Upstream commit 927c6c8aa27c284a799b8c18784e37d3373af908 ] Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06parisc: sba: Fix compile warning wrt list of SBA devicesHelge Deller
[ Upstream commit eb3255ee8f6f4691471a28fbf22db5e8901116cd ] Fix this makecheck warning: drivers/parisc/sba_iommu.c:98:19: warning: symbol 'sba_list' was not declared. Should it be static? Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid()Nigel Kirkland
[ Upstream commit 8ae5b3a685dc59a8cf7ccfe0e850999ba9727a3c ] The nvme_fc_fcp_op structure describing an AEN operation is initialized with a null request structure pointer. An FC LLDD may make a call to nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation. Add validation of the request structure pointer before dereference. Signed-off-by: Nigel Kirkland <nkirkland2304@gmail.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drainTobias Schramm
[ Upstream commit 1f11f4202caf5710204d334fe63392052783876d ] Previously the transfer complete IRQ immediately drained to RX FIFO to read any data remaining in FIFO to the RX buffer. This behaviour is correct when dealing with SPI in interrupt mode. However in DMA mode the transfer complete interrupt still fires as soon as all bytes to be transferred have been stored in the FIFO. At that point data in the FIFO still needs to be picked up by the DMA engine. Thus the drain procedure and DMA engine end up racing to read from RX FIFO, corrupting any data read. Additionally the RX buffer pointer is never adjusted according to DMA progress in DMA mode, thus calling the RX FIFO drain procedure in DMA mode is a bug. Fix corruptions in DMA RX mode by draining RX FIFO only in interrupt mode. Also wait for completion of RX DMA when in DMA mode before returning to ensure all data has been copied to the supplied memory buffer. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Link: https://lore.kernel.org/r/20230827152558.5368-3-t.schramm@manjaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06spi: sun6i: reduce DMA RX transfer width to single byteTobias Schramm
[ Upstream commit 171f8a49f212e87a8b04087568e1b3d132e36a18 ] Through empirical testing it has been determined that sometimes RX SPI transfers with DMA enabled return corrupted data. This is down to single or even multiple bytes lost during DMA transfer from SPI peripheral to memory. It seems the RX FIFO within the SPI peripheral can become confused when performing bus read accesses wider than a single byte to it during an active SPI transfer. This patch reduces the width of individual DMA read accesses to the RX FIFO to a single byte to mitigate that issue. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Link: https://lore.kernel.org/r/20230827152558.5368-2-t.schramm@manjaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06bpf: Annotate bpf_long_memcpy with data_raceDaniel Borkmann
[ Upstream commit 6a86b5b5cd76d2734304a0173f5f01aa8aa2025e ] syzbot reported a data race splat between two processes trying to update the same BPF map value via syscall on different CPUs: BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0xfffffff000002788 The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size and forced to use long read/writes to try to atomically copy long counters. It is best-effort only and no barriers are here since it _will_ race with concurrent updates from BPF programs. The bpf_long_memcpy() is called from bpf(2) syscall. Marco suggested that the best way to make this known to KCSAN would be to use data_race() annotation. Reported-by: syzbot+97522333291430dd277f@syzkaller.appspotmail.com Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Marco Elver <elver@google.com> Link: https://lore.kernel.org/bpf/000000000000d87a7f06040c970c@google.com Link: https://lore.kernel.org/bpf/57628f7a15e20d502247c3b55fceb1cb2b31f266.1693342186.git.daniel@iogearbox.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lockSergey Senozhatsky
[ Upstream commit fb5a4315591dae307a65fc246ca80b5159d296e1 ] __dma_entry_alloc_check_leak() calls into printk -> serial console output (qcom geni) and grabs port->lock under free_entries_lock spin lock, which is a reverse locking dependency chain as qcom_geni IRQ handler can call into dma-debug code and grab free_entries_lock under port->lock. Move __dma_entry_alloc_check_leak() call out of free_entries_lock scope so that we don't acquire serial console's port->lock under it. Trimmed-down lockdep splat: The existing dependency chain (in reverse order) is: -> #2 (free_entries_lock){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 dma_entry_alloc+0x38/0x110 debug_dma_map_page+0x60/0xf8 dma_map_page_attrs+0x1e0/0x230 dma_map_single_attrs.constprop.0+0x6c/0xc8 geni_se_rx_dma_prep+0x40/0xcc qcom_geni_serial_isr+0x310/0x510 __handle_irq_event_percpu+0x110/0x244 handle_irq_event_percpu+0x20/0x54 handle_irq_event+0x50/0x88 handle_fasteoi_irq+0xa4/0xcc handle_irq_desc+0x28/0x40 generic_handle_domain_irq+0x24/0x30 gic_handle_irq+0xc4/0x148 do_interrupt_handler+0xa4/0xb0 el1_interrupt+0x34/0x64 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 arch_local_irq_enable+0x4/0x8 ____do_softirq+0x18/0x24 ... -> #1 (&port_lock_key){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 qcom_geni_serial_console_write+0x184/0x1dc console_flush_all+0x344/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 register_console+0x230/0x38c uart_add_one_port+0x338/0x494 qcom_geni_serial_probe+0x390/0x424 platform_probe+0x70/0xc0 really_probe+0x148/0x280 __driver_probe_device+0xfc/0x114 driver_probe_device+0x44/0x100 __device_attach_driver+0x64/0xdc bus_for_each_drv+0xb0/0xd8 __device_attach+0xe4/0x140 device_initial_probe+0x1c/0x28 bus_probe_device+0x44/0xb0 device_add+0x538/0x668 of_device_add+0x44/0x50 of_platform_device_create_pdata+0x94/0xc8 of_platform_bus_create+0x270/0x304 of_platform_populate+0xac/0xc4 devm_of_platform_populate+0x60/0xac geni_se_probe+0x154/0x160 platform_probe+0x70/0xc0 ... -> #0 (console_owner){-...}-{0:0}: __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 dma_entry_alloc+0xb4/0x110 debug_dma_map_sg+0xdc/0x2f8 __dma_map_sg_attrs+0xac/0xe4 dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 [msm] msm_gem_pin_pages_locked+0x38/0xac [msm] msm_gem_pin_vma_locked+0x58/0x88 [msm] msm_ioctl_gem_submit+0xde4/0x13ac [msm] drm_ioctl_kernel+0xe0/0x15c drm_ioctl+0x2e8/0x3f4 vfs_ioctl+0x30/0x50 ... Chain exists of: console_owner --> &port_lock_key --> free_entries_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(free_entries_lock); lock(&port_lock_key); lock(free_entries_lock); lock(console_owner); *** DEADLOCK *** Call trace: dump_backtrace+0xb4/0xf0 show_stack+0x20/0x30 dump_stack_lvl+0x60/0x84 dump_stack+0x18/0x24 print_circular_bug+0x1cc/0x234 check_noncircular+0x78/0xac __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 dma_entry_alloc+0xb4/0x110 debug_dma_map_sg+0xdc/0x2f8 __dma_map_sg_attrs+0xac/0xe4 dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 [msm] msm_gem_pin_pages_locked+0x38/0xac [msm] msm_gem_pin_vma_locked+0x58/0x88 [msm] msm_ioctl_gem_submit+0xde4/0x13ac [msm] drm_ioctl_kernel+0xe0/0x15c drm_ioctl+0x2e8/0x3f4 vfs_ioctl+0x30/0x50 ... Reported-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06ceph: drop messages from MDS when unmountingXiubo Li
[ Upstream commit e3dfcab2080dc1f9a4b09cc1327361bc2845bfcd ] When unmounting all the dirty buffers will be flushed and after the last osd request is finished the last reference of the i_count will be released. Then it will flush the dirty cap/snap to MDSs, and the unmounting won't wait the possible acks, which will ihold the inodes when updating the metadata locally but makes no sense any more, of this. This will make the evict_inodes() to skip these inodes. If encrypt is enabled the kernel generate a warning when removing the encrypt keys when the skipped inodes still hold the keyring: WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0 CPU: 4 PID: 168846 Comm: umount Tainted: G S 6.1.0-rc5-ceph-g72ead199864c #1 Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015 RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0 RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00 RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000 RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000 R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40 R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000 FS: 00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> generic_shutdown_super+0x47/0x120 kill_anon_super+0x14/0x30 ceph_kill_sb+0x36/0x90 [ceph] deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x67/0xb0 exit_to_user_mode_prepare+0x23d/0x240 syscall_exit_to_user_mode+0x25/0x60 do_syscall_64+0x40/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd83dc39e9b Later the kernel will crash when iput() the inodes and dereferencing the "sb->s_master_keys", which has been released by the generic_shutdown_super(). Link: https://tracker.ceph.com/issues/59162 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06x86/reboot: VMCLEAR active VMCSes before emergency rebootSean Christopherson
[ Upstream commit b23c83ad2c638420ec0608a9de354507c41bec29 ] VMCLEAR active VMCSes before any emergency reboot, not just if the kernel may kexec into a new kernel after a crash. Per Intel's SDM, the VMX architecture doesn't require the CPU to flush the VMCS cache on INIT. If an emergency reboot doesn't RESET CPUs, cached VMCSes could theoretically be kept and only be written back to memory after the new kernel is booted, i.e. could effectively corrupt memory after reboot. Opportunistically remove the setting of the global pointer to NULL to make checkpatch happy. Cc: Andrew Cooper <Andrew.Cooper3@citrix.com> Link: https://lore.kernel.org/r/20230721201859.2307736-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06i2c: npcm7xx: Fix callback completion orderingWilliam A. Kennington III
[ Upstream commit 92e73d807b68b2214fcafca4e130b5300a9d4b3c ] Sometimes, our completions race with new master transfers and override the bus->operation and bus->master_or_slave variables. This causes transactions to timeout and kernel crashes less frequently. To remedy this, we re-order all completions to the very end of the function. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: William A. Kennington III <william@wkennington.com> Reviewed-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chipWenhua Lin
[ Upstream commit 26d9e5640d2130ee16df7b1fb6a908f460ab004c ] The drivers uses a mutex and I2C bus access in its PMIC EIC chip get implementation. This means these functions can sleep and the PMIC EIC chip should set the can_sleep property to true. This will ensure that a warning is printed when trying to get the value from a context that potentially can't sleep. Fixes: 348f3cde84ab ("gpio: Add Spreadtrum PMIC EIC driver support") Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06firmware: arm_ffa: Don't set the memory region attributes for MEM_LENDSudeep Holla
[ Upstream commit 9dda1178479aa0a73fe0eaabfe2d9a1c603cfeed ] As per the FF-A specification: section "Usage of other memory region attributes", in a transaction to donate memory or lend memory to a single borrower, if the receiver is a PE or Proxy endpoint, the owner must not specify the attributes and the relayer will return INVALID_PARAMETERS if the attributes are set. Let us not set the memory region attributes for MEM_LEND. Fixes: 82a8daaecfd9 ("firmware: arm_ffa: Add support for MEM_LEND") Reported-by: Joao Alves <joao.alves@arm.com> Reported-by: Olivier Deprez <olivier.deprez@arm.com> Link: https://lore.kernel.org/r/20230919-ffa_v1-1_notif-v2-13-6f3a3ca3923c@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06arm64: dts: imx: Add imx8mm-prt8mm.dtb to buildRob Herring
[ Upstream commit f09752eaf0e8f8befc26b44c4d3e15633e56d16a ] imx8mm-prt8mm.dts was not getting built. Add it to the build. Fixes: 58497d7a13ed ("arm64: dts: imx: add Protonic PRT8MM board") Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06soc: imx8m: Enable OCOTP clock for imx8mm before reading registersNathan Rossi
[ Upstream commit 9d1e8275a28f51599d754ce661c91e0a689c0234 ] Commit 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register") added configuration to enable the OCOTP clock before attempting to read from the associated registers. This same kexec issue is present with the imx8m SoCs that use the imx8mm_soc_uid function (e.g. imx8mp). This requires the imx8mm_soc_uid function to configure the OCOTP clock before accessing the associated registers. This change implements the same clock enable functionality that is present in the imx8mq_soc_revision function for the imx8mm_soc_uid function. Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Fixes: 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06selftests/powerpc: Fix emit_tests to work with run_kselftest.shMichael Ellerman
[ Upstream commit 58b33e78a31782ffe25d404d5eba9a45fe636e27 ] In order to use run_kselftest.sh the list of tests must be emitted to populate kselftest-list.txt. The powerpc Makefile is written to use EMIT_TESTS. But support for EMIT_TESTS was dropped in commit d4e59a536f50 ("selftests: Use runner.sh for emit targets"). Although prior to that commit a548de0fe8e1 ("selftests: lib.mk: add test execute bit check to EMIT_TESTS") had already broken run_kselftest.sh for powerpc due to the executable check using the wrong path. It can be fixed by replacing the EMIT_TESTS definitions with actual emit_tests rules in the powerpc Makefiles. This makes run_kselftest.sh able to run powerpc tests: $ cd linux $ export ARCH=powerpc $ export CROSS_COMPILE=powerpc64le-linux-gnu- $ make headers $ make -j -C tools/testing/selftests install $ grep -c "^powerpc" tools/testing/selftests/kselftest_install/kselftest-list.txt 182 Fixes: d4e59a536f50 ("selftests: Use runner.sh for emit targets") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230921072623.828772-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06selftests/powerpc: Pass make context to childrenBenjamin Gray
[ Upstream commit 4ecd0868c5138238dec8a1549bb6ff8e5b48208b ] Make supports passing the 'jobserver' (parallel make support) to child invocations of make when either 1. The target command uses $(MAKE) directly 2. The command starts with '+' This context is not passed through expansions that result in $(MAKE), so the macros used in several places fail to pass on the jobserver context. Warnings are also raised by the child mentioning this. Prepend macros lines that invoke $(MAKE) with '+' to allow passing the jobserver context to these children. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230228000709.124727-3-bgray@linux.ibm.com Stable-dep-of: 58b33e78a317 ("selftests/powerpc: Fix emit_tests to work with run_kselftest.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06selftests/powerpc: Use CLEAN macro to fix make warningBenjamin Gray
[ Upstream commit 69608683a65be5322ef44091eaeb9890472b2eea ] The CLEAN macro was added in 337f1e36 to prevent the Makefile:50: warning: overriding recipe for target 'clean' ../../lib.mk:124: warning: ignoring old recipe for target 'clean' style warnings. Expand it's use to fix another case of redefining a target directly. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230228000709.124727-2-bgray@linux.ibm.com Stable-dep-of: 58b33e78a317 ("selftests/powerpc: Fix emit_tests to work with run_kselftest.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06power: supply: rk817: Fix node refcount leakChris Morgan
[ Upstream commit 488ef44c068e79752dba8eda0b75f524f111a695 ] Dan Carpenter reports that the Smatch static checker warning has found that there is another refcount leak in the probe function. While of_node_put() was added in one of the return paths, it should in fact be added for ALL return paths that return an error and at driver removal time. Fixes: 54c03bfd094f ("power: supply: Fix refcount leak in rk817_charger_probe") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Closes: https://lore.kernel.org/linux-pm/dc0bb0f8-212d-4be7-be69-becd2a3f9a80@kili.mountain/ Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20230920145644.57964-1-macroalpha82@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06xtensa: boot/lib: fix function prototypesMax Filippov
[ Upstream commit f54d02c8f2cc4b46ba2a3bd8252a6750453b6f2b ] Add function prototype for gunzip() to the boot library code and make exit() and zalloc() static. arch/xtensa/boot/lib/zmem.c:8:6: warning: no previous prototype for 'exit' [-Wmissing-prototypes] 8 | void exit (void) arch/xtensa/boot/lib/zmem.c:13:7: warning: no previous prototype for 'zalloc' [-Wmissing-prototypes] 13 | void *zalloc(unsigned size) arch/xtensa/boot/lib/zmem.c:35:6: warning: no previous prototype for 'gunzip' [-Wmissing-prototypes] 35 | void gunzip (void *dst, int dstlen, unsigned char *src, int *lenp) Fixes: 4bedea945451 ("xtensa: Architecture support for Tensilica Xtensa Part 2") Fixes: e7d163f76665 ("xtensa: Removed local copy of zlib and fixed O= support") Suggested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06xtensa: umulsidi3: fix conditional expressionRandy Dunlap
[ Upstream commit 9aecda97ec3deecbfa7670877c8ddfd3d0fc87c4 ] Even when a variant has one or more of these defines set to 1, the multiplier code paths are not used. Change the expression so that the correct code paths are used. arch/xtensa/lib/umulsidi3.S:44:38: warning: "XCHAL_NO_MUL" is not defined, evaluates to 0 [-Wundef] 44 | #if defined(__XTENSA_CALL0_ABI__) && XCHAL_NO_MUL arch/xtensa/lib/umulsidi3.S:145:38: warning: "XCHAL_NO_MUL" is not defined, evaluates to 0 [-Wundef] 145 | #if defined(__XTENSA_CALL0_ABI__) && XCHAL_NO_MUL arch/xtensa/lib/umulsidi3.S:159:5: warning: "XCHAL_NO_MUL" is not defined, evaluates to 0 [-Wundef] 159 | #if XCHAL_NO_MUL Fixes: 8939c58d68f9 ("xtensa: add __umulsidi3 helper") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20230920052139.10570-16-rdunlap@infradead.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06xtensa: boot: don't add include-dirsRandy Dunlap
[ Upstream commit 54d3d7d363823782c3444ddc41bb8cf1edc80514 ] Drop the -I<include-dir> options to prevent build warnings since there is not boot/include directory: cc1: warning: arch/xtensa/boot/include: No such file or directory [-Wmissing-include-dirs] Fixes: 437374e9a950 ("restore arch/{ppc/xtensa}/boot cflags") Fixes: 4bedea945451 ("xtensa: Architecture support for Tensilica Xtensa Part 2") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20230920052139.10570-15-rdunlap@infradead.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06xtensa: iss/network: make functions staticRandy Dunlap
[ Upstream commit 1b59efeb59851277266318f4e0132aa61ce3455e ] Make 2 functions static to prevent build warnings: arch/xtensa/platforms/iss/network.c:204:16: warning: no previous prototype for 'tuntap_protocol' [-Wmissing-prototypes] 204 | unsigned short tuntap_protocol(struct sk_buff *skb) arch/xtensa/platforms/iss/network.c:444:6: warning: no previous prototype for 'iss_net_user_timer_expire' [-Wmissing-prototypes] 444 | void iss_net_user_timer_expire(struct timer_list *unused) Fixes: 7282bee78798 ("xtensa: Architecture support for Tensilica Xtensa Part 8") Fixes: d8479a21a98b ("xtensa: Convert timers to use timer_setup()") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20230920052139.10570-14-rdunlap@infradead.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-06xtensa: add default definition for XCHAL_HAVE_DIV32Max Filippov
[ Upstream commit 494e87ffa0159b3f879694a9231089707792a44d ] When variant FSF is set, XCHAL_HAVE_DIV32 is not defined. Add default definition for that macro to prevent build warnings: arch/xtensa/lib/divsi3.S:9:5: warning: "XCHAL_HAVE_DIV32" is not defined, evaluates to 0 [-Wundef] 9 | #if XCHAL_HAVE_DIV32 arch/xtensa/lib/modsi3.S:9:5: warning: "XCHAL_HAVE_DIV32" is not defined, evaluates to 0 [-Wundef] 9 | #if XCHAL_HAVE_DIV32 Fixes: 173d6681380a ("xtensa: remove extra header files") Suggested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202309150556.t0yCdv3g-lkp@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 08:52:30 +0000