aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-24mfd: Add Intel MSIC driverMika Westerberg
Add support for Intel MSIC chip found on Intel Medfield platforms. This chip embeds several subdevices: audio, ADC, GPIO, power button, etc. The driver creates platform device for each subdevice. We also provide an MSIC register access API which should replace the more generic SCU IPC interface currently used. Existing drivers can choose whether they convert to this new API or stick with the SCU IPC interface. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Make jz4740_adc_driver staticLars-Peter Clausen
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24regulator: Finish mc13783 conversion to the mc13xxx APISamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24leds: Finish mc13783 conversion to the mc13xxx APISamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Simulate active high IRQs with wm831xMark Brown
In order to ease system integration provide a simulation of active high IRQs on the GPIOs by polling the GPIO status when an IRQ is generated. This isn't ideal on several fronts and will miss initially active IRQs in the current implementation but it should work well for most cases. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24ARM: imx/mx31moboard: Add mc13783 power button supportPhilippe Rétornaz
Add the power-on button on mx31moboard using MC13783 PMIC. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24input: Add power button support for mc13783Philippe Rétornaz
This adds support for the power-on buttons of MC13783 PMIC. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Remove unused mc13xxx definesPhilippe Rétornaz
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24ARM: imx+mc13xxx: remove obsolete leds and regulators flagsPhilippe Rétornaz
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Implicitly register mc13xxx led subdevicePhilippe Rétornaz
A led subdevice is registered now iff the corresponding platform data is available. Without platform data the device isn't usable so this is a sound check. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Unconditionally register mc13xxx regulator subdevicePhilippe Rétornaz
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Remove IRQF_DISABLED flag from twl4030-irqSamuel Ortiz
IRQF_DISABLED is a NOOP and is scheduled for removal. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Remove IRQF_DISABLEDYong Zhang
This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Set twl6030 irq_wake infrastructure upSantosh Shilimkar
TWL6030 devices have an interrupt line which is connected to application processor like OMAP. These devices support multiple features such as MMC card detect, USB cable detect, RTC interrupt, etc. that must wake up the application processor. With this change, TWL6030 client drivers can make use of irq_wake() if the wakeup is desirable on it's irq events. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Support software initiated shutdown of WM831x PMICsMark Brown
In systems where there is no hardware signal from the processor to the PMIC to initiate the final power off sequence we must initiate the shutdown with a register write to the PMIC. Support such systems in the driver. Since this may prevent a full shutdown of the system platform data is used to enable the feature. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Fix twl4030 dependencies for audio codecThomas Weber
The codec for Devkit8000 (TWL4030) was not detected except when build with CONFIG_SND_SOC_ALL_CODECS. twl-core.c still uses the CONFIG_TWL4030_CODEC for twl_has_codec(). In commit 57fe7251f5bfc4332f24479376de48a1e8ca6211 the CONFIG_TWL4030_CODEC was renamed into CONFIG_MFD_TWL4030_AUDIO, thatswhy the codec was not detected. This patch renames the CONFIG_ TWL4030_CODEC into CONFIG_MFD_TWL4030_AUDIO in twl-core.c. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: remove CONFIG_MFD_SUPPORTArnd Bergmann
We currently have two symbols to control compilation the MFD subsystem, MFD_SUPPORT and MFD_CORE. The MFD_SUPPORT is actually not required at all, it only hides the submenu when not set, with the effect that Kconfig warns about missing dependencies when another driver selects an MFD driver while MFD_SUPPORT is disabled. Turning the MFD submenu back from menuconfig into a plain menu simplifies the Kconfig syntax for those kinds of users and avoids the surprise when the menu suddenly appears because another driver was enabled that selects this symbol. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-24mfd: Remove mc13783 API functions and symbolsUwe Kleine-König
Now that all in-tree users are fixed to use the more general mc13xxx API the obsolete stuff can go away. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24hwmon: Convert mc13783-adc to mc13xxx APIUwe Kleine-König
The mc13783_... functions are going to be removed, so switch to the more generic API. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24ARM: imx: use mc13xxx constants instead of mc13783Uwe Kleine-König
The latter constants are going to be removed in favour of the former Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24input: Convert mc13783-ts to mc13xxx APIUwe Kleine-König
This is the first step to also support the touch interface of the mc13892 pmic chip. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Provide a generic version of mc13xxx adc_do_conversionUwe Kleine-König
This is needed to convert the touch driver away from using struct mc13783. Note this patch drops MC13783_ADC0_ADREFMODE. This is unused and doesn't exist on mc13892. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24leds: Convert mc13783 driver to mc13xxx MFDDavid Jander
mc13xxx is the more general API and most of the mc13783_... functions are going to die. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Select REGMAP_I2C from WM8400Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Set twl4030-irq irq nested flagFelipe Balbi
Threads from twl4030's children will be called nested in the context of the demultiplexing handler on twl4030-irq.c. Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Drop twl4030-irq's edge_workFelipe Balbi
... and do all the synchronization with the hardware during bus_sync_unlock. We can now remove all the workqueues. Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Drop twl4030-irq's mask_workFelipe Balbi
... we can do the synchronization with the hardware when calling bus_sync_unlock as we're supposed to. While at that, also make variable names uniform on all functions. Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Drop the twl4030-irq kthreadFelipe Balbi
... and use threaded IRQ infrastructure. Later patches will come dropping both workqueues and setting the nested thread flag. Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Implement bus_lock/bus_sync_unlock twl4030-irq methodsFelipe Balbi
For doing that, drop the locking and change that to a mutex. Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Remove twl4030-irq trailing whitespacesFelipe Balbi
trivial patch, no functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Wake-up from Suspend MAX8997 supportMyungJoo Ham
- Support wake-up from suspend-to-ram. - Handle pending interrupt after a resume. - If pdata->wakeup is enabled, by default, the device is assumed to be capable of wakeup (the interrupt pin is connected to a wakeup-source GPIO) and may wakeup the system (MAX8997 has a power button input pin). Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Add more checks for WM8994 being active during suspendMark Brown
Enhancements to the WM8994 audio driver and new features on more modern devices in the series mean that we can no longer rely on VMID being active as an indication that the device is active. Add further checks for digital paths and microphone detection. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24arm: BeagleBoard: add support for the twl4030-madcKyle Manna
Signed-off-by: Kyle Manna <kyle@kylemanna.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Turn on the twl4030-madc MADC clockKyle Manna
Without turning the MADC clock on, no MADC conversions occur. $ cat /sys/class/hwmon/hwmon0/device/in8_input [ 53.428436] twl4030_madc twl4030_madc: conversion timeout! cat: read error: Resource temporarily unavailable Signed-off-by: Kyle Manna <kyle@kylemanna.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Allow WM8994 LDO enable pulls to be disabledMark Brown
In systems where the LDO enables are always driven (for example, being connected to an always on supply rail or a GPIO which is driven by the CPU even in suspend) then we can disable the pull downs on the LDO for a small power savings. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Make sure to request twl6030 IRQ before using the irq_numAxel Lin
I was trying to fix the error handling part because in the case of request_irq failure, it should call kthread_stop instead of free_irq. But it seems more reasonable to do request_irq before calling kthread_run. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Refactor ab8500 GPADC API, add raw accessKarl Komierowski
Refactor the GPADC interface to avoid bugs in calling code: - ab8500_gpadc_[convert|read_raw|ad_to_voltage] clarifies each functions use case, *convert wraps *read_raw, and we can access raw ADC values properly. - Renamed gpadc function arguments from "input" to "channel" to clarify use, so we don't get confused again. Signed-off-by: Kalle Komierowski <kalle.komierowski@stericsson.com> Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: John Beckett <john.beckett@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Clean timberdale error handling code upJulia Lawall
In the first three cases, ioremap has been called, so iounmap is needed. A new label for this is introduced, to differentiate it from err_msix, which is the first point at which msix_entries actually needs to be freed. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Add missing #ifdef around tc3589x PM blockLinus Walleij
The CONFIG_PM code was unconditionally compiled in despite the dev_pm_ops only being included into the driver struct if used. Fix this by adding the missing #ifdef. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Define asic3 gpio_chip labelPaul Parsons
Defined the gpio_chip label in the mfd/asic3 driver for diagnostics. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Make asic3_clk_enable() a void functionPaul Parsons
The return value of asic3_clk_enable() was neither used nor useful. So let's make it a void function, and thereby match asic3_clk_disable(). Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Add asic3 based LED suspend/resume handlersPaul Parsons
Added led suspend/resume handlers to the leds/leds-asic3 and mfd/asic3 drivers. On suspend the leds will be turned off and their clocks disabled. On resume the reverse. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Fix asic3 based SD card resume after suspendPaul Parsons
The mfd/asic3 driver did not define the suspend/resume handlers for the mmc cell driver. Consequently the mmc driver did not resume properly after returning from suspend, making sd cards unusable and preventing suspend from being entered a second time. This patch adds the suspend/resume handlers, fixing the problem. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Remove spurious newlines from wm831x-irq.cMark Brown
More annoying than usual as they're in the middle of a function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Convert pcf50633 to use new register map APIMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Fix section mismatch warning in ab3550-coreWanlong Gao
This patch fixes: WARNING: drivers/mfd/built-in.o(.data+0x9998): Section mismatch in reference from the variable ab3550_driver to the function .init.text:ab3550_probe() The variable ab3550_driver references the function __init ab3550_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24Linux 3.1Linus Torvalds
2011-10-24Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: intel-iommu: fix superpage support in pfn_to_dma_pte() intel-iommu: set iommu_superpage on VM domains to lowest common denominator intel-iommu: fix return value of iommu_unmap() API MAINTAINERS: Update VT-d entry for drivers/pci -> drivers/iommu move intel-iommu: Export a flag indicating that the IOMMU is used for iGFX. intel-iommu: Workaround IOTLB hang on Ironlake GPU intel-iommu: Fix AB-BA lockdep report
2011-10-24Merge branch 'for-linus' of http://people.redhat.com/agk/git/linux-dmLinus Torvalds
* 'for-linus' of http://people.redhat.com/agk/git/linux-dm: dm kcopyd: fix job_pool leak
2011-10-24x86: Fix S4 regressionTakashi Iwai
Commit 4b239f458 ("x86-64, mm: Put early page table high") causes a S4 regression since 2.6.39, namely the machine reboots occasionally at S4 resume. It doesn't happen always, overall rate is about 1/20. But, like other bugs, once when this happens, it continues to happen. This patch fixes the problem by essentially reverting the memory assignment in the older way. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Yinghai Lu <yinghai.lu@oracle.com> [ We'll hopefully find the real fix, but that's too late for 3.1 now ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 02:48:38 +0000