aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-23bus: ixp4xx: fix IXP4XX_EXP_T1_MASKJonas Gorski
commit 6722e46513e0af8e2fff4698f7cb78bc50a9f13f upstream. The IXP4XX_EXP_T1_MASK was shifted one bit to the right, overlapping IXP4XX_EXP_T2_MASK and leaving bit 29 unused. The offset being wrong is also confirmed at least by the datasheet of IXP45X/46X [1]. Fix this by aligning it to IXP4XX_EXP_T1_SHIFT. [1] https://www.intel.com/content/dam/www/public/us/en/documents/manuals/ixp45x-ixp46x-developers-manual.pdf Cc: stable@vger.kernel.org Fixes: 1c953bda90ca ("bus: ixp4xx: Add a driver for IXP4xx expansion bus") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Link: https://lore.kernel.org/r/20230624112958.27727-1-jonas.gorski@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230624122139.3229642-1-linus.walleij@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23Revert "8250: add support for ASIX devices with a FIFO bug"Jiaqing Zhao
commit a82d62f708545d22859584e0e0620da8e3759bbc upstream. This reverts commit eb26dfe8aa7eeb5a5aa0b7574550125f8aa4c3b3. Commit eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX (0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in 1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always takes precedence over the ASIX entry even since it was initially merged, code in that commit is always unreachable. In my tests, adding the FIFO workaround to pci_netmos_init() makes no difference, and the vendor driver also does not have such workaround. Given that the code was never used for over a decade, it's safe to revert it. Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on their newer AX99100 PCIe serial controllers released on 2016. The FIFO workaround should not be intended for these newer controllers, and it was never implemented in vendor driver. Fixes: eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug") Cc: stable <stable@kernel.org> Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23soundwire: qcom: fix storing port config out-of-boundsKrzysztof Kozlowski
commit 490937d479abe5f6584e69b96df066bc87be92e9 upstream. The 'qcom_swrm_ctrl->pconfig' has size of QCOM_SDW_MAX_PORTS (14), however we index it starting from 1, not 0, to match real port numbers. This can lead to writing port config past 'pconfig' bounds and overwriting next member of 'qcom_swrm_ctrl' struct. Reported also by smatch: drivers/soundwire/qcom.c:1269 qcom_swrm_get_port_config() error: buffer overflow 'ctrl->pconfig' 14 <= 14 Fixes: 9916c02ccd74 ("soundwire: qcom: cleanup internal port config indexing") Cc: <stable@vger.kernel.org> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202305201301.sCJ8UDKV-lkp@intel.com/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230601102525.609627-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23opp: Fix use-after-free in lazy_opp_tables after probe deferralStephan Gerhold
commit b2a2ab039bd58f51355e33d7d3fc64605d7f870d upstream. When dev_pm_opp_of_find_icc_paths() in _allocate_opp_table() returns -EPROBE_DEFER, the opp_table is freed again, to wait until all the interconnect paths are available. However, if the OPP table is using required-opps then it may already have been added to the global lazy_opp_tables list. The error path does not remove the opp_table from the list again. This can cause crashes later when the provider of the required-opps is added, since we will iterate over OPP tables that have already been freed. E.g.: Unable to handle kernel NULL pointer dereference when read CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.4.0-rc3 PC is at _of_add_opp_table_v2 (include/linux/of.h:949 drivers/opp/of.c:98 drivers/opp/of.c:344 drivers/opp/of.c:404 drivers/opp/of.c:1032) -> lazy_link_required_opp_table() Fix this by calling _of_clear_opp_table() to remove the opp_table from the list and clear other allocated resources. While at it, also add the missing mutex_destroy() calls in the error path. Cc: stable@vger.kernel.org Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Fixes: 7eba0c7641b0 ("opp: Allow lazy-linking of required-opps") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23meson saradc: fix clock divider mask lengthGeorge Stark
commit c57fa0037024c92c2ca34243e79e857da5d2c0a9 upstream. According to the datasheets of supported meson SoCs length of ADC_CLK_DIV field is 6-bit. Although all supported SoCs have the register with that field documented later SoCs use external clock rather than ADC internal clock so this patch affects only meson8 family (S8* SoCs). Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230606165357.42417-1-gnstark@sberdevices.ru Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23xhci: Show ZHAOXIN xHCI root hub speed correctlyWeitao Wang
commit d9b0328d0b8b8298dfdc97cd8e0e2371d4bcc97b upstream. Some ZHAOXIN xHCI controllers follow usb3.1 spec, but only support gen1 speed 5Gbps. While in Linux kernel, if xHCI suspport usb3.1, root hub speed will show on 10Gbps. To fix this issue of ZHAOXIN xHCI platforms, read usb speed ID supported by xHCI to determine root hub speed. And add a quirk XHCI_ZHAOXIN_HOST for this issue. [fix warning about uninitialized symbol -Mathias] Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Message-ID: <20230602144009.1225632-11-mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23xhci: Fix TRB prefetch issue of ZHAOXIN hostsWeitao Wang
commit 2a865a652299f5666f3b785cbe758c5f57453036 upstream. On some ZHAOXIN hosts, xHCI will prefetch TRB for performance improvement. However this TRB prefetch mechanism may cross page boundary, which may access memory not allocated by xHCI driver. In order to fix this issue, two pages was allocated for a segment and only the first page will be used. And add a quirk XHCI_ZHAOXIN_TRB_FETCH for this issue. Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Message-ID: <20230602144009.1225632-10-mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23xhci: Fix resume issue of some ZHAOXIN hostsWeitao Wang
commit f927728186f0de1167262d6a632f9f7e96433d1a upstream. On ZHAOXIN ZX-100 project, xHCI can't work normally after resume from system Sx state. To fix this issue, when resume from system Sx state, reinitialize xHCI instead of restore. So, Add XHCI_RESET_ON_RESUME quirk for ZX-100 to fix issue of resuming from system Sx state. Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Message-ID: <20230602144009.1225632-9-mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23ceph: don't let check_caps skip sending responses for revoke msgsXiubo Li
commit 257e6172ab36ebbe295a6c9ee9a9dd0fe54c1dc2 upstream. If a client sends out a cap update dropping caps with the prior 'seq' just before an incoming cap revoke request, then the client may drop the revoke because it believes it's already released the requested capabilities. This causes the MDS to wait indefinitely for the client to respond to the revoke. It's therefore always a good idea to ack the cap revoke request with the bumped up 'seq'. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/61782 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23ceph: fix blindly expanding the readahead windowsXiubo Li
commit dc94bb8f271c079f69583d0f12a489aaf5202751 upstream. Blindly expanding the readahead windows will cause unneccessary pagecache thrashing and also will introduce the network workload. We should disable expanding the windows if the readahead is disabled and also shouldn't expand the windows too much. Expanding forward firstly instead of expanding backward for possible sequential reads. Bound `rreq->len` to the actual file size to restore the previous page cache usage. The posix_fadvise may change the maximum size of a file readahead. Cc: stable@vger.kernel.org Fixes: 49870056005c ("ceph: convert ceph_readpages to ceph_readahead") Link: https://lore.kernel.org/ceph-devel/20230504082510.247-1-sehuww@mail.scut.edu.cn Link: https://www.spinics.net/lists/ceph-users/msg76183.html Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Hu Weiwen <sehuww@mail.scut.edu.cn> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23ceph: add a dedicated private data for netfs rreqXiubo Li
commit 23ee27dce30e7d3091d6c3143b79f48dab6f9a3e upstream. We need to save the 'f_ra.ra_pages' to expand the readahead window later. Cc: stable@vger.kernel.org Fixes: 49870056005c ("ceph: convert ceph_readpages to ceph_readahead") Link: https://lore.kernel.org/ceph-devel/20230504082510.247-1-sehuww@mail.scut.edu.cn Link: https://www.spinics.net/lists/ceph-users/msg76183.html Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Hu Weiwen <sehuww@mail.scut.edu.cn> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23libceph: harden msgr2.1 frame segment length checksIlya Dryomov
commit a282a2f10539dce2aa619e71e1817570d557fc97 upstream. ceph_frame_desc::fd_lens is an int array. decode_preamble() thus effectively casts u32 -> int but the checks for segment lengths are written as if on unsigned values. While reading in HELLO or one of the AUTH frames (before authentication is completed), arithmetic in head_onwire_len() can get duped by negative ctrl_len and produce head_len which is less than CEPH_PREAMBLE_LEN but still positive. This would lead to a buffer overrun in prepare_read_control() as the preamble gets copied to the newly allocated buffer of size head_len. Cc: stable@vger.kernel.org Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)") Reported-by: Thelford Williams <thelford@google.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23firmware: stratix10-svc: Fix a potential resource leak in ↵Christophe JAILLET
svc_create_memory_pool() commit 1995f15590ca222f91193ed11461862b450abfd6 upstream. svc_create_memory_pool() is only called from stratix10_svc_drv_probe(). Most of resources in the probe are managed, but not this memremap() call. There is also no memunmap() call in the file. So switch to devm_memremap() to avoid a resource leak. Cc: stable@vger.kernel.org Fixes: 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver") Link: https://lore.kernel.org/all/783e9dfbba34e28505c9efa8bba41f97fd0fa1dc.1686109400.git.christophe.jaillet@wanadoo.fr/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Message-ID: <20230613211521.16366-1-dinguyen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23tty: serial: imx: fix rs485 rx after txMartin Fuzzey
commit 639949a7031e04c59ec91614eceb9543e9120f43 upstream. Since commit 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") RS485 reception no longer works after a transmission. The following scenario shows the problem: 1) Open a port in RS485 mode 2) Receive data from remote (OK) 3) Transmit data to remote (OK) 4) Receive data from remote (Nothing received) In RS485 mode, imx_uart_start_tx() calls imx_uart_stop_rx() and, when the transmission is complete, imx_uart_stop_tx() calls imx_uart_start_rx(). Since the above commit imx_uart_stop_rx() now sets the loopback bit but imx_uart_start_rx() does not clear it causing the hardware to remain in loopback mode and not receive external data. Fix this by moving the existing loopback disable code to a helper function and calling it from imx_uart_start_rx() too. Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") Cc: stable@vger.kernel.org Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230616104838.2729694-1-martin.fuzzey@flowbird.group Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when ↵Christophe JAILLET
iterating clk commit 832e231cff476102e8204a9e7bddfe5c6154a375 upstream. When the best clk is searched, we iterate over all possible clk. If we find a better match, the previous one, if any, needs to be freed. If a better match has already been found, we still need to free the new one, otherwise it leaks. Cc: <stable@vger.kernel.org> # v3.3+ Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Message-ID: <cf3e0053d2fc7391b2d906a86cd01a5ef15fb9dc.1686412569.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in ↵Christophe JAILLET
case of error commit a9c09546e903f1068acfa38e1ee18bded7114b37 upstream. If clk_get_rate() fails, the clk that has just been allocated needs to be freed. Cc: <stable@vger.kernel.org> # v3.3+ Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Message-ID: <e4baf6039368f52e5a5453982ddcb9a330fc689e.1686412569.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23serial: atmel: don't enable IRQs prematurelyDan Carpenter
commit 27a826837ec9a3e94cc44bd9328b8289b0fcecd7 upstream. The atmel_complete_tx_dma() function disables IRQs at the start of the function by calling spin_lock_irqsave(&port->lock, flags); There is no need to disable them a second time using the spin_lock_irq() function and, in fact, doing so is a bug because it will enable IRQs prematurely when we call spin_unlock_irq(). Just use spin_lock/unlock() instead without disabling or enabling IRQs. Fixes: 08f738be88bb ("serial: at91: add tx dma support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Richard Genoud <richard.genoud@gmail.com> Link: https://lore.kernel.org/r/cb7c39a9-c004-4673-92e1-be4e34b85368@moroto.mountain Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/ttm: Don't leak a resource on swapout move errorThomas Hellström
commit a590f03d8de7c4cb7ce4916dc7f2fd10711faabe upstream. If moving the bo to system for swapout failed, we were leaking a resource. Fix. Fixes: bfa3357ef9ab ("drm/ttm: allocate resource object instead of embedding it v2") Cc: Christian König <christian.koenig@amd.com> Cc: "Christian König" <ckoenig.leichtzumerken@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.14+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230626091450.14757-5-thomas.hellstrom@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/amdgpu: avoid restore process run into dead loop.gaba
commit 8a774fe912ff09e39c2d3a3589c729330113f388 upstream. In restore process worker, pinned BO cause update PTE fail, then the function re-schedule the restore_work. This will generate dead loop. Signed-off-by: gaba <gaba@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/amd/display: Add monitor specific edid quirkAurabindo Pillai
commit 613a7956deb3b1ffa2810c6d4c90ee9c3d743dbb upstream. Disable FAMS on a Samsung Odyssey G9 monitor. Experiments show that this monitor does not work well under some use cases, and is likely implementation specific bug on the monitor's firmware. Cc: stable@vger.kernel.org Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/amd/display: Correct `DMUB_FW_VERSION` macroMario Limonciello
commit 274d205cb59f43815542e04b42a9e6d0b9b95eff upstream. The `DMUB_FW_VERSION` macro has a mistake in that the revision field is off by one byte. The last byte is typically used for other purposes and not a revision. Cc: stable@vger.kernel.org Cc: Sean Wang <sean.ns.wang@amd.com> Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/amd/display: add a NULL pointer checkSung-huai Wang
commit 0f48a4b83610cb0e4e0bc487800ab69f51b4aca6 upstream. [Why & How] We have to check if stream is properly initialized before calling find_matching_pll(), otherwise we might end up trying to deferecence a NULL pointer. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Sung-huai Wang <danny.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/amd: Disable PSR-SU on Parade 0803 TCONMario Limonciello
commit 072030b1783056b5de8b0fac5303a5e9dbc6cfde upstream. A number of users have reported that there are random hangs occurring caused by PSR-SU specifically on panels that contain the parade 0803 TCON. Users have been able to work around the issue by disabling PSR entirely. To avoid these hangs, disable PSR-SU when this TCON is found. Cc: stable@vger.kernel.org Cc: Sean Wang <sean.ns.wang@amd.com> Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Suggested-by: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2443 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/amdgpu: fix clearing mappings for BOs that are always valid in VMSamuel Pitoiset
commit ea2c3c08554601b051d91403a241266e1cf490a5 upstream. Per VM BOs must be marked as moved or otherwise their ranges are not updated on use which might be necessary when the replace operation splits mappings. This fixes random GPU hangs when replacing sparse mappings from the userspace, while OP_MAP/OP_UNMAP works fine because always valid BOs are correctly handled there. Cc: stable@vger.kernel.org Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/amd/display: disable seamless boot if force_odm_combine is enabledLeo Chen
commit 26518b39181876064850209ecdab48c0ee5924b1 upstream. [Why & How] Having seamless boot on while forcing debug option ODM combine 2 to 1 will cause some corruptions because of some missing programmings. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/amd/display: Remove Phantom Pipe Check When Calculating K1 and K2Austin Zheng
commit 1966bbfdfe476d271b338336254854c5edd5a907 upstream. [Why] K1 and K2 not being setting properly when subVP is active. [How] Have phantom pipes use the same programing as the main pipes without checking the paired stream Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/amd/display: edp do not add non-edid timingsHersen Wu
commit 7a0e005c7957931689a327b2a4e7333a19f13f95 upstream. [Why] most edp support only timings from edid. applying non-edid timings, especially those timings out of edp bandwidth, may damage edp. [How] do not add non-edid timings for edp. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/amd/display: fix seamless odm transitionsDmytro Laktyushkin
commit 75c2b7ed080d7421157c03064be82275364136e7 upstream. Add missing programming and function pointers Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/rockchip: vop: Leave vblank enabled in self-refreshBrian Norris
commit 2bdba9d4a3baa758c2ca7f5b37b35c7b3391dc42 upstream. If we disable vblank when entering self-refresh, vblank APIs (like DRM_IOCTL_WAIT_VBLANK) no longer work. But user space is not aware when we enter self-refresh, so this appears to be an API violation -- that DRM_IOCTL_WAIT_VBLANK fails with EINVAL whenever the display is idle and enters self-refresh. The downstream driver used by many of these systems never used to disable vblank for PSR, and in fact, even upstream, we didn't do that until radically redesigning the state machine in commit 6c836d965bad ("drm/rockchip: Use the helpers for PSR"). Thus, it seems like a reasonable API fix to simply restore that behavior, and leave vblank enabled. Note that this appears to potentially unbalance the drm_crtc_vblank_{off,on}() calls in some cases, but: (a) drm_crtc_vblank_on() documents this as OK and (b) if I do the naive balancing, I find state machine issues such that we're not in sync properly; so it's easier to take advantage of (a). This issue was exposed by IGT's kms_vblank tests, and reported by KernelCI. The bug has been around a while (longer than KernelCI noticed), but was only exposed once self-refresh was bugfixed more recently, and so KernelCI could properly test it. Some other notes in: https://lore.kernel.org/dri-devel/Y6OCg9BPnJvimQLT@google.com/ Re: renesas/master bisection: igt-kms-rockchip.kms_vblank.pipe-A-wait-forked on rk3399-gru-kevin == Backporting notes: == Marking as 'Fixes' commit 6c836d965bad ("drm/rockchip: Use the helpers for PSR"), but it probably depends on commit bed030a49f3e ("drm/rockchip: Don't fully disable vop on self refresh") as well. We also need the previous patch ("drm/atomic: Allow vblank-enabled + self-refresh "disable""), of course. v3: * no update v2: * skip unnecessary lock/unlock Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR") Cc: <stable@vger.kernel.org> Reported-by: "kernelci.org bot" <bot@kernelci.org> Link: https://lore.kernel.org/dri-devel/Y5itf0+yNIQa6fU4@sirena.org.uk/ Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230109171809.v3.2.Ic07cba4ab9a7bd3618a9e4258b8f92ea7d10ae5a@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23drm/atomic: Allow vblank-enabled + self-refresh "disable"Brian Norris
commit 9d0e3cac3517942a6e00eeecfe583a98715edb16 upstream. The self-refresh helper framework overloads "disable" to sometimes mean "go into self-refresh mode," and this mode activates automatically (e.g., after some period of unchanging display output). In such cases, the display pipe is still considered "on", and user-space is not aware that we went into self-refresh mode. Thus, users may expect that vblank-related features (such as DRM_IOCTL_WAIT_VBLANK) still work properly. However, we trigger the WARN_ONCE() here if a CRTC driver tries to leave vblank enabled. Add a different expectation: that CRTCs *should* leave vblank enabled when going into self-refresh. This patch is preparation for another patch -- "drm/rockchip: vop: Leave vblank enabled in self-refresh" -- which resolves conflicts between the above self-refresh behavior and the API tests in IGT's kms_vblank test module. == Some alternatives discussed: == It's likely that on many display controllers, vblank interrupts will turn off when the CRTC is disabled, and so in some cases, self-refresh may not support vblank. To support such cases, we might consider additions to the generic helpers such that we fire vblank events based on a timer. However, there is currently only one driver using the common self-refresh helpers (i.e., rockchip), and at least as of commit bed030a49f3e ("drm/rockchip: Don't fully disable vop on self refresh"), the CRTC hardware is powered enough to continue to generate vblank interrupts. So we chose the simpler option of leaving vblank interrupts enabled. We can reevaluate this decision and perhaps augment the helpers if/when we gain a second driver that has different requirements. v3: * include discussion summary v2: * add 'ret != 0' warning case for self-refresh * describe failing test case and relation to drm/rockchip patch better Cc: <stable@vger.kernel.org> # dependency for "drm/rockchip: vop: Leave # vblank enabled in self-refresh" Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230109171809.v3.1.I3904f697863649eb1be540ecca147a66e42bfad7@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23scsi: lpfc: Fix double free in lpfc_cmpl_els_logo_acc() caused by ↵Justin Tee
lpfc_nlp_not_used() commit 97f975823f8196d970bd795087b514271214677a upstream. Smatch detected a double free path because lpfc_nlp_not_used() releases an ndlp object before reaching lpfc_nlp_put() at the end of lpfc_cmpl_els_logo_acc(). Remove the outdated lpfc_nlp_not_used() routine. In lpfc_mbx_cmpl_ns_reg_login(), replace the call with lpfc_nlp_put(). In lpfc_cmpl_els_logo_acc(), replace the call with lpfc_unreg_rpi() and keep the lpfc_nlp_put() at the end of the routine. If ndlp's rpi was registered, then lpfc_unreg_rpi()'s completion routine performs the final ndlp clean up after lpfc_nlp_put() is called from lpfc_cmpl_els_logo_acc(). Otherwise if ndlp has no rpi registered, the lpfc_nlp_put() at the end of lpfc_cmpl_els_logo_acc() is the final ndlp clean up. Fixes: 4430f7fd09ec ("scsi: lpfc: Rework locations of ndlp reference taking") Cc: <stable@vger.kernel.org> # v5.11+ Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/all/Y3OefhyyJNKH%2Fiaf@kili/ Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230417191558.83100-3-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23fs: dlm: fix mismatch of plock results from userspaceAlexander Aring
commit 57e2c2f2d94cfd551af91cedfa1af6d972487197 upstream. When a waiting plock request (F_SETLKW) is sent to userspace for processing (dlm_controld), the result is returned at a later time. That result could be incorrectly matched to a different waiting request in cases where the owner field is the same (e.g. different threads in a process.) This is fixed by comparing all the properties in the request and reply. The results for non-waiting plock requests are now matched based on list order because the results are returned in the same order they were sent. Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23fs: dlm: make F_SETLK use unkillable wait_eventAlexander Aring
commit 0f2b1cb89ccdbdcedf7143f4153a4da700a05f48 upstream. While a non-waiting posix lock request (F_SETLK) is waiting for user space processing (in dlm_controld), wait for that processing to complete with an unkillable wait_event(). This makes F_SETLK behave the same way for F_RDLCK, F_WRLCK and F_UNLCK. F_SETLKW continues to use wait_event_killable(). Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23fs: dlm: interrupt posix locks only when process is killedAlexander Aring
commit 59e45c758ca1b9893ac923dd63536da946ac333b upstream. If a posix lock request is waiting for a result from user space (dlm_controld), do not let it be interrupted unless the process is killed. This reverts commit a6b1533e9a57 ("dlm: make posix locks interruptible"). The problem with the interruptible change is that all locks were cleared on any signal interrupt. If a signal was received that did not terminate the process, the process could continue running after all its dlm posix locks had been cleared. A future patch will add cancelation to allow proper interruption. Cc: stable@vger.kernel.org Fixes: a6b1533e9a57 ("dlm: make posix locks interruptible") Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23fs: dlm: fix cleanup pending ops when interruptedAlexander Aring
commit c847f4e203046a2c93d8a1cf0348315c0b655a60 upstream. Immediately clean up a posix lock request if it is interrupted while waiting for a result from user space (dlm_controld.) This largely reverts the recent commit b92a4e3f86b1 ("fs: dlm: change posix lock sigint handling"). That previous commit attempted to defer lock cleanup to the point in time when a result from user space arrived. The deferred approach was not reliable because some dlm plock ops may not receive replies. Cc: stable@vger.kernel.org Fixes: b92a4e3f86b1 ("fs: dlm: change posix lock sigint handling") Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23fs: dlm: return positive pid value for F_GETLKAlexander Aring
commit 92655fbda5c05950a411eaabc19e025e86e2a291 upstream. The GETLK pid values have all been negated since commit 9d5b86ac13c5 ("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks"). Revert this for local pids, and leave in place negative pids for remote owners. Cc: stable@vger.kernel.org Fixes: 9d5b86ac13c5 ("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks") Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23dm init: add dm-mod.waitfor to wait for asynchronously probed block devicesPeter Korsgaard
commit 035641b01e72af4f6c6cf22a4bdb5d7dfc4e8e8e upstream. Just calling wait_for_device_probe() is not enough to ensure that asynchronously probed block devices are available (E.G. mmc, usb), so add a "dm-mod.waitfor=<device1>[,..,<deviceN>]" parameter to get dm-init to explicitly wait for specific block devices before initializing the tables with logic similar to the rootwait logic that was introduced with commit cc1ed7542c8c ("init: wait for asynchronously scanned block devices"). E.G. with dm-verity on mmc using: dm-mod.waitfor="PARTLABEL=hash-a,PARTLABEL=root-a" [ 0.671671] device-mapper: init: waiting for all devices to be available before creating mapped devices [ 0.671679] device-mapper: init: waiting for device PARTLABEL=hash-a ... [ 0.710695] mmc0: new HS200 MMC card at address 0001 [ 0.711158] mmcblk0: mmc0:0001 004GA0 3.69 GiB [ 0.715954] mmcblk0boot0: mmc0:0001 004GA0 partition 1 2.00 MiB [ 0.722085] mmcblk0boot1: mmc0:0001 004GA0 partition 2 2.00 MiB [ 0.728093] mmcblk0rpmb: mmc0:0001 004GA0 partition 3 512 KiB, chardev (249:0) [ 0.738274] mmcblk0: p1 p2 p3 p4 p5 p6 p7 [ 0.751282] device-mapper: init: waiting for device PARTLABEL=root-a ... [ 0.751306] device-mapper: init: all devices available [ 0.751683] device-mapper: verity: sha256 using implementation "sha256-generic" [ 0.759344] device-mapper: ioctl: dm-0 (vroot) is ready [ 0.766540] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23md/raid0: add discard support for the 'original' layoutJason Baron
commit e836007089ba8fdf24e636ef2b007651fb4582e6 upstream. We've found that using raid0 with the 'original' layout and discard enabled with different disk sizes (such that at least two zones are created) can result in data corruption. This is due to the fact that the discard handling in 'raid0_handle_discard()' assumes the 'alternate' layout. We've seen this corruption using ext4 but other filesystems are likely susceptible as well. More specifically, while multiple zones are necessary to create the corruption, the corruption may not occur with multiple zones if they layout in such a way the layout matches what the 'alternate' layout would have produced. Thus, not all raid0 devices with the 'original' layout, different size disks and discard enabled will encounter this corruption. The 3.14 kernel inadvertently changed the raid0 disk layout for different size disks. Thus, running a pre-3.14 kernel and post-3.14 kernel on the same raid0 array could corrupt data. This lead to the creation of the 'original' layout (to match the pre-3.14 layout) and the 'alternate' layout (to match the post 3.14 layout) in the 5.4 kernel time frame and an option to tell the kernel which layout to use (since it couldn't be autodetected). However, when the 'original' layout was added back to 5.4 discard support for the 'original' layout was not added leading this issue. I've been able to reliably reproduce the corruption with the following test case: 1. create raid0 array with different size disks using original layout 2. mkfs 3. mount -o discard 4. create lots of files 5. remove 1/2 the files 6. fstrim -a (or just the mount point for the raid0 array) 7. umount 8. fsck -fn /dev/md0 (spews all sorts of corruptions) Let's fix this by adding proper discard support to the 'original' layout. The fix 'maps' the 'original' layout disks to the order in which they are read/written such that we can compare the disks in the same way that the current 'alternate' layout does. A 'disk_shift' field is added to 'struct strip_zone'. This could be computed on the fly in raid0_handle_discard() but by adding this field, we save some computation in the discard path. Note we could also potentially fix this by re-ordering the disks in the zones that follow the first one, and then always read/writing them using the 'alternate' layout. However, that is seen as a more substantial change, and we are attempting the least invasive fix at this time to remedy the corruption. I've verified the change using the reproducer mentioned above. Typically, the corruption is seen after less than 3 iterations, while the patch has run 500+ iterations. Cc: NeilBrown <neilb@suse.de> Cc: Song Liu <song@kernel.org> Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Cc: stable@vger.kernel.org Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230623180523.1901230-1-jbaron@akamai.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23mfd: pm8008: Fix module autoloadingJohan Hovold
commit d420c9886f5369697047b880221789bf0054e438 upstream. Add the missing module device table alias to that the driver can be autoloaded when built as a module. Cc: stable@vger.kernel.org # 5.14 Fixes: 6b149f3310a4 ("mfd: pm8008: Add driver for QCOM PM8008 PMIC") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230526091646.17318-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23misc: pci_endpoint_test: Re-init completion for every testDamien Le Moal
commit fb620ae73b70c2f57b9d3e911fc24c024ba2324f upstream. The irq_raised completion used to detect the end of a test case is initialized when the test device is probed, but never reinitialized again before a test case. As a result, the irq_raised completion synchronization is effective only for the first ioctl test case executed. Any subsequent call to wait_for_completion() by another ioctl() call will immediately return, potentially too early, leading to false positive failures. Fix this by reinitializing the irq_raised completion before starting a new ioctl() test command. Link: https://lore.kernel.org/r/20230415023542.77601-16-dlemoal@kernel.org Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23misc: pci_endpoint_test: Free IRQs before removing the deviceDamien Le Moal
commit f61b7634a3249d12b9daa36ffbdb9965b6f24c6c upstream. In pci_endpoint_test_remove(), freeing the IRQs after removing the device creates a small race window for IRQs to be received with the test device memory already released, causing the IRQ handler to access invalid memory, resulting in an oops. Free the device IRQs before removing the device to avoid this issue. Link: https://lore.kernel.org/r/20230415023542.77601-15-dlemoal@kernel.org Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Set address alignment for endpoint modeDamien Le Moal
commit 7e6689b34a815bd379dfdbe9855d36f395ef056c upstream. The address translation unit of the rockchip EP controller does not use the lower 8 bits of a PCIe-space address to map local memory. Thus we must set the align feature field to 256 to let the user know about this constraint. Link: https://lore.kernel.org/r/20230418074700.1083505-12-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Use u32 variable to access 32-bit registersRick Wertenbroek
commit 8962b2cb39119cbda4fc69a1f83957824f102f81 upstream. Previously u16 variables were used to access 32-bit registers, this resulted in not all of the data being read from the registers. Also the left shift of more than 16-bits would result in moving data out of the variable. Use u32 variables to access 32-bit registers Link: https://lore.kernel.org/r/20230418074700.1083505-10-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint coreRick Wertenbroek
commit 166e89d99dd85a856343cca51eee781b793801f2 upstream. Fix legacy IRQ generation for RK3399 PCIe endpoint core according to the technical reference manual (TRM). Assert and deassert legacy interrupt (INTx) through the legacy interrupt control register ("PCIE_CLIENT_LEGACY_INT_CTRL") instead of manually generating a PCIe message. The generation of the legacy interrupt was tested and validated with the PCIe endpoint test driver. Link: https://lore.kernel.org/r/20230418074700.1083505-8-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be lockedRick Wertenbroek
commit 9dd3c7c4c8c3f7f010d9cdb7c3f42506d93c9527 upstream. The RK3399 PCIe controller should wait until the PHY PLLs are locked. Add poll and timeout to wait for PHY PLLs to be locked. If they cannot be locked generate error message and jump to error handler. Accessing registers in the PHY clock domain when PLLs are not locked causes hang The PHY PLLs status is checked through a side channel register. This is documented in the TRM section 17.5.8.1 "PCIe Initialization Sequence". Link: https://lore.kernel.org/r/20230418074700.1083505-5-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Write PCI Device ID to correct registerRick Wertenbroek
commit 1f1c42ece18de365c976a060f3c8eb481b038e3a upstream. Write PCI Device ID (DID) to the correct register. The Device ID was not updated through the correct register. Device ID was written to a read-only register and therefore did not work. The Device ID is now set through the correct register. This is documented in the RK3399 TRM section 17.6.6.1.1 Link: https://lore.kernel.org/r/20230418074700.1083505-3-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Assert PCI Configuration Enable bit after probeRick Wertenbroek
commit f397fd4ac1fa3afcabd8cee030f953ccaed2a364 upstream. Assert PCI Configuration Enable bit after probe. When this bit is left to 0 in the endpoint mode, the RK3399 PCIe endpoint core will generate configuration request retry status (CRS) messages back to the root complex. Assert this bit after probe to allow the RK3399 PCIe endpoint core to reply to configuration requests from the root complex. This is documented in section 17.5.8.1.2 of the RK3399 TRM. Link: https://lore.kernel.org/r/20230418074700.1083505-4-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: epf-test: Fix DMA transfer completion detectionDamien Le Moal
commit 933f31a2fe1f20e5b1ee065579f652cd1b317183 upstream. pci_epf_test_data_transfer() and pci_epf_test_dma_callback() are not handling DMA transfer completion correctly, leading to completion notifications to the RC side that are too early. This problem can be detected when the RC side is running an IOMMU with messages such as: pci-endpoint-test 0000:0b:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x001c address=0xfff00000 flags=0x0000] When running the pcitest.sh tests: the address used for a previous test transfer generates the above error while the next test transfer is running. Fix this by testing the DMA transfer status in pci_epf_test_dma_callback() and notifying the completion only when the transfer status is DMA_COMPLETE or DMA_ERROR. Furthermore, in pci_epf_test_data_transfer(), be paranoid and check again the transfer status and always call dmaengine_terminate_sync() before returning. Link: https://lore.kernel.org/r/20230415023542.77601-5-dlemoal@kernel.org Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: epf-test: Fix DMA transfer completion initializationDamien Le Moal
commit 4aca56f8eae8aa44867ddd6aa107e06f7613226f upstream. Reinitialize the transfer_complete DMA transfer completion before calling tx_submit(), to avoid seeing the DMA transfer complete before the completion is initialized, thus potentially losing the completion notification. Link: https://lore.kernel.org/r/20230415023542.77601-4-dlemoal@kernel.org Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: qcom: Disable write access to read only registers for IP v2.3.3Manivannan Sadhasivam
commit a33d700e8eea76c62120cb3dbf5e01328f18319a upstream. In the post init sequence of v2.9.0, write access to read only registers are not disabled after updating the registers. Fix it by disabling the access after register update. Link: https://lore.kernel.org/r/20230619150408.8468-2-manivannan.sadhasivam@linaro.org Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 22:54:41 +0000