Age | Commit message (Collapse) | Author |
|
snd_soc_card has many bool, but it can be bit field.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87d06o25l2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This series provides the following updates to the Intel machine driver
Kconfig:
1. The first patch adds the explicit dependency on GPIOLIB when
SND_SOC_DMIC is selected.
2. SND_SOC_SOF_HDA_AUDIO_CODEC is required for using the legacy
HDA codec driver for HDMI support in SOF. The last 3 three patches
make the required changes to account for this.
changes since v1:
first patch for DMIC was merged already
rebase for HDMI on top of Arnd's RT5682 changes.
Libin Yang (3):
ASoC: intel: add depends on SND_SOC_SOF_HDA_AUDIO_CODEC for common
hdmi
ASoC: sof-sdw: remove CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC condition
ASoC: sof_pcm512x: remove CONFIG_SND_HDA_CODEC_HDMI condition
sound/soc/intel/boards/Kconfig | 20 ++++++++++----------
sound/soc/intel/boards/sof_pcm512x.c | 9 ---------
sound/soc/intel/boards/sof_sdw.c | 8 --------
sound/soc/intel/boards/sof_sdw_hdmi.c | 7 -------
4 files changed, 10 insertions(+), 34 deletions(-)
base-commit: 89d73ccab20a684d8446cea4d8ac6a2608c8d390
--
2.20.1
|
|
Document RZ/G1H (R8A7742) SoC bindings.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1590526904-13855-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As CONFIG_SND_HDA_CODEC_HDMI is always enabled in sof_pcm512x,
let's remove the test of CONFIG_SND_HDA_CODEC_HDMI in the
sof_pcm512x driver.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200529193547.6077-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC is always enabled in sof-soundwire
driver, let's remove the test of CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC
in the code.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200529193547.6077-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the driver uses common hdmi, SND_SOC_SOF_HDA_AUDIO_CODEC is required
to be enabled. Otherwise, the legacy hda codec driver will not be used.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200529193547.6077-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for using generic codec driver with SOF. Generic driver
is used if:
- snd_sof_intel_hda_common.hda_model="generic" is set, or
- fallback if no other codec driver is found
The implementation is aligned with snd-hda-intel driver, and fixes audio
support for systems like Acer Swift 3 SF314-57G, on which this issue was
originally reported.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/1807
BugLink: https://bugs.launchpad.net/bugs/1877757
Link: https://lore.kernel.org/r/20200529160358.12134-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the allmodconfig option, CONFIG_SND_SOC_SOF_BAYTRAIL is disabled
due to mutual exclusion with the legacy driver. This generates
'defined by not used' warnings.
suspend/resume/remove are only supported for Baytrail for now, so move
the code under the CONFIG_SND_SOC_SOF_BAYTRAIL checks.
Fixes: ddcccd543f5d ("ASoC: SOF: Intel: byt: Add PM callbacks")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200529150408.17236-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
during mixer update
FE state is SND_SOC_DPCM_STATE_PREPARE now, BE1 is
used by FE.
Later when new BE2 is added to FE by mixer update,
it will call dpcm_run_update_startup() to update
BE2's state, but unfortunately BE2 .prepare() meets
error, it will disconnect all non started BE.
This make BE1 dai skip .hw_free() and .shutdown(),
and the BE1 users will never decrease to zero.
Signed-off-by: zhucancan <zhucancan@vivo.com>
Link: https://lore.kernel.org/r/ALMAWwB5CP9aAcKXCU5FzqqF.1.1590747164172.Hmail.zhucancan@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Recent changes result in multiple dmesg traces such as:
[ 14.410435] Audio Port: ASoC: error at snd_soc_link_startup on Audio
Port: 1
[ 14.410446] sst-mfld-platform sst-mfld-platform: ASoC: error at
snd_soc_dai_startup on media-cpu-dai: 1
These messages are not really errors, when dai and dai-link callbacks
return the value of e.g. snd_pcm_hw_constraint_single() the result is
"Positive if the value is changed, zero if it's not changed, or a
negative error code"
Add a simple test to skip the checks for positive returned values
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200529123613.13447-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
<yang.jie@linux.intel.com>:
This small series is to optimize the header logging during the topology
parsing. This is verified work fine on both SOF and SST drivers.
Change History:
v3:
- Remove using the separated soc_pass_load() function and merge it to the
soc_tplg_load_header() body.
- Add more Tested-by tags.
v2:
- Change the internal used array to be 'static' to fix the issue
reported by: kbuild test robot <lkp@intel.com>
- Add testing coverage including Intel SST driver also.
v1:
- Initial version.
Keyon Jie (2):
ASoC: topology: refine and log the header in the correct pass
ASoC: topology: remove the redundant pass checks
sound/soc/soc-topology.c | 96 ++++++++++++++++------------------------
1 file changed, 38 insertions(+), 58 deletions(-)
--
2.25.1
|
|
fsl_asrc_dma_hw_params() invokes dma_request_channel() or
fsl_asrc_get_dma_channel(), which returns a reference of the specified
dma_chan object to "pair->dma_chan[dir]" with increased refcnt.
The reference counting issue happens in one exception handling path of
fsl_asrc_dma_hw_params(). When config DMA channel failed for Back-End,
the function forgets to decrease the refcnt increased by
dma_request_channel() or fsl_asrc_get_dma_channel(), causing a refcnt
leak.
Fix this issue by calling dma_release_channel() when config DMA channel
failed.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1590415966-52416-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Avoid noise under bypass boost mode.
Signed-off-by: derek.fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1590750310-30085-1-git-send-email-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix dt-binding-check issue
ti,gpi-config:0:0: 4 is greater than the maximum of 1
ti,gpi-config:0:1: 5 is greater than the maximum of 1
ti,gpi-config:0:2: 6 is greater than the maximum of 1
ti,gpi-config:0:3: 7 is greater than the maximum of 1
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200528144711.18065-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200529012230.5863-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As we have check the 'pass' in the soc_elem_pass_load(), so no need to
check it again in each specific elem_load function, at the same time,
the tplg->pos will be reset to the next header base when the pass is
mismatched, so the increasing of the tplg->pos in these cases made no
sense. Here remove all of them.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Tested-by: Vamshi Kerishna Gopal <vamshi.krishna.gopal@intel.com>
Tested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200527022801.336264-3-yang.jie@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The check (tplg->pass == le32_to_cpu(hdr->type)) makes no sense as it is
comparing two different enums, refine the element loading functions, and
log the information when the header is being parsed in the corresponding
parsing pass.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Tested-by: Vamshi Kerishna Gopal <vamshi.krishna.gopal@intel.com>
Tested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200527022801.336264-2-yang.jie@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In DMA pointer the initialzation of instance is of no use.
In fact it will reinitialize the instance variable which is already
opened and functional.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/1590652337-21587-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sta32x_probe() forgets to call undo functions when it fails, add
the missed function calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20200528102004.911653-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With SND_SOC_AMD_RV_RT5682_MACH using the i2c version of the
driver, we can easily get a build failure when I2C is built-in
but soundwire is not:
WARNING: unmet direct dependencies detected for SND_SOC_RT5682
Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (I2C [=y] || SOUNDWIRE [=m]) && (SOUNDWIRE [=m] || !SOUNDWIRE [=m]) && (I2C [=y] || !I2C [=y])
Selected by [y]:
- SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y]
Selected by [m]:
- SND_SOC_RT5682_SDW [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SOUNDWIRE [=m] && (I2C [=y] || !I2C [=y])
Rework the driver to have three separate modules, with the
main driver just dealing with the common bits and the actual
initialization as part of i2c and sdw specific modules.
The conversion is fairly mechanical to keep it easy to review,
i.e. it moves code around with the minimal required renaming
and changes.
Fixes: 6b8e4e7db3cd ("ASoC: amd: Add machine driver for Raven based platform")
Fixes: fd443a20c2f0 ("ASoC: rt5682: fix I2C/Soundwire dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200528091851.2889754-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The nau8810 driver can also compatible with nau8812 and nau8814.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20200528070510.29959-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All boards with Ingenic SoCs probe with devicetree already, we have no
use for a non-devicetree path.
This solves some compilation warnings that were caused by unused
variables in the case where CONFIG_OF was disabled.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200523125455.12392-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This long-overdue patchset adds missing system suspend/resume support
and hardens the IPC to solve module load/unload issues on specific
devices such as Cyan Chromebook. With this series SOF is finally
iso-feature with the legacy driver. Thanks to Ranjani and Keyon for
the basic patches and Enric for testing.
The last part needed for Baytrail/Cherrytrail is simplification of the
driver/card names and turn-key UCM support (on-going work with
Jaroslav).
Keyon Jie (1):
ASoC: SOF: Intel: BYT: harden IPC initialization and handling
Pierre-Louis Bossart (3):
ASoC: Intel: bytcr_rt5640/51: remove .ignore_suspend
ASoC: Intel: byt/cht: add .pm_ops
ASoC: SOF: Intel: BYT: mask BUSY or DONE interrupts in handler
Ranjani Sridharan (4):
ASoC: SOF: Intel: byt: Add PM callbacks
ASoC: SOF: pm: handle resume on legacy Intel platforms
ASoC: SOF: ipc: ignore DSP replies received when they are not expected
ASoC: SOF: Intel: BYT: add .remove op
sound/soc/intel/boards/bytcht_cx2072x.c | 3 +
sound/soc/intel/boards/bytcht_da7213.c | 3 +
sound/soc/intel/boards/bytcht_es8316.c | 3 +
sound/soc/intel/boards/bytcr_rt5640.c | 7 +-
sound/soc/intel/boards/bytcr_rt5651.c | 6 +-
sound/soc/intel/boards/cht_bsw_max98090_ti.c | 3 +
sound/soc/intel/boards/cht_bsw_nau8824.c | 3 +
sound/soc/intel/boards/cht_bsw_rt5645.c | 3 +
sound/soc/intel/boards/cht_bsw_rt5672.c | 3 +
sound/soc/sof/intel/byt.c | 116 ++++++++++++++-----
sound/soc/sof/ipc.c | 9 +-
sound/soc/sof/pm.c | 8 +-
sound/soc/sof/sof-priv.h | 2 +-
13 files changed, 122 insertions(+), 47 deletions(-)
base-commit: 0d71a5cf691a8226151ceeb79fb872925f053df5
--
2.20.1
|
|
In case of error, the function devm_ioremap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200527030210.124393-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix the warnings when using the W=1 compiler flag.
sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_reset’:
sound/soc/codecs/tlv320adcx140.c:570:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
570 | int ret = 0;
| ^~~
This was set but only used in case where the reset GPIO is not defined.
Have the function return the value of ret.
sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_codec_probe’:
sound/soc/codecs/tlv320adcx140.c:778:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
778 | if (bias_source < ADCX140_MIC_BIAS_VAL_VREF ||
| ^
sound/soc/codecs/tlv320adcx140.c:789:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
789 | if (vref_source < ADCX140_MIC_BIAS_VREF_275V ||
This condition will not occur since if the dt property is not set then
the *_source variable is set to the default value. So there is no way
that *_source can be less then 0. Which is what each #define is set to.
The code just needs to make sure that the dt property is not out of the
upper bounds.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200526175247.15309-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200527024625.9937-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200527084326.4131-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support to configure the GPI pins to the specific configuration.
The pins can be disabled or be configured as data input for any of the
digital mic channels. In addition the GPI can be used a a general
purpose input, a Master clock input or an ASI input for daisy chaining
devices.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200526200917.10385-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an array property that configures the General Purpose Input (GPI)
register. The device has 4 GPI pins and each pin can be configured in 1
of 7 different ways.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200526200917.10385-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200527084610.4790-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On probe and reset, we should not touch the SHIM_IMRD register since
it is configured by firmware.
The driver only configures SHIM_IMRX with the BUSY interrupt enabled
by default and DONE interrupt disabled. When sending an IPC message,
the DONE interrupt is enabled until the DSP response is provided.
This sequence hardens the IPC communication and avoid
interrupt-related issues when adding/removing modules or during system
suspend-resume transitions.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200526203640.25980-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DSP may send the same interrupt multiple times before it's handled
in the interrupt thread. Rather than masking it in the thread, mask it
in the handler directly.
This patch also removes useless checks that cannot happen, and masks
that are set don't need to be re-tested.
Suggested-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/1492
Link: https://lore.kernel.org/r/20200526203640.25980-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add .remove op that disables interrupts and reset the DSP
for BYT and CHT platforms.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200526203640.25980-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We currently ignore the reply messages from the DSP
when they are not expected but call it out as an error.
Change the error message to a debug message.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200526203640.25980-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add required .pm_ops to support suspend/resume on baytrail/cherrytrail
machines.
This .pm_ops is conditionally-added to avoid impacting the legacy
driver where power management is handled differently.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200526203640.25980-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Low-power playback was never enabled on Baytrail devices, remove what
looks like copy/paste from other machine drivers which were never
submitted upstream.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200526203640.25980-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new case when set_power_state() is not supported, e.g. for Intel
Baytrail/Cherrytrail legacy platforms.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200526203640.25980-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the PM callbacks for BYT/CHT platforms.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200526203640.25980-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200525071732.5887-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Function "pm_runtime_get_sync()" is not handled by "pm_runtime_put()"
if "PTR_ERR(rst) == -EPROBE_DEFER". Fix this issue by adding
"pm_runtime_put()" into this error path.
Fixes: f65bb92ca12e ("ASoC: img-i2s-in: Add runtime PM")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200525055011.31925-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When clk_set_parent() returns an error code, a pairing
runtime PM usage counter increment is needed to keep the
counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200525085848.4227-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/codecs/zl38060.c:298:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes: 52e8a94baf90 ("ASoC: Add initial ZL38060 driver")
Signed-off-by: kbuild test robot <lkp@intel.com>
CC: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20200525184351.GA37386@5cf39b9a5cc3
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
<kuninori.morimoto.gx@renesas.com>:
Hi Mark
Current ALSA SoC is handling dai_link related operation,
but it is implmemented directly without using function/macro,
and at random place.
This v4 patch-set creates new snd_soc_link_xxx() functions
which handles dai_link related operation,
and implmement these at new soc-link.c.
v3 -> v4
- add Reviewed-by from Ranjani and Pierre-Louis
- fix bisection error at [2/7]
v2 -> v3
- add missing #include <sound/soc-link.h> in soc-link.c
v1 -> v2
- #include <sound/soc-link.h> is added on each c source file
instead of soc.h
- not have extra error message after snd_soc_link_xxx(),
because it already indicate it via snc_link_ret()
- snd_soc_link_compr_xxx() doesn't have rtd parameter,
because it can be created from cstream
Link: https://lore.kernel.org/r/87lflk4yk3.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/874ksa59wc.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/877dx868op.wl-kuninori.morimoto.gx@renesas.com
Kuninori Morimoto (7):
ASoC: add soc-link.c
ASoC: soc-link: move soc_rtd_xxx()
ASoC: soc-link: remove unneeded parameter from snd_soc_link_xxx()
ASoC: soc-link: add snd_soc_link_be_hw_params_fixup()
ASoC: soc-link: add snd_soc_link_compr_startup()
ASoC: soc-link: add snd_soc_link_compr_shutdown()
ASoC: soc-link: add snd_soc_link_compr_set_params()
include/sound/soc-link.h | 27 +++++++
sound/soc/Makefile | 2 +-
sound/soc/soc-compress.c | 46 ++++--------
sound/soc/soc-core.c | 18 ++---
sound/soc/soc-dai.c | 9 ++-
sound/soc/soc-link.c | 150 +++++++++++++++++++++++++++++++++++++++
sound/soc/soc-pcm.c | 86 ++++------------------
7 files changed, 219 insertions(+), 119 deletions(-)
create mode 100644 include/sound/soc-link.h
create mode 100644 sound/soc/soc-link.c
--
2.17.1
Thank you for your help !!
Best regards
---
Kuninori Morimoto
|
|
Vehmanen <kai.vehmanen@linux.intel.com>:
Hello,
extended firmware manifest is a method to retrieve capabilities
directly from the firmware file instead of routing the information via
the DSP and reading it back via IPC (latter mechanism still supported
but will be deprecated).
This feature was briefly merged to 5.8 with the series sent on
2020-Apr-15, but due to a regression hit with exporting uapi headers,
the patches got dropped.
Here's an update with the uapi header issue fixed, rebased to latest
'for-5.8' and a few minor fixes. This has been sitting in sof-dev for
some weeks and no further issues have been found. We also added
a check for the uapi-export case to SOF CI, so such errors would
not slip through again in the future.
Tooling support to create firmware files with an extended header
is available in SOF firmware repository (see the rimage tool) and
this part is already merged.
Karol Trzcinski (5):
ASoC: SOF: loader: Adjust validation condition for fw_offset
ASoC: SOF: Introduce extended manifest
ASoC: SOF: ext_manifest: parse firmware version
ASoC: SOF: ext_manifest: parse windows
ASoC: SOF: ext_manifest: parse compiler version
include/sound/sof/ext_manifest.h | 95 +++++++++++++++++
sound/soc/sof/intel/hda-loader.c | 2 +-
sound/soc/sof/loader.c | 176 ++++++++++++++++++++++++++++++-
3 files changed, 269 insertions(+), 4 deletions(-)
create mode 100644 include/sound/sof/ext_manifest.h
--
2.26.2
|
|
With dedicated power domain for asrc, power can be disabled after
probe and pm runtime suspend, then the value of all registers need to
be restored in pm runtime resume. So we can merge suspend/resume function
to runtime_suspend/resume function and enable regcache only in end of
probe.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1590141444-28668-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Omit unused initialized value, because 'ret' will be assigined
by the function snd_soc_component_read().
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200513111408.11452-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
sound/soc/fsl/fsl_asrc.c:557:18: warning: no previous prototype for function 'fsl_asrc_get_dma_channel' [-Wmissing-prototypes]
struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir)
^
sound/soc/fsl/fsl_asrc.c:557:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir)
^
static
Fixes: be7bd03f0201 ("ASoC: fsl_asrc: Move common definition to fsl_asrc_common")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: shengjiu wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1590397412-12966-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is the initial amplifier driver for max98390.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steve Lee <steves.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20200518005038.21074-1-steves.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The compiler version and description can be extracted from the
extended manifest content. This information known at build time
does not need to be provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200520165911.21696-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The window description can be extracted from the extended manifest
content. This information known at build time does not need to be
provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200520165911.21696-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|