| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late changes from Arnd Bergmann:
"These are changes that arrived a little late before the merge window
or that have multiple dependencies on previous branches so they did
not fit into one of the earlier ones. There are 10 branches merged
here, a total of 39 non-merge commits. Contents are a mixed bag for
the above reasons:
* Two new SoC platforms: ST microelectronics stixxxx and the TI
'Nspire' graphing calculator. These should have been in the 'soc'
branch but were a little late
* Support for the Exynos 5420 variant in mach-exynos, which is based
on the other exynos branches to avoid conflicts.
* Various small changes for sh-mobile, ux500 and davinci
* Common clk support for MSM"
* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
ARM: ux500: bail out on alien cpus
ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins
serial: sh-sci: Initialise variables before access in sci_set_termios()
ARM: stih41x: Add B2020 board support
ARM: stih41x: Add B2000 board support
ARM: sti: Add DEBUG_LL console support
ARM: sti: Add STiH416 SOC support
ARM: sti: Add STiH415 SOC support
ARM: msm: Migrate to common clock framework
ARM: msm: Make proc_comm clock control into a platform driver
ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver
ARM: msm: Remove clock-7x30.h include file
ARM: msm: Remove custom clk_set_{max,min}_rate() API
ARM: msm: Remove custom clk_set_flags() API
msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()
msm: iommu: Convert to clk_prepare/unprepare
msm_sdcc: Convert to clk_prepare/unprepare
usb: otg: msm: Convert to clk_prepare/unprepare
msm_serial: Use devm_clk_get() and properly return errors
msm_serial: Convert to clk_prepare/unprepare
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver specific changes from Arnd Bergmann:
"These changes are all driver specific and cross over between arm-soc
contents and some other subsystem, in these cases cpufreq, crypto,
dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
these changes merged through arm-soc.
As we proceed to untangle the dependencies between platform code and
driver code, the amount of changes in this category is fortunately
shrinking, for 3.11 we have 16 branches here and 101 non-merge
changesets, the majority of which are for the stedma40 dma engine
driver used in the ux500 platform. Cleaning up that code touches
multiple subsystems, but gets rid of the dependency in the end.
The mailbox code moved out from mach-omap2 to drivers/mailbox is an
intermediate step and is still omap specific at the moment. Patches
exist to generalize the subsystem and add other drivers with the same
API, but those did not make it for 3.11."
* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
crypto: ux500: use dmaengine_submit API
crypto: ux500: use dmaengine_prep_slave_sg API
crypto: ux500: use dmaengine_device_control API
crypto: ux500/crypt: add missing __iomem qualifiers
crypto: ux500/hash: add missing static qualifiers
crypto: ux500/hash: use readl on iomem addresses
dmaengine: ste_dma40: Declare memcpy config as static
ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
ARM: ux500: Provide a AB8500 GPIO Device Tree node
gpio: rcar: fix gpio_rcar_of_table
gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
gpio-rcar: Reference core gpio documentation in the DT bindings
clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
ARM: dts: Update Samsung I2S documentation
ARM: dts: add clock provider information for i2s controllers in Exynos5250
ARM: dts: add Exynos audio subsystem clock controller node
clk: samsung: register audio subsystem clocks using common clock framework
ARM: dts: use #include for all device trees for Samsung
pinctrl: s3c24xx: use correct header for chained_irq functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree changes from Arnd Bergmann:
"These changes from 30 individual branches for the most part update
device tree files, but there are also a few source code changes that
have crept in this time, usually in order to atomically move over a
driver from using hardcoded data to DT probing.
A number of platforms change their DT files to use the C preprocessor,
which is causing a bit of churn, but that is hopefully only this once"
* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
ARM: at91: dt: rm9200ek: add spi support
ARM: at91: dt: rm9200: add spi support
ARM: at91/DT: at91sam9n12: add SPI DMA client infos
ARM: at91/DT: sama5d3: add SPI DMA client infos
ARM: at91/DT: fix SPI compatibility string
ARM: Kirkwood: Fix the internal register ranges translation
ARM: dts: bcm281xx: change comment to C89 style
ARM: mmc: bcm281xx SDHCI driver (dt mods)
ARM: nomadik: add the new clocks to the device tree
clk: nomadik: implement the Nomadik clocks properly
ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
ARM: dts: omap4-panda: Fix DVI EDID reads
ARM: dts: omap4-panda: Add USB Host support
arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
ARM: shmobile: irqpin: add a DT property to enable masking on parent
ARM: dts: AM43x EPOS EVM support
ARM: dts: OMAP5: Add bandgap DT entry
ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC board specific changes from Arnd Bergmann:
"These are 18 branches on 9 platforms with board specific changes,
mostly for defconfig files, but nothing really exciting in here.
Since the shmobile platform still uses board files for some of the
newer machines, we get a few changes there as the result of drivers
getting enabled for those boards. This causes some conflicts with
contents getting added from multiple branches in sh-mobile specific
files. Renesas is putting a lot of work into migrating to device-tree
based setup, which will make all those files obsolete in the future
and avoid both the conflicts and the need to have these files in the
first place."
* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
arm: multi_v7_defconfig: Enable initrd/initramfs support
arm: multi_v7_defconfig: Enable Zynq UART driver
ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV
ARM: OMAP1: nokia770: enable Tahvo
ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN
arm: omap: board-overo: reset GPIO for SMSC911x
ARM: shmobile: BOCK-W: change Ether device name
ARM: ux500: board-mop500: remove unused pin modes
ARM: shmobile: bockw: add MMCIF support
ARM: shmobile: bockw: add SPI FLASH support
ARM: shmobile: bockw: add I2C device support
ARM: shmobile: BOCK-W: add Ether support
ARM: tegra: defconfig updates
ARM: shmobile: bockw defconfig: add MMCIF support
ARM: shmobile: bockw defconfig: add M25P80 support
ARM: shmobile: bockw defconfig: add RTC RX8581 support
ARM: shmobile: marzen: keep local function as static
ARM: shmobile: bockw: add SDHI0 support
ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC
ARM: shmobile: lager: support GPIO switches
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC specific changes from Arnd Bergmann:
"These changes are all to SoC-specific code, a total of 33 branches on
17 platforms were pulled into this. Like last time, Renesas sh-mobile
is now the platform with the most changes, followed by OMAP and
EXYNOS.
Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
branch, both containing almost no platform specific code at all, since
they are using generic subsystem interfaces for clocks, pinctrl,
interrupts etc. The device drivers are getting merged through the
respective subsystem maintainer trees.
One more SoC (u300) is now multiplatform capable and several others
(shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
towards that goal with this series but need more work.
Also noteworthy is the work on PCI here, which is traditionally part
of the SoC specific code. With the changes done by Thomas Petazzoni,
we can now more easily have PCI host controller drivers as loadable
modules and keep them separate from the platform code in
drivers/pci/host. This has already led to the discovery that three
platforms (exynos, spear and imx) are actually using an identical PCIe
host controller and will be able to share a driver once support for
spear and imx is added."
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
ARM: integrator: let pciv3 use mem/premem from device tree
ARM: integrator: set local side PCI addresses right
ARM: dts: Add pcie controller node for exynos5440-ssdk5440
ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
ARM: EXYNOS: Enable PCIe support for Exynos5440
pci: Add PCIe driver for Samsung Exynos
ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
ARM: keystone: Move CPU bringup code to dedicated asm file
ARM: multiplatform: always pick one CPU type
ARM: imx: select syscon for IMX6SL
ARM: keystone: select ARM_ERRATA_798181 only for SMP
ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
ARM: OMAP2+: AM43x: resolve SMP related build error
dmaengine: edma: enable build for AM33XX
ARM: edma: Add EDMA crossbar event mux support
ARM: edma: Add DT and runtime PM support to the private EDMA API
dmaengine: edma: Add TI EDMA device tree binding
arm: add basic support for Rockchip RK3066a boards
arm: add debug uarts for rockchip rk29xx and rk3xxx series
arm: Add basic clocks for Rockchip rk3066a SoCs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"This contains cleanups as preparation for other branches adding new
features, we pulled 16 branches for 9 platforms into this one.
Most notable here is the removal of support for ATAGS based OMAP4
systems. Since all OMAP4 machines are fully functional with DT based
booting in 3.10, we can remove a lot of code here.
Also noteworthy is Maxime Ripard's cleanup of the machine descriptors,
which means we need no machine descriptors in a lot more cases and can
boot additional machines by just having the respective device drivers
enabled."
* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
ARM: picoxcell: remove .nr_irqs reference
ARM: s5p64x0: avoid build warning for uncompress.h
ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header
ARM: SAMSUNG: Remove legacy watchdog reset code
ARM: SAMSUNG: Let platforms use the new watchdog reset driver
ARM: SAMSUNG: Add watchdog reset driver
ARM: SAMSUNG: Use local definitions of watchdog registers
watchdog: s3c2410_wdt: Use local register definitions
ARM: S5P64X0: Use common uncompress.h part for plat-samsung
ARM: SAMSUNG: Consolidate uncompress subroutine
ARM: at91: drop rm9200dk board support
ARM: dts: msm: Fix merge resolution
ARM: OMAP1: Remove dma.h
ARM: OMAP1: Remove legacy irda.h and irda setup from board files
ARM: OMAP1: Remove duplicated DMA channel definitions
ARM: OMAP1: Remove McBSP DMA channel definitions
ARM: OMAP2+: Remove dma.h
ARM: OMAP2+: hwmod: Remove remaining DMA channel definitions
ARM: OMAP2+: Remove duplicated DMA channel definitions
ARM: OMAP2+: Remove AES crypto device DMA channel definitions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-cricitical bug fixes from Arnd Bergmann:
"These are various bug fixes that were not considered important enough
for merging into 3.10.
The majority of the ARM fixes are for the OMAP and at91 platforms, and
there is another set of bug fixes for device drivers that resolve
'randconfig' build errors and that the subsystem maintainers either
did not pick up or preferred to get merged through the arm-soc tree."
* tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: at91/PMC: use at91_usb_rate() for UTMI PLL
ARM: at91/PMC: fix at91sam9n12 USB FS init
ARM: at91/PMC: at91sam9n12 family has a PLLB
ARM: at91/PMC: sama5d3 family doesn't have a PLLB
ARM: tegra: fix section mismatch in tegra_pmc_parse_dt
ARM: mxs: don't select HAVE_PWM
ARM: mxs: stub out mxs_pm_init for !CONFIG_PM
cpuidle: calxeda: select ARM_CPU_SUSPEND
ARM: mvebu: fix length of ethernet registers in mv78260 dtsi
ARM: at91: cpuidle: Fix target_residency
ARM: at91: fix at91_extern_irq usage for non-dt boards
ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary
clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change
X.509: do not emit any informational output
mtd: omap2: allow bulding as a module
[SCSI] nsp32: use mdelay instead of large udelay constants
hwrng: bcm2835: fix MODULE_LICENSE tag
ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED
ARM: at91: Fix link breakage when !CONFIG_PHYLIB
MAINTAINERS: Add exynos filename match to ARM/S5P EXYNOS ARM ARCHITECTURES
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the big driver core merge for 3.11-rc1
Lots of little things, and larger firmware subsystem updates, all
described in the shortlog. Nice thing here is that we finally get rid
of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
been always on for a number of kernel releases, now it's just
removed)"
* tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
driver core: device.h: fix doc compilation warnings
firmware loader: fix another compile warning with PM_SLEEP unset
build some drivers only when compile-testing
firmware loader: fix compile warning with PM_SLEEP set
kobject: sanitize argument for format string
sysfs_notify is only possible on file attributes
firmware loader: simplify holding module for request_firmware
firmware loader: don't export cache_firmware and uncache_firmware
drivers/base: Use attribute groups to create sysfs memory files
firmware loader: fix compile warning
firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER
Documentation: Updated broken link in HOWTO
Finally eradicate CONFIG_HOTPLUG
driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend
driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware
Documentation: Tidy up some drivers/base/core.c kerneldoc content.
platform_device: use a macro instead of platform_driver_register
firmware: move EXPORT_SYMBOL annotations
firmware: Avoid deadlock of usermodehelper lock at shutdown
dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here's the big char/misc driver tree merge for 3.11-rc1
A variety of different driver patches here. All of these have been in
linux-next for a while, and the networking patches were acked-by David
Miller, as it made sense for those patches to come through this tree"
* tag 'char-misc-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (102 commits)
Revert "char: misc: assign file->private_data in all cases"
drivers: uio_pdrv_genirq: Use of_match_ptr() macro
mei: check whether hw start has succeeded
mei: check if the hardware reset succeeded
mei: mei_cl_connect: don't multiply the timeout twice
mei: do not override a client writing state when buffering
mei: move mei_cl_irq_write_complete to client.c
UIO: Fix concurrency issue
drivers: uio_dmem_genirq: Use of_match_ptr() macro
char: misc: assign file->private_data in all cases
drivers: hv: allocate synic structures before hv_synic_init()
drivers: hv: check interrupt mask before read_index
vme: vme_tsi148.c: fix error return code in tsi148_probe()
FMC: fix error handling in probe() function
fmc: avoid readl/writel namespace conflict
FMC: NULL dereference on allocation failure
UIO: fix uio_pdrv_genirq with device tree but no interrupt
UIO: allow binding uio_pdrv_genirq.c to devices using command line option
FMC: add a char-device mezzanine driver
FMC: add a driver to write mezzanine EEPROM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree update from Greg KH:
"Here's the large staging tree merge for 3.11-rc1
Huge thing here is the Lustre client code. Unfortunatly, due to it
not building properly on a wide variety of different architectures
(this was production code???), it is currently disabled from the build
so as to not annoy people.
Other than Lustre, there are loads of comedi patches, working to clean
up that subsystem, iio updates and new drivers, and a load of cleanups
from the OPW applicants in their quest to get a summer internship.
All of these have been in the linux-next releases for a while (hence
the Lustre code being disabled)"
Fixed up trivial conflict in drivers/staging/serqt_usb2/serqt_usb2.c due
to independent renamings in the staging driver cleanup and the USB
tree..
* tag 'staging-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (868 commits)
Revert "Revert "Revert "staging/lustre: drop CONFIG_BROKEN dependency"""
staging: rtl8192u: fix line length in r819xU_phy.h
staging: rtl8192u: rename variables in r819xU_phy.h
staging: rtl8192u: fix comments in r819xU_phy.h
staging: rtl8192u: fix whitespace in r819xU_phy.h
staging: rtl8192u: fix newlines in r819xU_phy.c
staging: comedi: unioxx5: use comedi_alloc_spriv()
staging: comedi: unioxx5: fix unioxx5_detach()
silicom: checkpatch: errors caused by macros
Staging: silicom: remove the board_t typedef in bpctl_mod.c
Staging: silicom: capitalize labels in the bp_media_type enum
Staging: silicom: remove bp_media_type enum typedef
staging: rtl8192u: replace msleep(1) with usleep_range() in r819xU_phy.c
staging: rtl8192u: rename dwRegRead and rtStatus in r819xU_phy.c
staging: rtl8192u: replace __FUNCTION__ in r819xU_phy.c
staging: rtl8192u: limit line size in r819xU_phy.c
zram: allow request end to coincide with disksize
staging: drm/imx: use generic irq chip unused field to block out invalid irqs
staging: drm/imx: use generic irqchip
staging: drm/imx: ipu-dmfc: use defines for ipu channel numbers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big TTY / Serial driver merge for 3.11-rc1.
It's not all that big, nothing major changed in the tty api, which is
a nice change, just a number of serial driver fixes and updates and
new drivers, along with some n_tty fixes to help resolve some reported
issues.
All of these have been in the linux-next releases for a while, with
the exception of the last revert patch, which was reported this past
weekend by two different people as being needed."
* tag 'tty-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (51 commits)
Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller"
pch_uart: Add uart_clk selection for the MinnowBoard
tty: atmel_serial: prepare clk before calling enable
tty: Reset itty for other pty
n_tty: Buffer work should not reschedule itself
n_tty: Fix unsafe update of available buffer space
n_tty: Untangle read completion variables
n_tty: Encapsulate minimum_to_wake within N_TTY
serial: omap: Fix device tree based PM runtime
serial: imx: Fix serial clock unbalance
serial/mpc52xx_uart: fix kernel panic when system reboot
serial: mfd: Add sysrq support
serial: imx: enable the clocks for console
tty: serial: add Freescale lpuart driver support
serial: imx: Improve Kconfig text
serial: imx: Allow module build
serial: imx: Fix warning when !CONFIG_SERIAL_IMX_CONSOLE
tty/serial/sirf: fix error propagation in sirfsoc_uart_probe()
serial: omap: fix potential NULL pointer dereference in serial_omap_runtime_suspend()
tty: serial: Enable uartlite for ARM zynq
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here's the big USB 3.11-rc1 merge request.
Lots of gadget and finally, chipidea driver updates (they were much
needed), along with a new host controller driver, lots of little
serial driver fixes, the removal of the 255 usb-serial device
limitation, and a variety of other minor things.
All of these have been in the linux-next releases for a while"
* tag 'usb-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (254 commits)
usb: musb: omap2430: make it compile again
usb: chipidea: ci_hdrc_imx: access phy via private data
xhci: Add missing unlocks on error paths
USB: option,qcserial: move Novatel Gobi1K IDs to qcserial
ehci-atmel.c: prepare clk before calling enable
USB: ohci-at91: prepare clk before calling enable
USB: HWA: fix device probe failure
wusbcore: add entries in Documentation/ABI for new wusbhc sysfs attributes
wusbcore: add sysfs attribute for retry count
wusbcore: add sysfs attribute for DNTS count and interval
usb: chipidea: drop "13xxx" infix
usb: phy: tegra: remove duplicated include from phy-tegra-usb.c
usb: host: xhci-plat: release mem region while removing module
usbmisc_imx: allow autoloading on according to dt ids
usb: fix build error without CONFIG_USB_PHY
usb: check usb_hub_to_struct_hub() return value
xhci: check for failed dma pool allocation
usb: gadget: f_subset: fix missing unlock on error in geth_alloc()
usb: gadget: f_ncm: fix missing unlock on error in ncm_alloc()
usb: gadget: f_ecm: fix missing unlock on error in ecm_alloc()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull FS-Cache updates from David Howells:
"This contains a number of fixes for various FS-Cache issues plus some
cleanups. The commits are, in order:
1) Provide a system wait_on_atomic_t() and wake_up_atomic_t() sharing
the bit-wait table (enhancement for #8).
2) Don't put spin_lock() in a while-condition as spin_lock() may have
a do {} while(0) wrapper (cleanup).
3) Symbolically name i_mutex lock classes rather than using numbers
in CacheFiles (cleanup).
4) Don't sleep in page release if __GFP_FS is not set (deadlock vs
ext4).
5) Uninline fscache_object_init() (cleanup for #7).
6) Wrap checks on object state (cleanup for #7).
7) Simplify the object state machine by separating work states from
wait states.
8) Simplify cookie retention by objects (NULL pointer deref fix).
9) Remove unused list_to_page() macro (cleanup).
10) Make the remaining-pages counter in the retrieval op atomic
(assertion failure fix).
11) Don't use spin_is_locked() in assertions (assertion failure fix)"
* tag 'fscache-20130702' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
FS-Cache: Don't use spin_is_locked() in assertions
FS-Cache: The retrieval remaining-pages counter needs to be atomic_t
cachefiles: remove unused macro list_to_page()
FS-Cache: Simplify cookie retention for fscache_objects, fixing oops
FS-Cache: Fix object state machine to have separate work and wait states
FS-Cache: Wrap checks on object state
FS-Cache: Uninline fscache_object_init()
FS-Cache: Don't sleep in page release if __GFP_FS is not set
CacheFiles: name i_mutex lock class explicitly
fs/fscache: remove spin_lock() from the condition in while()
Add wait_on_atomic_t() and wake_up_atomic_t()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set includes a number of SCTP related fixes in the dlm, and a few
other minor fixes and changes."
* tag 'dlm-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: Avoid LVB truncation
dlm: log an error for unmanaged lockspaces
dlm: config: using strlcpy instead of strncpy
dlm: remove duplicated include from lowcomms.c
dlm: disable nagle for SCTP
dlm: retry failed SCTP sends
dlm: try other IPs when sctp init assoc fails
dlm: clear correct bit during sctp init failure handling
dlm: set sctp assoc id during setup
dlm: clear correct init bit during sctp setup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This patch-set includes the following major enhancement patches:
- remount_fs callback function
- restore parent inode number to enhance the fsync performance
- xattr security labels
- reduce the number of redundant lock/unlock data pages
- avoid frequent write_inode calls
The other minor bug fixes are as follows.
- endian conversion bugs
- various bugs in the roll-forward recovery routine"
* tag 'for-f2fs-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (56 commits)
f2fs: fix to recover i_size from roll-forward
f2fs: remove the unused argument "sbi" of func destroy_fsync_dnodes()
f2fs: remove reusing any prefree segments
f2fs: code cleanup and simplify in func {find/add}_gc_inode
f2fs: optimize the init_dirty_segmap function
f2fs: fix an endian conversion bug detected by sparse
f2fs: fix crc endian conversion
f2fs: add remount_fs callback support
f2fs: recover wrong pino after checkpoint during fsync
f2fs: optimize do_write_data_page()
f2fs: make locate_dirty_segment() as static
f2fs: remove unnecessary parameter "offset" from __add_sum_entry()
f2fs: avoid freqeunt write_inode calls
f2fs: optimise the truncate_data_blocks_range() range
f2fs: use the F2FS specific flags in f2fs_ioctl()
f2fs: sync dir->i_size with its block allocation
f2fs: fix i_blocks translation on various types of files
f2fs: set sb->s_fs_info before calling parse_options()
f2fs: support xattr security labels
f2fs: fix iget/iput of dir during recovery
...
|
|
Pull GFS2 updates from Steven Whitehouse:
"There are a few bug fixes for various, mostly very minor corner cases,
plus some interesting new features.
The new features include atomic_open whose main benefit will be the
reduction in locking overhead in case of combined lookup/create and
open operations, sorting the log buffer lists by block number to
improve the efficiency of AIL writeback, and aggressively issuing
revokes in gfs2_log_flush to reduce overhead when dropping glocks."
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Reserve journal space for quota change in do_grow
GFS2: Fix fstrim boundary conditions
GFS2: fix warning message
GFS2: aggressively issue revokes in gfs2_log_flush
GFS2: fix regression in dir_double_exhash
GFS2: Add atomic_open support
GFS2: Only do one directory search on create
GFS2: fix error propagation in init_threads()
GFS2: Remove no-op wrapper function
GFS2: Cocci spatch "ptr_ret.spatch"
GFS2: Eliminate gfs2_rg_lops
GFS2: Sort buffer lists by inplace block number
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Lots of bug fixes, cleanups and optimizations. In the bug fixes
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
ext4: optimize starting extent in ext4_ext_rm_leaf()
jbd2: invalidate handle if jbd2_journal_restart() fails
ext4: translate flag bits to strings in tracepoints
ext4: fix up error handling for mpage_map_and_submit_extent()
jbd2: fix theoretical race in jbd2__journal_restart
ext4: only zero partial blocks in ext4_zero_partial_blocks()
ext4: check error return from ext4_write_inline_data_end()
ext4: delete unnecessary C statements
ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()
jbd2: move superblock checksum calculation to jbd2_write_superblock()
ext4: pass inode pointer instead of file pointer to punch hole
ext4: improve free space calculation for inline_data
ext4: reduce object size when !CONFIG_PRINTK
ext4: improve extent cache shrink mechanism to avoid to burn CPU time
ext4: implement error handling of ext4_mb_new_preallocation()
ext4: fix corruption when online resizing a fs with 1K block size
ext4: delete unused variables
ext4: return FIEMAP_EXTENT_UNKNOWN for delalloc extents
jbd2: remove debug dependency on debug_fs and update Kconfig help text
jbd2: use a single printk for jbd_debug()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS patches (part 1) from Al Viro:
"The major change in this pile is ->readdir() replacement with
->iterate(), dealing with ->f_pos races in ->readdir() instances for
good.
There's a lot more, but I'd prefer to split the pull request into
several stages and this is the first obvious cutoff point."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (67 commits)
[readdir] constify ->actor
[readdir] ->readdir() is gone
[readdir] convert ecryptfs
[readdir] convert coda
[readdir] convert ocfs2
[readdir] convert fatfs
[readdir] convert xfs
[readdir] convert btrfs
[readdir] convert hostfs
[readdir] convert afs
[readdir] convert ncpfs
[readdir] convert hfsplus
[readdir] convert hfs
[readdir] convert befs
[readdir] convert cifs
[readdir] convert freevxfs
[readdir] convert fuse
[readdir] convert hpfs
reiserfs: switch reiserfs_readdir_dentry to inode
reiserfs: is_privroot_deh() needs only directory inode, actually
...
|
|
When sync does it's WB_SYNC_ALL writeback, it issues data Io and
then immediately waits for IO completion. This is done in the
context of the flusher thread, and hence completely ties up the
flusher thread for the backing device until all the dirty inodes
have been synced. On filesystems that are dirtying inodes constantly
and quickly, this means the flusher thread can be tied up for
minutes per sync call and hence badly affect system level write IO
performance as the page cache cannot be cleaned quickly.
We already have a wait loop for IO completion for sync(2), so cut
this out of the flusher thread and delegate it to wait_sb_inodes().
Hence we can do rapid IO submission, and then wait for it all to
complete.
Effect of sync on fsmark before the patch:
FSUse% Count Size Files/sec App Overhead
.....
0 640000 4096 35154.6 1026984
0 720000 4096 36740.3 1023844
0 800000 4096 36184.6 916599
0 880000 4096 1282.7 1054367
0 960000 4096 3951.3 918773
0 1040000 4096 40646.2 996448
0 1120000 4096 43610.1 895647
0 1200000 4096 40333.1 921048
And a single sync pass took:
real 0m52.407s
user 0m0.000s
sys 0m0.090s
After the patch, there is no impact on fsmark results, and each
individual sync(2) operation run concurrently with the same fsmark
workload takes roughly 7s:
real 0m6.930s
user 0m0.000s
sys 0m0.039s
IOWs, sync is 7-8x faster on a busy filesystem and does not have an
adverse impact on ongoing async data write operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If user requests many data writes and fsync together, the last updated i_size
should be stored to the inode block consistently.
But, previous write_end just marks the inode as dirty and doesn't update its
metadata into its inode block.
After that, fsync just writes the inode block with newly updated data index
excluding inode metadata updates.
So, this patch introduces write_end in which updates inode block too when the
i_size is changed.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
As destroy_fsync_dnodes() is a simple list-cleanup func, so delete the unused
and unrelated f2fs_sb_info argument of it.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch removes check_prefree_segments initially designed to enhance the
performance by narrowing the range of LBA usage across the whole block device.
When allocating a new segment, previous f2fs tries to find proper prefree
segments, and then, if finds a segment, it reuses the segment for further
data or node block allocation.
However, I found that this was totally wrong approach since the prefree segments
have several data or node blocks that will be used by the roll-forward mechanism
operated after sudden-power-off.
Let's assume the following scenario.
/* write 8MB with fsync */
for (i = 0; i < 2048; i++) {
offset = i * 4096;
write(fd, offset, 4KB);
fsync(fd);
}
In this case, naive segment allocation sequence will be like:
data segment: x, x+1, x+2, x+3
node segment: y, y+1, y+2, y+3.
But, if we can reuse prefree segments, the sequence can be like:
data segment: x, x+1, y, y+1
node segment: y, y+1, y+2, y+3.
Because, y, y+1, and y+2 became prefree segments one by one, and those are
reused by data allocation.
After conducting this workload, we should consider how to recover the latest
inode with its data.
If we reuse the prefree segments such as y or y+1, we lost the old node blocks
so that f2fs even cannot start roll-forward recovery.
Therefore, I suggest that we should remove reusing prefree segments.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch simplifies list operations in find_gc_inode and add_gc_inode.
Just simple code cleanup.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: add description]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Optimize the while loop condition
Since this condition will always be true and while loop will
be terminated by the following condition in code:
if (segno >= TOTAL_SEGS(sbi))
break;
Hence we can replace the while loop condition with while(1)
instead of always checking for segno to be less than Total segs.
Also we do not need to use TOTAL_SEGS() everytime. We can store
this value in a local variable since this value is constant.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch should fix the following bug reported by kbuild test robot.
fs/f2fs/recovery.c:233:33: sparse: incorrect type in assignment
(different base types)
parse warnings: (new ones prefixed by >>)
>> recovery.c:233: sparse: incorrect type in assignment (different base types)
recovery.c:233: expected unsigned int [unsigned] [assigned] ofs_in_node
recovery.c:233: got restricted __le16 [assigned] [usertype] ofs_in_node
>> recovery.c:238: sparse: incorrect type in assignment (different base types)
recovery.c:238: expected unsigned int [unsigned] ofs_in_node
recovery.c:238: got restricted __le16 [assigned] [usertype] ofs_in_node
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
While calculating CRC for the checkpoint block, we use __u32, but when storing
the crc value to the disk, we use __le32.
Let's fix the inconsistency.
Reported-and-Tested-by: Oded Gabbay <ogabbay@advaoptical.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Both hole punch and truncate use ext4_ext_rm_leaf() for removing
blocks. Currently we choose the last extent as the starting
point for removing blocks:
ex = EXT_LAST_EXTENT(eh);
This is OK for truncate but for hole punch we can optimize the extent
selection as the path is already initialized. We could use this
information to select proper starting extent. The code change in this
patch will not affect truncate as for truncate path[depth].p_ext will
always be NULL.
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
If jbd2_journal_restart() fails the handle will have been disconnected
from the current transaction. In this situation, the handle must not
be used for for any jbd2 function other than jbd2_journal_stop().
Enforce this with by treating a handle which has a NULL transaction
pointer as an aborted handle, and issue a kernel warning if
jbd2_journal_extent(), jbd2_journal_get_write_access(),
jbd2_journal_dirty_metadata(), etc. is called with an invalid handle.
This commit also fixes a bug where jbd2_journal_stop() would trip over
a kernel jbd2 assertion check when trying to free an invalid handle.
Also move the responsibility of setting current->journal_info to
start_this_handle(), simplifying the three users of this function.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Younger Liu <younger.liu@huawei.com>
Cc: Jan Kara <jack@suse.cz>
|
|
Translate the bitfields used in various flags argument to strings to
make the tracepoint output more human-readable.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The function mpage_released_unused_page() must only be called once;
otherwise the kernel will BUG() when the second call to
mpage_released_unused_page() tries to unlock the pages which had been
unlocked by the first call.
Also restructure the error handling so that we only give up on writing
the dirty pages in the case of ENOSPC where retrying the allocation
won't help. Otherwise, a transient failure, such as a kmalloc()
failure in calling ext4_map_blocks() might cause us to give up on
those pages, leading to a scary message in /var/log/messages plus data
loss.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
|
|
Once we decrement transaction->t_updates, if this is the last handle
holding the transaction from closing, and once we release the
t_handle_lock spinlock, it's possible for the transaction to commit
and be released. In practice with normal kernels, this probably won't
happen, since the commit happens in a separate kernel thread and it's
unlikely this could all happen within the space of a few CPU cycles.
On the other hand, with a real-time kernel, this could potentially
happen, so save the tid found in transaction->t_tid before we release
t_handle_lock. It would require an insane configuration, such as one
where the jbd2 thread was set to a very high real-time priority,
perhaps because a high priority real-time thread is trying to read or
write to a file system. But some people who use real-time kernels
have been known to do insane things, including controlling
laser-wielding industrial robots. :-)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
Currently if we pass range into ext4_zero_partial_blocks() which covers
entire block we would attempt to zero it even though we should only zero
unaligned part of the block.
Fix this by checking whether the range covers the whole block skip
zeroing if so.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The function ext4_write_inline_data_end() can return an error. So we
need to assign it to a signed integer variable to check for an error
return (since copied is an unsigned int).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
|
|
Comparing unsigned variable with 0 always returns false.
err = 0 is duplicated and unnecessary.
[ tytso: Also cleaned up error handling in ext4_block_zero_page_range() ]
Signed-off-by: "Jon Ernst" <jonernst07@gmx.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Both ext3 and ext4 htree_dirblock_to_tree() is just filling the
in-core rbtree for use by call_filldir(). All updates of ->f_pos are
done by the latter; bumping it here (on error) is obviously wrong - we
might very well have it nowhere near the block we'd found an error in.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
Some of the functions which modify the jbd2 superblock were not
updating the checksum before calling jbd2_write_superblock(). Move
the call to jbd2_superblock_csum_set() to jbd2_write_superblock(), so
that the checksum is calculated consistently.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: stable@vger.kernel.org
|
|
No need to pass file pointer when we can directly pass inode pointer.
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
In ext4 feature inline_data,it use the xattr's space to store the
inline data in inode.When we calculate the inline data as the xattr,we
add the pad.But in get_max_inline_xattr_value_size() function we count
the free space without pad.It cause some contents are moved to a block
even if it can be
stored in the inode.
Signed-off-by: liulei <lewis.liulei@huawei.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
|
|
Reduce the object size ~10% could be useful for embedded systems.
Add #ifdef CONFIG_PRINTK #else #endif blocks to hold formats and
arguments, passing " " to functions when !CONFIG_PRINTK and still
verifying format and arguments with no_printk.
$ size fs/ext4/built-in.o*
text data bss dec hex filename
239375 610 888 240873 3ace9 fs/ext4/built-in.o.new
264167 738 888 265793 40e41 fs/ext4/built-in.o.old
$ grep -E "CONFIG_EXT4|CONFIG_PRINTK" .config
# CONFIG_PRINTK is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Now we maintain an proper in-order LRU list in ext4 to reclaim entries
from extent status tree when we are under heavy memory pressure. For
keeping this order, a spin lock is used to protect this list. But this
lock burns a lot of CPU time. We can use the following steps to trigger
it.
% cd /dev/shm
% dd if=/dev/zero of=ext4-img bs=1M count=2k
% mkfs.ext4 ext4-img
% mount -t ext4 -o loop ext4-img /mnt
% cd /mnt
% for ((i=0;i<160;i++)); do truncate -s 64g $i; done
% for ((i=0;i<160;i++)); do cp $i /dev/null &; done
% perf record -a -g
% perf report
This commit tries to fix this problem. Now a new member called
i_touch_when is added into ext4_inode_info to record the last access
time for an inode. Meanwhile we never need to keep a proper in-order
LRU list. So this can avoid to burns some CPU time. When we try to
reclaim some entries from extent status tree, we use list_sort() to get
a proper in-order list. Then we traverse this list to discard some
entries. In ext4_sb_info, we use s_es_last_sorted to record the last
time of sorting this list. When we traverse the list, we skip the inode
that is newer than this time, and move this inode to the tail of LRU
list. When the head of the list is newer than s_es_last_sorted, we will
sort the LRU list again.
In this commit, we break the loop if s_extent_cache_cnt == 0 because
that means that all extents in extent status tree have been reclaimed.
Meanwhile in this commit, ext4_es_{un}register_shrinker()'s prototype is
changed to save a local variable in these functions.
Reported-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
If memory allocation in ext4_mb_new_group_pa() is failed,
it returns error code, ext4_mb_new_preallocation() propages it,
but ext4_mb_new_blocks() ignores it.
An observed result was:
- allocation fail means ext4_mb_new_group_pa() does not update
ext4_allocation_context;
- ext4_mb_new_blocks() sets ext4_allocation_request->len (ar->len =
ac->ac_b_ex.fe_len;) to number of blocks preallocated (512) instead
of number of blocks requested (1);
- that activates update cycle in ext4_splice_branch():
for (i = 1; i < blks; i++) <-- blks is 512 instead of 1 here
*(where->p + i) = cpu_to_le32(current_block++);
- it iterates 511 times and corrupts a chunk of memory including inode
structure;
- page fault happens at EXT4_SB(inode->i_sb) in ext4_mark_inode_dirty();
- system hangs with 'scheduling while atomic' BUG.
The patch implements a check for ext4_mb_new_preallocation() error
code and handles its failure as if ext4_mb_regular_allocator() fails.
Found by Linux File System Verification project (linuxtesting.org).
[ Patch restructed by tytso to make the flow of control easier to follow. ]
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Subtracting the number of the first data block places the superblock
backups one block too early, corrupting the file system. When the block
size is larger than 1K, the first data block is 0, so the subtraction
has no effect and no corruption occurs.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
CC: stable@vger.kernel.org
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull another powerpc fix from Benjamin Herrenschmidt:
"I mentioned that while we had fixed the kernel crashes, EEH error
recovery didn't always recover... It appears that I had a fix for
that already in powerpc-next (with a stable CC).
I cherry-picked it today and did a few tests and it seems that things
now work quite well. The patch is also pretty simple, so I see no
reason to wait before merging it."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/eeh: Fix fetching bus for single-dev-PE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of seven bug fixes. Several fcoe fixes for locking
problems, initiator issues and a VLAN API change, all of which could
eventually lead to data corruption, one fix for a qla2xxx locking
problem which could lead to multiple completions of the same request
(and subsequent data corruption) and a use after free in the ipr
driver. Plus one minor MAINTAINERS file update"
(only six bugfixes in this pull, since I had already pulled the fcoe API
fix directly from Robert Love)
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] ipr: Avoid target_destroy accessing memory after it was freed
[SCSI] qla2xxx: Fix for locking issue between driver ISR and mailbox routines
MAINTAINERS: Fix fcoe mailing list
libfc: extend ex_lock to protect all of fc_seq_send
libfc: Correct check for initiator role
libfcoe: Fix Conflicting FCFs issue in the fabric
|
|
PCI 9835 Multi-I/O Controller"
This reverts commit 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366.
As reported by Stefan, this device already works with the parport_serial
driver, so the 8250_pci driver should not also try to grab it as well.
Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Cc: Wang YanQing <udknight@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While running Linux as guest on top of phyp, we possiblly have
PE that includes single PCI device. However, we didn't return
its PCI bus correctly and it leads to failure on recovery from
EEH errors for single-dev-PE. The patch fixes the issue.
Cc: <stable@vger.kernel.org> # v3.7+
Cc: Steve Best <sbest@us.ibm.com>
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Ben Herrenschmidt:
"We discovered some breakage in our "EEH" (PCI Error Handling) code
while doing error injection, due to a couple of regressions. One of
them is due to a patch (37f02195bee9 "powerpc/pci: fix PCI-e devices
rescan issue on powerpc platform") that, in hindsight, I shouldn't
have merged considering that it caused more problems than it solved.
Please pull those two fixes. One for a simple EEH address cache
initialization issue. The other one is a patch from Guenter that I
had originally planned to put in 3.11 but which happens to also fix
that other regression (a kernel oops during EEH error handling and
possibly hotplug).
With those two, the couple of test machines I've hammered with error
injection are remaining up now. EEH appears to still fail to recover
on some devices, so there is another problem that Gavin is looking
into but at least it's no longer crashing the kernel."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/pci: Improve device hotplug initialization
powerpc/eeh: Add eeh_dev to the cache during boot
|
|
Due to recent changes and expecations of proper cpu bindings, there are
now cases for many of the in-tree devicetrees where a WARN() will hit
on boot due to badly formatted /cpus nodes.
Downgrade this to a pr_warn() to be less alarmist, since it's not a
new problem.
Tested on Arndale, Cubox, Seaboard and Panda ES. Panda hits the WARN
without this, the others do not.
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 37f02195b (powerpc/pci: fix PCI-e devices rescan issue on powerpc
platform) fixes a problem with interrupt and DMA initialization on hot
plugged devices. With this commit, interrupt and DMA initialization for
hot plugged devices is handled in the pci device enable function.
This approach has a couple of drawbacks. First, it creates two code paths
for device initialization, one for hot plugged devices and another for devices
known during the initial PCI scan. Second, the initialization code for hot
plugged devices is only called when the device is enabled, ie typically
in the probe function. Also, the platform specific setup code is called each
time pci_enable_device() is called, not only once during device discovery,
meaning it is actually called multiple times, once for devices discovered
during the initial scan and again each time a driver is re-loaded.
The visible result is that interrupt pins are only assigned to hot plugged
devices when the device driver is loaded. Effectively this changes the PCI
probe API, since pci_dev->irq and the device's dma configuration will now
only be valid after pci_enable() was called at least once. A more subtle
change is that platform specific PCI device setup is moved from device
discovery into the driver's probe function, more specifically into the
pci_enable_device() call.
To fix the inconsistencies, add new function pcibios_add_device.
Call pcibios_setup_device from pcibios_setup_bus_devices if device setup
is not complete, and from pcibios_add_device if bus setup is complete.
With this change, device setup code is moved back into device initialization,
and called exactly once for both static and hot plugged devices.
[ This also fixes a regression introduced by the above patch which
causes dev->irq to be overwritten under some cirumstances after
MSIs have been enabled for the device which leads to crashes due
to the MSI core "hijacking" dev->irq to store the base MSI number
and not the LSI. --BenH
]
Cc: Yuanquan Chen <Yuanquan.Chen@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hiroo Matsumoto <matsumoto.hiroo@jp.fujitsu.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
