aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-24mfd: Kontron PLD mfd driverKevin Strasser
Add core MFD driver for the on-board PLD found on some Kontron embedded modules. The PLD device may provide functions like watchdog, GPIO, UART and I2C bus. The following modules are supported: * COMe-bIP# * COMe-bPC2 (ETXexpress-PC) * COMe-bSC# (ETXexpress-SC T#) * COMe-cCT6 * COMe-cDC2 (microETXexpress-DC) * COMe-cPC2 (microETXexpress-PC) * COMe-mCT10 * ETX-OH Originally-From: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-24mfd: palmas: Add TPS659038 PMIC supportJ Keerthy
The Patch adds TPS659038 PMIC support in the palmas mfd driver. The TPS659038 has almost the same registers as of the earlier supported variants of PALMAS family such as the TWL6035. The critical differences between TPS659038 and TWL6035 being: 1) TPS659038 has nothing related to battery charging and back up battery stuff. 2) TPS659038 does not have does not have SMPS10(Boost) step up convertor. 3) TPS659038 does not have Battery detection and anything related to battery. 4) SD card detection, Battery presence detection, Vibrator, USB OTG are missing when compared to TWL6035. Signed-off-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-20mfd: palmas: Add SMPS10_BOOST featureJ Keerthy
The SMPS10 regulator is not presesnt in all the variants of the PALMAS PMIC family. Hence adding a feature to distingush between them. Signed-off-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-20mfd: palmas: Check if irq is validJ Keerthy
Check if irq value obtained is valid. If it is not valid then skip the irq request step and go ahead with the probe. Signed-off-by: J Keerthy <j-keerthy@ti.com> Reviewed-by: Mark Brown <broonie@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-20mfd: lpc_ich: iTCO_wdt patch for Intel Coleto Creek DeviceIDsSeth Heasley
This patch adds the LPC Controller DeviceIDs for iTCO Watchdog for the Intel Coleto Creek PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-20mfd: twl-core: Change TWL6025 references to TWL6032Graeme Gregory
The TWL6025 was never released beyond sample form and was replaced by the PhoenixLite range of chips - TWL6032. Change the references to reference the TWL6032 class and name the registers to twl6032 in line with an actual released chip name to avoid confusion. Currently there are no users of TWL6025 in the code. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviwed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-20mfd: davinci_voicecodec: Fix build breakageSachin Kamat
Include the missing header file to fix the following build error: drivers/mfd/davinci_voicecodec.c: In function ‘davinci_vc_probe’: drivers/mfd/davinci_voicecodec.c:86:3: error: implicit declaration of function ‘io_v2p’ [-Werror=implicit-function-declaration] (dma_addr_t)(io_v2p(davinci_vc->base) + DAVINCI_VC_WFIFO); Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-19Merge branch 'for-mfd-next' of ↵Samuel Ortiz
git://git.linaro.org/people/ljones/linux-3.0-ux500 Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-19mfd: vexpress: Make the driver optional for arm and arm64Pawel Moll
The driver can be used on either arm or arm64 platforms, but the latter doesn't have any platform-specific configuration options, so it must be possible to manually enable the driver. As the gpiolib is optional for arm64 arch, the gpio/led code must be compiled conditionally. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-19mfd: htc-egpio: Use devm_ioremap_nocache() instead of ioremap_nocache()Wei Yongjun
Replace probe-time ioremap_nocache() call with devm_ioremap_nocache() to avoid iounmap() missing and get rid of the corresponding iounmap() call on remove. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-06-19mfd: davinci_voicecodec: Convert to use devm_* APIsSachin Kamat
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-06-19mfd: twl4030-power: Fix relocking on errorFlorian Vaussard
If an error occurs when loading power scripts or resources, the registers are not correctly relocked. Fix it. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-19mfd: twl4030-power: Simplify error pathFlorian Vaussard
Remove unnecessary goto statements, causing duplicated if conditions. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-19mfd: twl4030-power: Start transition to DTFlorian Vaussard
Support for loading twl4030-power module via devicetree. For now, when booting with a DT, only the poweroff callback feature is supported through the ti,use_poweroff property. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-19mfd: twl4030-power: Simplify probing of power scripts and resourcesFlorian Vaussard
Increase lisibility when probing power scripts and resources by creating dedicated functions. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-19mfd: twl4030-power: Split from twl-core into a dedicated moduleFlorian Vaussard
For now, the call to twl4030-power is hard-wired inside twl-core. To ease the future transition to DT, make twl4030-power as a separate module, like what is already done for twl4030-audio and others. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: ssbi: Use devm_* and simplify codeStephen Boyd
Use devm_ioremap_resource and devm_kzalloc to simplify error paths and reduce lines of code. Also use dev_err() to keep consistency and drop the .remove function because the devm functions take care of what it's doing besides the now obsolete platform_set_drvdata() which we can just drop. Finally, use module_platform_driver() to save some more lines. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: ssbi: Add MODULE_DEVICE_TABLEStephen Boyd
This allows the ssbi module to be autoloaded on boot. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: twl4030: Allow IRQ wake enable to succeed on subchip IRQsKevin Hilman
The genirq IRQ wake method will default to failure if the irq_chip does not provide a set_wake method. However, for TWL4030 sub-chip IRQs, we want the wake enable to succeed even though we don't provide a set_wake method. This allows sub-chip IRQs to still be flagged as wakeup capable, and allow them to wakeup from suspend (or abort suspend if they fire during suspend.) To fix, use the IRQCHIP_SKIP_SET_WAKE flag in the irq_chip. Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: lpc_ich: Convert to module_pci_driverLibo Chen
use module_pci_driver instead of init/exit, make code cleaner. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: 88pm800: Add regulator sub deviceChao Xie
Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: 88pm800: Enhance sub devices initializationChao Xie
Separate the devices initialization into different functions. It makes the probe function clearer. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: 88pm80x: Change chip id definition and detectionChao Xie
Change the chip id definition and detection and then: 1. We no longer need to add PM800_CHIP_XXX for the coming revision. 2. We no longer need to pass driver_data in i2c_device_id as we can distinguish the chips from the CHIP_ID register. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: 88pm800: Enhance error handling for sub pages probe/removeChao Xie
pm800_pages_init and pm800_pages_exit are called by pm800_probe. Change the code to enhance error handling and remove unused code at pm800_pages_init/exit and pm800_probe. Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: 88pm800: Remove the power and gpadc page addr from platform dataChao Xie
88pm800 has two addtional pages - power and gpadc. The address of the pages depends on the address of 88pm800. So do not need pass the address of the power and gpadc in platform data. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: 88pm800: 88pm805: Remove "IRQF_TRIGGER_FALLING" flagYi Zhang
88pm800/88pm805 interrupt is asserted low if the events happened. So remove IRQF_TRIGGER_FALLING for irq request. Also, the interrupt wiring is board dependent so do not set IRQF_TRIGGER by default. Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: 88pm800: Initialize mask_invertChao Xie
mask_invert must be set otherwise interrupts cannot be cleared. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: 88pm80x: Fix driver name for 88pm800 and 88pm805Chao Xie
88pm800 and 88pm805 shouldnot have the same driver name. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: 88pm800: Fix NULL pointer dereferenceYi Zhang
Move "device_800_init" to fix NULL pointer error when calling "device_gpadc_init" as it needs "subchip->regmap_gpadc" to set registers via regmap interface Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: arizona: Integrate wm8997 into Arizona mfdCharles Keepax
The wm8997 is a compact, high-performance audio hub CODEC with SLIMbus interfacing, for smartphones, tablets and other portable audio devices based on the Arizona platform. This patch integrates the wm8997 into the Arizona mfd. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: wm8994: Reset device during probeMark Brown
Ensure that the device is in a known good state. This should have little practical impact as the runtime PM will reset the device shortly after probe but it's neater. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-17mfd: palmas: Remove code which is not necessary for a device tree bootJ Keerthy
Remove code which is not necessary for a device tree boot. Boot tested on OMAP5-UEVM board. Signed-off-by: J Keerthy <j-keerthy@ti.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13Merge tag 'am335x_tsc-adc' of git://breakpoint.cc/bigeasy/linuxSamuel Ortiz
A complete refurbished series inclunding: - DT support for the MFD, TSC and ADC driver & platform device support, which has no users, has been killed. - iio_map from last series is gone and replaced by proper nodes in the device tree. - suspend fixes which means correct data structs are taken and no interrupt storm - fifo split which should problem with TSC & ADC beeing used at the same time - The ADC channels are now checked before blindly applied. That means the touch part reads X, Y and Z coordinates and does not mix them up. Same goes for the IIO ADC driver. - The IIO ADC driver now creates files named in_voltageX_raw where X represents the ADC line instead of a number starting at 0. A read from this file can return -EBUSY in case touch is busy and the ADC didn't collect a value.
2013-06-13mfd: 88pm860x: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: max8925: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: max77686: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: janz-cmodio: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: htc-pasic3: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: htc-i2cpld: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: htc-egpio: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: davinci_voicecodec: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: cros_ec: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: asic3: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: adp5520: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: abx500-core: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: ab8500-gpadc: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: ab8500-debug: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: ab3100-otp: Convert to managed resources for allocating memoryLee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13mfd: tps65912: Convert to managed resources for allocating memoryLee Jones
Saves on code and simplifies the driver, as these resources are now tracked and freed automatically when the driver is realised. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13Merge branch 'for-mfd-next' of ↵Samuel Ortiz
git://git.linaro.org/people/ljones/linux-3.0-ux500
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 13:37:58 +0000