aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-26drivers/virt/fsl_hypervisor: remove unneeded `ret` variable in `fsl_hv_open()`Guo Zhengkui
Fix the following coccicheck warning: drivers/virt/fsl_hypervisor.c:662:5-8: Unneeded variable: "ret". Return "0" on line 679. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Link: https://lore.kernel.org/r/20220426083315.9551-1-guozhengkui@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24VMCI: Add support for ARM64Vishnu Dasa
Add support for ARM64 architecture so that the driver can now be built and VMCI device can be used. Update Kconfig file to allow the driver to be built on ARM64 as well. Fail vmci_guest_probe_device() on ARM64 if the device does not support MMIO register access. Lastly, add virtualization specific barriers which map to actual memory barrier instructions on ARM64, because it is required in case of ARM64 for queuepair (de)queuing. Reviewed-by: Bryan Tan <bryantan@vmware.com> Reviewed-by: Cyprien Laplace <claplace@vmware.com> Signed-off-by: Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/20220414193316.14356-1-vdasa@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24firmware: stratix10-svc: fix a missing check on list iteratorXiaomeng Tong
The bug is here: pmem->vaddr = NULL; The list iterator 'pmem' will point to a bogus position containing HEAD if the list is empty or no element is found. This case must be checked before any use of the iterator, otherwise it will lead to a invalid memory access. To fix this bug, just gen_pool_free/set NULL/list_del() and return when found, otherwise list_del HEAD and return; Fixes: 7ca5ce896524f ("firmware: add Intel Stratix10 service layer driver") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220414035609.2239-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24/dev/mem: make reads and writes interruptibleJason A. Donenfeld
In 8619e5bdeee8 ("/dev/mem: Bail out upon SIGKILL."), /dev/mem became killable, and that commit noted: Theoretically, reading/writing /dev/mem and /dev/kmem can become "interruptible". But this patch chose "killable". Future patch will make them "interruptible" so that we can revert to "killable" if some program regressed. So now we take the next step in making it "interruptible", by changing fatal_signal_pending() into signal_pending(). Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20220407122638.490660-1-Jason@zx2c4.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24char: xillybus: fix a refcount leak in cleanup_dev()Hangyu Hua
usb_get_dev is called in xillyusb_probe. So it is better to call usb_put_dev before xdev is released. Acked-by: Eli Billauer <eli.billauer@gmail.com> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220406075703.23464-1-hbh25y@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24misc: bcm-vk: replace usage of found with dedicated list iterator variableJakob Koschel
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220327214551.2188544-1-jakobkoschel@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24w1/ds2490: remove dump from ds_recv_status, pr_ to dev_XXX logging.Christian Vogel
Changed all remaining pr_XXX calls that write out debugging info into dev_XXX calls, changed the needlessly verbose decoding of status bits into dev_dbg(), so that it's supressed by the logging levels by default. Forthermore the ds_recv_status function has a "dump" parameter that enables extremely verbose logging, and that's used only once. This has been factored out, and called explicitly at that one place. Signed-off-by: Christian Vogel <vogelchr@vogel.cx> Link: https://lore.kernel.org/r/20220324193246.16814-2-vogelchr@vogel.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24misc: fastrpc: fix an incorrect NULL check on list iteratorXiaomeng Tong
The bug is here: if (!buf) { The list iterator value 'buf' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty (in this case, the check 'if (!buf) {' will always be false and never exit expectly). To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'buf' as a dedicated pointer to point to the found element. Fixes: 2419e55e532de ("misc: fastrpc: add mmap/unmap support") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220327062202.5720-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24char: xillybus: replace usage of found with dedicated list iterator variableJakob Koschel
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Acked-by: Eli Billauer <eli.billauer@gmail.com> Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220324070939.59297-1-jakobkoschel@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24misc: vmw_vmci: replace usage of found with dedicated list iterator variableJakob Koschel
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220324073151.66305-1-jakobkoschel@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24vmw_balloon: Print errors on reset only onceNadav Amit
The VMware balloon might be reset multiple times during execution. Print errors only once to avoid filling the log unnecessarily. Signed-off-by: Nadav Amit <namit@vmware.com> Link: https://lore.kernel.org/r/20220322170052.6351-1-namit@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24nvmem: sunplus-ocotp: drop useless probe confirmationKrzysztof Kozlowski
Printing probe success is discouraged, because we can use tracing for this purpose. Remove useless print message after Sunplus OCOTP driver probe. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20220321110326.44652-3-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24nvmem: sunplus-ocotp: staticize sp_otp_v0Krzysztof Kozlowski
The "sp_otp_v0" file scope variable is not used outside, so make it static to fix warning: drivers/nvmem/sunplus-ocotp.c:74:29: sparse: sparse: symbol 'sp_otp_v0' was not declared. Should it be static? Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20220321110326.44652-2-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24nvmem: bcm-ocotp: mark ACPI device ID table as maybe unusedKrzysztof Kozlowski
"bcm_otpc_acpi_ids" is used with ACPI_PTR, so a build with !CONFIG_ACPI has a warning: drivers/nvmem/bcm-ocotp.c:247:36: error: ‘bcm_otpc_acpi_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20220321110326.44652-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24char: misc: remove usage of list iterator past the loop bodyJakob Koschel
In preparation to limit the scope of the list iterator to the list traversal loop, use a dedicated pointer pointing to the found element [1]. Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220319201454.2511733-1-jakobkoschel@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22binder: hold fd_install until allocating fds firstCarlos Llamas
Al noted in [1] that fd_install can't be undone, so it must come last in the fd translation sequence, only after we've successfully reserved all descriptors and copied them into the transaction buffer. This patch takes Al's proposed fix in [2] and makes a few tweaks to fold the traversal of t->fd_fixups during release. [1] https://lore.kernel.org/driverdev-devel/YHnJwRvUhaK3IM0l@zeniv-ca.linux.org.uk [2] https://lore.kernel.org/driverdev-devel/YHo6Ln9VI1T7RmLK@zeniv-ca.linux.org.uk Cc: Christian Brauner <christian.brauner@ubuntu.com> Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Todd Kjos <tkjos@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20220325232454.2210817-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22firmware: xilinx: enable feature check for ZynqMPRonak Jain
Enable the feature check if the PM_FEATURE_CHECK API returns success with the supported version for the ZynqMP. Currently, it is enabled for Versal only. Move get_set_conduit_method() at the beginning as the Linux is requesting to TF-A for the PM_FEATURE_CHECK API version for which the interface should be enabled with TF-A. Signed-off-by: Ronak Jain <ronak.jain@xilinx.com> Link: https://lore.kernel.org/r/1649242526-17493-5-git-send-email-ronak.jain@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22firmware: xilinx: always check API version for IOCTL/QUERYRonak Jain
Currently, we are not checking feature check version for PM APIs as the support may or may not there in the firmware. To check the whether the feature check API is supported or not in the firmware, allow checking for its own version. Signed-off-by: Ronak Jain <ronak.jain@xilinx.com> Link: https://lore.kernel.org/r/1649242526-17493-4-git-send-email-ronak.jain@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22firmware: xilinx: add new function for do_feature_check_callRonak Jain
Add new function for sending feature check request to firmware and call it from zynqmp_pm_feature(). Signed-off-by: Ronak Jain <ronak.jain@xilinx.com> Link: https://lore.kernel.org/r/1649242526-17493-3-git-send-email-ronak.jain@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22firmware: xilinx: add support for IOCTL and QUERY ID feature checkRonak Jain
Add support to check if IOCTL ID or QUERY ID is supported in firmware or not. Signed-off-by: Ronak Jain <ronak.jain@xilinx.com> Link: https://lore.kernel.org/r/1649242526-17493-2-git-send-email-ronak.jain@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22Merge tag 'lkdtm-next' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next Kees writes: lkdtm updates for next Christophe Leroy (1): lkdtm/bugs: Don't expect thread termination without CONFIG_UBSAN_TRAP Jiasheng Jiang (1): lkdtm/bugs: Check for the NULL pointer after calling kmalloc Kees Cook (4): lkdtm/heap: Note conditions for SLAB_LINEAR_OVERFLOW lkdtm/usercopy: Expand size of "out of frame" object lkdtm: Move crashtype definitions into each category lkdtm: Add CFI_BACKWARD to test ROP mitigations * tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm: Add CFI_BACKWARD to test ROP mitigations lkdtm: Move crashtype definitions into each category lkdtm/bugs: Don't expect thread termination without CONFIG_UBSAN_TRAP lkdtm/usercopy: Expand size of "out of frame" object lkdtm/heap: Note conditions for SLAB_LINEAR_OVERFLOW lkdtm/bugs: Check for the NULL pointer after calling kmalloc
2022-04-20tty: synclink_cs: Use bitwise instead of arithmetic operator for flagsHaowen Bai
This silences the following coccinelle warning: drivers/s390/char/tape_34xx.c:360:38-39: WARNING: sum of probable bitmasks, consider | we will try to make code cleaner Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1647846757-946-1-git-send-email-baihaowen@meizu.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20accessiblity: speakup: cleanup commentsTom Rix
Replace for spelling keypresses to key presses bytesize to byte size specificly to specifically Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220329195401.3220408-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-16lkdtm: Add CFI_BACKWARD to test ROP mitigationsKees Cook
In order to test various backward-edge control flow integrity methods, add a test that manipulates the return address on the stack. Currently only arm64 Pointer Authentication and Shadow Call Stack is supported. $ echo CFI_BACKWARD | cat >/sys/kernel/debug/provoke-crash/DIRECT Under SCS, successful test of the mitigation is reported as: lkdtm: Performing direct entry CFI_BACKWARD lkdtm: Attempting unchecked stack return address redirection ... lkdtm: ok: redirected stack return address. lkdtm: Attempting checked stack return address redirection ... lkdtm: ok: control flow unchanged. Under PAC, successful test of the mitigation is reported by the PAC exception handler: lkdtm: Performing direct entry CFI_BACKWARD lkdtm: Attempting unchecked stack return address redirection ... lkdtm: ok: redirected stack return address. lkdtm: Attempting checked stack return address redirection ... Unable to handle kernel paging request at virtual address bfffffc0088d0514 Mem abort info: ESR = 0x86000004 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault [bfffffc0088d0514] address between user and kernel address ranges ... If the CONFIGs are missing (or the mitigation isn't working), failure is reported as: lkdtm: Performing direct entry CFI_BACKWARD lkdtm: Attempting unchecked stack return address redirection ... lkdtm: ok: redirected stack return address. lkdtm: Attempting checked stack return address redirection ... lkdtm: FAIL: stack return address was redirected! lkdtm: This is probably expected, since this kernel was built *without* CONFIG_ARM64_PTR_AUTH_KERNEL=y nor CONFIG_SHADOW_CALL_STACK=y Co-developed-by: Dan Li <ashimida@linux.alibaba.com> Signed-off-by: Dan Li <ashimida@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/lkml/20220416001103.1524653-1-keescook@chromium.org
2022-04-12lkdtm: Move crashtype definitions into each categoryKees Cook
It's long been annoying that to add a new LKDTM test one had to update lkdtm.h and core.c to get it "registered". Switch to a per-category list and update the crashtype walking code in core.c to handle it. This also means that all the lkdtm_* tests themselves can be static now. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2022-04-12lkdtm/bugs: Don't expect thread termination without CONFIG_UBSAN_TRAPChristophe Leroy
When you don't select CONFIG_UBSAN_TRAP, you get: # echo ARRAY_BOUNDS > /sys/kernel/debug/provoke-crash/DIRECT [ 102.265827] ================================================================================ [ 102.278433] UBSAN: array-index-out-of-bounds in drivers/misc/lkdtm/bugs.c:342:16 [ 102.287207] index 8 is out of range for type 'char [8]' [ 102.298722] ================================================================================ [ 102.313712] lkdtm: FAIL: survived array bounds overflow! [ 102.318770] lkdtm: Unexpected! This kernel (5.16.0-rc1-s3k-dev-01884-g720dcf79314a ppc) was built with CONFIG_UBSAN_BOUNDS=y It is not correct because when CONFIG_UBSAN_TRAP is not selected you can't expect array bounds overflow to kill the thread. Modify the logic so that when the kernel is built with CONFIG_UBSAN_BOUNDS but without CONFIG_UBSAN_TRAP, you get a warning about CONFIG_UBSAN_TRAP not been selected instead. This also require a fix of pr_expected_config(), otherwise the following error is encountered. CC drivers/misc/lkdtm/bugs.o drivers/misc/lkdtm/bugs.c: In function 'lkdtm_ARRAY_BOUNDS': drivers/misc/lkdtm/bugs.c:351:2: error: 'else' without a previous 'if' 351 | else | ^~~~ Fixes: c75be56e35b2 ("lkdtm/bugs: Add ARRAY_BOUNDS to selftests") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/363b58690e907c677252467a94fe49444c80ea76.1649704381.git.christophe.leroy@csgroup.eu
2022-04-12lkdtm/usercopy: Expand size of "out of frame" objectKees Cook
To be sufficiently out of range for the usercopy test to see the lifetime mismatch, expand the size of the "bad" buffer, which will let it be beyond current_stack_pointer regardless of stack growth direction. Paired with the recent addition of stack depth checking under CONFIG_HARDENED_USERCOPY=y, this will correctly start tripping again. Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/lkml/762faf1b-0443-5ddf-4430-44a20cf2ec4d@collabora.com/ Signed-off-by: Kees Cook <keescook@chromium.org>
2022-04-12lkdtm/heap: Note conditions for SLAB_LINEAR_OVERFLOWKees Cook
It wasn't clear when SLAB_LINEAR_OVERFLOW would be expected to trip. Explicitly describe it and include the CONFIGs in the kselftest. Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2022-04-12lkdtm/bugs: Check for the NULL pointer after calling kmallocJiasheng Jiang
As the possible failure of the kmalloc(), the not_checked and checked could be NULL pointer. Therefore, it should be better to check it in order to avoid the dereference of the NULL pointer. Also, we need to kfree the 'not_checked' and 'checked' to avoid the memory leak if fails. And since it is just a test, it may directly return without error number. Fixes: ae2e1aad3e48 ("drivers/misc/lkdtm/bugs.c: add arithmetic overflow and array bounds checks") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220120092936.1874264-1-jiasheng@iscas.ac.cn
2022-04-10Linux 5.18-rc2Linus Torvalds
2022-04-10Merge tag 'tty-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fix from Greg KH: "This is a single serial driver fix for a build issue that showed up due to changes that came in through the tty tree in 5.18-rc1 that were missed previously. It resolves a build error with the mpc52xx_uart driver. It has been in linux-next this week with no reported problems" * tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.
2022-04-10Merge tag 'staging-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fix from Greg KH: "Here is a single staging driver fix for 5.18-rc2 that resolves an endian issue for the r8188eu driver. It has been in linux-next all this week with no reported problems" * tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: Fix PPPoE tag insertion on little endian systems
2022-04-10Merge tag 'driver-core-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are two small driver core changes for 5.18-rc2. They are the final bits in the removal of the default_attrs field in struct kobj_type. I had to wait until after 5.18-rc1 for all of the changes to do this came in through different development trees, and then one new user snuck in. So this series has two changes: - removal of the default_attrs field in the powerpc/pseries/vas code. The change has been acked by the PPC maintainers to come through this tree - removal of default_attrs from struct kobj_type now that all in-kernel users are removed. This cleans up the kobject code a little bit and removes some duplicated functionality that confused people (now there is only one way to do default groups) Both of these have been in linux-next for all of this week with no reported problems" * tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kobject: kobj_type: remove default_attrs powerpc/pseries/vas: use default_groups in kobj_type
2022-04-10Merge tag 'char-misc-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fix from Greg KH: "A single driver fix. It resolves the build warning issue on 32bit systems in the habannalabs driver that came in during the 5.18-rc1 merge cycle. It has been in linux-next for all this week with no reported problems" * tag 'char-misc-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: Fix test build failures
2022-04-10Merge tag 'powerpc-5.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the guest could be lost (or delayed until the next guest exit). - Disable SCV (system call vectored) when PR KVM guests could be run. - Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR guests. - Add a new KVM CAP to indicate if AIL == 3 is supported. - Fix a regression when hotplugging a CPU to a memoryless/cpuless node. - Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which fixes crashes seen due to hardened usercopy. - Revert a change to max_mapnr which broke HIGHMEM. Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin, and Srikar Dronamraju. * tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc: Set max_mapnr correctly" powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h powerpc/numa: Handle partially initialized numa nodes powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3 KVM: PPC: Book3S PR: Disallow AIL != 0 KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled KVM: PPC: Book3S HV P9: Fix "lost kick" race
2022-04-10Merge tag 'irq-urgent-2022-04-10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - A fix for a long standing bug in the ARM GICv3 redistributor polling which uses the wrong bit number to test. - Prevent translation of bogus ACPI table entries which map device interrupts into the IPI space on ARM GICs. - Don't write into the pending register of ARM GICV4 before the scan in hardware has completed. - A set of build and correctness fixes for the Qualcomm MPM driver" * tag 'irq-urgent-2022-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic, gic-v3: Prevent GSI to SGI translations irqchip/gic-v3: Fix GICR_CTLR.RWP polling irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling irqchip/irq-qcom-mpm: fix return value check in qcom_mpm_init() irq/qcom-mpm: Fix build error without MAILBOX
2022-04-10Merge tag 'x86_urgent_for_v5.18_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix the MSI message data struct definition - Use local labels in the exception table macros to avoid symbol conflicts with clang LTO builds - A couple of fixes to objtool checking of the relatively newly added SLS and IBT code - Rename a local var in the WARN* macro machinery to prevent shadowing * tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msi: Fix msi message data shadow struct x86/extable: Prefer local labels in .set directives x86,bpf: Avoid IBT objtool warning objtool: Fix SLS validation for kcov tail-call replacement objtool: Fix IBT tail-call detection x86/bug: Prevent shadowing in __WARN_FLAGS x86/mm/tlb: Revert retpoline avoidance approach
2022-04-10Merge tag 'perf_urgent_for_v5.18_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - A couple of fixes to cgroup-related handling of perf events - A couple of fixes to event encoding on Sapphire Rapids - Pass event caps of inherited events so that perf doesn't fail wrongly at fork() - Add support for a new Raptor Lake CPU * tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Always set cpuctx cgrp when enable cgroup event perf/core: Fix perf_cgroup_switch() perf/core: Use perf_cgroup_info->active to check if cgroup is active perf/core: Don't pass task around when ctx sched in perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids perf/x86/intel: Don't extend the pseudo-encoding to GP counters perf/core: Inherit event_caps perf/x86/uncore: Add Raptor Lake uncore support perf/x86/msr: Add Raptor Lake CPU support perf/x86/cstate: Add Raptor Lake support perf/x86: Add Intel Raptor Lake support
2022-04-10Merge tag 'locking_urgent_for_v5.18_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: - Allow the compiler to optimize away unused percpu accesses and change the local_lock_* macros back to inline functions - A couple of fixes to static call insn patching * tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "mm/page_alloc: mark pagesets as __maybe_unused" Revert "locking/local_lock: Make the empty local_lock_*() function a macro." x86/percpu: Remove volatile from arch_raw_cpu_ptr(). static_call: Remove __DEFINE_STATIC_CALL macro static_call: Properly initialise DEFINE_STATIC_CALL_RET0() static_call: Don't make __static_call_return0 static x86,static_call: Fix __static_call_return0 for i386
2022-04-10Merge tag 'sched_urgent_for_v5.18_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Use the correct static key checking primitive on the IRQ exit path - Two fixes for the new forceidle balancer * tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Fix compile error in dynamic_irqentry_exit_cond_resched() sched: Teach the forced-newidle balancer about CPU affinity limitation. sched/core: Fix forceidle balancing
2022-04-09Merge tag 'perf-tools-fixes-for-v5.18-2022-04-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix the clang command line option probing and remove some options to filter out, fixing the build with the latest clang versions - Fix 'perf bench' futex and epoll benchmarks to deal with machines with more than 1K CPUs - Fix 'perf test tsc' error message when not supported - Remap perf ring buffer if there is no space for event, fixing perf usage in 32-bit ChromeOS - Drop objdump stderr to avoid getting stuck waiting for stdout output in 'perf annotate' - Fix up garbled output by now showing unwind error messages when augmenting frame in best effort mode - Fix perf's libperf_print callback, use the va_args eprintf() variant - Sync vhost and arm64 cputype headers with the kernel sources - Fix 'perf report --mem-mode' with ARM SPE - Add missing external commands ('iiostat', etc) to 'perf --list-cmds' * tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output perf tools: Add external commands to list-cmds perf docs: Add perf-iostat link to manpages perf session: Remap buf if there is no space for event perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K perf tools: Fix perf's libperf_print callback perf: arm-spe: Fix perf report --mem-mode perf unwind: Don't show unwind error messages when augmenting frame pointer stack tools headers arm64: Sync arm64's cputype.h with the kernel sources perf test tsc: Fix error message when not supported perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13 perf python: Fix probing for some clang command line options tools build: Filter out options and warnings not supported by clang tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts tools include UAPI: Sync linux/vhost.h with the kernel sources
2022-04-09Merge tag 'cxl+nvdimm-for-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull cxl and nvdimm fixes from Dan Williams: - Fix a compile error in the nvdimm unit tests - Fix a shadowed variable warning in the CXL PCI driver * tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: cxl/pci: Drop shadowed variable tools/testing/nvdimm: Fix security_init() symbol collision
2022-04-09Merge tag 'gpio-fixes-for-v5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - fix a race condition with consumers accessing the fields of GPIO IRQ chips before they're fully initialized * tag 'gpio-fixes-for-v5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: Restrict usage of GPIO chip irq members before initialization
2022-04-09Merge tag 'irqchip-fixes-5.18-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix GICv3 polling for RWP in redistributors - Reject ACPI attempts to use SGIs on GIC/GICv3 - Fix unpredictible behaviour when making a VPE non-resident with GICv4 - A couple of fixes for the newly merged qcom-mpm driver Link: https://lore.kernel.org/lkml/20220409094229.267649-1-maz@kernel.org
2022-04-09perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout ↵Ian Rogers
output If objdump writes to stderr it can block waiting for it to be read. As perf doesn't read stderr then progress stops with perf waiting for stdout output. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Denis Nikitin <denik@chromium.org> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Lexi Shao <shaolexi@huawei.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: William Cohen <wcohen@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20220407230503.1265036-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf tools: Add external commands to list-cmdsMichael Petlan
The `perf --list-cmds` output prints only internal commands, although there is no reason for that from users' perspective. Adding the external commands to commands array with NULL function pointer allows printing all perf commands while not changing the logic of command handler selection. Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220404221541.30312-2-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf docs: Add perf-iostat link to manpagesMichael Petlan
Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220404221541.30312-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf session: Remap buf if there is no space for eventDenis Nikitin
If a perf event doesn't fit into remaining buffer space return NULL to remap buf and fetch the event again. Keep the logic to error out on inadequate input from fuzzing. This fixes perf failing on ChromeOS (with 32b userspace): $ perf report -v -i perf.data ... prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data? Error: failed to process sample Fixes: 57fc032ad643ffd0 ("perf session: Avoid infinite loop when seeing invalid header.size") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Denis Nikitin <denik@chromium.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220330031130.2152327-1-denik@chromium.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: - add support for new devices (ufs, mvsas) - a major set of fixes in lpfc - get rid of a driver specific ioctl in pcmraid - a major rework of aha152x to get rid of the scsi_pointer. - minor fixes and obvious changes including several spelling updates. * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits) scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan scsi: ufs: ufshpb: Fix a NULL check on list iterator scsi: sd: Clean up gendisk if device_add_disk() failed scsi: message: fusion: Remove redundant variable dmp scsi: mvsas: Add PCI ID of RocketRaid 2640 scsi: sd: sd_read_cpr() requires VPD pages scsi: mpt3sas: Fail reset operation if config request timed out scsi: sym53c500_cs: Stop using struct scsi_pointer scsi: ufs: ufs-pci: Add support for Intel MTL scsi: mpt3sas: Fix mpt3sas_check_same_4gb_region() kdoc comment scsi: scsi_debug: Fix sdebug_blk_mq_poll() in_use_bm bitmap use scsi: bnx2i: Fix spelling mistake "mis-match" -> "mismatch" scsi: bnx2fc: Fix spelling mistake "mis-match" -> "mismatch" scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one() scsi: aic7xxx: Use standard PCI subsystem, subdevice defines scsi: ufs: qcom: Drop custom Android boot parameters scsi: core: sysfs: Remove comments that conflict with the actual logic scsi: hisi_sas: Remove stray fallthrough annotation scsi: virtio-scsi: Eliminate anonymous module_init & module_exit scsi: isci: Fix spelling mistake "doesnt" -> "doesn't" ...
2022-04-09perf bench: Fix epoll bench to correct usage of affinity for machines with ↵Athira Rajeev
#CPUs > 1K The 'perf bench epoll' testcase fails on systems with more than 1K CPUs. Testcase: perf bench epoll all Result snippet: <<>> Run summary [PID 106497]: 1399 threads monitoring on 64 file-descriptors for 8 secs. perf: pthread_create: No such file or directory <<>> In epoll benchmarks (ctl, wait) pthread_create is invoked in do_threads from respective bench_epoll_* function. Though the logs shows direct failure from pthread_create, the actual failure is from "sched_setaffinity" returning EINVAL (invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros. Patch addresses this by fixing all the epoll benchmarks to use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the mask. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220406175113.87881-3-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 02:17:52 +0000