aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-14sctp: Make the address lists per network namespaceEric W. Biederman
- Move the address lists into struct net - Add per network namespace initialization and cleanup - Pass around struct net so it is everywhere I need it. - Rename all of the global variable references into references to the variables moved into struct net Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14sctp: Make the association hashtable handle multiple network namespacesEric W. Biederman
- Use struct net in the hash calculation - Use sock_net(association.base.sk) in the association lookups. - On receive calculate the network namespace from skb->dev. - Pass struct net from receive down to the functions that actually do the association lookup. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14sctp: Make the endpoint hashtable handle multiple network namespacesEric W. Biederman
- Use struct net in the hash calculation - Use sock_net(endpoint.base.sk) in the endpoint lookups. - On receive calculate the network namespace from skb->dev. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14sctp: Make the port hash table use struct net in it's key.Eric W. Biederman
- Add struct net into the port hash table hash calculation - Add struct net inot the struct sctp_bind_bucket so there is a memory of which network namespace a port is allocated in. No need for a ref count because sctp_bind_bucket only exists when there are sockets in the hash table and sockets can not change their network namspace, and sockets already ref count their network namespace. - Add struct net into the key comparison when we are testing to see if we have found the port hash table entry we are looking for. With these changes lookups in the port hash table becomes safe to use in multiple network namespaces. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14packet: Report socket mclist info via diag modulePavel Emelyanov
The info is reported as an array of packet_diag_mclist structures. Each includes not only the directly configured values (index, type, etc), but also the "count". Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14packet: Report more packet sk info via diag modulePavel Emelyanov
This reports in one rtattr message all the other scalar values, that can be set on a packet socket with setsockopt. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14packet: Diag core and basic socket info dumpingPavel Emelyanov
The diag module can be built independently from the af_packet.ko one, just like it's done in unix sockets. The core dumping message carries the info available at socket creation time, i.e. family, type and protocol (in the same byte order as shown in the proc file). The socket inode number and cookie is reserved for future per-socket info retrieving. The per-protocol filtering is also reserved for future by requiring the sdiag_protocol to be zero. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14packet: Introduce net/packet/internal.h headerPavel Emelyanov
The diag module will need to access some private packet_sock data, so move it to a header in advance. This file will be shared between the af_packet.c and the diag.c Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: ipv4: fib_trie: Don't unnecessarily search for already found fib leafIgor Maravic
We've already found leaf, don't search for it again. Same is for fib leaf info. Signed-off-by: Igor Maravic <igorm@etf.rs> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14Replace rwlock on xfrm_policy_afinfo with rcuPriyanka Jain
xfrm_policy_afinfo is read mosly data structure. Write on xfrm_policy_afinfo is done only at the time of configuration. So rwlocks can be safely replaced with RCU. RCUs usage optimizes the performance. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14gre: Support GRE over IPv6xeb@mail.ru
GRE over IPv6 implementation. Signed-off-by: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: remove netdev_bonding_change()Amerigo Wang
I don't see any benifits to use netdev_bonding_change() than using call_netdevice_notifiers() directly. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: move and rename netif_notify_peers()Amerigo Wang
I believe net/core/dev.c is a better place for netif_notify_peers(), because other net event notify functions also stay in this file. And rename it to netdev_notify_peers(). Cc: David S. Miller <davem@davemloft.net> Cc: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09hyperv: Add comments for the extended buffer after RNDIS messageHaiyang Zhang
Reported-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09net: Loopback ifindex is constant nowPavel Emelyanov
As pointed out, there are places, that access net->loopback_dev->ifindex and after ifindex generation is made per-net this value becomes constant equals 1. So go ahead and introduce the LOOPBACK_IFINDEX constant and use it where appropriate. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09net: Make ifindex generation per-net namespacePavel Emelyanov
Strictly speaking this is only _really_ required for checkpoint-restore to make loopback device always have the same index. This change appears to be safe wrt "ifindex should be unique per-system" concept, as all the ifindex usage is either already made per net namespace of is explicitly limited with init_net only. There are two cool side effects of this. The first one -- ifindices of devices in container are always small, regardless of how many containers we've started (and re-started) so far. The second one is -- we can speed up the loopback ifidex access as shown in the next patch. v2: Place ifindex right after dev_base_seq : avoid two holes and use the same cache line, dirtied in list_netdevice()/unlist_netdevice() Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09veth: Allow to create peer link with given ifindexPavel Emelyanov
The ifinfomsg is in there (thanks kaber@ for foreseeing this long time ago), so take the given ifidex and register netdev with it. Ben noticed, that this code path previously ignored ifmp->ifi_index and userland could be passing in garbage. Thus it may now fail occasionally because the value clashes with an existing interface. To address this it's assumed that if the caller specifies the ifindex for the veth master device, then it's aware of this possibility and should explicitly specify (or set to 0 for auto-assignment) the peer's ifindex as well. With this the compatibility with old tools not setting ifindex is preserved. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09net: Allow to create links with given ifindexPavel Emelyanov
Currently the RTM_NEWLINK results in -EOPNOTSUPP if the ifinfomsg->ifi_index is not zero. I propose to allow requesting ifindices on link creation. This is required by the checkpoint-restore to correctly restore a net namespace (i.e. -- a container). Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09net: Dont use ifindices in hash fnsPavel Emelyanov
Eric noticed, that when there will be devices with equal indices, some hash functions that use them will become less effective as they could. Fix this in advance by mixing the net_device address into the hash value instead of the device index. This is true for arp and ndisc hash fns. The netlabel, can and llc ones are also ifindex-based, but that three are init_net-only, thus will not be affected. Many thanks to David and Eric for the hash32_ptr implementation! Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09time: jiffies_delta_to_clock_t() helper to the rescueEric Dumazet
Various /proc/net files sometimes report crazy timer values, expressed in clock_t units. This happens when an expired timer delta (expires - jiffies) is passed to jiffies_to_clock_t(). This function has an overflow in : return div_u64((u64)x * TICK_NSEC, NSEC_PER_SEC / USER_HZ); commit cbbc719fccdb8cb (time: Change jiffies_to_clock_t() argument type to unsigned long) only got around the problem. As we cant output negative values in /proc/net/tcp without breaking various tools, I suggest adding a jiffies_delta_to_clock_t() wrapper that caps the negative delta to a 0 value. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: hank <pyu@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-07fib: use __fls() on non null argumentEric Dumazet
__fls(x) is a bit faster than fls(x), granted we know x is non null. As Ben Hutchings pointed out, fls(x) = __fls(x) + 1 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-07net: output path optimizationsEric Dumazet
1) Avoid dirtying neighbour's confirmed field. TCP workloads hits this cache line for each incoming ACK. Lets write n->confirmed only if there is a jiffie change. 2) Optimize neigh_hh_output() for the common Ethernet case, were hh_len is less than 16 bytes. Replace the memcpy() call by two inlined 64bit load/stores on x86_64. Bench results using udpflood test, with -C option (MSG_CONFIRM flag added to sendto(), to reproduce the n->confirmed dirtying on UDP) 24 threads doing 1.000.000 UDP sendto() on dummy device, 4 runs. before : 2.247s, 2.235s, 2.247s, 2.318s after : 1.884s, 1.905s, 1.891s, 1.895s Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-07documentation: dt: bindings: cpsw: fixing the examples for directly using it ↵Mugunthan V N
in dts file Fixing the cpsw device tree example to make it simpler to copy pastable to dts file and use it directly. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-07drivers: net: ethernet: davince_mdio: device tree implementationMugunthan V N
device tree implementation for davinci mdio driver Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-06tcp: ecn: dont delay ACKS after CEEric Dumazet
While playing with CoDel and ECN marking, I discovered a non optimal behavior of receiver of CE (Congestion Encountered) segments. In pathological cases, sender has reduced its cwnd to low values, and receiver delays its ACK (by 40 ms). While RFC 3168 6.1.3 (The TCP Receiver) doesn't explicitly recommend to send immediate ACKS, we believe its better to not delay ACKS, because a CE segment should give same signal than a dropped segment, and its quite important to reduce RTT to give ECE/CWR signals as fast as possible. Note we already call tcp_enter_quickack_mode() from TCP_ECN_check_ce() if we receive a retransmit, for the same reason. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-06net: tcp: GRO should be ECN friendlyEric Dumazet
While doing TCP ECN tests, I discovered GRO was reordering packets if it receives one packet with CE set, while previous packets in same NAPI run have ECT(0) for the same flow : 09:25:25.857620 IP (tos 0x2,ECT(0), ttl 64, id 27893, offset 0, flags [DF], proto TCP (6), length 4396) 172.30.42.19.54550 > 172.30.42.13.44139: Flags [.], seq 233801:238145, ack 1, win 115, options [nop,nop,TS val 3397779 ecr 1990627], length 4344 09:25:25.857626 IP (tos 0x3,CE, ttl 64, id 27892, offset 0, flags [DF], proto TCP (6), length 1500) 172.30.42.19.54550 > 172.30.42.13.44139: Flags [.], seq 232353:233801, ack 1, win 115, options [nop,nop,TS val 3397779 ecr 1990627], length 1448 09:25:25.857638 IP (tos 0x0, ttl 64, id 34581, offset 0, flags [DF], proto TCP (6), length 64) 172.30.42.13.44139 > 172.30.42.19.54550: Flags [.], cksum 0xac8f (incorrect -> 0xca69), ack 232353, win 1271, options [nop,nop,TS val 1990627 ecr 3397779,nop,nop,sack 1 {233801:238145}], length 0 We have two problems here : 1) GRO reorders packets If NIC gave packet1, then packet2, which happen to be from "different flows" GRO feeds stack with packet2, then packet1. I have yet to understand how to solve this problem. 2) GRO is not ECN friendly Delivering packets out of order makes TCP stack not as fast as it could be. In this patch I suggest we make the tos test not part of the 'same_flow' determination, but part of the 'should flush' logic Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-06net: reorganize IP MIB valuesEric Dumazet
Reduce IP latencies by placing hot MIB IP fields in a single cache line. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-06net: avoid reloads in SNMP_UPD_PO_STATSEric Dumazet
Avoid two instructions to reload dev->nd_net->mib.ip_statistics pointer, unsing a temp variable, in ip_rcv(), ip_output() paths for example. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-04ipv4: Introduce IN_DEV_NET_ROUTE_LOCALNETEric Dumazet
performance profiles show a high cost in the IN_DEV_ROUTE_LOCALNET() call done in ip_route_input_slow(), because of multiple dereferences, even if cache lines are clean and available in cpu caches. Since we already have the 'net' pointer, introduce IN_DEV_NET_ROUTE_LOCALNET() macro avoiding two dereferences (dev_net(in_dev->dev)) Also change the tests to use IN_DEV_NET_ROUTE_LOCALNET() only if saddr or/and daddr are loopback addresse. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-04ipv4: change inet_addr_hash()Eric Dumazet
Use net_hash_mix(net) instead of hash_ptr(net, 8), and use hash_32() instead of using a serie of XOR Define IN4_ADDR_HSIZE_SHIFT for clarity __ip_dev_find() can perform the net_eq() call only if ifa_local matches the key, to avoid unneeded dereferences. remove inline attributes # size net/ipv4/devinet.o.before net/ipv4/devinet.o text data bss dec hex filename 17471 2545 2048 22064 5630 net/ipv4/devinet.o.before 17335 2545 2048 21928 55a8 net/ipv4/devinet.o Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-04net: skb_share_check() should use consume_skb()Eric Dumazet
In order to avoid false drop_monitor indications, we should call consume_skb() if skb_clone() was successful. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03Merge branch 'master' of git://kernel.ubuntu.com/rtg/net-nextDavid S. Miller
2012-08-03drivers: net: ethernet: cpsw: Add device tree support to CPSWMugunthan V N
This patch adds device tree support for cpsw driver Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03drivers: net: ethernet: cpsw: Add SOC dependency support for cpsw dependent ↵Mugunthan V N
modules cpsw is dependent on davinci_cpdma and davinci_mdio, so adding SOC support for dependent modules Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03ppp: add 64 bit statsKevin Groeneveld
Add 64 bit stats to ppp driver. The 64 bit stats include tx_bytes, rx_bytes, tx_packets and rx_packets. Other stats are still 32 bit. The 64 bit stats can be retrieved via the ndo_get_stats operation. The SIOCGPPPSTATS ioctl is still 32 bit stats only. Signed-off-by: Kevin Groeneveld <kgroeneveld@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03team: add support for queue override by setting queue_id for portJiri Pirko
Similar to what bonding has. This allows to set queue_id for port so this port will be used when skb with matching skb->queue_mapping is going to be transmitted. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03team: add per port priority optionJiri Pirko
Allow userspace to set port priority. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03team: add signed 32-bit team option typeJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03netlink: add signed typesJiri Pirko
Signed types might be needed in NL communication from time to time (I need s32 in team driver), so add them. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03cris: fix eth_v10.c build errorRandy Dunlap
Fix build error on cris (not tested, no toolchain here): drivers/net/cris/eth_v10.c: error: too many arguments to function 'e100rxtx_interrupt' Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: linux-cris-kernel@axis.com Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03cdc-ncm: tag Ericsson WWAN devices (eg F5521gw) with FLAG_WWANPeter Meiser
Hello, looking at http://sourceforge.net/apps/mediawiki/mbm/index.php?title=Main_Page#Supported_devices, there are branded Ericsson devices from Dell and Toshiba. The to-be-added vendor IDs are 0x413c for Dell and 0x0930 for Toshiba. Please find attached a patch to add these vendor IDs. Signed-off-by: Peter Meiser <meiser@gmx-topmail.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03isdnloop: fix and simplify isdnloop_init()Wu Fengguang
Fix a buffer overflow bug by removing the revision and printk. [ 22.016214] isdnloop-ISDN-driver Rev 1.11.6.7 [ 22.097508] isdnloop: (loop0) virtual card added [ 22.174400] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff83244972 [ 22.174400] [ 22.436157] Pid: 1, comm: swapper Not tainted 3.5.0-bisect-00018-gfa8bbb1-dirty #129 [ 22.624071] Call Trace: [ 22.720558] [<ffffffff832448c3>] ? CallcNew+0x56/0x56 [ 22.815248] [<ffffffff8222b623>] panic+0x110/0x329 [ 22.914330] [<ffffffff83244972>] ? isdnloop_init+0xaf/0xb1 [ 23.014800] [<ffffffff832448c3>] ? CallcNew+0x56/0x56 [ 23.090763] [<ffffffff8108e24b>] __stack_chk_fail+0x2b/0x30 [ 23.185748] [<ffffffff83244972>] isdnloop_init+0xaf/0xb1 Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03hyperv: Move wait completion msg code into rndis_filter_halt_device()Haiyang Zhang
We need to wait for send_completion msg before put_rndis_request() at the end of rndis_filter_halt_device(). Otherwise, netvsc_send_completion() may reference freed memory which is overwritten, and cause panic. Reported-by: Long Li <longli@microsoft.com> Reported-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03net/mlx4_core: Remove port type restrictionsYevgeny Petrilin
Port1=Eth, Port2=IB restriction is no longer required. Having RoCE, there will always rdma port initialized over ConnectX physical port, no matter whether the link layer is IB or Ethernet. So we always have dual port IB device. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03net/mlx4_en: Fixing TX queue stop/wake flowYevgeny Petrilin
Removing the ring->blocked flag, it is redundant and leads to a race: We close the TX queue and then set the "blocked" flag. Between those 2 operations the completion function can check the "blocked" flag, sees that it is 0, and wouldn't open the TX queue. Using netif_tx_queue_stopped to check the state of the queue to avoid this race. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03net/mlx4_en: loopbacked packets are dropped when SMAC=DMACAmir Vadai
Should NOT check SMAC=DMAC when: 1. loopback is turned on 2. validate_loopback is true. Fixed it accordingly. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03net_sched: gact: Fix potential panic in tcf_gact().Hiroaki SHIMODA
gact_rand array is accessed by gact->tcfg_ptype whose value is assumed to less than MAX_RAND, but any range checks are not performed. So add a check in tcf_gact_init(). And in tcf_gact(), we can reduce a branch. Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03emulex: benet: Add a missing CR in the end of messageMasanari Iida
Missing a CR in printk causes 2 messages printed in one line. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03ath9k: Add PID/VID support for AR1111Mohammed Shafi Shajakhan
AR1111 is same as AR9485. The h/w difference between them is quite insignificant, Felix suggests only very few baseband features may not be available in AR1111. The h/w code for AR9485 is already present, so AR1111 should work fine with the addition of its PID/VID. Cc: stable@vger.kernel.org [2.6.39+] Cc: Felix Bitterli <felixb@qca.qualcomm.com> Reported-by: Tim Bentley <Tim.Bentley@Gmail.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Tested-by: Tim Bentley <Tim.Bentley@Gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-02brcmsmac: use channel flags to restrict OFDMSeth Forshee
brcmsmac cannot call freq_reg_info() during channel changes as it does not hold cfg80211_lock, and as a result it generates a lockdep warning. freq_reg_info() is being used to determine whether OFDM is allowed on the current channel, so we can avoid the errant call by using the new IEEE80211_CHAN_NO_OFDM for this purpose instead. Reported-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 00:59:49 +0000