aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-09-02bgmac: Update fixed_phy_register()Fabio Estevam
Commit a5597008dbc2 ("phy: fixed_phy: Add gpio to determine link up/down.") added a new argument to fixed_phy_register(), but missed to update bgmac driver, causing the following build failure: drivers/net/ethernet/broadcom/bgmac.c:1450:2: error: too few arguments to function 'fixed_phy_register' Add the missing argument. Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02sock, diag: fix panic in sock_diag_put_filterinfoDaniel Borkmann
diag socket's sock_diag_put_filterinfo() dumps classic BPF programs upon request to user space (ss -0 -b). However, native eBPF programs attached to sockets (SO_ATTACH_BPF) cannot be dumped with this method: Their orig_prog is always NULL. However, sock_diag_put_filterinfo() unconditionally tries to access its filter length resp. wants to copy the filter insns from there. Internal cBPF to eBPF transformations attached to sockets don't have this issue, as orig_prog state is kept. It's currently only used by packet sockets. If we would want to add native eBPF support in the future, this needs to be done through a different attribute than PACKET_DIAG_FILTER to not confuse possible user space disassemblers that work on diag data. Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Use 'const' where possible.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Fix function argument ordering dependencyTom Herbert
Commit c6cc1ca7f4d70c ("flowi: Abstract out functions to get flow hash based on flowi") introduced a bug in __skb_set_sw_hash where we require a dependency on evaluating arguments in a function in order. There is no such ordering enforced in C, so this incorrect. This patch fixes that by splitting out the arguments. This bug was found via a compiler warning that keys may be uninitialized. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-09-01 This series contains updates to i40e, ixgbe and ixgbevf. Anjali fixes a bug in i40e where the port is not receiving multicast or VLAN tagged packets in promiscuous mode. Which can occur when a software bridge is created on top of the device. Don adds support in ixgbe that indicates the presence of management firmware. Added support for entering low power link up state on devices that support it when the device is closing or suspending. Updated the driver to report unknown bus speed and width since IOSF does not report a PCIe bus speed or width for X550 devices. Also added the new bus type for integrated I/O interface (IOSF). Cleaned up of redundant code in ixgbe. Mark adds support for UDP-encapsulation transmit checksum and for VXLAN receive offloads. Introduces a helper function to do the register access and processing to avoid needless PHY access on copper PHYs. Added support for reporting 2.5G link speed. Fixed warnings resulting from redundant initializations of the get_bus_info field. Maninder Singh updates the ixgbe driver to use kzalloc instead of kcalloc for allocation of one thing. Tom Barbette adds support for ethtool to change the rxfh indirection table and/or key using ethtool interface. Emil resolves an issue where users were not able to dynamically set number of queues for 82598 via ethtool -L. Alex Williamson removes bimodal SR-IOV disabling behavior since it is confusing to users and results in a state where the PF is broken for other uses unless the user sets sriov_numvfs to zero prior to unbinding the device. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01ixgbe: Resolve "initialized field overwritten" warningsMark Rustad
Resolve warnings resulting from redundant initialization of the get_bus_info field in the mac_ops_X550* structures. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Remove bimodal SR-IOV disablingAlex Williamson
When unbinding an SR-IOV device with VFs configured from ixgbe, the driver behaves in one of two ways. If max_vfs was specified, the SR-IOV state is disabled, removing the VFs. The occurs regardless of whether the VF count was later modified through sysfs. If however max_vfs is zero, such as by not specifying the module parameter, the VFs persist after the PF is unbound from ixgbe. If the PF is then bound to vfio-pci to be assigned to a VM, the PF is non-functional. >From the comment, commit da36b64736cf ("ixgbe: Implement PCI SR-IOV sysfs callback operation") clearly intended this alternate behavior, but probably didn't realize the PF doesn't work in this mode. This bimodal behavior is confusing to users and results in a state where the PF is broken for other uses unless the user sets sriov_numvfs to zero prior to unbinding the device. Remove this behavior so that VFs are removed and the PF is functional for other uses after unbind, regardless of the way VFs are enabled. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Add support for reporting 2.5G link speedMark Rustad
Now that we can do 2.5G link speed, we need to be able to report it. Also change the nested triadic involved in creating the log message to instead use a simpler switch statement to set a string pointer. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: fix bounds checking in ixgbe_setup_tc for 82598Emil Tantilov
This patch resolves an issue where users were not able to dynamically set number of queues for 82598 via ethtool -L Reported-by: Tal Abudi <talabudi@gmail.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: support for ethtool set_rxfhTom Barbette
Allows to change the rxfh indirection table and/or key using ethtool interface. Signed-off-by: Tom Barbette <tom.barbette@ulg.ac.be> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Avoid needless PHY access on copper physMark Rustad
Avoid a needless PHY access on copper phys to save the 10ms wait time for each PHY access. A helper function is introduced to actually do the register access and process the contents. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: cleanup to use cached mask valueDon Skidmore
We already cache this FW/SW semaphore mask so might as well use it for consistency. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Remove second instance of lan_id variableDon Skidmore
This patch removes the redundant lan_id in the phy struct and uses the bus version. Both variables exist and intend to represent the STATUS register LAN_ID field. However, phy.lan_id is not bit shifted so the phy.lan_id = 0x0 for LAN Id 0 and phy.lan_id = 0x4 for LAN Id 1. Where bus.lan_id is bit shifted so bus.lan_id = 0x0 for LAN Id 0 and bus.lan_id = 0x1 for LAN Id 1. There seems no need for the additional lan_id variable and this should make the code less confusing. Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: use kzalloc for allocating one thingManinder Singh
Use kzalloc rather than kcalloc(1.. The semantic patch that makes this change is as follows: // <smpl> @@ @@ - kcalloc(1, + kzalloc( ...) // </smpl> and removing checkpatch below CHECK: CHECK: Prefer kzalloc(sizeof(*fwd_adapter)...) over kzalloc(sizeof(struct ixgbe_fwd_adapter)...) Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Reviewed-by: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01flow: Move __get_hash_from_flowi{4,6} into flow_dissector.cDavid S. Miller
These cannot live in net/core/flow.c which only builds when XFRM is enabled. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01ixgbe: Remove unused PCI bus typesDon Skidmore
The ixgbe never has as very doubtfully ever will support either PCI or PCI-X devices. So remove the unused types from the ixgbe_bus_type. Thanks to Alex Duyck for suggesting this. Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: add new bus type for intergrated I/O interface (IOSF)Don Skidmore
With this patch we add support for a new bus type ixgbe_bus_type_internal. X550em devices use IOSF and not PCIe bus so this new type is to accommodate them. Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: add get_bus_info method for X550Don Skidmore
Added ixgbe_get_bus_info_X550em to X550 code. ixgbe_get_bus_info_X550em sets bus.width to ixgbe_bus_width_unknown and bus.speed to ixgbe_bus_speed_unknown, because IOSF does not report a PCIe bus width or speed. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Add support for entering low power link up stateDon Skidmore
When the device is closing or suspending, call ixgbe_enter_lplu to enter low power link up state on devices that support it. When this is done, prevent the phy from being reset in the ixgbe_down path so that link is present when calling ixgbe_enter_lplu. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Add support for VXLAN RX offloadsMark Rustad
Add support for VXLAN RX offloads for the X55x devices that support them. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Add support for UDP-encapsulated tx checksum offloadMark Rustad
By using GSO for UDP-encapsulated packets, all ixgbe devices can be directed to generate checksums for the inner headers because the outer UDP checksum can be zero. So point the machinery at the inner headers and have the hardware generate the checksum. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01flow_dissector: Don't use bit fields.David S. Miller
Just have a flags member instead. In file included from include/linux/linkage.h:4:0, from include/linux/kernel.h:6, from net/core/flow_dissector.c:1: In function 'flow_keys_hash_start', inlined from 'flow_hash_from_keys' at net/core/flow_dissector.c:553:34: >> include/linux/compiler.h:447:38: error: call to '__compiletime_assert_459' declared with attribute error: BUILD_BUG_ON failed: FLOW_KEYS_HASH_OFFSET % sizeof(u32) Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01ixgbe: Check whether FDIRCMD writes actually completeMark Rustad
Wait up to about 100 us for FDIRCMD writes to complete and return failure indications. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Assign set_phy_power dynamically where neededDon Skidmore
There are various reasons why this method may or may not need to be defined and some of these we don't know until runtime. So we will set the value in get_invariants. Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: add new function to check for management presenceDon Skidmore
This patch adds a support function that will indicate for the existence of management FW. Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01i40e: Set defport behavior for the Main VSI when in promiscuous modeAnjali Singhai Jain
This fixes bugs where the port is not receiving multicast or VLAN tagged packets when in promiscuous mode. This can occur when a SW bridge is created on top of the device. This also fixes issues where the promiscuous behavior setting was not being preserved across a reset caused by features being enabled or disabled. We are using defport instead of doing a true promiscuous mode because we do not need to receive the SRIOV or VMDq VSI directed traffic which would suck up bandwidth and is really not intended for the SW bridge. In addition, with defport we get VLAN promiscuous behavior which is not possible from the VSI level promiscuous setting. Change-ID: Ie21985eac32d5af1c02e9d71c6430a90d5bab40f Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01Merge branch 'flow-dissector-features'David S. Miller
Tom Herbert says: ==================== flow_dissector: Paramterize dissection and other features This patch set adds some new capabilities to flow_dissector: - Add flags to flow dissector functions to control dissection - Flag to stop dissection when L3 header is seen (don't dissect L4) - Flag to stop dissection when encapsulation is detected - Flag to parse first fragment of fragmented packet. This may provide L4 ports - Added new reporting in key_control - Packet is a fragment - Packet is a first fragment - Packet has encapsulation Also: - Make __skb_set_sw_hash a general function - Create functions to get a flow hash based on flowi4 or flowi6 structures without an reference to an skbuff - Ignore flow dissector return value from ___skb_get_hash. Just use whatever key fields are found to make a hash Tested: Ran 200 netperf TCP_RR instances for IPv6 and IPv4. Did not see any regression. Ran UDP_RR with 10000 byte request and response size for IPv4 and IPv6, no regression observed however I did see better performance with IPv6 flow labels due to use of flow labels for L4 hash. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Ignore flow dissector return value from ___skb_get_hashTom Herbert
In ___skb_get_hash ignore return value from skb_flow_dissect_flow_keys. A failure in that function likely means that there was a parse error, so we may as well use whatever fields were found before the error was hit. This is also good because it means we won't keep trying to derive the hash on subsequent calls to skb_get_hash for the same packet. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Add control/reporting of encapsulationTom Herbert
Add an input flag to flow dissector on rather dissection should stop when encapsulation is detected (IP/IP or GRE). Also, add a key_control flag that indicates encapsulation was encountered during the dissection. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Add flag to stop parsing when an IPv6 flow label is seenTom Herbert
Add an input flag to flow dissector on rather dissection should be stopped when a flow label is encountered. Presumably, the flow label is derived from a sufficient hash of an inner transport packet so further dissection is not needed (that is ports are not included in the flow hash). Using the flow label instead of ports has the additional benefit that packet fragments should hash to same value as non-fragments for a flow (assuming that the same flow label is used). We set this flag by default in for skb_get_hash. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Add flag to stop parsing at L3Tom Herbert
Add an input flag to flow dissector on rather dissection should be stopped when an L3 packet is encountered. This would be useful if a caller just wanted to get IP addresses of the outermost header (e.g. to do an L3 hash). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Support IPv6 fragment headerTom Herbert
Parse NEXTHDR_FRAGMENT. When seen account for it in the fragment bits of key_control. Also, check if first fragment should be parsed. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Add control/reporting of fragmentationTom Herbert
Add an input flag to flow dissector on rather dissection should be attempted on a first fragment. Also add key_control flags to indicate that a packet is a fragment or first fragment. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Add flags argument to skb_flow_dissector functionsTom Herbert
The flags argument will allow control of the dissection process (for instance whether to parse beyond L3). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Jump to exit code in __skb_flow_dissectTom Herbert
Instead of returning immediately (on a parsing failure for instance) we jump to cleanup code. This always sets protocol values in key_control (even on a failure there is still valid information in the key_tags that was set before the problem was hit). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flowi: Abstract out functions to get flow hash based on flowiTom Herbert
Create __get_hash_from_flowi6 and __get_hash_from_flowi4 to get the flow keys and hash based on flowi structures. These are called by __skb_get_hash_flowi6 and __skb_get_hash_flowi4. Also, created get_hash_from_flowi6 and get_hash_from_flowi4 which can be called when just the hash value for a flowi is needed. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01skbuff: Make __skb_set_sw_hash a general functionTom Herbert
Move __skb_set_sw_hash to skbuff.h and add __skb_set_hash which is a common method (between __skb_set_sw_hash and skb_set_hash) to set the hash in an skbuff. Also, move skb_clear_hash to be closer to __skb_set_hash. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Move skb related functions to skbuff.hTom Herbert
Move the flow dissector functions that are specific to skbuffs into skbuff.h out of flow_dissector.h. This makes flow_dissector.h have no dependencies on skbuff.h. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01tg3: Fix temperature reportingJean Delvare
The temperature registers appear to report values in degrees Celsius while the hwmon API mandates values to be exposed in millidegrees Celsius. Do the conversion so that the values reported by "sensors" are correct. Fixes: aed93e0bf493 ("tg3: Add hwmon support for temperature") Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: stable@vger.kernel.org [v3.6+] Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01phylib: fix device deletion order in mdiobus_unregister()Mark Salter
commit 8b63ec1837fa ("phylib: Make PHYs children of their MDIO bus, not the bus' parent.") uncovered a problem in mdiobus_unregister() which leads to this warning when I reboot an APM Mustang (arm64) platform: WARNING: CPU: 7 PID: 4239 at fs/sysfs/group.c:224 sysfs_remove_group+0xa0/0xa4() sysfs group fffffe0000e07a10 not found for kobject 'xgene-mii-eth0:03' ... CPU: 7 PID: 4239 Comm: reboot Tainted: G E 4.2.0-0.18.el7.test15.aarch64 #1 Hardware name: AppliedMicro Mustang/Mustang, BIOS 1.1.0 Aug 26 2015 Call Trace: [<fffffe000009739c>] dump_backtrace+0x0/0x170 [<fffffe000009752c>] show_stack+0x20/0x2c [<fffffe00007436f0>] dump_stack+0x78/0x9c [<fffffe00000c2cb4>] warn_slowpath_common+0xa0/0xd8 [<fffffe00000c2d60>] warn_slowpath_fmt+0x74/0x88 [<fffffe0000293d3c>] sysfs_remove_group+0x9c/0xa4 [<fffffe00004a8bac>] dpm_sysfs_remove+0x5c/0x70 [<fffffe000049b388>] device_del+0x44/0x208 [<fffffe000049b578>] device_unregister+0x2c/0x7c [<fffffe000050dc68>] mdiobus_unregister+0x48/0x94 [<fffffe000052afd0>] xgene_enet_mdio_remove+0x28/0x44 [<fffffe000052d3f0>] xgene_enet_remove+0xd0/0xd8 [<fffffe000052d424>] xgene_enet_shutdown+0x2c/0x3c [<fffffe00004a204c>] platform_drv_shutdown+0x24/0x40 [<fffffe000049d4f4>] device_shutdown+0xf0/0x1b4 [<fffffe00000e31ec>] kernel_restart_prepare+0x40/0x4c [<fffffe00000e32f8>] kernel_restart+0x1c/0x80 [<fffffe00000e3670>] SyS_reboot+0x17c/0x250 The problem is that mdiobus_unregister() deletes the bus device before unregistering the phy devices on the bus. This wasn't a problem before because the phys were not children of the bus: /sys/devices/platform/APMC0D05:00/net/eth0/xgene-mii-eth0:03 /sys/devices/platform/APMC0D05:00/net/eth0/xgene-mii-eth0 But now that they are: /sys/devices/platform/APMC0D05:00/net/eth0/xgene-mii-eth0/xgene-mii-eth0:03 when mdiobus_unregister deletes the bus device, the phy subdirs are removed from sysfs also. So when the phys are unregistered afterward, we get the warning. This patch changes the order so that phys are unregistered before the bus device is deleted. Fixes: 8b63ec1837fa ("phylib: Make PHYs children of their MDIO bus, not the bus' parent.") Signed-off-by: Mark Salter <msalter@redhat.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Mark Langsdorf <mlangsdo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01net: Make table id type u32David Ahern
A number of VRF patches used 'int' for table id. It should be u32 to be consistent with the rest of the stack. Fixes: 4e3c89920cd3a ("net: Introduce VRF related flags and helpers") 15be405eb2ea9 ("net: Add inet_addr lookup by table") 30bbaa1950055 ("net: Fix up inet_addr_type checks") 021dd3b8a142d ("net: Add routes to the table associated with the device") dc028da54ed35 ("inet: Move VRF table lookup to inlined function") f6d3c19274c74 ("net: FIB tracepoints") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31tun_dst: Remove opts_sizePravin B Shelar
opts_size is only written and never read. Following patch removes this unused variable. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31ipv6: send only one NEWLINK when RA causes changesMarius Tomaschewski
Signed-off-by: Marius Tomaschewski <mt@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31gro_cells: remove spinlock protecting receive queuesEric Dumazet
As David pointed out, spinlock are no longer needed to protect the per cpu queues used in gro cells infrastructure. Also use new napi_complete_done() API so that gro_flush_timeout tweaks have an effect. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: qmi_wwan: Sierra Wireless MC73xx -> Sierra Wireless MC7304/MC7354David Ward
Other Sierra Wireless MC73xx devices exist, with different USB IDs. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31ipv6: send NEWLINK on RA managed/otherconf changesMarius Tomaschewski
The kernel is applying the RA managed/otherconf flags silently and forgets to send ifinfo notify to inform about their change when the router provides a zero reachable_time and retrans_timer as dnsmasq and many routers send it, which just means unspecified by this router and the host should continue using whatever value it is already using. Userspace may monitor the ifinfo notifications to activate dhcpv6. Signed-off-by: Marius Tomaschewski <mt@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31Merge branch 'dsa-port-config'David S. Miller
Andrew Lunn says: ==================== DSA port configuration and status This patchset allows various switch port settings to be configured and port status to be sampled. Some of these patches have been posted before. The first three patches provide infrastructure for configuring a switch ports link speed and duplex from a fixed_link phy. Patch four then uses this infrastructure to allow the CPU and DSA ports of a switch to be configured using a fixed-link property in the device tree. Patches five and six allow a phy-mode property to be specified in the device tree, and allow this to be used for configuring RGMII delays. Patches seven through nine allow link status, for example that of an SFP module, to be read from a gpio. Changes since v1: Rewrite 9/9 so that it hopefully does not regression on 868a4215be9a6d80 ("net: phy: fixed_phy: handle link-down case") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: phy: fixed_phy: Set phy capabilities even when link down.Andrew Lunn
What features a phy supports is masked in genphy_config_init() by looking at the PHYs BMSR register. If the link is down, fixed_phy_update_regs() will only set the auto- negotiation capable bit in BMSR. Thus genphy_config_init() comes to the conclusion the PHY can only perform 10/Half, and masks out the higher speed features. If however the link it up, BMSR is set to indicate the speed the PHY is capable of auto-negotiating, and genphy_config_init() does not mask out the high speed features. To fix this, when the link is down, have fixed_phy_update_regs() leave the link status, auto-negotiation complete, and link partner capabilities unset, but set all the local capabilities depending on the fixed phy speed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31phy: fixed_phy: Add gpio to determine link up/down.Andrew Lunn
An SFP module may have a link up/down status pin which can be connection to a GPIO line of the host. Add support for reading such an GPIO in the fixed_phy driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31dsa: mv88e6xxx: Don't poll forced interfaces for state changesAndrew Lunn
When polling for link status, don't consider ports which have a forced link. Such ports don't monitor their phy or may not even have a phy. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-02 06:38:55 +0000