aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-20bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logicMichael Chan
[ Upstream commit c13e268c0768659cdaae4bfe2fb24860bcc8ddb4 ] When the chip is configured to timestamp all receive packets, the timestamp in the RX completion is only valid if the metadata present flag is not set for packets received on the wire. In addition, internal loopback packets will never have a valid timestamp and the timestamp field will always be zero. We must exclude any 0 value in the timestamp field because there is no way to determine if it is a loopback packet or not. Add a new function bnxt_rx_ts_valid() to check for all timestamp valid conditions. Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bnxt_en: Fix wrong return value check in bnxt_close_nic()Kalesh AP
[ Upstream commit bd6781c18cb5b5e5d8c5873fa9a51668e89ec76e ] The wait_event_interruptible_timeout() function returns 0 if the timeout elapsed, -ERESTARTSYS if it was interrupted by a signal, and the remaining jiffies otherwise if the condition evaluated to true before the timeout elapsed. Driver should have checked for zero return value instead of a positive value. MChan: Print a warning for -ERESTARTSYS. The close operation will proceed anyway when wait_event_interruptible_timeout() returns for any reason. Since we do the close no matter what, we should not return this error code to the caller. Change bnxt_close_nic() to a void function and remove all error handling from some of the callers. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bnxt_en: Save ring error counters across resetMichael Chan
[ Upstream commit 4c70dbe3c0087b439b9e5015057e3e378cf5d8b1 ] Currently, the ring counters are stored in the per ring datastructure. During reset, all the rings are freed together with the associated datastructures. As a result, all the ring error counters will be reset to zero. Add logic to keep track of the total error counts of all the rings and save them before reset (including ifdown). The next patch will display these total ring error counters under ethtool -S. Link: https://lore.kernel.org/netdev/CACKFLimD-bKmJ1tGZOLYRjWzEwxkri-Mw7iFme1x2Dr0twdCeg@mail.gmail.com/ Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20230817231911.165035-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: bd6781c18cb5 ("bnxt_en: Fix wrong return value check in bnxt_close_nic()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bnxt_en: Clear resource reservation during resumeSomnath Kotur
[ Upstream commit 9ef7c58f5abe41e6d91f37f28fe2d851ffedd92a ] We are issuing HWRM_FUNC_RESET cmd to reset the device including all reserved resources, but not clearing the reservations within the driver struct. As a result, when the driver re-initializes as part of resume, it believes that there is no need to do any resource reservation and goes ahead and tries to allocate rings which will eventually fail beyond a certain number pre-reserved by the firmware. Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qca_spi: Fix reset behaviorStefan Wahren
[ Upstream commit 1057812d146dd658c9a9a96d869c2551150207b5 ] In case of a reset triggered by the QCA7000 itself, the behavior of the qca_spi driver was not quite correct: - in case of a pending RX frame decoding the drop counter must be incremented and decoding state machine reseted - also the reset counter must always be incremented regardless of sync state Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-4-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qca_debug: Fix ethtool -G iface tx behaviorStefan Wahren
[ Upstream commit 96a7e861d9e04d07febd3011c30cd84cd141d81f ] After calling ethtool -g it was not possible to adjust the TX ring size again: # ethtool -g eth1 Ring parameters for eth1: Pre-set maximums: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 Current hardware settings: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 # ethtool -G eth1 tx 8 netlink error: Invalid argument The reason for this is that the readonly setting rx_pending get initialized and after that the range check in qcaspi_set_ringparam() fails regardless of the provided parameter. So fix this by accepting the exposed RX defaults. Instead of adding another magic number better use a new define here. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-3-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qca_debug: Prevent crash on TX ring changesStefan Wahren
[ Upstream commit f4e6064c97c050bd9904925ff7d53d0c9954fc7b ] The qca_spi driver stop and restart the SPI kernel thread (via ndo_stop & ndo_open) in case of TX ring changes. This is a big issue because it allows userspace to prevent restart of the SPI kernel thread (via signals). A subsequent change of TX ring wrongly assume a valid spi_thread pointer which result in a crash. So prevent this by stopping the network traffic handling and temporary park the SPI thread. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-2-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net: ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIXMaciej Żenczykowski
[ Upstream commit bd4a816752bab609dd6d65ae021387beb9e2ddbd ] Lorenzo points out that we effectively clear all unknown flags from PIO when copying them to userspace in the netlink RTM_NEWPREFIX notification. We could fix this one at a time as new flags are defined, or in one fell swoop - I choose the latter. We could either define 6 new reserved flags (reserved1..6) and handle them individually (and rename them as new flags are defined), or we could simply copy the entire unmodified byte over - I choose the latter. This unfortunately requires some anonymous union/struct magic, so we add a static assert on the struct size for a little extra safety. Cc: David Ahern <dsahern@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net/mlx5e: Fix possible deadlock on mlx5e_tx_timeout_workMoshe Shemesh
[ Upstream commit eab0da38912ebdad922ed0388209f7eb0a5163cd ] Due to the cited patch, devlink health commands take devlink lock and this may result in deadlock for mlx5e_tx_reporter as it takes local state_lock before calling devlink health report and on the other hand devlink health commands such as diagnose for same reporter take local state_lock after taking devlink lock (see kernel log below). To fix it, remove local state_lock from mlx5e_tx_timeout_work() before calling devlink_health_report() and take care to cancel the work before any call to close channels, which may free the SQs that should be handled by the work. Before cancel_work_sync(), use current_work() to check we are not calling it from within the work, as mlx5e_tx_timeout_work() itself may close the channels and reopen as part of recovery flow. While removing state_lock from mlx5e_tx_timeout_work() keep rtnl_lock to ensure no change in netdev->real_num_tx_queues, but use rtnl_trylock() and a flag to avoid deadlock by calling cancel_work_sync() before closing the channels while holding rtnl_lock too. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Not tainted ------------------------------------------------------ kworker/u16:2/65 is trying to acquire lock: ffff888122f6c2f8 (&devlink->lock_key#2){+.+.}-{3:3}, at: devlink_health_report+0x2f1/0x7e0 but task is already holding lock: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x12c/0x14b0 mlx5e_rx_reporter_diagnose+0x71/0x700 [mlx5_core] devlink_nl_cmd_health_reporter_diagnose_doit+0x212/0xa50 genl_family_rcv_msg_doit+0x1e9/0x2f0 genl_rcv_msg+0x2e9/0x530 netlink_rcv_skb+0x11d/0x340 genl_rcv+0x24/0x40 netlink_unicast+0x438/0x710 netlink_sendmsg+0x788/0xc40 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x1c1/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #0 (&devlink->lock_key#2){+.+.}-{3:3}: __lock_acquire+0x2c8a/0x6200 lock_acquire+0x1c1/0x550 __mutex_lock+0x12c/0x14b0 devlink_health_report+0x2f1/0x7e0 mlx5e_health_report+0xc9/0xd7 [mlx5_core] mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core] mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core] process_one_work+0x7c2/0x1340 worker_thread+0x59d/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock(&devlink->lock_key#2); lock(&priv->state_lock); lock(&devlink->lock_key#2); *** DEADLOCK *** 4 locks held by kworker/u16:2/65: #0: ffff88811a55b138 ((wq_completion)mlx5e#2){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340 #1: ffff888101de7db8 ((work_completion)(&priv->tx_timeout_work)){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340 #2: ffffffff84ce8328 (rtnl_mutex){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x53/0x280 [mlx5_core] #3: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] stack backtrace: CPU: 1 PID: 65 Comm: kworker/u16:2 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x57/0x7d check_noncircular+0x278/0x300 ? print_circular_bug+0x460/0x460 ? find_held_lock+0x2d/0x110 ? __stack_depot_save+0x24c/0x520 ? alloc_chain_hlocks+0x228/0x700 __lock_acquire+0x2c8a/0x6200 ? register_lock_class+0x1860/0x1860 ? kasan_save_stack+0x1e/0x40 ? kasan_set_free_info+0x20/0x30 ? ____kasan_slab_free+0x11d/0x1b0 ? kfree+0x1ba/0x520 ? devlink_health_do_dump.part.0+0x171/0x3a0 ? devlink_health_report+0x3d5/0x7e0 lock_acquire+0x1c1/0x550 ? devlink_health_report+0x2f1/0x7e0 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? find_held_lock+0x2d/0x110 __mutex_lock+0x12c/0x14b0 ? devlink_health_report+0x2f1/0x7e0 ? devlink_health_report+0x2f1/0x7e0 ? mutex_lock_io_nested+0x1320/0x1320 ? trace_hardirqs_on+0x2d/0x100 ? bit_wait_io_timeout+0x170/0x170 ? devlink_health_do_dump.part.0+0x171/0x3a0 ? kfree+0x1ba/0x520 ? devlink_health_do_dump.part.0+0x171/0x3a0 devlink_health_report+0x2f1/0x7e0 mlx5e_health_report+0xc9/0xd7 [mlx5_core] mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? mlx5e_reporter_tx_err_cqe+0x1b0/0x1b0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x70/0x70 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x320/0x320 [mlx5_core] ? mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] ? mutex_lock_io_nested+0x1320/0x1320 ? process_one_work+0x70f/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? lock_downgrade+0x6e0/0x6e0 mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core] process_one_work+0x7c2/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0x230/0x230 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x59d/0xec0 ? process_one_work+0x1340/0x1340 kthread+0x28f/0x330 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: c90005b5f75c ("devlink: Hold the instance lock in health callbacks") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20HID: lenovo: Restrict detection of patched firmware only to USB cptkbdMikhail Khvainitski
[ Upstream commit 43527a0094c10dfbf0d5a2e7979395a38de3ff65 ] Commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround") introduced a regression for ThinkPad TrackPoint Keyboard II which has similar quirks to cptkbd (so it uses the same workarounds) but slightly different so that there are false-positives during detecting well-behaving firmware. This commit restricts detecting well-behaving firmware to the only model which known to have one and have stable enough quirks to not cause false-positives. Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround") Link: https://lore.kernel.org/linux-input/ZXRiiPsBKNasioqH@jekhomev/ Link: https://bbs.archlinux.org/viewtopic.php?pid=2135468#p2135468 Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org> Tested-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20afs: Fix refcount underflow from error handling raceDavid Howells
[ Upstream commit 52bf9f6c09fca8c74388cd41cc24e5d1bff812a9 ] If an AFS cell that has an unreachable (eg. ENETUNREACH) server listed (VL server or fileserver), an asynchronous probe to one of its addresses may fail immediately because sendmsg() returns an error. When this happens, a refcount underflow can happen if certain events hit a very small window. The way this occurs is: (1) There are two levels of "call" object, the afs_call and the rxrpc_call. Each of them can be transitioned to a "completed" state in the event of success or failure. (2) Asynchronous afs_calls are self-referential whilst they are active to prevent them from evaporating when they're not being processed. This reference is disposed of when the afs_call is completed. Note that an afs_call may only be completed once; once completed completing it again will do nothing. (3) When a call transmission is made, the app-side rxrpc code queues a Tx buffer for the rxrpc I/O thread to transmit. The I/O thread invokes sendmsg() to transmit it - and in the case of failure, it transitions the rxrpc_call to the completed state. (4) When an rxrpc_call is completed, the app layer is notified. In this case, the app is kafs and it schedules a work item to process events pertaining to an afs_call. (5) When the afs_call event processor is run, it goes down through the RPC-specific handler to afs_extract_data() to retrieve data from rxrpc - and, in this case, it picks up the error from the rxrpc_call and returns it. The error is then propagated to the afs_call and that is completed too. At this point the self-reference is released. (6) If the rxrpc I/O thread manages to complete the rxrpc_call within the window between rxrpc_send_data() queuing the request packet and checking for call completion on the way out, then rxrpc_kernel_send_data() will return the error from sendmsg() to the app. (7) Then afs_make_call() will see an error and will jump to the error handling path which will attempt to clean up the afs_call. (8) The problem comes when the error handling path in afs_make_call() tries to unconditionally drop an async afs_call's self-reference. This self-reference, however, may already have been dropped by afs_extract_data() completing the afs_call (9) The refcount underflows when we return to afs_do_probe_vlserver() and that tries to drop its reference on the afs_call. Fix this by making afs_make_call() attempt to complete the afs_call rather than unconditionally putting it. That way, if afs_extract_data() manages to complete the call first, afs_make_call() won't do anything. The bug can be forced by making do_udp_sendmsg() return -ENETUNREACH and sticking an msleep() in rxrpc_send_data() after the 'success:' label to widen the race window. The error message looks something like: refcount_t: underflow; use-after-free. WARNING: CPU: 3 PID: 720 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 ... RIP: 0010:refcount_warn_saturate+0xba/0x110 ... afs_put_call+0x1dc/0x1f0 [kafs] afs_fs_get_capabilities+0x8b/0xe0 [kafs] afs_fs_probe_fileserver+0x188/0x1e0 [kafs] afs_lookup_server+0x3bf/0x3f0 [kafs] afs_alloc_server_list+0x130/0x2e0 [kafs] afs_create_volume+0x162/0x400 [kafs] afs_get_tree+0x266/0x410 [kafs] vfs_get_tree+0x25/0xc0 fc_mount+0xe/0x40 afs_d_automount+0x1b3/0x390 [kafs] __traverse_mounts+0x8f/0x210 step_into+0x340/0x760 path_openat+0x13a/0x1260 do_filp_open+0xaf/0x160 do_sys_openat2+0xaf/0x170 or something like: refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0x99/0xda ... afs_put_call+0x4a/0x175 afs_send_vl_probes+0x108/0x172 afs_select_vlserver+0xd6/0x311 afs_do_cell_detect_alias+0x5e/0x1e9 afs_cell_detect_alias+0x44/0x92 afs_validate_fc+0x9d/0x134 afs_get_tree+0x20/0x2e6 vfs_get_tree+0x1d/0xc9 fc_mount+0xe/0x33 afs_d_automount+0x48/0x9d __traverse_mounts+0xe0/0x166 step_into+0x140/0x274 open_last_lookups+0x1c1/0x1df path_openat+0x138/0x1c3 do_filp_open+0x55/0xb4 do_sys_openat2+0x6c/0xb6 Fixes: 34fa47612bfe ("afs: Fix race in async call refcounting") Reported-by: Bill MacAllister <bill@ca-zephyr.org> Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1052304 Suggested-by: Jeffrey E Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/2633992.1702073229@warthog.procyon.org.uk/ # v1 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20ksmbd: fix memory leak in smb2_lock()Zizhi Wo
[ Upstream commit 8f1752723019db900fb60a5b9d0dfd3a2bdea36c ] In smb2_lock(), if setup_async_work() executes successfully, work->cancel_argv will bind the argv that generated by kmalloc(). And release_async_work() is called in ksmbd_conn_try_dequeue_request() or smb2_lock() to release argv. However, when setup_async_work function fails, work->cancel_argv has not been bound to the argv, resulting in the previously allocated argv not being released. Call kfree() to fix it. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Signed-off-by: Zizhi Wo <wozizhi@huawei.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20ext4: fix warning in ext4_dio_write_end_io()Jan Kara
[ Upstream commit 619f75dae2cf117b1d07f27b046b9ffb071c4685 ] The syzbot has reported that it can hit the warning in ext4_dio_write_end_io() because i_size < i_disksize. Indeed the reproducer creates a race between DIO IO completion and truncate expanding the file and thus ext4_dio_write_end_io() sees an inconsistent inode state where i_disksize is already updated but i_size is not updated yet. Since we are careful when setting up DIO write and consider it extending (and thus performing the IO synchronously with i_rwsem held exclusively) whenever it goes past either of i_size or i_disksize, we can use the same test during IO completion without risking entering ext4_handle_inode_extension() without i_rwsem held. This way we make it obvious both i_size and i_disksize are large enough when we report DIO completion without relying on unreliable WARN_ON. Reported-by: <syzbot+47479b71cdfc78f56d30@syzkaller.appspotmail.com> Fixes: 91562895f803 ("ext4: properly sync file size update after O_SYNC direct IO") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20231130095653.22679-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20powerpc/ftrace: Fix stack teardown in ftrace_no_traceNaveen N Rao
[ Upstream commit 4b3338aaa74d7d4ec5b6734dc298f0db94ec83d2 ] Commit 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind") added use of a new stack frame on ftrace entry to fix stack unwind. However, the commit missed updating the offset used while tearing down the ftrace stack when ftrace is disabled. Fix the same. In addition, the commit missed saving the correct stack pointer in pt_regs. Update the same. Fixes: 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231130065947.2188860-1-naveen@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20r8152: add vendor/device ID pair for ASUS USB-C2500Kelly Kane
[ Upstream commit 7037d95a047cd89b1f680eed253c6ab586bef1ed ] The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by: Kelly Kane <kelly@hawknetworks.com> Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20r8152: add vendor/device ID pair for D-Link DUB-E250Antonio Napolitano
[ Upstream commit 72f93a3136ee18fd59fa6579f84c07e93424681e ] The D-Link DUB-E250 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by: Antonio Napolitano <anton@polit.no> Link: https://lore.kernel.org/r/CV200KJEEUPC.WPKAHXCQJ05I@mercurius Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 7037d95a047c ("r8152: add vendor/device ID pair for ASUS USB-C2500") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20r8152: add USB device driver for config selectionBjørn Mork
[ Upstream commit ec51fbd1b8a2bca2948dede99c14ec63dc57ff6b ] Subclassing the generic USB device driver to override the default configuration selection regardless of matching interface drivers. The r815x family devices expose a vendor specific function which the r8152 interface driver wants to handle. This is the preferred device mode. Additionally one or more USB class functions are usually supported for hosts lacking a vendor specific driver. The choice is USB configuration based, with one alternate function per configuration. Example device with both NCM and ECM alternate cfgs: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 3 P: Vendor=0bda ProdID=8156 Rev=31.00 S: Manufacturer=Realtek S: Product=USB 10/100/1G/2.5G LAN S: SerialNumber=001000001 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=256mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=r8152 E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=128ms C: #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms C: #Ifs= 2 Cfg#= 3 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms A problem with this is that Linux will prefer class functions over vendor specific functions. Using the above example, Linux defaults to cfg #2, running the device in a sub-optimal NCM mode. Previously we've attempted to work around the problem by blacklisting the devices in the ECM class driver "cdc_ether", and matching on the ECM class function in the vendor specific interface driver. The latter has been used to switch back to the vendor specific configuration when the driver is probed for a class function. This workaround has several issues; - class driver blacklists is additional maintanence cruft in an unrelated driver - class driver blacklists prevents users from optionally running the devices in class mode - each device needs double match entries in the vendor driver - the initial probing as a class function slows down device discovery Now these issues have become even worse with the introduction of firmware supporting both NCM and ECM, where NCM ends up as the default mode in Linux. To use the same workaround, we now have to blacklist the devices in to two different class drivers and add yet another match entry to the vendor specific driver. This patch implements an alternative workaround strategy - independent of the interface drivers. It avoids adding a blacklist to the cdc_ncm driver and will let us remove the existing blacklist from the cdc_ether driver. As an additional bonus, removing the blacklists allow users to select one of the other device modes if wanted. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20perf/x86/uncore: Don't WARN_ON_ONCE() for a broken discovery tableKan Liang
commit 5d515ee40cb57ea5331998f27df7946a69f14dc3 upstream. The kernel warning message is triggered, when SPR MCC is used. [ 17.945331] ------------[ cut here ]------------ [ 17.946305] WARNING: CPU: 65 PID: 1 at arch/x86/events/intel/uncore_discovery.c:184 intel_uncore_has_discovery_tables+0x4c0/0x65c [ 17.946305] Modules linked in: [ 17.946305] CPU: 65 PID: 1 Comm: swapper/0 Not tainted 5.4.17-2136.313.1-X10-2c+ #4 It's caused by the broken discovery table of UPI. The discovery tables are from hardware. Except for dropping the broken information, there is nothing Linux can do. Using WARN_ON_ONCE() is overkilled. Use the pr_info() to replace WARN_ON_ONCE(), and specify what uncore unit is dropped and the reason. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Petlan <mpetlan@redhat.com> Link: https://lore.kernel.org/r/20230112200105.733466-6-kan.liang@linux.intel.com Cc: Mahmoud Adam <mngyadam@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13Linux 6.1.68Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20231211182036.606660304@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: SeongJae Park <sj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13drm/i915: Skip some timing checks on BXT/GLK DSI transcodersVille Syrjälä
[ Upstream commit 20c2dbff342aec13bf93c2f6c951da198916a455 ] Apparently some BXT/GLK systems have DSI panels whose timings don't agree with the normal cpu transcoder hblank>=32 limitation. This is perhaps fine as there are no specific hblank/etc. limits listed for the BXT/GLK DSI transcoders. Move those checks out from the global intel_mode_valid() into into connector specific .mode_valid() hooks, skipping BXT/GLK DSI connectors. We'll leave the basic [hv]display/[hv]total checks in intel_mode_valid() as those seem like sensible upper limits regardless of the transcoder used. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720 Fixes: 8f4b1068e7fc ("drm/i915: Check some transcoder timing minimum limits") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit e0ef2daa8ca8ce4dbc2fd0959e383b753a87fd7d) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/i915/sdvo: stop caching has_hdmi_monitor in struct intel_sdvoJani Nikula
[ Upstream commit f2f9c8cb6421429ef166d6404426693212d0ca07 ] Use the information stored in display info. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3e9e1dcd554d470bdf474891a431b15e1880f9a0.1685437500.git.jani.nikula@intel.com Stable-dep-of: 20c2dbff342a ("drm/i915: Skip some timing checks on BXT/GLK DSI transcoders") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/i915/lvds: Use REG_BIT() & co.Ville Syrjälä
[ Upstream commit 9dd56e979cb69f5cd904574c852b620777a2f69f ] Use REG_BIT() & co. for the LVDS port register. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Stable-dep-of: 20c2dbff342a ("drm/i915: Skip some timing checks on BXT/GLK DSI transcoders") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/i915/display: Drop check for doublescan mode in modevalidAnkit Nautiyal
[ Upstream commit 9d04eb20bc71a383b4d4e383b0b7fac8d38a2e34 ] Since the DP/HDMI connector do not set connector->doublescan_allowed, the doublescan modes will get automatically filtered during drm_helper_probe_single_connector_modes(). Therefore check for double scan modes is not required and is dropped from modevalid functions for both DP and HDMI. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017143038.1748319-2-ankit.k.nautiyal@intel.com Stable-dep-of: 20c2dbff342a ("drm/i915: Skip some timing checks on BXT/GLK DSI transcoders") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13riscv: Kconfig: Add select ARM_AMBA to SOC_STARFIVEJia Jie Ho
commit 78a03b9f8e6b317f7c65738a3fc60e1e85106a64 upstream. Selects ARM_AMBA platform support for StarFive SoCs required by spi and crypto dma engine. Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> [ resolve conflict due to removal of "select SIFIVE_PLIC" ] Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13netfilter: nft_set_pipapo: skip inactive elements during set walkFlorian Westphal
commit 317eb9685095678f2c9f5a8189de698c5354316a upstream. Otherwise set elements can be deactivated twice which will cause a crash. Reported-by: Xingyuan Mo <hdthky0@gmail.com> Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13MIPS: Loongson64: Enable DMA noncoherent supportJiaxun Yang
commit edc0378eee00200a5bedf1bb9f00ad390e0d1bd4 upstream. There are some Loongson64 systems come with broken coherent DMA support, firmware will set a bit in boot_param and pass nocoherentio in cmdline. However nonconherent support was missed out when spin off Loongson-2EF form Loongson64, and that boot_param change never made itself into upstream. Support DMA noncoherent properly to get those systems working. Cc: stable@vger.kernel.org Fixes: 71e2f4dd5a65 ("MIPS: Fork loongson2ef from loongson64") Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13MIPS: Loongson64: Handle more memory types passed from firmwareJiaxun Yang
commit c7206e7bd214ebb3ca6fa474a4423662327d9beb upstream. There are many types of revsered memory passed from firmware that should be reserved in memblock, and UMA memory passed from firmware that should be added to system memory for system to use. Also for memblock there is no need to align those space into page, which actually cause problems. Handle them properly to prevent memory corruption on some systems. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13MIPS: Loongson64: Reserve vgabios memory on bootJiaxun Yang
commit 8f7aa77a463f47c9e00592d02747a9fcf2271543 upstream. vgabios is passed from firmware to kernel on Loongson64 systems. Sane firmware will keep this pointer in reserved memory space passed from the firmware but insane firmware keeps it in low memory before kernel entry that is not reserved. Previously kernel won't try to allocate memory from low memory before kernel entry on boot, but after converting to memblock it will do that. Fix by resversing those memory on early boot. Cc: stable@vger.kernel.org Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13KVM: SVM: Update EFER software model on CR0 trap for SEV-ESSean Christopherson
commit 4cdf351d3630a640ab6a05721ef055b9df62277f upstream. In general, activating long mode involves setting the EFER_LME bit in the EFER register and then enabling the X86_CR0_PG bit in the CR0 register. At this point, the EFER_LMA bit will be set automatically by hardware. In the case of SVM/SEV guests where writes to CR0 are intercepted, it's necessary for the host to set EFER_LMA on behalf of the guest since hardware does not see the actual CR0 write. In the case of SEV-ES guests where writes to CR0 are trapped instead of intercepted, the hardware *does* see/record the write to CR0 before exiting and passing the value on to the host, so as part of enabling SEV-ES support commit f1c6366e3043 ("KVM: SVM: Add required changes to support intercepts under SEV-ES") dropped special handling of the EFER_LMA bit with the understanding that it would be set automatically. However, since the guest never explicitly sets the EFER_LMA bit, the host never becomes aware that it has been set. This becomes problematic when userspace tries to get/set the EFER values via KVM_GET_SREGS/KVM_SET_SREGS, since the EFER contents tracked by the host will be missing the EFER_LMA bit, and when userspace attempts to pass the EFER value back via KVM_SET_SREGS it will fail a sanity check that asserts that EFER_LMA should always be set when X86_CR0_PG and EFER_LME are set. Fix this by always inferring the value of EFER_LMA based on X86_CR0_PG and EFER_LME, regardless of whether or not SEV-ES is enabled. Fixes: f1c6366e3043 ("KVM: SVM: Add required changes to support intercepts under SEV-ES") Reported-by: Peter Gonda <pgonda@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210507165947.2502412-2-seanjc@google.com> [A two year old patch that was revived after we noticed the failure in KVM_SET_SREGS and a similar patch was posted by Michael Roth. This is Sean's patch, but with Michael's more complete commit message. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13KVM: s390/mm: Properly reset no-datClaudio Imbrenda
commit 27072b8e18a73ffeffb1c140939023915a35134b upstream. When the CMMA state needs to be reset, the no-dat bit also needs to be reset. Failure to do so could cause issues in the guest, since the guest expects the bit to be cleared after a reset. Cc: <stable@vger.kernel.org> Reviewed-by: Nico Boehr <nrb@linux.ibm.com> Message-ID: <20231109123624.37314-1-imbrenda@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13MIPS: kernel: Clear FPU states when setting up kernel threadsThomas Bogendoerfer
commit a58a173444a68412bb08849bd81c679395f20ca0 upstream. io_uring sets up the io worker kernel thread via a syscall out of an user space prrocess. This process might have used FPU and since copy_thread() didn't clear FPU states for kernel threads a BUG() is triggered for using FPU inside kernel. Move code around to always clear FPU state for user and kernel threads. Cc: stable@vger.kernel.org Reported-by: Aurelien Jarno <aurel32@debian.org> Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1055021 Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13cifs: Fix flushing, invalidation and file size with FICLONEDavid Howells
commit c54fc3a4f375663f2361a9cbb2955fb4ef912879 upstream. Fix a number of issues in the cifs filesystem implementation of the FICLONE ioctl in cifs_remap_file_range(). This is analogous to the previously fixed bug in cifs_file_copychunk_range() and can share the helper functions. Firstly, the invalidation of the destination range is handled incorrectly: We shouldn't just invalidate the whole file as dirty data in the file may get lost and we can't just call truncate_inode_pages_range() to invalidate the destination range as that will erase parts of a partial folio at each end whilst invalidating and discarding all the folios in the middle. We need to force all the folios covering the range to be reloaded, but we mustn't lose dirty data in them that's not in the destination range. Further, we shouldn't simply round out the range to PAGE_SIZE at each end as cifs should move to support multipage folios. Secondly, there's an issue whereby a write may have extended the file locally, but not have been written back yet. This can leaves the local idea of the EOF at a later point than the server's EOF. If a clone request is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE (which gets translated to -EIO locally) if the clone source extends past the server's EOF. Fix this by: (0) Flush the source region (already done). The flush does nothing and the EOF isn't moved if the source region has no dirty data. (1) Move the EOF to the end of the source region if it isn't already at least at this point. If we can't do this, for instance if the server doesn't support it, just flush the entire source file. (2) Find the folio (if present) at each end of the range, flushing it and increasing the region-to-be-invalidated to cover those in their entirety. (3) Fully discard all the folios covering the range as we want them to be reloaded. (4) Then perform the extent duplication. Thirdly, set i_size after doing the duplicate_extents operation as this value may be used by various things internally. stat() hides the issue because setting ->time to 0 causes cifs_getatr() to revalidate the attributes. These were causing the cifs/001 xfstest to fail. Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer") Signed-off-by: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org cc: Christoph Hellwig <hch@lst.de> cc: Paulo Alcantara <pc@manguebit.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Matthew Wilcox <willy@infradead.org> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13cifs: Fix flushing, invalidation and file size with copy_file_range()David Howells
commit 7b2404a886f8b91250c31855d287e632123e1746 upstream. Fix a number of issues in the cifs filesystem implementation of the copy_file_range() syscall in cifs_file_copychunk_range(). Firstly, the invalidation of the destination range is handled incorrectly: We shouldn't just invalidate the whole file as dirty data in the file may get lost and we can't just call truncate_inode_pages_range() to invalidate the destination range as that will erase parts of a partial folio at each end whilst invalidating and discarding all the folios in the middle. We need to force all the folios covering the range to be reloaded, but we mustn't lose dirty data in them that's not in the destination range. Further, we shouldn't simply round out the range to PAGE_SIZE at each end as cifs should move to support multipage folios. Secondly, there's an issue whereby a write may have extended the file locally, but not have been written back yet. This can leaves the local idea of the EOF at a later point than the server's EOF. If a copy request is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE (which gets translated to -EIO locally) if the copy source extends past the server's EOF. Fix this by: (0) Flush the source region (already done). The flush does nothing and the EOF isn't moved if the source region has no dirty data. (1) Move the EOF to the end of the source region if it isn't already at least at this point. If we can't do this, for instance if the server doesn't support it, just flush the entire source file. (2) Find the folio (if present) at each end of the range, flushing it and increasing the region-to-be-invalidated to cover those in their entirety. (3) Fully discard all the folios covering the range as we want them to be reloaded. (4) Then perform the copy. Thirdly, set i_size after doing the copychunk_range operation as this value may be used by various things internally. stat() hides the issue because setting ->time to 0 causes cifs_getatr() to revalidate the attributes. These were causing the generic/075 xfstest to fail. Fixes: 620d8745b35d ("Introduce cifs_copy_file_range()") Cc: stable@vger.kernel.org Signed-off-by: David Howells <dhowells@redhat.com> cc: Paulo Alcantara <pc@manguebit.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Matthew Wilcox <willy@infradead.org> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13USB: gadget: core: adjust uevent timing on gadget unbindRoy Luo
commit 73ea73affe8622bdf292de898da869d441da6a9d upstream. The KOBJ_CHANGE uevent is sent before gadget unbind is actually executed, resulting in inaccurate uevent emitted at incorrect timing (the uevent would have USB_UDC_DRIVER variable set while it would soon be removed). Move the KOBJ_CHANGE uevent to the end of the unbind function so that uevent is sent only after the change has been made. Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class") Cc: stable@vger.kernel.org Signed-off-by: Roy Luo <royluo@google.com> Link: https://lore.kernel.org/r/20231128221756.2591158-1-royluo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13x86/CPU/AMD: Check vendor in the AMD microcode callbackBorislav Petkov (AMD)
commit 9b8493dc43044376716d789d07699f17d538a7c4 upstream. Commit in Fixes added an AMD-specific microcode callback. However, it didn't check the CPU vendor the kernel runs on explicitly. The only reason the Zenbleed check in it didn't run on other x86 vendors hardware was pure coincidental luck: if (!cpu_has_amd_erratum(c, amd_zenbleed)) return; gives true on other vendors because they don't have those families and models. However, with the removal of the cpu_has_amd_erratum() in 05f5f73936fa ("x86/CPU/AMD: Drop now unused CPU erratum checking function") that coincidental condition is gone, leading to the zenbleed check getting executed on other vendors too. Add the explicit vendor check for the whole callback as it should've been done in the first place. Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix") Cc: <stable@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20231201184226.16749-1-bp@alien8.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13devcoredump: Send uevent once devcd is readyMukesh Ojha
commit af54d778a03853801d681c98c0c2a6c316ef9ca7 upstream. dev_coredumpm() creates a devcoredump device and adds it to the core kernel framework which eventually end up sending uevent to the user space and later creates a symbolic link to the failed device. An application running in userspace may be interested in this symbolic link to get the name of the failed device. In a issue scenario, once uevent sent to the user space it start reading '/sys/class/devcoredump/devcdX/failing_device' to get the actual name of the device which might not been created and it is in its path of creation. To fix this, suppress sending uevent till the failing device symbolic link gets created and send uevent once symbolic link is created successfully. Fixes: 833c95456a70 ("device coredump: add new device coredump class") Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1700232572-25823-1-git-send-email-quic_mojha@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250_omap: Add earlycon support for the AM654 UART controllerRonald Wahl
commit 8e42c301ce64e0dcca547626eb486877d502d336 upstream. Currently there is no support for earlycon on the AM654 UART controller. This commit adds it. Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20231031131242.15516-1-rwahl@gmx.de Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250: 8250_omap: Do not start RX DMA on THRI interruptRonald Wahl
commit c6bb057418876cdfdd29a6f7b8cef54539ee8811 upstream. Starting RX DMA on THRI interrupt is too early because TX may not have finished yet. This change is inspired by commit 90b8596ac460 ("serial: 8250: Prevent starting up DMA Rx on THRI interrupt") and fixes DMA issues I had with an AM62 SoC that is using the 8250 OMAP variant. Cc: stable@vger.kernel.org Fixes: c26389f998a8 ("serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs") Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20231101171431.16495-1-rwahl@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bitRonald Wahl
commit 8973ab7a2441b286218f4a5c4c33680e2f139996 upstream. This fixes commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") which unfortunately set the UART_HAS_RHR_IT_DIS bit in the UART_OMAP_IER2 register and never cleared it. Cc: stable@vger.kernel.org Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20231031110909.11695-1-rwahl@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: sc16is7xx: address RX timeout interrupt errataDaniel Mack
commit 08ce9a1b72e38cf44c300a44ac5858533eb3c860 upstream. This device has a silicon bug that makes it report a timeout interrupt but no data in the FIFO. The datasheet states the following in the errata section 18.1.4: "If the host reads the receive FIFO at the same time as a time-out interrupt condition happens, the host might read 0xCC (time-out) in the Interrupt Indication Register (IIR), but bit 0 of the Line Status Register (LSR) is not set (means there is no data in the receive FIFO)." The errata description seems to indicate it concerns only polled mode of operation when reading bit 0 of the LSR register. However, tests have shown and NXP has confirmed that the RXLVL register also yields 0 when the bug is triggered, and hence the IRQ driven implementation in this driver is equally affected. This bug has hit us on production units and when it does, sc16is7xx_irq() would spin forever because sc16is7xx_port_irq() keeps seeing an interrupt in the IIR register that is not cleared because the driver does not call into sc16is7xx_handle_rx() unless the RXLVL register reports at least one byte in the FIFO. Fix this by always reading one byte from the FIFO when this condition is detected in order to clear the interrupt. This approach was confirmed to be correct by NXP through their support channels. Tested by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Daniel Mack <daniel@zonque.org> Co-Developed-by: Maxim Popov <maxim.snafu@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231123072818.1394539-1-daniel@zonque.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13ARM: PL011: Fix DMA supportArnd Bergmann
commit 58ac1b3799799069d53f5bf95c093f2fe8dd3cc5 upstream. Since there is no guarantee that the memory returned by dma_alloc_coherent() is associated with a 'struct page', using the architecture specific phys_to_page() is wrong, but using virt_to_page() would be as well. Stop using sg lists altogether and just use the *_single() functions instead. This also simplifies the code a bit since the scatterlists in this driver always have only one entry anyway. https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/ Use consistent names for dma buffers gc: Add a commit log from the initial thread: https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/ Use consistent names for dma buffers Fixes: cb06ff102e2d7 ("ARM: PL011: Add support for Rx DMA buffer polling.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20231122171503.235649-1-gregory.clement@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13usb: typec: class: fix typec_altmode_put_partner to put plugsRD Babiera
commit b17b7fe6dd5c6ff74b38b0758ca799cdbb79e26e upstream. When typec_altmode_put_partner is called by a plug altmode upon release, the port altmode the plug belongs to will not remove its reference to the plug. The check to see if the altmode being released evaluates against the released altmode's partner instead of the calling altmode itself, so change adev in typec_altmode_put_partner to properly refer to the altmode being released. typec_altmode_set_partner is not run for port altmodes, so also add a check in typec_altmode_release to prevent typec_altmode_put_partner() calls on port altmode release. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231129192349.1773623-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13smb: client: fix potential NULL deref in parse_dfs_referrals()Paulo Alcantara
commit 92414333eb375ed64f4ae92d34d579e826936480 upstream. If server returned no data for FSCTL_DFS_GET_REFERRALS, @dfs_rsp will remain NULL and then parse_dfs_referrals() will dereference it. Fix this by returning -EIO when no output data is returned. Besides, we can't fix it in SMB2_ioctl() as some FSCTLs are allowed to return no data as per MS-SMB2 2.2.32. Fixes: 9d49640a21bf ("CIFS: implement get_dfs_refer for SMB2+") Cc: stable@vger.kernel.org Reported-by: Robert Morris <rtm@csail.mit.edu> Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"Mathias Nyman
commit 24be0b3c40594a14b65141ced486ae327398faf8 upstream. This reverts commit 4baf1218150985ee3ab0a27220456a1f027ea0ac. Enabling runtime pm as default for all AMD xHC 1.1 controllers caused regression. An initial attempt to fix those was done in commit a5d6264b638e ("xhci: Enable RPM on controllers that support low-power states") but new issues are still seen. Revert this to get those AMD xHC 1.1 systems working This patch went to stable an needs to be reverted from there as well. Fixes: 4baf12181509 ("xhci: Loosen RPM as default policy to cover for AMD xHC 1.1") Link: https://lore.kernel.org/linux-usb/55c50bf5-bffb-454e-906e-4408c591cb63@molgen.mpg.de Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20231205090548.1377667-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13cifs: Fix non-availability of dedup breaking generic/304David Howells
commit 691a41d8da4b34fe72f09393505f55f28a8f34ec upstream. Deduplication isn't supported on cifs, but cifs doesn't reject it, instead treating it as extent duplication/cloning. This can cause generic/304 to go silly and run for hours on end. Fix cifs to indicate EOPNOTSUPP if REMAP_FILE_DEDUP is set in ->remap_file_range(). Note that it's unclear whether or not commit b073a08016a1 is meant to cause cifs to return an error if REMAP_FILE_DEDUP. Fixes: b073a08016a1 ("cifs: fix that return -EINVAL when do dedupe operation") Cc: stable@vger.kernel.org Suggested-by: Dave Chinner <david@fromorbit.com> cc: Xiaoli Feng <fengxiaoli0714@gmail.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: Darrick Wong <darrick.wong@oracle.com> cc: fstests@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/3876191.1701555260@warthog.procyon.org.uk/ Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13parport: Add support for Brainboxes IX/UC/PX parallel cardsCameron Williams
commit 1a031f6edc460e9562098bdedc3918da07c30a6e upstream. Adds support for Intashield IX-500/IX-550, UC-146/UC-157, PX-146/PX-157, PX-203 and PX-475 (LPT port) Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams <cang1@live.co.uk> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/AS4PR02MB790389C130410BD864C8DCC9C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250_dw: Add ACPI ID for Granite Rapids-D UARTAndy Shevchenko
commit e92fad024929c79460403acf946bc9c09ce5c3a9 upstream. Granite Rapids-D has an additional UART that is enumerated via ACPI. Add ACPI ID for it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20231205195524.2705965-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13usb: gadget: f_hid: fix report descriptor allocationKonstantin Aladyshev
commit 61890dc28f7d9e9aac8a9471302613824c22fae4 upstream. The commit 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev") has introduced a bug that leads to hid device corruption after the replug operation. Reverse device managed memory allocation for the report descriptor to fix the issue. Tested: This change was tested on the AMD EthanolX CRB server with the BMC based on the OpenBMC distribution. The BMC provides KVM functionality via the USB gadget device: - before: KVM page refresh results in a broken USB device, - after: KVM page refresh works without any issues. Fixes: 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev") Cc: stable@vger.kernel.org Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Link: https://lore.kernel.org/r/20231206080744.253-2-aladyshev22@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13drm/amdgpu: Update EEPROM I2C address for smu v13_0_0Candice Li
[ Upstream commit e0409021e34af50e7b6f31635c8d21583d7c43dd ] Check smu v13_0_0 SKU type to select EEPROM I2C address. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amdgpu: Add I2C EEPROM support on smu v13_0_6Candice Li
[ Upstream commit b81fde0dfe402e864ef1ac506eba756c89f1ad32 ] Support I2C EEPROM on smu v13_0_6. v2: Move IP_VERSION(13, 0, 6) ahead of IP_VERSION(13, 0, 10). Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0") Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 15:43:52 +0000