aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-10drm/radeon/kms: disable underscan by defaultAlex Deucher
Lots of HDMI TVs overscan the incoming image by default. The underscan option was added as a way to compensate for that by underscanning the image so that the edges would not be cut off on an overscanning TV. However, the TV provides no way of knowing whether it is overscanning or not. If the user has disabled overscan on their TV or has a TV that does not overscan, you will get black bars around the edges of your screen. Prior to the patch we got complaints and bug reports from users with overscanning TVs, now with the patch, we get lots of complaints and bug reports from users with non-overscanning TVs. There's no good default, but on average there have been more users complaining about it being on by default than off, so change it to off. This will probably result in a new deluge of overscanning TV user complaints. There's no winning. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-10drm/radeon/kms: only enable hdmi features if the monitor supports audioAlex Deucher
This avoids some issues in the current hdmi audio code for monitors without audio. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-10Merge branch 'drm-radeon-ni' of ../drm-radeon-next into drm-core-nextDave Airlie
* 'drm-radeon-ni' of ../drm-radeon-next: (30 commits) radeon: consolidate asic-specific function decls for pre-r600 drm/radeon/kms: add NI pci ids drm/radeon/kms: don't enable pcie gen2 on NI yet drm/radeon/kms: add radeon_asic struct for NI asics drm/radeon/kms/ni: load default sclk/mclk/vddc at pm init drm/radeon/kms: add ucode loader for NI drm/radeon/kms: add support for DCE5 display LUTs drm/radeon/kms: add ni_reg.h drm/radeon/kms: add bo blit support for NI drm/radeon/kms: always use writeback/events for fences on NI drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5 drm/radeon/kms: add backend map workaround for barts drm/radeon/kms: fill gpu init for NI asics drm/radeon/kms: add disabled vbios accessor for NI asics drm/radeon/kms: handle NI thermal controller drm/radeon/kms: parse DCE5 encoder caps when setting up encoders drm/radeon/kms: dvo dpms updates for DCE5 drm/radeon/kms: dac dpms updates for DCE5 drm/radeon/kms: DCE5 atom dig encoder updates drm/radeon/kms: DCE5 atom transmitter control updates ...
2011-01-10drm: Restore the old_fb upon modeset failureChris Wilson
... or else we may end up disabling the wrong framebuffer, leading to an OOPS, e.g: [ 6033.229012] kernel BUG at drivers/gpu/drm/i915/i915_gem.c:3271! [ 6033.229012] invalid opcode: 0000 [#1] SMP [ 6033.229012] last sysfs file: /sys/devices/virtual/backlight/acpi_video0/uevent [ 6033.229012] Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq mperf snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer thinkpad_acpi ppdev snd r852 sm_common iTCO_wdt uvcvideo i2c_i801 iTCO_vendor_support microcode wmi nand videodev nand_ids nand_ecc snd_page_alloc parport_pc parport mtd soundcore joydev v4l1_compat pcspkr uinput ipv6 sdhci_pci sdhci mmc_core yenta_socket i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan] [ 6033.229012] [ 6033.229012] Pid: 4834, comm: Xorg Not tainted 2.6.37-rc8+ #25 7661BL5/7661BL5 [ 6033.229012] EIP: 0060:[<f86fda5e>] EFLAGS: 00013246 CPU: 0 [ 6033.229012] EIP is at i915_gem_object_unpin+0x23/0x76 [i915] [ 6033.229012] EAX: f68a4000 EBX: f6831f00 ECX: 000600fa EDX: f68a8000 [ 6033.229012] ESI: f68a4014 EDI: f68a42b8 EBP: f2169c44 ESP: f2169c3c [ 6033.229012] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 6033.229012] Process Xorg (pid: 4834, ti=f2168000 task=f21c8000 task.ti=f2168000) [ 6033.229012] Stack: [ 6033.229012] f3a84800 f68a4014 f2169c54 f87045d8 f3a84800 f872d9a8 f2169c68 f7fd8091 [ 6033.229012] f3b952a4 00000000 f68a414c f2169cf0 f7fd9377 00000000 00000000 f7fd98b0 [ 6033.229012] f7fd9f4e 0000000f f7f328a0 00000000 00000000 00000000 f2169ca4 f68a414c [ 6033.229012] Call Trace: [ 6033.229012] [<f87045d8>] ? intel_crtc_disable+0x36/0x41 [i915] [ 6033.229012] [<f7fd8091>] ? drm_helper_disable_unused_functions+0xcd/0xf9 [drm_kms_helper] [ 6033.229012] [<f7fd9377>] ? drm_crtc_helper_set_config+0x62a/0x7f7 [drm_kms_helper] [ 6033.229012] [<c04daa10>] ? __slab_free+0x1b/0xa4 [ 6033.229012] [<f7fd7e62>] ? drm_fb_helper_initial_config+0x466/0x497 [drm_kms_helper] [ 6033.229012] [<f7fd7ea3>] ? drm_fb_helper_restore+0x10/0x2a [drm_kms_helper] [ 6033.229012] [<f86f2577>] ? i915_driver_lastclose+0x2a/0x57 [i915] [ 6033.229012] [<f7f1989f>] ? drm_lastclose+0x45/0x23e [drm] [ 6033.229012] [<f7f1a0b4>] ? drm_release+0x462/0x4d7 [drm] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-10Merge remote branch 'nouveau/drm-nouveau-next' of ../drm-nouveau-next into ↵Dave Airlie
drm-core-next * 'nouveau/drm-nouveau-next' of ../drm-nouveau-next: drm/nouveau: fix hwmon device binding drm/nouveau: create grctx on the fly on all chipsets drm/nvc0: fix init without firmware present drm/nvc0/pgraph: fix 0x406028/0x405870 init drm/nvc0/pgraph: more unit names drm/nvc0/pfifo: support for chipsets with only one PSUBFIFO (0xc1) drm/nvc0: reserve only subc 0 for kernel use drm/nv50: sync up gr data error names with rnn, use for nvc0 also drm/nvc0: parse a couple more PGRAPH_INTR drm/nvc0: nuke left-over debug messages drm/nvc0: kill off a couple more magics drm/nouveau: Validate channel indices passed from userspace. drm/nouveau: Only select ACPI_VIDEO if its dependencies are met
2011-01-07drm/nouveau: fix hwmon device bindingLucas Stach
Bind the hwmon structs to nouveau device kobj. This makes sure the hwmon files are created in the device subdir in line with all other hwmon drivers. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-07radeon: consolidate asic-specific function decls for pre-r600Daniel Vetter
Move them to radeon_asic.h together with the other asic specific stuff. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07vga_switcheroo: comparing too few characters in strncmp()Dan Carpenter
This is a copy-and-paste bug. We should be comparing 4 characters here instead of 3. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add NI pci idsAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: don't enable pcie gen2 on NI yetAlex Deucher
Still needs to be implemented. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add radeon_asic struct for NI asicsAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms/ni: load default sclk/mclk/vddc at pm initAlex Deucher
The vbios only partially initializes the memory controller on NI, so now we need to load the MC ucode in the driver and set the default clocks once the ucode is loaded. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add ucode loader for NIAlex Deucher
The MC ucode is no longer loaded by the vbios tables as on previous asics. It now must be loaded by the driver. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add support for DCE5 display LUTsAlex Deucher
The hardware supports advanced user defined color management but at the moment, there is no infrastructure in place to take advantage of it so for now we just support the legacy LUTs. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add ni_reg.hAlex Deucher
This adds some new NI (northern islands) specific display register defines. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add bo blit support for NIAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: always use writeback/events for fences on NIAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5Alex Deucher
NI chips no longer load the MC ucode in the asic_init sequence so the asic comes up in a basic mode with low engine/memory clocks and a voltage. Once the MC ucode is loaded by the driver the card can be programmed to it's proper default clocks and voltage. As such the default clocks in the firmware info table as the post clocks, not the default running clocks. Track the default post clocks and default running clocks separately to handle this. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add backend map workaround for bartsAlex Deucher
Same as Cypress. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: fill gpu init for NI asicsAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add disabled vbios accessor for NI asicsAlex Deucher
Some systems disable the vbios on secondary cards or cards that have been posted. This code re-enabled the vbios so the driver can load it. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: handle NI thermal controllerAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: parse DCE5 encoder caps when setting up encodersAlex Deucher
Needed to tell which DIG encoders are HBR2 capable for DP 1.2. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: dvo dpms updates for DCE5Alex Deucher
The DVOOutputControl table was removed for DCE5. DVOEncoderControl now handles everything. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: dac dpms updates for DCE5Alex Deucher
The DAC1OutputControl table was removed for DCE5. DAC1EncoderControl now handles everything. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom dig encoder updatesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom transmitter control updatesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom spread spectrum updatesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom SetPixelClock updatesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 supports 16k display surfacesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: update display watermark calculations for DCE5Alex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add NI chip familiesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: clean up ASIC_IS_DCE41() macroAlex Deucher
only fusion asics are dce4.1 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: fix some typos in evergreen pm4 definesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: set the MSB of the HDP slice sizeAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add support for gen2 pcie link speedsAlex Deucher
Supported on rv6xx/r7xx/evergreen. Cards come up in gen1 mode. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add pcie get/set lane support for r6xx/r7xx/evergreenAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/nouveau: create grctx on the fly on all chipsetsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-07drm: Update fbdev fb_fix_screeninfoJames Simmons
If you change the color depth via fbset or some other framebuffer aware userland application struct fb_fix_screeninfo is not updated to this new information. This patch fixes this issue. Also the function is changed to just pass in struct drm_framebuffer so in the future we could use more fields. I'm hoping some day fix->smem* could be set here :-) Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06drm/nvc0: fix init without firmware presentBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-06drm/radeon/kms: add quirk for Mac Radeon HD 2600 cardAlex Deucher
Reported-by: 屋国遥 <hyagni@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06drm/radeon: use system_wq instead of dev_priv->wqTejun Heo
With cmwq, there's no reason for radeon to use a dedicated workqueue. Drop dev_priv->wq and use system_wq instead. Because radeon_driver_irq_uninstall_kms() may be called from unsleepable context, the work items can't be flushed from there. Instead, init and flush from radeon_irq_kms_init/fini(). While at it, simplify canceling/flushing of rdev->pm.dynpm_idle_work. Always initialize and sync cancel instead of being unnecessarily smart about it. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Alex Deucher <alexdeucher@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06vga_switcheroo: fix build with non switcheroo enabled path.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06drm/radeon/kms: manage r300 CMASK RAM access and allow CMASK clearMarek Olšák
The CMASK RAM is for colorbuffer compression (used in conjunction with MSAA). Only one user (filp) can access it. The CMASK RAM access is managed in the same way as Hyper-Z, but there is a separate ioctl, because an app that uses MSAA does not necessarily have to use zbuffering. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06drm/radeon/kms: adjust quirk for acer laptopAlex Deucher
Acer laptop (TravelMate 5730G) has an HDMI connector on the laptop and a DVI connector on the docking station and both share the same encoder, hpd pin, and ddc line. The bios connector table reflects this and is technically correct, however, we drop the DVI connector here since xrandr has no concept of encoders (only crtcs and connectors) and will try and drive both connectors with different crtcs which isn't possible on the hardware side and leaves no crtcs for LVDS or VGA. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=32732 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05vga_switcheroo: split switching into two stages.Dave Airlie
stage 1: turn card on, switch boot vga pointer. stage 2: switch fbs, switch mux and power off old card. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05drm/switcheroo: track state of switch in drivers.Dave Airlie
We need to track the state of the switch in drivers, so that after s/r we don't resume the card we've explicitly switched off before. Also don't allow a userspace open to occur if we've switched the gpu off. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05vga_switcheroo: add reprobe hook for fbcon to recheck connected outputs.Dave Airlie
This adds a hook after the mux is switched for the driver to reprobe the connected outputs. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05nouveau/acpi: improve detection of what is IGD and what is DIS.Dave Airlie
This improves the IGD/DIS picking using firstly if Intel, then if the bus is bus 0. There may be a correct way to do this, but I've no idea what it is. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05drm/nouveau: add delayed switch complete callback.Dave Airlie
this just adds the callback on the delayed switch mechanism. Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 15:22:32 +0000