aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-06driver core: remove the driver-model structures from the documentationWanlong Gao
Remove the struct bus_type, class, device, device_driver from the driver-model docs. With another patch add them to device.h, since they are out of date. That will keep things up to date and provide a better way to document this stuff. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Acked-by: Harry Wei <harryxiyou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06driver core: Add the device driver-model structures to kerneldocWanlong Gao
Add the comments to the structure bus_type, device_driver, device, class to device.h for generating the driver-model kerneldoc. With another patch these all removed from the files in Documentation/driver-model/ since they are out of date. That will keep things up to date and provide a better way to document this stuff. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Acked-by: Harry Wei <harryxiyou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06Translated Documentation/email-clients.txtHarry Wei
The patch includes the translation Documentation/email-clients.txt. If anyone has other problems, please let me know. Signed-off-by: Harry Wei <harryxiyou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06RAW driver: Remove call to kobject_put().Robert P. J. Day
If cdev_add() fails, there is no justification for subsequently calling kobject_put(). Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06reboot: disable usermodehelper to prevent fs accessKay Sievers
In case CONFIG_UEVENT_HELPER_PATH is not set to "", which it should be on every system, the kernel forks processes during shutdown, which try to access the rootfs, even when the binary does not exist. It causes exceptions and long delays in the disk driver, which gets read requests at the time it tries to shut down the disk. This patch disables all kernel-forked processes during reboot to allow a clean poweroff. Cc: Tejun Heo <htejun@gmail.com> Tested-By: Anton Guda <atu@dmeti.dp.ua> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06efivars: prevent oops on unload when efi is not enabledRandy Dunlap
efivars_exit() should check for efi_enabled and not undo allocations when efi is not enabled. Otherwise there is an Oops during module unload: calling efivars_init+0x0/0x1000 [efivars] @ 2810 EFI Variables Facility v0.08 2004-May-17 initcall efivars_init+0x0/0x1000 [efivars] returned 0 after 5120 usecs Oops: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/module/firmware_class/initstate CPU 1 Modules linked in: efivars(-) af_packet tun nfsd lockd nfs_acl auth_rpcgss sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep mousedev snd_seq joydev snd_seq_device mac_hid evdev snd_pcm usbkbd usbmouse usbhid snd_timer hid tg3 snd sr_mod pcspkr rtc_cmos soundcore cdrom iTCO_wdt processor sg dcdbas i2c_i801 rtc_core iTCO_vendor_support intel_agp snd_page_alloc thermal_sys rtc_lib intel_gtt 8250_pnp button hwmon unix ide_pci_generic ide_core ata_generic pata_acpi ata_piix sd_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ssb mmc_core pcmcia pcmcia_core firmware_class ehci_hcd usbcore [last unloaded: dell_rbu] Pid: 2812, comm: rmmod Not tainted 2.6.39-rc6 #1 Dell Inc. OptiPlex 745 /0TY565 RIP: 0010:[<ffffffffa06a17f6>] [<ffffffffa06a17f6>] unregister_efivars+0x28/0x12c [efivars] RSP: 0018:ffff88005eedde98 EFLAGS: 00010283 RAX: ffffffffa06a23fc RBX: ffffffffa06a44c0 RCX: ffff88007c227a50 RDX: 0000000000000000 RSI: 00000055ac13db78 RDI: ffffffffa06a44c0 RBP: ffff88005eeddec8 R08: 0000000000000000 R09: ffff88005eeddd78 R10: ffffffffa06a4220 R11: ffff88005eeddd78 R12: fffffffffffff7d0 R13: 00007fff5a3aaec0 R14: 0000000000000000 R15: ffffffffa06a4508 FS: 00007fa8dcc4a6f0(0000) GS:ffff88007c200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000005d148000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 2812, threadinfo ffff88005eedc000, task ffff88006754b000) Stack: ffff88005eeddec8 ffffffffa06a4220 0000000000000000 00007fff5a3aaec0 0000000000000000 0000000000000001 ffff88005eedded8 ffffffffa06a2418 ffff88005eeddf78 ffffffff810d3598 ffffffffa06a4220 0000000000000880 Call Trace: [<ffffffffa06a2418>] efivars_exit+0x1c/0xc04 [efivars] [<ffffffff810d3598>] sys_delete_module+0x2d6/0x368 [<ffffffff812d1db9>] ? lockdep_sys_exit_thunk+0x35/0x67 [<ffffffff810fcba1>] ? audit_syscall_entry+0x172/0x1a5 [<ffffffff81575082>] system_call_fastpath+0x16/0x1b Code: 5c c9 c3 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 0f 1f 44 00 00 4c 8b 67 48 48 89 fb 4c 8d 7f 48 49 81 ec 30 08 00 00 <4d> 8b ac 24 30 08 00 00 49 81 ed 30 08 00 00 eb 59 48 89 df 48 RIP [<ffffffffa06a17f6>] unregister_efivars+0x28/0x12c [efivars] RSP <ffff88005eedde98> CR2: 0000000000000000 ---[ end trace aa99b99090f70baa ]--- Matt apparently removed such a check in 2004 (with no reason given): * 17 May 2004 - Matt Domsch <Matt_Domsch@dell.com> * remove check for efi_enabled in exit but there have been several changes since then. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mike Waychison <mikew@google.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: <matthew.e.tolentino@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06Allow setting of number of raw devices as a module parameterJan Kara
Allow setting of maximal number of raw devices as a module parameter. This requires changing of static array into a vmalloced one (the array is going to be too large for kmalloc). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29Introduce CONFIG_GOOGLE_FIRMWAREMike Waychison
In order to keep Google's firmware drivers organized amongst themselves, all Google firmware drivers are gated on CONFIG_GOOGLE_FIRMWARE=y, which defaults to 'n' in the kernel build. Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29driver: Google Memory ConsoleMike Waychison
This patch introduces the 'memconsole' driver. Our firmware gives us access to an in-memory log of the firmware's output. This gives us visibility in a data-center of headless machines as to what the firmware is doing. The memory console is found by the driver by finding a header block in the EBDA. The buffer is then copied out, and is exported to userland in the file /sys/firmware/log. Signed-off-by: San Mehat <san@google.com> Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29driver: Google EFI SMIMike Waychison
The "gsmi" driver bridges userland with firmware specific routines for accessing hardware. Currently, this driver only supports NVRAM and eventlog information. Deprecated functions have been removed from the driver, though their op-codes are left in place so that they are not re-used. This driver works by trampolining into the firmware via the smi_command outlined in the FADT table. Three protocols are used due to various limitations over time, but all are included herein. This driver should only ever load on Google boards, identified by either a "Google, Inc." board vendor string in DMI, or "GOOGLE" in the OEM strings of the FADT ACPI table. This logic happens in gsmi_system_valid(). Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Aaron Durbin <adurbin@google.com> Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29x86: Better comments for get_bios_ebda()Mike Waychison
Make the comments a bit clearer for get_bios_ebda so that it actually tells us what it is returning. Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29x86: get_bios_ebda_length()Mike Waychison
Add a wrapper routine that tells us the length of the EBDA if it is present. This guy also ensures that the returned length doesn't let the EBDA run past the 640KiB mark. Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29misc: fix ti-st build issuesRandy Dunlap
st_drv uses skb*() interfaces, so it should depend on NET. It also uses GPIO interfaces, so it should depend on GPIOLIB. st_kim.c uses syss_*() calls, so it should #include <linux/sysfs.h>. Fixes these observed build errors: ERROR: "skb_queue_purge" [drivers/misc/ti-st/st_drv.ko] undefined! ERROR: "skb_pull" [drivers/misc/ti-st/st_drv.ko] undefined! ERROR: "skb_queue_tail" [drivers/misc/ti-st/st_drv.ko] undefined! ERROR: "__alloc_skb" [drivers/misc/ti-st/st_drv.ko] undefined! ERROR: "kfree_skb" [drivers/misc/ti-st/st_drv.ko] undefined! ERROR: "skb_dequeue" [drivers/misc/ti-st/st_drv.ko] undefined! ERROR: "skb_put" [drivers/misc/ti-st/st_drv.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-25params.c: Use new strtobool function to process boolean inputsJonathan Cameron
No functional changes. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-25debugfs: move to new strtoboolJonathan Cameron
No functional changes requires that we eat errors from strtobool. If people want to not do this, then it should be fixed at a later date. V2: Simplification suggested by Rusty Russell removes the need for additional variable ret. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-25Add a strtobool function matching semantics of existing in kernel equivalentsJonathan Cameron
This is a rename of the usr_strtobool proposal, which was a renamed, relocated and fixed version of previous kstrtobool RFC Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-25drivers:base:fix the coding format of memory.cWanlong Gao
Fix the line longer than 80 of memory_uevent function . Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22driver core: let dev_set_drvdata return int instead of void as it can failUwe Kleine-König
Before commit b402843 (Driver core: move dev_get/set_drvdata to drivers/base/dd.c) calling dev_set_drvdata with dev=NULL was an unchecked error. After some discussion about what to return in this case removing the check (and so producing a null pointer exception) seems fine. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22driver core/platform_device_add_resources: free resource before overwritingUwe Kleine-König
Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22driver core/platform_device_add_resources: set resource to NULL if !resUwe Kleine-König
This makes the res = NULL case more consistant to the res != NULL case as now both overwrite pdev->resource. Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22driver core/platform_device_add_data: free platform data before overwritingUwe Kleine-König
Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22driver core/platform_device_add_data: set platform_data to NULL if !dataUwe Kleine-König
This makes the data = NULL case more consistent to the data != NULL case. The functional change is that now platform_device_add_data(somepdev, NULL, somesize) sets pdev->dev.platform_data to NULL instead of not touching it. Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22drivers/base/core.c: Fixed brace coding style issue.Karthigan Srinivasan
Fixed brace coding style issue. Signed-off-by: Karthigan Srinivasan <karthigan.srinivasan@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22driver-core: fix race between device_register and driver_registerSebastian Ott
When a device is registered to a bus it will be a) added to the list of devices of the bus and b) bind to a driver (if one matches). As a result of a driver being registered at this bus between a) and b) this device could already be bound to a driver. This leads to a warning and incorrect refcounting. To fix this add a check to device_attach to identify an already bound device. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22drivers:misc:ti-st: remove rfkill dependencyPavan Savoy
rfkill is no longer used by Texas Instruments shared transport driver to communicate with user-space. This patch removes the dependency of rfkill to be enabled to build shared transport driver in the Kconfig. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22drivers:misc:ti-st: handle delayed tty receivePavan Savoy
When certain technologies shutdown their interface without waiting for the acknowledgement from the chip. The receive_buf from the TTY would be invoked a while after the relevant technology is unregistered. This patch introduces a new flag "is_registered" which maintains the state of protocols BT, FM or GPS and thereby removes the need to clear the protocol data from ST when protocols gets unregistered. This fixes corner cases when HCI RESET is sent down from bluetooth stack and the receive_buf is called from tty after 250ms before which bluetooth would have unregistered from the system. OR - when FM application decides to close down the device without sending a power-off FM command resulting in some RDS data or interrupt data coming in after the driver is unregistered. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19kmsg: properly support writev to avoid interleaved printk lines fixAndrew Morton
make `len' size_t, avoid multiple-assignments. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19printk: /dev/kmsg - properly support writev() to avoid interleaved printk() ↵Kay Sievers
lines printk: /dev/kmsg - properly support writev() to avoid interleaved printk lines We should avoid calling printk() in a loop, when we pass a single string to /dev/kmsg with writev(). Cc: Lennart Poettering <lennart@poettering.net> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19uio: clean uioinfo when uninstall uio driverJie Zhou
The uioinfo should be cleaned up when uninstall, otherwise re-install failure of uio_pdrv_genirq.ko will happen. Signed-off-by: Jie Zhou <b30303@freescale.com> Signed-off-by: Aisheng Dong <b29396@freescale.com> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19uio: fix allocating minor id for uio deviceHillf Danton
The number of uio devices that could be used should be less than UIO_MAX_DEVICES by design, and this work guards any cases in which id more than UIO_MAX_DEVICES is utilized. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19uio: fix finding mm index for vmaHillf Danton
When finding mm index for vma it looks more flexible that the mm could be sparse, and both the size of mm and the pgoff of vma could give correct selection. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19uio_netx: Add support for netPLC cardsDaniel Trautmann
This patch adds support for Hilscher / IBHsoftec netPLC cards to uio_netx userspace IO driver. Changes from v1 -> v2: Fixed whitespace errors reported by scripts/checkpatch.pl which were caused by email client. Signed-off-by: Daniel Trautmann <dtrautmann@ibhsoftec-sps.de> Signed-off-by: "Hans J. Koch" <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19HOWTO: sync up Documentaion/ja_JP/HOWTOTsugikazu Shibata
Signed-off-by: Tsugikazu Shibata <tshibata@ab.jp.nec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19kernel/ksysfs.c: expose file_caps_enabled in sysfsLudwig Nussel
A kernel booted with no_file_caps allows to install fscaps on a binary but doesn't actually honor the fscaps when running the binary. Userspace currently has no sane way to determine whether installing fscaps actually has any effect. Since parsing /proc/cmdline is fragile this patch exposes the current setting (1 or 0) via /sys/kernel/fscaps Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19drivers: make device_type constStephen Hemminger
The device_type structure does not contain data that changes during usage and should be const. This allows devices to declare the struct const. I have patches to change all the subsystems, but need the infra structure change first. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19firmware: Fix grammar in sysfs-firmware-dmi docMike Waychison
Fix the grammar in describing the position attribute of DMI entries in the dmi-sysfs module. While here, make a couple other small clarifying fixups to the docs. Reported-by: <Valdis.Kletnieks@vt.edu> Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19efivars: handle errors from register_efivars()Dan Carpenter
We should unwind and return an error if register_efivars() fails. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19efivars: memory leak on error in create_efivars_bin_attributes()Dan Carpenter
This is a cut and paste bug. We intended to free ->del_var and ->new_var but we only free ->new_var. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19device: add dev_WARN_ONCEFelipe Balbi
it's quite useful to print the device name on the stack dump caused by WARN(), but there are other cases where we might want to use WARN_ONCE. Introduce a helper similar to dev_WARN() for that case too. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-18Linux 2.6.39-rc4Linus Torvalds
2011-04-18Merge branch 'for-39-rc4' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds
* 'for-39-rc4' of git://codeaurora.org/quic/kernel/davidb/linux-msm: msm: timer: fix missing return value msm: Remove extraneous ffa device check
2011-04-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xen-kbdfront - fix mouse getting stuck after save/restore Input: estimate number of events per packet Input: evdev - indicate buffer overrun with SYN_DROPPED Input: document event types and codes and their intended use Input: add KEY_IMAGES specifically for AL Image Browser Input: twl4030_keypad - fix potential NULL dereference in twl4030_kp_probe() Input: h3600_ts - fix error handling at connect Input: twl4030_keypad - avoid potential NULL-pointer dereference
2011-04-18Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: add blk_run_queue_async block: blk_delay_queue() should use kblockd workqueue md: fix up raid1/raid10 unplugging. md: incorporate new plugging into raid5. md: provide generic support for handling unplug callbacks. md - remove old plugging code. md/dm - remove remains of plug_fn callback. md: use new plugging interface for RAID IO. block: drop queue lock before calling __blk_run_queue() for kblockd punt Revert "block: add callback function for unplug notification" block: Enhance new plugging support to support general callbacks
2011-04-18Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/powermac: Build fix with SMP and CPU hotplug powerpc/perf_event: Skip updating kernel counters if register value shrinks powerpc: Don't write protect kernel text with CONFIG_DYNAMIC_FTRACE enabled powerpc: Fix oops if scan_dispatch_log is called too early powerpc/pseries: Use a kmem cache for DTL buffers powerpc/kexec: Fix regression causing compile failure on UP powerpc/85xx: disable Suspend support if SMP enabled powerpc/e500mc: Remove CPU_FTR_MAYBE_CAN_NAP/CPU_FTR_MAYBE_CAN_DOZE powerpc/book3e: Fix CPU feature handling on 64-bit e5500 powerpc: Check device status before adding serial device powerpc/85xx: Don't add disabled PCIe devices
2011-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (24 commits) Btrfs: fix free space cache leak Btrfs: avoid taking the chunk_mutex in do_chunk_alloc Btrfs end_bio_extent_readpage should look for locked bits Btrfs: don't force chunk allocation in find_free_extent Btrfs: Check validity before setting an acl Btrfs: Fix incorrect inode nlink in btrfs_link() Btrfs: Check if btrfs_next_leaf() returns error in btrfs_real_readdir() Btrfs: Check if btrfs_next_leaf() returns error in btrfs_listxattr() Btrfs: make uncache_state unconditional btrfs: using cached extent_state in set/unlock combinations Btrfs: avoid taking the trans_mutex in btrfs_end_transaction Btrfs: fix subvolume mount by name problem when default mount subvolume is set fix user annotation in ioctl.c Btrfs: check for duplicate iov_base's when doing dio reads btrfs: properly handle overlapping areas in memmove_extent_buffer Btrfs: fix memory leaks in btrfs_new_inode() Btrfs: check for duplicate iov_base's when doing dio reads Btrfs: reuse the extent_map we found when calling btrfs_get_extent Btrfs: do not use async submit for small DIO io's Btrfs: don't split dio bios if we don't have to ...
2011-04-18proc: do proper range check on readdir offsetLinus Torvalds
Rather than pass in some random truncated offset to the pid-related functions, check that the offset is in range up-front. This is just cleanup, the previous commit fixed the real problem. Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-18next_pidmap: fix overflow conditionLinus Torvalds
next_pidmap() just quietly accepted whatever 'last' pid that was passed in, which is not all that safe when one of the users is /proc. Admittedly the proc code should do some sanity checking on the range (and that will be the next commit), but that doesn't mean that the helper functions should just do that pidmap pointer arithmetic without checking the range of its arguments. So clamp 'last' to PID_MAX_LIMIT. The fact that we then do "last+1" doesn't really matter, the for-loop does check against the end of the pidmap array properly (it's only the actual pointer arithmetic overflow case we need to worry about, and going one bit beyond isn't going to overflow). [ Use PID_MAX_LIMIT rather than pid_max as per Eric Biederman ] Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com> Analyzed-by: Robert Święcki <robert@swiecki.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-18Input: xen-kbdfront - fix mouse getting stuck after save/restoreIgor Mammedov
Mouse gets "stuck" after restore of PV guest but buttons are in working condition. If driver has been configured for ABS coordinates at start it will get XENKBD_TYPE_POS events and then suddenly after restore it'll start getting XENKBD_TYPE_MOTION events, that will be dropped later and they won't get into user-space. Regression was introduced by hunk 5 and 6 of 5ea5254aa0ad269cfbd2875c973ef25ab5b5e9db ("Input: xen-kbdfront - advertise either absolute or relative coordinates"). Driver on restore should ask xen for request-abs-pointer again if it is available. So restore parts that did it before 5ea5254. Acked-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Igor Mammedov <imammedo@redhat.com> [v1: Expanded the commit description] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-18Input: estimate number of events per packetJeff Brown
Calculate a default based on the number of ABS axes, REL axes, and MT slots for the device during input device registration. Signed-off-by: Jeff Brown <jeffbrown@android.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-18Btrfs: fix free space cache leakChris Mason
The free space caching code was recently reworked to cache all the pages it needed instead of using find_get_page everywhere. One loop was missed though, so it ended up leaking pages. This fixes it to use our page array instead of find_get_page. Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-05 00:42:04 +0000