aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-18mfd: tmio_mmc hardware abstraction for CNF areaIan Molton
This patch abstracts out the CNF area code from tmio_mmc which is not present in all hardware that can use this driver. This is required so that we can support non-toshiba based hardware. ASIC3 support by Philipp Zabel Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18mfd: WM8350 off by one bugDan Carpenter
If irq == WM8350_NUM_IRQ that would put us past the end of the array. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18mfd: Correct WM835x ISINK ramp time definesMark Brown
The constants used to specify ISINK ramp times for WM835x had the wrong shifts so that the on times applied to the off ramp and vice versa. The masks for the bitfields are correct. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: do_add_mount() should sanitize mnt_flags CIFS shouldn't make mountpoints shrinkable mnt_flags fixes in do_remount() attach_recursive_mnt() needs to hold vfsmount_lock over set_mnt_shared() may_umount() needs namespace_sem Fix configfs leak Fix the -ESTALE handling in do_filp_open() ecryptfs: Fix refcnt leak on ecryptfs_follow_link() error path Fix ACC_MODE() for real Unrot uml mconsole a bit hppfs: handle ->put_link() Kill 9p readlink() fix autofs/afs/etc. magic mountpoint breakage
2010-01-17modpost: fix segfault in sym_is() with prefixed archesMike Frysinger
The sym_is() compares a symbol in an attempt to automatically skip symbol prefixes. It does this first by searching the real symbol with the normal unprefixed symbol. But then it uses the length of the original symbol to check the end of the substring instead of the length of the symbol it is looking for. On non-prefixed arches, this is effectively the same thing, so there is no problem. On prefixed-arches, since this is exceeds by just one byte, a crash is rare and it is usually a NUL byte anyways. But every once in a blue moon, you get the right page alignment and it segfaults. For example, on the Blackfin arch, sym_is() will be called with the real symbol "___mod_usb_device_table" as "symbol" when looking for the normal symbol "__mod_usb_device_table" as "name". The substring will thus return one byte into "symbol" and store it into "match". But then "match" will be indexed with the length of "symbol" instead of "name" and so we will exceed the storage. i.e. the code ends up doing: char foo[] = "abc"; return foo[strlen(foo)+1] == '\0'; Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16page allocator: update NR_FREE_PAGES only when necessaryKOSAKI Motohiro
commit f2260e6b (page allocator: update NR_FREE_PAGES only as necessary) made one minor regression. if __rmqueue() was failed, NR_FREE_PAGES stat go wrong. this patch fixes it. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: Huang Shijie <shijie8@gmail.com> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Do not use device name after device_unregister i2c/pca: Don't use *_interruptible i2c-ali1563: Remove sparse warnings i2c: Test off by one in {piix4,vt596}_transaction() i2c-core: Storage class should be before const qualifier
2010-01-16Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, uv: Ensure hub revision set for all ACPI modes. x86, uv: Add function retrieving node controller revision number x86: xen: 64-bit kernel RPL should be 0 x86: kernel_thread() -- initialize SS to a known state x86/agp: Fix agp_amd64_init and agp_amd64_cleanup x86: SGI UV: Fix mapping of MMIO registers x86: mce.h: Fix warning in header checks
2010-01-16Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futexes: Remove rw parameter from get_futex_key()
2010-01-16Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Check if /dev/null can be used as the -o gcc argument perf tools: Move QUIET_STDERR def to before first use perf: Stop stack frame walking off kernel addresses boundaries
2010-01-16Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing/filters: Add comment for match callbacks tracing/filters: Fix MATCH_FULL filter matching for PTR_STRING tracing/filters: Fix MATCH_MIDDLE_ONLY filter matching lib: Introduce strnstr() tracing/filters: Fix MATCH_END_ONLY filter matching tracing/filters: Fix MATCH_FRONT_ONLY filter matching ftrace: Fix MATCH_END_ONLY function filter tracing/x86: Derive arch from bits argument in recordmcount.pl ring-buffer: Add rb_list_head() wrapper around new reader page next field ring-buffer: Wrap a list.next reference with rb_list_head()
2010-01-16revert "drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer"Mark Brown
Fix divide by zero and broken output. Commit 600ce1a0fa ("fix clock setting for Samsung SoC Framebuffer") introduced a mandatory refresh parameter to the platform data for the S3C framebuffer but did not introduce any validation code, causing existing platforms (none of which have refresh set) to divide by zero whenever the framebuffer is configured, generating warnings and unusable output. Ben Dooks noted several problems with the patch: - The platform data supplies the pixclk directly and should already have taken care of the refresh rate. - The addition of a window ID parameter doesn't help since only the root framebuffer can control the pixclk. - pixclk is specified in picoseconds (rather than Hz) as the patch assumed. and suggests reverting the commit so do that. Without fixing this no mainline user of the driver will produce output. [akpm@linux-foundation.org: don't revert the correct bit] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16nommu: fix shared mmap after truncate shrinkage problemsDavid Howells
Fix a problem in NOMMU mmap with ramfs whereby a shared mmap can happen over the end of a truncation. The problem is that ramfs_nommu_check_mappings() checks that the reduced file size against the VMA tree, but not the vm_region tree. The following sequence of events can cause the problem: fd = open("/tmp/x", O_RDWR|O_TRUNC|O_CREAT, 0600); ftruncate(fd, 32 * 1024); a = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); b = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); munmap(a, 32 * 1024); ftruncate(fd, 16 * 1024); c = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); Mapping 'a' creates a vm_region covering 32KB of the file. Mapping 'b' sees that the vm_region from 'a' is covering the region it wants and so shares it, pinning it in memory. Mapping 'a' then goes away and the file is truncated to the end of VMA 'b'. However, the region allocated by 'a' is still in effect, and has _not_ been reduced. Mapping 'c' is then created, and because there's a vm_region covering the desired region, get_unmapped_area() is _not_ called to repeat the check, and the mapping is granted, even though the pages from the latter half of the mapping have been discarded. However: d = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); Mapping 'd' should work, and should end up sharing the region allocated by 'a'. To deal with this, we shrink the vm_region struct during the truncation, lest do_mmap_pgoff() take it as licence to share the full region automatically without calling the get_unmapped_area() file op again. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16nommu: fix race between ramfs truncation and shared mmapDavid Howells
Fix the race between the truncation of a ramfs file and an attempt to make a shared mmap of region of that file. The problem is that do_mmap_pgoff() calls f_op->get_unmapped_area() to verify that the file region is made of contiguous pages and to find its base address - but there isn't any locking to guarantee this region until vma_prio_tree_insert() is called by add_vma_to_mm(). Note that moving the functionality into f_op->mmap() doesn't help as that is also called before vma_prio_tree_insert(). Instead make ramfs_nommu_check_mappings() grab nommu_region_sem whilst it does its checks. This means that this function will wait whilst mmaps take place. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16nommu: don't need get_unmapped_area() for NOMMUDavid Howells
get_unmapped_area() is unnecessary for NOMMU as no-one calls it. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16nommu: remove a superfluous check of vm_region::vm_usageDavid Howells
In split_vma(), there's no need to check if the VMA being split has a region that's in use by more than one VMA because: (1) The preceding test prohibits splitting of non-anonymous VMAs and regions (eg: file or chardev backed VMAs). (2) Anonymous regions can't be mapped multiple times because there's no handle by which to refer to the already existing region. (3) If a VMA has previously been split, then the region backing it has also been split into two regions, each of usage 1. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16nommu: struct vm_region's vm_usage count need not be atomicDavid Howells
The vm_usage count field in struct vm_region does not need to be atomic as it's only even modified whilst nommu_region_sem is write locked. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16nommu: fix SYSV SHM for NOMMUDavid Howells
Commit c4caa778157dbbf04116f0ac2111e389b5cd7a29 ("file ->get_unmapped_area() shouldn't duplicate work of get_unmapped_area()") broke SYSV SHM for NOMMU by taking away the pointer to shm_get_unmapped_area() from shm_file_operations. Put it back conditionally on CONFIG_MMU=n. file->f_ops->get_unmapped_area() is used to find out the base address for a mapping of a mappable chardev device or mappable memory-based file (such as a ramfs file). It needs to be called prior to file->f_ops->mmap() being called. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16sysdev: fix prototype for memory_sysdev_class show/store functionsWu Fengguang
The function prototype mismatches in call stack: [<ffffffff81494268>] print_block_size+0x58/0x60 [<ffffffff81487e3f>] sysdev_class_show+0x1f/0x30 [<ffffffff811d629b>] sysfs_read_file+0xcb/0x1f0 [<ffffffff81176328>] vfs_read+0xc8/0x180 Due to prototype mismatch, print_block_size() will sprintf() into *attribute instead of *buf, hence user space will read the initial zeros from *buf: $ hexdump /sys/devices/system/memory/block_size_bytes 0000000 0000 0000 0000 0000 0000008 After patch: cat /sys/devices/system/memory/block_size_bytes 0x8000000 This complements commits c29af9636 and 4a0b2b4dbe. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: "Zheng, Shaohui" <shaohui.zheng@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16memory-hotplug: add 0x prefix to HEX block_size_bytesWu Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16memcg: ensure list is empty at rmdirDaisuke Nishimura
Current mem_cgroup_force_empty() only ensures mem->res.usage == 0 on success. But this doesn't guarantee memcg's LRU is really empty, because there are some cases in which !PageCgrupUsed pages exist on memcg's LRU. For example: - Pages can be uncharged by its owner process while they are on LRU. - race between mem_cgroup_add_lru_list() and __mem_cgroup_uncharge_common(). So there can be a case in which the usage is zero but some of the LRUs are not empty. OTOH, mem_cgroup_del_lru_list(), which can be called asynchronously with rmdir, accesses the mem_cgroup, so this access can cause a problem if it races with rmdir because the mem_cgroup might have been freed by rmdir. Actually, I saw a bug which seems to be caused by this race. [1530745.949906] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230 [1530745.950651] IP: [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] PGD 3863de067 PUD 3862c7067 PMD 0 [1530745.950651] Oops: 0002 [#1] SMP [1530745.950651] last sysfs file: /sys/devices/system/cpu/cpu7/cache/index1/shared_cpu_map [1530745.950651] CPU 3 [1530745.950651] Modules linked in: configs ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp nfsd nfs_acl auth_rpcgss exportfs autofs4 hidp rfcomm l2cap crc16 bluetooth lockd sunrpc ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_multipath scsi_dh video output sbs sbshc battery ac lp kvm_intel kvm sg ide_cd_mod cdrom serio_raw tpm_tis tpm tpm_bios acpi_memhotplug button parport_pc parport rtc_cmos rtc_core rtc_lib e1000 i2c_i801 i2c_core pcspkr dm_region_hash dm_log dm_mod ata_piix libata shpchp megaraid_mbox sd_mod scsi_mod megaraid_mm ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table] [1530745.950651] Pid: 19653, comm: shmem_test_02 Tainted: G M 2.6.32-mm1-00701-g2b04386 #3 Express5800/140Rd-4 [N8100-1065] [1530745.950651] RIP: 0010:[<ffffffff810fbc11>] [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] RSP: 0018:ffff8803863ddcb8 EFLAGS: 00010002 [1530745.950651] RAX: 00000000000001e0 RBX: ffff8803abc02238 RCX: 00000000000001e0 [1530745.950651] RDX: 0000000000000000 RSI: ffff88038611a000 RDI: ffff8803abc02238 [1530745.950651] RBP: ffff8803863ddcc8 R08: 0000000000000002 R09: ffff8803a04c8643 [1530745.950651] R10: 0000000000000000 R11: ffffffff810c7333 R12: 0000000000000000 [1530745.950651] R13: ffff880000017f00 R14: 0000000000000092 R15: ffff8800179d0310 [1530745.950651] FS: 0000000000000000(0000) GS:ffff880017800000(0000) knlGS:0000000000000000 [1530745.950651] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [1530745.950651] CR2: 0000000000000230 CR3: 0000000379d87000 CR4: 00000000000006e0 [1530745.950651] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1530745.950651] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [1530745.950651] Process shmem_test_02 (pid: 19653, threadinfo ffff8803863dc000, task ffff88038612a8a0) [1530745.950651] Stack: [1530745.950651] ffffea00040c2fe8 0000000000000000 ffff8803863ddd98 ffffffff810c739a [1530745.950651] <0> 00000000863ddd18 000000000000000c 0000000000000000 0000000000000000 [1530745.950651] <0> 0000000000000002 0000000000000000 ffff8803863ddd68 0000000000000046 [1530745.950651] Call Trace: [1530745.950651] [<ffffffff810c739a>] release_pages+0x142/0x1e7 [1530745.950651] [<ffffffff810c778f>] ? pagevec_move_tail+0x6e/0x112 [1530745.950651] [<ffffffff810c781e>] pagevec_move_tail+0xfd/0x112 [1530745.950651] [<ffffffff810c78a9>] lru_add_drain+0x76/0x94 [1530745.950651] [<ffffffff810dba0c>] exit_mmap+0x6e/0x145 [1530745.950651] [<ffffffff8103f52d>] mmput+0x5e/0xcf [1530745.950651] [<ffffffff81043ea8>] exit_mm+0x11c/0x129 [1530745.950651] [<ffffffff8108fb29>] ? audit_free+0x196/0x1c9 [1530745.950651] [<ffffffff81045353>] do_exit+0x1f5/0x6b7 [1530745.950651] [<ffffffff8106133f>] ? up_read+0x2b/0x2f [1530745.950651] [<ffffffff8137d187>] ? lockdep_sys_exit_thunk+0x35/0x67 [1530745.950651] [<ffffffff81045898>] do_group_exit+0x83/0xb0 [1530745.950651] [<ffffffff810458dc>] sys_exit_group+0x17/0x1b [1530745.950651] [<ffffffff81002c1b>] system_call_fastpath+0x16/0x1b [1530745.950651] Code: 54 53 0f 1f 44 00 00 83 3d cc 29 7c 00 00 41 89 f4 75 63 eb 4e 48 83 7b 08 00 75 04 0f 0b eb fe 48 89 df e8 18 f3 ff ff 44 89 e2 <48> ff 4c d0 50 48 8b 05 2b 2d 7c 00 48 39 43 08 74 39 48 8b 4b [1530745.950651] RIP [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] RSP <ffff8803863ddcb8> [1530745.950651] CR2: 0000000000000230 [1530745.950651] ---[ end trace c3419c1bb8acc34f ]--- [1530745.950651] Fixing recursive fault but reboot is needed! The problem here is pages on LRU may contain pointer to stale memcg. To make res->usage to be 0, all pages on memcg must be uncharged or moved to another(parent) memcg. Moved page_cgroup have already removed from original LRU, but uncharged page_cgroup contains pointer to memcg withou PCG_USED bit. (This asynchronous LRU work is for improving performance.) If PCG_USED bit is not set, page_cgroup will never be added to memcg's LRU. So, about pages not on LRU, they never access stale pointer. Then, what we have to take care of is page_cgroup _on_ LRU list. This patch fixes this problem by making mem_cgroup_force_empty() visit all LRUs before exiting its loop and guarantee there are no pages on its LRU. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16virtio: fix section mismatch warningsJeff Mahoney
Fix fixes the following warnings by renaming the driver structures to be suffixed with _driver. WARNING: drivers/virtio/virtio_balloon.o(.data+0x88): Section mismatch in reference from the variable virtio_balloon to the function .devexit.text:virtballoon_remove() WARNING: drivers/char/hw_random/virtio-rng.o(.data+0x88): Section mismatch in reference from the variable virtio_rng to the function .devexit.text:virtrng_remove() Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16vmscan: kswapd: don't retry balance_pgdat() if all zones are unreclaimableKOSAKI Motohiro
Commit f50de2d3 (vmscan: have kswapd sleep for a short interval and double check it should be asleep) can cause kswapd to enter an infinite loop if running on a single-CPU system. If all zones are unreclaimble, sleeping_prematurely return 1 and kswapd will call balance_pgdat() again. but it's totally meaningless, balance_pgdat() doesn't anything against unreclaimable zone! Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Reported-by: Will Newton <will.newton@gmail.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Tested-by: Will Newton <will.newton@gmail.com> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16smp_call_function_any(): pass the node value to cpumask_of_node()David John
The change in acpi_cpufreq to use smp_call_function_any causes a warning when it is called since the function erroneously passes the cpu id to cpumask_of_node rather than the node that the cpu is on. Fix this. cpumask_of_node(3): node > nr_node_ids(1) Pid: 1, comm: swapper Not tainted 2.6.33-rc3-00097-g2c1f189 #223 Call Trace: [<ffffffff81028bb3>] cpumask_of_node+0x23/0x58 [<ffffffff81061f51>] smp_call_function_any+0x65/0xfa [<ffffffff810160d1>] ? do_drv_read+0x0/0x2f [<ffffffff81015fba>] get_cur_val+0xb0/0x102 [<ffffffff81016080>] get_cur_freq_on_cpu+0x74/0xc5 [<ffffffff810168a7>] acpi_cpufreq_cpu_init+0x417/0x515 [<ffffffff81562ce9>] ? __down_write+0xb/0xd [<ffffffff8148055e>] cpufreq_add_dev+0x278/0x922 Signed-off-by: David John <davidjon@xenontk.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16kernel.h: add BUILD_BUG_ON_NOT_POWER_OF_2()Roland Dreier
Add BUILD_BUG_ON_NOT_POWER_OF_2() When code relies on a constant being a power of 2: #define FOO 512 /* must be a power of 2 */ it would be nice to be able to do: BUILD_BUG_ON(!is_power_of_2(FOO)); However applying an inline function does not result in a compile-time constant that can be used with BUILD_BUG_ON(), so trying that gives results in: error: bit-field '<anonymous>' width not an integer constant As suggested by akpm, rather than monkeying around with is_power_of_2() and risking gcc warts about constant expressions, just create a macro BUILD_BUG_ON_NOT_POWER_OF_2() to encapsulate this common requirement. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: David Dillow <dave@thedillows.org> Cc: "Robert P. J. Day" <rpjday@crashcourse.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16mm/page_alloc: fix the range check for backward mergingKazuhisa Ichikawa
The current check for 'backward merging' within add_active_range() does not seem correct. start_pfn must be compared against early_node_map[i].start_pfn (and NOT against .end_pfn) to find out whether the new region is backward-mergeable with the existing range. Signed-off-by: Kazuhisa Ichikawa <ki@epsilou.com> Acked-by: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16kfifo: document everywhere that size has to be power of twoAndi Kleen
On my first try using them I missed that the fifos need to be power of two, resulting in a runtime bug. Document that requirement everywhere (and fix one grammar bug) Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Stefani Seibold <stefani@seibold.net> Cc: Roland Dreier <rdreier@cisco.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Walls <awalls@radix.net> Cc: Vikram Dhillon <dhillonv10@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16kfifo: add kfifo_initializedAndi Kleen
Simple inline that checks if kfifo_init() has been executed on a fifo. This is useful for walking all per CPU fifos, when some of them might not have been brought up yet. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Stefani Seibold <stefani@seibold.net> Cc: Roland Dreier <rdreier@cisco.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Walls <awalls@radix.net> Cc: Vikram Dhillon <dhillonv10@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16kfifo: add kfifo_out_peekAndi Kleen
In some upcoming code it's useful to peek into a FIFO without permanentely removing data. This patch implements a new kfifo_out_peek() to do this. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Stefani Seibold <stefani@seibold.net> Cc: Roland Dreier <rdreier@cisco.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Walls <awalls@radix.net> Cc: Vikram Dhillon <dhillonv10@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16kfifo: sanitize *_user error handlingAndi Kleen
Right now for kfifo_*_user it's not easily possible to distingush between a user copy failing and the FIFO not containing enough data. The problem is that both conditions are multiplexed into the same return code. Avoid this by moving the "copy length" into a separate output parameter and only return 0/-EFAULT in the main return value. I didn't fully adapt the weird "record" variants, those seem to be unused anyways and were rather messy (should they be just removed?) I would appreciate some double checking if I did all the conversions correctly. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Stefani Seibold <stefani@seibold.net> Cc: Roland Dreier <rdreier@cisco.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Walls <awalls@radix.net> Cc: Vikram Dhillon <dhillonv10@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16kfifo: use void * pointers for user buffersAndi Kleen
The pointers to user buffers are currently unsigned char *, which requires a lot of casting in the caller for any non-char typed buffers. Use void * instead. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Stefani Seibold <stefani@seibold.net> Cc: Roland Dreier <rdreier@cisco.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Walls <awalls@radix.net> Cc: Vikram Dhillon <dhillonv10@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16tty.h: make tty_port_get() static inlineRandy Dunlap
I get a few dozen of these warnings when using gcc (GCC) 4.4.1 20090725 (Red Hat 4.4.1-2): In file included from mmotm-2010-0113-1217/init/do_mounts.c:5: mmotm-2010-0113-1217/include/linux/tty.h: In function 'tty_port_get': mmotm-2010-0113-1217/include/linux/tty.h:469: warning: '______f' is static but declared in inline function 'tty_port_get' which is not static so make the function static inline. [akpm@linux-foundation.org: may as well convert tty_port_users() also] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16edac: i5000_edac critical fix panic out of boundsTamas Vincze
EDAC MC0: INTERNAL ERROR: channel-b out of range (4 >= 4) Kernel panic - not syncing: EDAC MC0: Uncorrected Error (XEN) Domain 0 crashed: 'noreboot' set - not rebooting. This happens because FERR_NF_FBD bit 28 is not updated on i5000. Due to that, both bits 28 and 29 may be equal to one, returning channel = 3. As this value is invalid, EDAC core generates the panic. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14568 Signed-off-by: Tamas Vincze <tom@vincze.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16m68knommu: fix invalid flags on coldfire pit clocksourcejohn stultz
The m68knommu coldfire pit clocksource looks like it was incorrectly marked as a continuous clocksource. Running with it marked as a continuous clocksource could cause hangs when the system switches to highres mode or enables nohz. This patch removes the CLOCK_SOURCE_IS_CONTINUOUS flag on the coldfire pit clocksource. This will disallow systems using this clocksource from entering oneshot mode (disabling highres timers and nohz). Signed-off-by: John Stultz <johnstul@us.ibm.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Cc: Steven King <sfking@fdwdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16serial/8250_pnp: add a new Fujitsu Wacom Tablet PC devicePing
This is a new two finger touch Fujitsu Wacom Tablet PC. Signed-off-by: Ping Cheng <pingc@wacom.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16markup_oops.pl: fix error with x86Hui Zhu
When I try to use markup_oops.pl in x86, I always get: cat 1 | perl markup_oops.pl ./vmlinux objdump: --start-address: bad number: NaN No matching code found This is because in line: if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/[a-f0-9]/) { $function = $1; $func_offset = $2; } $func_offset will get a number like "0x2" But in follow code: my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset"); It add other ox to ox2. Then this value will be set to NaN. So I made a small patch to fix it. Signed-off-by: Hui Zhu <teawater@gmail.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16viafb: fix acceleration for some chipsErik-Jan Post
Fix a regression in hardware acceleration which made the accelerated framebuffer unusable on some chips. These need extra initialization and an extra flag which is no longer needed/available on current chips. Signed-off-by: Erik-Jan Post <ej.lfs@xs4all.nl> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16viafb: do modesetting after updating variablesErik-Jan Post
Reorder viafb_set_par to allow using the updated variables in viafb_setmode. This fixes a regression that prevented proper runtime mode changes. Signed-off-by: Erik-Jan Post <ej.lfs@xs4all.nl> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16viafb: fix LCD hardware cursor regressionFlorian Tobias Schandinat
Although I'd consider this a hardware bug, as there is hardware out that for whatever reason does not support hardware cursors on LCD output we have to care about it in the driver. This fixes a regression (invisible cursor) introduced by: viafb: cleanup viafb_cursor Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Reported-by: Julian Wollrath <jwollrath@web.de> Tested-by: Julian Wollrath <jwollrath@web.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16kfifo: fix kfifo_out_locked race bugStefani Seibold
Fix a wrong optimization in include/linux/kfifo.h which could cause a race in kfifo_out_locked. Signed-off-by: Stefani Seibold <stefani@seibold.net> Reported-by: Johan Hovold <jhovold@gmail.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16i2c: Do not use device name after device_unregisterThadeu Lima de Souza Cascardo
dev_dbg outputs dev_name, which is released with device_unregister. This bug resulted in output like this: i2c Xy2�0: adapter [SMBus I801 adapter at 1880] unregistered The right output would be: i2c i2c-0: adapter [SMBus I801 adapter at 1880] unregistered Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-16i2c/pca: Don't use *_interruptibleWolfram Sang
Unexpected signals can disturb the bus-handling and lock it up. Don't use interruptible in 'wait_event_*' and 'wake_*' as in commits dc1972d02747d2170fb1d78d114801f5ecb27506 (for cpm), 1ab082d7cbd0f34e39a5396cc6340c00bc5d66ef (for mpc), b7af349b175af45f9d87b3bf3f0a221e1831ed39 (for omap). Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-16i2c-ali1563: Remove sparse warningsMárton Németh
Remove the following sparse warnings (see "make C=1"): * drivers/i2c/busses/i2c-ali1563.c:91:3: warning: do-while statement is not a compound statement * drivers/i2c/busses/i2c-ali1563.c:161:3: warning: do-while statement is not a compound statement Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-16i2c: Test off by one in {piix4,vt596}_transaction()Roel Kluin
With `while (timeout++ < MAX_TIMEOUT)' timeout reaches MAX_TIMEOUT + 1 after the loop. This is probably unlikely to produce a problem. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-16i2c-core: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: enable 36bit physical address for hardware status page drm/i915: fix eDP pipe mask drm/i915: fix pixel color depth setting on eDP drm/i915: parse eDP panel color depth from VBT block drm/i915: disable LVDS downclock by default drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register drm/i915: Remove chatty execbuf failure message. drm/i915: remove loop in Ironlake interrupt handler drm/i915: Don't wait interruptible for possible plane buffer flush drm/i915: try another possible DDC bus for the SDVO device with multiple outputs drm/i915: Read the response after issuing DDC bus switch command drm/i915: Don't use the child device parsed from VBT to setup HDMI/DP drm/i915: Fix resume regression on MSI Wind U100 w/o KMS drm/i915: Fix Ironlake M/N/P ranges to match the spec drm/i915: Use find_pll function to calculate DPLL setting for LVDS downclock drm/i915: Add HP nx9020/SamsungSX20S to ACPI LID quirk list drm/i915: disable TV hotplug status check Trivial conflicts in drivers/gpu/drm/i915/i915_drv.c due to i915 non-modeset suspend fix with different comment.
2010-01-16do_add_mount() should sanitize mnt_flagsAl Viro
MNT_WRITE_HOLD shouldn't leak into new vfsmount and neither should MNT_SHARED (the latter will be set properly, along with the rest of shared-subtree data structures) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-16CIFS shouldn't make mountpoints shrinkableAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-16mnt_flags fixes in do_remount()Al Viro
* need vfsmount_lock over modifying it * need to preserve MNT_SHARED/MNT_UNBINDABLE Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-16attach_recursive_mnt() needs to hold vfsmount_lock over set_mnt_shared()Al Viro
race in mnt_flags update Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>