aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-29powerpc/64s: Drop no longer used IDLE_STATE_ENTER_SEQNicholas Piggin
There are no longer any callers of IDLE_STATE_ENTER_SEQ, all callers use IDLE_STATE_ENTER_SEQ_NORET. So drop the former. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Split out of larger patch, write change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-29powerpc/64s: POWER9 can execute stop without a sync sequenceNicholas Piggin
We don't need to use IDLE_STATE_ENTER_SEQ_NORET on Power9. Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-29powerpc/64s: Move IDLE_STATE_ENTER_SEQ[_NORET] into idle_book3s.SNicholas Piggin
This macro is only used in idle_book3s.S, move it in there and add a more descriptive comment. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Split out of larger patch and write change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-29Merge branch 'topic/ppc-kvm' into nextMichael Ellerman
Merge Nicks commit to rework the KVM thread management, shared with the KVM tree via the ppc-kvm topic branch.
2017-08-29KVM: PPC: Book3S HV: POWER9 does not require secondary thread managementNicholas Piggin
POWER9 CPUs have independent MMU contexts per thread, so KVM does not need to quiesce secondary threads, so the hwthread_req/hwthread_state protocol does not have to be used. So patch it away on POWER9, and patch away the branch from the Linux idle wakeup to kvm_start_guest that is never used. Add a warning and error out of kvmppc_grab_hwthread in case it is ever called on POWER9. This avoids a hwsync in the idle wakeup path on POWER9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Paul Mackerras <paulus@ozlabs.org> [mpe: Use WARN(...) instead of WARN_ON()/pr_err(...)] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/6xx: Drop removed CONFIG_USB_LEDMichael Ellerman
In commit a335aaf3125c ("usb: misc: remove outdated USB LED driver") CONFIG_USB_LED was removed, so drop it from our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/6xx: Drop no longer selectable CONFIG_BT_HCIUART_LLMichael Ellerman
Since commit 76c4969fecb1 ("Bluetooth: hci_uart: fix kconfig dependency") we can no longer select CONFIG_BT_HCIUART_LL. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/c2k: Switch CONFIG_GEN_RTC from =m to =yMichael Ellerman
In commit 835ea93e9d26 ("char/genrtc: remove powerpc support"), CONFIG_GEN_RTC switch from tristate to bool, update the defconfig to match. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/6xx: Switch CONFIG_USB_EHCI_FSL to =mMichael Ellerman
In commit ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module"), CONFIG_USB_EHCI_FSL was switched from built-in to modular. Update the defconfig. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/6xx: Drop no longer needed CONFIG_BT_HCIUART_H4Michael Ellerman
Since commit 943cc592195e ("Bluetooth: bpa10x: Use h4_recv_buf helper for frame reassembly") we no longer need to set CONFIG_BT_HCIUART_H4 in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/6xx: Drop no longer needed CONFIG_NETFILTER_XT_MATCH_SOCKETMichael Ellerman
Since commit 8db4c5be88f6 ("netfilter: move socket lookup infrastructure to nf_socket_ipv{4,6}.c") we no longer need to set CONFIG_NETFILTER_XT_MATCH_SOCKET in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/6xx: Reinstate CONFIG_CPU_FREQ_STATMichael Ellerman
In commit 1aefc75b2449 ("cpufreq: stats: Make the stats code non-modular"), the CPU_FREQ_STAT code was made non-modular. Our defconfig still said =m though, which meant we no longer got the code at all. Switch the defconfig to =y. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/6xx: Drop no longer needed CONFIG_NF_CONNTRACK_PROC_COMPATMichael Ellerman
Since commit adf0516845bc ("netfilter: remove ip_conntrack* sysctl compat code") we no longer need to set CONFIG_NF_CONNTRACK_PROC_COMPAT in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/6xx: Drop removed CONFIG_BLK_DEV_HDMichael Ellerman
In commit 8e14be53f470 ("remove the obsolete hd driver") the CONFIG_BLK_DEV_HD symbol was removed, so drop it from the defconfig. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/6xx: Clean up duplicate CONFIG_EXT4 valuesMichael Ellerman
We had two values for CONFIG_EXT4, =m and =y, just use =y. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/6xx: Drop no longer needed CONFIG_TIMER_STATSMichael Ellerman
Since commit dfb4357da6dd ("time: Remove CONFIG_TIMER_STATS") we no longer need to set CONFIG_TIMER_STATS in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/6xx: Turn CONFIG_DRM_RADEON back onMichael Ellerman
In commit d92d9c3a1448 ("drm: hide legacy drivers with CONFIG_DRM_LEGACY") CONFIG_DRM_RADEON was moved behind CONFIG_DRM_LEGACY meaning it stopped being enabled by ppc6xx_defconfig. Although no one has noticed, given this is basically a legacy platform, it seems anyone who is using it probably still wants this driver. So turn it back on for now. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs/mpc5200: Drop no longer needed CONFIG_FBMichael Ellerman
Since commit a03fdcb18632 ("drm: Add top level Kconfig option for DRM fbdev emulation") we no longer need to set CONFIG_FB in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Update for CONFIG_INPUT_MOUSEDEV=nMichael Ellerman
In commit 73d8ef76006b ("Input: mousedev - stop offering PS/2 to userspace by default") the symbol INPUT_MOUSEDEV went from being 'default y' to 'default n' (implied). That means we no longer need to explicitly disable it in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop removed CONFIG_LOGFSMichael Ellerman
In commit 1d0fd57a50aa ("logfs: remove from tree"), logfs was removed from the tree, so we can drop it from our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Turn CONFIG_R128 back in pmac32_defconfigMichael Ellerman
In commit d92d9c3a1448 ("drm: hide legacy drivers with CONFIG_DRM_LEGACY") CONFIG_R128 was moved behind CONFIG_DRM_LEGACY meaning it stopped being enabled by pmac32_defconfig. Although no one has noticed, given this is basically a legacy platform, it seems anyone who is using it probably still wants this driver. So turn it back on for now. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_LIBCRC32CMichael Ellerman
Since commit 300ae149468f ("netfilter: select LIBCRC32C together with SCTP conntrack") we no longer need to set CONFIG_LIBCRC32C in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop unnecessary CONFIG_EDAC from ppc64eMichael Ellerman
There are no EDAC drivers for ppc64e. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_SCSIMichael Ellerman
Since commit 67f6d6655993 ("powerpc: convert amigaone_defconfig to use libata PATA drivers") we no longer need to set CONFIG_SCSI in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_IPV6Michael Ellerman
Since commit de551f2eb22a ("net: Build IPv6 into kernel by default") we no longer need to set CONFIG_IPV6 in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Add CONFIG_RAS now required for CONFIG_EDACMichael Ellerman
In commit e3c4ff6d8c94 ("EDAC: Remove EDAC_MM_EDAC") CONFIG_EDAC grew a dependency on CONFIG_RAS. Some of our defconfigs don't have the latter, which means we lose CONFIG_EDAC, so add CONFIG_RAS to fix that. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_AUDITSYSCALLMichael Ellerman
Since commit cb74ed278f80 ("audit: always enable syscall auditing when supported and audit is enabled") we no longer need to set CONFIG_AUDITSYSCALL in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop CONFIG_SERIAL_TXX9_* from cell/ppc64Michael Ellerman
In commit bf4981a00636 ("powerpc: Remove the celleb support") we dropped the celleb support, which made these symbols unselectable because we no longer select HAS_TX99_SERIAL. So drop them from the defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop MEMORY_HOTREMOVE from ppc64/cellMichael Ellerman
xxxx In commit 577ec789a79e ("powerpc/cell: Drop select of MEMORY_HOTPLUG") we removed the last traces of any dependency between Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop unnecessary CONFIG_POWERNV_OP_PANELMichael Ellerman
In commit 43a1dd9b5fc6 ("powerpc/powernv: Add driver for operator panel on FSP machines") we added CONFIG_POWERNV_OP_PANEL=m to the powernv defconfig, but it's default m so that's no necessary. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed PCI_MSI on powernvMichael Ellerman
In commit a311e738b6d8 ("powerpc/powernv: Make PCI non-optional") we made PCI (and therefore PCI_MSI) non-optional on powernv, so it doesn't need to be in the defconfig anymore. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_SMP for pseries/ppc64/powernvMichael Ellerman
In commit 40e275653e2c ("powerpc/powernv: Always enable SMP when building powernv") and 270e2dc9b803 ("powerpc/pseries: Always enable SMP when building pseries") we forced CONFIG_SMP on for some configs. Therefore we don't need to set it in those configs anymore. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop unnecessary CONFIG_UPROBE_EVENTMichael Ellerman
In commit 6b0b7551428e ("perf/core: Rename CONFIG_[UK]PROBE_EVENT to CONFIG_[UK]PROBE_EVENTS") it was renamed to CONFIG_UPROBE_EVENTS. Additionally it's default y, and we have the prerequisites enabled, so we don't need it in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop unnecessary CONFIG_NUMA_BALANCING_DEFAULT_ENABLEDMichael Ellerman
In commit 9654f95a081a ("powerpc: Enable NUMA balancing in pseries[_le]_defconfig") we added CONFIG_NUMA_BALANCING_DEFAULT_ENABLED to our defconfigs. But it's already enabled by default, so drop it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_DEVPTS_MULTIPLE_INSTANCESMichael Ellerman
Since commit eedf265aa003 ("devpts: Make each mount of devpts an independent filesystem.") we no longer need to set CONFIG_DEVPTS_MULTIPLE_INSTANCES in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_CRYPTO_GCMMichael Ellerman
Since commit 00b9cfa3ff38 ("mac80111: Add GCMP and GCMP-256 ciphers") we no longer need to set CONFIG_CRYPTO_GCM in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_CRYPTO_NULL in g5 / c2kMichael Ellerman
Since commit 3491244c6298 ("crypto: echainiv - Set Kconfig default to m") we no longer need to set CONFIG_CRYPTO_NULL in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_CRYPTO_NULLMichael Ellerman
Since commit 00b9cfa3ff38 ("mac80111: Add GCMP and GCMP-256 ciphers") we no longer need to set CONFIG_CRYPTO_NULL in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_CRYPTO_SHA256Michael Ellerman
Since commit 826775bbf38f ("crypto: drbg - Add select on sha256") we no longer need to set CONFIG_CRYPTO_SHA256 in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_CRYPTO_ECBMichael Ellerman
Since commit 12cb3a1c4184 ("crypto: xts - Add ECB dependency") we no longer need to set CONFIG_CRYPTO_ECB in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_CRYPTO_HMACMichael Ellerman
Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_HMAC in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_CRYPTO_DEV_VMX_ENCRYPTMichael Ellerman
Since commit ccf5c442a1b8 ("crypto: vmx - Convert to CPU feature based module autoloading") we no longer need to set CONFIG_CRYPTO_DEV_VMX_ENCRYPT in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Update for CONFIG_NF_CT_PROTO_(SCTP|UDPLITE)=yMichael Ellerman
In commit a85406afeb3e ("netfilter: conntrack: built-in support for SCTP"), NF_CT_PROTO_SCTP switched from tristate to bool and became default y. Similarly in commit 9b91c96c5d1f ("netfilter: conntrack: built-in support for UDPlite"), NF_CT_PROTO_UDPLITE switched from tristate to bool and became default y. We had a few configs which set them to =m, which is no longer valid. We don't need to change them to =y because both symbols are default y and are enabled automatically based on the other symbols in the affected defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Update for CONFIG_FIXED_PHY being selected by CONFIG_OF_MDIOMichael Ellerman
In commit a5e4bd991362 ("of_mdio: select fixed phy support unconditionally"), CONFIG_OF_MDIO began selecting CONFIG_FIXED_PHY. That means we no longer need to set it some of our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Update for CONFIG_DEBUG_FS being selected via CONFIG_RCU_TRACEMichael Ellerman
In commit 961518259b3b ("rcu: Enable RCU tracepoints by default to aid in debugging"), CONFIG_RCU_TRACE was made default y (if CONFIG_TREE_RCU=y, which it is for some of our configs). That in turn causes CONFIG_TREE_RCU_TRACE to be enabled, which selects CONFIG_DEBUG_FS. The end result is that CONFIG_DEBUG_FS is forced on, meaning we don't have to enable it in some of our configs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_DEVKMEMMichael Ellerman
Since commit e334cd69fa65 ("Move CONFIG_DEVKMEM default to n") we no longer need to set CONFIG_DEVKMEM in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_FHANDLEMichael Ellerman
Since commit f76be61755c5 ("Make CONFIG_FHANDLE default y") we no longer need to set CONFIG_FHANDLE in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Explicitly drop CONFIG_INPUT_MOUSEDEVMichael Ellerman
In commit 73d8ef76006b ("Input: mousedev - stop offering PS/2 to userspace by default") (Jan 2017), CONFIG_INPUT_MOUSEDEV was switched from default y to default n, with the explanation: Evdev interface has been available for many years and by now everyone is switched to using it, so let's stop offering /dev/input/mouseN and /dev/psaux by default. We had a number of configs which had it enabled, but going by the above explanation probably don't need it enabled anymore. So drop the last remnants of it from our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNGMichael Ellerman
Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Update for symbol movement onlyMichael Ellerman
Update defconfigs for symbols that have moved around, without their value changing. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 21:12:10 +0000