aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-09ASoC: ams-delta: Take control over audio mute GPIO pinsJanusz Krzysztofik
Since commit 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused GPIOs"), on-board audio has appeared muted. It has been discovered that believed to be unused GPIO pins "hookflash1" and "hookflash2" need to be set low for audible sound in handsfree and handset mode respectively. According to Amstrad E3 wiki, the purpose of both pins hasn't been clearly identified. Original Amstrad software used to produce a high pulse on them when the phone was taken off hook or recall was pressed. With the current findings, we can assume the pins provide a kind of audio mute function, separately for handset and handsfree operation modes. Commit 2afdb4c41d78 ("ARM: OMAP1: ams-delta: Fix audio permanently muted") attempted to fix the issue temporarily by hogging the GPIO pin "hookflash1" renamed to "audio_mute", however the fix occurred incomplete as it restored audible sound only for handsfree mode. Stop hogging that pin, rename the pins to "handsfree_mute" and "handset_mute" respectively and implement appropriate DAPM event callbacks for "Speaker" and "Earpiece" DAPM widgets. Fixes: 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused GPIOs") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190907111650.15440-1-jmkrzyszt@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-09ASoC: dmaengine: Make the pcm->name equal to pcm->id if the name is not setPeter Ujfalusi
Some tools use the snd_pcm_info_get_name() to try to identify PCMs or for other purposes. Currently it is left empty with the dmaengine-pcm, in this case copy the pcm->id string as pcm->name. For example IGT is using this to find the HDMI PCM for testing audio on it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reported-by: Arthur She <arthur.she@linaro.org> Link: https://lore.kernel.org/r/20190906055524.7393-1-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-30ASoC: ti: davinci-i2s: Move the XSYNCERR workaround to .prepare callbackPeter Ujfalusi
Currently the driver uses snd_soc_rtdcom_lookup() in it's mcbsp_start function to try to stop/restart the DMA as the initial XSYNCERR workaround need to be done before the DMA is armed. There are couple of things wrong with this: - the driver crashes with NULL pointer dereference as the component->driver->ops is actually NULL - the driver should not use snd_soc_rtdcom_lookup() in the first place - Fiddling with DMA is never a good thing Move the workaround handling to .prepare which is called before the DMA is armed, so it complies with the requirements. Reported-by (usage of snd_soc_rtdcom_lookup): Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190830103841.25128-3-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-29ASoC: Intel: Baytrail: Fix implicit fallthrough warningCezary Rojewski
Append fallthrough statement to fix warning reported during compilation. Fixes: b80d19c166c4 ("ASoC: Intel: Restore Baytrail ADSP streams only when ADSP was in reset") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190828095102.15737-1-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-29ASoC: fsl_ssi: Fix clock control issue in master modeShengjiu Wang
The test case is arecord -Dhw:0 -d 10 -f S16_LE -r 48000 -c 2 temp.wav & aplay -Dhw:0 -d 30 -f S16_LE -r 48000 -c 2 test.wav There will be error after end of arecord: aplay: pcm_write:2051: write error: Input/output error Capture and Playback work in parallel in master mode, one substream stops, the other substream is impacted, the reason is that clock is disabled wrongly. The clock's reference count is not increased when second substream starts, the hw_param() function returns in the beginning because first substream is enabled, then in end of first substream, the hw_free() disables the clock. This patch is to move the clock enablement to the place before checking of the device enablement in hw_param(). Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1567012817-12625-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-27ASoC: mediatek: mt8183: fix tdm out data align issueJiaxin Yu
Mt8183 tdm out support S16_LE/S24_LE/S32_LE formats. When output S32_LE, we need set hd_align so that memif can output MSB 24bits. When output S24_LE, we need reset hd_align so that memif can output LSB 24bits. Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://lore.kernel.org/r/1566622726-27113-1-git-send-email-jiaxin.yu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-27ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slotShuming Fan
The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-27ASoC: es8316: fix inverted L/R of headphone mixer volumeKatsuhiro Suzuki
This patch fixes inverted Left-Right channel of headphone mixer volume by wrong shift_left, shift_right values. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Reviewed-by: Daniel Drake <drake@endlessm.com> Link: https://lore.kernel.org/r/20190826153900.25969-2-katsuhiro@katsuster.net Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-27ASoC: es8316: fix headphone mixer volume tableKatsuhiro Suzuki
This patch fix setting table of Headphone mixer volume. Current code uses 4 ... 7 values but these values are prohibited. Correct settings are the following: 0000 -12dB 0001 -10.5dB 0010 -9dB 0011 -7.5dB 0100 -6dB 1000 -4.5dB 1001 -3dB 1010 -1.5dB 1011 0dB Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Reviewed-by: Daniel Drake <drake@endlessm.com> Link: https://lore.kernel.org/r/20190826153900.25969-1-katsuhiro@katsuster.net Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-27ASoC: Intel: NHLT: Fix debug print formatAmadeusz Sławiński
oem_table_id is 8 chars long, so we need to limit it, otherwise it may print some unprintable characters into dmesg. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com> Link: https://lore.kernel.org/r/20190827141712.21015-7-amadeuszx.slawinski@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-08-27ASoC: dapm: Expose snd_soc_dapm_new_control_unlocked properlyAmadeusz Sławiński
We use snd_soc_dapm_new_control_unlocked for topology and have local declaration, instead declare it properly in header like already declared snd_soc_dapm_new_control. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com> Link: https://lore.kernel.org/r/20190827141712.21015-4-amadeuszx.slawinski@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-27ASoC: Intel: Fix use of potentially uninitialized variableAmadeusz Sławiński
If ipc->ops.reply_msg_match is NULL, we may end up using uninitialized mask value. reported by smatch: sound/soc/intel/common/sst-ipc.c:266 sst_ipc_reply_find_msg() error: uninitialized symbol 'mask'. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com> Link: https://lore.kernel.org/r/20190827141712.21015-3-amadeuszx.slawinski@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-08-27ASoC: Intel: Skylake: Use correct function to access iomem spaceAmadeusz Sławiński
For copying from __iomem, we should use __ioread32_copy. reported by sparse: sound/soc/intel/skylake/skl-debug.c:437:34: warning: incorrect type in argument 1 (different address spaces) sound/soc/intel/skylake/skl-debug.c:437:34: expected void [noderef] <asn:2> *to sound/soc/intel/skylake/skl-debug.c:437:34: got unsigned char * sound/soc/intel/skylake/skl-debug.c:437:51: warning: incorrect type in argument 2 (different address spaces) sound/soc/intel/skylake/skl-debug.c:437:51: expected void const *from sound/soc/intel/skylake/skl-debug.c:437:51: got void [noderef] <asn:2> *[assigned] fw_reg_addr Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com> Link: https://lore.kernel.org/r/20190827141712.21015-2-amadeuszx.slawinski@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-08-22ASoC: AMD: Fix Kconfig warning without GPIOLIBYueHaibing
While do rand build without GPIOLIB, we get Kconfig warning:\ WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A Depends on [n]: SOUND [=y] && !UML && SND [=m] && SND_SOC [=m] && GPIOLIB [=n] Selected by [m]: - SND_SOC_AMD_CZ_DA7219MX98357_MACH [=m] && SOUND [=y] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_AMD_ACP [=m] && I2C [=y] Add GPIOLIB dependency to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190822143007.73644-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-20ASoC: mchp-i2s-mcc: Wait for RX/TX RDY only if controller is runningCodrin Ciubotariu
Since hw_free() can be called multiple times and not just after a stop trigger command, we should check whether the RX or TX ready interrupt was truly enabled previously. For this, we assure that the condition of the wait event is always true, except when RX/TX interrupts are enabled. Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20190820162411.24836-3-codrin.ciubotariu@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-20ASoC: mchp-i2s-mcc: Fix unprepare of GCLKCodrin Ciubotariu
If hw_free() gets called after hw_params(), GCLK remains prepared, preventing further use of it. This patch fixes this by unpreparing the clock in hw_free() or if hw_params() gets an error. Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20190820162411.24836-2-codrin.ciubotariu@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-20ASoC: sun4i-i2s: Register regmap and PCM before our componentMaxime Ripard
So far the regmap and the dmaengine PCM are registered after our component has been, which means that our driver isn't properly initialised by then. Let's fix that. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://lore.kernel.org/r/67e303f37f141ef73ce9ed47d7f831b63c694424.1566242458.git-series.maxime.ripard@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-20ASoC: wm8904: implement input mode select as a muxMichał Mirosław
Make '* Capture Mode' a mux. This makes DAPM know that in single-ended mode only inverting mux paths need to be enabled. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/125cd3c9f298da9b08a4d6002d4c00d70a898950.1566298834.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-20ASoC: wm8904: fix typo in DAPM kcontrol nameMichał Mirosław
Trivial fix for typo in "Capture Inverting Mux"es' name. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/f95ae1085f9f3c137a122c4d95728711613c15f7.1566298834.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-20ASoC: intel: cht_bsw_max98090_ti: Add all Chromebooks that need ↵Daniel Stuart
pmc_plt_clk_0 quirk Every single baytrail chromebook sets PMC to 0, as can be seeing below by searching through coreboot source code: $ grep -rl "PMC_PLT_CLK\[0\]" . ./rambi/variants/glimmer/devicetree.cb ./rambi/variants/clapper/devicetree.cb ./rambi/variants/swanky/devicetree.cb ./rambi/variants/enguarde/devicetree.cb ./rambi/variants/winky/devicetree.cb ./rambi/variants/kip/devicetree.cb ./rambi/variants/squawks/devicetree.cb ./rambi/variants/orco/devicetree.cb ./rambi/variants/ninja/devicetree.cb ./rambi/variants/heli/devicetree.cb ./rambi/variants/sumo/devicetree.cb ./rambi/variants/banjo/devicetree.cb ./rambi/variants/candy/devicetree.cb ./rambi/variants/gnawty/devicetree.cb ./rambi/variants/rambi/devicetree.cb ./rambi/variants/quawks/devicetree.cb Plus, Cyan (only non-baytrail chromebook with max98090) also needs this patch for audio to work. Thus, this commit adds all the missing devices to bsw_max98090 quirk table, implemented by commit a182ecd3809c ("ASoC: intel: cht_bsw_max98090_ti: Add quirk for boards using pmc_plt_clk_0"). Signed-off-by: Daniel Stuart <daniel.stuart14@gmail.com> Link: https://lore.kernel.org/r/20190815171300.30126-1-daniel.stuart14@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-20ASoC: meson: g12a-tohdmitx: require regmap mmioJerome Brunet
The tohdmitx glue uses regmap MMIO so it should require it. Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190820123510.22491-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-20ASoC: meson: axg-tdm-formatter: free reset on device removalJerome Brunet
Use the devm variant to get the formatter reset so it is properly freed on device removal Fixes: 751bd5db5260 ("ASoC: meson: axg-tdm-formatter: add reset") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190820123413.22249-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-20ASoC: uniphier: Fix double reset assersion when transitioning to suspend stateKunihiko Hayashi
When transitioning to supend state, uniphier_aio_dai_suspend() is called and asserts reset lines and disables clocks. However, if there are two or more DAIs, uniphier_aio_dai_suspend() are called multiple times, and double reset assersion will cause. This patch defines the counter that has the number of DAIs at first, and whenever uniphier_aio_dai_suspend() are called, it decrements the counter. And only if the counter is zero, it asserts reset lines and disables clocks. In the same way, uniphier_aio_dai_resume() are called, it increments the counter after deasserting reset lines and enabling clocks. Fixes: 139a34200233 ("ASoC: uniphier: add support for UniPhier AIO CPU DAI driver") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1566281764-14059-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-16ASoC: imx-audmux: Add driver suspend and resume to support MEGA FastShengjiu Wang
For i.MX6 SoloX, there is a mode of the SoC to shutdown all power source of modules during system suspend and resume procedure. Thus, AUDMUX needs to save all the values of registers before the system suspend and restore them after the system resume. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1565931794-7218-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-15ASoC: wm8737: Fix copy-paste error in wm8737_snd_controlsYueHaibing
sound/soc/codecs/wm8737.c:112:29: warning: high_3d defined but not used [-Wunused-const-variable=] 'high_3d' should be used for 3D High Cut-off. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 2a9ae13a2641 ("ASoC: Add initial WM8737 driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190815091920.64480-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-15ASoC: cs4349: Use PM ops 'cs4349_runtime_pm'YueHaibing
sound/soc/codecs/cs4349.c:358:32: warning: cs4349_runtime_pm defined but not used [-Wunused-const-variable=] cs4349_runtime_pm ops already defined, it seems we should enable it. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e40da86 ("ASoC: cs4349: Add support for Cirrus Logic CS4349") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190815090157.70036-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-15ASoC: es8328: Fix copy-paste error in es8328_right_line_controlsYueHaibing
It seems 'es8328_rline_enum' should be used in es8328_right_line_controls Fixes: 567e4f98922c ("ASoC: add es8328 codec driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190815092300.68712-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-13ASoC: rockchip: rockchip_max98090: Set period size to 240Cheng-Yi Chiang
From stress testing of arecord, we found that period size greater than ~900 will bring pl330 to DYING state and can not recover within 100 iterations. The result is that arecord will stuck and get I/O error, and issue can not be recovered until reboot. This issue does not happen when period size is small. Set constraint of period size to 240 to prevent such issue. With the constraint, there will be no issue after 2000 iterations. We can revert this patch once the root cause is found in rockchip's pl330 implementation. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20190813074430.191791-1-cychiang@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-12ASoC: Intel: sof-rt5682: add dmic dapm widget to support dmic PCMKeyon Jie
We need add DAPM MIC endpoint widget "SoC DMIC" and route, to enable DMIC PCM DAPM support. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190809232236.21182-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-09ASoC: hdac_hdmi: Offload dapm update at jack detectionTakashi Iwai
hdac_hdmi_present_sense() calls the audio component to get ELD update, then it reports the jack status change and updates DAPM graph accordingly. This works when it's called from the normal code paths. However, it may lead to a dead lock when it's called from the audio component notifier. Namely, the DAPM update involves with the runtime PM, and it eventually calls again the audio component get_power() ops. Since i915 driver already takes a mutex around the audio component ops calls, we'll eventually get the mutex doubly. As a workaround, in this patch, only the jack state is updated in the code path from hdac_hdmi_eld_notify_cb(), and the DAPM update is deferred to a work so that it's processed in another context. Reported-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190809151531.24359-1-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-08ASoC: hdac_hda: fix page fault issue by removing raceKeyon Jie
There is a race between hda codec device removing and the jack-detecting work, which will lead to a page fault issue as the latter work is accessing codec device which could be already removed. Here add the cancellation of jack-detecting work before codecs are actually removed to avoid the race and fix the issue. Bug: https://github.com/thesofproject/linux/issues/1067 Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190807145030.26117-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-07ASoC: SOF: Intel: hda: Initialize HDA controller after i915 initRanjani Sridharan
On some platforms, sound card registration fails when a HDMI monitor is not connected. This is caused by a recent commit that switched the order in which the HDA controller and the i915 are initialized. Initializing the i915 before initializing the HDA controller fixes the problem. Fixes: be1b577d01787c ("ASoC: SOF: Intel: hda: fix the hda init chip" Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190806221958.19180-1-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-07ASoC: rsnd: don't call clk_get_rate() under atomic contextKuninori Morimoto
ADG is using clk_get_rate() under atomic context, thus, we might have scheduling issue. To avoid this issue, we need to get/keep clk rate under non atomic context. We need to handle ADG as special device at Renesas Sound driver. From SW point of view, we want to impletent it as rsnd_mod_ops :: prepare, but it makes code just complicate. To avoid complicated code/patch, this patch adds new clk_rate[] array, and keep clk IN rate when rsnd_adg_clk_enable() was called. Reported-by: Leon Kong <Leon.KONG@cn.bosch.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Leon Kong <Leon.KONG@cn.bosch.com> Link: https://lore.kernel.org/r/87v9vb0xkp.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-06ASoC: max98373: Remove executable bitsMark Brown
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-02ASoC: amd: acp3x: use dma address for acp3x dma driverVijendar Mukunda
We shouldn't assume CPU physical address we get from page_to_phys() is same as DMA address we get from dma_alloc_coherent(). On x86_64, we won't run into any problem with the assumption when dma_ops is nommu_dma_ops. However, DMA address is IOVA when IOMMU is enabled. And it's most likely different from CPU physical address when AMD IOMMU is not in passthrough mode. This patch fixes page faults when IOMMU is enabled. Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com> Link: https://lore.kernel.org/r/1564753899-17124-2-git-send-email-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-02ASoC: amd: acp3x: use dma_ops of parent device for acp3x dma driverVijendar Mukunda
AMD platform device acp3x_rv_i2s created by parent PCI device driver. Pass struct device of the parent to snd_pcm_lib_preallocate_pages() so dma_alloc_coherent() can use correct dma_ops. Otherwise, it will use default dma_ops which is nommu_dma_ops on x86_64 even when IOMMU is enabled and set to non passthrough mode. Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com> Link: https://lore.kernel.org/r/1564753899-17124-1-git-send-email-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-31ASoC: max98373: add 88200 and 96000 sampling rate supportfengchunguo
88200 and 96000 sampling rate was not enabled on driver, so can't be played. The error information: max98373 3-0031：rate 96000 not supported max98373 3-0031：ASoC: can't set max98373-aif1 hw params: -22 Signed-off-by: fengchunguo <chunguo.feng@amlogic.com> Link: https://lore.kernel.org/r/20190731074156.5620-1-chunguo.feng@amlogic.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-31ASoC: sun4i-i2s: Incorrect SR and WSS computationMarcus Cooper
The A64 audio codec uses the original I2S block but the SR and WSS computation currently assigned is for the newer block. Fixes: 619c15f7fac9 (ASoC: sun4i-i2s: Change SR and WSS computation) Signed-off-by: Marcus Cooper <codekipper@gmail.com> Link: https://lore.kernel.org/r/20190729152130.27955-1-codekipper@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-31MAINTAINERS: Update Intel ASoC drivers maintainersCezary Rojewski
Adding myself to Intel ASoC drivers maintainers list. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190726181517.27655-1-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26ASoC: ti: davinci-mcasp: Correct slot_width posed constraintPeter Ujfalusi
The slot_width is a property for the bus while the constraint for SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format. Applying slot_width constraint to sample_bits works most of the time, but it will blacklist valid formats in some cases. With slot_width 24 we can support S24_3LE and S24_LE formats as they both look the same on the bus, but a a 24 constraint on sample_bits would not allow S24_LE as it is stored in 32bits in memory. Implement a simple hw_rule function to allow all formats which require less or equal number of bits on the bus as slot_width (if configured). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190726064244.3762-2-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26ASoC: rockchip: Fix mono captureCheng-Yi Chiang
This reverts commit db51707b9c9aeedd310ebce60f15d5bb006567e0. Revert "ASoC: rockchip: i2s: Support mono capture" Previous discussion in https://patchwork.kernel.org/patch/10147153/ explains the issue of the patch. While device is configured as 1-ch, hardware is still generating a 2-ch stream. When user space reads the data and assumes it is a 1-ch stream, the rate will be slower by 2x. Revert the change so 1-ch is not supported. User space can selectively take one channel data out of two channel if 1-ch is preferred. Currently, both channels record identical data. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20190726044202.26866-1-cychiang@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26ASoC: Intel: Fix some acpi vs apci typo in somme commentsChristophe JAILLET
Fix some typo to have the filaname given in a comment match the real name of the file. Some 'acpi' have erroneously been written 'apci' Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20190725053523.16542-1-christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26ASoC: ti: davinci-mcasp: Fix clk PDIR handling for i2s master modePeter Ujfalusi
When running McASP as master capture alone will not record any audio unless a parallel playback stream is running. As soon as the playback stops the captured data is going to be silent again. In McASP master mode we need to set the PDIR for the clock pins and fix the mcasp_set_axr_pdir() to skip the bits in the PDIR registers above AMUTE. This went unnoticed as most of the boards uses McASP as slave and neither of these issues are visible (audible) in those setups. Fixes: ca3d9433349e ("ASoC: davinci-mcasp: Update PDIR (pin direction) register handling") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190725083423.7321-1-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-24ASoC: Fail card instantiation if DAI format setup failsRicard Wanderlof
If the DAI format setup fails, there is no valid communication format between CPU and CODEC, so fail card instantiation, rather than continue with a card that will most likely not function properly. Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Link: https://lore.kernel.org/r/alpine.DEB.2.20.1907241132350.6338@lnxricardw1.se.axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-23ASoC: SOF: Intel: hda: remove misleading error trace from IRQ threadKai Vehmanen
Downgrade "nothing to do in IRQ thread" message from error to a debug message in the IPC interrupt handler thread. The spurious wake-up can happen if a HDA stream interrupt is raised while the IPC interrupt thread is running. IPC functionality is not impacted by this condition, so debug is a more appropriate trace level. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190722141402.7194-21-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-23ASoC: qcom: apq8016_sbc: Fix oops with multiple DAI linksStephan Gerhold
apq8016_sbc_parse_of() sets up multiple DAI links, depending on the number of nodes in the device tree. However, at the moment CPU and platform components are only allocated for the first link. This causes an oops when more than one link is defined: Internal error: Oops: 96000044 [#1] SMP CPU: 0 PID: 1015 Comm: kworker/0:2 Not tainted 5.3.0-rc1 #4 Call trace: apq8016_sbc_platform_probe+0x1a8/0x3f0 platform_drv_probe+0x50/0xa0 ... Move the allocation inside the loop to ensure that each link is properly initialized. Fixes: 98b232ca9e0e ("ASoC: qcom: apq8016_sbc: use modern dai_link style") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20190722130352.95874-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: dapm: fix a memory leak bugWenwen Wang
In snd_soc_dapm_new_control_unlocked(), a kernel buffer is allocated in dapm_cnew_widget() to hold the new dapm widget. Then, different actions are taken according to the id of the widget, i.e., 'w->id'. If any failure occurs during this process, snd_soc_dapm_new_control_unlocked() should be terminated by going to the 'request_failed' label. However, the allocated kernel buffer is not freed on this code path, leading to a memory leak bug. To fix the above issue, free the buffer before returning from snd_soc_dapm_new_control_unlocked() through the 'request_failed' label. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Link: https://lore.kernel.org/r/1563803864-2809-1-git-send-email-wang6495@umn.edu Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: SOF: use __u32 instead of uint32_t in uapi headersMasahiro Yamada
When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to make sure they can be included from user-space. Currently, header.h and fw.h are excluded from the test coverage. To make them join the compile-test, we need to fix the build errors attached below. For a case like this, we decided to use __u{8,16,32,64} variable types in this discussion: https://lkml.org/lkml/2019/6/5/18 Build log: CC usr/include/sound/sof/header.h.s CC usr/include/sound/sof/fw.h.s In file included from <command-line>:32:0: ./usr/include/sound/sof/header.h:19:2: error: unknown type name ‘uint32_t’ uint32_t magic; /**< 'S', 'O', 'F', '\0' */ ^~~~~~~~ ./usr/include/sound/sof/header.h:20:2: error: unknown type name ‘uint32_t’ uint32_t type; /**< component specific type */ ^~~~~~~~ ./usr/include/sound/sof/header.h:21:2: error: unknown type name ‘uint32_t’ uint32_t size; /**< size in bytes of data excl. this struct */ ^~~~~~~~ ./usr/include/sound/sof/header.h:22:2: error: unknown type name ‘uint32_t’ uint32_t abi; /**< SOF ABI version */ ^~~~~~~~ ./usr/include/sound/sof/header.h:23:2: error: unknown type name ‘uint32_t’ uint32_t reserved[4]; /**< reserved for future use */ ^~~~~~~~ ./usr/include/sound/sof/header.h:24:2: error: unknown type name ‘uint32_t’ uint32_t data[0]; /**< Component data - opaque to core */ ^~~~~~~~ In file included from <command-line>:32:0: ./usr/include/sound/sof/fw.h:49:2: error: unknown type name ‘uint32_t’ uint32_t size; /* bytes minus this header */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:50:2: error: unknown type name ‘uint32_t’ uint32_t offset; /* offset from base */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:64:2: error: unknown type name ‘uint32_t’ uint32_t size; /* bytes minus this header */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:65:2: error: unknown type name ‘uint32_t’ uint32_t num_blocks; /* number of blocks */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:73:2: error: unknown type name ‘uint32_t’ uint32_t file_size; /* size of file minus this header */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:74:2: error: unknown type name ‘uint32_t’ uint32_t num_modules; /* number of modules */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:75:2: error: unknown type name ‘uint32_t’ uint32_t abi; /* version of header format */ ^~~~~~~~ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lore.kernel.org/r/20190721142308.30306-1-yamada.masahiro@socionext.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22SoC: rockchip: rockchip_max98090: Enable MICBIAS for headset keypress detectionEnric Balletbo i Serra
The TS3A227E says that the headset keypress detection needs the MICBIAS power in order to report the key events to ensure proper operation The headset keypress detection needs the MICBIAS power in order to report the key events all the time as long as MIC is present. So MICBIAS pin is forced on when a MICROPHONE is detected. On Veyron Minnie I observed that if the MICBIAS power is not present and the key press detection is activated (just because it is enabled when you insert a headset), it randomly reports a keypress on insert. E.g. (KEY_PLAYPAUSE) Event: (SW_HEADPHONE_INSERT), value 1 Event: (SW_MICROPHONE_INSERT), value 1 Event: -------------- SYN_REPORT ------------ Event: (KEY_PLAYPAUSE), value 1 Userspace thinks that KEY_PLAYPAUSE is pressed and produces the annoying effect that the media player starts a play/pause loop. Note that, although most of the time the key reported is the one associated with BTN_0, not always this is true. On my tests I also saw different keys reported Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20190719173929.24065-1-enric.balletbo@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: cs42xx8: Fix MFREQ selection issue for async modeShengjiu Wang
When sample rate of TX is different with sample rate of RX in async mode, the MFreq selection will be wrong. For example, sysclk = 24.576MHz, TX rate = 96000Hz, RX rate = 48000Hz. Then ratio of TX = 256, ratio of RX = 512, For MFreq is shared by TX and RX instance, the correct value of MFreq is 2 for both TX and RX. But original method will cause MFreq = 0 for TX, MFreq = 2 for RX. If TX is started after RX, RX will be impacted, RX work abnormal with MFreq = 0. This patch is to select proper MFreq value according to TX rate and RX rate. Fixes: 0c516b4ff85c ("ASoC: cs42xx8: Add codec driver support for CS42448/CS42888") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/20190716094547.46787-1-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 15:13:05 +0000