Age | Commit message (Collapse) | Author |
|
Some special-purpose registers that were present and accessible
by guests on POWER8 no longer exist on POWER9, so this adds
feature sections to ensure that we don't try to context-switch
them when going into or out of a guest on POWER9. These are
all relatively obscure, rarely-used registers, but we had to
context-switch them on POWER8 to avoid creating a covert channel.
They are: SPMC1, SPMC2, MMCRS, CSIGR, TACR, TCSCR, and ACOP.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
On POWER9, the SDR1 register (hashed page table base address) is no
longer used, and instead the hardware reads the HPT base address
and size from the partition table. The partition table entry also
contains the bits that specify the page size for the VRMA mapping,
which were previously in the LPCR. The VPM0 bit of the LPCR is
now reserved; the processor now always uses the VRMA (virtual
real-mode area) mechanism for guest real-mode accesses in HPT mode,
and the RMO (real-mode offset) mechanism has been dropped.
When entering or exiting the guest, we now only have to set the
LPIDR (logical partition ID register), not the SDR1 register.
There is also no requirement now to transition via a reserved
LPID value.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This adapts the KVM-HV hashed page table (HPT) code to read and write
HPT entries in the new format defined in Power ISA v3.00 on POWER9
machines. The new format moves the B (segment size) field from the
first doubleword to the second, and trims some bits from the AVA
(abbreviated virtual address) and ARPN (abbreviated real page number)
fields. As far as possible, the conversion is done when reading or
writing the HPT entries, and the rest of the code continues to use
the old format.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This merges in the ppc-kvm topic branch to get changes to
arch/powerpc code that are necessary for adding POWER9 KVM support.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Define and set the POWER9 HFSCR doorbell bit so that guests can use
msgsndp.
ISA 3.0 calls this MSGP, so name it accordingly in the code.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
ISA 3.0 defines a new PECE (Power-saving mode Exit Cause Enable) field
in the LPCR (Logical Partitioning Control Register), called
LPCR_PECE_HVEE (Hypervisor Virtualization Exit Enable).
KVM code will need to know about this bit, so add a definition for it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
ISA 3.00 adds the logical PVR value 0x0f000005, so add a definition for
this.
Define PCR_ARCH_207 to reflect ISA 2.07 compatibility mode in the processor
compatibility register (PCR).
[paulus@ozlabs.org - moved dummy PCR_ARCH_300 value into next patch]
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This defines real-mode versions of opal_int_get_xirr(), opal_int_eoi()
and opal_int_set_mfrr(), for use by KVM real-mode code.
It also exports opal_int_set_mfrr() so that the modular part of KVM
can use it to send IPIs.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
POWER9 requires the host to set up a partition table, which is a
table in memory indexed by logical partition ID (LPID) which
contains the pointers to page tables and process tables for the
host and each guest.
This factors out the initialization of the partition table into
a single function. This code was previously duplicated between
hash_utils_64.c and pgtable-radix.c.
This provides a function for setting a partition table entry,
which is used in early MMU initialization, and will be used by
KVM whenever a guest is created. This function includes a tlbie
instruction which will flush all TLB entries for the LPID and
all caches of the partition table entry for the LPID, across the
system.
This also moves a call to memblock_set_current_limit(), which was
in radix_init_partition_table(), but has nothing to do with the
partition table. By analogy with the similar code for hash, the
call gets moved to near the end of radix__early_init_mmu(). It
now gets called when running as a guest, whereas previously it
would only be called if the kernel is running as the host.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
These definitions will be needed by KVM.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Drop duplicate header asm/iommu.h from book3s_64_vio_hv.c.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
The hashed page table MMU in POWER processors can update the R
(reference) and C (change) bits in a HPTE at any time until the
HPTE has been invalidated and the TLB invalidation sequence has
completed. In kvmppc_h_protect, which implements the H_PROTECT
hypercall, we read the HPTE, modify the second doubleword,
invalidate the HPTE in memory, do the TLB invalidation sequence,
and then write the modified value of the second doubleword back
to memory. In doing so we could overwrite an R/C bit update done
by hardware between when we read the HPTE and when the TLB
invalidation completed. To fix this we re-read the second
doubleword after the TLB invalidation and OR in the (possibly)
new values of R and C. We can use an OR since hardware only ever
sets R and C, never clears them.
This race was found by code inspection. In principle this bug could
cause occasional guest memory corruption under host memory pressure.
Fixes: a8606e20e41a ("KVM: PPC: Handle some PAPR hcalls in the kernel", 2011-06-29)
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
When switching from/to a guest that has a transaction in progress,
we need to save/restore the checkpointed register state. Although
XER is part of the CPU state that gets checkpointed, the code that
does this saving and restoring doesn't save/restore XER.
This fixes it by saving and restoring the XER. To allow userspace
to read/write the checkpointed XER value, we also add a new ONE_REG
specifier.
The visible effect of this bug is that the guest may see its XER
value being corrupted when it uses transactions.
Fixes: e4e38121507a ("KVM: PPC: Book3S HV: Add transactional memory support")
Fixes: 0a8eccefcb34 ("KVM: PPC: Book3S HV: Add missing code for transaction reclaim on guest exit")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This keeps a per vcpu cache for recently page faulted MMIO entries.
On a page fault, if the entry exists in the cache, we can avoid some
time-consuming paths, for example, looking up HPT, locking HPTE twice
and searching mmio gfn from memslots, then directly call
kvmppc_hv_emulate_mmio().
In current implenment, we limit the size of cache to four. We think
it's enough to cover the high-frequency MMIO HPTEs in most case.
For example, considering the case of using virtio device, for virtio
legacy devices, one HPTE could handle notifications from up to
1024 (64K page / 64 byte Port IO register) devices, so one cache entry
is enough; for virtio modern devices, we always need one HPTE to handle
notification for each device because modern device would use a 8M MMIO
register to notify host instead of Port IO register, typically the
system's configuration should not exceed four virtio devices per
vcpu, four cache entry is also enough in this case. Of course, if needed,
we could also modify the macro to a module parameter in the future.
Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Currently we mark a HPTE for emulated MMIO with HPTE_V_ABSENT bit
set as well as key 0x1f. However, those HPTEs may be conflicted with
the HPTE for real guest RAM page HPTE with key 0x1f when the page
get paged out.
This patch clears the key field of HPTE when the page is paged out,
then recover it when HPTE is re-established.
Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Using list_move_tail() instead of list_del() + list_add_tail().
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
A bunch of KVM functions are only called from assembler.
Give them prototypes in asm-prototypes.h
This reduces sparse warnings.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Squash a couple of sparse warnings by making things static.
Build tested.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into kvm/next
Topic branch for AVX512_4VNNIW and AVX512_4FMAPS support in KVM.
|
|
Sparse populated CPUID leafs are collected in a software provided leaf to
avoid bloat of the x86_capability array, but there is no way to rebuild the
real leafs (e.g. for KVM CPUID enumeration) other than rereading the CPUID
leaf from the CPU. While this is possible it is problematic as it does not
take software disabled features into account. If a feature is disabled on
the host it should not be exposed to a guest either.
Add get_scattered_cpuid_leaf() which rebuilds the leaf from the scattered
cpuid table information and the active CPU features.
[ tglx: Rewrote changelog ]
Signed-off-by: He Chen <he.chen@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Luwei Kang <luwei.kang@intel.com>
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Piotr Luc <Piotr.Luc@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/r/1478856336-9388-3-git-send-email-he.chen@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
cpuid_regs is defined multiple times as structure and enum. Rename the enum
and move all of it to processor.h so we don't end up with more instances.
Rename the misnomed register enumeration from CR_* to the obvious CPUID_*.
[ tglx: Rewrote changelog ]
Signed-off-by: He Chen <he.chen@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@alien8.de>
Cc: Luwei Kang <luwei.kang@intel.com>
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Piotr Luc <Piotr.Luc@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/r/1478856336-9388-2-git-send-email-he.chen@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This changes the way that we support the new ISA v3.00 HPTE format.
Instead of adapting everything that uses HPTE values to handle either
the old format or the new format, depending on which CPU we are on,
we now convert explicitly between old and new formats if necessary
in the low-level routines that actually access HPTEs in memory.
This limits the amount of code that needs to know about the new
format and makes the conversions explicit. This is OK because the
old format contains all the information that is in the new format.
This also fixes operation under a hypervisor, because the H_ENTER
hypercall (and other hypercalls that deal with HPTEs) will continue
to require the HPTE value to be supplied in the old format. At
present the kernel will not boot in HPT mode on POWER9 under a
hypervisor.
This fixes and partially reverts commit 50de596de8be
("powerpc/mm/hash: Add support for Power9 Hash", 2016-04-29).
Fixes: 50de596de8be ("powerpc/mm/hash: Add support for Power9 Hash")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM fixes. There are a couple pending x86 patches but they'll have to
wait for next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs
KVM: arm/arm64: vgic: Prevent access to invalid SPIs
arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU
|
|
Merge media fixes from Mauro Carvalho Chehab:
"This contains two patches fixing problems with my patch series meant
to make USB drivers to work again after the DMA on stack changes.
The last patch on this series is actually not related to DMA on stack.
It solves a longstanding bug affecting module unload, causing
module_put() to be called twice. It was reported by the user who
reported and tested the issues with the gp8psk driver with the DMA
fixup patches. As we're late at -rc cycle, maybe you prefer to not
apply it right now. If this is the case, I'll add to the pile of
patches for 4.10.
Exceptionally this time, I'm sending the patches via e-mail, because
I'm on another trip, and won't be able to use the usual procedure
until Monday. Also, it is only three patches, and you followed already
the discussions about the first one"
* emailed patches from Mauro Carvalho Chehab <mchehab@osg.samsung.com>:
gp8psk: Fix DVB frontend attach
gp8psk: fix gp8psk_usb_in_op() logic
dvb-usb: move data_mutex to struct dvb_usb_device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are three small driver fixes for some reported issues for
4.9-rc5.
One for the hyper-v subsystem, fixing up a naming issue that showed up
in 4.9-rc1, one mei driver fix, and one fix for parallel ports,
resolving a reported regression.
All have been in linux-next with no reported issues"
* tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
ppdev: fix double-free of pp->pdev->name
vmbus: make sysfs names consistent with PCI
mei: bus: fix received data size check in NFC fixup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver core fixes for 4.9-rc5.
The first resolves an issue with some drivers not liking to be unbound
and bound again (if CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled), which
solves some reported problems with graphics and storage drivers. The
other resolves a smatch error with the 4.9-rc1 driver core changes
around this feature.
Both have been in linux-next with no reported issues"
* tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: fix smatch warning on dev->bus check
driver core: skip removal test for non-removable drivers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Grek KH:
"Here are a few small staging and iio driver fixes for reported issues.
The last one was cherry-picked from my -next branch to resolve a build
warning that Arnd fixed, in his quest to be able to turn
-Wmaybe-uninitialized back on again. That patch, and all of the
others, have been in linux-next for a while with no reported issues"
* tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: maxim_thermocouple: detect invalid storage size in read()
staging: nvec: remove managed resource from PS2 driver
Revert "staging: nvec: ps2: change serio type to passthrough"
drivers: staging: nvec: remove bogus reset command for PS/2 interface
staging: greybus: arche-platform: fix device reference leak
staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value
staging: sm750fb: Fix bugs introduced by early commits
iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation.
iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
iio: st_sensors: fix scale configuration for h3lis331dl
staging: iio: ad5933: avoid uninitialized variable in error case
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY fixes from Greg KH:
"Here are a number of small USB and PHY driver fixes for 4.9-rc5
Nothing major, just small fixes for reported issues, all of these have
been in linux-next for a while with no reported issues"
* tag 'usb-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: cdc-acm: fix TIOCMIWAIT
cdc-acm: fix uninitialized variable
drivers/usb: Skip auto handoff for TI and RENESAS usb controllers
usb: musb: remove duplicated actions
usb: musb: da8xx: Don't print phy error on -EPROBE_DEFER
phy: sun4i: check PMU presence when poking unknown bit of pmu
phy-rockchip-pcie: remove deassert of phy_rst from exit callback
phy: da8xx-usb: rename the ohci device to ohci-da8xx
phy: Add reset callback for not generic phy
uwb: fix device reference leaks
usb: gadget: u_ether: remove interrupt throttling
usb: dwc3: st: add missing <linux/pinctrl/consumer.h> include
usb: dwc3: Fix error handling for core init
|
|
Pull more block fixes from Jens Axboe:
"Since I mistakenly left out the lightnvm regression fix yesterday and
the aoeblk seems adequately tested at this point, might as well send
out another pull to make -rc5"
* 'for-linus' of git://git.kernel.dk/linux-block:
aoe: fix crash in page count manipulation
lightnvm: invalid offset calculation for lba_shift
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The megaraid_sas patch in here fixes a major regression in the last
fix set that made all megaraid_sas cards unusable. It turns out no-one
had actually tested such an "obvious" fix, sigh. The fix for the fix
has been tested ...
The next most serious is the vmw_pvscsi abort problem which basically
means that aborts don't work on the vmware paravirt devices and error
handling always escalates to reset.
The rest are an assortment of missed reference counting in certain
paths and corner case bugs that show up on some architectures"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression
scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove
scsi: qla2xxx: do not queue commands when unloading
scsi: libcxgbi: fix incorrect DDP resource cleanup
scsi: qla2xxx: Fix scsi scan hang triggered if adapter fails during init
scsi: scsi_dh_alua: Fix a reference counting bug
scsi: vmw_pvscsi: return SUCCESS for successful command aborts
scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk
scsi: scsi_dh_alua: fix missing kref_put() in alua_rtpg_work()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"The typical collection of minor bug fixes in clk drivers. We don't
have anything in the core framework here, just driver fixes.
There's a boot fix for Samsung devices and a safety measure for qoriq
to prevent CPUs from running too fast. There's also a fix for i.MX6Q
to properly handle audio clock rates. We also have some "that's
obviously wrong" fixes like bad NULL pointer checks in the MPP driver
and a poor usage of __pa in the xgene clk driver that are fixed here"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mmp: pxa910: fix return value check in pxa910_clk_init()
clk: mmp: pxa168: fix return value check in pxa168_clk_init()
clk: mmp: mmp2: fix return value check in mmp2_clk_init()
clk: qoriq: Don't allow CPU clocks higher than starting value
clk: imx: fix integer overflow in AV PLL round rate
clk: xgene: Don't call __pa on ioremaped address
clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT
clk: rockchip: don't return NULL when failing to register ddrclk branch
|
|
The DVB binding schema at the DVB core assumes that the frontend is a
separate driver. Faling to do that causes OOPS when the module is
removed, as it tries to do a symbol_put_addr on an internal symbol,
causing craches like:
WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70
Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core]
CPU: 1 PID: 28102 Comm: rmmod Tainted: P WC O 4.8.4-build.1 #1
Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009
Call Trace:
dump_stack+0x44/0x64
__warn+0xfa/0x120
module_put+0x57/0x70
module_put+0x57/0x70
warn_slowpath_null+0x23/0x30
module_put+0x57/0x70
gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk]
symbol_put_addr+0x27/0x50
dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]
From Derek's tests:
"Attach bug is fixed, tuning works, module unloads without
crashing. Everything seems ok!"
Reported-by: Derek <user.vdr@gmail.com>
Tested-by: Derek <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") fixed the
usage of DMA on stack, but the memcpy was wrong for gp8psk_usb_in_op().
Fix it.
From Derek's email:
"Fix confirmed using 2 different Skywalker models with
HD mpeg4, SD mpeg2."
Suggested-by: Johannes Stezenbach <js@linuxtv.org>
Fixes: bc29131ecb10 ("[media] gp8psk: don't do DMA on stack")
Tested-by: Derek <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The data_mutex is initialized too late, as it is needed for
each device driver's power control, causing an OOPS:
dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 PGD 0
Oops: 0002 [#1] SMP
Modules linked in: dvb_usb_cinergyT2(+) dvb_usb
CPU: 0 PID: 2029 Comm: modprobe Not tainted 4.9.0-rc4-dvbmod #24
Hardware name: FUJITSU LIFEBOOK A544/FJNBB35 , BIOS Version 1.17 05/09/2014
task: ffff88020e943840 task.stack: ffff8801f36ec000
RIP: 0010:[<ffffffff846617af>] [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100
RSP: 0018:ffff8801f36efb10 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff88021509bdc8 RCX: 00000000c0000100
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88021509bdcc
RBP: ffff8801f36efb58 R08: ffff88021f216320 R09: 0000000000100000
R10: ffff88021f216320 R11: 00000023fee6c5a1 R12: ffff88020e943840
R13: ffff88021509bdcc R14: 00000000ffffffff R15: ffff88021509bdd0
FS: 00007f21adb86740(0000) GS:ffff88021f200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000215bce000 CR4: 00000000001406f0
Call Trace:
mutex_lock+0x16/0x25
cinergyt2_power_ctrl+0x1f/0x60 [dvb_usb_cinergyT2]
dvb_usb_device_init+0x21e/0x5d0 [dvb_usb]
cinergyt2_usb_probe+0x21/0x50 [dvb_usb_cinergyT2]
usb_probe_interface+0xf3/0x2a0
driver_probe_device+0x208/0x2b0
__driver_attach+0x87/0x90
driver_probe_device+0x2b0/0x2b0
bus_for_each_dev+0x52/0x80
bus_add_driver+0x1a3/0x220
driver_register+0x56/0xd0
usb_register_driver+0x77/0x130
do_one_initcall+0x46/0x180
free_vmap_area_noflush+0x38/0x70
kmem_cache_alloc+0x84/0xc0
do_init_module+0x50/0x1be
load_module+0x1d8b/0x2100
find_symbol_in_section+0xa0/0xa0
SyS_finit_module+0x89/0x90
entry_SYSCALL_64_fastpath+0x13/0x94
Code: e8 a7 1d 00 00 8b 03 83 f8 01 0f 84 97 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 4c 89 3c 24 41 be ff ff ff ff 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 1a 49 c7 44 24 08 02 00 00 00 c6 43 RIP [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 RSP <ffff8801f36efb10>
CR2: 0000000000000000
So, move it to the struct dvb_usb_device and initialize it
before calling the driver's callbacks.
Reported-by: Jörg Otte <jrg.otte@gmail.com>
Tested-by: Jörg Otte <jrg.otte@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other
than 2 or 4 will result in undefined behavior:
drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read':
drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This probably cannot happen, but returning -EINVAL here is appropriate
and makes gcc happy and the code more robust.
Fixes: 231147ee77f3 ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
(cherry picked from commit 32cb7d27e65df9daa7cee8f1fdf7b259f214bee2)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
aoeblk contains some mysterious code, that wants to elevate the bio
vec page counts while it's under IO. That is not needed, it's
fragile, and it's causing kernel oopses for some.
Reported-by: Tested-by: Don Koch <kochd@us.ibm.com>
Tested-by: Tested-by: Don Koch <kochd@us.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The ns->lba_shift assumes its value to be the logarithmic of the
LA size. A previous patch duplicated the lba_shift calculation into
lightnvm. It prematurely also subtracted a 512byte shift, which commonly
is applied per-command. The 512byte shift being subtracted twice led to
data loss when restoring the logical to physical mapping table from
device and when issuing I/O commands using rrpc.
Fix offset by removing the 512byte shift subtraction when calculating
lba_shift.
Fixes: b0b4e09c1ae7 "lightnvm: control life of nvm_dev in driver"
Reported-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent regression in the 8250_dw serial driver introduced by
adding a quirk for the APM X-Gene SoC to it which uncovered an issue
related to the handling of built-in device properties in the core ACPI
device enumeration code (Heikki Krogerus)"
* tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / platform: Add support for build-in properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two bugs in error code paths in the PM core (system-wide
suspend of devices), a device reference leak in the boot-time suspend
test code and a cpupower utility regression from the 4.7 cycle.
Specifics:
- Prevent the PM core from attempting to suspend parent devices if
any of their children, whose suspend callbacks were invoked
asynchronously, have failed to suspend during the "late" and
"noirq" phases of system-wide suspend of devices (Brian Norris).
- Prevent the boot-time system suspend test code from leaking a
reference to the RTC device used by it (Johan Hovold).
- Fix cpupower to use the return value of one of its library
functions correctly and restore the correct behavior of it when
used for setting cpufreq tunables broken during the 4.7 development
cycle (Laura Abbott)"
* tag 'pm-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails
PM / sleep: fix device reference leak in test_suspend
cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- mmap handler for dma ops as generic handler no longer works for us
[Alexey]
- Fixes for EZChip platform [Noam]
- Fix RTC clocksource driver build issue
- ARC IRQ handling fixes [Yuriy]
- Revert a recent makefile change which doesn't go well with oldish
tools out in the wild
* tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination core
ARC: IRQ: Do not use hwirq as virq and vice versa
ARC: [plat-eznps] set default baud for early console
ARC: [plat-eznps] remove IPI clear from SMP operations
Revert "ARC: build: retire old toggles"
ARC: timer: rtc: implement read loop in "C" vs. inline asm
ARC: change return value of userspace cmpxchg assist syscall
arc: Implement arch-specific dma_map_ops.mmap
ARC: [SMP] avoid overriding present cpumask
ARC: Enable PERF_EVENTS in nSIM driven platforms
|
|
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Minor doc fix, a DMI match for ideapad and a fix to toshiba-wmi to
avoid loading on non-toshiba systems.
Documentation/ABI:
- ibm_rtl: The "What:" fields are incomplete
toshiba-wmi:
- Fix loading the driver on non Toshiba laptops
ideapad-laptop:
- Add another DMI entry for Yoga 900"
* tag 'platform-drivers-x86-v4.9-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
Documentation/ABI: ibm_rtl: The "What:" fields are incomplete
toshiba-wmi: Fix loading the driver on non Toshiba laptops
ideapad-laptop: Add another DMI entry for Yoga 900
|
|
Pull block fixes from Jens Axboe:
"Two small (really, one liners both of them!) fixes that should go into
this series:
- Request allocation error handling fix for nbd, from Christophe,
fixing a regression in this series.
- An oops fix for drbd. Not a regression in this series, but stable
material. From Richard"
* 'for-linus' of git://git.kernel.dk/linux-block:
drbd: Fix kernel_sendmsg() usage - potential NULL deref
nbd: Fix error handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Update MAINTAINERS for Intel VMD driver filename
- Update Rockchip rk3399 host bridge driver DTS and resets
- Fix ROM shadow problem that made some video device initialization
fail
* tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: VMD: Update filename to reflect move
arm64: dts: rockchip: add three new resets for rk3399 PCIe controller
PCI: rockchip: Add three new resets as required properties
PCI: Don't attempt to claim shadow copies of ROM
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"AMD, radeon, i915, imx, msm and udl fixes:
- amdgpu/radeon have a number of power management regressions and
fixes along with some better error checking
- imx has a single regression fix
- udl has a single kmalloc instead of stack for usb control msg fix
- msm has some fixes for modesetting bugs and regressions
- i915 has a one fix for a Sandybridge regression along with some
others for DP audio.
They all seem pretty okay at this stage, we've got one MST fix I know
going through process for i915, but I expect it'll be next week"
* tag 'drm-fixes-for-v4.9-rc5' of git://people.freedesktop.org/~airlied/linux: (30 commits)
drm/udl: make control msg static const. (v2)
drm/amd/powerplay: implement get_clock_by_type for iceland.
drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2)
drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland
drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk
drm/imx: disable planes before DC
drm/amd/powerplay: return false instead of -EINVAL
drm/amdgpu/powerplay/smu7: fix unintialized data usage
drm/amdgpu: fix crash in acp_hw_fini
drm/i915: Limit Valleyview and earlier to only using mappable scanout
drm/i915: Round tile chunks up for constructing partial VMAs
drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms
drm/i915/dp: BDW cdclk fix for DP audio
drm/i915/vlv: Prevent enabling hpd polling in late suspend
drm/i915: Respect alternate_ddc_pin for all DDI ports
drm/msm: Fix error handling crashes seen when VRAM allocation fails
drm/msm/mdp5: 8x16 actually has 8 mixer stages
drm/msm/mdp5: no scaling support on RGBn pipes for 8x16
drm/msm/mdp5: handle non-fullscreen base plane case
drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix mmc card initialization for hosts not supporting HW busy
detection
- Fix mmc_test for sending commands during non-blocking write
MMC host:
- mxs: Avoid using an uninitialized
- sdhci: Restore enhanced strobe setting during runtime resume
- sdhci: Fix a couple of reset related issues
- dw_mmc: Fix a reset controller issue"
* tag 'mmc-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mxs: Initialize the spinlock prior to using it
mmc: mmc: Use 500ms as the default generic CMD6 timeout
mmc: mmc_test: Fix "Commands during non-blocking write" tests
mmc: sdhci: Fix missing enhanced strobe setting during runtime resume
mmc: sdhci: Reset cmd and data circuits after tuning failure
mmc: sdhci: Fix unexpected data interrupt handling
mmc: sdhci: Fix CMD line reset interfering with ongoing data transfer
mmc: dw_mmc: add the "reset" as name of reset controller
Documentation: synopsys-dw-mshc: add binding for reset-names
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"All is about drivers, no core business going on.
- Fix a host of runtime problems with the Intel Cherryview driver:
suspend/resume needs to be marshalled properly, and strange effects
from BIOS interaction during suspend/resume need to be dealt with.
- A single bit was being set wrong in the Aspeed driver.
- Fix an iProc probe ordering fallout resulting from v4.9
refactorings for bus population.
- Do not specify a default trigger in the ST Micro cascaded GPIO IRQ
controller: the kernel will moan.
- Make IRQs optional altogether on the STM32 driver, it turns out not
all systems have them or want them.
- Fix a re-probe bug in the i.MX driver, it will eventually crash if
probed repeatedly, not good"
* tag 'pinctrl-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl-aspeed-g5: Never set SCU90[6]
pinctrl: cherryview: Prevent possible interrupt storm on resume
pinctrl: cherryview: Serialize register access in suspend/resume
pinctrl: imx: reset group index on probe
pinctrl: stm32: move gpio irqs binding to optional
pinctrl: stm32: remove dependency with interrupt controller
pinctrl: st: don't specify default interrupt trigger
pinctrl: iproc: Fix iProc and NSP GPIO support
|
|
* pm-tools-fixes:
cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set
* pm-sleep-fixes:
PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails
PM / sleep: fix device reference leak in test_suspend
|
|
* device-properties:
ACPI / platform: Add support for build-in properties
|
|
Merge fixes for -Wmaybe-uninitialized from Arnd Bergmann:
"It took a while for some patches to make it into mainline through
maintainer trees, but the 28-patch series is now reduced to 10, with
one tiny patch added at the end.
Aside from patches that are no longer required, I did these changes
compared to version 1:
- Dropped "iio: maxim_thermocouple: detect invalid storage size in
read()", which is currently in linux-next as commit 32cb7d27e65d.
This is the only remaining warning I see for a couple of corner
cases (kbuild bot reports it on blackfin, kernelci bot and arm-soc
bot both report it on arm64)
- Dropped "brcmfmac: avoid maybe-uninitialized warning in
brcmf_cfg80211_start_ap", which is currently in net/master merge
pending.
- Dropped two x86 patches, "x86: math-emu: possible uninitialized
variable use" and "x86: mark target address as output in 'insb'
asm" as they do not seem to trigger for a default build, and I got
no feedback on them. Both of these are ancient issues and seem
harmless, I will send them again to the x86 maintainers once the
rest is merged.
- Dropped "rbd: false-postive gcc-4.9 -Wmaybe-uninitialized" based on
feedback from Ilya Dryomov, who already has a different fix queued
up for v4.10. The kbuild bot reports this as a warning for xtensa.
- Replaced "crypto: aesni: avoid -Wmaybe-uninitialized warning" with
a simpler patch, this one always triggers but my first solution
would not be safe for linux-4.9 any more at this point. I'll follow
up with the larger patch as a cleanup for 4.10.
- Replaced "dib0700: fix nec repeat handling" with a better one,
contributed by Sean Young"
* -Wmaybe-uninitialized fixes:
Kbuild: enable -Wmaybe-uninitialized warnings by default
pcmcia: fix return value of soc_pcmcia_regulator_set
infiniband: shut up a maybe-uninitialized warning
crypto: aesni: shut up -Wmaybe-uninitialized warning
rc: print correct variable for z8f0811
dib0700: fix nec repeat handling
s390: pci: don't print uninitialized data for debugging
nios2: fix timer initcall return value
x86: apm: avoid uninitialized data
NFSv4.1: work around -Wmaybe-uninitialized warning
Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"
|