aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-04-13brcm80211: fmac: add frame header extension supportFranky Lin
A header extension is introduced in the received frame to provide extra space for dongle information. This won't affect current supported chipset since the data_offset is 0. But it's necessary for adding support for future chipset. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13brcm80211: fmac: register primary net device with device mac addressArend van Spriel
The primary net device was registered with a primary mac address and upon IFUP it was set to match the actual mac address from the device. This patch changes that and moves the brcmf_add_if() call to the common part of the driver. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13brcm80211: fmac: remove primary mac address handling from brcmf_net_attachArend van Spriel
The mac address for the primary interface was handled different from the other interfaces. The code has been restructured such that the brcmf_net_attach function treats the interfaces equal. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13brcm80211: fmac: make brcmf_net_attach() staticArend van Spriel
The function brcmf_net_attach() is only used within dhd_linux.c so it does not need to be extern. This patch makes the function static. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13mac80211: remove ieee80211_rx_bss_getMohammed Shafi Shajakhan
its not used where, while we directly obtain ieee80211_bss's pointer in ibss.c by calling cfg80211_get_bss Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13ath9k_htc: Add Panasonic N5HBZ0000055 device idSujith Manoharan
Reported-by: Ryan Roper <ryan.roper@gmail.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13mac80211: remove hw.conf.channel usage where possibleMichal Kazior
Removes hw.conf.channel usage from the following functions: * ieee80211_mandatory_rates * ieee80211_sta_get_rates * ieee80211_frame_duration * ieee80211_rts_duration * ieee80211_ctstoself_duration This is in preparation for multi-channel operation. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13ath9k_hw: Remove BTCOEX initvalsSujith Manoharan
The MAX_TXPWR table for BTCOEX is not needed for AR9462. Programming these values to the HW results in undesirable behavior - for example, large number of delimiter/data underruns are seen in AES-CCMP mode. Also, registers like AR_PCU_MISC_MODE2 return 0xdeadbeef after the BTCOEX_MAX power table is programmed to the HW, and frames being transmitted end up being looped back to the RX engine, an example being beacon frames in IBSS mode. Remove this table for now - this fixes CCMP performance and general IBSS usage. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13mac80211: fix an issue in ieee80211_tx_info count field managementLorenzo Bianconi
I noticed a possible issue in the status count field management of the ieee80211_tx_info data structure. In particular, when the AGGR processing is employed, status.rates[].count is set just for the first frame and not for others belonging to the same burst, leading to wrong statistic data in the mac80211 debug file system. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13cfg80211: Add channel information to NL80211_CMD_GET_INTERFACEPontus Fuchs
If the current channel is known, add frequency and channel type to NL80211_CMD_GET_INTERFACE. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13rt2800: zero registers of unused TX ringsJakub Kicinski
This is needed if we take over after drivers which use those. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13rt2800: initialize queues before giving up due to DMA errorJakub Kicinski
Don't immediately abort .start if DMA is busy before we initialize the queues. Some drivers do not deinitialize queues properly and we would fail to take over after them. This behaviour is consistent with legacy driver. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13rt2800: add disabling of DMA before loading firmwareJakub Kicinski
Legacy driver disables DMA before loading firmware. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13rt2800: introduce wpdma_disable functionJakub Kicinski
Introduce wpdma_disable function to simplify the code. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13mac80211: protect ->scanning by mutex in ieee80211_work_work()Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13mac80211: do not scan and monitor connection in parallelStanislaw Gruszka
Before we send probes in connection monitoring we check if scan is not pending. But we do that check without locking. Fix that and also do not start scan if connection monitoring is in progress. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13Merge branch 'for-linville' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2012-04-12iwlwifi: dynamically determine lib_opsJohannes Berg
Having the pointer to lib_ops in the config makes it impossible to split the driver into different modules. Determine the ops based on the device family enumeration to get rid of the direct pointer. Also move all the opmode specific code from the iwl-[1256]000.c files into a new file iwl-agn-devices.c so that the former only have configuration data now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12net/wireless: ipw2x00: add supported cipher suites to wiphy initializationStanislav Yakovlev
Driver doesn't report its supported cipher suites through cfg80211 interface. It still uses wext interface and probably will not work through nl80211, but will at least correctly advertise supported features. Bug was reported by Omar Siam. https://bugzilla.kernel.org/show_bug.cgi?id=43049 Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12prism54: replace open-coded ARRAY_SIZE with macroJim Cromie
Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12brcm80211: replace open-coded ARRAY_SIZE with the macroJim Cromie
Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Fix LLCP link timeout typoSamuel Ortiz
We were sending the LTO TLV as a version TLV instead of the actual link timeout one. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Add MIUX to the local LLCP general bytesSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: pn533 Rx chaining supportSamuel Ortiz
When buffers on the receiption path exceed 262 bytes, the pn533 uses a chaining mechanism where the initiator has to send NULL data frames to fetch the remaining frames. We do that from a workqueue context while holding the cmd lock. Once the MI bit is gone, we aggregate the queued received skbs. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Convert pn533 from tasklet to workqueuesSamuel Ortiz
There is no need for soft IRQ contexts, and workqueues are more flexible. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Call llcp_add_header properly when sending LLCP DM or DISCSamuel Ortiz
dsap and ssap were swapped when sending DN or DISC. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Fix LLCP TLV building routineSamuel Ortiz
The if logic could lead to zero length TLVs. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: No need to apply twice the modulo op to LLCP's recv_nSamuel Ortiz
recv_n is set properly when receiving an HDLC frame. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Dump LLCP framesSamuel Ortiz
At KERN_DEBUG level. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Add Core support to generate tag lost eventEric Lapuyade
Some HW/drivers get notifications when a tag moves out of the radio field. This notification is now forwarded to user space through netlink. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Changed target activated state logicEric Lapuyade
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Fix next target_idx type and rename for clarityEric Lapuyade
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: The core part should generate the target indexSamuel Ortiz
The target index can be used by userspace to uniquely identify a target and thus should be kept unique, per NFC adapter. Moreover, some protocols do not provide a logical index when discovering new targets, so we have to generate one for them. For NCI or pn533 to fetch their logical index, we added a logical_idx field to the target structure. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Add HCI documentationEric Lapuyade
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: SHDLC implementationEric Lapuyade
Most NFC HCI chipsets actually use a simplified HDLC link layer to carry HCI payloads. This implementation registers itself as an HCI device on behalf of the NFC driver. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: HCI supportEric Lapuyade
This is an implementation of ETSI TS 102 622 specification. Many NFC chipsets use HCI as the host <-> target protocol on top of a serial link like i2c. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Export target lost functionEric Lapuyade
NFC drivers will call this routine when they detect that a tag leaves the RF field. This will eventually lead to the corresponding netlink event to be sent. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Add a target lost netlink eventSamuel Ortiz
Some chips are capable of detecting when a tag is out of the field, so they could send a netlink event about it to userspace. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12ath9k: remove dead codeZefir Kurtisi
Clean up some orphaned code lines containing * unused variables (not referenced / write-only) * non-implemented function prototypes Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mac80211: fix the assignment of PREQ's MAC address for Proactive RANNChun-Yeow Yeoh
Record the RANN sender's address only for RANNs that meet the acceptance criteria (per sections 13.10.12.4.2). Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Reviewed-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: use asynchronous firmware loadingAmitkumar Karwar
Make use of request_firmware_nowait instead of request_firmware to load FW asynchronously. This fixes timeouts introduced with recent udev changes. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: add support for WPS2.0Avinash Patil
This patches enables setting association request and probe request IE for station interface. WPS exchange between WPS2.0 AP and mwifiex STA Enrollee/External Registrar completes successfully. Tested with wpa_supplicant 1.0 and 2.0 devel. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: display correct country information in debugfs "info"Amitkumar Karwar
Use "priv->country_code" string to display country information in debugfs command "info" instead of "adapter->region_code". "adapter->region_code" contains default region code got from FW while initialization, whereas "priv->country_code" is updated in reg_notifier handler whenever there is a change in regulatory domain. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: set default regulatory domainAmitkumar Karwar
Driver gets region code from FW during initialisation. This patch makes use of it for settting default regulatory domain using regulatory_hint() API. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: fix typo in RSSI_HIGH event handlingBing Zhao
This is a copy-n-paste error introduced in recent patch "mwifiex: add set_cqm_rssi_config handler support". Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: introduce device family enumJohannes Berg
This will later be used to dynamically bind the configuration data for DVM and MVM. For now, we can use it to get rid of the additional_nic_config() hook. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: create device configuration header fileJohannes Berg
The iwl-shared.h header file will be going away soon. There isn't much left in it that we keep, other than the device configuration declarations. Move those out now to a new iwl-config.h header. iwl-cfg.h seemed like a possible alternative but those declarations will later live in the PCIe transport code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: move eeprom into privJohannes Berg
The whole code around eeprom is distributed across whole bunch of different files, most of which belong to the to-be-DVM code. As a result, it is currently very hard to split out the EEPROM code to be generic. However, it is also quite unlikely that the current EEPROM code will be needed by the MVM code as that has different mechanisms to query the EEPROM (it does so through the uCode.) So, at least temporarily, move everything into priv. If it becomes necessary to use the code from MVM, we will have to split it out, but then it's also easier since we'll know what pieces we need. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: split force_reset debugfs fileJohannes Berg
Split the force_reset debugfs file into two different files: * "rf_reset" triggers a reset of the RF when written to and exposes statistics on RF resets when read * fw_restart triggers a firmware restart when written to and lives in the transport This cleans up all sources of firmware restart to originate within the transport layer and allows us to simplify some code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: remove ack_check module parameterJohannes Berg
This defaults to false, and we don't recommend to use it anywhere, so just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-08 01:44:33 +0000