| Age | Commit message (Collapse) | Author |
|---|
|
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-9-noralf@tronnes.org
|
|
Improve error reporting in drm_fb_helper_fbdev_setup() by printing the
error code. This is useful for drivers that choose to not fall over just
because fbdev doesen't work, but still wants clues to why it failed.
This way they don't have to provide an error message themselves.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-2-noralf@tronnes.org
|
|
After schedule() returns 0, we must do one last check of COND to
determine the reason for the wakeup with 0 jiffies remaining before
reporting the timeout -- otherwise we may lose the signal due to
scheduler delays.
References: https://bugs.freedesktop.org/show_bug.cgi?id=106690
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920200530.2836-2-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Both the .enable_signaling and .release of the null syncobj fence
can be replaced by the default callbacks for a small reduction in code
size. In particular the default callback for .release was changed in
commit e28bd101ae1b ("drm: rename null fence to stub fence in syncobj v2")
which neglected its RCU protection.
Fixes: e28bd101ae1b ("drm: rename null fence to stub fence in syncobj v2")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920200530.2836-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
All DRM_CLIENT capabilities are tied to KMS support, so returning
-EOPNOTSUPP when KMS is not supported.
v2: returning -EOPNOTSUPP(same value as posix ENOTSUP and available
in uapi) instead of -ENOTSUPP
v3: adding comments about the feature requirement about capabilities
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918174809.17123-1-jose.souza@intel.com
|
|
'vaddr_out' is malloced in _vkms_get_crc() and should be freed before
leaving from the error handling cases, otherwise it will cause memory
leak.
Fixes: db7f419c06d7 ("drm/vkms: Compute CRC with Cursor Plane")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1536976399-1295-1-git-send-email-weiyongjun1@huawei.com
|
|
Move udl maintenance into drm-misc tree. I've also signed up to be a
reviewer, but have kept it at Odd Fixes level of support.
Cc: Dave Airlie <airlied@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919204026.3217-1-sean@poorly.run
|
|
Planes without an alpha property, using __drm_atomic_helper_plane_reset
will have their plane state alpha initialised as zero, which represents
a transparent alpha.
If this value is then used for the plane, it may not be visible by
default, and thus doesn't represent a good initialisation state.
Update the default state->alpha value to DRM_BLEND_ALPHA_OPAQUE
unconditionally when the plane is reset.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919155700.10342-2-kieran.bingham+renesas@ideasonboard.com
|
|
for_each_available_child_of_node will get and put the node properly,
the following of_node_put will lead to the double put. So just
remove it.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1534472646-10368-1-git-send-email-zhongjiang@huawei.com
|
|
The N value was computed by kernel driver that based on synchronous clock
mode. But only specific N value (0x8000) would be acceptable for
LG LP140WF6-SPM1 eDP panel which is running at asynchronous clock mode.
With the other N value, Tcon will enter BITS mode and display black screen.
Add this panel into quirk database and give particular N value when
calculate M/N divider.
v2: no update
v3: add lost commit messages back for version 2
v4: send patch to both intel-gfx and dri-devel
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-4-git-send-email-shawn.c.lee@intel.com
|
|
Some DP dongles in particular seem to be fussy about too large
link M/N values. Set specific value for N divider can resolve
this issue per dongle vendor's comment. So configure N as
constant value (0x8000) to instead of reduce M/N formula when
specific DP dongle connected.
v2: add more comments for issue description and fix typo.
v3: add lost commit messages back for version 2
v4: send patch to both intel-gfx and dri-devel
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-3-git-send-email-shawn.c.lee@intel.com
|
|
DP quirk list just compare sink or branch device's OUI so far.
That means particular vendor's products will be applied specific
change. This change would confirm device_id the same or not.
Then driver can implement some changes for branch/sink device
that really need additional WA.
v2: use sizeof instead of hard coded '6'
v3: add lost commit messages back for version 2
v4: send patch to both intel-gfx and dri-devel
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-2-git-send-email-shawn.c.lee@intel.com
|
|
With virtio gpu ttm-pages being dma mapped, dma sync is needed when
swiotlb is used as bounce buffers, before TRANSFER_TO_HOST_2D/3D
commands are sent.
Signed-off-by: Jiandi An <jiandi.an@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180919070931.91168-1-jiandi.an@amd.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The R40 SoC has a HDMI PHY that is possible to mux two video PLLs.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180916043409.62374-4-icenowy@aosc.io
|
|
The Allwinner R40 HDMI PHY is currently the only one that seems to be
able to select between two PLL inputs.
Add a compatible string for it, and the pll-1 clock input definition.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180916043409.62374-3-icenowy@aosc.io
|
|
If the ioctl is not supported on a particular piece of HW/driver
combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily
distinguished from both the lack of the ioctl and from a regular invalid
parameter.
v2: Across all the kms ioctls we had a mixture of reporting EINVAL,
ENODEV and a few ENOTSUPP (most where EINVAL) for a failed
drm_core_check_feature(). Update everybody to report ENOTSUPP.
v3: ENOTSUPP is an internal errno! It's value (524) does not correspond
to a POSIX errno, the one we want is ENOTSUP. However,
uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says
"ENOTSUP and EOPNOTSUPP have the same value on Linux,
but according to POSIX.1 these error values should be
distinct."
so use EOPNOTSUPP as its equivalent.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
|
|
We accidentally forgot to set "ret" on this error path so it means we
return NULL instead of an error pointer. The caller checks for NULL and
changes it to an error pointer so it doesn't cause an issue at run time.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180914065615.GA12043@mwanda
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Disable atomic on a per-device basis instead of for all devices.
Made possible by the new device.driver_features thing.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Suggested-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913163147.27900-2-ville.syrjala@linux.intel.com
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently we're clearing DRIVER_ATOMIC in driver.driver_features
for older platforms. This will not work correctly should we ever
have a system with and old and new GPU in it. While that is not
possible currently let's make the code more correct and use
the per-device driver_features instead.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913131622.17690-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We wish to control certain driver_features flags on a per-device basis
while still sharing a single drm_driver instance across all the
devices. To that end introduce device.driver_features. By default
it will be set to ~0 to not impose any limits beyond
driver.driver_features. Drivers can then clear specific flags
in the per-device bitmask to limit the capabilities of the device.
An alternative approach would be to copy the driver_features from
the driver into the device in drm_dev_init(), however that would
require verifying that no driver is currently changing
driver.driver_features after drm_dev_init(). Hence the ~0 apporach
was easier.
Ideally we'd also make drm_driver const but there is plenty of code
left that wants to mutate it (eg. various vfunc assignments). We'll
need to fix all that up before we can make it const.
And while at it fix up the type of the feature flag passed to
drm_core_check_feature().
v2: Streamline the && vs. & (Chris)
s/int/u32/ in drm_core_check_feature() args
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913131622.17690-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
|
|
Since commit 4a878c03d562 ("drm: bridge: Detach bridge from encoder at
encoder cleanup time"), it is generally no longer correct to detach bridges
from encoders manually. Document that.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806061910.29914-3-peda@axentia.se
|
|
The Analogix DP bridge driver is pretty verbose, and outputs
things like
[ 619.414067] rockchip-dp ff970000.edp: Link Training Clock Recovery success
[ 619.429233] rockchip-dp ff970000.edp: Link Training success!
each time the display gets unblanked. While it is good to know
that the device is behaving correctly, users already know that
because they can see some video output.
Let's keep these messages for cases where we need to actually
debug the driver (we have dynamic debug to enable them at runtime
if need be), and let's keep the kernel quiet otherwise.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180805172857.2517-1-marc.zyngier@arm.com
|
|
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in
a link error, as we try to access a symbol from the sun8i_tcon_top.ko module:
ERROR: "sun8i_tcon_top_de_config" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined!
ERROR: "sun8i_tcon_top_set_hdmi_src" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined!
ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined!
This solves the problem by adding a silent symbol for the tcon_top module,
building it as a separate module in exactly the cases that we need it,
but in a way that it is reachable by the other modules.
Fixes: cf77d79b4e29 ("drm/sun4i: tcon: Add another way for matching mixers with tcon")
Fixes: 0305189afb32 ("drm/sun4i: tcon: Add support for R40 TCON")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Matt Hart <matthew.hart@linaro.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180911113325.11024-1-maxime.ripard@bootlin.com
|
|
Lots of code can be removed by relying on fb-helper:
- "struct drm_framebuffer" moves to fb_helper.fb.
- "struct drm_gem_object" moves to fb_helper.obj[0].
- "struct qxl_device" can be inferred as drm_fb_helper is embedded.
- qxl_user_framebuffer_create -> drm_gem_fb_create.
- qxl_user_framebuffer_destroy -> drm_gem_fb_destroy.
- qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow).
Remove unused code:
- qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend.
- Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size.
Misc notes:
- The dirty callback is preserved as it is necessary to trigger update
commands in the hw (the screen stays black otherwise).
- No idea when .create_handle in drm_framebuffer_funcs is used, but use
the same drm_gem_fb_create_handle to match drm_gem_fb_funcs.
- I don't know why qxl_fb_find_or_create_single used to check for an
existing framebuffer and removed that check to match other drivers.
- Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to
be dynamically allocated. Replace the existing defio config by
drm_fb_helper_defio_init to accomodate this.
Testing results: startx with fbdev, modesetting and qxl all seems to
work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously
fails but others are fine. QEMU -spice and QEMU -spice with vdagent and
multiple (resized) displays (via remote-viewer) also works.
unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a
use-after-free in qxl_check_idle via qxl_ttm_fini).
Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that
would result in further code reduction, improve error handling (like not
leaking shadow memory), but unfortunately QXL has no implementation for
qxl_gem_prime_vmap.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-13-kraxel@redhat.com
|
|
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-12-kraxel@redhat.com
|
|
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-11-kraxel@redhat.com
|
|
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-10-kraxel@redhat.com
|
|
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-9-kraxel@redhat.com
|
|
Create variable for the list length limit. Serves as documentation,
also allows to make it a module parameter if needed.
Also add a total size limit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-8-kraxel@redhat.com
|
|
udmabuf builds without it, but if userspace can not create memfd
handles in the first place it is rather pointless to include it,
except for test builds.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-7-kraxel@redhat.com
|
|
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-6-kraxel@redhat.com
|
|
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-5-kraxel@redhat.com
|
|
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-4-kraxel@redhat.com
|
|
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-3-kraxel@redhat.com
|
|
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-2-kraxel@redhat.com
|
|
Add an initial kerneldoc entry for vkms with a todo list.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
[danvet: Keep the todo.rst entry to point at the vkms docs instead.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907174136.GA2648@haneenDRM
|
|
Cursor support is not complete yet. Add module option 'enable_cursor'
to enable/disable cursor support which is used for testing currently.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/b47f44f518d3c9858f1469193f1136e0c490060b.1536210181.git.hamohammed.sa@gmail.com
|
|
This patch compute CRC for output frame with cursor and primary plane.
Blend cursor with primary plane and compute CRC on the resulted frame.
This currently passes cursor-size-change, and cursor-64x64-[onscreen,
offscreen, sliding, random, dpms, rapid-movement] from igt
kms_cursor_crc tests.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/b1749f5c90da5721a481f12740e2e370edb4a752.1536210181.git.hamohammed.sa@gmail.com
|
|
Add cursor plane support and update vkms_plane_atomic_check to enable
positioning cursor plane.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c69078820eacf3246fa77beb0c6227b692cc5e82.1536210181.git.hamohammed.sa@gmail.com
|
|
For buffer sharing, use dma-buf instead. We can't set smem_start to 0
unconditionally since that's used by the fbdev mmap default
implementation. And we have plenty of userspace which would like to
keep that working.
This might break legit userspace - if it does we need to look at a
case-by-cases basis how to handle that. Worst case I expect overrides
for only specific drivers, since anything remotely modern should be
using dma-buf/prime now (which is about 7 years old now for DRM
drivers).
This issue was uncovered because Noralf's rework to implement a
generic fb_probe also implements it's own fb_mmap callback. Which
means smem_start didn't have to be set anymore, which blew up some
blob in userspace rather badly.
Acked-by: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-4-daniel.vetter@ffwll.ch
|
|
DRM drivers really, really, really don't want random userspace to
share buffer behind it's back, bypassing the dma-buf buffer sharing
machanism. For that reason we've ruthlessly rejected any IOCTL
exposing the physical address of any graphics buffer.
Unfortunately fbdev comes with that built-in. We could just set
smem_start to 0, but that means we'd have to hand-roll our own fb_mmap
implementation. For good reasons many drivers do that, but
smem_start/length is still super convenient.
Hence instead just stop the leak in the ioctl, to keep fb mmap working
as-is. A second patch will set this flag for all drm drivers.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-3-daniel.vetter@ffwll.ch
|
|
It was only used by the panic support in fbcon, which is now gone.
Remove this now dead code too.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Meng Xu <mengxu.gatech@gmail.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: Mike Frysinger <vapier@chromium.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: David Lechner <david@lechnology.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-2-daniel.vetter@ffwll.ch
|
|
This was only added for the drm's fbdev emulation support, so that it
would try harder to show the Oops.
Unfortunately this never really worked reliably, and in practice ended
up pushing the real Oops off the screen due to plentyfull locking,
sleep-while-atomic and other issues. So we removed all that support
from the fbdev emulation a while back. Aside: We've also removed the
kgdb support, for similar reasons.
Since it's such a small patch I figured I don't split this up into the
usual 3-phase removal.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: David Lechner <david@lechnology.com>
Cc: nouveau@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-1-daniel.vetter@ffwll.ch
|
|
DRM_MODE_REFLECT_X and DRM_MODE_REFLECT_Y meaning seems a bit unclear
to me, so try to clarify that with a bit of ascii graphics.
Changes since v1:
- Move the ascii graphics in the kerneldoc where all plane
properties are already documented and make sure it's properly
rendered, suggestested by Daniel Vetter.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180910172946.18539-1-alexandru-cosmin.gheorghe@arm.com
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/drm_plane.c: In function 'drm_mode_getplane_res':
drivers/gpu/drm/drm_plane.c:475:26: warning:
variable 'config' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1536646814-186429-1-git-send-email-yuehaibing@huawei.com
|
|
Leaving the DRM driver enabled on reboot or kexec has the annoying
effect of leaving the display generating transactions whilst the
IOMMU has been shut down.
In turn, the IOMMU driver (which shares its interrupt line with
the VOP) starts warning either on shutdown or when entering the
secondary kernel in the kexec case (nothing is expected on that
front).
A cheap way of ensuring that things are nicely shut down is to
register a shutdown callback in the platform driver.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180805124807.18169-1-marc.zyngier@arm.com
Cc: stable@vger.kernel.org
|
|
Clarify the relation between drm_fb_helper_fbdev_setup/teardown. Clarify
requirements for the new generic fbdev emulation API and log some more
details in case the driver does something wrong. Fix related typos.
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-5-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The drm_get_pci_dev API is deprecated, replace it by drm_dev_register.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-4-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Currently unloading bochs_drm (after unbinding the vtconsole) results in
a warning about a leaked connector:
[drm:drm_mode_config_cleanup] *ERROR* connector Virtual-3 leaked!
While investigating a potential fix I noticed that a lot of open-coded
functionality is already implemented elsewhere, so start converting it:
bochs_fbdev_init -> drm_fb_helper_fbdev_setup: trivial (similar impl).
bochs_fbdev_fini -> drm_fb_helper_fbdev_teardown: requires unembedding
"struct drm_framebuffer" from "struct bochs_framebuffer".
Unembedding drm_framebuffer is made easy using drm_gem_fbdev_fb_create
which can replace bochs_fbdev_destroy and custom routines in bochs_mm.c.
For this to work, the GEM object is moved into "drm_framebuffer". After
that, "bochs_framebuffer" is no longer needed and therefore removed.
Remove the unused "size" and "initialized" fields from fb, the latter is
not necessary as drm_fb_helper_fbdev_teardown can be called even if
bochsfb_create fails. This theory was tested by returning early and
late (just before drm_gem_fbdev_fb_create). Both scenarios fail
gracefully although the latter seems to leak the object from
bochsfb_create_object (not a regression).
Guess on the reason for the encoder leak: drm_framebuffer_cleanup was
previously used, but did not destroy much. drm_fb_helper_fbdev_teardown
is now used and calls drm_framebuffer_remove which does a bit more work.
Tested with 'echo 0 > /sys/class/vtconsole/vtcon1/bind; rmmod bochs_drm'
and also with Xorg + fbdev (startx -> xterm). The latter triggered a
warning in ttm_bo_vm_open that existed before, see
https://lkml.kernel.org/r/1464000533-13140-4-git-send-email-mstaudt@suse.de
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-3-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
