aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-10ALSA: core, oxygen, virtuoso: add an enum control info helperClemens Ladisch
Introduce the helper function snd_ctl_enum_info() to fill out the elem_info fields for an enumerated control. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: virtuoso: add Xonar HDAV1.3 Slim supportClemens Ladisch
Add experimental support for the Asus Xonar HDAV1.3 Slim sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: oxygen: add Xonar DG supportClemens Ladisch
Add experimental support for the Asus Xonar DG sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: oxygen: add X-Meridian 2G supportClemens Ladisch
Add support for the AuzenTech X-Meridian 7.1 2G sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: oxygen: add more PCI IDsClemens Ladisch
Add PCI IDs for some unknown models. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: virtuoso: reduce MCLK in double rate modesClemens Ladisch
For the CSxxxx and AKxxxx DAC/ADC chips, the MCLK factor in double rate modes (64-96 kHz) can be reduced to 128x without reducing sound quality. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: oxygen: simplify model-specific MCLK handlingClemens Ladisch
Replace the get_i2s_mclk callback with tables of MCLK values. This simplifies the MCLK-handling code in both the framework and the model- specific drivers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: virtuoso: use headphone gain setting only on front DACClemens Ladisch
Do not apply the headphone gain offset to any but the front DAC. These DACs would not be used in headphone mode, so this saves a few register writes. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: virtuoso: handle DAC oversampling automaticallyClemens Ladisch
Remove the DAC Oversampling mixer control because this setting does not make much sense. For cards with the H6 daughterboard, 128x oversampling was disabled anyway because these high MCLK frequency would not be compatible with the connector cable. For cards without the H6 daughterboard, 128x gives a slightly higher output quality; there is no reason to reduce it to 64x except for saving power, but then these cards have not been designed to be power efficient anyway (the D2's blinkenlights cannot be disabled). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: virtuoso: use lower master clock with H6 daughterboardClemens Ladisch
Because of the unshielded connector cable, it is important to use as low a master clock frequency as possible with the H6. For double rate modes (64-96 kHz), the MCLK rate is unconditionally lowered from 512x to 256x because the higher rate would not improve anything. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: virtuoso: configure correct master clock frequency on the CS2000Clemens Ladisch
The clock output of the CS2000, which is used as master clock for the DACs, was using half the actual master clock frequency for some reason. Using the theoretically correct frequency seems also to work in practice. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: virtuoso: remove non-working controls on Essence ST DeluxeClemens Ladisch
On the Xonar Essence ST Deluxe, remove all mixer controls that would require I2C communication with the third DAC, which does not work because of an addressing conflict with the CS2000 chip. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: virtuoso: change PCM1796 format to I2SClemens Ladisch
Change the PCM format used for the PCM1796 from left-justified to I2S to ensure that the correct format is used even for the Essence ST Deluxe's center/LFE DAC, where I2C does not work because of an address conflict with the CS2000 chip. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: virtuoso: wait for PCM1796 clock to become stableClemens Ladisch
The PCM1796 needs the master clock for I2C communication to work, so add delays after clock changes to ensure that the clock is stable when we try to write the DACs' registers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: virtuoso: do not use fast I2C speedClemens Ladisch
To make the I2C communication reliable when using the H6 daughterboard, reduce the I2C clock frequency. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: oxygen: fix SPI clocks slower than 6.25 MHzClemens Ladisch
Fix wrong register bits for SPI clock cycle times longer than 160 ns, and adjust the polling loop timeout for these speeds. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: oxygen: remove oxygen_model::private_data fieldClemens Ladisch
The number of DACs can now be deduced from the dac_channels_mixer field, so the private_data field is no longer needed. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: oxygen: allow different number of PCM and mixer channelsClemens Ladisch
For cards like the Xonar HDAV1.3, differentiate between the number of PCM channels that can be played and the number of channels whose volume can be adjusted. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10ALSA: Don't leak in sound/core/oss/pcm_oss.c::snd_pcm_hw_param_near()Jesper Juhl
snd_pcm_hw_param_near() will leak the memory allocated to 'save' if the call to snd_pcm_hw_param_max() returns less than zero. This patch makes sure we never leak. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-02ALSA: azt3328: improve snd_azf3328_codec_setdmaa()Andreas Mohr
- add some WARN_ONCE - add multi-I/O helper (and use helper struct) - fix off-by-1 DMA length bug - better variable naming Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-02ALSA: azt3328: use proper private_data hookup for codec identificationAndreas Mohr
- much improved implementation due to clean codec hierarchy - preparation for potential per-codec spinlock change NOTE: additionally removes a chip->pcm[codec_type] NULL ptr check (due to it requiring access to external chip struct), however I believe this to be ok since this condition should not occur and most drivers don't check against that either. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-02ALSA: azt3328: use a helper variable to remove one indirection in hotpathAndreas Mohr
Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-02ALSA: azt3328: cosmetics: use a helper variable for codec setupAndreas Mohr
Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-02ALSA: azt3328: _setfmt() updateAndreas Mohr
- use a separate variable for the frequency part, don't always "or" it - use a "clever"(?) macro to shorten the code Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-02ALSA: azt3328: cosmetics, minor updatesAndreas Mohr
- correct samples to be POSIX shell compatible - add logging of jiffies value in _pointer() - several comments - cleanup Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-14ALSA: ml403-ac97cr: Use vsprintf extension %pR for struct resourceJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-13Merge branch 'topic/workq-update' into topic/miscTakashi Iwai
2010-12-13sound: don't use flush_scheduled_work()Tejun Heo
flush_scheduled_work() is deprecated and scheduled to be removed. * cancel[_delayed]_work() + flush_scheduled_work() -> cancel[_delayed]_work_sync(). * wm8350, wm8753 and soc-core use custom code to cancel a delayed work, execute it immediately if it was pending and wait for its completion. This is equivalent to flush_delayed_work_sync(). Use it instead. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-10ALSA: aoa: Remove wrong i2c_set_clientdata in onyx_i2c_remove()Axel Lin
It does not make sense to set clientdata to onyx in onyx_i2c_remove() as we are going to kfree onyx. What we really want here is i2c_set_clientdata(client, NULL); Since the i2c core will take care of it now, so this patch just removes it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-09ALSA: ice1712 - working M-Audio Delta 66E supportBrian Bloniarz
Rev. E of the M-Audio Delta 66 is partially supported (commit ef2cd2ccad66b4aba518eca7514eface267ee0f3), but the layout of the GPIO pins was still unclear. This patch adds the GPIO definitions so that communication to the CS8247 & 2x AK4524 works correctly. ALSA bug#3327 has more details; users cap & jhunt report there that the GPIO wiring is similar to the Digigram VX442 (chip select: pin 4 = CS8427, pin 5 = AK4524 #0, pin 6 = AK4524 #1). There has been a lot of conflicting information in the bug, but given these definitions, my Delta 66E works; I tested analog in&out at 44.1kHz & 96kHz, analog gain settings, S/PDIF clock sync, and S/PDIF in&out at 44.1kHz. Signed-off-by: Brian Bloniarz <brian.bloniarz@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06Linux 2.6.37-rc5Linus Torvalds
2010-12-06Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2_connection_find() returns pointer to bad structure ocfs2: char is not always signed Ocfs2: Stop tracking a negative dentry after dentry_iput(). ocfs2: fix memory leak fs/ocfs2/dlm: Use GFP_ATOMIC under spin_lock
2010-12-06ARM: tegra: fix regression from addruart rewriteOlof Johansson
Commit 0ea129300982 ("arm: return both physical and virtual addresses from addruart") took out the test for MMU on/off but didn't switch the ldr instructions to no longer be conditionals based on said test. Fix that. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-06Merge branch 'pm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Fix memory corruption related to swap PM / Hibernate: Use async I/O when reading compressed hibernation image
2010-12-06PM / Hibernate: Fix memory corruption related to swapRafael J. Wysocki
There is a problem that swap pages allocated before the creation of a hibernation image can be released and used for storing the contents of different memory pages while the image is being saved. Since the kernel stored in the image doesn't know of that, it causes memory corruption to occur after resume from hibernation, especially on systems with relatively small RAM that need to swap often. This issue can be addressed by keeping the GFP_IOFS bits clear in gfp_allowed_mask during the entire hibernation, including the saving of the image, until the system is finally turned off or the hibernation is aborted. Unfortunately, for this purpose it's necessary to rework the way in which the hibernate and suspend code manipulates gfp_allowed_mask. This change is based on an earlier patch from Hugh Dickins. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Hugh Dickins <hughd@google.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: stable@kernel.org
2010-12-06Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6524/1: GIC irq desciptor bug fix ARM: 6523/1: iop: ensure sched_clock() is notrace ARM: 6456/1: Fix for building DEBUG with sa11xx_base.c as a module. ARM: 6519/1: kuser: Fix incorrect cmpxchg syscall in kuser helpers ARM: 6505/1: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected ARM: 6508/1: vexpress: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL ARM: 6507/1: RealView: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL ARM: 6504/1: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2. ARM: 6503/1: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL ARM: 6502/1: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.S ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in mm/proc-v7.S ARM: 6500/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S ARM: 6498/1: vfp: Correct data alignment for CONFIG_THUMB2_KERNEL ARM: 6497/1: kexec: Correct data alignment for CONFIG_THUMB2_KERNEL ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interrupts ARM: cns3xxx: Fix build with CONFIG_PCI=y
2010-12-06PM / Hibernate: Use async I/O when reading compressed hibernation imageBojan Smojver
This is a fix for reading LZO compressed image using async I/O. Essentially, instead of having just one page into which we keep reading blocks from swap, we allocate enough of them to cover the largest compressed size and then let block I/O pick them all up. Once we have them all (and here we wait), we decompress them, as usual. Obviously, the very first block we still pick up synchronously, because we need to know the size of the lot before we pick up the rest. Also fixed the copyright line, which I've forgotten before. Signed-off-by: Bojan Smojver <bojan@rexursive.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-06Merge branch 'for-rmk-fixes' of git://git.infradead.org/users/cbou/linux-cns3xxxRussell King
2010-12-06sound: Fixed line limit issue in sound/ac97_bus.cJeffrin Jose
This is a patch to the sound/ac97_bus.c file that fixes up a 80 character line limit issue found by the checkpatch.pl tool. Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06ALSA: oxygen: update hardware commentsClemens Ladisch
Reformat and update the comments that describe the hardware connections on the various models. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06ALSA: oxygen: show correct package IDClemens Ladisch
Instead of the hardcoded "CMI8788", show the actual chip name. Note: This is neither what the chip is (it's always the same), nor what the chip is actually called. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06ALSA: oxygen: allow to dump codec registersClemens Ladisch
To help with debugging, add the registers of the model-specific codecs to the controller and AC97 register dump in the proc file. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06ALSA: virtuoso: fix front panel routing for D1/DX/ST(X)Clemens Ladisch
The "Front Panel" switch on the Xonar D1/DX actually switches only the output direction, so mark it appropriately. The front panel microphone is controlled by the FMIC2MIC bit of the CM9780. It was unconditionally enabled on the D1/DX and never set on the ST(X); add a control for it. Selecting the front panel microphone as source does not actually disable the microphone jack, but this is bug-compatible with the Windows driver, and users rely on it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06ALSA: virtuoso: add HDMI enable switch for HDAV1.3Clemens Ladisch
The GPIO bit that enables analog output on the Xonar HDAV1.3 also disables the HDMI audio output, so we better add a switch for it. Hopefully, this is sufficient to make the HDMI output work. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06ALSA: virtuoso: initialize unknown GPIO bitsClemens Ladisch
Initialize the configuration of some unknown GPIO output bits (that might not be used at all) to be the same as in the Windows driver, just to be sure. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06ARM: 6524/1: GIC irq desciptor bug fixChao Xie
gic_set_cpu will directly use irq_desc[]. If CONFIG_SPARSE_IRQ is enabled, there is no irq_desc[]. So we need use irq_to_desc(irq) to get the descriptor for irq. Signed-off-by: Chao Xie <chao.xie@marvell.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-05Merge branch 'slab/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Fix a crash during slabinfo -v
2010-12-05Merge branch 'rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: initramfs: Really fix build break on symbol-prefixed archs [media] Fix Kconfig errors due to two visible menus i2c/algos: convert Kconfig to use the menu's `visible' keyword media/video: convert Kconfig to use the menu's `visible' keyword Revert "i2c: Fix Kconfig dependencies" kconfig: regen parser kconfig: add an option to determine a menu's visibility
2010-12-05Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: parisc: Fix GSC PS/2 driver name for keyboard and mouse parisc: KittyHawk LCD fix parisc: convert the rest of the irq handlers to simple/percpu parisc: fix dino/gsc interrupts parisc: remove redundant initialization in sigsegv path of sys_rt_sigreturn
2010-12-05Revert "vfs: show unreachable paths in getcwd and proc"Eric W. Biederman
Because it caused a chroot ttyname regression in 2.6.36. As of 2.6.36 ttyname does not work in a chroot. It has already been reported that screen breaks, and for me this breaks an automated distribution testsuite, that I need to preserve the ability to run the existing binaries on for several more years. glibc 2.11.3 which has a fix for this is not an option. The root cause of this breakage is: commit 8df9d1a4142311c084ffeeacb67cd34d190eff74 Author: Miklos Szeredi <mszeredi@suse.cz> Date: Tue Aug 10 11:41:41 2010 +0200 vfs: show unreachable paths in getcwd and proc Prepend "(unreachable)" to path strings if the path is not reachable from the current root. Two places updated are - the return string from getcwd() - and symlinks under /proc/$PID. Other uses of d_path() are left unchanged (we know that some old software crashes if /proc/mounts is changed). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> So remove the nice sounding, but ultimately ill advised change to how /proc/fd symlinks work. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-12 05:30:18 +0000