Age | Commit message (Collapse) | Author |
|
The same fix as in 'bonding: move dev_mc_sync after master_upper_dev_link
in bond_enslave' is needed for team driver.
The panic can be reproduced easily:
ip link add team1 type team
ip link set team1 up
ip link add link team1 vlan1 type vlan id 80
ip link set vlan1 master team1
Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Xin Long says:
====================
bonding: a bunch of fixes for dev hwaddr sync in bond_enslave
This patchset is mainly to fix a crash when adding vlan as slave of
bond which is also the parent link in patch 2/3, and also fix some
err process problems in bond_enslave in patch 1/3 and 3/3.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails,
dev_set_promiscuity(-1) should be done before going to the err path.
Otherwise, dev->promiscuity will leak.
Fixes: 7e1a1ac1fbaa ("bonding: Check return of dev_set_promiscuity/allmulti")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Beniamino found a crash when adding vlan as slave of bond which is also
the parent link:
ip link add bond1 type bond
ip link set bond1 up
ip link add link bond1 vlan1 type vlan id 80
ip link set vlan1 master bond1
The call trace is as below:
[<ffffffffa850842a>] queued_spin_lock_slowpath+0xb/0xf
[<ffffffffa8515680>] _raw_spin_lock+0x20/0x30
[<ffffffffa83f6f07>] dev_mc_sync+0x37/0x80
[<ffffffffc08687dc>] vlan_dev_set_rx_mode+0x1c/0x30 [8021q]
[<ffffffffa83efd2a>] __dev_set_rx_mode+0x5a/0xa0
[<ffffffffa83f7138>] dev_mc_sync_multiple+0x78/0x80
[<ffffffffc084127c>] bond_enslave+0x67c/0x1190 [bonding]
[<ffffffffa8401909>] do_setlink+0x9c9/0xe50
[<ffffffffa8403bf2>] rtnl_newlink+0x522/0x880
[<ffffffffa8403ff7>] rtnetlink_rcv_msg+0xa7/0x260
[<ffffffffa8424ecb>] netlink_rcv_skb+0xab/0xc0
[<ffffffffa83fe498>] rtnetlink_rcv+0x28/0x30
[<ffffffffa8424850>] netlink_unicast+0x170/0x210
[<ffffffffa8424bf8>] netlink_sendmsg+0x308/0x420
[<ffffffffa83cc396>] sock_sendmsg+0xb6/0xf0
This is actually a dead lock caused by sync slave hwaddr from master when
the master is the slave's 'slave'. This dead loop check is actually done
by netdev_master_upper_dev_link. However, Commit 1f718f0f4f97 ("bonding:
populate neighbour's private on enslave") moved it after dev_mc_sync.
This patch is to fix it by moving dev_mc_sync after master_upper_dev_link,
so that this loop check would be earlier than dev_mc_sync. It also moves
if (mode == BOND_MODE_8023AD) into if (!bond_uses_primary) clause as an
improvement.
Note team driver also has this issue, I will fix it in another patch.
Fixes: 1f718f0f4f97 ("bonding: populate neighbour's private on enslave")
Reported-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vlan_vids_add_by_dev is called right after dev hwaddr sync, so on
the err path it should unsync dev hwaddr. Otherwise, the slave
dev's hwaddr will never be unsync when this err happens.
Fixes: 1ff412ad7714 ("bonding: change the bond's vlan syncing functions with the standard ones")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the qdisc lock was dropped in pfifo_fast we allow multiple
enqueue threads and dequeue threads to run in parallel. On the
enqueue side the skb bit ooo_okay is used to ensure all related
skbs are enqueued in-order. On the dequeue side though there is
no similar logic. What we observe is with fewer queues than CPUs
it is possible to re-order packets when two instances of
__qdisc_run() are running in parallel. Each thread will dequeue
a skb and then whichever thread calls the ndo op first will
be sent on the wire. This doesn't typically happen because
qdisc_run() is usually triggered by the same core that did the
enqueue. However, drivers will trigger __netif_schedule()
when queues are transitioning from stopped to awake using the
netif_tx_wake_* APIs. When this happens netif_schedule() calls
qdisc_run() on the same CPU that did the netif_tx_wake_* which
is usually done in the interrupt completion context. This CPU
is selected with the irq affinity which is unrelated to the
enqueue operations.
To resolve this we add a RUNNING bit to the qdisc to ensure
only a single dequeue per qdisc is running. Enqueue and dequeue
operations can still run in parallel and also on multi queue
NICs we can still have a dequeue in-flight per qdisc, which
is typically per CPU.
Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array")
Reported-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem.
Tested hardware BM806U is mounted on D-Link DWR-921-C3 router.
The USB id is added to qmi_wwan.c to allow QMI communication with
the BM806U.
Tested on 4.14 kernel and OpenWRT.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
and switch to https where possible.
All links have been eyeballed to verify that the domains have
not changed, etc.
Signed-off-by: Sanjeev Gupta <ghane0@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.16
Some fixes for 4.16, only for iwlwifi and brcmfmac this time. All
pretty small.
iwlwifi
* fix an issue with the multicast queue
* fix IGTK handling
* fix some missing return value checks
* add support for a HW workaround for issues on some platforms
* a couple of fixes for channel-switch
* a few fixes for the aggregation handling code
brcmfmac
* drop Inter-Access Point Protocol packets by default
* fix check for ISO3166 regulatory code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While building ipv6 datagram we currently allow arbitrary large
extheaders, even beyond pmtu size. The syzbot has found a way
to exploit the above to trigger the following splat:
kernel BUG at ./include/linux/skbuff.h:2073!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 4230 Comm: syzkaller672661 Not tainted 4.16.0-rc2+ #326
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__skb_pull include/linux/skbuff.h:2073 [inline]
RIP: 0010:__ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636
RSP: 0018:ffff8801bc18f0f0 EFLAGS: 00010293
RAX: ffff8801b17400c0 RBX: 0000000000000738 RCX: ffffffff84f01828
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8801b415ac18
RBP: ffff8801bc18f360 R08: ffff8801b4576844 R09: 0000000000000000
R10: ffff8801bc18f380 R11: ffffed00367aee4e R12: 00000000000000d6
R13: ffff8801b415a740 R14: dffffc0000000000 R15: ffff8801b45767c0
FS: 0000000001535880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002000b000 CR3: 00000001b4123001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
ip6_finish_skb include/net/ipv6.h:969 [inline]
udp_v6_push_pending_frames+0x269/0x3b0 net/ipv6/udp.c:1073
udpv6_sendmsg+0x2a96/0x3400 net/ipv6/udp.c:1343
inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:640
___sys_sendmsg+0x320/0x8b0 net/socket.c:2046
__sys_sendmmsg+0x1ee/0x620 net/socket.c:2136
SYSC_sendmmsg net/socket.c:2167 [inline]
SyS_sendmmsg+0x35/0x60 net/socket.c:2162
do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x4404c9
RSP: 002b:00007ffdce35f948 EFLAGS: 00000217 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004404c9
RDX: 0000000000000003 RSI: 0000000020001f00 RDI: 0000000000000003
RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 0000000020000080 R11: 0000000000000217 R12: 0000000000401df0
R13: 0000000000401e80 R14: 0000000000000000 R15: 0000000000000000
Code: ff e8 1d 5e b9 fc e9 15 e9 ff ff e8 13 5e b9 fc e9 44 e8 ff ff e8 29
5e b9 fc e9 c0 e6 ff ff e8 3f f3 80 fc 0f 0b e8 38 f3 80 fc <0f> 0b 49 8d
87 80 00 00 00 4d 8d 87 84 00 00 00 48 89 85 20 fe
RIP: __skb_pull include/linux/skbuff.h:2073 [inline] RSP: ffff8801bc18f0f0
RIP: __ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP:
ffff8801bc18f0f0
As stated by RFC 7112 section 5:
When a host fragments an IPv6 datagram, it MUST include the entire
IPv6 Header Chain in the First Fragment.
So this patch addresses the issue dropping datagrams with excessive
extheader length. It also updates the error path to report to the
calling socket nonnegative pmtu values.
The issue apparently predates git history.
v1 -> v2: cleanup error path, as per Eric's suggestion
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+91e6f9932ff122fa4410@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KMSAN reports use of uninitialized memory in the case when |alen| is
smaller than sizeof(struct sockaddr_nl), and therefore |nladdr| isn't
fully copied from the userspace.
Signed-off-by: Alexander Potapenko <glider@google.com>
Fixes: 1da177e4c3f41524 ("Linux-2.6.12-rc2")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Description:
EEE does not work with lan7800 when AutoSpeed is not set.
(This can happen when EEPROM is not populated or configured incorrectly)
Root-Cause:
When EEE is enabled, the mac config register ASD is not set
i.e. in default state, causing EEE fail.
Fix:
Set the register when eeprom is not present.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the SMC experimental TCP option in a SYN packet is lost on
the server side when SYN Cookies are active. However, the corresponding
SYNACK sent back to the client contains the SMC option. This causes an
inconsistent view of the SMC capabilities on the client and server.
This patch disables the SMC option in the SYNACK when SYN Cookies are
active to avoid this issue.
Fixes: 60e2a7780793b ("tcp: TCP experimental option for SMC")
Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Don't pick fixed hash implementation for NFT_SET_EVAL sets, otherwise
userspace hits EOPNOTSUPP with valid rules using the meter statement,
from Florian Westphal.
2) If you send a batch that flushes the existing ruleset (that contains
a NAT chain) and the new ruleset definition comes with a new NAT
chain, don't bogusly hit EBUSY. Also from Florian.
3) Missing netlink policy attribute validation, from Florian.
4) Detach conntrack template from skbuff if IP_NODEFRAG is set on,
from Paolo Abeni.
5) Cache device names in flowtable object, otherwise we may end up
walking over devices going aways given no rtnl_lock is held.
6) Fix incorrect net_device ingress with ingress hooks.
7) Fix crash when trying to read more data than available in UDP
packets from the nf_socket infrastructure, from Subash.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_header_pointer will copy data into a buffer if data is non linear,
otherwise it will return a pointer in the linear section of the data.
nf_sk_lookup_slow_v{4,6} always copies data of size udphdr but later
accesses memory within the size of tcphdr (th->doff) in case of TCP
packets. This causes a crash when running with KASAN with the following
call stack -
BUG: KASAN: stack-out-of-bounds in xt_socket_lookup_slow_v4+0x524/0x718
net/netfilter/xt_socket.c:178
Read of size 2 at addr ffffffe3d417a87c by task syz-executor/28971
CPU: 2 PID: 28971 Comm: syz-executor Tainted: G B W O 4.9.65+ #1
Call trace:
[<ffffff9467e8d390>] dump_backtrace+0x0/0x428 arch/arm64/kernel/traps.c:76
[<ffffff9467e8d7e0>] show_stack+0x28/0x38 arch/arm64/kernel/traps.c:226
[<ffffff946842d9b8>] __dump_stack lib/dump_stack.c:15 [inline]
[<ffffff946842d9b8>] dump_stack+0xd4/0x124 lib/dump_stack.c:51
[<ffffff946811d4b0>] print_address_description+0x68/0x258 mm/kasan/report.c:248
[<ffffff946811d8c8>] kasan_report_error mm/kasan/report.c:347 [inline]
[<ffffff946811d8c8>] kasan_report.part.2+0x228/0x2f0 mm/kasan/report.c:371
[<ffffff946811df44>] kasan_report+0x5c/0x70 mm/kasan/report.c:372
[<ffffff946811bebc>] check_memory_region_inline mm/kasan/kasan.c:308 [inline]
[<ffffff946811bebc>] __asan_load2+0x84/0x98 mm/kasan/kasan.c:739
[<ffffff94694d6f04>] __tcp_hdrlen include/linux/tcp.h:35 [inline]
[<ffffff94694d6f04>] xt_socket_lookup_slow_v4+0x524/0x718 net/netfilter/xt_socket.c:178
Fix this by copying data into appropriate size headers based on protocol.
Fixes: a583636a83ea ("inet: refactor inet[6]_lookup functions to take skb")
Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
syzbot reported a LOCKDEP splat [1] in rt6_age_examine_exception()
rt6_age_examine_exception() is called while rt6_exception_lock is held.
This lock is the lower one in the lock hierarchy, thus we can not
call dst_neigh_lookup() function, as it can fallback to neigh_create()
We should instead do a pure RCU lookup. As a bonus we avoid
a pair of atomic operations on neigh refcount.
[1]
WARNING: possible circular locking dependency detected
4.16.0-rc4+ #277 Not tainted
syz-executor7/4015 is trying to acquire lock:
(&ndev->lock){++--}, at: [<00000000416dce19>] __ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928
but task is already holding lock:
(&tbl->lock){++-.}, at: [<00000000b5cb1d65>] neigh_ifdown+0x3d/0x250 net/core/neighbour.c:292
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&tbl->lock){++-.}:
__raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
_raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312
__neigh_create+0x87e/0x1d90 net/core/neighbour.c:528
neigh_create include/net/neighbour.h:315 [inline]
ip6_neigh_lookup+0x9a7/0xba0 net/ipv6/route.c:228
dst_neigh_lookup include/net/dst.h:405 [inline]
rt6_age_examine_exception net/ipv6/route.c:1609 [inline]
rt6_age_exceptions+0x381/0x660 net/ipv6/route.c:1645
fib6_age+0xfb/0x140 net/ipv6/ip6_fib.c:2033
fib6_clean_node+0x389/0x580 net/ipv6/ip6_fib.c:1919
fib6_walk_continue+0x46c/0x8a0 net/ipv6/ip6_fib.c:1845
fib6_walk+0x91/0xf0 net/ipv6/ip6_fib.c:1893
fib6_clean_tree+0x1e6/0x340 net/ipv6/ip6_fib.c:1970
__fib6_clean_all+0x1f4/0x3a0 net/ipv6/ip6_fib.c:1986
fib6_clean_all net/ipv6/ip6_fib.c:1997 [inline]
fib6_run_gc+0x16b/0x3c0 net/ipv6/ip6_fib.c:2053
ndisc_netdev_event+0x3c2/0x4a0 net/ipv6/ndisc.c:1781
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
call_netdevice_notifiers net/core/dev.c:1725 [inline]
__dev_notify_flags+0x262/0x430 net/core/dev.c:6960
dev_change_flags+0xf5/0x140 net/core/dev.c:6994
devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080
inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919
sock_do_ioctl+0xef/0x390 net/socket.c:957
sock_ioctl+0x36b/0x610 net/socket.c:1081
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> #2 (rt6_exception_lock){+.-.}:
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
_raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
spin_lock_bh include/linux/spinlock.h:315 [inline]
rt6_flush_exceptions+0x21/0x210 net/ipv6/route.c:1367
fib6_del_route net/ipv6/ip6_fib.c:1677 [inline]
fib6_del+0x624/0x12c0 net/ipv6/ip6_fib.c:1761
__ip6_del_rt+0xc7/0x120 net/ipv6/route.c:2980
ip6_del_rt+0x132/0x1a0 net/ipv6/route.c:2993
__ipv6_dev_ac_dec+0x3b1/0x600 net/ipv6/anycast.c:332
ipv6_dev_ac_dec net/ipv6/anycast.c:345 [inline]
ipv6_sock_ac_close+0x2b4/0x3e0 net/ipv6/anycast.c:200
inet6_release+0x48/0x70 net/ipv6/af_inet6.c:433
sock_release+0x8d/0x1e0 net/socket.c:594
sock_close+0x16/0x20 net/socket.c:1149
__fput+0x327/0x7e0 fs/file_table.c:209
____fput+0x15/0x20 fs/file_table.c:243
task_work_run+0x199/0x270 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x9bb/0x1ad0 kernel/exit.c:865
do_group_exit+0x149/0x400 kernel/exit.c:968
get_signal+0x73a/0x16d0 kernel/signal.c:2469
do_signal+0x90/0x1e90 arch/x86/kernel/signal.c:809
exit_to_usermode_loop+0x258/0x2f0 arch/x86/entry/common.c:162
prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
do_syscall_64+0x6ec/0x940 arch/x86/entry/common.c:292
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> #1 (&(&tb->tb6_lock)->rlock){+.-.}:
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
_raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
spin_lock_bh include/linux/spinlock.h:315 [inline]
__ip6_ins_rt+0x56/0x90 net/ipv6/route.c:1007
ip6_route_add+0x141/0x190 net/ipv6/route.c:2955
addrconf_prefix_route+0x44f/0x620 net/ipv6/addrconf.c:2359
fixup_permanent_addr net/ipv6/addrconf.c:3368 [inline]
addrconf_permanent_addr net/ipv6/addrconf.c:3391 [inline]
addrconf_notify+0x1ad2/0x2310 net/ipv6/addrconf.c:3460
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
call_netdevice_notifiers net/core/dev.c:1725 [inline]
__dev_notify_flags+0x15d/0x430 net/core/dev.c:6958
dev_change_flags+0xf5/0x140 net/core/dev.c:6994
do_setlink+0xa22/0x3bb0 net/core/rtnetlink.c:2357
rtnl_newlink+0xf37/0x1a50 net/core/rtnetlink.c:2965
rtnetlink_rcv_msg+0x57f/0xb10 net/core/rtnetlink.c:4641
netlink_rcv_skb+0x14b/0x380 net/netlink/af_netlink.c:2444
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4659
netlink_unicast_kernel net/netlink/af_netlink.c:1308 [inline]
netlink_unicast+0x4c4/0x6b0 net/netlink/af_netlink.c:1334
netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1897
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:639
___sys_sendmsg+0x767/0x8b0 net/socket.c:2047
__sys_sendmsg+0xe5/0x210 net/socket.c:2081
SYSC_sendmsg net/socket.c:2092 [inline]
SyS_sendmsg+0x2d/0x50 net/socket.c:2088
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> #0 (&ndev->lock){++--}:
lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
__raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
_raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312
__ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928
ipv6_dev_mc_dec+0x110/0x1f0 net/ipv6/mcast.c:961
pndisc_destructor+0x21a/0x340 net/ipv6/ndisc.c:392
pneigh_ifdown net/core/neighbour.c:695 [inline]
neigh_ifdown+0x149/0x250 net/core/neighbour.c:294
rt6_disable_ip+0x537/0x700 net/ipv6/route.c:3874
addrconf_ifdown+0x14b/0x14f0 net/ipv6/addrconf.c:3633
addrconf_notify+0x5f8/0x2310 net/ipv6/addrconf.c:3557
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
call_netdevice_notifiers net/core/dev.c:1725 [inline]
__dev_notify_flags+0x262/0x430 net/core/dev.c:6960
dev_change_flags+0xf5/0x140 net/core/dev.c:6994
devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080
inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919
packet_ioctl+0x1ff/0x310 net/packet/af_packet.c:4066
sock_do_ioctl+0xef/0x390 net/socket.c:957
sock_ioctl+0x36b/0x610 net/socket.c:1081
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
other info that might help us debug this:
Chain exists of:
&ndev->lock --> rt6_exception_lock --> &tbl->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&tbl->lock);
lock(rt6_exception_lock);
lock(&tbl->lock);
lock(&ndev->lock);
*** DEADLOCK ***
2 locks held by syz-executor7/4015:
#0: (rtnl_mutex){+.+.}, at: [<00000000a2f16daa>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74
#1: (&tbl->lock){++-.}, at: [<00000000b5cb1d65>] neigh_ifdown+0x3d/0x250 net/core/neighbour.c:292
stack backtrace:
CPU: 0 PID: 4015 Comm: syz-executor7 Not tainted 4.16.0-rc4+ #277
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x24d lib/dump_stack.c:53
print_circular_bug.isra.38+0x2cd/0x2dc kernel/locking/lockdep.c:1223
check_prev_add kernel/locking/lockdep.c:1863 [inline]
check_prevs_add kernel/locking/lockdep.c:1976 [inline]
validate_chain kernel/locking/lockdep.c:2417 [inline]
__lock_acquire+0x30a8/0x3e00 kernel/locking/lockdep.c:3431
lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
__raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
_raw_write_lock_bh+0x31/0x40 kernel/locking/spinlock.c:312
__ipv6_dev_mc_dec+0x45/0x350 net/ipv6/mcast.c:928
ipv6_dev_mc_dec+0x110/0x1f0 net/ipv6/mcast.c:961
pndisc_destructor+0x21a/0x340 net/ipv6/ndisc.c:392
pneigh_ifdown net/core/neighbour.c:695 [inline]
neigh_ifdown+0x149/0x250 net/core/neighbour.c:294
rt6_disable_ip+0x537/0x700 net/ipv6/route.c:3874
addrconf_ifdown+0x14b/0x14f0 net/ipv6/addrconf.c:3633
addrconf_notify+0x5f8/0x2310 net/ipv6/addrconf.c:3557
notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x32/0x70 net/core/dev.c:1707
call_netdevice_notifiers net/core/dev.c:1725 [inline]
__dev_notify_flags+0x262/0x430 net/core/dev.c:6960
dev_change_flags+0xf5/0x140 net/core/dev.c:6994
devinet_ioctl+0x126a/0x1ac0 net/ipv4/devinet.c:1080
inet_ioctl+0x184/0x310 net/ipv4/af_inet.c:919
packet_ioctl+0x1ff/0x310 net/packet/af_packet.c:4066
sock_do_ioctl+0xef/0x390 net/socket.c:957
sock_ioctl+0x36b/0x610 net/socket.c:1081
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Fixes: c757faa8bfa2 ("ipv6: prepare fib6_age() for exception table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ido Schimmel says:
====================
mlxsw: Handle changes to MTU in GRE tunnels
Petr says:
When offloading GRE tunnels, the MTU setting is kept fixed after the
initial offload even as the slow-path configuration changed. Worse: the
offloaded MTU setting is actually just a transient value set at the time
of NETDEV_REGISTER of the tunnel. As of commit ffc2b6ee4174 ("ip_gre:
fix IFLA_MTU ignored on NEWLINK"), that transient value is zero, and
unless there's e.g. a VRF migration that prompts re-offload, it stays at
zero, and all GRE packets end up trapping.
Thus, in patch #1, change the way the MTU is changed post-registration,
so that the full event protocol is observed. That way the drivers get to
see the change and have a chance to react.
In the remaining two patches, implement support for MTU change in mlxsw
driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update MTU of overlay loopback in accordance with the setting on the
tunnel netdevice.
Fixes: 0063587d3587 ("mlxsw: spectrum: Support decap-only IP-in-IP tunnels")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the function so that it can be called without forward declaration
from a function that will be added in a follow-up patch.
Fixes: 0063587d3587 ("mlxsw: spectrum: Support decap-only IP-in-IP tunnels")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For tunnels created with IFLA_MTU, MTU of the netdevice is set by
rtnl_create_link() (called from rtnl_newlink()) before the device is
registered. However without IFLA_MTU that's not done.
rtnl_newlink() proceeds by calling struct rtnl_link_ops.newlink, which
via ip_tunnel_newlink() calls register_netdevice(), and that emits
NETDEV_REGISTER. Thus any listeners that inspect the netdevice get the
MTU of 0.
After ip_tunnel_newlink() corrects the MTU after registering the
netdevice, but since there's no event, the listeners don't get to know
about the MTU until something else happens--such as a NETDEV_UP event.
That's not ideal.
So instead of setting the MTU directly, go through dev_set_mtu(), which
takes care of distributing the necessary NETDEV_PRECHANGEMTU and
NETDEV_CHANGEMTU events.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge misc fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, thp: do not cause memcg oom for thp
mm/vmscan: wake up flushers for legacy cgroups too
Revert "mm: page_alloc: skip over regions of invalid pfns where possible"
mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()
mm/thp: do not wait for lock_page() in deferred_split_scan()
mm/khugepaged.c: convert VM_BUG_ON() to collapse fail
x86/mm: implement free pmd/pte page interfaces
mm/vmalloc: add interfaces to free unmapped page table
h8300: remove extraneous __BIG_ENDIAN definition
hugetlbfs: check for pgoff value overflow
lockdep: fix fs_reclaim warning
MAINTAINERS: update Mark Fasheh's e-mail
mm/mempolicy.c: avoid use uninitialized preferred_node
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"Two regression fixes, two bug fixes for older issues, two fixes for
new functionality added this cycle that have userspace ABI concerns,
and a small cleanup. These have appeared in a linux-next release and
have a build success report from the 0day robot.
* The 4.16 rework of altmap handling led to some configurations
leaking page table allocations due to freeing from the altmap
reservation rather than the page allocator.
The impact without the fix is leaked memory and a WARN() message
when tearing down libnvdimm namespaces. The rework also missed a
place where error handling code needed to be removed that can lead
to a crash if devm_memremap_pages() fails.
* acpi_map_pxm_to_node() had a latent bug whereby it could
misidentify the closest online node to a given proximity domain.
* Block integrity handling was reworked several kernels back to allow
calling add_disk() after setting up the integrity profile.
The nd_btt and nd_blk drivers are just now catching up to fix
automatic partition detection at driver load time.
* The new peristence_domain attribute, a platform indicator of
whether cpu caches are powerfail protected for example, is meant to
be a single value enum and not a set of flags.
This oversight was caught while reviewing new userspace code in
libndctl to communicate the attribute.
Fix this new enabling up so that we are not stuck with an unwanted
userspace ABI"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, nfit: fix persistence domain reporting
libnvdimm, region: hide persistence_domain when unknown
acpi, numa: fix pxm to online numa node associations
x86, memremap: fix altmap accounting at free
libnvdimm: remove redundant assignment to pointer 'dev'
libnvdimm, {btt, blk}: do integrity setup before add_disk()
kernel/memremap: Remove stale devres_free() call
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A bunch of fixes all over the place (core, i915, amdgpu, imx, sun4i,
ast, tegra, vmwgfx), nothing too serious or worrying at this stage.
- one uapi fix to stop multi-planar images with getfb
- Sun4i error path and clock fixes
- udl driver mmap offset fix
- i915 DP MST and GPU reset fixes
- vmwgfx mutex and black screen fixes
- imx array underflow fix and vblank fix
- amdgpu: display fixes
- exynos devicetree fix
- ast mode fix"
* tag 'drm-fixes-for-v4.16-rc7' of git://people.freedesktop.org/~airlied/linux: (29 commits)
drm/ast: Fixed 1280x800 Display Issue
drm: udl: Properly check framebuffer mmap offsets
drm/i915: Specify which engines to reset following semaphore/event lockups
drm/vmwgfx: Fix a destoy-while-held mutex problem.
drm/vmwgfx: Fix black screen and device errors when running without fbdev
drm: Reject getfb for multi-plane framebuffers
drm/amd/display: Add one to EDID's audio channel count when passing to DC
drm/amd/display: We shouldn't set format_default on plane as atomic driver
drm/amd/display: Fix FMT truncation programming
drm/amd/display: Allow truncation to 10 bits
drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()'
drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()'
drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
drm/amd/display: fix dereferencing possible ERR_PTR()
drm/amd/display: Refine disable VGA
drm/tegra: Shutdown on driver unbind
drm/tegra: dsi: Don't disable regulator on ->exit()
drm/tegra: dc: Detach IOMMU group from domain only once
dt-bindings: exynos: Document #sound-dai-cells property of the HDMI node
drm/imx: move arming of the vblank event to atomic_flush
...
|
|
Commit 2516035499b9 ("mm, thp: remove __GFP_NORETRY from khugepaged and
madvised allocations") changed the page allocator to no longer detect
thp allocations based on __GFP_NORETRY.
It did not, however, modify the mem cgroup try_charge() path to avoid
oom kill for either khugepaged collapsing or thp faulting. It is never
expected to oom kill a process to allocate a hugepage for thp; reclaim
is governed by the thp defrag mode and MADV_HUGEPAGE, but allocations
(and charging) should fallback instead of oom killing processes.
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803191409420.124411@chino.kir.corp.google.com
Fixes: 2516035499b9 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations")
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 726d061fbd36 ("mm: vmscan: kick flushers when we encounter dirty
pages on the LRU") added flusher invocation to shrink_inactive_list()
when many dirty pages on the LRU are encountered.
However, shrink_inactive_list() doesn't wake up flushers for legacy
cgroup reclaim, so the next commit bbef938429f5 ("mm: vmscan: remove old
flusher wakeup from direct reclaim path") removed the only source of
flusher's wake up in legacy mem cgroup reclaim path.
This leads to premature OOM if there is too many dirty pages in cgroup:
# mkdir /sys/fs/cgroup/memory/test
# echo $$ > /sys/fs/cgroup/memory/test/tasks
# echo 50M > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
# dd if=/dev/zero of=tmp_file bs=1M count=100
Killed
dd invoked oom-killer: gfp_mask=0x14000c0(GFP_KERNEL), nodemask=(null), order=0, oom_score_adj=0
Call Trace:
dump_stack+0x46/0x65
dump_header+0x6b/0x2ac
oom_kill_process+0x21c/0x4a0
out_of_memory+0x2a5/0x4b0
mem_cgroup_out_of_memory+0x3b/0x60
mem_cgroup_oom_synchronize+0x2ed/0x330
pagefault_out_of_memory+0x24/0x54
__do_page_fault+0x521/0x540
page_fault+0x45/0x50
Task in /test killed as a result of limit of /test
memory: usage 51200kB, limit 51200kB, failcnt 73
memory+swap: usage 51200kB, limit 9007199254740988kB, failcnt 0
kmem: usage 296kB, limit 9007199254740988kB, failcnt 0
Memory cgroup stats for /test: cache:49632KB rss:1056KB rss_huge:0KB shmem:0KB
mapped_file:0KB dirty:49500KB writeback:0KB swap:0KB inactive_anon:0KB
active_anon:1168KB inactive_file:24760KB active_file:24960KB unevictable:0KB
Memory cgroup out of memory: Kill process 3861 (bash) score 88 or sacrifice child
Killed process 3876 (dd) total-vm:8484kB, anon-rss:1052kB, file-rss:1720kB, shmem-rss:0kB
oom_reaper: reaped process 3876 (dd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
Wake up flushers in legacy cgroup reclaim too.
Link: http://lkml.kernel.org/r/20180315164553.17856-1-aryabinin@virtuozzo.com
Fixes: bbef938429f5 ("mm: vmscan: remove old flusher wakeup from direct reclaim path")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit b92df1de5d28 ("mm: page_alloc: skip over regions of
invalid pfns where possible"). The commit is meant to be a boot init
speed up skipping the loop in memmap_init_zone() for invalid pfns.
But given some specific memory mapping on x86_64 (or more generally
theoretically anywhere but on arm with CONFIG_HAVE_ARCH_PFN_VALID) the
implementation also skips valid pfns which is plain wrong and causes
'kernel BUG at mm/page_alloc.c:1389!'
crash> log | grep -e BUG -e RIP -e Call.Trace -e move_freepages_block -e rmqueue -e freelist -A1
kernel BUG at mm/page_alloc.c:1389!
invalid opcode: 0000 [#1] SMP
--
RIP: 0010: move_freepages+0x15e/0x160
--
Call Trace:
move_freepages_block+0x73/0x80
__rmqueue+0x263/0x460
get_page_from_freelist+0x7e1/0x9e0
__alloc_pages_nodemask+0x176/0x420
--
crash> page_init_bug -v | grep RAM
<struct resource 0xffff88067fffd2f8> 1000 - 9bfff System RAM (620.00 KiB)
<struct resource 0xffff88067fffd3a0> 100000 - 430bffff System RAM ( 1.05 GiB = 1071.75 MiB = 1097472.00 KiB)
<struct resource 0xffff88067fffd410> 4b0c8000 - 4bf9cfff System RAM ( 14.83 MiB = 15188.00 KiB)
<struct resource 0xffff88067fffd480> 4bfac000 - 646b1fff System RAM (391.02 MiB = 400408.00 KiB)
<struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB)
<struct resource 0xffff88067fffd640> 100000000 - 67fffffff System RAM ( 22.00 GiB)
crash> page_init_bug | head -6
<struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB)
<struct page 0xffffea0001ede200> 1fffff00000000 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575
<struct page 0xffffea0001ede200> 505736 505344 <struct page 0xffffea0001ed8000> 505855 <struct page 0xffffea0001edffc0>
<struct page 0xffffea0001ed8000> 0 0 <struct pglist_data 0xffff88047ffd9000> 0 <struct zone 0xffff88047ffd9000> DMA 1 4095
<struct page 0xffffea0001edffc0> 1fffff00000400 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575
BUG, zones differ!
crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b787000 7b788000
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
ffffea0001e00000 78000000 0 0 0 0
ffffea0001ed7fc0 7b5ff000 0 0 0 0
ffffea0001ed8000 7b600000 0 0 0 0 <<<<
ffffea0001ede1c0 7b787000 0 0 0 0
ffffea0001ede200 7b788000 0 0 1 1fffff00000000
Link: http://lkml.kernel.org/r/20180316143855.29838-1-neelx@redhat.com
Fixes: b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible")
Signed-off-by: Daniel Vacek <neelx@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
shmem_unused_huge_shrink() gets called from reclaim path. Waiting for
page lock may lead to deadlock there.
There was a bug report that may be attributed to this:
http://lkml.kernel.org/r/alpine.LRH.2.11.1801242349220.30642@mail.ewheeler.net
Replace lock_page() with trylock_page() and skip the page if we failed
to lock it. We will get to the page on the next scan.
We can test for the PageTransHuge() outside the page lock as we only
need protection against splitting the page under us. Holding pin oni
the page is enough for this.
Link: http://lkml.kernel.org/r/20180316210830.43738-1-kirill.shutemov@linux.intel.com
Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Eric Wheeler <linux-mm@lists.ewheeler.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
deferred_split_scan() gets called from reclaim path. Waiting for page
lock may lead to deadlock there.
Replace lock_page() with trylock_page() and skip the page if we failed
to lock it. We will get to the page on the next scan.
Link: http://lkml.kernel.org/r/20180315150747.31945-1-kirill.shutemov@linux.intel.com
Fixes: 9a982250f773 ("thp: introduce deferred_split_huge_page()")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
khugepaged is not yet able to convert PTE-mapped huge pages back to PMD
mapped. We do not collapse such pages. See check
khugepaged_scan_pmd().
But if between khugepaged_scan_pmd() and __collapse_huge_page_isolate()
somebody managed to instantiate THP in the range and then split the PMD
back to PTEs we would have a problem --
VM_BUG_ON_PAGE(PageCompound(page)) will get triggered.
It's possible since we drop mmap_sem during collapse to re-take for
write.
Replace the VM_BUG_ON() with graceful collapse fail.
Link: http://lkml.kernel.org/r/20180315152353.27989-1-kirill.shutemov@linux.intel.com
Fixes: b1caa957ae6d ("khugepaged: ignore pmd tables with THP mapped with ptes")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Implement pud_free_pmd_page() and pmd_free_pte_page() on x86, which
clear a given pud/pmd entry and free up lower level page table(s).
The address range associated with the pud/pmd entry must have been
purged by INVLPG.
Link: http://lkml.kernel.org/r/20180314180155.19492-3-toshi.kani@hpe.com
Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reported-by: Lei Li <lious.lilei@hisilicon.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may
create pud/pmd mappings. A kernel panic was observed on arm64 systems
with Cortex-A75 in the following steps as described by Hanjun Guo.
1. ioremap a 4K size, valid page table will build,
2. iounmap it, pte0 will set to 0;
3. ioremap the same address with 2M size, pgd/pmd is unchanged,
then set the a new value for pmd;
4. pte0 is leaked;
5. CPU may meet exception because the old pmd is still in TLB,
which will lead to kernel panic.
This panic is not reproducible on x86. INVLPG, called from iounmap,
purges all levels of entries associated with purged address on x86. x86
still has memory leak.
The patch changes the ioremap path to free unmapped page table(s) since
doing so in the unmap path has the following issues:
- The iounmap() path is shared with vunmap(). Since vmap() only
supports pte mappings, making vunmap() to free a pte page is an
overhead for regular vmap users as they do not need a pte page freed
up.
- Checking if all entries in a pte page are cleared in the unmap path
is racy, and serializing this check is expensive.
- The unmap path calls free_vmap_area_noflush() to do lazy TLB purges.
Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB
purge.
Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which
clear a given pud/pmd entry and free up a page for the lower level
entries.
This patch implements their stub functions on x86 and arm64, which work
as workaround.
[akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub]
Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com
Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings")
Reported-by: Lei Li <lious.lilei@hisilicon.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Wang Xuefeng <wxf.wang@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chintan Pandya <cpandya@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A bugfix I did earlier caused a build regression on h8300, which defines
the __BIG_ENDIAN macro in a slightly different way than the generic
code:
arch/h8300/include/asm/byteorder.h:5:0: warning: "__BIG_ENDIAN" redefined
We don't need to define it here, as the same macro is already provided
by the linux/byteorder/big_endian.h, and that version does not conflict.
While this is a v4.16 regression, my earlier patch also got backported
to the 4.14 and 4.15 stable kernels, so we need the fixup there as well.
Link: http://lkml.kernel.org/r/20180313120752.2645129-1-arnd@arndb.de
Fixes: 101110f6271c ("Kbuild: always define endianess in kconfig.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A vma with vm_pgoff large enough to overflow a loff_t type when
converted to a byte offset can be passed via the remap_file_pages system
call. The hugetlbfs mmap routine uses the byte offset to calculate
reservations and file size.
A sequence such as:
mmap(0x20a00000, 0x600000, 0, 0x66033, -1, 0);
remap_file_pages(0x20a00000, 0x600000, 0, 0x20000000000000, 0);
will result in the following when task exits/file closed,
kernel BUG at mm/hugetlb.c:749!
Call Trace:
hugetlbfs_evict_inode+0x2f/0x40
evict+0xcb/0x190
__dentry_kill+0xcb/0x150
__fput+0x164/0x1e0
task_work_run+0x84/0xa0
exit_to_usermode_loop+0x7d/0x80
do_syscall_64+0x18b/0x190
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
The overflowed pgoff value causes hugetlbfs to try to set up a mapping
with a negative range (end < start) that leaves invalid state which
causes the BUG.
The previous overflow fix to this code was incomplete and did not take
the remap_file_pages system call into account.
[mike.kravetz@oracle.com: v3]
Link: http://lkml.kernel.org/r/20180309002726.7248-1-mike.kravetz@oracle.com
[akpm@linux-foundation.org: include mmdebug.h]
[akpm@linux-foundation.org: fix -ve left shift count on sh]
Link: http://lkml.kernel.org/r/20180308210502.15952-1-mike.kravetz@oracle.com
Fixes: 045c7a3f53d9 ("hugetlbfs: fix offset overflow in hugetlbfs mmap")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Nic Losby <blurbdust@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Dave Jones reported fs_reclaim lockdep warnings.
============================================
WARNING: possible recursive locking detected
4.15.0-rc9-backup-debug+ #1 Not tainted
--------------------------------------------
sshd/24800 is trying to acquire lock:
(fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30
but task is already holding lock:
(fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(fs_reclaim);
lock(fs_reclaim);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by sshd/24800:
#0: (sk_lock-AF_INET6){+.+.}, at: [<000000001a069652>] tcp_sendmsg+0x19/0x40
#1: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30
stack backtrace:
CPU: 3 PID: 24800 Comm: sshd Not tainted 4.15.0-rc9-backup-debug+ #1
Call Trace:
dump_stack+0xbc/0x13f
__lock_acquire+0xa09/0x2040
lock_acquire+0x12e/0x350
fs_reclaim_acquire.part.102+0x29/0x30
kmem_cache_alloc+0x3d/0x2c0
alloc_extent_state+0xa7/0x410
__clear_extent_bit+0x3ea/0x570
try_release_extent_mapping+0x21a/0x260
__btrfs_releasepage+0xb0/0x1c0
btrfs_releasepage+0x161/0x170
try_to_release_page+0x162/0x1c0
shrink_page_list+0x1d5a/0x2fb0
shrink_inactive_list+0x451/0x940
shrink_node_memcg.constprop.88+0x4c9/0x5e0
shrink_node+0x12d/0x260
try_to_free_pages+0x418/0xaf0
__alloc_pages_slowpath+0x976/0x1790
__alloc_pages_nodemask+0x52c/0x5c0
new_slab+0x374/0x3f0
___slab_alloc.constprop.81+0x47e/0x5a0
__slab_alloc.constprop.80+0x32/0x60
__kmalloc_track_caller+0x267/0x310
__kmalloc_reserve.isra.40+0x29/0x80
__alloc_skb+0xee/0x390
sk_stream_alloc_skb+0xb8/0x340
tcp_sendmsg_locked+0x8e6/0x1d30
tcp_sendmsg+0x27/0x40
inet_sendmsg+0xd0/0x310
sock_write_iter+0x17a/0x240
__vfs_write+0x2ab/0x380
vfs_write+0xfb/0x260
SyS_write+0xb6/0x140
do_syscall_64+0x1e5/0xc05
entry_SYSCALL64_slow_path+0x25/0x25
This warning is caused by commit d92a8cfcb37e ("locking/lockdep:
Rework FS_RECLAIM annotation") which replaced the use of
lockdep_{set,clear}_current_reclaim_state() in __perform_reclaim()
and lockdep_trace_alloc() in slab_pre_alloc_hook() with
fs_reclaim_acquire()/ fs_reclaim_release().
Since __kmalloc_reserve() from __alloc_skb() adds __GFP_NOMEMALLOC |
__GFP_NOWARN to gfp_mask, and all reclaim path simply propagates
__GFP_NOMEMALLOC, fs_reclaim_acquire() in slab_pre_alloc_hook() is
trying to grab the 'fake' lock again when __perform_reclaim() already
grabbed the 'fake' lock.
The
/* this guy won't enter reclaim */
if ((current->flags & PF_MEMALLOC) && !(gfp_mask & __GFP_NOMEMALLOC))
return false;
test which causes slab_pre_alloc_hook() to try to grab the 'fake' lock
was added by commit cf40bd16fdad ("lockdep: annotate reclaim context
(__GFP_NOFS)"). But that test is outdated because PF_MEMALLOC thread
won't enter reclaim regardless of __GFP_NOMEMALLOC after commit
341ce06f69ab ("page allocator: calculate the alloc_flags for allocation
only once") added the PF_MEMALLOC safeguard (
/* Avoid recursion of direct reclaim */
if (p->flags & PF_MEMALLOC)
goto nopage;
in __alloc_pages_slowpath()).
Thus, let's fix outdated test by removing __GFP_NOMEMALLOC test and
allow __need_fs_reclaim() to return false.
Link: http://lkml.kernel.org/r/201802280650.FJC73911.FOSOMLJVFFQtHO@I-love.SAKURA.ne.jp
Fixes: d92a8cfcb37ecd13 ("locking/lockdep: Rework FS_RECLAIM annotation")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Tested-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I'd like to use my personal e-mail for Ocfs2 requests and review.
Link: http://lkml.kernel.org/r/20180311231356.9385-1-mfasheh@versity.com
Signed-off-by: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Alexander reported a use of uninitialized memory in __mpol_equal(),
which is caused by incorrect use of preferred_node.
When mempolicy in mode MPOL_PREFERRED with flags MPOL_F_LOCAL, it uses
numa_node_id() instead of preferred_node, however, __mpol_equal() uses
preferred_node without checking whether it is MPOL_F_LOCAL or not.
[akpm@linux-foundation.org: slight comment tweak]
Link: http://lkml.kernel.org/r/4ebee1c2-57f6-bcb8-0e2d-1833d1ee0bb7@huawei.com
Fixes: fc36b8d3d819 ("mempolicy: use MPOL_F_LOCAL to Indicate Preferred Local Policy")
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The original ast driver cannot display properly if the resolution is 1280x800 and the pixel clock is 83.5MHz.
Here is the update to fix it.
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert one recent commit that added incorrect battery quirks for
some Asus systems and fix an off-by-one error in the watchdog driver
based on the ACPI WDAT table.
Specifics:
- Revert the recent change adding battery quirks for Asus GL502VSK
and UX305LA as these quirks turn out to be inadequate and possibly
premature (Daniel Drake).
- Fix an off-by-one error in the resource allocation part of the
watchdog driver based on the ACPI WDAT table (Takashi Iwai)"
* tag 'acpi-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / watchdog: Fix off-by-one error at resource assignment
Revert "ACPI / battery: Add quirk for Asus GL502VSK and UX305LA"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fix from Jessica Yu:
"Propagate error in modules_open() to avoid possible later NULL
dereference if seq_open() had failed"
* tag 'modules-for-v4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: propagate error in modules_open()
|
|
* acpi-wdat:
ACPI / watchdog: Fix off-by-one error at resource assignment
|
|
Pull networking fixes from David Miller:
1) Always validate XFRM esn replay attribute, from Florian Westphal.
2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long.
3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul
Triebitz.
4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel
Axtens.
5) Fix some interrupt handling issues in e1000e driver, from Benjamin
Poitier.
6) Use strlcpy() in several ethtool get_strings methods, from Florian
Fainelli.
7) Fix rhlist dup insertion, from Paul Blakey.
8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev.
9) Fix driver unload crash when link is up in smsc911x, from Jeremy
Linton.
10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric
Dumazet.
11) Need to purge the write queue when TCP connections are aborted,
otherwise userspace using MSG_ZEROCOPY can't close the fd. From
Soheil Hassas Yeganeh.
12) Fix double free in error path of team driver, from Arkadi
Sharshevsky.
13) Filter fixes for hv_netvsc driver, from Stephen Hemminger.
14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo
Bianconi.
15) Properly filter out unsupported feature flags in macvlan driver,
from Shannon Nelson.
16) Don't request loading the diag module for a protocol if the protocol
itself is not even registered. From Xin Long.
17) If datagram connect fails in ipv6, make sure the socket state is
consistent afterwards. From Paolo Abeni.
18) Use after free in qed driver, from Dan Carpenter.
19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the
entry. From Sabrina Dubroca.
20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins.
21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita.
22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel.
23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti.
24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli.
25) Memory leak in gemini driver, from Igor Pylypiv.
26) IDR leaks in error paths of tcf_*_init() functions, from Davide
Caratti.
27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun.
28) Missing dev_put() in error path of macsec_newlink(), from Dan
Carpenter.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits)
macsec: missing dev_put() on error in macsec_newlink()
net: dsa: Fix functional dsa-loop dependency on FIXED_PHY
hv_netvsc: common detach logic
hv_netvsc: change GPAD teardown order on older versions
hv_netvsc: use RCU to fix concurrent rx and queue changes
hv_netvsc: disable NAPI before channel close
net/ipv6: Handle onlink flag with multipath routes
ppp: avoid loop in xmit recursion detection code
ipv6: sr: fix NULL pointer dereference when setting encap source address
ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state
net: aquantia: driver version bump
net: aquantia: Implement pci shutdown callback
net: aquantia: Allow live mac address changes
net: aquantia: Add tx clean budget and valid budget handling logic
net: aquantia: Change inefficient wait loop on fw data reads
net: aquantia: Fix a regression with reset on old firmware
net: aquantia: Fix hardware reset when SPI may rarely hangup
s390/qeth: on channel error, reject further cmd requests
s390/qeth: lock read device while queueing next buffer
s390/qeth: when thread completes, wake up all waiters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes intended for v4.16-rc7:
MMC host:
- dw_mmc: Fix the suspend/resume issue for Exynos5433
- dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit
systems
- dw_mmc: Make PIO mode work when failing with idmac when
dw_mci_reset occurs
- sdhci-acpi: Re-allow IRQ 0 to fix broken probe
MMC core:
- Update EXT_CSD caches to correctly switch partition for ioctl calls
- Fix tracepoint print of blk_addr and blksz
- Disable HPI on broken Micron (Numonyx) eMMC cards"
* tag 'mmc-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-acpi: Fix IRQ 0
mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs
mmc: core: Fix tracepoint print of blk_addr and blksz
mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards
mmc: dw_mmc: exynos: fix the suspend/resume issue for exynos5433
mmc: block: fix updating ext_csd caches on ioctl call
mmc: dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit systems
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Main change is a patch to reject getfb call for multiplanar framebuffers,
then we have a couple of error path fixes on the sun4i driver. Still on that
driver there is a clk fix and finally a mmap offset fix on the udl driver.
* tag 'drm-misc-fixes-2018-03-22' of git://anongit.freedesktop.org/drm/drm-misc:
drm: udl: Properly check framebuffer mmap offsets
drm: Reject getfb for multi-plane framebuffers
drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()'
drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()'
drm/sun4i: Fix an error handling path in 'sun4i_drv_bind()'
drm/sun4i: Fix exclusivity of the TCON clocks
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
One fix for DP MST and one fix for GPU reset on hang check.
* tag 'drm-intel-fixes-2018-03-21' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Specify which engines to reset following semaphore/event lockups
drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
Two vmwgfx fixes for 4.16. Both cc'd stable.
* 'vmwgfx-fixes-4.16' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Fix a destoy-while-held mutex problem.
drm/vmwgfx: Fix black screen and device errors when running without fbdev
|
|
git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: fixes for early vblank event issue, array underflow error
- fix an array underflow error by reordering the range check before the array
subscript in ipu-prg.
- make some local functions static in ipuv3-plane.
- add a missng header for ipu_planes_assign_pre in ipuv3-plane.
- move arming of the vblank event from atomic_begin to atomic_flush, to avoid
signalling atomic commit completion to userspace before plane atomic_update
has finished, due to a race condition that is likely to be hit on i.MX6QP on
PRE enabled channels.
* tag 'imx-drm-fixes-2018-03-22' of git://git.pengutronix.de/git/pza/linux:
drm/imx: move arming of the vblank event to atomic_flush
drm/imx: ipuv3-plane: Include "imx-drm.h" header file
drm/imx: ipuv3-plane: Make functions static when possible
gpu: ipu-v3: prg: avoid possible array underflow
|
|
We moved the dev_hold(real_dev); call earlier in the function but forgot
to update the error paths.
Fixes: 0759e552bce7 ("macsec: fix negative refcnt on parent link")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two more fixes (in three patches):
* ath9k_htc doesn't like QoS NDP frames, use regular ones
* hwsim: set up wmediumd for radios created later
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have a functional dependency on the FIXED_PHY MDIO bus because we register
fixed PHY devices "the old way" which only works if the code that does this has
had a chance to run before the fixed MDIO bus is probed. Make sure we account
for that and have dsa_loop_bdinfo.o be either built-in or modular depending on
whether CONFIG_FIXED_PHY reflects that too.
Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Stephen Hemminger says:
====================
hv_netvsc: fix races during shutdown and changes
This set of patches fixes issues identified by Vitaly Kuznetsov and
Mohammed Gamal related to state changes in Hyper-v network driver.
A lot of the issues are because setting up the netvsc device requires
a second step (in work queue) to get all the sub-channels running.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|