| Age | Commit message (Collapse) | Author |
|---|
|
NFS: NFSoRDMA Client Side Changes
In addition to a variety of bugfixes, these patches are mostly geared at
enabling both swap and backchannel support to the NFS over RDMA client.
Signed-off-by: Anna Schumake <Anna.Schumaker@Netapp.com>
|
|
Forechannel transports get their own "bc_up" method to create an
endpoint for the backchannel service.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[Anna Schumaker: Add forward declaration of struct net to xprt.h]
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
For loosely coupled pNFS/flexfiles systems, there is often no advantage
at all in going through the MDS for I/O, since the MDS is subject to
the same limitations as all other clients when talking to DSes. If a
DS is unresponsive, I/O through the MDS will fail.
For such systems, the only scalable solution is to have the pNFS clients
retry doing pNFS, and so the protocol now provides a flag that allows
the pNFS server to signal this.
If LAYOUTGET returns FF_FLAGS_NO_IO_THRU_MDS, then we should assume that
the MDS wants the client to retry using these devices, even if they were
previously marked as being unavailable. To do so, we add a helper,
ff_layout_mark_devices_valid() that will be called from layoutget.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If the pNFS/flexfiles file is mirrored, and a read to one mirror fails,
then we should bump the mirror index, so that we retry to a different
mirror. Once we've iterated through all mirrors and all failed, we can
return the layout and issue a new LAYOUTGET.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Allow the use of other transport classes when handling a backward
direction RPC call.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
On NFSv4.1 mount points, the Linux NFS client uses this transport
endpoint to receive backward direction calls and route replies back
to the NFSv4.1 server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Introduce a code path in the rpcrdma_reply_handler() to catch
incoming backward direction RPC calls and route them to the ULP's
backchannel server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Backward direction RPC replies are sent via the client transport's
send_request method, the same way forward direction RPC calls are
sent.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pre-allocate extra send and receive Work Requests needed to handle
backchannel receives and sends.
The transport doesn't know how many extra WRs to pre-allocate until
the xprt_setup_backchannel() call, but that's long after the WRs are
allocated during forechannel setup.
So, use a fixed value for now.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
xprtrdma's backward direction send and receive buffers are the same
size as the forechannel's inline threshold, and must be pre-
registered.
The consumer has no control over which receive buffer the adapter
chooses to catch an incoming backwards-direction call. Any receive
buffer can be used for either a forward reply or a backward call.
Thus both types of RPC message must all be the same size.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
xprt_{setup,destroy}_backchannel() won't be adequate for RPC/RMDA
bi-direction. In particular, receive buffers have to be pre-
registered and posted in order to receive incoming backchannel
requests.
Add a virtual function call to allow the insertion of appropriate
backchannel setup and destruction methods for each transport.
In addition, freeing a backchannel request is a little different
for RPC/RDMA. Introduce an rpc_xprt_op to handle the difference.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Now that RPC replies are processed in a workqueue, there's no need
to disable IRQs when managing send and receive buffers. This saves
noticeable overhead per RPC.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: The reply tasklet is no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The reply tasklet is fast, but it's single threaded. After reply
traffic saturates a single CPU, there's no more reply processing
capacity.
Replace the tasklet with a workqueue to spread reply handling across
all CPUs. This also moves RPC/RDMA reply handling out of the soft
IRQ context and into a context that allows sleeps.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The rb_send_bufs and rb_recv_bufs arrays are used to implement a
pair of stacks for keeping track of free rpcrdma_req and rpcrdma_rep
structs. Replace those arrays with free lists.
To allow more than 512 RPCs in-flight at once, each of these arrays
would be larger than a page (assuming 8-byte addresses and 4KB
pages). Allowing up to 64K in-flight RPCs (as TCP now does), each
buffer array would have to be 128 pages. That's an order-6
allocation. (Not that we're going there.)
A list is easier to expand dynamically. Instead of allocating a
larger array of pointers and copying the existing pointers to the
new array, simply append more buffers to each list.
This also makes it simpler to manage receive buffers that might
catch backwards-direction calls, or to post receive buffers in
bulk to amortize the overhead of ib_post_recv.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: The error cases in rpcrdma_reply_handler() almost never
execute. Ensure the compiler places them out of the hot path.
No behavior change expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Commit 8301a2c047cc ("xprtrdma: Limit work done by completion
handler") was supposed to prevent xprtrdma's upcall handlers from
starving other softIRQ work by letting them return to the provider
before all CQEs have been polled.
The logic assumes the provider will call the upcall handler again
immediately if the CQ is re-armed while there are still queued CQEs.
This assumption is invalid. The IBTA spec says that after a CQ is
armed, the hardware must interrupt only when a new CQE is inserted.
xprtrdma can't rely on the provider calling again, even though some
providers do.
Therefore, leaving CQEs on queue makes sense only when there is
another mechanism that ensures all remaining CQEs are consumed in a
timely fashion. xprtrdma does not have such a mechanism. If a CQE
remains queued, the transport can wait forever to send the next RPC.
Finally, move the wcs array back onto the stack to ensure that the
poll array is always local to the CPU where the completion upcall is
running.
Fixes: 8301a2c047cc ("xprtrdma: Limit work done by completion ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
ib_req_notify_cq(IB_CQ_REPORT_MISSED_EVENTS) returns a positive
value if WCs were added to a CQ after the last completion upcall
but before the CQ has been re-armed.
Commit 7f23f6f6e388 ("xprtrmda: Reduce lock contention in
completion handlers") assumed that when ib_req_notify_cq() returned
a positive RC, the CQ had also been successfully re-armed, making
it safe to return control to the provider without losing any
completion signals. That is an invalid assumption.
Change both completion handlers to continue polling while
ib_req_notify_cq() returns a positive value.
Fixes: 7f23f6f6e388 ("xprtrmda: Reduce lock contention in ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
After adding a swapfile on an NFS/RDMA mount and removing the
normal swap partition, I was able to push the NFS client well
into swap without any issue.
I forgot to swapoff the NFS file before rebooting. This pinned
the NFS mount and the IB core and provider, causing shutdown to
hang. I think this is expected and safe behavior. Probably
shutdown scripts should "swapoff -a" before unmounting any
filesystems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Unsignaled send WRs can get flushed as part of normal unmount, so don't
log them as warnings.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
* bugfixes:
NFSv4.1/pnfs: Retry through MDS when getting bad length of data
nfs/blocklayout: Fix bad using of page offset in bl_read_pagelist
NFS: Return directly if encode_sessionid fail
NFS: Fix bad checking of max taglen in callback request
NFS: Fix bad defines of callback response maxsize
NFS: Use NFS4_MAX_SESSIONID_LEN directly for decode/encode sessionid
NFS: Remove unneeded NFS_DEBUG checking before define NFSDBG_FACILITY
NFS: Remove the left function defines in callback.h
NFS: Remove the left global variable nfs_callback_tcpport
NFS: Get rid of the unneeded addr stored in callback arguments
nfsroot: make nfsroot to accept the 1024 bytes long directory name
|
|
If non rpc-based layout driver return bad length of data, nfs retries
by calling rpc_restart_call_prepare() that cause an NULL reference panic.
This patch lets nfs retry through MDS for non rpc-based layout driver
return bad length of data.
[13034.883329] BUG: unable to handle kernel NULL pointer dereference at (null)
[13034.884902] IP: [<ffffffffa00db372>] rpc_restart_call_prepare+0x62/0x90 [sunrpc]
[13034.886558] PGD 0
[13034.888126] Oops: 0000 [#1] KASAN
[13034.889710] Modules linked in: blocklayoutdriver(OE) nfsv4(OE) nfs(OE) fscache(E) nfsd(OE) xfs libcrc32c coretemp btrfs crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev vmw_balloon auth_rpcgss shpchp nfs_acl lockd vmw_vmci parport_pc xor raid6_pq grace parport sunrpc i2c_piix4 vmwgfx drm_kms_helper ttm drm mptspi e1000 serio_raw scsi_transport_spi mptscsih mptbase ata_generic pata_acpi [last unloaded: fscache]
[13034.898260] CPU: 0 PID: 10112 Comm: kworker/0:1 Tainted: G OE 4.3.0-rc5+ #279
[13034.899932] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015
[13034.903342] Workqueue: events bl_read_cleanup [blocklayoutdriver]
[13034.905059] task: ffff88006a9148c0 ti: ffff880035e90000 task.ti: ffff880035e90000
[13034.906827] RIP: 0010:[<ffffffffa00db372>] [<ffffffffa00db372>] rpc_restart_call_prepare+0x62/0x90 [sunrpc]
[13034.910522] RSP: 0018:ffff880035e97b58 EFLAGS: 00010282
[13034.912378] RAX: fffffbfff04a5a94 RBX: ffff880068fe4858 RCX: 0000000000000003
[13034.914339] RDX: dffffc0000000000 RSI: 0000000000000003 RDI: 0000000000000282
[13034.916236] RBP: ffff880035e97b68 R08: 0000000000000001 R09: 0000000000000001
[13034.918229] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[13034.920007] R13: ffff880068fe4858 R14: ffff880068fe4a60 R15: 0000000000001000
[13034.921845] FS: 0000000000000000(0000) GS:ffffffff82247000(0000) knlGS:0000000000000000
[13034.923645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[13034.925525] CR2: 0000000000000000 CR3: 00000000063dd000 CR4: 00000000001406f0
[13034.932808] Stack:
[13034.934813] ffff880068fe4780 0000000000001000 ffff880035e97ba8 ffffffffa08800d2
[13034.936675] ffffffffa088029d ffff880068fe4780 ffff880068fe4858 ffffffffa089c0a0
[13034.938593] ffff880068fe47e0 ffff88005d59faf0 ffff880035e97be0 ffffffffa087e08f
[13034.940454] Call Trace:
[13034.942388] [<ffffffffa08800d2>] nfs_readpage_result+0x112/0x200 [nfs]
[13034.944317] [<ffffffffa088029d>] ? nfs_readpage_done+0xdd/0x160 [nfs]
[13034.946267] [<ffffffffa087e08f>] nfs_pgio_result+0x9f/0x120 [nfs]
[13034.948166] [<ffffffffa09266cc>] pnfs_ld_read_done+0x7c/0x1e0 [nfsv4]
[13034.950247] [<ffffffffa03b07ee>] bl_read_cleanup+0x2e/0x60 [blocklayoutdriver]
[13034.952156] [<ffffffff810ebf62>] process_one_work+0x412/0x870
[13034.954102] [<ffffffff810ebe84>] ? process_one_work+0x334/0x870
[13034.955949] [<ffffffff810ebb50>] ? queue_delayed_work_on+0x40/0x40
[13034.957985] [<ffffffff810ec441>] worker_thread+0x81/0x6a0
[13034.959817] [<ffffffff810ec3c0>] ? process_one_work+0x870/0x870
[13034.961785] [<ffffffff810f43bd>] kthread+0x17d/0x1a0
[13034.963544] [<ffffffff810f4240>] ? kthread_create_on_node+0x330/0x330
[13034.965479] [<ffffffff81100428>] ? finish_task_switch+0x88/0x220
[13034.967223] [<ffffffff810f4240>] ? kthread_create_on_node+0x330/0x330
[13034.968929] [<ffffffff81b6ae5f>] ret_from_fork+0x3f/0x70
[13034.970534] [<ffffffff810f4240>] ? kthread_create_on_node+0x330/0x330
[13034.972176] Code: c7 43 50 40 84 0d a0 e8 3d fe 1c e1 48 8d 7b 58 c7 83 e4 00 00 00 00 00 00 00 e8 ca fe 1c e1 4c 8b 63 58 4c 89 e7 e8 be fe 1c e1 <49> 83 3c 24 00 74 12 48 c7 43 50 f0 a2 0e a0 b8 01 00 00 00 5b
[13034.977148] RIP [<ffffffffa00db372>] rpc_restart_call_prepare+0x62/0x90 [sunrpc]
[13034.978780] RSP <ffff880035e97b58>
[13034.980399] CR2: 0000000000000000
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Blocklayout uses file offset for the read-back page's offset of first writing,
it's definitely wrong, it writes data to bad address of page that cause userspace
application segment fault. It must be the page base stored in header->args.pgbase.
Also, the pg_offset has no influence with isect and extent length.
Note: The offset of the non-first page is always zero.
Ps: A test program will segment fault at read() as,
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
int main(int argc, char **argv)
{
char buf[2049];
char *filename = NULL;
int fd = -1;
if (argc < 2) {
printf("Usage: %s filename\n", argv[0]);
return 0;
}
filename = argv[1];
fd = open(filename, O_RDONLY | O_DIRECT);
if (fd < 0) {
printf("Open %s fail: %m\n", filename);
return 1;
}
lseek(fd, 2048, SEEK_SET);
if (read(fd, buf, sizeof(buf) - 1) != (sizeof(buf) - 1))
printf("Read 4096 bityes data from %s fail: %m\n", filename);
out:
close(fd);
return 0;
}
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
encode_sessionid() may return error, nfs needs process the return value.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The taglen should be checked with CB_OP_TAGLEN_MAXSZ directly.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
As CB_OP_TAGLEN_MAXSZ, all XXX_MAXSZ should be defined as bit.
Each operation should not cantains CB_OP_TAGLEN_MAXSZ.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
It's no need to define a temporary variables for NFS4_MAX_SESSIONID_LEN.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
It's not needed to checking NFS_DEBUG before define NFSDBG_FACILITY, remove it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Commit 778be232a207 "NFS do not find client in NFSv4 pg_authenticate" has remove
the define and using of nfs4_set_callback_sessionid(), and
commit 36281caa839f "NFSv4: Further clean-ups of delegation stateid validation"
has update the checking of stateid, and move the code to nfs4proc.c.
This patch remove those function defines left in callback.h
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Commit bbe0a3aa4e22 "NFS: make nfs_callback_tcpport per network context" has
make nfs_callback_tcpport per network, but left the global nfs_callback_tcpport,
remove it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Commit c36fca52f5 "NFS refactor nfs_find_client and reference client
across callback processing" has store clp in cb_process_state
which is set in cb_sequence.
So that, it's unneeded to store address pointer in any callback arguments.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
although NFS_MAXPATHLEN is defined to 1024, nfs client hopes to accept
a 1024 byte path, but nfs_root_parms is limited to 256, and the nfs path
will truncated when a user inputs nfs path from kernel cmdline
enlarge nfs_root_parms to 1024, to make it accept the 1024 bytes long
directory name, since nfs_root_parms is defined as _initdata, it will
be released after system bootup
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
* nfsclone:
nfs: add missing linux/types.h
NFS: Fix an 'unused variable' complaint when #ifndef CONFIG_NFS_V4_2
nfs42: add NFS_IOC_CLONE_RANGE ioctl
nfs42: respect clone_blksize
nfs: get clone_blksize when probing fsinfo
nfs42: add NFS_IOC_CLONE ioctl
nfs42: add CLONE proc functions
nfs42: add CLONE xdr functions
|
|
After merging the nfs tree, today's linux-next build (powerpc allyesconfig
produced this warning:
./usr/include/linux/nfs.h:40: found __[us]{8,16,32,64} type without #include <linux/types.h>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Here are some bugfixes for the I2C subsystem.
Kieran found a flaw in the recently renewed wake irq handling. Mika
handled a user bug report where the ACPI info turned out to be
unusable. I updated MAINTAINERS so that such bug reports will sooner
get to the right people. Geert pointed me to a problem of some i2c
drivers regarding PM which I fixed"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348
MAINTAINERS: add maintainers for Synopsis Designware I2C drivers
i2c: designware-platdrv: enable RuntimePM before registering to the core
i2c: s3c2410: enable RuntimePM before registering to the core
i2c: rcar: enable RuntimePM before registering to the core
i2c: return probe deferred status on dev_pm_domain_attach
|
|
ACPI SSCN/FMCN methods were originally added because then the platform can
provide the most accurate HCNT/LCNT values to the driver. However, this
seems not to be true for Dell Inspiron 7348 where using these causes the
touchpad to fail in boot:
i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration
i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
i2c_designware INT3433:00: controller timed out
The values received from ACPI are (in fast mode):
HCNT: 72
LCNT: 160
this translates to following timings (input clock is 100MHz on Broadwell):
tHIGH: 720 ns (spec min 600 ns)
tLOW: 1600 ns (spec min 1300 ns)
Bus period: 2920 ns (assuming 300 ns tf and tr)
Bus speed: 342.5 kHz
Both tHIGH and tLOW are within the I2C specification.
The calculated values when ACPI parameters are not used are (in fast mode):
HCNT: 87
LCNT: 159
which translates to:
tHIGH: 870 ns (spec min 600 ns)
tLOW: 1590 ns (spec min 1300 ns)
Bus period 3060 ns (assuming 300 ns tf and tr)
Bus speed 326.8 kHz
These values are also within the I2C specification.
Since both ACPI and calculated values meet the I2C specification timing
requirements it is hard to say why the touchpad does not function properly
with the ACPI values except that the bus speed is higher in this case (but
still well below the max 400kHz).
Solve this by adding DMI quirk to the driver that disables using ACPI
parameters on this particulare machine.
Reported-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq/timer fixes from Thomas Gleixner:
"irq: a fix for the new hierarchical MSI interrupt handling which
unbreaks PCI=n configurations.
timers: a fix for the new hrtimer clock offset update mechanism to
ensure that the boot time offset is respected"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Do not use pci_msi_[un]mask_irq as default methods
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Increment clock_was_set_seq in timekeeping_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Just two small fixups to ads7846 touchscreen controller driver and
Cypress touchpad driver"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cyapa - fix the copy paste error on electrodes_rx value
Input: ads7846 - correct the value got from SPI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"Just one revert for Armada XP devices: the conversion to
of_clk_get_parent_name() wasn't a direct translation, so we
revert back to of_clk_get() + __clk_get_name().
We could make of_clk_get_parent_name() more robust, but that
may have unintended side-effects, so we'll do that in the
next version"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Partially revert "clk: mvebu: Convert to clk_hw based provider APIs"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Two DM target error path cleanup fixes (one for stable in DM thinp and
one for a v4.3-rc5 thinko in DM snapshot)"
* tag 'dm-4.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin: fix missing pool reference count decrement in pool_ctr error path
dm snapshot persistent: fix missing cleanup in persistent_ctr error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"I have two more bug fixes for btrfs.
My commit fixes a bug we hit last week at FB, a combination of lots of
hard links and an admin command to resolve inode numbers.
Dave is adding checks to make sure balance on current kernels ignores
filters it doesn't understand. The penalty for being wrong is just
doing more work (not crashing etc), but it's a good fix"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix use after free iterating extrefs
btrfs: check unsupported filters in balance arguments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph fixes from Sage Weil:
"Just two small items from Ilya:
The first patch fixes the RBD readahead to grab full objects. The
second fixes the write ops to prevent undue promotion when a cache
tier is configured on the server side"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: use writefull op for object size writes
rbd: set max_sectors explicitly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These fix two recent regressions (ACPICA, the generic power domains
framework) and one crash that may happen on specific hardware
supported since 4.1 (intel_pstate).
Specifics:
- Fix a regression introduced by a recent ACPICA cleanup that
uncovered a latent bug (Lv Zheng).
- Fix a recent regression in the generic power domains framework that
may cause it to violate PM QoS latency constraints in some cases
(Ulf Hansson).
- Fix an intel_pstate driver crash on the Knights Landing chips that
do not update the MPERF counter as often as expected by the driver
which may result in a divide by 0 (Srinivas Pandruvada)"
* tag 'pm+acpi-4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL)
ACPICA: Tables: Fix FADT dependency regression
PM / Domains: Fix validation of latency constraints in genpd governor
|
|
Pull drm fixes from Dave Airlie:
"Nothing too crazy or exciting:
- two MAINTAINERS entries that I didn't see the point in delaying.
- one drm mst fix to stop sending uninitialised data to monitors
- two amdgpu fixes
- one radeon mst tiling fix
- one vmwgfx regression fix
- one virtio warning fix.
I have found one locking problem that needs a bit of reorg to fix, but
I'm not sure it's worth putting in -fixes as I don't think we've seen
it hit in the real world ever, I just found it using the virtio-gpu
driver when working on it. I'll possibly send it next week once I've
time to discuss with Daniel"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/virtio: use %llu format string form atomic64_t
MAINTAINERS: Add myself as maintainer for the gma500 driver
MAINTAINERS: add a maintainer for the atmel-hlcdc DRM driver
drm/amdgpu: Keep the pflip interrupts always enabled v7
drm/amdgpu: adjust default dispclk (v2)
drm/dp/mst: make mst i2c transfer code more robust.
drm/radeon: attach tile property to mst connector
drm/vmwgfx: Fix kernel NULL pointer dereference on older hardware
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Re-enable CONFIG_SCSI_DH in our defconfigs
- Remove unused os_area_db_id_video_mode
- cxl: fix leak of IRQ names in cxl_free_afu_irqs() from Andrew
- cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API from Andrew
- cxl: fix leak of ctx->mapping when releasing kernel API contexts from Andrew
- cxl: Workaround malformed pcie packets on some cards from Philippe
- cxl: Fix number of allocated pages in SPA from Christophe Lombard
- Fix checkstop in native_hpte_clear() with lockdep from Cyril
- Panic on unhandled Machine Check on powernv from Daniel
- selftests/powerpc: Fix build failure of load_unaligned_zeropad test
* tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build failure of load_unaligned_zeropad test
powerpc/powernv: Panic on unhandled Machine Check
powerpc: Fix checkstop in native_hpte_clear() with lockdep
cxl: Fix number of allocated pages in SPA
cxl: Workaround malformed pcie packets on some cards
cxl: fix leak of ctx->mapping when releasing kernel API contexts
cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API
cxl: fix leak of IRQ names in cxl_free_afu_irqs()
powerpc/ps3: Remove unused os_area_db_id_video_mode
powerpc/configs: Re-enable CONFIG_SCSI_DH
|
|
Merge misc fixes from Andrew Morton:
"6 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
sh: add copy_user_page() alias for __copy_user()
lib/Kconfig: ZLIB_DEFLATE must select BITREVERSE
mm, dax: fix DAX deadlocks
memcg: convert threshold to bytes
builddeb: remove debian/files before build
mm, fs: obey gfp_mapping for add_to_page_cache()
|
|
copy_user_page() is needed by DAX. Without this we get a compile error
for DAX on SH:
fs/dax.c:280:2: error: implicit declaration of function `copy_user_page' [-Werror=implicit-function-declaration]
copy_user_page(vto, (void __force *)vfrom, vaddr, to);
^
This was done with a random config that happened to include DAX support.
This patch has only been compile tested.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
lib/built-in.o: In function `__bitrev32':
deftree.c:(.text+0x1e799): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7a0): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7b4): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7c1): undefined reference to `byte_rev_table'
Anything which uses bitrevX() has to select BITREVERSE, to grab
lib/bitrev.o.
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The following two locking commits in the DAX code:
commit 843172978bb9 ("dax: fix race between simultaneous faults")
commit 46c043ede471 ("mm: take i_mmap_lock in unmap_mapping_range() for DAX")
introduced a number of deadlocks and other issues which need to be fixed
for the v4.3 kernel. The list of issues in DAX after these commits
(some newly introduced by the commits, some preexisting) can be found
here:
https://lkml.org/lkml/2015/9/25/602 (Subject: "Re: [PATCH] dax: fix deadlock in __dax_fault").
This undoes most of the changes introduced by those two commits,
essentially returning us to the DAX locking scheme that was used in
v4.2.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
