| Age | Commit message (Collapse) | Author |
|---|
|
Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
We're trying to have a fairly strict split between core functionality
that defines the uapi, including the docs, and the helper functions to
implement it.
Move drm_plane_enable_fb_damage_clips and associated kerneldoc into
drm_plane from drm_damage_helper.c to fix this.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-3-daniel.vetter@ffwll.ch
|
|
There's two stages of manual upload/invalidate displays:
- just handling dirtyfb and uploading the entire fb all the time
- looking at damage clips
In the latter case we support it through fbdev emulation (with
fb_defio), atomic property, and with the dirtfy clip rects.
Make sure at least the atomic property is set up as the main official
interface for this. Ideally we'd also check that
drm_atomic_helper_dirtyfb() is used and that fbdev defio is set up,
but that's quite a bit harder to do. Ideas very much welcome.
From a cursor audit drivers seem to be getting this right mostly, but
better to make sure. At least no one is bypassing the accessor
function.
v2:
- use drm_warn_once with a meaningful warning string (José)
- don't splat in the atomic check code for everyone (intel-gfx-ci)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-2-daniel.vetter@ffwll.ch
|
|
It's not used. Drivers should instead use the helpers anyway.
Currently both vbox and i915 hand-roll this and it's not the greatest.
vbox looks buggy, and i915 does a bit much that helpers would take
care of I think.
Also improve the kerneldocs while we're at it.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-1-daniel.vetter@ffwll.ch
|
|
s/Exporting/Importing
Fixes: 805dc614d58a8 ("drm/prime: Update docs")
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723123307.31064-1-jmcasanova@igalia.com
|
|
Finding panel_or_bridge might vary based on associated
DSI devices like DSI panel, bridge, and I2C based DSI
bridge.
1. DSI panels and bridges will invoke the host attach
from probe in order to find the panel_or_bridge.
chipone_probe()
dw_mipi_dsi_host_attach().start
dw_mipi_dsi_panel_or_bridge()
...found the panel_or_bridge...
ltdc_encoder_init().start
dw_mipi_dsi_bridge_attach().start
dw_mipi_dsi_host_attach().start
chipone_attach(). start
chipone_attach(). done
dw_mipi_dsi_host_attach().done
dw_mipi_dsi_bridge_attach(). done
ltdc_encoder_init().done
2. I2C based DSI bridge will invoke the drm_bridge_attach
from bridge attach in order to find the panel_or_bridge.
ltdc_encoder_init().start
dw_mipi_dsi_bridge_attach().start
dw_mipi_dsi_panel_or_bridge()
...found the panel_or_bridge...
dw_mipi_dsi_host_attach().start
sn65dsi83_attach(). start
sn65dsi83_attach(). done
dw_mipi_dsi_host_attach().done
dw_mipi_dsi_bridge_attach(). done
ltdc_encoder_init().done
So, invoke the panel_or_bridge from host attach and
bridge attach in order to find all possible DSI devices.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210704140309.268469-1-jagan@amarulasolutions.com
|
|
When # CONFIG_EFI is not set, there are 2 definitions of
sysfb_apply_efi_quirks(). The stub from sysfb.h should be used
and the __init function from sysfb_efi.c should not be used.
../drivers/firmware/efi/sysfb_efi.c:337:13: error: redefinition of ‘sysfb_apply_efi_quirks’
__init void sysfb_apply_efi_quirks(struct platform_device *pd)
^~~~~~~~~~~~~~~~~~~~~~
In file included from ../drivers/firmware/efi/sysfb_efi.c:26:0:
../include/linux/sysfb.h:65:20: note: previous definition of ‘sysfb_apply_efi_quirks’ was here
static inline void sysfb_apply_efi_quirks(struct platform_device *pd)
^~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-next@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727050447.7339-1-rdunlap@infradead.org
|
|
The Generic System Framebuffers support is built when the COMPILE_TEST
option is enabled. But this wrongly assumes that all the architectures
declare a struct screen_info.
This is true for most architectures, but at least the following do not:
arc, m68k, microblaze, openrisc, parisc and s390.
By attempting to make this compile testeable on all architectures, it
leads to linking errors as reported by the kernel test robot for parisc:
All errors (new ones prefixed by >>):
hppa-linux-ld: drivers/firmware/sysfb.o: in function `sysfb_init':
(.init.text+0x24): undefined reference to `screen_info'
>> hppa-linux-ld: (.init.text+0x28): undefined reference to `screen_info'
To prevent these errors only allow sysfb to be built on systems that are
going to need it, which are x86 BIOS and EFI.
The EFI Kconfig symbol is used instead of (ARM || ARM64 || RISC) because
some of these architectures only declare a struct screen_info if EFI is
enabled. And also, because the SYSFB code is only used for EFI on these
architectures. For !EFI the "simple-framebuffer" device is registered by
OF when parsing the Device Tree Blob (if a DT node for this was defined).
Fixes: d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727093015.1225107-1-javierm@redhat.com
|
|
Many of the DSI flags have names opposite to their actual effects,
e.g. MIPI_DSI_MODE_EOT_PACKET means that EoT packets will actually
be disabled. Fix this by including _NO_ in the flag names, e.g.
MIPI_DSI_MODE_NO_EOT_PACKET.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@samsung.com>
Reviewed-by: Xin Ji <xji@analogixsemi.com> # anx7625.c
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> # msm/dsi
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727094435.v3.1.I629b2366a6591410359c7fcf6d385b474b705ca2@changeid
|
|
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210726140001.24820-5-nikita.shubin@maquefel.me
|
|
Add vendor prefix for Shenzhen QiShenglong Industrialist Co., Ltd.
QiShenglong is a Chinese manufacturer of handheld gaming consoles, most of
which run (very old) versions of Linux.
QiShenglong is known as Hamy.
Signed-off-by: Artjom Vejsel <akawolf0@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210725221527.1771892-2-akawolf0@gmail.com
|
|
Add definition of the AUO B133HAN05.4 13.3" FHD panel and the
B140HAN06.4 14.0" FHD panel.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210726173300.432039-2-bjorn.andersson@linaro.org
|
|
Add bindings for the two AUO panels B133HAN05 and B140HAN06, both
1920x1080 panels with 16.7M colors, first being 13.3" and the latter
14.0".
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210726173300.432039-1-bjorn.andersson@linaro.org
|
|
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.
Fix this by checking whether 'pixclock' is zero first.
The following log reveals it:
[ 33.396850] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[ 33.396864] CPU: 5 PID: 11754 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #222
[ 33.396883] RIP: 0010:riva_load_video_mode+0x417/0xf70
[ 33.396969] Call Trace:
[ 33.396973] ? debug_smp_processor_id+0x1c/0x20
[ 33.396984] ? tick_nohz_tick_stopped+0x1a/0x90
[ 33.396996] ? rivafb_copyarea+0x3c0/0x3c0
[ 33.397003] ? wake_up_klogd.part.0+0x99/0xd0
[ 33.397014] ? vprintk_emit+0x110/0x4b0
[ 33.397024] ? vprintk_default+0x26/0x30
[ 33.397033] ? vprintk+0x9c/0x1f0
[ 33.397041] ? printk+0xba/0xed
[ 33.397054] ? record_print_text.cold+0x16/0x16
[ 33.397063] ? __kasan_check_read+0x11/0x20
[ 33.397074] ? profile_tick+0xc0/0x100
[ 33.397084] ? __sanitizer_cov_trace_const_cmp4+0x24/0x80
[ 33.397094] ? riva_set_rop_solid+0x2a0/0x2a0
[ 33.397102] rivafb_set_par+0xbe/0x610
[ 33.397111] ? riva_set_rop_solid+0x2a0/0x2a0
[ 33.397119] fb_set_var+0x5bf/0xeb0
[ 33.397127] ? fb_blank+0x1a0/0x1a0
[ 33.397134] ? lock_acquire+0x1ef/0x530
[ 33.397143] ? lock_release+0x810/0x810
[ 33.397151] ? lock_is_held_type+0x100/0x140
[ 33.397159] ? ___might_sleep+0x1ee/0x2d0
[ 33.397170] ? __mutex_lock+0x620/0x1190
[ 33.397180] ? trace_hardirqs_on+0x6a/0x1c0
[ 33.397190] do_fb_ioctl+0x31e/0x700
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-4-git-send-email-zheyuma97@gmail.com
|
|
The userspace program could pass any values to the driver through
ioctl() interface. if the driver doesn't check the value of 'pixclock',
it may cause divide error because the value of 'lineclock' and
'frameclock' will be zero.
Fix this by checking whether 'pixclock' is zero in kyrofb_check_var().
The following log reveals it:
[ 103.073930] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[ 103.073942] CPU: 4 PID: 12483 Comm: syz-executor Not tainted 5.14.0-rc2-00478-g2734d6c1b1a0-dirty #118
[ 103.073959] RIP: 0010:kyrofb_set_par+0x316/0xc80
[ 103.074045] Call Trace:
[ 103.074048] ? ___might_sleep+0x1ee/0x2d0
[ 103.074060] ? kyrofb_ioctl+0x330/0x330
[ 103.074069] fb_set_var+0x5bf/0xeb0
[ 103.074078] ? fb_blank+0x1a0/0x1a0
[ 103.074085] ? lock_acquire+0x3bd/0x530
[ 103.074094] ? lock_release+0x810/0x810
[ 103.074103] ? ___might_sleep+0x1ee/0x2d0
[ 103.074114] ? __mutex_lock+0x620/0x1190
[ 103.074126] ? trace_hardirqs_on+0x6a/0x1c0
[ 103.074137] do_fb_ioctl+0x31e/0x700
[ 103.074144] ? fb_getput_cmap+0x280/0x280
[ 103.074152] ? rcu_read_lock_sched_held+0x11/0x80
[ 103.074162] ? rcu_read_lock_sched_held+0x11/0x80
[ 103.074171] ? __sanitizer_cov_trace_switch+0x67/0xf0
[ 103.074181] ? __sanitizer_cov_trace_const_cmp2+0x20/0x80
[ 103.074191] ? do_vfs_ioctl+0x14b/0x16c0
[ 103.074199] ? vfs_fileattr_set+0xb60/0xb60
[ 103.074207] ? rcu_read_lock_sched_held+0x11/0x80
[ 103.074216] ? lock_release+0x483/0x810
[ 103.074224] ? __fget_files+0x217/0x3d0
[ 103.074234] ? __fget_files+0x239/0x3d0
[ 103.074243] ? do_fb_ioctl+0x700/0x700
[ 103.074250] fb_ioctl+0xe6/0x130
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-3-git-send-email-zheyuma97@gmail.com
|
|
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.
Fix this by checking whether 'pixclock' is zero first.
The following log reveals it:
[ 43.861711] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[ 43.861737] CPU: 2 PID: 11764 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #224
[ 43.861756] RIP: 0010:asiliantfb_check_var+0x4e/0x730
[ 43.861843] Call Trace:
[ 43.861848] ? asiliantfb_remove+0x190/0x190
[ 43.861858] fb_set_var+0x2e4/0xeb0
[ 43.861866] ? fb_blank+0x1a0/0x1a0
[ 43.861873] ? lock_acquire+0x1ef/0x530
[ 43.861884] ? lock_release+0x810/0x810
[ 43.861892] ? lock_is_held_type+0x100/0x140
[ 43.861903] ? ___might_sleep+0x1ee/0x2d0
[ 43.861914] ? __mutex_lock+0x620/0x1190
[ 43.861921] ? do_fb_ioctl+0x313/0x700
[ 43.861929] ? mutex_lock_io_nested+0xfa0/0xfa0
[ 43.861936] ? __this_cpu_preempt_check+0x1d/0x30
[ 43.861944] ? _raw_spin_unlock_irqrestore+0x46/0x60
[ 43.861952] ? lockdep_hardirqs_on+0x59/0x100
[ 43.861959] ? _raw_spin_unlock_irqrestore+0x46/0x60
[ 43.861967] ? trace_hardirqs_on+0x6a/0x1c0
[ 43.861978] do_fb_ioctl+0x31e/0x700
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-2-git-send-email-zheyuma97@gmail.com
|
|
When a property has the type DRM_MODE_PROP_BITMASK, the value field
stores a bitshift, not a bitmask, which can be surprising.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/NUZTPTKKZtAlDhxIXFB1qrUqWBYKapkBxCnb1S1bc3g@cp3-web-033.plabs.ch
|
|
Linux 5.14-rc3
Daniel said we should pull the nouveau fix from fixes in here, probably
a good plan.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
|
|
Like many free software projects, freedesktop.org issued a non-binding
recommendation for projects to migrate from Freenode to OFTC [1]. As
such, freedesktop.org entries in the MAINTAINERS file are out-of-date as
the respective channels have moved. Update the file to point to the
right network.
v2: Correct typo in commit message pointed out by Lukas and Jonathan.
Add Hector's ack.
v3: Add acks.
[1] https://lists.freedesktop.org/archives/dri-devel/2021-May/307605.html
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Hector Martin <marcan@marcan.st>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210725150007.2818-2-alyssa@rosenzweig.io
|
|
Like many free software projects, Nouveau recently moved from Freenode
to OFTC. Update the reference.
v3: Add acks.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210725150007.2818-1-alyssa@rosenzweig.io
|
|
gcc doesn't care, but clang quite reasonably pointed out that the recent
commit e9ba16e68cce ("smpboot: Mark idle_init() as __always_inlined to
work around aggressive compiler un-inlining") did some really odd
things:
kernel/smpboot.c:50:20: warning: duplicate 'inline' declaration specifier [-Wduplicate-decl-specifier]
static inline void __always_inline idle_init(unsigned int cpu)
^
which not only has that duplicate inlining specifier, but the new
__always_inline was put in the wrong place of the function definition.
We put the storage class specifiers (ie things like "static" and
"extern") first, and the type information after that. And while the
compiler may not care, we put the inline specifier before the types.
So it should be just
static __always_inline void idle_init(unsigned int cpu)
instead.
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix guest to host memory corruption in H_RTAS due to missing nargs
check.
- Fix guest triggerable host crashes due to bad handling of nested
guest TM state.
- Fix possible crashes due to incorrect reference counting in
kvm_arch_vcpu_ioctl().
- Two commits fixing some regressions in KVM transactional memory
handling introduced by the recent rework of the KVM code.
Thanks to Nicholas Piggin, Alexey Kardashevskiy, and Michael Neuling.
* tag 'powerpc-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state
KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak
KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash
KVM: PPC: Book3S HV P9: Fix guest TM support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of timer related fixes:
- Plug a race between rearm and process tick in the posix CPU timers
code
- Make the optimization to avoid recalculation of the next timer
interrupt work correctly when there are no timers pending"
* tag 'timers-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix get_next_timer_interrupt() with no timers pending
posix-cpu-timers: Fix rearm racing against process tick
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 jump label fix from Thomas Gleixner:
"A single fix for jump labels to prevent the compiler from agressive
un-inlining which results in a section mismatch"
* tag 'locking-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_labels: Mark __jump_label_transform() as __always_inlined to work around aggressive compiler un-inlining
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
"A set of EFI fixes:
- Prevent memblock and I/O reserved resources to get out of sync when
EFI memreserve is in use.
- Don't claim a non-existing table is invalid
- Don't warn when firmware memory is already reserved correctly"
* tag 'efi-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/mokvar: Reserve the table only if it is in boot services data
efi/libstub: Fix the efi_load_initrd function description
firmware/efi: Tell memblock about EFI iomem reservations
efi/tpm: Differentiate missing and invalid final event log table.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fix from Thomas Gleixner:
"A single update for the boot code to prevent aggressive un-inlining
which causes a section mismatch"
* tag 'core-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smpboot: Mark idle_init() as __always_inlined to work around aggressive compiler un-inlining
|
|
Pull dma-mapping fix from Christoph Hellwig:
- handle vmalloc addresses in dma_common_{mmap,get_sgtable} (Roman
Skakun)
* tag 'dma-mapping-5.14-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: handle vmalloc addresses in dma_common_{mmap,get_sgtable}
|
|
SoCs like the rk3288 and rk3399 have 3 mipi dphys on them. One is TX-
only, one is RX-only and one can be configured to do either TX or RX.
The RX phy is statically connected to the first Image Signal Processor,
the TX phy is statically connected to the first DSI controller and
the TXRX phy is connected to both the second DSI controller as well
as the second ISP.
The RX dphy is controlled externally through registers in the "General
Register Files", while the other two are controlled through the
"Configuration and Test Interface" inside their DSI controller's
io-memory area.
The Rockchip dw-dsi controller already controls these dphys for the
TX case in the driver, but when we want to also allow configuration
for RX to the ISP from the media subsystem we need to expose phy-
functionality instead.
So add a bit of infrastructure to allow the dsi driver to work as a
phy and make sure it can be only one or the other at a time.
Similarly as the dsi-controller will be part of the drm-graph when
active, add an empty component to the drm-graph when in phy-mode
to make the rest of the drm-graph not wait for it.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Tested-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210210111020.2476369-4-heiko@sntech.de
|
|
The Rockchip DSI controller on some SoCs also controls a bidrectional
dphy, which would be connected to an Image Signal Processor as a phy
in the rx configuration.
So allow a #phy-cells property for the dsi controller.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210210111020.2476369-3-heiko@sntech.de
|
|
In a followup patch, we'll need to access the pclk ourself to enable some
functionality, so get and store it in the rockchip dw-dsi variant as well.
Clocks are refcounted, so possible cascading enablements are
no problem.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Tested-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210210111020.2476369-2-heiko@sntech.de
|
|
Convert the Solomon SSD1307 Framebuffer Device Tree binding
documentation to json-schema.
Fix the spelling of the "pwms" property.
Document default values.
Make properties with default values not required.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714145122.2530176-1-geert@linux-m68k.org
|
|
As nwl_dsi.lanes is u32, and NSEC_PER_SEC is 1000000000L, the second
multiplication in
dsi->lanes * 8 * NSEC_PER_SEC
will overflow on a 32-bit platform. Fix this by making the constant
unsigned long long, forcing 64-bit arithmetic.
As iMX8 is arm64, this driver is currently used on 64-bit platforms
only, where long is 64-bit, so this cannot happen. But the issue will
start to happen when the driver is reused for a 32-bit SoC (e.g.
i.MX7ULP), or when code is copied for a new driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ebb82941a86b4e35c4fcfb1ef5a5cfad7c1fceab.1626255956.git.geert+renesas@glider.be
|
|
Add Logictechno and Multi-Inno panels:
- Logic Technologies LTTD800x480 L2RT 7" 800x480 TFT Resistive Touch Module
- Logic Technologies LTTD800480070-L6WH-RT 7” 800x480 TFT Resistive Touch Module
- Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714045349.10963-2-o.rempel@pengutronix.de
|
|
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
v3:
* return error if (ret < 0) (Geert)
* remove duplicate error message (Geert)
v2:
* handle errors in platform_get_irq() (Geert, Sergei)
* store IRQ number in struct shmob_drm_device (Laurent)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720080941.23646-1-tzimmermann@suse.de
|
|
Pull cifs fixes from Steve French:
"Five cifs/smb3 fixes, including a DFS failover fix, two fallocate
fixes, and two trivial coverity cleanups"
* tag '5.14-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix fallocate when trying to allocate a hole.
CIFS: Clarify SMB1 code for POSIX delete file
CIFS: Clarify SMB1 code for POSIX Create
cifs: support share failover when remounting
cifs: only write 64kb at a time when fallocating a small region of a file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- properly set the memory size, which fixes 32-bit systems
- allow initrd to load anywhere in memory, rather that restricting it
to the first 256MiB
- fix the 'mem=' parameter on 64-bit systems to properly account for
the maximum supported memory now that the kernel is outside the
linear map
- avoid installing mappings into the last 4KiB of memory, which
conflicts with error values
- avoid the stack from being freed while it is being walked
- a handful of fixes to the new copy to/from user routines
* tag 'riscv-for-linus-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: __asm_copy_to-from_user: Fix: Typos in comments
riscv: __asm_copy_to-from_user: Remove unnecessary size check
riscv: __asm_copy_to-from_user: Fix: fail on RV32
riscv: __asm_copy_to-from_user: Fix: overrun copy
riscv: stacktrace: pin the task's stack in get_wchan
riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE
riscv: Make sure the linear mapping does not use the kernel mapping
riscv: Fix memory_limit for 64-bit kernel
RISC-V: load initrd wherever it fits into memory
riscv: Fix 32-bit RISC-V boot failure
|
|
Commit 71f642833284 ("ACPI: utils: Fix reference counting in
for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer
that was possibly NULL. That fails miserably, because that helper
inline function is not set up to handle that case.
Just make acpi_dev_put() silently accept a NULL pointer, rather than
calling down to put_device() with an invalid offset off that NULL
pointer.
Link: https://lore.kernel.org/lkml/a607c149-6bf6-0fd0-0e31-100378504da2@kernel.dk/
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Daniel Scally <djrscally@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers, all of which can lead to user visible
problems in certain situations"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Fix NULL dereference on XCOPY completion
scsi: mpt3sas: Transition IOC to Ready state during shutdown
scsi: target: Fix protect handling in WRITE SAME(32)
scsi: iscsi: Fix iface sysfs attr detection
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a memory leak due to a race condition in io_init_wq_offload
(Yang)
- Poll error handling fixes (Pavel)
- Fix early fdput() regression (me)
- Don't reissue iopoll requests off release path (me)
- Add a safety check for io-wq queue off wrong path (me)
* tag 'io_uring-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
io_uring: explicitly catch any illegal async queue attempt
io_uring: never attempt iopoll reissue from release path
io_uring: fix early fdput() of file
io_uring: fix memleak in io_init_wq_offload()
io_uring: remove double poll entry on arm failure
io_uring: explicitly count entries for poll reqs
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- tracing fix (Keith Busch)
- fix multipath head refcounting (Hannes Reinecke)
- Write Zeroes vs PI fix (me)
- drop a bogus WARN_ON (Zhihao Cheng)
- Increase max blk-cgroup policy size, now that mq-deadline
uses it too (Oleksandr)
* tag 'block-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
nvme: set the PRACT bit when using Write Zeroes with T10 PI
nvme: fix nvme_setup_command metadata trace event
nvme: fix refcounting imbalance when all paths are down
nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING
block: increase BLKCG_MAX_POLS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Poll for MCF
misc: eeprom: at24: Always append device id even if label property is set.
|
|
Merge misc mm fixes from Andrew Morton:
"15 patches.
VM subsystems affected by this patch series: userfaultfd, kfence,
highmem, pagealloc, memblock, pagecache, secretmem, pagemap, and
hugetlbfs"
* akpm:
hugetlbfs: fix mount mode command line processing
mm: fix the deadlock in finish_fault()
mm: mmap_lock: fix disabling preemption directly
mm/secretmem: wire up ->set_page_dirty
writeback, cgroup: do not reparent dax inodes
writeback, cgroup: remove wb from offline list before releasing refcnt
memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions
mm: page_alloc: fix page_poison=1 / INIT_ON_ALLOC_DEFAULT_ON interaction
mm: use kmap_local_page in memzero_page
mm: call flush_dcache_page() in memcpy_to_page() and memzero_page()
kfence: skip all GFP_ZONEMASK allocations
kfence: move the size check to the beginning of __kfence_alloc()
kfence: defer kfence_test_init to ensure that kunit debugfs is created
selftest: use mmap instead of posix_memalign to allocate memory
userfaultfd: do not untag user pointers
|
|
Fixing typos and grammar mistakes and using more intuitive label
name.
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
Fixes: ca6eaaa210de ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Clean up:
The size of 0 will be evaluated in the next step. Not
required here.
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
Fixes: ca6eaaa210de ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Had a bug when converting bytes to bits when the cpu was rv32.
The a3 contains the number of bytes and multiple of 8
would be the bits. The LGREG is holding 2 for RV32 and 3 for
RV32, so to achieve multiple of 8 it must always be constant 3.
The 2 was mistakenly used for rv32.
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
Fixes: ca6eaaa210de ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
There were two causes for the overrun memory access.
The threshold size was too small.
The aligning dst require one SZREG and unrolling word copy requires
8*SZREG, total have to be at least 9*SZREG.
Inside the unrolling copy, the subtracting -(8*SZREG-1) would make
iteration happening one extra loop. Proper value is -(8*SZREG).
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
Fixes: ca6eaaa210de ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
In commit 32021982a324 ("hugetlbfs: Convert to fs_context") processing
of the mount mode string was changed from match_octal() to fsparam_u32.
This changed existing behavior as match_octal does not require octal
values to have a '0' prefix, but fsparam_u32 does.
Use fsparam_u32oct which provides the same behavior as match_octal.
Link: https://lkml.kernel.org/r/20210721183326.102716-1-mike.kravetz@oracle.com
Fixes: 32021982a324 ("hugetlbfs: Convert to fs_context")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Dennis Camera <bugs+kernel.org@dtnr.ch>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 63f3655f9501 ("mm, memcg: fix reclaim deadlock with writeback")
fix the following ABBA deadlock by pre-allocating the pte page table
without holding the page lock.
lock_page(A)
SetPageWriteback(A)
unlock_page(A)
lock_page(B)
lock_page(B)
pte_alloc_one
shrink_page_list
wait_on_page_writeback(A)
SetPageWriteback(B)
unlock_page(B)
# flush A, B to clear the writeback
Commit f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault()
codepaths") reworked the relevant code but ignored this race. This will
cause the deadlock above to appear again, so fix it.
Link: https://lkml.kernel.org/r/20210721074849.57004-1-zhengqi.arch@bytedance.com
Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 832b50725373 ("mm: mmap_lock: use local locks instead of
disabling preemption") fixed a bug by using local locks.
But commit d01079f3d0c0 ("mm/mmap_lock: remove dead code for
!CONFIG_TRACING configurations") changed those lines back to the
original version.
I guess it was introduced by fixing conflicts.
Link: https://lkml.kernel.org/r/20210720074228.76342-1-songmuchun@bytedance.com
Fixes: d01079f3d0c0 ("mm/mmap_lock: remove dead code for !CONFIG_TRACING configurations")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
