| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
First set of new device support, fixes, cleanups and features for IIO in 5.18
This cycle we had quite a few series that applied similar changes
to lots of drivers. To keep this description manageable I have
called those out in their own section rather than per driver.
Particularly pleased to see the long running AFE precision series
going in this cycle.
Series includes some late breaking fixes.
New device support
* adi,ada4250 amplifier
- New driver and dt bindings for this programmable gain amplifier.
* adi,admv1014 microwave down-converter
- New driver, dt bindings and some device specific ABI that
may be generalized as more drivers for devices similar to this
are added.
* adi,admv4420 K Band down-converter.
- New driver and dt bindings.
* adi,adxl367 accelerometer driver.
- New driver, dt-bindings + some new IIO ABI definitions to support
reference magnitude events where an estimate of the acceleration
due to gravity has been removed.
- A few fixes as follow up patches.
* adi,ltc2688 DAC with toggle and dither modes.
- New driver and bindings. Includes some new driver specific (for now)
ABI for handling toggle mode and the addition of a dither waveform to
the DAC output.
* AFE (analog front end) add support for additional types of analog device
in front of an ADC.
- RTD temperature sensors with dt bindings.
- Temperature transducers wit dt bindings.
- Related cleanup and features listed in other sections below.
* maxim,ds3502 potentiometer.
- Add support to ds1803 driver which required significant rework.
* mediatek,mt2701-auxadc driver
- Add mediatek,mt8186-auxadc - id table and chip specific info only.
* semtech,sx9324, semtech,ax9360
- Substantial refactoring of sx9310 to extract core logic for reuse
into a separate module
- New driver using this supporting sx9324 proximity sensors.
- New driver using this supporting sx9360 proximity sensors.
* silan,sc7a20
- Compatible with the st,lis2dh (or nearly anyway) so add ID and
chip specific info to enable support. Also silan vendor ID added
for dt-bindings.
Staging graduation
* adi,ad7280a monitoring ADC for stacked lithium-ion batteries in
electric cars and similar.
- Substantial rework of driver required to bring inline with current
IIO best practice. An unusual device in IIO so some interesting features
we may see more of in future.
Multiple driver/core cleanup
- Use sysfs_emit() in simple locations where there is no path to change
to various core created attributes.
- Trivial white space fixes around inconsistency between space after { and
before } in id tables.
- Introduce new handling for fractional types to avoid repeated similar
implementations. Use this in 3 drivers. Note this is also targeted
at future use in the AFE driver and was motivated by discussions
around the precision related work on that driver.
- of related header cleanups - drop of*.h and add mod_devicetable.h as
appropriate.
- Move a number of symbol exports into IIO_* namespaces. Two categories,
1) Library used by multiple drivers e.g. st_sensors
2) Core driver module exporting functions used by bus specific modules.
A few related cleanups in this set.
- Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and
similar to simplify drivers and take advantage of these new macros
allowing the compiler to do the job or removing unused code without
the need for __maybe_unused markings. Conversion of other drivers to
these new macros ongoing.
Features
* adi,adf4350
- Switch from of specific to generic device properties enabling use with
other firmware types.
* adi,adx345
- Switch from of specific to generic device properties.
- Add ACPI ID ADS0345
- Related driver cleanup.
* adi,hmc425a
- Switch from of specific to generic device properties.
* afe analog rescaler driver
- Wider range of types supported for scale.
- Support offset.
- Kunit tests.
* atlas,ezo-sensor
- Convert from of to device properties.
* fsl,mma8452
- Support mount matrix.
* infineon,dps310:
- Add ACPI ID IFX3100.
* invensense,mpu6050
- Convert to generic device properties.
* maxim,ds1803
- Add out_raw_available before supporting more devices.
- Convert from of specific to device properties.
* samsung,ssp_sensors
- Convert from of specific to device properties.
* st,stm32-timer trigger
- Convert from of specific to device properties.
* ti,hdc101x
- Add ACPI ID TXNW1010.
* ti,tsc2046:
- Add read_raw support to enable use of iio_hwmon and similar.
Fixes / cleanup.
* mailmap
- Update for Cai Huoqing
* MAINTAINERS
- Fix Analog Devices related links.
- Add entry for ADRF6780
- Add entry for ADMV1013
- Add entry for AD7293
- Add entry for ADMV8818
- Update files listed for adis-lib
* iio core:
- Fix wrong comment about current_mode being something a driver should
ever access.
- Use struct_size() rather than open coding in industrialio-hw-consumer
* adi,axl355
- Use units.h definitions instead of local versions.
* adi,adis-lib
- Simplify *updated_bits() macro
- Whitespace cleanup.
* afe - Note many of these fixes only apply to particular configurations
so the problems have probably not been seen in the wild, but will be
visible with new usecases enabled this cycle.
- Fix application of consumer scale for IIO_VAL_INT.
- Apply a scale of 1 when no scale is provided.
- Make best effort to establish a valid offset value for fractional
cases.
- Use s64 for scale calculations where parameters may be signed.
- Tidy up include order.
- Improve accuracy for small fractional sales
- Reduce risk of integer overflow.
* ams,as3935
- Use devm_delayed_work_autocancel() to replace open coded equivalent.
* aspeed,adc
- Fix wrong use of divider flag.
* atmel,sama5d2-adc
- Relax atmel,trigger-edge-type to optional.
- Drop Ludovic Desroches from listed maintainers of the dt-binding
inline with previous MAINTAINERS entry update.
* fsl,mma8452
- Fix probing when i2c_device_id used.
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead. Note the original path in here
worked more by luck than design.
* invensense,mpu6050
- Drop ACPI_PTR() protection to avoid an unused warning.
- Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to
simplify handling.
* motorola,cpcap-adc
- Drop unused assignment.
* qcom,spmi-adc
- Fix wrong example of 'reg' in binding document.
* renesas,rzg2l-adc
- Trivial typo fix.
* semtech,sx9360
- Fix wrong register handling for event generation.
* st_sensors
- Allow manual disabling of I2C or SPI module if not needed for a particular
board. Default is still to enable the bus specific module if
appropriate bus is supported.
* st,lsm6dsx
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead.
* ti,palmas-gpadc
- Split the interrupt fields in the dt-binding example
* ti,tsc2046
- Rework state machine to improve readability after recent debugging of
an issue fixed elsewhere.
- Add a sanity check to avoid very large memory allocations if a crazy
delay is specified.
* ti,twl6030
- Add error handling if devm_request_threaded_irq() fails.
* xilinx,ams
- Use devm_delayed_work_autocancel() instead of open coding equivalent.
- Fix missing required clock entry in dt-binding.
- Fix miss counting of channels resulting in ps channels not
being enabled.
- Fix incorrect values written to sequencer registers.
- Fix sequence for single channel reading.
* tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits)
iio: adc: xilinx-ams: Fix single channel switching sequence
iio: adc: xilinx-ams: Fixed wrong sequencer register settings
iio: adc: xilinx-ams: Fixed missing PS channels
dt-bindings: iio: adc: zynqmp_ams: Add clock entry
iio: accel: mma8452: use the correct logic to get mma8452_data
iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct
dt-bindings: iio: Add ltc2688 documentation
iio: ABI: add ABI file for the LTC2688 DAC
iio: dac: add support for ltc2688
dt-bindings: iio: afe: add bindings for temperature transducers
dt-bindings: iio: afe: add bindings for temperature-sense-rtd
iio: afe: rescale: add temperature transducers
iio: afe: rescale: add RTD temperature sensor support
iio: test: add basic tests for the iio-rescale driver
iio: afe: rescale: reduce risk of integer overflow
iio: afe: rescale: fix accuracy for small fractional scales
iio: afe: rescale: add offset support
iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
iio: afe: rescale: expose scale processing function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 5.18
These are the interconnect changes for the 5.18-rc1 merge window
consisting of minor framework and driver updates.
Core changes:
- Added stubs for the bulk API to expand compile testing coverage.
Driver changes:
- imx: Implemented get_bw() function to get initial avg/peak bandwidth.
- msm8939: Fix ioremap collision for snoc-mm.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Add stubs for the bulk API
interconnect: qcom: msm8939: Remove snoc_mm specific regmap
dt-bindings: interconnect: Convert snoc-mm to a sub-node of snoc
interconnect: imx: Add imx_icc_get_bw function to set initial avg and peak
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next
Vinod writes:
phy-for-5.18
- New support:
- Mediatek tphy support for MT8186
- Qualcomm usb phy support for sc8180x and sc8280xp
- Qualcomm ufs phy support for sc8180x and sc8280xp
- Qualcomm usb phy support for MSM8953
- Cadence D-Phy Rx support
- Sun4i support for USB phy
- Rockchip naneng combo phy support for RK3568
- Qualcomm eDP PHY for sc7280
- Updates:
- wake on support for Synopsis XHCI controllers
- Yamilify Qualcomm USB HS phy binding
- Charger detection support for TI tusb1210
* tag 'phy-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (53 commits)
phy: qcom-qmp: add sc8280xp UFS PHY
dt-bindings: phy: qcom,qmp: add sc8180x and sc8280xp ufs compatibles
phy: qcom-snps: Add sc8280xp support
dt-bindings: phy: qcom,usb-snps-femto-v2: Add sc8180x and sc8280xp
dt-bindings: Revert "dt-bindings: soc: grf: add naneng combo phy register compatible"
phy: dt-bindings: Add Cadence D-PHY Rx bindings
phy: dt-bindings: cdns,dphy: add power-domains property
phy: dt-bindings: Convert Cadence DPHY binding to YAML
phy: cadence: Add Cadence D-PHY Rx driver
dt-bindings: phy: renesas,usb2-phy: Document RZ/V2L phy bindings
Revert "PCI: aardvark: Fix initialization with old Marvell's Arm Trusted Firmware"
Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720"
Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720"
phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation
phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver configuration
phy: phy-brcm-usb: fixup BCM4908 support
dt-bindings: phy: mediatek,tphy: Add compatible for MT8192
phy: ti: tusb1210: Add charger detection
phy: ti: tusb1210: Add a delay between power-on and restoring the phy-parameters
phy: ti: tusb1210: Drop tusb->vendor_specific2 != 0 check from tusb1210_power_on()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for 5.17-rc1
- stream handling refactoring and renaming to make it consistent
in the core
- runtime pm suport for qcom driver
- in band wake up interrupt support for qcom driver
* tag 'soundwire-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (27 commits)
soundwire: qcom: use __maybe_unused for swrm_runtime_resume()
soundwire: qcom: constify static struct qcom_swrm_data global variables
soundwire: qcom: add in-band wake up interrupt support
dt-bindings: soundwire: qcom: document optional wake irq
soundwire: qcom: add runtime pm support
soundwire: stream: make enable/disable/deprepare idempotent
soundwire: stream: sdw_stream_add_ functions can be called multiple times
soundwire: stream: introduce sdw_slave_rt_find() helper
soundwire: stream: separate alloc and config within sdw_stream_add_xxx()
soundwire: stream: move list addition to sdw_slave_alloc_rt()
soundwire: stream: rename and move master/slave_rt_free routines
soundwire: stream: group sdw_stream_ functions
soundwire: stream: split sdw_alloc_slave_rt() in alloc and config
soundwire: stream: move sdw_alloc_slave_rt() before 'master' helpers
soundwire: stream: split sdw_alloc_master_rt() in alloc and config
soundwire: stream: simplify sdw_alloc_master_rt()
soundwire: stream: group sdw_port and sdw_master/slave_port functions
soundwire: stream: add 'slave' prefix for port range checks
soundwire: stream: split alloc and config in two functions
soundwire: stream: split port allocation and configuration loops
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains habanalabs driver changes for v5.18:
- Add new feature of recording time-stamp when a completion
queue counter reaches a target value as determined by the
userspace application. This is used by the graph compiler
to accurately measure the time it takes for certain workloads
to execute, which helps to fine-tune future compilations.
- Add two new attributes to sysfs that expose the VRM and
f/w OS version
- Add a delay to the reset path that allows the driver to
receive and handle additional events from the f/w before
doing the reset. This can help when debugging why a reset
event was received from the f/w.
- Re-factor some of the sysfs code in the driver. Mainly,
move functions from hwmgr.c to more relevant files and
totally remove hwmgr.c file.
- Fix multiple bugs such as races, use-after-free, ignoring
error codes, etc.
- As usual, multiple minor changes and small fixes.
* tag 'misc-habanalabs-next-2022-02-28' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (50 commits)
habanalabs: remove deprecated firmware states
habanalabs: add an option to delay a device reset
habanalabs: Add check for pci_enable_device
habanalabs: Fix reset upon device release bug
habanalabs: make sure device mem alloc is page aligned
habanalabs/gaudi: add missing handling of NIC related events
habanalabs/gaudi: handle axi errors from NIC engines
habanalabs: allow user to set allocation page size
habanalabs: use kernel-doc for memory ioctl documentation
habanalabs: avoid using an uninitialized variable
habanalabs: set max power on device init per ASIC
habanalabs: use proper max_power variable for device utilization
habanalabs: enable stop-on-error debugfs setting per ASIC
habanalabs: change function to static
habanalabs: add missing include of vmalloc.h
habanalabs: fix use-after-free bug
habanalabs: rephrase error messages in PCI initialization
habanalabs: fix spelling mistake
habanalabs: Timestamps buffers registration
habanalabs: fix race when waiting on encaps signal
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
FPGA Manager changes for 5.18-rc1
Christophe's patch is part of a larger effort of removing the use of the
deprecated pci-dma-compat API.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of our for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: pci: Remove usage of the deprecated "pci-dma-compat.h" API
|
|
swrm_runtime_resume() would not be defined when CONFIG_PM=n
This causes below build failure
drivers/soundwire/qcom.c:1460:12: error: 'swrm_runtime_resume' defined
but not used [-Werror=unused-function]
Mark the resume swrm_runtime_resume() with __maybe_unused attribute.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220303110321.23666-1-srinivas.kandagatla@linaro.org
[redo commit title and log]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The qcom_swrm_data structures is only required for setting soundwire
params, so make the qcom_swrm_data structure const to allow the compiler
to put it in read-only memory and avoid unintentional modifications.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1646224982-3361-3-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some of the Qualcomm SoundWire Controller instances like the ones that are
connected to RX path along with Headset connections support Waking up
Controller from Low power clock stop state using SoundWire In-band interrupt.
SoundWire Slave on the bus would initiate this by pulling the data line high,
while the clock is stopped.
Add support to this wake up interrupt.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220228172528.3489-4-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Wake IRQ is optional interrupt that can be wired up on SoundWire controller
instances like RX path along with MBHC(Multi Button Headset connection).
Document this in bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220228172528.3489-3-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support to runtime PM using SoundWire clock stop Mode0 on supported
controller instances and soft reset on instances that do not support
clock stop.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220228172528.3489-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Reuse the SM8350 UFS PHY initialization sequence to add support for the
same found in the Qualcomm SC8280XP platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220225035105.2294599-2-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add compatible for the UFS PHY found in the Qualcomm SC8280XP platform
and document the required clocks for this and the SC8180X UFS PHY.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220225035105.2294599-1-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Qualcomm sc8280xp platform comes with a 5nm femto USB PHY which, in
contrast to previously seen platforms, has the SIDDQ bit in the COMMON0
register default to high.
So make the driver match on the 5nm compatible and make sure to clear
the SIDDQ bit on phy_init.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220225034049.2294207-2-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add compatible for the femto USB PHY found in sc8180x, sc8280xp and the
generic 5nm form of the latter.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220225034049.2294207-1-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
compatible"
This reverts commit b3df807e1fb0 ("dt-bindings: soc: grf: add naneng
combo phy register compatible") as that was wrongly merged, so better to
drop the wrong patch
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220302143427.447748-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Rx mode DPHY is different from Tx mode DPHY. Add a separate binding
for it.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220301111621.2992275-5-p.yadav@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This property is needed on TI platforms to enable the PD of the DPHY
before it can be used.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220301111621.2992275-4-p.yadav@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert Cadence DPHY binding to YAML.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220301111621.2992275-3-p.yadav@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Cadence D-PHY can be configured in Tx (DSI) mode or Rx (CSI) mode.
Both modes have a different programming sequence and share little among
them. In addition, a PHY configured in Tx mode cannot be used in Rx mode
and vice versa. For this reason, create a separate driver for the Rx
mode to make it easier to read and maintain.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220301111621.2992275-2-p.yadav@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document USB phy bindings for RZ/V2L SoC. RZ/V2L USB phy is identical to
one found on the RZ/G2L SoC. No driver changes are required as generic
compatible string "renesas,rzg2l-usb2-phy" will be used as a fallback.
While at it, drop the comment "RZ/G2L family" for "renesas,rzg2l-usb2-phy"
compatible string as this will avoid changing the line for every new SoC
addition.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220301124255.16836-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some of the AMS channels need to be read by switching into single-channel
mode from the normal polling sequence. There was a logic issue in this
switching code that could cause the first read of these channels to read
back as zero.
It appears that the sequencer should be set back to default mode before
changing the channel selection, and the channel should be set before
switching the sequencer back into single-channel mode.
Also, write 1 to the EOC bit in the status register to clear it before
waiting for it to become set, so that we actually wait for a new
conversion to complete, and don't proceed based on a previous conversion
completing.
Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20220127173450.3684318-5-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Register settings used for the sequencer configuration register
were incorrect, causing some inputs to not be read properly.
Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20220127173450.3684318-4-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The code forgot to increment num_channels for the PS channel inputs,
resulting in them not being enabled as they should.
Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20220127173450.3684318-3-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AMS driver DT binding was missing the clock entry, which is actually
mandatory according to the driver implementation. Add this in.
Fixes: 39dd2d1e251d ("dt-bindings: iio: adc: Add Xilinx AMS binding documentation")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20220127173450.3684318-2-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The original logic to get mma8452_data is wrong, the *dev point to
the device belong to iio_dev. we can't use this dev to find the
correct i2c_client. The original logic happen to work because it
finally use dev->driver_data to get iio_dev. Here use the API
to_i2c_client() is wrong and make reader confuse. To correct the
logic, it should be like this
struct mma8452_data *data = iio_priv(dev_get_drvdata(dev));
But after commit 8b7651f25962 ("iio: iio_device_alloc(): Remove
unnecessary self drvdata"), the upper logic also can't work.
When try to show the avialable scale in userspace, will meet kernel
dump, kernel handle NULL pointer dereference.
So use dev_to_iio_dev() to correct the logic.
Dual fixes tags as the second reflects when the bug was exposed, whilst
the first reflects when the original bug was introduced.
Fixes: c3cdd6e48e35 ("iio: mma8452: refactor for seperating chip specific data")
Fixes: 8b7651f25962 ("iio: iio_device_alloc(): Remove unnecessary self drvdata")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1645497741-5402-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The formula for the ADC sampling period in ast2400/ast2500 is:
ADC clock period = PCLK * 2 * (ADC0C[31:17] + 1) * (ADC0C[9:0])
When ADC0C[9:0] is set to 0 the sampling voltage will be lower than
expected, because the hardware may not have enough time to
charge/discharge to a stable voltage. This patch use the flag
CLK_DIVIDER_ONE_BASED which will use the raw value read from the
register, with the value of zero considered invalid to conform to the
corrected formula.
Fixes: 573803234e72 ("iio: Aspeed ADC")
Reported-by: Konstantin Klubnichkin <kitsok@yandex-team.ru>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220221012705.22008-1-billy_tsai@aspeedtech.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
dev_get_drvdata() on iio_dev->dev no longer returns the iio_dev.
Use dev_to_iio_dev() to get iio_dev struct.
Fixes: 8b7651f25962 ("iio: iio_device_alloc(): Remove unnecessary self drvdata")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/1645702191-9400-1-git-send-email-haibo.chen@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document the LTC2688 devicetree properties.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220225130129.69-4-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Define the sysfs interface for toggle or dither capable channels. Dither
capable channels will have the extended interface:
* out_voltageY_dither_en
* out_voltageY_dither_raw
* out_voltageY_dither_offset
* out_voltageY_dither_raw_available
* out_voltageY_dither_frequency
* out_voltageY_dither_frequency_available
* out_voltageY_dither_phase
* out_voltageY_dither_phase_available
Toggle enabled channels will have:
* out_voltageY_toggle_en
* out_voltageY_raw0
* out_voltageY_raw1
* out_voltageY_symbol
The common interface present in all channels is:
* out_voltageY_raw (not present in toggle enabled channels)
* out_voltageY_raw_available
* out_voltageY_powerdown
* out_voltageY_scale
* out_voltageY_offset
* out_voltageY_calibbias
* out_voltageY_calibscale
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220225130129.69-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The LTC2688 is a 16 channel, 16 bit, +-15V DAC with an integrated
precision reference. It is guaranteed monotonic and has built in
rail-to-rail output buffers that can source or sink up to 20 mA.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220225130129.69-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The struct device *dev, is no longer needed at various functions, let's
therefore drop it to fix the build errors/warnings.
Fixes: 7570fb41e450 ("mmc: rtsx: Let MMC core handle runtime PM")
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220301115300.64332-1-ulf.hansson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Booting msm8939 on tip-of-tree I encountered the following error.
[ 1.212340] qnoc-msm8939 580000.interconnect_mm: can't request region for resource [mem 0x00580000-0x0059407f]
[ 1.212391] qnoc-msm8939 580000.interconnect_mm: Cannot ioremap interconnect bus resource
[ 1.221524] qnoc-msm8939: probe of 580000.interconnect_mm failed with error -16
Initially I thought this was a bug with the interconnect driver but,
examining it a bit more I realized the DTS I was working with based on
downstream, declares snoc and snoc_mm as existing at the same address
range.
When we were developing the DTS for 8939 we weren't using the common rpm
interconnect driver so we never saw the ioremap collision.
Taking a hard look at the qcom documentation as well as the downstream code
we see that yes downstream declares snoc and snoc_mm separately but, also
at the same overlapping address.
The qcom documentation for performance points for msm8936/msm8939 snoc,
deliniates snoc_mm as simply two new performance-points i.e. a faster GPLL0
vote associated with new multi-media devices attached to the snoc.
In other words the snoc had two new RPM vote indices added to it, to
represent the higher performance clocks, should one of the multi-media IP
blocks call for it.
We can fix the ioremap collision and still represent the two higher
performance point clock votes by coalsecing snoc and snoc_mm into snoc. The
DTS clock references will take care of the appropriate votes.
V2:
Made snoc-mm into a child of snoc - Dmitry
Removes redundant msm8939_snoc_mm_regmap_config - bod
Link: https://lore.kernel.org/r/20220129032735.2410936-1-bryan.odonoghue@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add stub functions for the bulk API to allow compile testing.
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220301090735.26599-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
This reverts commit d0cac2434c8ecd4863e082d976f5db9405d14b80. THe MFD
maintainer has some remaining objections that need to be resolved before
it can be accepted.
Link: https://lore.kernel.org/r/20220228193928.3ec6ee98@canb.auug.org.au
Reported-by: Lee Jones <lee.jones@linaro.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ba0b3eb131f1..be1ad8ce54aa 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -297,6 +297,17 @@ config MFD_ASIC3
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
+config MFD_TN48M_CPLD
+ tristate "Delta Networks TN48M switch CPLD driver"
+ depends on I2C
+ depends on ARCH_MVEBU || COMPILE_TEST
+ select MFD_SIMPLE_MFD_I2C
+ help
+ Select this option to enable support for Delta Networks TN48M switch
+ CPLD. It consists of reset and GPIO drivers. CPLD provides GPIOS-s
+ for the SFP slots as well as power supply related information.
+ SFP support depends on the GPIO driver being selected.
+
config PMIC_DA903X
bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
depends on I2C=y
diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
index 51536691ad9d..0d6a51ed6286 100644
--- a/drivers/mfd/simple-mfd-i2c.c
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -64,6 +64,7 @@ static int simple_mfd_i2c_probe(struct i2c_client *i2c)
static const struct of_device_id simple_mfd_i2c_of_match[] = {
{ .compatible = "kontron,sl28cpld" },
+ { .compatible = "delta,tn48m-cpld" },
{}
};
MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
|
|
During driver and F/W handshake, driver waits for F/W to reach
certain states in order to progress with the boot flow.
Some of the states were deprecated a long time ago and were never
present on official firmwares. Therefore, let's remove them from
the handshake process.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Several H/W events can be sent adjacently, even due to a single error.
If a hard-reset is triggered as part of handling one of these events,
the following events won't be handled.
The debug info from these missed events is important, sometimes even
more important than the one that was handled.
To allow handling these close events, add an option to delay a device
reset and use it when resetting due to H/W events.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
As the potential failure of the pci_enable_device(),
it should be better to check the return value and return
error if fails.
Fixes: 70b2f993ea4a ("habanalabs: create common folder")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In case user application was interrupted while some cs still in-flight
or in the middle of completion handling in driver, the
last refcount of the kernel private data for the user process
will not be put in the fd close flow, but in the cs completion
workqueue context.
This means that the device reset-upon-device-release will be called
from that context. During the reset flow, the driver flushes all the cs
workqueue to ensure that any scheduled work has run to completion,
and since we are running from the completion context we will
have deadlock.
Therefore, we need to skip flushing the workqueue in those cases.
It is safe to do it because the user won't be able to release the device
unless the workqueues are already empty.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Working with MMU that supports multiple page sizes requires that mapping
of a page of a certain size will be aligned to the same size (e.g. the
physical address of 32MB page shall be aligned to 32MB).
To achieve this the gen_poll allocation is now using the "align" variant
to comply with the alignment requirements.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
There are a few events that can arrive from the f/w and without proper
handling can cause errors to appear in the kernel log without reason.
Add the relevant handling that was missing.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Various AXI errors can occur in the NIC engines and are reported to
the driver by the f/w. Add code to print the errors and ack them to
the f/w.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In future ASICs the MMU will be able to work with multiple page sizes,
thus a new flag is added to allow the user to set the requested page
size.
This flag is added since the whole DRAM is allocated for the user and
the user also should be familiar with the memory usage use case.
As such, the user may choose to "over allocate" memory in favor of
performance (for instance- large page allocations covers more memory
in less TLB entries).
For example: say available page sizes are of 1MB and 32MB. If user
wants to allocate 40MB the user can either set page size to 1MB and
allocate the exact amount of memory (but will result in 40 TLB entries)
or the user can use 32MB pages, "waste" 8MB of physical memory but
occupy only 2 TLB entries.
Note that this feature will be available only to ASIC that supports
multiple DRAM page sizes.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Re-format the comments for the memory ioctl structure to be in
kernel-doc style.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Fix the following compilation warning in
hl_cb_ioctl() @ command_buffer.c:
warning: ‘device_va’ may be used uninitialized in this function
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
For current devices there is a need to send the max power value to F/W
during device init, for example because there might be several card
types.
In future devices, this info will be programmed in the device's EEPROM
and will be read by F/W, and hence the driver should not send it.
Modify the sending of the relevant message to be done only for ASIC
types that need it.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The max_power variable which is used for calculating the device
utilization is the ASIC specific property which is set during init.
However, the max value can be modified via sysfs, and thus the updated
value in the device structure should be used instead.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
On Goya and Gaudi, the stop-on-error configuration can be set via
debugfs. However, in future devices, this configuration will always be
enabled.
Modify the debugfs node to be allowed only for ASICs that support this
dynamic configuration.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
handle_registration_node() is called directly from the irq handler
in irq.c, so it can be static.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Use of vfree(), vmalloc_user(), vmalloc() and remap_vmalloc_range()
requires this include in some architectures.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
