aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-02drm/edid: Parse and handle HDMI deep color modes.Mario Kleiner
Check the HDMI cea block for deep color mode bits. If available, assign the highest supported bpc for a hdmi display, corresponding to the given deep color modes. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: Limit hdmi deep color bit depth to 12 bpc.Mario Kleiner
DCE-4/5/6 can't support more than 12 bpc deep color over hdmi, so clamp to 12 bpc when a hdmi deep color capable display is connected. This even makes sense on DCE-8+, which could do up to 16 bpc, as driving with more than 12 bpc would only waste video bandwidth as long as we don't support framebuffers with more than 12 bpc depth. On pre-DCE4 we clamp hdmi bit depth to 8 bpc, as those asics don't support hdmi deep color. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: Setup HDMI_CONTROL for hdmi deep color gcp's (v2)Alex Deucher
Program HDMI_CONTROL to send general control packets for hdmi deep color mode signalling at every video frame if bpc > 8. This is only supported on evergreen / DCE-4 and later. v2: rebase Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: fix pll setup for hdmi deep color (v7)Alex Deucher
Need to adjust the pll up for deep color modes. Additionally, the atom bpc defines were wrong in certain cases. v2: set the adjusted clock to the pll clock for hdmi deep color. This fixes display and audio issues with deep color as reported by Andy Furniss <adf.lists@gmail.com> v3: set crtc_clock as well v4: setcrtcinfo on the adjusted mode v5: just use the adjusted clock for setting the pll v6: only use the adjusted clock for hdmi v7: only DCE5 and DCE6 and bpc > 8 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: use hw cts/n values for deep colorAlex Deucher
I'm not really sure how these should be calculated for deep color. The hw generated values seem to work. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: only apply hdmi bpc pll flags when encoder mode is hdmiAlex Deucher
May fix display issues with non-HDMI displays. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-06-02drm/radeon/atom: fix dithering on certain panelsAlex Deucher
We need to specify the encoder mode as LVDS for eDP when using the Crtc_Source atom table in order to properly set up the FMT hardware. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73911 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-06-02drm/radeon: optimize CIK VM handling v2Christian König
Fill VM page tables from the GART page table if applicable. v2: fix copy&paste error Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: optimize SI VM handlingChristian König
Fill VM page tables from the GART page table if applicable. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: add define for flags used in R600+ GTTChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: rework page flip handling v3Christian König
Instead of trying to flip inside the vblank period when the buffer is idle, offload blocking for idle to a kernel thread and program the flip directly into the hardware. v2: add error handling, fix EBUSY handling v3: add proper exclusive_lock handling Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: separate vblank and pflip crtc handlingChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: split page flip and pending callbackChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: remove drm_vblank_get|put from pflip handlingChristian König
We activate the VBLANK irq manually anyway, so this is unnecessary. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: remove (pre|post)_page_flip callbacksChristian König
They are doing the same on all generations anyway. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon/dp: fix lane/clock setup for dp 1.2 capable devicesAlex Deucher
Only DCE5+ asics support DP 1.2. Noticed by ArtForz on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-06-02drm/radeon: fix typo in radeon_connector_is_dp12_capable()Alex Deucher
We were checking the ext clock rather than the display clock. Noticed by ArtForz on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-06-02radeon: Remove useless quirk for zx1/FireGL X1 combo introduced with fdo #7770Émeric MASCHINO
Removes useless quirk a7f465f73363fce409870f62173d518b1bc02ae6 introduced with fdo #7770 as a failed attempt to minimize stability issues with hp zx1 chipset/ ATI FireGL X1 graphics adapter configuration (see http://marc.info/?l=linux-ia64&m=140077543819871&w=2 for details/reason) Signed-off-by: Émeric MASCHINO <emeric.maschino@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02vgaswitcheroo: switch the mux to the igp on power down when runpm is enabledAlex Deucher
Avoids blank screens on muxed systems when runpm is active. bug: https://bugs.freedesktop.org/show_bug.cgi?id=75917 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-06-02drm/radeon: use NULL instead of zero in clearstate headersMichele CURTI
Signed-off-by: Michele Curti <michele.curti@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: use NULL instead of zero in object functionsMichele CURTI
Signed-off-by: Michele Curti <michele.curti@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon/hdmi: DCE2: simplify audio workaroundRafał Miłecki
Thanks to advanced RE of fglrx we finally know what exactly needs to be handled of AFMT change. This has been tested for possible regressions on: 1) DCE2 HD2400 (RV610) 2) DCE3 HD3470 (RV620) For a reference and details see: https://bugzilla.kernel.org/show_bug.cgi?id=76231 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon/hdmi: DCE2: update setmodeRafał Miłecki
Recent RE efforts revealed ops performed by fglrx during HDMI setup. This mostly adds masks to r/w ops plus few single missing bits. This has been tested for possible regressions on: 1) DCE2 HD2400 (RV610) 2) DCE3 HD3470 (RV620) For a reference and details see: https://bugzilla.kernel.org/show_bug.cgi?id=76231 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon/hdmi: DCE3: clean ACR controlRafał Miłecki
What initially seemed to be a typo in fglrx (using register 0x740c instead of 0x74dc) appeared to be a correct behavior. DCE3 has ACR and CRC registers swapped which explains why we needed WREG32(HDMI0_AUDIO_CRC_CONTROL + offset, 0x1000); This has been tested for possible regressions on DCE3 HD3470 (RV620). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon/hdmi: use separated file for DCE 3.1/3.2 codeRafał Miłecki
DCE 3.1 and 3.2 should be programmed in a different way than DCE 2 and DCE 3. The order of setting registers and sets of registers are different. It's still unsure how we will handle DCE 3.1 vs. DCE 3.2, since they have few differences as well. For now separate DCE 2 and DCE 3 path, so we can work on it without a risk of breaking DCE 3.1+. This has been tested for possible regressions on DCE32 HD4550 (RV710). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: add proper support for RADEON_VM_BLOCK_SIZE v2Christian König
This patch makes it possible to decide how many address bits are spend on the page directory vs the page tables. v2: remove unintended change Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: add large PTE support for NI, SI and CIK v5Christian König
This patch implements support for VRAM page table entry compression. PTE construction is enhanced to identify physically contiguous page ranges and mark them in the PTE fragment field. L1/L2 TLB support is enabled for 64KB (SI/CIK) and 256KB (NI) PTE fragments, significantly improving TLB utilization for VRAM allocations. Linear store bandwidth is improved from 60GB/s to 125GB/s on Pitcairn. Unigine Heaven 3.0 sees an average improvement from 24.7 to 27.7 FPS on default settings at 1920x1200 resolution with vsync disabled. See main comment in radeon_vm.c for a technical description. v2 (chk): rebased and simplified. v3 (chk): add missing hw setup v4 (chk): rebased on current drm-fixes-3.15 v5 (chk): fix comments and commit text Signed-off-by: Jay Cornwall <jay@jcornwall.me> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon: add a i2c bus mutexAlex Deucher
The i2c and aux buses use the same pads so add a mutex to protect access to the pads. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-30drm: add DP MST encoder typeDave Airlie
This adds an encoder type for DP MST encoders. Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-30drm: store encoder name in encoder structJani Nikula
This makes drm_get_encoder_name() thread safe. Reference: http://lkml.kernel.org/r/645ee6e22cad47d38a2b35c21c8d5fe3@DC1-MBX-01\ .ptsecurity.ru Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-30drm: store connector name in connector struct (v2)Jani Nikula
This makes drm_get_connector_name() thread safe. [airlied: fix to build.] Reference: http://lkml.kernel.org/r/645ee6e22cad47d38a2b35c21c8d5fe3@DC1-MBX-01.ptsecurity.ru Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27drm/dp: Add missing kernel-docThierry Reding
Commit 9dc4056026e0 (drm/dp: let drivers specify the name of the I2C- over-AUX adapter) introduced a new field but didn't add the proper kernel-doc for it. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27drm/armada: use shmem helpers if possibleDavid Herrmann
shmem_read_mapping_page() uses mapping_gfp_mask(mapping) as default gfp mask. No reason to use shmem_read_mapping_page_gfp() directly if we want the default behavior. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27drm/gem: replace misleading commentDavid Herrmann
shmem supports page-relocations during swapin since quite some time. It was implemented in: commit bde05d1ccd512696b09db9dd2e5f33ad19152605 Author: Hugh Dickins <hughd@google.com> Date: Tue May 29 15:06:38 2012 -0700 shmem: replace page if mapping excludes its zone The gem-comment about wrongly placed DMA32 pages is no longer valid. Replace it with a proper comment but keep the BUG_ON() to verify correct shmem behavior. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27drm/edid: Use kmemdup instead of kmalloc + memcpyBenoit Taine
This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/memdup.cocci Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27drm/shmobile: Add run-time dependenciesJean Delvare
The shmobile DRM driver is only useful on SuperH and shmobile unless build testing. I am dropping the SuperH dependencies though because the driver doesn't even build there, so in practice it is an arm-only driver for now. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27drm/rcar-du: Add run-time dependenciesJean Delvare
The Renesas R-Car Display Unit driver is only useful on shmobile unless build testing. The LVDS output is useful on an even more reduced hardware set. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27MAINTAINERS: Shovel drivers/gpu/vga/* to DaveDaniel Vetter
DRM is pretty much the main user of this stuff (if we ignore the sysfs interface used by X, i.e. by the same gang of people writing the drm drivers). So shovel it into Dave's responsibility to avoid patches getting lost on lkml. With this get_maintainers will rout vgaarb and switcheroo patches correctly. Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: linux-kernel@vger.kernel.org References: https://lkml.org/lkml/2014/5/25/94 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27Documentation: drm: describing drm properties exposed by various driversSagar Kamble
Started documenting drm properties for drm drivers. This patch provides information about properties in drm, i915, psb and cdv/gma-500. Information about other properties can be added on top of these. v2: Added description of drm properties in armada, exynos, i2c/ch7006, noveau, omap, qxl, radeon, rcar-du v3: Removed "Property Object" column since it is implementation related. Property type column refined.[Ville's review comments] v4: Removed whitespace warnings and minor nits. [Randy's review comments] v5: Restructured output for ENUM properties v6: Review comments on formatting the table. [Laurent's review comments] v7: Minor restructuring. [Laurent's review comments] Cc: Rob Landley <rob@landley.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Sagar Kamble <sagar.a.kamble@intel.com> Cc: "Purushothaman, Vijay A" <vijay.a.purushothaman@intel.com> Cc: linux-doc@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-26drm/ttm: fix kerneldoc of ttm_bo_createAlexandre Courbot
The kerneldoc header of ttm_bo_create() was referring to another (nonexisting) function and had a few obsolete or incorrect arguments. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-26drm: Add 800x600 (SVGA) screen resolution to the built-in EDIDsDaniel Thompson
The 800x600 (SVGA) screen resolution was lacking in the set of built-in selectable EDID screen resolutions that can be used to repair misbehaving monitor firmware. This patch adds the related data set and expands the documentation. Note that the SVGA bit occupies a different byte to all the existing users of the established timing bits forcing a rework of the ESTABLISHED_TIMINGS_BITS macro. Tested new EDID on an aged (and misbehaving) industrial LCD panel; existing EDIDs still pass edid-decode's checksum checks. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Carsten Emde <C.Emde@osadl.org> Cc: linux-doc@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-26Documentation: fix typos in drm docbookMasanari Iida
Fix spelling typo in DocBook/drm.tmpl Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-26drm: fix typoRob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-23drm/dp_helper: add defines for DP 1.2 and MST support. (v2)Dave Airlie
This just adds the defines from the DP 1.2 spec, which we will use later. fix some DP MST to 1.2 MST Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Todd Previte <tprevite@gmail.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com>
2014-05-19Merge branch 'ast-updates' of ssh://people.freedesktop.org/~/linux into drm-nextDave Airlie
Pull in latest updates to AST driver. * 'ast-updates' of ssh://people.freedesktop.org/~/linux: drm/ast: initial DP501 support (v0.2) drm/ast: rename the mindwm/moutdwm and deinline them drm/ast: resync the dram post code with upstream drm/ast: add AST 2400 support. drm/ast: add widescreen + rb modes from X.org driver (v2)
2014-05-19drm/ast: initial DP501 support (v0.2)Dave Airlie
This is the initial attempt at porting the DP501 code from the userspace driver, the firmware file is in http://people.freedesktop.org/~airlied/ast_dp501_fw.bin this should really be exposed as another encoder/connector that is cloneable v0.2: init 3rd tx properly, add scratch reduction of VRAM size backup firmware properly. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-19drm/ast: rename the mindwm/moutdwm and deinline themDave Airlie
we'll need these elsewhere for dp501. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-19drm/ast: resync the dram post code with upstreamDave Airlie
This resyncs the dram post code with the upstream X.org driver where ast have improved the code for setting up the dram chips. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-19drm/ast: add AST 2400 support.Dave Airlie
This is ported from the userspace driver. Untested on any ast2400 hw so far. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-19drm/ast: add widescreen + rb modes from X.org driver (v2)Dave Airlie
This syncs up the mode code from the X.org driver upstream, and adds the mode validation step for hw that doesn't have widescreen. v2: (from Egbert Eich <eich@suse.de) squash drm/ast: Use correct structure member for mode validation to avoid bisect regression. In struct drm_display_mode crtc_hdisplay and crtc_vdisplay are holding the crtc parameters after mode fixup. For validation we need hdisplay and vdisplay. Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-18 20:22:05 +0000