aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-18can: m_can: add deep Suspend/Resume supportQuentin Schulz
This adds Power Management deep Suspend/Resume support for Bosch M_CAN chip. When entering deep sleep, the clocks are gated, the interrupts are disabled. When resuming from deep sleep, the chip needs to be reinitialized, the clocks ungated and the interrupts enabled. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-05-18can: m_can: factorize clock gating and ungatingQuentin Schulz
This creates a function to ungate M_CAN clocks and another to gate the same clocks, then swaps all gating/ungating code with their respective function. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-05-18can: m_can: make m_can_start and m_can_stop symmetricQuentin Schulz
This moves clocks gating outside of the m_can_stop function as the m_can_start function does not (and cannot, at least in current implementation) ungate clocks. This way, both functions can now be used symmetrically. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-05-18can: m_can: move Message RAM initialization to functionQuentin Schulz
To avoid possible ECC/parity checksum errors when reading an uninitialized buffer, the entire Message RAM is initialized when probing the driver. This initialization is done in the same function reading the Device Tree properties. This patch moves the RAM initialization to a separate function so it can be called separately from device initialization from Device Tree. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-05-17Merge branch 'phy-marvell-cleanups'David S. Miller
Andrew Lunn says: ==================== net: phy: marvell: Checkpatch cleanup I will be contributing a few new features to the Marvell PHY driver soon. Start by making the code mostly checkpatch clean. There should not be any functional changes. Just comments set into the correct format, missing blank lines, turn some comparisons around, and refactoring to reduce indentation depth. There is still one camel in the code, but it actually makes sense, so leave it in piece. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: phy: marvell: checkpatch - Fix remaining long linesAndrew Lunn
Fold lines longer than 80 characters Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: phy: marvell: Add helpers to get/set pageAndrew Lunn
Makes the code a bit more readable, and solves quite a few checkpatch warnings of lines longer than 80 characters. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: phy: marvell: Refactor some bigger functionsAndrew Lunn
Break big functions up by using a number of smaller helper function. Solves some of the over 80 lines warnings, by reducing the indentation level. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: phy: marvell: Checkpatch - assignments and comparisonsAndrew Lunn
Avoid multiple assignments Comparisons should place the constant on the right side of the test Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: phy: marvell: Checkpatch - Missing or extra blank linesAndrew Lunn
Remove the extra blank lines, add one in where recommended. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: phy: Marvell: checkpatch - CommentsAndrew Lunn
Use net style comment blocks, and wrap one block with long lines. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17Merge branch 'tcp-TCP-TS-option-use-1-ms-clock'David S. Miller
Eric Dumazet says: ==================== tcp: TCP TS option use 1 ms clock TCP Timestamps option is defined in RFC 7323 Traditionally on linux, it has been tied to the internal 'jiffy' variable, because it had been a cheap and good enough generator. Unfortunately some distros use HZ=250 or even HZ=100 leading to not very useful TCP timestamps. For TCP flows in the DC, Google has used usec resolution for more than two years with great success [1]. RCVBUF autotuning is more precise. This series converts tp->tcp_mstamp to a plain u64 value storing a 1 usec TCP clock. This choice will allow us to upstream the 1 usec TS option as discussed in IETF 97. Kathleen Nichols [2] and others advocate for 1ms TS clocks for network analysis. (1ms being the lowest value supported by RFC 7323.) [1] https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdf [2] http://netseminar.stanford.edu/seminars/02_02_17.pdf ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: switch TCP TS option (RFC 7323) to 1ms clockEric Dumazet
TCP Timestamps option is defined in RFC 7323 Traditionally on linux, it has been tied to the internal 'jiffies' variable, because it had been a cheap and good enough generator. For TCP flows on the Internet, 1 ms resolution would be much better than 4ms or 10ms (HZ=250 or HZ=100 respectively) For TCP flows in the DC, Google has used usec resolution for more than two years with great success [1] Receive size autotuning (DRS) is indeed more precise and converges faster to optimal window size. This patch converts tp->tcp_mstamp to a plain u64 value storing a 1 usec TCP clock. This choice will allow us to upstream the 1 usec TS option as discussed in IETF 97. [1] https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdf Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: replace misc tcp_time_stamp to tcp_jiffies32Eric Dumazet
After this patch, all uses of tcp_time_stamp will require a change when we introduce 1 ms and/or 1 us TCP TS option. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp_lp: cache tcp_time_stampEric Dumazet
tcp_time_stamp will become slightly more expensive soon, cache its value. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp_westwood: use tcp_jiffies32 instead of tcp_time_stampEric Dumazet
This CC does not need 1 ms tcp_time_stamp and can use the jiffy based 'timestamp'. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: use tcp_jiffies32 in __tcp_oow_rate_limited()Eric Dumazet
This place wants to use tcp_jiffies32, this is good enough. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: uses jiffies_32 to feed tp->chrono_startEric Dumazet
tcp_time_stamp will no longer be tied to jiffies. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: use tcp_jiffies32 to feed probe_timestampEric Dumazet
Use tcp_jiffies32 instead of tcp_time_stamp, since tcp_time_stamp will soon be only used for TCP TS option. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: use tcp_jiffies32 for rcv_tstamp and lrcvtimeEric Dumazet
Use tcp_jiffies32 instead of tcp_time_stamp, since tcp_time_stamp will soon be only used for TCP TS option. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: bic, cubic: use tcp_jiffies32 instead of tcp_time_stampEric Dumazet
Use tcp_jiffies32 instead of tcp_time_stamp, since tcp_time_stamp will soon be only used for TCP TS option. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp_bbr: use tcp_jiffies32 instead of tcp_time_stampEric Dumazet
Use tcp_jiffies32 instead of tcp_time_stamp, since tcp_time_stamp will soon be only used for TCP TS option. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: use tcp_jiffies32 to feed tp->snd_cwnd_stampEric Dumazet
Use tcp_jiffies32 instead of tcp_time_stamp to feed tp->snd_cwnd_stamp. tcp_time_stamp will soon be a litle bit more expensive than simply reading 'jiffies'. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: use tcp_jiffies32 to feed tp->lsndtimeEric Dumazet
Use tcp_jiffies32 instead of tcp_time_stamp to feed tp->lsndtime. tcp_time_stamp will soon be a litle bit more expensive than simply reading 'jiffies'. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17dccp: do not use tcp_time_stampEric Dumazet
Use our own macro instead of abusing tcp_time_stamp Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: introduce tcp_jiffies32Eric Dumazet
We abuse tcp_time_stamp for two different cases : 1) base to generate TCP Timestamp options (RFC 7323) 2) A 32bit version of jiffies since some TCP fields are 32bit wide to save memory. Since we want in the future to have 1ms TCP TS clock, regardless of HZ value, we want to cleanup things. tcp_jiffies32 is the truncated jiffies value, which will be used only in places where we want a 'host' timestamp. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17tcp: use tp->tcp_mstamp in output pathEric Dumazet
Idea is to later convert tp->tcp_mstamp to a full u64 counter using usec resolution, so that we can later have fine grained TCP TS clock (RFC 7323), regardless of HZ value. We try to refresh tp->tcp_mstamp only when necessary. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17sch_dsmark: Fix uninitialized variable warning.David S. Miller
We still need to initialize err to -EINVAL for the case where 'opt' is NULL in dsmark_init(). Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17Merge branch 'net-sched-multichain-filters'David S. Miller
Jiri Pirko says: ==================== net: sched: introduce multichain support for filters Currently, each classful qdisc holds one chain of filters. This chain is traversed and each filter could be matched on, which may lead to execution of list of actions. One of such action could be "reclassify", which would "reset" the processing of the filter chain. So this filter chain could be looked at as a flat table. Sometimes it is convenient for user to configure a hierarchy of tables. Example usecase is encapsulation. Hierarchy of tables is a common way how it is done in HW pipelines. So it is much more convenient to offload this. This patchset contains two major patches: 8/10 - This patch introduces the support for having multiple chains of filters. 10/10 - This patch adds new control action to allow going to specified chain The rest of the patches are smaller or bigger depencies of those 2. Please see individual patch descriptions for details. Corresponding iproute2 patches are appended as a reply to this cover letter. Simple example: $ tc qdisc add dev eth0 ingress $ tc filter add dev eth0 parent ffff: protocol ip pref 33 flower dst_mac 52:54:00:3d:c7:6d action goto chain 11 $ tc filter add dev eth0 parent ffff: protocol ip pref 22 chain 11 flower dst_ip 192.168.40.1 action drop $ tc filter show dev eth0 root filter parent ffff: protocol ip pref 33 flower chain 0 filter parent ffff: protocol ip pref 33 flower chain 0 handle 0x1 dst_mac 52:54:00:3d:c7:6d eth_type ipv4 action order 1: gact action goto chain 11 random type none pass val 0 index 2 ref 1 bind 1 filter parent ffff: protocol ip pref 22 flower chain 11 filter parent ffff: protocol ip pref 22 flower chain 11 handle 0x1 eth_type ipv4 dst_ip 192.168.40.1 action order 1: gact action drop random type none pass val 0 index 3 ref 1 bind 1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: add termination action to allow goto chainJiri Pirko
Introduce new type of termination action called "goto_chain". This allows user to specify a chain to be processed. This action type is then processed as a return value in tcf_classify loop in similar way as "reclassify" is, only it does not reset to the first filter in chain but rather reset to the first filter of the desired chain. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: push tp down to action initJiri Pirko
Tp pointer will be needed by the next patch in order to get the chain. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: introduce multichain support for filtersJiri Pirko
Instead of having only one filter per block, introduce a list of chains for every block. Create chain 0 by default. UAPI is extended so the user can specify which chain he wants to change. If the new attribute is not specified, chain 0 is used. That allows to maintain backward compatibility. If chain does not exist and user wants to manipulate with it, new chain is created with specified index. Also, when last filter is removed from the chain, the chain is destroyed. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: push chain dump to a separate functionJiri Pirko
Since there will be multiple chains to dump, push chain dumping code to a separate function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: introduce helpers to work with filter chainsJiri Pirko
Introduce struct tcf_chain object and set of helpers around it. Wraps up insertion, deletion and search in the filter chain. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: move TC_H_MAJ macro call into tcf_auto_prioJiri Pirko
Call the helper from the function rather than to always adjust the return value of the function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: replace nprio by a bool to make the function more readableJiri Pirko
The use of "nprio" variable in tc_ctl_tfilter is a bit cryptic and makes a reader wonder what is going on for a while. So help him to understand this priority allocation dance a litte bit better. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: rename tcf_destroy_chain helperJiri Pirko
Make the name consistent with the rest of the helpers around. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: introduce tcf block infractructureJiri Pirko
Currently, the filter chains are direcly put into the private structures of qdiscs. In order to be able to have multiple chains per qdisc and to allow filter chains sharing among qdiscs, there is a need for common object that would hold the chains. This introduces such object and calls it "tcf_block". Helpers to get and put the blocks are provided to be called from individual qdisc code. Also, the original filter_list pointers are left in qdisc privs to allow the entry into tcf_block processing without any added overhead of possible multiple pointer dereference on fast path. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: move tc_classify function to cls_api.cJiri Pirko
Move tc_classify function to cls_api.c where it belongs, rename it to fit the namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17Merge branch 'dsa-sort'David S. Miller
Andrew Lunn says: ==================== net: dsa: Sort various lists As we gain more DSA drivers and tagging protocols, the lists are getting a bit unruly. Do some sorting. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17drivers: net: DSA: Sort driversAndrew Lunn
With more drivers being added, it is time to sort the drivers to impose some order. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: Sort DSA tagging protocol driversAndrew Lunn
With more tag protocols being added, regain some order by sorting the entries in various places. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17liquidio: fix PF falsely indicating success at setting MAC address of a ↵Felix Manlunas
nonexistent VF In the function assigned to .ndo_set_vf_mac, check the validity of the vfidx argument before proceeding to tell the firmware to set the VF MAC address. Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17liquidio: fix insmod failure when multiple NICs are plugged inRick Farrington
When multiple liquidio NICs are plugged in, the first insmod of the PF driver succeeds. But after an rmmod, a subsequent insmod fails. Reason is during rmmod, the PF driver resets the Octeon of only one of the NICs; it neglects to reset the Octeons of the other NICs. Fix the insmod failure by adding the missing Octeon resets at rmmod. Keep a per-NIC refcount that indicates the number of active PFs in a given NIC. When the refcount goes to zero, then reset the Octeon of that NIC. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: store CPU port pointer in the treeVivien Didelot
A dsa_switch_tree instance holds a dsa_switch pointer and a port index to identify the switch port to which the CPU is attached. Now that the DSA layer has a dsa_port structure to hold this data, use it to point the switch CPU port. This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and s/dst->cpu_port/dst->cpu_dp->index/. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17Merge branch 'mlxsw-Preparations-for-restructuring'David S. Miller
Jiri Pirko says: ==================== mlxsw: Preparations for restructuring This patchset doesn't introduce any functional changes and merely meant to make the code base more receptive for upcoming restructuring. The first six patches mainly shuffle code in order to reduce the scope of structs that shouldn't be defined in the main driver header. Most of them will be later expanded, so it makes sense to correctly place them now. The last patches mostly simplify bridge-related functions, so that they could be more easily modified later on. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum: Default ports to non-virtual modeIdo Schimmel
In virtual mode, packets are classified to FIDs based on their ingress port and VLAN whereas in non-virtual mode only the VLAN is taken into account. Currently ports are initialized to use virtual mode due to the presence of the PVID vPort. However, we're going to transition ports between both modes based on the FIDs they use and not merely based on the presence on a VLAN upper. Therefore, during initialization, no mode will be explicitly set. Since the Programmer's Reference Manual (PRM) doesn't specify a default, explicitly set the port to non-virtual mode and later transition the port between both modes based on the FIDs it uses. In a follow-up patchset, this step will be moved to the common FID core where it logically belongs. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum: Move PVID code to appropriate placeIdo Schimmel
PVID is a port attribute and should therefore reside in the main driver file and not the switchdev specific one. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum_switchdev: Don't batch learning operationsIdo Schimmel
We no longer batch VLAN operations, so there's no need to set the learning state for a range of VLANs. Use a common function to set the learning state for a Port-VLAN, thereby making the code saner more receptive for upcoming changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17mlxsw: spectrum_switchdev: Don't batch STP operationsIdo Schimmel
Simplify the code by using the common function that sets an STP state for a Port-VLAN and remove the existing one that tries to batch it for several VLANs. This will help us in a follow-up patchset to introduce a unified infrastructure for bridge ports, regardless if the bridge is VLAN-aware or not. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 14:28:49 +0000