aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-11-28af_unix: fix use-after-free in unix_stream_read_actor()Eric Dumazet
[ Upstream commit 4b7b492615cf3017190f55444f7016812b66611d ] syzbot reported the following crash [1] After releasing unix socket lock, u->oob_skb can be changed by another thread. We must temporarily increase skb refcount to make sure this other thread will not free the skb under us. [1] BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 Read of size 4 at addr ffff88801f3b9cc4 by task syz-executor107/5297 CPU: 1 PID: 5297 Comm: syz-executor107 Not tainted 6.6.0-syzkaller-15910-gb8e3a87a627b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc4/0x620 mm/kasan/report.c:475 kasan_report+0xda/0x110 mm/kasan/report.c:588 unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 unix_stream_recv_urg net/unix/af_unix.c:2587 [inline] unix_stream_read_generic+0x19a5/0x2480 net/unix/af_unix.c:2666 unix_stream_recvmsg+0x189/0x1b0 net/unix/af_unix.c:2903 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0xe2/0x170 net/socket.c:1066 ____sys_recvmsg+0x21f/0x5c0 net/socket.c:2803 ___sys_recvmsg+0x115/0x1a0 net/socket.c:2845 __sys_recvmsg+0x114/0x1e0 net/socket.c:2875 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fc67492c559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6748ab228 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 000000000000001c RCX: 00007fc67492c559 RDX: 0000000040010083 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 00007fc6749b6348 R08: 00007fc6748ab6c0 R09: 00007fc6748ab6c0 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc6749b6340 R13: 00007fc6749b634c R14: 00007ffe9fac52a0 R15: 00007ffe9fac5388 </TASK> Allocated by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x180/0x3c0 mm/slub.c:3523 __alloc_skb+0x287/0x330 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331 sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] queue_oob net/unix/af_unix.c:2147 [inline] unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1800 [inline] slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826 slab_free mm/slub.c:3809 [inline] kmem_cache_free+0xf8/0x340 mm/slub.c:3831 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:1015 __kfree_skb net/core/skbuff.c:1073 [inline] consume_skb net/core/skbuff.c:1288 [inline] consume_skb+0xdf/0x170 net/core/skbuff.c:1282 queue_oob net/unix/af_unix.c:2178 [inline] unix_stream_sendmsg+0xd49/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b The buggy address belongs to the object at ffff88801f3b9c80 which belongs to the cache skbuff_head_cache of size 240 The buggy address is located 68 bytes inside of freed 240-byte region [ffff88801f3b9c80, ffff88801f3b9d70) The buggy address belongs to the physical page: page:ffffea00007cee40 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1f3b9 flags: 0xfff00000000800(slab|node=0|zone=1|lastcpupid=0x7ff) page_type: 0xffffffff() raw: 00fff00000000800 ffff888142a60640 dead000000000122 0000000000000000 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 5299, tgid 5283 (syz-executor107), ts 103803840339, free_ts 103600093431 set_page_owner include/linux/page_owner.h:31 [inline] post_alloc_hook+0x2cf/0x340 mm/page_alloc.c:1537 prep_new_page mm/page_alloc.c:1544 [inline] get_page_from_freelist+0xa25/0x36c0 mm/page_alloc.c:3312 __alloc_pages+0x1d0/0x4a0 mm/page_alloc.c:4568 alloc_pages_mpol+0x258/0x5f0 mm/mempolicy.c:2133 alloc_slab_page mm/slub.c:1870 [inline] allocate_slab+0x251/0x380 mm/slub.c:2017 new_slab mm/slub.c:2070 [inline] ___slab_alloc+0x8c7/0x1580 mm/slub.c:3223 __slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3322 __slab_alloc_node mm/slub.c:3375 [inline] slab_alloc_node mm/slub.c:3468 [inline] kmem_cache_alloc_node+0x132/0x3c0 mm/slub.c:3523 __alloc_skb+0x287/0x330 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331 sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] queue_oob net/unix/af_unix.c:2147 [inline] unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1137 [inline] free_unref_page_prepare+0x4f8/0xa90 mm/page_alloc.c:2347 free_unref_page+0x33/0x3b0 mm/page_alloc.c:2487 __unfreeze_partials+0x21d/0x240 mm/slub.c:2655 qlink_free mm/kasan/quarantine.c:168 [inline] qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187 kasan_quarantine_reduce+0x18e/0x1d0 mm/kasan/quarantine.c:294 __kasan_slab_alloc+0x65/0x90 mm/kasan/common.c:305 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3478 [inline] slab_alloc mm/slub.c:3486 [inline] __kmem_cache_alloc_lru mm/slub.c:3493 [inline] kmem_cache_alloc+0x15d/0x380 mm/slub.c:3502 vm_area_dup+0x21/0x2f0 kernel/fork.c:500 __split_vma+0x17d/0x1070 mm/mmap.c:2365 split_vma mm/mmap.c:2437 [inline] vma_modify+0x25d/0x450 mm/mmap.c:2472 vma_modify_flags include/linux/mm.h:3271 [inline] mprotect_fixup+0x228/0xc80 mm/mprotect.c:635 do_mprotect_pkey+0x852/0xd60 mm/mprotect.c:809 __do_sys_mprotect mm/mprotect.c:830 [inline] __se_sys_mprotect mm/mprotect.c:827 [inline] __x64_sys_mprotect+0x78/0xb0 mm/mprotect.c:827 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Memory state around the buggy address: ffff88801f3b9b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801f3b9c00: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc >ffff88801f3b9c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801f3b9d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc ffff88801f3b9d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb Fixes: 876c14ad014d ("af_unix: fix holding spinlock in oob handling") Reported-and-tested-by: syzbot+7a2d546fa43e49315ed3@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rao Shoaib <rao.shoaib@oracle.com> Reviewed-by: Rao shoaib <rao.shoaib@oracle.com> Link: https://lore.kernel.org/r/20231113134938.168151-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: ethernet: cortina: Fix MTU max settingLinus Walleij
[ Upstream commit dc6c0bfbaa947dd7976e30e8c29b10c868b6fa42 ] The RX max frame size is over 10000 for the Gemini ethernet, but the TX max frame size is actually just 2047 (0x7ff after checking the datasheet). Reflect this in what we offer to Linux, cap the MTU at the TX max frame minus ethernet headers. We delete the code disabling the hardware checksum for large MTUs as netdev->mtu can no longer be larger than netdev->max_mtu meaning the if()-clause in gmac_fix_features() is never true. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-3-6e611528db08@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: ethernet: cortina: Handle large framesLinus Walleij
[ Upstream commit d4d0c5b4d279bfe3585fbd806efefd3e51c82afa ] The Gemini ethernet controller provides hardware checksumming for frames up to 1514 bytes including ethernet headers but not FCS. If we start sending bigger frames (after first bumping up the MTU on both interfaces sending and receiving the frames), truncated packets start to appear on the target such as in this tcpdump resulting from ping -s 1474: 23:34:17.241983 14:d6:4d:a8:3c:4f (oui Unknown) > bc:ae:c5:6b:a8:3d (oui Unknown), ethertype IPv4 (0x0800), length 1514: truncated-ip - 2 bytes missing! (tos 0x0, ttl 64, id 32653, offset 0, flags [DF], proto ICMP (1), length 1502) OpenWrt.lan > Fecusia: ICMP echo request, id 1672, seq 50, length 1482 If we bypass the hardware checksumming and provide a software fallback, everything starts working fine up to the max TX MTU of 2047 bytes, for example ping -s2000 192.168.1.2: 00:44:29.587598 bc:ae:c5:6b:a8:3d (oui Unknown) > 14:d6:4d:a8:3c:4f (oui Unknown), ethertype IPv4 (0x0800), length 2042: (tos 0x0, ttl 64, id 51828, offset 0, flags [none], proto ICMP (1), length 2028) Fecusia > OpenWrt.lan: ICMP echo reply, id 1683, seq 4, length 2008 The bit enabling to bypass hardware checksum (or any of the "TSS" bits) are undocumented in the hardware reference manual. The entire hardware checksum unit appears undocumented. The conclusion that we need to use the "bypass" bit was found by trial-and-error. Since no hardware checksum will happen, we slot in a software checksum fallback. Check for the condition where we need to compute checksum on the skb with either hardware or software using == CHECKSUM_PARTIAL instead of != CHECKSUM_NONE which is an incomplete check according to <linux/skbuff.h>. On the D-Link DIR-685 router this fixes a bug on the conduit interface to the RTL8366RB DSA switch: as the switch needs to add space for its tag it increases the MTU on the conduit interface to 1504 and that means that when the router sends packages of 1500 bytes these get an extra 4 bytes of DSA tag and the transfer fails because of the erroneous hardware checksumming, affecting such basic functionality as the LuCI web interface. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-2-6e611528db08@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: ethernet: cortina: Fix max RX frame defineLinus Walleij
[ Upstream commit 510e35fb931ffc3b100e5d5ae4595cd3beca9f1a ] Enumerator 3 is 1548 bytes according to the datasheet. Not 1542. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-1-6e611528db08@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28bonding: stop the device in bond_setup_by_slave()Eric Dumazet
[ Upstream commit 3cffa2ddc4d3fcf70cde361236f5a614f81a09b2 ] Commit 9eed321cde22 ("net: lapbether: only support ethernet devices") has been able to keep syzbot away from net/lapb, until today. In the following splat [1], the issue is that a lapbether device has been created on a bonding device without members. Then adding a non ARPHRD_ETHER member forced the bonding master to change its type. The fix is to make sure we call dev_close() in bond_setup_by_slave() so that the potential linked lapbether devices (or any other devices having assumptions on the physical device) are removed. A similar bug has been addressed in commit 40baec225765 ("bonding: fix panic on non-ARPHRD_ETHER enslave failure") [1] skbuff: skb_under_panic: text:ffff800089508810 len:44 put:40 head:ffff0000c78e7c00 data:ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0 kernel BUG at net/core/skbuff.c:192 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:188 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 lr : skb_panic net/core/skbuff.c:188 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 sp : ffff800096a06aa0 x29: ffff800096a06ab0 x28: ffff800096a06ba0 x27: dfff800000000000 x26: ffff0000ce9b9b50 x25: 0000000000000016 x24: ffff0000c78e7bea x23: ffff0000c78e7c00 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff800089508810 x18: ffff800096a06100 x17: 0000000000000000 x16: ffff80008a629a3c x15: 0000000000000001 x14: 1fffe00036837a32 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000201 x10: 0000000000000000 x9 : cb50b496c519aa00 x8 : cb50b496c519aa00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff800096a063b8 x4 : ffff80008e280f80 x3 : ffff8000805ad11c x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:188 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 skb_push+0xf0/0x108 net/core/skbuff.c:2446 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384 dev_hard_header include/linux/netdevice.h:3136 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 __lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326 lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332 bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539 dev_ifsioc+0x754/0x9ac dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786 sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217 sock_ioctl+0x4e8/0x834 net/socket.c:1322 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl fs/ioctl.c:857 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 94785b8b (d4210000) Fixes: 872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231109180102.4085183-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28ptp: annotate data-race around q->head and q->tailEric Dumazet
[ Upstream commit 73bde5a3294853947252cd9092a3517c7cb0cd2d ] As I was working on a syzbot report, I found that KCSAN would probably complain that reading q->head or q->tail without barriers could lead to invalid results. Add corresponding READ_ONCE() and WRITE_ONCE() to avoid load-store tearing. Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20231109174859.3995880-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28xen/events: fix delayed eoi list handlingJuergen Gross
[ Upstream commit 47d970204054f859f35a2237baa75c2d84fcf436 ] When delaying eoi handling of events, the related elements are queued into the percpu lateeoi list. In case the list isn't empty, the elements should be sorted by the time when eoi handling is to happen. Unfortunately a new element will never be queued at the start of the list, even if it has a handling time lower than all other list elements. Fix that by handling that case the same way as for an empty list. Fixes: e99502f76271 ("xen/events: defer eoi in case of excessive number of events") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28ppp: limit MRU to 64KWillem de Bruijn
[ Upstream commit c0a2a1b0d631fc460d830f52d06211838874d655 ] ppp_sync_ioctl allows setting device MRU, but does not sanity check this input. Limit to a sane upper bound of 64KB. No implementation I could find generates larger than 64KB frames. RFC 2823 mentions an upper bound of PPP over SDL of 64KB based on the 16-bit length field. Other protocols will be smaller, such as PPPoE (9KB jumbo frame) and PPPoA (18190 maximum CPCS-SDU size, RFC 2364). PPTP and L2TP encapsulate in IP. Syzbot managed to trigger alloc warning in __alloc_pages: if (WARN_ON_ONCE_GFP(order > MAX_ORDER, gfp)) WARNING: CPU: 1 PID: 37 at mm/page_alloc.c:4544 __alloc_pages+0x3ab/0x4a0 mm/page_alloc.c:4544 __alloc_skb+0x12b/0x330 net/core/skbuff.c:651 __netdev_alloc_skb+0x72/0x3f0 net/core/skbuff.c:715 netdev_alloc_skb include/linux/skbuff.h:3225 [inline] dev_alloc_skb include/linux/skbuff.h:3238 [inline] ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline] ppp_sync_receive+0xff/0x680 drivers/net/ppp/ppp_synctty.c:334 tty_ldisc_receive_buf+0x14c/0x180 drivers/tty/tty_buffer.c:390 tty_port_default_receive_buf+0x70/0xb0 drivers/tty/tty_port.c:37 receive_buf drivers/tty/tty_buffer.c:444 [inline] flush_to_ldisc+0x261/0x780 drivers/tty/tty_buffer.c:494 process_one_work+0x884/0x15c0 kernel/workqueue.c:2630 With call ioctl$PPPIOCSMRU1(r1, 0x40047452, &(0x7f0000000100)=0x5e6417a8) Similar code exists in other drivers that implement ppp_channel_ops ioctl PPPIOCSMRU. Those might also be in scope. Notably excluded from this are pppol2tp_ioctl and pppoe_ioctl. This code goes back to the start of git history. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+6177e1f90d92583bcc58@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: mvneta: fix calls to page_pool_get_statsSven Auhagen
[ Upstream commit ca8add922f9c7f6e2e3c71039da8e0dcc64b87ed ] Calling page_pool_get_stats in the mvneta driver without checks leads to kernel crashes. First the page pool is only available if the bm is not used. The page pool is also not allocated when the port is stopped. It can also be not allocated in case of errors. The current implementation leads to the following crash calling ethstats on a port that is down or when calling it at the wrong moment: ble to handle kernel NULL pointer dereference at virtual address 00000070 [00000070] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Hardware name: Marvell Armada 380/385 (Device Tree) PC is at page_pool_get_stats+0x18/0x1cc LR is at mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] pc : [<c0b413cc>] lr : [<bf0a98d8>] psr: a0000013 sp : f1439d48 ip : f1439dc0 fp : 0000001d r10: 00000100 r9 : c4816b80 r8 : f0d75150 r7 : bf0b400c r6 : c238f000 r5 : 00000000 r4 : f1439d68 r3 : c2091040 r2 : ffffffd8 r1 : f1439d68 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 066b004a DAC: 00000051 Register r0 information: NULL pointer Register r1 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r2 information: non-paged memory Register r3 information: slab kmalloc-2k start c2091000 pointer offset 64 size 2048 Register r4 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r5 information: NULL pointer Register r6 information: slab kmalloc-cg-4k start c238f000 pointer offset 0 size 4096 Register r7 information: 15-page vmalloc region starting at 0xbf0a8000 allocated at load_module+0xa30/0x219c Register r8 information: 1-page vmalloc region starting at 0xf0d75000 allocated at ethtool_get_stats+0x138/0x208 Register r9 information: slab task_struct start c4816b80 pointer offset 0 Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Process snmpd (pid: 733, stack limit = 0x38de3a88) Stack: (0xf1439d48 to 0xf143a000) 9d40: 000000c0 00000001 c238f000 bf0b400c f0d75150 c4816b80 9d60: 00000100 bf0a98d8 00000000 00000000 00000000 00000000 00000000 00000000 9d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9dc0: 00000dc0 5335509c 00000035 c238f000 bf0b2214 01067f50 f0d75000 c0b9b9c8 9de0: 0000001d 00000035 c2212094 5335509c c4816b80 c238f000 c5ad6e00 01067f50 9e00: c1b0be80 c4816b80 00014813 c0b9d7f0 00000000 00000000 0000001d 0000001d 9e20: 00000000 00001200 00000000 00000000 c216ed90 c73943b8 00000000 00000000 9e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9e60: 00000000 c0ad9034 00000000 00000000 00000000 00000000 00000000 00000000 9e80: 00000000 00000000 00000000 5335509c c1b0be80 f1439ee4 00008946 c1b0be80 9ea0: 01067f50 f1439ee3 00000000 00000046 b6d77ae0 c0b383f0 00008946 becc83e8 9ec0: c1b0be80 00000051 0000000b c68ca480 c7172d00 c0ad8ff0 f1439ee3 cf600e40 9ee0: 01600e40 32687465 00000000 00000000 00000000 01067f50 00000000 00000000 9f00: 00000000 5335509c 00008946 00008946 00000000 c68ca480 becc83e8 c05e2de0 9f20: f1439fb0 c03002f0 00000006 5ac3c35a c4816b80 00000006 b6d77ae0 c030caf0 9f40: c4817350 00000014 f1439e1c 0000000c 00000000 00000051 01000000 00000014 9f60: 00003fec f1439edc 00000001 c0372abc b6d77ae0 c0372abc cf600e40 5335509c 9f80: c21e6800 01015c9c 0000000b 00008946 00000036 c03002f0 c4816b80 00000036 9fa0: b6d77ae0 c03000c0 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 40000030 0000000b 00000000 00000000 page_pool_get_stats from mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] mvneta_ethtool_get_stats [mvneta] from ethtool_get_stats+0x154/0x208 ethtool_get_stats from dev_ethtool+0xf48/0x2480 dev_ethtool from dev_ioctl+0x538/0x63c dev_ioctl from sock_ioctl+0x49c/0x53c sock_ioctl from sys_ioctl+0x134/0xbd8 sys_ioctl from ret_fast_syscall+0x0/0x1c Exception stack(0xf1439fa8 to 0xf1439ff0) 9fa0: 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 Code: e28dd004 e1a05000 e2514000 0a00006a (e5902070) This commit adds the proper checks before calling page_pool_get_stats. Fixes: b3fc79225f05 ("net: mvneta: add support for page_pool_get_stats") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Reported-by: Paulo Da Silva <Paulo.DaSilva@kyberna.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28tipc: Fix kernel-infoleak due to uninitialized TLV valueShigeru Yoshida
[ Upstream commit fb317eb23b5ee4c37b0656a9a52a3db58d9dd072 ] KMSAN reported the following kernel-infoleak issue: ===================================================== BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186 copy_to_iter include/linux/uio.h:197 [inline] simple_copy_to_iter net/core/datagram.c:532 [inline] __skb_datagram_iter.5+0x148/0xe30 net/core/datagram.c:420 skb_copy_datagram_iter+0x52/0x210 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] netlink_recvmsg+0x43d/0x1630 net/netlink/af_netlink.c:1967 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg net/socket.c:1066 [inline] __sys_recvfrom+0x476/0x860 net/socket.c:2246 __do_sys_recvfrom net/socket.c:2264 [inline] __se_sys_recvfrom net/socket.c:2260 [inline] __x64_sys_recvfrom+0x130/0x200 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x103/0x9e0 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5f7/0xb50 mm/slub.c:3523 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] tipc_tlv_alloc net/tipc/netlink_compat.c:156 [inline] tipc_get_err_tlv+0x90/0x5d0 net/tipc/netlink_compat.c:170 tipc_nl_compat_recv+0x1042/0x15d0 net/tipc/netlink_compat.c:1324 genl_family_rcv_msg_doit net/netlink/genetlink.c:972 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline] genl_rcv_msg+0x1220/0x12c0 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x4a4/0x6a0 net/netlink/af_netlink.c:2545 genl_rcv+0x41/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0xf4b/0x1230 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1242/0x1420 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x997/0xd60 net/socket.c:2588 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2642 __sys_sendmsg net/socket.c:2671 [inline] __do_sys_sendmsg net/socket.c:2680 [inline] __se_sys_sendmsg net/socket.c:2678 [inline] __x64_sys_sendmsg+0x2fa/0x4a0 net/socket.c:2678 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Bytes 34-35 of 36 are uninitialized Memory access of size 36 starts at ffff88802d464a00 Data copied to user address 00007ff55033c0a0 CPU: 0 PID: 30322 Comm: syz-executor.0 Not tainted 6.6.0-14500-g1c41041124bd #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 ===================================================== tipc_add_tlv() puts TLV descriptor and value onto `skb`. This size is calculated with TLV_SPACE() macro. It adds the size of struct tlv_desc and the length of TLV value passed as an argument, and aligns the result to a multiple of TLV_ALIGNTO, i.e., a multiple of 4 bytes. If the size of struct tlv_desc plus the length of TLV value is not aligned, the current implementation leaves the remaining bytes uninitialized. This is the cause of the above kernel-infoleak issue. This patch resolves this issue by clearing data up to an aligned size. Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat") Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: hns3: fix VF wrong speed and duplex issueJijie Shao
[ Upstream commit dff655e82faffc287d4a72a59f66fa120bf904e4 ] If PF is down, firmware will returns 10 Mbit/s rate and half-duplex mode when PF queries the port information from firmware. After imp reset command is executed, PF status changes to down, and PF will query link status and updates port information from firmware in a periodic scheduled task. However, there is a low probability that port information is updated when PF is down, and then PF link status changes to up. In this case, PF synchronizes incorrect rate and duplex mode to VF. This patch fixes it by updating port information before PF synchronizes the rate and duplex to the VF when PF changes to up. Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: hns3: fix VF reset fail issueJijie Shao
[ Upstream commit 65e98bb56fa3ce2edb400930c05238c9b380500e ] Currently the reset process in hns3 and firmware watchdog init process is asynchronous. We think firmware watchdog initialization is completed before VF clear the interrupt source. However, firmware initialization may not complete early. So VF will receive multiple reset interrupts and fail to reset. So we add delay before VF interrupt source and 5 ms delay is enough to avoid second reset interrupt. Fixes: 427900d27d86 ("net: hns3: fix the timing issue of VF clearing interrupt sources") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: hns3: fix variable may not initialized problem in hns3_init_mac_addr()Yonglong Liu
[ Upstream commit dbd2f3b20c6ae425665b6975d766e3653d453e73 ] When a VF is calling hns3_init_mac_addr(), get_mac_addr() may return fail, then the value of mac_addr_temp is not initialized. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: hns3: fix out-of-bounds access may occur when coalesce info is read via ↵Yonglong Liu
debugfs [ Upstream commit 53aba458f23846112c0d44239580ff59bc5c36c3 ] The hns3 driver define an array of string to show the coalesce info, but if the kernel adds a new mode or a new state, out-of-bounds access may occur when coalesce info is read via debugfs, this patch fix the problem. Fixes: c99fead7cb07 ("net: hns3: add debugfs support for interrupt coalesce") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: hns3: fix incorrect capability bit display for copper portJian Shen
[ Upstream commit 75b247b57d8b71bcb679e4cb37d0db104848806c ] Currently, the FEC capability bit is default set for device version V2. It's incorrect for the copper port. Eventhough it doesn't make the nic work abnormal, but the capability information display in debugfs may confuse user. So clear it when driver get the port type inforamtion. Fixes: 433ccce83504 ("net: hns3: use FEC capability queried from firmware") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: hns3: add barrier in vf mailbox reply processYonglong Liu
[ Upstream commit ac92c0a9a0603fb448e60f38e63302e4eebb8035 ] In hclgevf_mbx_handler() and hclgevf_get_mbx_resp() functions, there is a typical store-store and load-load scenario between received_resp and additional_info. This patch adds barrier to fix the problem. Fixes: 4671042f1ef0 ("net: hns3: add match_id to check mailbox response from PF to VF") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: hns3: fix add VLAN fail issueJian Shen
[ Upstream commit 472a2ff63efb30234cbf6b2cdaf8117f21b4f8bc ] The hclge_sync_vlan_filter is called in periodic task, trying to remove VLAN from vlan_del_fail_bmap. It can be concurrence with VLAN adding operation from user. So once user failed to delete a VLAN id, and add it again soon, it may be removed by the periodic task, which may cause the software configuration being inconsistent with hardware. So add mutex handling to avoid this. user hns3 driver periodic task │ add vlan 10 ───── hns3_vlan_rx_add_vid │ │ (suppose success) │ │ │ del vlan 10 ───── hns3_vlan_rx_kill_vid │ │ (suppose fail,add to │ │ vlan_del_fail_bmap) │ │ │ add vlan 10 ───── hns3_vlan_rx_add_vid │ (suppose success) │ foreach vlan_del_fail_bmp del vlan 10 Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28tty: Fix uninit-value access in ppp_sync_receive()Shigeru Yoshida
[ Upstream commit 719639853d88071dfdfd8d9971eca9c283ff314c ] KMSAN reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline] BUG: KMSAN: uninit-value in ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334 ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline] ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: __alloc_pages+0x75d/0xe80 mm/page_alloc.c:4591 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] __page_frag_cache_refill+0x9a/0x2c0 mm/page_alloc.c:4691 page_frag_alloc_align+0x91/0x5d0 mm/page_alloc.c:4722 page_frag_alloc include/linux/gfp.h:322 [inline] __netdev_alloc_skb+0x215/0x6d0 net/core/skbuff.c:728 netdev_alloc_skb include/linux/skbuff.h:3225 [inline] dev_alloc_skb include/linux/skbuff.h:3238 [inline] ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline] ppp_sync_receive+0x237/0xe70 drivers/net/ppp/ppp_synctty.c:334 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 12950 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 ===================================================== ppp_sync_input() checks the first 2 bytes of the data are PPP_ALLSTATIONS and PPP_UI. However, if the data length is 1 and the first byte is PPP_ALLSTATIONS, an access to an uninitialized value occurs when checking PPP_UI. This patch resolves this issue by checking the data length. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28ipvlan: add ipvlan_route_v6_outbound() helperEric Dumazet
[ Upstream commit 18f039428c7df183b09c69ebf10ffd4e521035d2 ] Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff84d4a65e>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff84d4a65e>] neigh_resolve_output+0x64e/0x750 net/core/neighbour.c:1560 [<ffffffff855ce503>] neigh_output include/net/neighbour.h:545 [inline] [<ffffffff855ce503>] ip6_finish_output2+0x1643/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff855b9ce4>] dst_output include/net/dst.h:444 [inline] [<ffffffff855b9ce4>] NF_HOOK include/linux/netfilter.h:309 [inline] [<ffffffff855b9ce4>] ip6_xmit+0x11a4/0x1b20 net/ipv6/ip6_output.c:352 [<ffffffff8597984e>] sctp_v6_xmit+0x9ae/0x1230 net/sctp/ipv6.c:250 [<ffffffff8594623e>] sctp_packet_transmit+0x25de/0x2bc0 net/sctp/output.c:653 [<ffffffff858f5142>] sctp_packet_singleton+0x202/0x310 net/sctp/outqueue.c:783 [<ffffffff858ea411>] sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] [<ffffffff858ea411>] sctp_outq_flush+0x661/0x3d40 net/sctp/outqueue.c:1212 [<ffffffff858f02f9>] sctp_outq_uncork+0x79/0xb0 net/sctp/outqueue.c:764 [<ffffffff8589f060>] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] [<ffffffff8589f060>] sctp_do_sm+0x55c0/0x5c30 net/sctp/sm_sideeffect.c:1170 [<ffffffff85941567>] sctp_primitive_ASSOCIATE+0x97/0xc0 net/sctp/primitive.c:73 [<ffffffff859408b2>] sctp_sendmsg_to_asoc+0xf62/0x17b0 net/sctp/socket.c:1839 [<ffffffff85910b5e>] sctp_sendmsg+0x212e/0x33b0 net/sctp/socket.c:2029 [<ffffffff8544d559>] inet_sendmsg+0x149/0x310 net/ipv4/af_inet.c:849 [<ffffffff84c6c4d2>] sock_sendmsg_nosec net/socket.c:716 [inline] [<ffffffff84c6c4d2>] sock_sendmsg net/socket.c:736 [inline] [<ffffffff84c6c4d2>] ____sys_sendmsg+0x572/0x8c0 net/socket.c:2504 [<ffffffff84c6ca91>] ___sys_sendmsg net/socket.c:2558 [inline] [<ffffffff84c6ca91>] __sys_sendmsg+0x271/0x360 net/socket.c:2587 [<ffffffff84c6cbff>] __do_sys_sendmsg net/socket.c:2596 [inline] [<ffffffff84c6cbff>] __se_sys_sendmsg net/socket.c:2594 [inline] [<ffffffff84c6cbff>] __x64_sys_sendmsg+0x7f/0x90 net/socket.c:2594 [<ffffffff85b32553>] do_syscall_x64 arch/x86/entry/common.c:51 [inline] [<ffffffff85b32553>] do_syscall_64+0x53/0x80 arch/x86/entry/common.c:84 [<ffffffff85c00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: set SOCK_RCU_FREE before inserting socket into hashtableStanislav Fomichev
[ Upstream commit 871019b22d1bcc9fab2d1feba1b9a564acbb6e99 ] We've started to see the following kernel traces: WARNING: CPU: 83 PID: 0 at net/core/filter.c:6641 sk_lookup+0x1bd/0x1d0 Call Trace: <IRQ> __bpf_skc_lookup+0x10d/0x120 bpf_sk_lookup+0x48/0xd0 bpf_sk_lookup_tcp+0x19/0x20 bpf_prog_<redacted>+0x37c/0x16a3 cls_bpf_classify+0x205/0x2e0 tcf_classify+0x92/0x160 __netif_receive_skb_core+0xe52/0xf10 __netif_receive_skb_list_core+0x96/0x2b0 napi_complete_done+0x7b5/0xb70 <redacted>_poll+0x94/0xb0 net_rx_action+0x163/0x1d70 __do_softirq+0xdc/0x32e asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x36/0x50 do_softirq+0x44/0x70 __inet_hash can race with lockless (rcu) readers on the other cpus: __inet_hash __sk_nulls_add_node_rcu <- (bpf triggers here) sock_set_flag(SOCK_RCU_FREE) Let's move the SOCK_RCU_FREE part up a bit, before we are inserting the socket into hashtables. Note, that the race is really harmless; the bpf callers are handling this situation (where listener socket doesn't have SOCK_RCU_FREE set) correctly, so the only annoyance is a WARN_ONCE. More details from Eric regarding SOCK_RCU_FREE timeline: Commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") added SOCK_RCU_FREE. At that time, the precise location of sock_set_flag(sk, SOCK_RCU_FREE) did not matter, because the thread calling __inet_hash() owns a reference on sk. SOCK_RCU_FREE was only tested at dismantle time. Commit 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF") started checking SOCK_RCU_FREE _after_ the lookup to infer whether the refcount has been taken care of. Fixes: 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28vhost-vdpa: fix use after free in vhost_vdpa_probe()Dan Carpenter
[ Upstream commit e07754e0a1ea2d63fb29574253d1fd7405607343 ] The put_device() calls vhost_vdpa_release_dev() which calls ida_simple_remove() and frees "v". So this call to ida_simple_remove() is a use after free and a double free. Fixes: ebe6a354fa7e ("vhost-vdpa: Call ida_simple_remove() when failed") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Message-Id: <cf53cb61-0699-4e36-a980-94fd4268ff00@moroto.mountain> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28gfs2: Silence "suspicious RCU usage in gfs2_permission" warningAndreas Gruenbacher
[ Upstream commit 074d7306a4fe22fcac0b53f699f92757ab1cee99 ] Commit 0abd1557e21c added rcu_dereference() for dereferencing ip->i_gl in gfs2_permission. This now causes lockdep to complain when gfs2_permission is called in non-RCU context: WARNING: suspicious RCU usage in gfs2_permission Switch to rcu_dereference_check() and check for the MAY_NOT_BLOCK flag to shut up lockdep when we know that dereferencing ip->i_gl is safe. Fixes: 0abd1557e21c ("gfs2: fix an oops in gfs2_permission") Reported-by: syzbot+3e5130844b0c0e2b4948@syzkaller.appspotmail.com Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28SUNRPC: Fix RPC client cleaned up the freed pipefs dentriesfelix
[ Upstream commit bfca5fb4e97c46503ddfc582335917b0cc228264 ] RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir() workqueue,which takes care about pipefs superblock locking. In some special scenarios, when kernel frees the pipefs sb of the current client and immediately alloctes a new pipefs sb, rpc_remove_pipedir function would misjudge the existence of pipefs sb which is not the one it used to hold. As a result, the rpc_remove_pipedir would clean the released freed pipefs dentries. To fix this issue, rpc_remove_pipedir should check whether the current pipefs sb is consistent with the original pipefs sb. This error can be catched by KASAN: ========================================================= [ 250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200 [ 250.498315] Read of size 4 at addr ffff88800a2ab804 by task kworker/0:18/106503 [ 250.500549] Workqueue: events rpc_free_client_work [ 250.501001] Call Trace: [ 250.502880] kasan_report+0xb6/0xf0 [ 250.503209] ? dget_parent+0x195/0x200 [ 250.503561] dget_parent+0x195/0x200 [ 250.503897] ? __pfx_rpc_clntdir_depopulate+0x10/0x10 [ 250.504384] rpc_rmdir_depopulate+0x1b/0x90 [ 250.504781] rpc_remove_client_dir+0xf5/0x150 [ 250.505195] rpc_free_client_work+0xe4/0x230 [ 250.505598] process_one_work+0x8ee/0x13b0 ... [ 22.039056] Allocated by task 244: [ 22.039390] kasan_save_stack+0x22/0x50 [ 22.039758] kasan_set_track+0x25/0x30 [ 22.040109] __kasan_slab_alloc+0x59/0x70 [ 22.040487] kmem_cache_alloc_lru+0xf0/0x240 [ 22.040889] __d_alloc+0x31/0x8e0 [ 22.041207] d_alloc+0x44/0x1f0 [ 22.041514] __rpc_lookup_create_exclusive+0x11c/0x140 [ 22.041987] rpc_mkdir_populate.constprop.0+0x5f/0x110 [ 22.042459] rpc_create_client_dir+0x34/0x150 [ 22.042874] rpc_setup_pipedir_sb+0x102/0x1c0 [ 22.043284] rpc_client_register+0x136/0x4e0 [ 22.043689] rpc_new_client+0x911/0x1020 [ 22.044057] rpc_create_xprt+0xcb/0x370 [ 22.044417] rpc_create+0x36b/0x6c0 ... [ 22.049524] Freed by task 0: [ 22.049803] kasan_save_stack+0x22/0x50 [ 22.050165] kasan_set_track+0x25/0x30 [ 22.050520] kasan_save_free_info+0x2b/0x50 [ 22.050921] __kasan_slab_free+0x10e/0x1a0 [ 22.051306] kmem_cache_free+0xa5/0x390 [ 22.051667] rcu_core+0x62c/0x1930 [ 22.051995] __do_softirq+0x165/0x52a [ 22.052347] [ 22.052503] Last potentially related work creation: [ 22.052952] kasan_save_stack+0x22/0x50 [ 22.053313] __kasan_record_aux_stack+0x8e/0xa0 [ 22.053739] __call_rcu_common.constprop.0+0x6b/0x8b0 [ 22.054209] dentry_free+0xb2/0x140 [ 22.054540] __dentry_kill+0x3be/0x540 [ 22.054900] shrink_dentry_list+0x199/0x510 [ 22.055293] shrink_dcache_parent+0x190/0x240 [ 22.055703] do_one_tree+0x11/0x40 [ 22.056028] shrink_dcache_for_umount+0x61/0x140 [ 22.056461] generic_shutdown_super+0x70/0x590 [ 22.056879] kill_anon_super+0x3a/0x60 [ 22.057234] rpc_kill_sb+0x121/0x200 Fixes: 0157d021d23a ("SUNRPC: handle RPC client pipefs dentries by network namespace aware routines") Signed-off-by: felix <fuzhen5@huawei.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28NFSv4.1: fix SP4_MACH_CRED protection for pnfs IOOlga Kornievskaia
[ Upstream commit 5cc7688bae7f0757c39c1d3dfdd827b724061067 ] If the client is doing pnfs IO and Kerberos is configured and EXCHANGEID successfully negotiated SP4_MACH_CRED and WRITE/COMMIT are on the list of state protected operations, then we need to make sure to choose the DS's rpc_client structure instead of the MDS's one. Fixes: fb91fb0ee7b2 ("NFS: Move call to nfs4_state_protect_write() to nfs4_write_setup()") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28SUNRPC: Add an IS_ERR() check back to where it wasDan Carpenter
[ Upstream commit 4f3ed837186fc0d2722ba8d2457a594322e9c2ef ] This IS_ERR() check was deleted during in a cleanup because, at the time, the rpcb_call_async() function could not return an error pointer. That changed in commit 25cf32ad5dba ("SUNRPC: Handle allocation failure in rpc_new_task()") and now it can return an error pointer. Put the check back. A related revert was done in commit 13bd90141804 ("Revert "SUNRPC: Remove unreachable error condition""). Fixes: 037e910b52b0 ("SUNRPC: Remove unreachable error condition in rpcb_getport_async()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28NFSv4.1: fix handling NFS4ERR_DELAY when testing for session trunkingOlga Kornievskaia
[ Upstream commit 6bd1a77dc72dea0b0d8b6014f231143984d18f6d ] Currently when client sends an EXCHANGE_ID for a possible trunked connection, for any error that happened, the trunk will be thrown out. However, an NFS4ERR_DELAY is a transient error that should be retried instead. Fixes: e818bd085baf ("NFSv4.1 remove xprt from xprt_switch if session trunking test fails") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28mtd: rawnand: meson: check return value of devm_kasprintf()Yi Yang
[ Upstream commit 5a985960a4dd041c21dbe9956958c1633d2da706 ] devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. Fixes: 1e4d3ba66888 ("mtd: rawnand: meson: fix the clock") Signed-off-by: Yi Yang <yiyang13@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231019065548.318443-1-yiyang13@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28mtd: rawnand: intel: check return value of devm_kasprintf()Yi Yang
[ Upstream commit 74ac5b5e2375f1e8ef797ac7770887e9969f2516 ] devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. Fixes: 0b1039f016e8 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC") Signed-off-by: Yi Yang <yiyang13@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231019065537.318391-1-yiyang13@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28SUNRPC: ECONNRESET might require a rebindTrond Myklebust
[ Upstream commit 4b09ca1508a60be30b2e3940264e93d7aeb5c97e ] If connect() is returning ECONNRESET, it usually means that nothing is listening on that port. If so, a rebind might be required in order to obtain the new port on which the RPC service is listening. Fixes: fd01b2597941 ("SUNRPC: ECONNREFUSED should cause a rebind.") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28sched/core: Optimize in_task() and in_interrupt() a bitFinn Thain
[ Upstream commit 87c3a5893e865739ce78aa7192d36011022e0af7 ] Except on x86, preempt_count is always accessed with READ_ONCE(). Repeated invocations in macros like irq_count() produce repeated loads. These redundant instructions appear in various fast paths. In the one shown below, for example, irq_count() is evaluated during kernel entry if !tick_nohz_full_cpu(smp_processor_id()). 0001ed0a <irq_enter_rcu>: 1ed0a: 4e56 0000 linkw %fp,#0 1ed0e: 200f movel %sp,%d0 1ed10: 0280 ffff e000 andil #-8192,%d0 1ed16: 2040 moveal %d0,%a0 1ed18: 2028 0008 movel %a0@(8),%d0 1ed1c: 0680 0001 0000 addil #65536,%d0 1ed22: 2140 0008 movel %d0,%a0@(8) 1ed26: 082a 0001 000f btst #1,%a2@(15) 1ed2c: 670c beqs 1ed3a <irq_enter_rcu+0x30> 1ed2e: 2028 0008 movel %a0@(8),%d0 1ed32: 2028 0008 movel %a0@(8),%d0 1ed36: 2028 0008 movel %a0@(8),%d0 1ed3a: 4e5e unlk %fp 1ed3c: 4e75 rts This patch doesn't prevent the pointless btst and beqs instructions above, but it does eliminate 2 of the 3 pointless move instructions here and elsewhere. On x86, preempt_count is per-cpu data and the problem does not arise presumably because the compiler is free to optimize more effectively. This patch was tested on m68k and x86. I was expecting no changes to object code for x86 and mostly that's what I saw. However, there were a few places where code generation was perturbed for some reason. The performance issue addressed here is minor on uniprocessor m68k. I got a 0.01% improvement from this patch for a simple "find /sys -false" benchmark. For architectures and workloads susceptible to cache line bounce the improvement is expected to be larger. The only SMP architecture I have is x86, and as x86 unaffected I have not done any further measurements. Fixes: 15115830c887 ("preempt: Cleanup the macro maze a bit") Signed-off-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/0a403120a682a525e6db2d81d1a3ffcc137c3742.1694756831.git.fthain@linux-m68k.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28wifi: iwlwifi: Use FW rate for non-data framesMiri Korenblit
[ Upstream commit 499d02790495958506a64f37ceda7e97345a50a8 ] Currently we are setting the rate in the tx cmd for mgmt frames (e.g. during connection establishment). This was problematic when sending mgmt frames in eSR mode, as we don't know what link this frame will be sent on (This is decided by the FW), so we don't know what is the lowest rate. Fix this by not setting the rate in tx cmd and rely on FW to choose the right one. Set rate only for injected frames with fixed rate, or when no sta is given. Also set for important frames (EAPOL etc.) the High Priority flag. Fixes: 055b22e770dd ("iwlwifi: mvm: Set Tx rate and flags when there is not station") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28mtd: rawnand: tegra: add missing check for platform_get_irq()Yi Yang
[ Upstream commit 0a1166c27d4e53186e6bf9147ea6db9cd1d65847 ] Add the missing check for platform_get_irq() and return error code if it fails. Fixes: d7d9f8ec77fe ("mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver") Signed-off-by: Yi Yang <yiyang13@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230821084046.217025-1-yiyang13@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28pwm: Fix double shift bugDan Carpenter
[ Upstream commit d27abbfd4888d79dd24baf50e774631046ac4732 ] These enums are passed to set/test_bit(). The set/test_bit() functions take a bit number instead of a shifted value. Passing a shifted value is a double shift bug like doing BIT(BIT(1)). The double shift bug doesn't cause a problem here because we are only checking 0 and 1 but if the value was 5 or above then it can lead to a buffer overflow. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28drm/amdgpu: fix software pci_unplug on some chipsVitaly Prosyak
[ Upstream commit 4638e0c29a3f2294d5de0d052a4b8c9f33ccb957 ] When software 'pci unplug' using IGT is executed we got a sysfs directory entry is NULL for differant ras blocks like hdp, umc, etc. Before call 'sysfs_remove_file_from_group' and 'sysfs_remove_group' check that 'sd' is not NULL. [ +0.000001] RIP: 0010:sysfs_remove_group+0x83/0x90 [ +0.000002] Code: 31 c0 31 d2 31 f6 31 ff e9 9a a8 b4 00 4c 89 e7 e8 f2 a2 ff ff eb c2 49 8b 55 00 48 8b 33 48 c7 c7 80 65 94 82 e8 cd 82 bb ff <0f> 0b eb cc 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 [ +0.000001] RSP: 0018:ffffc90002067c90 EFLAGS: 00010246 [ +0.000002] RAX: 0000000000000000 RBX: ffffffff824ea180 RCX: 0000000000000000 [ +0.000001] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ +0.000001] RBP: ffffc90002067ca8 R08: 0000000000000000 R09: 0000000000000000 [ +0.000001] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ +0.000001] R13: ffff88810a395f48 R14: ffff888101aab0d0 R15: 0000000000000000 [ +0.000001] FS: 00007f5ddaa43a00(0000) GS:ffff88841e800000(0000) knlGS:0000000000000000 [ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007f8ffa61ba50 CR3: 0000000106432000 CR4: 0000000000350ef0 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000001] ? show_regs+0x72/0x90 [ +0.000002] ? sysfs_remove_group+0x83/0x90 [ +0.000002] ? __warn+0x8d/0x160 [ +0.000001] ? sysfs_remove_group+0x83/0x90 [ +0.000001] ? report_bug+0x1bb/0x1d0 [ +0.000003] ? handle_bug+0x46/0x90 [ +0.000001] ? exc_invalid_op+0x19/0x80 [ +0.000002] ? asm_exc_invalid_op+0x1b/0x20 [ +0.000003] ? sysfs_remove_group+0x83/0x90 [ +0.000001] dpm_sysfs_remove+0x61/0x70 [ +0.000002] device_del+0xa3/0x3d0 [ +0.000002] ? ktime_get_mono_fast_ns+0x46/0xb0 [ +0.000002] device_unregister+0x18/0x70 [ +0.000001] i2c_del_adapter+0x26d/0x330 [ +0.000002] arcturus_i2c_control_fini+0x25/0x50 [amdgpu] [ +0.000236] smu_sw_fini+0x38/0x260 [amdgpu] [ +0.000241] amdgpu_device_fini_sw+0x116/0x670 [amdgpu] [ +0.000186] ? mutex_lock+0x13/0x50 [ +0.000003] amdgpu_driver_release_kms+0x16/0x40 [amdgpu] [ +0.000192] drm_minor_release+0x4f/0x80 [drm] [ +0.000025] drm_release+0xfe/0x150 [drm] [ +0.000027] __fput+0x9f/0x290 [ +0.000002] ____fput+0xe/0x20 [ +0.000002] task_work_run+0x61/0xa0 [ +0.000002] exit_to_user_mode_prepare+0x150/0x170 [ +0.000002] syscall_exit_to_user_mode+0x2a/0x50 Cc: Hawking Zhang <hawking.zhang@amd.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28ALSA: hda/realtek: Add quirk for ASUS UX7602ZMAlex Spataru
[ Upstream commit 26fd31ef9c02a5e91cdb8eea127b056bd7cf0b3b ] Enables the SPI-connected CSC35L41 audio amplifier for this laptop model. As of BIOS version 303 it's still necessary to modify the ACPI table to add the related _DSD properties: https://github.com/alex-spataru/asus_zenbook_ux7602zm_sound/ Signed-off-by: Alex Spataru <alex_spataru@outlook.com> Link: https://lore.kernel.org/r/DS7PR07MB7621BB5BB14F5473D181624CE3A4A@DS7PR07MB7621.namprd07.prod.outlook.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28drm/qxl: prevent memory leakZongmin Zhou
[ Upstream commit 0e8b9f258baed25f1c5672613699247c76b007b5 ] The allocated memory for qdev->dumb_heads should be released in qxl_destroy_monitors_object before qxl suspend. otherwise,qxl_create_monitors_object will be called to reallocate memory for qdev->dumb_heads after qxl resume, it will cause memory leak. Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn> Link: https://lore.kernel.org/r/20230801025309.4049813-1-zhouzongmin@kylinos.cn Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28ASoC: ti: omap-mcbsp: Fix runtime PM underflow warningsTony Lindgren
[ Upstream commit fbb74e56378d8306f214658e3d525a8b3f000c5a ] We need to check for an active device as otherwise we get warnings for some mcbsp instances for "Runtime PM usage count underflow!". Reported-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20231030052340.13415-1-tony@atomide.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28i2c: dev: copy userspace array safelyPhilipp Stanner
[ Upstream commit cc9c54232f04aef3a5d7f64a0ece7df00f1aaa3d ] i2c-dev.c utilizes memdup_user() to copy a userspace array. This is done without an overflow check. Use the new wrapper memdup_array_user() to copy the array more safely. Suggested-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28kgdb: Flush console before entering kgdb on panicDouglas Anderson
[ Upstream commit dd712d3d45807db9fcae28a522deee85c1f2fde6 ] When entering kdb/kgdb on a kernel panic, it was be observed that the console isn't flushed before the `kdb` prompt came up. Specifically, when using the buddy lockup detector on arm64 and running: echo HARDLOCKUP > /sys/kernel/debug/provoke-crash/DIRECT I could see: [ 26.161099] lkdtm: Performing direct entry HARDLOCKUP [ 32.499881] watchdog: Watchdog detected hard LOCKUP on cpu 6 [ 32.552865] Sending NMI from CPU 5 to CPUs 6: [ 32.557359] NMI backtrace for cpu 6 ... [backtrace for cpu 6] ... [ 32.558353] NMI backtrace for cpu 5 ... [backtrace for cpu 5] ... [ 32.867471] Sending NMI from CPU 5 to CPUs 0-4,7: [ 32.872321] NMI backtrace forP cpuANC: Hard LOCKUP Entering kdb (current=..., pid 0) on processor 5 due to Keyboard Entry [5]kdb> As you can see, backtraces for the other CPUs start printing and get interleaved with the kdb PANIC print. Let's replicate the commands to flush the console in the kdb panic entry point to avoid this. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230822131945.1.I5b460ae8f954e4c4f628a373d6e74713c06dd26f@changeid Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28drm/amd/display: Avoid NULL dereference of timing generatorWayne Lin
[ Upstream commit b1904ed480cee3f9f4036ea0e36d139cb5fee2d6 ] [Why & How] Check whether assigned timing generator is NULL or not before accessing its funcs to prevent NULL dereference. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28media: imon: fix access to invalid resource for the second interfaceTakashi Iwai
[ Upstream commit a1766a4fd83befa0b34d932d532e7ebb7fab1fa7 ] imon driver probes two USB interfaces, and at the probe of the second interface, the driver assumes blindly that the first interface got bound with the same imon driver. It's usually true, but it's still possible that the first interface is bound with another driver via a malformed descriptor. Then it may lead to a memory corruption, as spotted by syzkaller; imon driver accesses the data from drvdata as struct imon_context object although it's a completely different one that was assigned by another driver. This patch adds a sanity check -- whether the first interface is really bound with the imon driver or not -- for avoiding the problem above at the probe time. Reported-by: syzbot+59875ffef5cb9c9b29e9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000a838aa0603cc74d6@google.com/ Tested-by: Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20230922005152.163640-1-ricardo@marliere.net Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28media: ccs: Fix driver quirk struct documentationSakari Ailus
[ Upstream commit 441b5c63d71ec9ec5453328f7e83384ecc1dddd9 ] Fix documentation for struct ccs_quirk, a device specific struct for managing deviations from the standard. The flags field was drifted away from where it should have been. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28media: cobalt: Use FIELD_GET() to extract Link WidthIlpo Järvinen
[ Upstream commit f301fedbeecfdce91cb898d6fa5e62f269801fee ] Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields instead of custom masking and shifting. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28gfs2: fix an oops in gfs2_permissionAl Viro
[ Upstream commit 0abd1557e21c617bd13fc18f7725fc6363c05913 ] In RCU mode, we might race with gfs2_evict_inode(), which zeroes ->i_gl. Freeing of the object it points to is RCU-delayed, so if we manage to fetch the pointer before it's been replaced with NULL, we are fine. Check if we'd fetched NULL and treat that as "bail out and tell the caller to get out of RCU mode". Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28gfs2: ignore negated quota changesBob Peterson
[ Upstream commit 4c6a08125f2249531ec01783a5f4317d7342add5 ] When lots of quota changes are made, there may be cases in which an inode's quota information is increased and then decreased, such as when blocks are added to a file, then deleted from it. If the timing is right, function do_qc can add pending quota changes to a transaction, then later, another call to do_qc can negate those changes, resulting in a net gain of 0. The quota_change information is recorded in the qc buffer (and qd element of the inode as well). The buffer is added to the transaction by the first call to do_qc, but a subsequent call changes the value from non-zero back to zero. At that point it's too late to remove the buffer_head from the transaction. Later, when the quota sync code is called, the zero-change qd element is discovered and flagged as an assert warning. If the fs is mounted with errors=panic, the kernel will panic. This is usually seen when files are truncated and the quota changes are negated by punch_hole/truncate which uses gfs2_quota_hold and gfs2_quota_unhold rather than block allocations that use gfs2_quota_lock and gfs2_quota_unlock which automatically do quota sync. This patch solves the problem by adding a check to qd_check_sync such that net-zero quota changes already added to the transaction are no longer deemed necessary to be synced, and skipped. In this case references are taken for the qd and the slot from do_qc so those need to be put. The normal sequence of events for a normal non-zero quota change is as follows: gfs2_quota_change do_qc qd_hold slot_hold Later, when the changes are to be synced: gfs2_quota_sync qd_fish qd_check_sync gets qd ref via lockref_get_not_dead do_sync do_qc(QC_SYNC) qd_put lockref_put_or_lock qd_unlock qd_put lockref_put_or_lock In the net-zero change case, we add a check to qd_check_sync so it puts the qd and slot references acquired in gfs2_quota_change and skip the unneeded sync. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28media: vivid: avoid integer overflowHans Verkuil
[ Upstream commit 4567ebf8e8f9546b373e78e3b7d584cc30b62028 ] Fixes these compiler warnings: drivers/media/test-drivers/vivid/vivid-rds-gen.c: In function 'vivid_rds_gen_fill': drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:56: warning: '.' directive output may be truncated writing 1 byte into a region of size between 0 and 3 [-Wformat-truncation=] 147 | snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d", | ^ drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:52: note: directive argument in the range [0, 9] 147 | snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d", | ^~~~~~~~~ drivers/media/test-drivers/vivid/vivid-rds-gen.c:147:9: note: 'snprintf' output between 9 and 12 bytes into a destination of size 9 147 | snprintf(rds->psname, sizeof(rds->psname), "%6d.%1d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 148 | freq / 16, ((freq & 0xf) * 10) / 16); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28media: gspca: cpia1: shift-out-of-bounds in set_flickerRajeshwar R Shinde
[ Upstream commit 099be1822d1f095433f4b08af9cc9d6308ec1953 ] Syzkaller reported the following issue: UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27 shift exponent 245 is too large for 32-bit type 'int' When the value of the variable "sd->params.exposure.gain" exceeds the number of bits in an integer, a shift-out-of-bounds error is reported. It is triggered because the variable "currentexp" cannot be left-shifted by more than the number of bits in an integer. In order to avoid invalid range during left-shift, the conditional expression is added. Reported-by: syzbot+e27f3dbdab04e43b9f73@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/20230818164522.12806-1-coolrrsh@gmail.com Link: https://syzkaller.appspot.com/bug?extid=e27f3dbdab04e43b9f73 Signed-off-by: Rajeshwar R Shinde <coolrrsh@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.Billy Tsai
[ Upstream commit b53e9758a31c683fc8615df930262192ed5f034b ] The `i3c_master_bus_init` function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails, the DAT `cleanup` will execute before the device is detached, which will execue DAT `free_entry` function. The above scenario can cause the driver to use DAT_data when it is NULL. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20231023080237.560936-1-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28virtio-blk: fix implicit overflow on virtio_max_dma_sizezhenwei pi
[ Upstream commit fafb51a67fb883eb2dde352539df939a251851be ] The following codes have an implicit conversion from size_t to u32: (u32)max_size = (size_t)virtio_max_dma_size(vdev); This may lead overflow, Ex (size_t)4G -> (u32)0. Once virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX instead. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20230904061045.510460-1-pizhenwei@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28i2c: sun6i-p2wi: Prevent potential division by zeroAxel Lin
[ Upstream commit 5ac61d26b8baff5b2e5a9f3dc1ef63297e4b53e7 ] Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The variable set here is later used as a divisor. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 04:40:19 +0000