aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-02-26perf_events: Add new start/stop PMU callbacksStephane Eranian
In certain situations, the kernel may need to stop and start the same event rapidly. The current PMU callbacks do not distinguish between stop and release (i.e., stop + free the resource). Thus, a counter may be released, then it will be immediately re-acquired. Event scheduling will again take place with no guarantee to assign the same counter. On some processors, this may event yield to failure to assign the event back due to competion between cores. This patch is adding a new pair of callback to stop and restart a counter without actually release the underlying counter resource. On stop, the counter is stopped, its values saved and that's it. On start, the value is reloaded and counter is restarted (on x86, actual restart is delayed until perf_enable()). Signed-off-by: Stephane Eranian <eranian@google.com> [ added fallback to ->enable/->disable for all other PMUs fixed x86_pmu_start() to call x86_pmu.enable() merged __x86_pmu_disable into x86_pmu_stop() ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4b703875.0a04d00a.7896.ffffb824@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26perf_events: Report the MMAP pgoff value in bytesPeter Zijlstra
DaveM reported that currently perf interprets the pgoff value reported by the MMAP events as a byte range, but the kernel reports it as a page offset. Since its broken (and unusable) anyway, change the kernel behaviour (ABI) to report bytes indeed, avoiding the need for userspace to deal with PAGE_SIZE things. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25perf annotate: Defer allocating sym_priv->hist arrayArnaldo Carvalho de Melo
Because symbol->end is not fixed up at symbol_filter time, only after all symbols for a DSO are loaded, and that, for asm symbols, may be bogus, causing segfaults when hits happen in these symbols. Reported-by: David Miller <davem@davemloft.net> Reported-by: Anton Blanchard <anton@samba.org> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: <stable@kernel.org> # for .33.x. Does not apply cleanly, needs backport. LKML-Reference: <20100225155740.GB8553@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25perf symbols: Improve debugging information about symtab originsArnaldo Carvalho de Melo
Be more clear about DSO long names and tell from which file kernel symbols were obtained, all in --verbose mode: [root@mica ~]# perf report -v > /dev/null Looking at the vmlinux_path (5 entries long) Using /lib/modules/2.6.33-rc8-tip-00777-g0918527-dirty/build/vmlinux for symbols [root@mica ~]# mv /lib/modules/2.6.33-rc8-tip-00777-g0918527-dirty/build/vmlinux /tmp/dd [root@mica ~]# perf report -v > /dev/null Looking at the vmlinux_path (5 entries long) Using /proc/kallsyms for symbols [root@mica ~]# Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1266866139-6361-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25perf top: Use a macro instead of a constant variableArnaldo Carvalho de Melo
To overcome a silly gcc warning: cc1: warnings being treated as errors builtin-top.c: In function ‘lookup_sym_source’: builtin-top.c:291: warning: not protecting local variables: variable length buffer make: *** [builtin-top.o] Error 1 make: *** Waiting for unfinished jobs.... That is emitted for this: const size_t pattern_len = BITS_PER_LONG / 4 + 2; char pattern[pattern_len + 1]; Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1266866062-6287-1-git-send-email-acme@infradead.org> [ -v2: macroify the naming style ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25perf symbols: Check the right return variableZhang, Yanmin
In function dso__split_kallsyms(), curr_map saves the return value of map__new2. So check it instead of var map after the call returns. Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> # for .33.x Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1267066851.1726.9.camel@localhost> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25perf/scripts: Tag syscall_name helper as not yet availableFrederic Weisbecker
syscall_name() helper, which resolves a syscall arch number to its name, is not yet available as we first need to implement event injection for it to work. Remove it from the documentation or tag its references as unavailable yet. Once it's implemented, we can just revert the current patch. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-02-25perf/scripts: Add perf-trace-python DocumentationTom Zanussi
Also small update to perf-trace-perl and perf-trace docs. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-13-git-send-email-tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-25perf/scripts: Remove unnecessary PyTuple resizesTom Zanussi
If we know the size of a tuple in advance, there's no need to resize it - start out with the known size in the first place. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1266822779.6426.4.camel@tropicana> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-25perf/scripts: Add syscall tracing scriptsTom Zanussi
Adds a set of scripts that aggregate system call totals and system call errors. Most are Python scripts that also test basic functionality of the new Python engine, but there's also one Perl script added for comparison and for reference in some new Documentation contained in a later patch. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-8-git-send-email-tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-25perf/scripts: Add Python scripting engineTom Zanussi
Add base support for Python scripting to perf trace. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-6-git-send-email-tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-23perf/scripts: Remove check-perf-trace from listed scriptsTom Zanussi
The check-perf-trace script only checks Perl functionality, and doesn't really need to be listed as as user script anyway. This only removes the '-report' shell script, so although it doesn't appear in the listing, the '-record' shell script and the check perf trace perl script itself is still available and can still be run manually as such: $ libexec/perf-core/scripts/perl/bin/check-perf-trace-record $ perf trace -s libexec/perf-core/scripts/perl/check-perf-trace.pl Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-6-git-send-email-tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-23perf/scripts: Move Perl scripting files to scripting-engines dirTom Zanussi
Create a scripting-engines directory to contain scripting engine implementation code, in anticipation of the addition of new scripting support. Also removes trace-event-perl.h. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-5-git-send-email-tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-23perf/scripts: Move common code out of Perl-specific filesTom Zanussi
This stuff is needed by all scripting engines; move it from the Perl engine source to a more common place. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-4-git-send-email-tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-23perf/scripts: Fix bug in Util.pmTom Zanussi
Fix bogus calculation. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-3-git-send-email-tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-23perf/scripts: Fix supported language listing optionTom Zanussi
'perf trace -s list' prints a list of the supported scripting languages. One problem with it is that it falls through and prints the trace as well. The use of 'list' for this also makes it easy to confuse with 'perf trace -l', used for listing available scripts. So change 'perf trace -s list' to 'perf trace -s lang' and fixes the fall-through problem. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-2-git-send-email-tzanussi@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-21perf tools: Don't use parent comm if not set at fork timeArnaldo Carvalho de Melo
As the parent comm then is worthless, confusing users about the thread where the sample really happened, leading to think that the sample happened in the parent, not where it really happened, in the children of a thread for which a PERF_RECORD_COMM event was not received. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1266627727-19715-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-21perf symbols: Fix up map end too on modular kernels with no modules installedArnaldo Carvalho de Melo
In 2161db9 we stopped failing when not finding modules when asked too, but then the kernel maps (just one, for vmlinux) wasn't having its ->end field correctly set up, so symbols were not being found for the vmlinux map because its range was 0-0. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1266702793-29434-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-08perf record: Fix existing process callgraph symbolaustin_zhang@linux.intel.com
When 'perf record -g' a existing process, even with debuginfo packages, still cannnot get symbol from 'perf report'. try: perf record -g -p `pidof xxx` -f perf report 68.26% :1181 b74870f2 [.] 0x000000b74870f2 | |--32.09%-- 0xb73b5b44 | 0xb7487102 | 0xb748a4e2 | 0xb748633d | 0xb73b41cd | 0xb73b4467 | 0xb747d531 The reason is: for existing process, in __cmd_record(), the pid is 0 rather than the existing process id. Signed-off-by: Austin Zhang <austin_zhang@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4710.10.255.24.35.1265389362.squirrel@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-07x86/alternatives: Fix build warningMasami Hiramatsu
Fixes these warnings: arch/x86/kernel/alternative.c: In function 'alternatives_text_reserved': arch/x86/kernel/alternative.c:402: warning: comparison of distinct pointer types lacks a cast arch/x86/kernel/alternative.c:402: warning: comparison of distinct pointer types lacks a cast arch/x86/kernel/alternative.c:405: warning: comparison of distinct pointer types lacks a cast arch/x86/kernel/alternative.c:405: warning: comparison of distinct pointer types lacks a cast Caused by: 2cfa197: ftrace/alternatives: Introducing *_text_reserved functions Changes in v2: - Use local variables to compare, instead of type casts. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> LKML-Reference: <20100205171647.15750.37221.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-07perf top: Use address pattern in lookup_sym_sourceArnaldo Carvalho de Melo
Because we may have aliases, like __GI___strcoll_l in /lib64/libc-2.10.2.so that appears in objdump as: $ objdump --start-address=0x0000003715a86420 \ --stop-address=0x0000003715a872dc -dS /lib64/libc-2.10.2.so 0000003715a86420 <__strcoll_l>: 3715a86420: 55 push %rbp 3715a86421: 48 89 e5 mov %rsp,%rbp 3715a86424: 41 57 push %r15 [root@doppio linux-2.6-tip]# So look for the address exactly at the start of the line instead so that annotation can work for in these cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Kirill Smelkov <kirr@landau.phys.spbu.ru> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265550376-12665-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-07perf top: Fix annotate for userspaceKirill Smelkov
First, for programs and prelinked libraries, annotate code was fooled by objdump output IPs (src->eip in the code) being wrongly converted to absolute IPs. In such case there were no conversion needed, but in src->eip = strtoull(src->line, NULL, 16); src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff we were reading absolute address from objdump (e.g. 8048604) and then almost doubling it, because eip & map->start are approximately close for small programs. Needless to say, that later, in record_precise_ip() there was no matching with real runtime IPs. And second, like with `perf annotate` the problem with non-prelinked *.so was that we were doing rip -> objdump address conversion wrong. Also, because unlike `perf annotate`, `perf top` code does annotation based on absolute IPs for performance reasons(*), new helper for mapping objdump addresse to IP is introduced. (*) we get samples info in absolute IPs, and since we do lots of hit-testing on absolute IPs at runtime in record_precise_ip(), it's better to convert objdump addresses to IPs once and do no conversion at runtime. I also had to fix how objdump output is parsed (with hardcoded 8/16 characters format, which was inappropriate for ET_DYN dsos with small addresses like '4ac') Also note, that not all objdump output lines has associtated IPs, e.g. look at source lines here: 000004ac <my_strlen>: extern "C" int my_strlen(const char *s) 4ac: 55 push %ebp 4ad: 89 e5 mov %esp,%ebp 4af: 83 ec 10 sub $0x10,%esp { int len = 0; 4b2: c7 45 fc 00 00 00 00 movl $0x0,-0x4(%ebp) 4b9: eb 08 jmp 4c3 <my_strlen+0x17> while (*s) { ++len; 4bb: 83 45 fc 01 addl $0x1,-0x4(%ebp) ++s; 4bf: 83 45 08 01 addl $0x1,0x8(%ebp) So we mark them with eip=0, and ignore such lines in annotate lookup code. Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru> [ Note: one hunk of this patch was applied by Mike in 57d8188 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1265550376-12665-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-05kprobes: Add mcount to the kprobes blacklistMasami Hiramatsu
Since mcount function can be called from everywhere, it should be blacklisted. Moreover, the "mcount" symbol is a special symbol name. So, it is better to put it in the generic blacklist. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20100205062433.3745.36726.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf tools: Fix session init on non-modular kernelsIngo Molnar
perf top and perf record refuses to initialize on non-modular kernels: refuse to initialize: $ perf top -v map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.33-rc6-tip-00586-g398dde3-dirty/ Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf tools: Clean up O_LARGEFILE et al usageXiao Guangrong
Setting _FILE_OFFSET_BITS and using O_LARGEFILE, lseek64, etc, is redundant. Thanks H. Peter Anvin for pointing it out. So, this patch removes O_LARGEFILE, lseek64, etc. Suggested-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4B6A8972.3070605@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf_events, x86: Fix bug in hw_perf_enable()Stephane Eranian
We cannot assume that because hwc->idx == assign[i], we can avoid reprogramming the counter in hw_perf_enable(). The event may have been scheduled out and another event may have been programmed into this counter. Thus, we need a more robust way of verifying if the counter still contains config/data related to an event. This patch adds a generation number to each counter on each cpu. Using this mechanism we can verify reliabilty whether the content of a counter corresponds to an event. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4b66dc67.0b38560a.1635.ffffae18@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04bitops: Ensure the compile time HWEIGHT is only used for suchPeter Zijlstra
Avoid accidental misuse by failing to compile things Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf_events, x86: Implement intel core solo/duo supportPeter Zijlstra
Implement Intel Core Solo/Duo, aka. Intel Architectural Performance Monitoring Version 1. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf_events: Optimize perf_event_task_tick()Peter Zijlstra
Pretty much all of the calls do perf_disable/perf_enable cycles, pull that out to cut back on hardware programming. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04ftrace: Remove record freezingMasami Hiramatsu
Remove record freezing. Because kprobes never puts probe on ftrace's mcount call anymore, it doesn't need ftrace to check whether kprobes on it. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: przemyslaw@pawelczyk.it Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100202214925.4694.73469.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04kprobes: Check probe address is reservedMasami Hiramatsu
Check whether the address of new probe is already reserved by ftrace or alternatives (on x86) when registering new probe. If reserved, it returns an error and not register the probe. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: przemyslaw@pawelczyk.it Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <20100202214918.4694.94179.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04ftrace/alternatives: Introducing *_text_reserved functionsMasami Hiramatsu
Introducing *_text_reserved functions for checking the text address range is partially reserved or not. This patch provides checking routines for x86 smp alternatives and dynamic ftrace. Since both functions modify fixed pieces of kernel text, they should reserve and protect those from other dynamic text modifier, like kprobes. This will also be extended when introducing other subsystems which modify fixed pieces of kernel text. Dynamic text modifiers should avoid those. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: przemyslaw@pawelczyk.it Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <20100202214911.4694.16587.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04kprobes: Disable booster when CONFIG_PREEMPT=yMasami Hiramatsu
Disable kprobe booster when CONFIG_PREEMPT=y at this time, because it can't ensure that all kernel threads preempted on kprobe's boosted slot run out from the slot even using freeze_processes(). The booster on preemptive kernel will be resumed if synchronize_tasks() or something like that is introduced. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20100202214904.4694.24330.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf annotate: Fix perf top module symbol annotationMike Galbraith
Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: Kirill Smelkov <kirr@landau.phys.spbu.ru> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1265265106.6364.5.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf top: Teach it to autolocate vmlinuxKirill Smelkov
By relying on logic in dso__load_kernel_sym(), we can automatically load vmlinux. The only thing which needs to be adjusted, is how --sym-annotate option is handled - now we can't rely on vmlinux been loaded until full successful pass of dso__load_vmlinux(), but that's not the case if we'll do sym_filter_entry setup in symbol_filter(). So move this step right after event__process_sample() where we know the whole dso__load_kernel_sym() pass is done. By the way, though conceptually similar `perf top` still can't annotate userspace - see next patches with fixes. Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1265223128-11786-9-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf annotate: Fix it for non-prelinked *.soKirill Smelkov
The problem was we were incorrectly calculating objdump addresses for sym->start and sym->end, look: For simple ET_DYN type DSO (*.so) with one function, objdump -dS output is something like this: 000004ac <my_strlen>: int my_strlen(const char *s) 4ac: 55 push %ebp 4ad: 89 e5 mov %esp,%ebp 4af: 83 ec 10 sub $0x10,%esp { i.e. we have relative-to-dso-mapping IPs (=RIP) there. For ET_EXEC type and probably for prelinked libs as well (sorry can't test - I don't use prelink) objdump outputs absolute IPs, e.g. 08048604 <zz_strlen>: extern "C" int zz_strlen(const char *s) 8048604: 55 push %ebp 8048605: 89 e5 mov %esp,%ebp 8048607: 83 ec 10 sub $0x10,%esp { So, if sym->start is always relative to dso mapping(*), we'll have to unmap it for ET_EXEC like cases, and leave as is for ET_DYN cases. (*) and it is - we've explicitely made it relative. Look for adjust_symbols handling in dso__load_sym() Previously we were always unmapping sym->start and for ET_DYN dsos resulting addresses were wrong, and so objdump output was empty. The end result was that perf annotate output for symbols from non-prelinked *.so had always 0.00% percents only, which is wrong. To fix it, let's introduce a helper for converting rip to objdump address, and also let's document what map_ip() and unmap_ip() do -- I had to study sources for several hours to understand it. Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1265223128-11786-8-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf tools: Adjust some verbosity levelsArnaldo Carvalho de Melo
Not to pollute too much 'perf annotate' debugging sessions. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-7-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf record: Stop intercepting events, use postprocessing to get build-idsArnaldo Carvalho de Melo
We want to stream events as fast as possible to perf.data, and also in the future we want to have splice working, when no interception will be possible. Using build_id__mark_dso_hit_ops to create the list of DSOs that back MMAPs we also optimize disk usage in the build-id cache by only caching DSOs that had hits. Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-6-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf build-id: Move the routine to find DSOs with hits to the libArnaldo Carvalho de Melo
Because 'perf record' will have to find the build-ids in after we stop recording, so as to reduce even more the impact in the workload while we do the measurement. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-5-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf probe: Don't use a perf_session instance just to resolve symbolsArnaldo Carvalho de Melo
With the recent modifications done to untie the session and symbol layers, 'perf probe' now can use just the symbols layer. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf symbols: Ditch vdso global variableArnaldo Carvalho de Melo
We can check using strcmp, most DSOs don't start with '[' so the test is cheap enough and we had to test it there anyway since when reading perf.data files we weren't calling the routine that created this global variable and thus weren't setting it as "loaded", which was causing a bogus: Failed to open [vdso], continuing without symbols Message as the first line of 'perf report'. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-3-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf symbols: Fixup vsyscall mapsArnaldo Carvalho de Melo
While debugging a problem reported by Pekka Enberg by printing the IP and all the maps for a thread when we don't find a map for an IP I noticed that dso__load_sym needs to fixup these extra maps it creates to hold symbols in different ELF sections than the main kernel one. Now we're back showing things like: [root@doppio linux-2.6-tip]# perf report | grep vsyscall 0.02% mutt [kernel.kallsyms].vsyscall_fn [.] vread_hpet 0.01% named [kernel.kallsyms].vsyscall_fn [.] vread_hpet 0.01% NetworkManager [kernel.kallsyms].vsyscall_fn [.] vread_hpet 0.01% gconfd-2 [kernel.kallsyms].vsyscall_0 [.] vgettimeofday 0.01% hald-addon-rfki [kernel.kallsyms].vsyscall_fn [.] vread_hpet 0.00% dbus-daemon [kernel.kallsyms].vsyscall_fn [.] vread_hpet [root@doppio linux-2.6-tip]# Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf symbols: Remove perf_session usage in symbols layerArnaldo Carvalho de Melo
I noticed while writing the first test in 'perf regtest' that to just test the symbol handling routines one needs to create a perf session, that is a layer centered on a perf.data file, events, etc, so I untied these layers. This reduces the complexity for the users as the number of parameters to most of the symbols and session APIs now was reduced while not adding more state to all the map instances by only having data that is needed to split the kernel (kallsyms and ELF symtab sections) maps and do vmlinux relocation on the main kernel map. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-03perf tools: Use O_LARGEFILE to open perf data fileXiao Guangrong
Open perf data file with O_LARGEFILE flag since its size is easily larger that 2G. For example: # rm -rf perf.data # ./perf kmem record sleep 300 [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 3142.147 MB perf.data (~137282513 samples) ] # ll -h perf.data -rw------- 1 root root 3.1G ..... Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4B68F32A.9040203@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31perf lock: Clean up various detailsIngo Molnar
Fix up a few small stylistic details: - use consistent vertical spacing/alignment - remove line80 artifacts - group some global variables better - remove dead code Plus rename 'prof' to 'report' to make it more in line with other tools, and remove the line/file keying as we really want to use IPs like the other tools do. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31perf lock: Introduce new tool "perf lock", for analyzing lock statisticsHitoshi Mitake
Adding new subcommand "perf lock" to perf. I have a lot of remaining ToDos, but for now perf lock can already provide minimal functionality for analyzing lock statistics. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31perf lock: Enhance information of lock trace eventsHitoshi Mitake
Add wait time and lock identification details. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1264851813-8413-11-git-send-email-mitake@dcl.info.waseda.ac.jp> [ removed the file/line bits as we can do that better via IPs ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31perf: Add util/include/linuxhash.h to include hash.h of kernelHitoshi Mitake
linux/hash.h, hash header of kernel, is also useful for perf. util/include/linuxhash.h includes linux/hash.h, so we can use hash facilities (e.g. hash_long()) in perf now. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1264851813-8413-3-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31perf tools: Add __data_loc supportHitoshi Mitake
This patch is required to test the next patch for perf lock. At 064739bc4b3d7f424b2f25547e6611bcf0132415 , support for the modifier "__data_loc" of format is added. But, when I wanted to parse format of lock_acquired (or some event else), raw_field_ptr() did not returned correct pointer. So I modified raw_field_ptr() like this patch. Then raw_field_ptr() works well. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> LKML-Reference: <1264851813-8413-2-git-send-email-mitake@dcl.info.waseda.ac.jp> [ v3: fixed minor stylistic detail ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31Revert "perf record: Intercept all events"Hitoshi Mitake
This reverts commit f5a2c3dce03621b55f84496f58adc2d1a87ca16f. This patch is required for making "perf lock rec" work. The commit f5a2c3dce0 changes write_event() of builtin-record.c . And changed write_event() sometimes doesn't stop with perf lock rec. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> [ that commit also causes perf record to not be Ctrl-C-able, and it's concetually wrong to parse the data at record time (unconditionally - even when not needed), as we eventually want to be able to do zero-copy recording, at least for non-archive recordings. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 10:28:34 +0000