| Age | Commit message (Collapse) | Author |
|---|
|
Use the new rcu_read_lock_sched/unlock_sched() in marker code around the call
site instead of preempt_disable/enable(). It helps reviewing the code more
easily.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Create marker_synchronize_unregister() which must be called before the end of
exit() to make sure every probe callers have exited the non preemptible section
and thus are not executing the probe code anymore.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The tracepoints had the same problem markers did have wrt reentrancy. Apply a
similar fix using a rcu_barrier after each tracepoint mutex lock.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Make tracepoints use rcu sched. (cleanup)
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
unregister bug:
codes using makers are typically calling marker_probe_unregister()
and then destroying the data that marker_probe_func needs(or
unloading this module). This is bug when the corresponding
marker_probe_func is still running(on other cpus),
it is using the destroying/ed data.
we should call synchronize_sched() after marker_update_probes().
reenter bug:
marker_probe_register(), marker_probe_unregister() and
marker_probe_unregister_private_data() are not reentrant safe
functions. these 3 functions release markers_mutex and then
require it again and do "entry->oldptr = old; ...", but entry->oldptr
maybe is using now for these 3 functions may reenter when markers_mutex
is released.
we use synchronize_sched() instead of call_rcu_sched() to fix
this bug. actually we can do:
"
if (entry->rcu_pending)
rcu_barrier_sched();
"
after require markers_mutex again. but synchronize_sched()
is better and simpler. For these 3 functions are not critical path.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
With latest -tip I get this bug:
[ 49.439988] in_atomic():0, irqs_disabled():1
[ 49.440118] INFO: lockdep is turned off.
[ 49.440118] Pid: 2814, comm: modprobe Tainted: G W 2.6.27-rc7 #4
[ 49.440118] [<c01215e1>] __might_sleep+0xe1/0x120
[ 49.440118] [<c01148ea>] ftrace_modify_code+0x2a/0xd0
[ 49.440118] [<c01148a2>] ? ftrace_test_p6nop+0x0/0xa
[ 49.440118] [<c016e80e>] __ftrace_update_code+0xfe/0x2f0
[ 49.440118] [<c01148a2>] ? ftrace_test_p6nop+0x0/0xa
[ 49.440118] [<c016f190>] ftrace_convert_nops+0x50/0x80
[ 49.440118] [<c016f1d6>] ftrace_init_module+0x16/0x20
[ 49.440118] [<c015498b>] load_module+0x185b/0x1d30
[ 49.440118] [<c01767a0>] ? find_get_page+0x0/0xf0
[ 49.440118] [<c02463c0>] ? sprintf+0x0/0x30
[ 49.440118] [<c034e012>] ? mutex_lock_interruptible_nested+0x1f2/0x350
[ 49.440118] [<c0154eb3>] sys_init_module+0x53/0x1b0
[ 49.440118] [<c0352340>] ? do_page_fault+0x0/0x740
[ 49.440118] [<c0104012>] syscall_call+0x7/0xb
[ 49.440118] =======================
It is because ftrace_modify_code() calls copy_to_user and
copy_from_user.
These functions have been inserted after guessing that there
couldn't be any race condition but copy_[to/from]_user might
sleep and __ftrace_update_code is called with local_irq_saved.
These function have been inserted since this commit:
d5e92e8978fd2574e415dc2792c5eb592978243d:
"ftrace: x86 use copy from user function"
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Could just as easily change the three casts to cast to the correct
type...this patch changes the type of ftrace_nop instead.
Supresses sparse warnings:
arch/x86/kernel/ftrace.c:157:14: warning: incorrect type in assignment (different signedness)
arch/x86/kernel/ftrace.c:157:14: expected long *static [toplevel] ftrace_nop
arch/x86/kernel/ftrace.c:157:14: got unsigned long *<noident>
arch/x86/kernel/ftrace.c:161:14: warning: incorrect type in assignment (different signedness)
arch/x86/kernel/ftrace.c:161:14: expected long *static [toplevel] ftrace_nop
arch/x86/kernel/ftrace.c:161:14: got unsigned long *<noident>
arch/x86/kernel/ftrace.c:165:14: warning: incorrect type in assignment (different signedness)
arch/x86/kernel/ftrace.c:165:14: expected long *static [toplevel] ftrace_nop
arch/x86/kernel/ftrace.c:165:14: got unsigned long *<noident>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
With the recent updates to ftrace, there should not be any failures when
modifying the code. If there is, then we need to warn about it.
This patch has a cleaned up version of the code that I used to discover
that the weak symbols were causing failures.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Replace "none" tracer by the recently created "nop" tracer.
Both are pretty similar except that nop accepts TRACE_PRINT
or TRACE_SPECIAL entries.
And as a consequence, changing the size of the ring buffer now
requires that tracing has already been disabled.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Now that the nop tracer is used as the default tracer by
replacing the "none" tracer, tracing engine depends on it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
If nop tracer is selected, some old entries from the previous tracer
could still be enqueued. Tracing have to be reset.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The functions are already 'extern' anyway, so there's no problem
with linkage. Removing these ifdefs also helps find any potential
compiler errors.
Suggested by Andrew Morton.
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
When CONFIG_DYNAMIC_FTRACE isn't used, neither is mcount_addr. This
patch eliminates that warning.
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
A no-op tracer which can serve two purposes:
1. A template for development of a new tracer.
2. A convenient way to see ftrace_printk() calls without
an irrelevant trace making the output messy.
[ mingo@elte.hu: resolved conflicts ]
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Allow a user to inject a marker (TRACE_PRINT entry) into the trace ring
buffer. The related file operations are derived from code by Frédéric
Weisbecker <fweisbec@gmail.com>.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Also make trace_seq_print_cont() non-static, and add a newline if the
seq buffer can't hold all data.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Offer mmiotrace users a function to inject markers from inside the kernel.
This depends on the trace_vprintk() patch.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
trace_vprintk() for easier implementation of tracer specific *_printk
functions. Add check check for no_tracer, and implement
__ftrace_printk() as a wrapper.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Moves the mmiotrace specific functions from trace.c to
trace_mmiotrace.c. Functions trace_wake_up(), tracing_get_trace_entry(),
and tracing_generic_entry_update() are therefore made available outside
trace.c.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This must be brown paper bag week for Steven Rostedt!
While working on ftrace for PPC, I discovered that the hash locking done
when CONFIG_FTRACE_MCOUNT_RECORD is not set, is totally incorrect.
With a cut and paste error, I had the hash lock macro to lock for both
hash_lock _and_ hash_unlock!
This bug did not affect x86 since this bug was introduced when
CONFIG_FTRACE_MCOUNT_RECORD was added to x86.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
ftrace_release is necessary for all uses of dynamic ftrace and not just
the archs that have CONFIG_FTRACE_MCOUNT_RECORD defined.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
make most of the tracers depend on DEBUG_KERNEL - that's their intended
purpose. (most distributions have DEBUG_KERNEL enabled anyway so this is
not a practical limitation - but it simplifies the tracing menu in the
normal case)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
While profiling the smp behaviour of the scheduler it was needed to know to
which cpu a task got woken.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Currently ftrace_printk only works with the ftrace tracer, switch it to an
iter_ctrl setting so we can make us of them with other tracers too.
[rostedt@redhat.com: tweak to the disable condition]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
An item in the trace buffer that is bigger than one entry may be split
up using the TRACE_CONT entry. This makes it a virtual single entry.
The current code increments the iterator index even while traversing
TRACE_CONT entries, making it look like the iterator is further than
it actually is.
This patch adds code to not increment the iterator index while skipping
over TRACE_CONT entries.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Peter Zijlstra provided me with a nice brown paper bag while letting me know
that I was doing a logical AND and not a binary one, making a condition
true more often than it should be.
Luckily, a false true is handled by the calling function and no harm is
done. But this needs to be fixed regardless.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Currently some of the ftrace output goes skewiff if you have more
than 9 cpus, and some if you have more than 99.
Twiddle with the headers and format strings to make up to 999 cpus
display without causing spacing problems.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch adds indexes into the stack that the functions in the
stack dump were found at. As an added bonus, I also added a diff
to show which function is the most notorious consumer of the stack.
The output now looks like this:
# cat /debug/tracing/stack_trace
Depth Size Location (48 entries)
----- ---- --------
0) 2476 212 blk_recount_segments+0x39/0x59
1) 2264 12 bio_phys_segments+0x16/0x1d
2) 2252 20 blk_rq_bio_prep+0x23/0xaf
3) 2232 12 init_request_from_bio+0x74/0x77
4) 2220 56 __make_request+0x294/0x331
5) 2164 136 generic_make_request+0x34f/0x37d
6) 2028 56 submit_bio+0xe7/0xef
7) 1972 28 submit_bh+0xd1/0xf0
8) 1944 112 block_read_full_page+0x299/0x2a9
9) 1832 8 blkdev_readpage+0x14/0x16
10) 1824 28 read_cache_page_async+0x7e/0x109
11) 1796 16 read_cache_page+0x11/0x49
12) 1780 32 read_dev_sector+0x3c/0x72
13) 1748 48 read_lba+0x4d/0xaa
14) 1700 168 efi_partition+0x85/0x61b
15) 1532 72 rescan_partitions+0x10e/0x266
16) 1460 40 do_open+0x1c7/0x24e
17) 1420 292 __blkdev_get+0x79/0x84
18) 1128 12 blkdev_get+0x12/0x14
19) 1116 20 register_disk+0xd1/0x11e
20) 1096 28 add_disk+0x34/0x90
21) 1068 52 sd_probe+0x2b1/0x366
22) 1016 20 driver_probe_device+0xa5/0x120
23) 996 8 __device_attach+0xd/0xf
24) 988 32 bus_for_each_drv+0x3e/0x68
25) 956 24 device_attach+0x56/0x6c
26) 932 16 bus_attach_device+0x26/0x4d
27) 916 64 device_add+0x380/0x4b4
28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9
29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a
30) 664 36 __scsi_add_device+0x88/0xae
31) 628 44 ata_scsi_scan_host+0x9e/0x21c
32) 584 28 ata_host_register+0x1cb/0x1db
33) 556 24 ata_host_activate+0x98/0xb5
34) 532 192 ahci_init_one+0x9bd/0x9e9
35) 340 20 pci_device_probe+0x3e/0x5e
36) 320 20 driver_probe_device+0xa5/0x120
37) 300 20 __driver_attach+0x3f/0x5e
38) 280 36 bus_for_each_dev+0x40/0x62
39) 244 12 driver_attach+0x19/0x1b
40) 232 28 bus_add_driver+0x9c/0x1af
41) 204 28 driver_register+0x76/0xd2
42) 176 20 __pci_register_driver+0x44/0x71
43) 156 8 ahci_init+0x14/0x16
44) 148 100 _stext+0x42/0x122
45) 48 20 kernel_init+0x175/0x1dc
46) 28 28 kernel_thread_helper+0x7/0x10
The first column is simply an index starting from the inner most function
and counting down to the outer most.
The next column is the location that the function was found on the stack.
The next column is the size of the stack for that function.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The warning messages about old objcopy and local functions spam the
user quite drastically. Remove the warning until we can find a nicer
way of tell the user to upgrade their objcopy.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The mcount record method of ftrace scans objdump for references to mcount.
Using mcount as the reference to test if the calls to mcount being replaced
are indeed calls to mcount, this use of mcount was also caught as a
location to change. Using a variable that points to the mcount address
moves this reference into the data section that is not scanned, and
we do not use a false location to try and modify.
The warn on code was what was used to detect this bug.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This is another tracer using the ftrace infrastructure, that examines
at each function call the size of the stack. If the stack use is greater
than the previous max it is recorded.
You can always see (and set) the max stack size seen. By setting it
to zero will start the recording again. The backtrace is also available.
For example:
# cat /debug/tracing/stack_max_size
1856
# cat /debug/tracing/stack_trace
[<c027764d>] stack_trace_call+0x8f/0x101
[<c021b966>] ftrace_call+0x5/0x8
[<c02553cc>] clocksource_get_next+0x12/0x48
[<c02542a5>] update_wall_time+0x538/0x6d1
[<c0245913>] do_timer+0x23/0xb0
[<c0257657>] tick_do_update_jiffies64+0xd9/0xf1
[<c02576b9>] tick_sched_timer+0x4a/0xad
[<c0250fe6>] __run_hrtimer+0x3e/0x75
[<c02518ed>] hrtimer_interrupt+0xf1/0x154
[<c022c870>] smp_apic_timer_interrupt+0x71/0x84
[<c021b7e9>] apic_timer_interrupt+0x2d/0x34
[<c0238597>] finish_task_switch+0x29/0xa0
[<c05abd13>] schedule+0x765/0x7be
[<c05abfca>] schedule_timeout+0x1b/0x90
[<c05ab4d4>] wait_for_common+0xab/0x101
[<c05ab5ac>] wait_for_completion+0x12/0x14
[<c033cfc3>] blk_execute_rq+0x84/0x99
[<c0402470>] scsi_execute+0xc2/0x105
[<c040250a>] scsi_execute_req+0x57/0x7f
[<c043afe0>] sr_test_unit_ready+0x3e/0x97
[<c043bbd6>] sr_media_change+0x43/0x205
[<c046b59f>] media_changed+0x48/0x77
[<c046b5ff>] cdrom_media_changed+0x31/0x37
[<c043b091>] sr_block_media_changed+0x16/0x18
[<c02b9e69>] check_disk_change+0x1b/0x63
[<c046f4c3>] cdrom_open+0x7a1/0x806
[<c043b148>] sr_block_open+0x78/0x8d
[<c02ba4c0>] do_open+0x90/0x257
[<c02ba869>] blkdev_open+0x2d/0x56
[<c0296a1f>] __dentry_open+0x14d/0x23c
[<c0296b32>] nameidata_to_filp+0x24/0x38
[<c02a1c68>] do_filp_open+0x347/0x626
[<c02967ef>] do_sys_open+0x47/0xbc
[<c02968b0>] sys_open+0x23/0x2b
[<c021aadd>] sysenter_do_call+0x12/0x26
I've tested this on both x86_64 and i386.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
CHK include/linux/version.h
CHK include/linux/utsrelease.h
CC scripts/mod/empty.o
/bin/sh: /usr/src/25/scripts/recordmcount.pl: Permission denied
We shouldn't assume that files have their `x' bits set. There are various
ways in which file permissions get lost, including use of patch(1).
It might not be correct to assume that perl lives in $PATH?
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The --globalize-symbols option came out in objcopy version 2.17.
If the kernel is being compiled on a system with a lower version of
objcopy, then we can not use the globalize / localize trick to
link to symbols pointing to local functions.
This patch tests the version of objcopy and will only use the trick
if the version is greater than or equal to 2.17. Otherwise, if an
object has only local functions within a section, it will give a
nice warning and recommend the user to upgrade their objcopy.
Leaving the symbols unrecorded is not that big of a deal, since the
mcount record method changes the actual mcount code to be a simple
"ret" without recording registers or anything.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
enclose the argument in parenthesis. (especially since we cast it,
which is a high prio operation)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
After disabling FTRACE_MCOUNT_RECORD via a patch, a dormant build
failure surfaced:
kernel/trace/ftrace.c: In function 'ftrace_record_ip':
kernel/trace/ftrace.c:416: error: incompatible type for argument 1 of '_spin_lock_irqsave'
kernel/trace/ftrace.c:433: error: incompatible type for argument 1 of '_spin_lock_irqsave'
Introduced by commit 6dad8e07f4c10b17b038e84d29f3ca41c2e55cd0 ("ftrace:
add necessary locking for ftrace records").
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The modification of code is performed either by kstop_machine, before
SMP starts, or on module code before the module is executed. There is
no reason to do the modifications from assembly. The copy to and from
user functions are sufficient and produces cleaner and easier to read
code.
Thanks to Benjamin Herrenschmidt for suggesting the idea.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
During tests and checks, I've discovered that there were failures to
convert mcount callers into nops. Looking deeper into these failures,
code that was attempted to be changed was not an mcount caller.
The current code only updates if the code being changed is what it expects,
but I still investigate any time there is a failure.
What was happening is that a weak symbol was being used as a reference
for other mcount callers. That weak symbol was also referenced elsewhere
so the offsets were using the strong symbol and not the function symbol
that it was referenced from.
This patch changes the setting up of the mcount_loc section to search
for a global function that is not weak. It will pick a local over a weak
but if only a weak is found in a section, a warning is printed and the
mcount location is not recorded (just to be safe).
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
I'm trying to keep all the arch changes in recordmcount.pl in one place.
I moved your code into that area, by adding the flags to the commands
that were passed in.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
I'm seeing when I use separate src/build dirs:
make[3]: *** [arch/x86/kernel/time_32.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
make[3]: *** [arch/x86/kernel/irq_32.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
make[3]: *** [arch/x86/kernel/ldt.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
make[3]: *** [arch/x86/kernel/i8259.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
This fixes it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch fixes incorrect comment style of __ftrace_enabled_save().
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The new design of pre-recorded mcounts and updating the code outside of
kstop_machine has changed the way the records themselves are protected.
This patch uses the ftrace_lock to protect the records. Note, the lock
still does not need to be taken within calls that are only called via
kstop_machine, since the that code can not run while the spin lock is held.
Also removed the hash_lock needed for the daemon when MCOUNT_RECORD is
configured. Also did a slight cleanup of an unused variable.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
If one of the self tests of ftrace has disabled the function tracer,
do not run the code to convert the mcount calls in modules.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch fixes some mistakes on the tracer in warning messages when
debugfs fails to create tracing files.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: srostedt@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
hack around:
ld: Relocatable linking with relocations from format elf32-i386 (init/.tmp_gl_calibrate.o) to format elf64-x86-64 (init/.tmp_mx_calibrate.o) i CC arch/x86/mm/extable.o
objcopy: 'init/.tmp_mx_calibrate.o': No such file
rm: cannot remove `init/.tmp_mx_calibrate.o': No such file or directory
ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/extable.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_extable.o) is not supported
mv: cannot stat `arch/x86/mm/.tmp_mx_extable.o': No such file or directory
ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/fault.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_fault.o) is not supported
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
fix:
kernel/built-in.o: In function `ftrace_dump':
(.text+0x2e2ea): undefined reference to `ftrace_kill_atomic'
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
fix:
In file included from init/main.c:65:
include/linux/ftrace.h:166: error: expected ‘,' or ‘;' before ‘{' token
make[1]: *** [init/main.o] Error 1
make: *** [init/main.o] Error 2
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
At OLS I had a lot of interest to be able to have the ftrace buffers
dumped on panic. Usually one would expect to uses kexec and examine
the buffers after a new kernel is loaded. But sometimes the resources
do not permit kdump and kexec, so having an option to still see the
sequence of events up to the crash is very advantageous.
This patch adds the option to have the ftrace buffers dumped to the
console in the latency_trace format on a panic. When the option is set,
the default entries per CPU buffer are lowered to 16384, since the writing
to the serial (if that is the console) may take an awful long time
otherwise.
[
Changes since -v1:
Got alpine to send correctly (as well as spell check working).
Removed config option.
Moved the static variables into ftrace_dump itself.
Gave printk a log level.
]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
