aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-27ARM: uniphier: add outer cache supportMasahiro Yamada
This commit adds support for UniPhier outer cache controller. All the UniPhier SoCs are equipped with the L2 cache, while the L3 cache is currently only integrated on PH1-Pro5 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26Merge tag 'samsung-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Samsung SoC updates for v4.4 - use PWM lookup table with pwm_add_table() for the following boards : s3c24xx h1940 and rx1950 : s3c64xx smdk6410, crag6410, hmt and smartq - document: update bootloader interface on exynos542x * tag 'samsung-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: Documentation: EXYNOS: Update bootloader interface on exynos542x ARM: S3C64XX: Use PWM lookup table for mach-smartq ARM: S3C64XX: Use PWM lookup table for mach-hmt ARM: S3C64XX: Use PWM lookup table for mach-crag6410 ARM: S3C64XX: Use PWM lookup table for smdk6410 ARM: S3C24XX: Use PWM lookup table for mach-rx1950 ARM: S3C24XX: Use PWM lookup table for mach-h1940 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26Merge tag 'mvebu-soc-4.4-2' of git://git.infradead.org/linux-mvebu into next/socOlof Johansson
mvebu soc for 4.4 (part 2) - Use mac_pton() helper in the oropn5x board instead of duplicating it - Add the broken-idle option allowing to boot boards with a mistake in the hardware design * tag 'mvebu-soc-4.4-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add broken-idle option ARM: orion5x: use mac_pton() helper Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26Merge tag 'tegra-for-4.4-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc ARM: tegra: Core SoC changes for v4.4-rc1 A single patch to restore rfkill support on AC100. * tag 'tegra-for-4.4-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: paz00: use con_id's to refer GPIO's in gpiod_lookup table Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26Merge tag 'at91-ab-soc2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc More SoC changes for 4.4: - a great fix for PM/suspend/resume * tag 'at91-ab-soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-24Documentation: EXYNOS: Update bootloader interface on exynos542xKrzysztof Kozlowski
Update the documentation about: 1. Usage of PMU_SPARE2 register. Bootloaders on Exynos542x-based boards often use the register PMU_SPARE2 (0x908) in the same way as on Exynos3250: as a indicator the secondary CPU was booted on. The bootloader will set this value to non-zero, after sucessfull power up of secondary CPU. In the same time this booted CPU will stuck (spin) waiting for software reset. 2. Exynos542x entry address for secondary CPU boot up after system suspend (with MCPM enabled and in non-secure mode). See arch/arm/mach-exynos/mcpm-exynos.c for source code. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-23Merge tag 'imx-soc-4.4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc The i.MX SoC updates for 4.4: - Enable suspend and cpufreq support for i.MX6UL - Add platform level ENET initialization support for i.MX7D * tag 'imx-soc-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: add cpufreq device for imx6ul ARM: imx: add enet init for i.MX7D platform ARM: imx7d: add imx7d iomux-gpr field define ARM: imx: add suspend/resume support for i.mx6ul Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23Merge tag 'v4.3-next-soc' of https://github.com/mbgg/linux-mediatek into ↵Olof Johansson
next/soc Do the initial setting of the pmic wrap interrupt before requesting the interrupt. This fixes the corner-case where the pmic is initialized by the bootloader, but not the pmic watchdog. Add support for active wakeup to the scpsys. This allows to keep the power of a scpsys domain during suspend state. With version v4.3 new subsystem clocks are added to the clock dirver. In late init the kernel turns off all unused clocks. This can provoke a hang if the kernel tries to access the venc and venc_lt power domain registers. Add the necessary parent clocks for this power domains to the scpsys so that no random hang happens. The bootloader of mt6589, mt8135 and mt1827 does not turn on the arm-arch-timer. As there is no opensource bootloader in the near future for this architectures we enable the arch timer at kernel boot. We need the arch timer for SMP boot. Add support for SMP on mt6589, mt8127 and mt8135. * tag 'v4.3-next-soc' of https://github.com/mbgg/linux-mediatek: ARM: mediatek: add smp bringup code ARM: mediatek: enable gpt6 on boot up to make arch timer working soc: mediatek: Fix random hang up issue while kernel init soc: mediatek: add scpsys support active_wakeup soc: mediatek: Move the initial setting of pmic wrap interrupt before requesting irq. Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23Merge tag 'sunxi-core-for-4.4' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/soc Allwinner core changes for 4.4 Add support for the Allwinner R8 SoC used in the CHIP. * tag 'sunxi-core-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: sunxi: Add R8 support Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23ARM: mvebu: add broken-idle optionVincent Donnefort
The broken-idle option can be activated from the coherency-fabric DT node. This property allows to disable the idle capability, when the hardware doesn't support it, like the Seagate Personal Cloud boards. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-10-23ARM: orion5x: use mac_pton() helperAndy Shevchenko
Instead of custom approach let's use generic helper function. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Detlef Vollmann <dv@vollmann.ch> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Tested-by: Detlef Vollmann <dv@vollmann.ch> #on DNS-323 Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-10-19ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte alignedPatrick Doyle
fncpy() requires that the source and the destination are both 8-byte aligned. Signed-off-by: Patrick Doyle <pdoyle@irobot.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: d94e688cae56 ("ARM: at91/pm: move the copying the sram function to the sram initialization phase") Cc: <stable@vger.kernel.org> # 4.1+
2015-10-17ARM: sunxi: Add R8 supportMaxime Ripard
The R8 is a new Allwinner SoC based on the A13. While both are very similar, there's still a few differences. Introduce a new compatible to deal with them. In order to have a consistent naming, instead of mentioning the Allwinner A series as the machine name, switch to sun4i/sun5i like what is done for the other families. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-15Merge tag 'berlin-soc-for-4.4-2' of ↵Arnd Bergmann
git://git.infradead.org/users/hesselba/linux-berlin into next/soc Merge "Marvell Berlin SoC for 4.4 take 2" from Sebastian Hesselbarth: - use the non-self-clearing reset register - add cpu hotplug support * tag 'berlin-soc-for-4.4-2' of git://git.infradead.org/users/hesselba/linux-berlin: arm: berlin: add CPU hotplug support arm: berlin: use non-self-cleared reset register to reset cpu
2015-10-15ARM: digicolor: select pinctrl/gpio driverBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-15Merge tag 'keystone-driver-soc_v2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/soc Merge "ARM Keystone SOC driver updates for 4.4" from Santosh Shilimkar: Documentation and support to be able to load the PDSP firmware necessary for accumulator operation. * tag 'keystone-driver-soc_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: ti: qmss: make acc queue support optional in the driver soc: ti: add firmware file name as part of the driver Documentation: dt: soc: Add description for knav qmss driver
2015-10-15Merge tag 'arm-soc/for-4.4/soc' of http://github.com/Broadcom/stblinux into ↵Arnd Bergmann
next/soc Merge "Broadcom soc changes for v4.4 (try 2)" from Florian Fainelli: This pull request contains the following Broadcom SoC platform and driver changes: - Brian Norris create a drivers/soc/brcmstb/ stub as a place holder for SoC-specific code which is coming next - Florian Fainelli adds support for configuring the BCM7xxx SoCs Bus Interface Unit with their specific write-pairing setting, which must be saved and restored during system-wide suspend/resume, and consequently updates the brcmstb machine code to initialize the BIU - Jon Mason adds support for the Northstar Plus SoCs by introducing a custom machine descriptor matching their compatible string and setting up the PL310 L2 cache and enabling the relevant ARM errata for their Cortex-A9 * tag 'arm-soc/for-4.4/soc' of http://github.com/Broadcom/stblinux: ARM: brcmstb: Setup BIU control registers during boot soc: brcmstb: Add Bus Interface Unit control setup soc: add stubs for brcmstb SoC's ARM: NSP: Add basic support for Broadcom Northstar Plus SoC
2015-10-15Merge tag 'berlin-soc-for-4.4-1' of ↵Arnd Bergmann
git://git.infradead.org/users/hesselba/linux-berlin into next/soc Merge "Marvell SoC for 4.4 take 1" from Sebastian Hesselbarth: - register cpufreq-dt device * tag 'berlin-soc-for-4.4-1' of git://git.infradead.org/users/hesselba/linux-berlin: ARM: berlin: register cpufreq-dt
2015-10-15Merge tag 'berlin64-soc-for-4.4-1' of ↵Arnd Bergmann
git://git.infradead.org/users/hesselba/linux-berlin into next/soc Merge "Marvell Berlin ARM64 SoC for 4.4 take 1" from Sebastian Hesselbarth: - enable ARCH_REQUIRE_GPIOLIB for DW GPIO driver * tag 'berlin64-soc-for-4.4-1' of git://git.infradead.org/users/hesselba/linux-berlin: arm64: berlin: enable ARCH_REQUIRE_GPIOLIB
2015-10-15Merge tag 'mvebu-soc-4.4-1' of git://git.infradead.org/linux-mvebu into next/socArnd Bergmann
Merge "mvebu soc for 4.4 (part 1)" from Gregory CLEMENT: L2 caches optimization for Armada XP * tag 'mvebu-soc-4.4-1' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add support to clear shared L2 bit on Armada XP
2015-10-15arm: berlin: add CPU hotplug supportJisheng Zhang
Add cpu hotplug support for berlin SoCs such as BG2 and BG2Q. These SoC don't support power off cpu independently, but we also want cpu hotplug support in these SoCs. We achieve this goal by putting the dying CPU in WFI state after the coherency is disabled, then asserting the dying CPU reset bit to put the CPU in reset state. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2015-10-15arm: berlin: use non-self-cleared reset register to reset cpuJisheng Zhang
In Berlin SoCs, there are two kinds of cpu reset control registers: the first one's corresponding bits will be self-cleared after some cycles, while the second one's bits won't. Previously the first kind of reset control register is used, this patch uses the second kind one to prepare for the next hotplug commit. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2015-10-14ARM: mediatek: add smp bringup codeYingjoe Chen
Add support for booting secondary CPUs on mt6589, mt8127 and mt8135. Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-10-14ARM: mediatek: enable gpt6 on boot up to make arch timer workingMatthias Brugger
We enable GTP6 which ungates the arch timer clock. In the future this should be done in the bootloader. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
2015-10-14soc: mediatek: Fix random hang up issue while kernel initJames Liao
In kernel late init, it turns off all unused clocks, which needs to access subsystem registers such as VENC and VENC_LT. Accessing MT8173 VENC registers needs two top clocks, mm_sel and venc_sel. Accessing VENC_LT registers needs mm_sel and venclt_sel. So we need to keep these clocks on before accessing their registers. This patch keeps venc_sel / venclt_sel clock on when VENC / VENC_LT's power is on, to prevent system hang up while accessing its registeres. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-10-13soc: ti: qmss: make acc queue support optional in the driverMurali Karicheri
acc channels are available only if accumulator PDSP is loaded and running in the SoC. As this requires firmware and user may not have firmware in the file system, make the accumulator queue support available in qmss driver optional. To use accumulator queus user needs to add firmware to the file system and boot up kernel. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-10-13soc: ti: add firmware file name as part of the driverMurali Karicheri
Currently firmware file name is included in the DTS. This is not scalable as user has to change the DTS if they need upgrade to a new firmware. Instead, add the firmware file name in the driver itself. As long as there is no API change, new firmware upgrade is easy and require no driver change. User is expected to copy the firmware image to the file system and add a sym link to the new firmware for doing an upgrade. Driver add a array of firmware file names to search for the available firmware blobs. This scheme also prepare the driver for future changes to API if ever happens. In such case it is assumed that driver needs to change to accommodate the new firmware and new firmware file name will get added to the array. Also update the DT document to remove the firmware attribute and add description about firmware in the driver documentation. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-10-13Documentation: dt: soc: Add description for knav qmss driverMurali Karicheri
Add documentation for knav qmss driver. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-10-13ARM: S3C64XX: Use PWM lookup table for mach-smartqThierry Reding
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-13ARM: S3C64XX: Use PWM lookup table for mach-hmtThierry Reding
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-13ARM: S3C64XX: Use PWM lookup table for mach-crag6410Thierry Reding
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-13ARM: S3C64XX: Use PWM lookup table for smdk6410Thierry Reding
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-13ARM: S3C24XX: Use PWM lookup table for mach-rx1950Thierry Reding
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-13ARM: S3C24XX: Use PWM lookup table for mach-h1940Thierry Reding
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-12ARM: imx: add cpufreq device for imx6ulBai Ping
Add cpufreq device for i.MX6UL. Using the common cpufreq of i.MX6 SOC. Signed-off-by: Bai Ping <b51503@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-10-09ARM: brcmstb: Setup BIU control registers during bootFlorian Fainelli
Call brcmstb_biuctrl_init() in brcmstb's init_irq machine descriptor callback since we need to setup the Bus Interface Unit before SMP in particular, but we also need to be able to remap registers. Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-10-09soc: brcmstb: Add Bus Interface Unit control setupFlorian Fainelli
Broadcom STB SoCs (brcmstb) require an early setup of their Bus Interface Unit control register, this needs to happen before SMP is brought up because it affects how the CPU complex will be interfaced to the memory controller. Add support code which properly initializes the BIU registers based on whether "brcm,write-pairing" is present in Device Tree, and take care of saving and restoring credit register settings during system-wide suspend/resume operations. Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-10-08ARM: meson: Enable Meson8b SoCsCarlo Caione
Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-06Merge tag 'at91-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/soc Merge "First little batch of SoC changes for 4.4" from Nicolas Ferre: - a MAINTAINER addition to cover SAMA5 SoCs - removal of one unneeded header file - for low-level serial output, use the DEBUG_UART_PHYS * tag 'at91-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91: debug: use DEBUG_UART_PHYS ARM: at91: remove useless includes in platform_data/atmel.h MAINTAINERS: explicitly add Atmel SAMA5
2015-10-06Merge tag 'renesas-soc-for-v4.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Merge "Renesas ARM Based SoC Updates for v4.4" from Simon Horman: * ARM: shmobile: R-Mobile: Use CPG/MSTP Clock Domain attach/detach helpers This part of a multi-stage effort by Geert Uytterhoeven to add: "Clock Domain support to the Clock Pulse Generator (CPG) Module Stop (MSTP) Clocks driver using the generic PM Domain, to be used on shmobile SoCs without device power domains (R-Car Gen1 and Gen2, RZ). This allows to power-manage the module clocks of SoC devices that are part of the CPG/MSTP Clock Domain using Runtime PM, or for system suspend/resume, similar to SoCs with device power domains (SH-Mobile and R-Mobile)." * tag 'renesas-soc-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: R-Mobile: Use CPG/MSTP Clock Domain attach/detach helpers clk: shmobile: mstp: Consider "zb_clk" suitable for power management
2015-10-04Linux 4.3-rc4Linus Torvalds
2015-10-04Merge branch 'strscpy' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull strscpy string copy function implementation from Chris Metcalf. Chris sent this during the merge window, but I waffled back and forth on the pull request, which is why it's going in only now. The new "strscpy()" function is definitely easier to use and more secure than either strncpy() or strlcpy(), both of which are horrible nasty interfaces that have serious and irredeemable problems. strncpy() has a useless return value, and doesn't NUL-terminate an overlong result. To make matters worse, it pads a short result with zeroes, which is a performance disaster if you have big buffers. strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking the insane NUL padding, but having a differently broken return value which returns the original length of the source string. Which means that it will read characters past the count from the source buffer, and you have to trust the source to be properly terminated. It also makes error handling fragile, since the test for overflow is unnecessarily subtle. strscpy() avoids both these problems, guaranteeing the NUL termination (but not excessive padding) if the destination size wasn't zero, and making the overflow condition very obvious by returning -E2BIG. It also doesn't read past the size of the source, and can thus be used for untrusted source data too. So why did I waffle about this for so long? Every time we introduce a new-and-improved interface, people start doing these interminable series of trivial conversion patches. And every time that happens, somebody does some silly mistake, and the conversion patch to the improved interface actually makes things worse. Because the patch is mindnumbing and trivial, nobody has the attention span to look at it carefully, and it's usually done over large swatches of source code which means that not every conversion gets tested. So I'm pulling the strscpy() support because it *is* a better interface. But I will refuse to pull mindless conversion patches. Use this in places where it makes sense, but don't do trivial patches to fix things that aren't actually known to be broken. * 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: use global strscpy() rather than private copy string: provide strscpy() Make asm/word-at-a-time.h available on all architectures
2015-10-04Merge tag 'md/4.3-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md fixes from Neil Brown: "Assorted fixes for md in 4.3-rc. Two tagged for -stable, and one is really a cleanup to match and improve kmemcache interface. * tag 'md/4.3-fixes' of git://neil.brown.name/md: md/bitmap: don't pass -1 to bitmap_storage_alloc. md/raid1: Avoid raid1 resync getting stuck md: drop null test before destroy functions md: clear CHANGE_PENDING in readonly array md/raid0: apply base queue limits *before* disk_stack_limits md/raid5: don't index beyond end of array in need_this_block(). raid5: update analysis state for failed stripe md: wait for pending superblock updates before switching to read-only
2015-10-04Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This week's round of MIPS fixes: - Fix JZ4740 build - Fix fallback to GFP_DMA - FP seccomp in case of ENOSYS - Fix bootmem panic - A number of FP and CPS fixes - Wire up new syscalls - Make sure BPF assembler objects can properly be disassembled - Fix BPF assembler code for MIPS I" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: scall: Always run the seccomp syscall filters MIPS: Octeon: Fix kernel panic on startup from memory corruption MIPS: Fix R2300 FP context switch handling MIPS: Fix octeon FP context switch handling MIPS: BPF: Fix load delay slots. MIPS: BPF: Do all exports of symbols with FEXPORT(). MIPS: Fix the build on jz4740 after removing the custom gpio.h MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MT MIPS: CPS: Don't include MT code in non-MT kernels. MIPS: CPS: Stop dangling delay slot from has_mt. MIPS: dma-default: Fix 32-bit fall back to GFP_DMA MIPS: Wire up userfaultfd and membarrier syscalls.
2015-10-04Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This update contains: - Fix for a long standing race affecting /proc/irq/NNN - One line fix for ARM GICV3-ITS counting the wrong data - Warning silencing in ARM GICV3-ITS. Another GCC trying to be overly clever issue" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Count additional LPIs for the aliased devices irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlined genirq: Fix race in register_irq_proc()
2015-10-04MIPS: scall: Always run the seccomp syscall filtersMarkos Chandras
The MIPS syscall handler code used to return -ENOSYS on invalid syscalls. Whilst this is expected, it caused problems for seccomp filters because the said filters never had the change to run since the code returned -ENOSYS before triggering them. This caused problems on the chromium testsuite for filters looking for invalid syscalls. This has now changed and the seccomp filters are always run even if the syscall is invalid. We return -ENOSYS once we return from the seccomp filters. Moreover, similar codepaths have been merged in the process which simplifies somewhat the overall syscall code. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11236/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Fixes all around the map: W+X kernel mapping fix, WCHAN fixes, two build failure fixes for corner case configs, x32 header fix and a speling fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds x86/mm: Set NX on gap between __ex_table and rodata x86/kexec: Fix kexec crash in syscall kexec_file_load() x86/process: Unify 32bit and 64bit implementations of get_wchan() x86/process: Add proper bound checks in 64bit get_wchan() x86, efi, kasan: Fix build failure on !KASAN && KMEMCHECK=y kernels x86/hyperv: Fix the build in the !CONFIG_KEXEC_CORE case x86/cpufeatures: Correct spelling of the HWP_NOTIFY flag
2015-10-03Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "An abs64() fix in the watchdog driver, and two clocksource driver NO_IRQ assumption fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Fix abs() usage w/ 64bit values clocksource/drivers/keystone: Fix bad NO_IRQ usage clocksource/drivers/rockchip: Fix bad NO_IRQ usage
2015-10-03Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Two EFI fixes: one for x86, one for ARM, fixing a boot crash bug that can trigger under newer EFI firmware" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/efi: Fix boot crash by not padding between EFI_MEMORY_RUNTIME regions x86/efi: Fix boot crash by mapping EFI memmap entries bottom-up at runtime, instead of top-down
2015-10-03Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Bunch of fixes all over the place, all pretty small: amdgpu, i915, exynos, one qxl and one vmwgfx. There is also a bunch of mst fixes, I left some cleanups in the series as I didn't think it was worth splitting up the tested series" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (37 commits) drm/dp/mst: add some defines for logical/physical ports drm/dp/mst: drop cancel work sync in the mstb destroy path (v2) drm/dp/mst: split connector registration into two parts (v2) drm/dp/mst: update the link_address_sent before sending the link address (v3) drm/dp/mst: fixup handling hotplug on port removal. drm/dp/mst: don't pass port into the path builder function drm/radeon: drop radeon_fb_helper_set_par drm: handle cursor_set2 in restore_fbdev_mode drm/exynos: Staticize local function in exynos_drm_gem.c drm/exynos: fimd: actually disable dp clock drm/exynos: dp: remove suspend/resume functions drm/qxl: recreate the primary surface when the bo is not primary drm/amdgpu: only print meaningful VM faults drm/amdgpu/cgs: remove import_gpu_mem drm/i915: Call non-locking version of drm_kms_helper_poll_enable(), v2 drm: Add a non-locking version of drm_kms_helper_poll_enable(), v2 drm/vmwgfx: Fix a command submission hang regression drm/exynos: remove unused mode_fixup() code drm/exynos: remove decon_mode_fixup() drm/exynos: remove fimd_mode_fixup() ...