aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-03bonding: add ad_select attribute netlink supportsfeldma@cumulusnetworks.com
Add IFLA_BOND_AD_SELECT to allow get/set of bonding parameter ad_select via netlink. Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03bonding: add lacp_rate attribute netlink supportsfeldma@cumulusnetworks.com
Add IFLA_BOND_AD_LACP_RATE to allow get/set of bonding parameter lacp_rate via netlink. Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03Merge branch 'tg3'David S. Miller
Nithin Nayak Sujir says: ==================== tg3: Unicast filter support and misc fixes Michael Chan (2): tg3: Refactor __tg3_set_mac_addr() tg3: Add unicast filtering support. Nithin Nayak Sujir (3): tg3: Set the MAC clock to the fastest speed during boot code load tg3: Poll cpmu link state on APE + ASF enabled devices tg3: Update version to 3.136 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03tg3: Update version to 3.136Nithin Sujir
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03tg3: Poll cpmu link state on APE + ASF enabled devicesNithin Sujir
On ASF enabled devices where the mgmt firmware runs on the application processing engine, there is a race between the tg3 driver processing a link change event and the ASF firmware clearing the link changed bit in the EMAC status register. This leads to link notifications to the driver sometimes getting lost. Poll the CPMU link state as a backup for the normal interrupt path update if ASF is enabled. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03tg3: Set the MAC clock to the fastest speed during boot code loadNithin Sujir
On the 5717, 5718 and 5719 devices, the bootcode runs slower when any port doesn't have a link due to clock speed slowing down as part of the link-aware feature. This leads to the driver timing out waiting for the bootcode signature. This patch overrides the clock policy to the highest frequency just before reset and restores it after the bootcode is up. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03tg3: Add unicast filtering support.Michael Chan
Up to 3 additional unicast addresses can be added to the perfect match filter table. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03tg3: Refactor __tg3_set_mac_addr()Michael Chan
so that individual MAC address filter entries can be set. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03llc: make lock staticstephen hemminger
The llc_sap_list_lock does not need to be global, only acquired in core. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03socket: cleanupsstephen hemminger
Namespace related cleaning * make cred_to_ucred static * remove unused sock_rmalloc function Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03sh_eth: coding style fixesSergei Shtylyov
Running 'scripts/checkpatch.pl' on the driver files gives numerous warnings: - block comments using empty /* line; - unneeded \ at end of lines; - message string split across lines; - use of __attribute__((aligned(n))) instead of __aligned(n) macro; - use of __attribute__((packed)) instead of __packed macro. Additionally, running 'scripts/checkpatch.pl --strict' gives more complaints: - including the paragraph about writing to FSF into the heading comment; - alignment not matching open paren; - multiple assignments on one line; - use of CamelCase names; - missing {} on one of the *if* arms where another has them; - spinlock definition without a comment. While fixing these, also do some more style cleanups: - remove useless () around expressions; - add {} around multi-line *if* operator's arm; - remove space before comma; - add spaces after /* and before */; - properly align continuation lines of broken up expressions; - realign comments to the structure fields. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03r8152: fix the wrong return valuehayeswang
The return value should be the boolean value, not the error code. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Spotted-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03smsc9420: use named constants for pci_power_t valuesJulia Lawall
The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2; @@ pci_enable_wake(e1, - 0 + PCI_D0 ,e2) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03Merge branch 'tunnel_dst_caching'David S. Miller
Tom Herbert says: ==================== ipv4: Cache dst in tunnels Version 3 of caching routes in tunnels. Addressed some comments from Eric in this series. There are two patches (variants) in the series: 1) One dst cached for each tunnel. 2) Percpu dst cache per tunnel to avoid false sharing Testing with GRE tunnels on a 32 CPU host with bnx2x (RSS support for GRE) shows a modest improvement in CPU utilization with these patches running 200 TCP_RR netperf clients. Without patches 71.22% CPU utilization 138/180/244 90/95/99% latencies 1.30465e+06 CPU/tps 18318 CPU/tps With patches 69.84% 142/186/249 90/95/99% latencies 1.30827e+06 18732 CPU/tps ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03ipv4: Use percpu Cache route in IP tunnelsTom Herbert
percpu route cache eliminates share of dst refcnt between CPUs. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03ipv4: Cache dst in tunnelsTom Herbert
Avoid doing a route lookup on every packet being tunneled. In ip_tunnel.c cache the route returned from ip_route_output if the tunnel is "connected" so that all the rouitng parameters are taken from tunnel parms for a packet. Specifically, not NBMA tunnel and tos is from tunnel parms (not inner packet). Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03sctp: Add process name and pid to deprecation warningsNeil Horman
Recently I updated the sctp socket option deprecation warnings to be both a bit more clear and ratelimited to prevent user processes from spamming the log file. Ben Hutchings suggested that I add the process name and pid to these warnings so that users can tell who is responsible for using the deprecated apis. This patch accomplishes that. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03net: tulip: delete useless tests on netdev_privJulia Lawall
Netdev_priv performs an addition, not a pointer dereference, so it seems quite unlikely that its result would ever be NULL. A semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ statement S; @@ - if (!netdev_priv(...)) S // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02net: revert "sched classifier: make cgroup table local"Cong Wang
This reverts commit de6fb288b1246a5c4e00c0cdbfe3a838a360b3f4. Otherwise we got: net/sched/cls_cgroup.c:106:29: error: static declaration of ‘net_cls_subsys’ follows non-static declaration static struct cgroup_subsys net_cls_subsys = { ^ In file included from include/linux/cgroup.h:654:0, from net/sched/cls_cgroup.c:18: include/linux/cgroup_subsys.h:35:29: note: previous declaration of ‘net_cls_subsys’ was here SUBSYS(net_cls) ^ make[2]: *** [net/sched/cls_cgroup.o] Error 1 Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02sched classifier: make cgroup table localstephen hemminger
Doesn't need to be global. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02sched action: make local function staticstephen hemminger
No need to export functions only used in one file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02mlx4_en: Only cycle port if HW timestamp config changesShawn Bohrer
If the hwtstamp_config matches what is currently set for the device then simply return. Without this change any program that tries to enable hardware timestamps will cause the link to cycle even if hardware timstamps were already enabled. Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com> Acked-By: Hadar Hen Zion <hadarh@mellanox.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02mlx4_en: Add PTP hardware clockShawn Bohrer
This adds a PHC to the mlx4_en driver. We use reader/writer spinlocks to protect the timecounter since every packet received needs to call timecounter_cycle2time() when timestamping is enabled. This can become a performance bottleneck with RSS and multiple receive queues if normal spinlocks are used. This driver has been tested with both Documentation/ptp/testptp and the linuxptp project (http://linuxptp.sourceforge.net/) on a Mellanox ConnectX-3 card. Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com> Acked-By: Hadar Hen Zion <hadarh@mellanox.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02ipv4: switch and case should be at the same indentWeilong Chen
Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02ipv4: spaces required around that '='Weilong Chen
Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02net: Cleanup in eth-netx.hSachin Kamat
Commit 2960ed346877 ("ARM: netx: move platform_data definitions") moved the file to the current location but forgot to remove the pointer to its previous location. Clean it up. While at it also change the header file protection macros appropriately. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02hamradio: 6pack: fix error return codeJulia Lawall
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02net: fix error return codeJulia Lawall
Set the return variable to propagate any error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02ipv6: remove prune parameter for fib6_clean_allLi RongQing
since the prune parameter for fib6_clean_all always is 0, remove it. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02tipc: make the code look more readablewangweidong
In commit 3b8401fe9d ("tipc: kill unnecessary goto's") didn't make the code look most readable, so fix it. This patch is cosmetic and does not change the operation of TIPC in any way. Suggested-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02tun, rfs: fix the incorrect hash valueZhi Yong Wu
The code incorrectly save the queue index as the hash, so this patch is fixing it with the hash received in the stack receive path. Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02ipv4: arp: update neighbour address when a gratuitous arp is received and ↵Salam Noureddine
arp_accept is set Gratuitous arp packets are useful in switchover scenarios to update client arp tables as quickly as possible. Currently, the mac address of a neighbour is only updated after a locktime period has elapsed since the last update. In most use cases such delays are unacceptable for network admins. Moreover, the "updated" field of the neighbour stucture doesn't record the last time the address of a neighbour changed but records any change that happens to the neighbour. This is clearly a bug since locktime uses that field as meaning "addr_updated". With this observation, I was able to perpetuate a stale address by sending a stream of gratuitous arp packets spaced less than locktime apart. With this change the address is updated when a gratuitous arp is received and the arp_accept sysctl is set. Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01ipv6: namespace cleanupsstephen hemminger
Running 'make namespacecheck' shows: net/ipv6/route.o ipv6_route_table_template rt6_bind_peer net/ipv6/icmp.o icmpv6_route_lookup ipv6_icmp_table_template This addresses some of those warnings by: * make icmpv6_route_lookup static * move inline's out of ip6_route.h since only used into route.c * move rt6_bind_peer into route.c Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01net: core functions cleanupstephen hemminger
The following functions are not used outside of net/core/dev.c and should be declared static. call_netdevice_notifiers_info __dev_remove_offload netdev_has_any_upper_dev __netdev_adjacent_dev_remove __netdev_adjacent_dev_link_lists __netdev_adjacent_dev_unlink_lists __netdev_adjacent_dev_unlink __netdev_adjacent_dev_link_neighbour __netdev_adjacent_dev_unlink_neighbour And the following are never used and should be deleted netdev_lower_dev_get_private_rcu __netdev_find_adj_rcu Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01netlink: cleanup tap related functionsstephen hemminger
Cleanups in netlink_tap code * remove unused function netlink_clear_multicast_users * make local function static Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bonding: make more functions staticstephen hemminger
More functions in bonding that can be declared static because they are only used in one file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01netlink: cleanup rntl_af_registerstephen hemminger
The function __rtnl_af_register is never called outside this code, and the return value is always 0. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01stmicro: make local variables staticstephen hemminger
Make variables only used in one file static. Also avoids possible namespace collisions. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series implements the Linux Virtual Function (VF) driver for the Intel Ethernet Controller XL710 family. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01Merge branch 'bonding'David S. Miller
Ding Tianhong says: ==================== bonding: slight optimization for bonding This serious of patches will slight optimize the mac address compare and xmit path for bonding, also make some cleanups. Julia was using ether_addr_equal_64bits to instead of ether_addr_equal, it is really a hard work and she may did not make patch for bonding yet, so I have do it in this patchset and that she could miss the bonding drivers. resend and add cc for Julia. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bonding: use ether_addr_equal_64bits to instead of ether_addr_equaldingtianhong
The net_device.dev_addr have more than 2 bytes of additional data after the mac addr, so it is safe to use the ether_addr_equal_64bits(). Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bonding: remove the return value for bond_3ad_bind_slave()dingtianhong
I'm sure the operand slave and bond for the function will not be NULL, so the check for the bond will not make any sense, so remove the judgement, and the return value was useless here, remove the unwanted return value. The comments for the bond 3ad is too old, cleanup some errors and warming. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bonding: remove unwanted return value for bond_dev_queue_xmit()dingtianhong
The return value for bond_dev_queue_xmit() will not be used anymore, so remove the return value. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bonding: slight optimizztion for bond_slave_override()dingtianhong
When the skb is xmit by the function bond_slave_override(), it will have duplicate judgement for slave state, and I think it will consumes a little performance, maybe it is negligible, so I simplify the function and remove the unwanted judgement. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bonding: slight optimization for bond_alb_xmit()dingtianhong
The bond_alb_xmit will check the return value for bond_dev_queue_xmit() every time, but the bond_dev_queue_xmit() is always return 0, it is no need to check the value every time, so remove the unneed judgement for the xmit path. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bonding: slight optimization for bond_3ad_xmit_xor()dingtianhong
The bond_dev_queue_xmit() will always return 0, and as a fast path, it is inappropriate to check the res value when xmit every package, so remove the res check and avoid once judgement for xmit. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01bonding: use ether_addr_equal_unaligned for bond addr comparedingtianhong
Use possibly more efficient ether_addr_equal_64bits to instead of memcmp. Modify the MAC_ADDR_COMPARE to MAC_ADDR_EQUAL, this looks more appropriate. The comments for the bond 3ad is too old, cleanup some errors and warming. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01Merge branch 'r8152'David S. Miller
Hayes Wang says: ==================== support new chip Remove the trailing "/* CRC */" for patch #3. Change the return value type of rtl_ops_init() from int to boolean for patch #4. Replace VENDOR_ID_SAMSUNG with SAMSUNG_VENDOR_ID for patch #6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01r8152: support RTL8153hayeswang
Support new chip RTL8153 which is the USB 3.0 giga ethernet adapter. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01r8152: split rtl8152_enablehayeswang
Split the contents of rtl8152_enable() into rtl_set_eee_plus() and rtl_enable(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 09:18:05 +0000