aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-21mfd: Add TI TPS80031 mfd core driverLaxman Dewangan
TPS80031/ TPS80032 Fully Integrated Power Management with Power Path and Battery Charger. The device provides five configurable step-down converters, 11 general purpose LDOs, USB OTG Module, ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with Power Path from USB, 32K clock generator. Add the mfd core driver for TPS80031/TPS80032. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: wm5102: Mark some more status registers as volatileMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: wm5102: Update maximum registerMark Brown
The DSP memories are mapped into the register map, make them readable and writable by updating max_register appropriately. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Add myself to copyrightDavide Ciminaghi
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Add defines for some sta2x11 sctl registersDavide Ciminaghi
These are required for the clock infrastructure code to properly configure and control the sta2x11 PLLs. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Add scr (otp registers) platform driverDavide Ciminaghi
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Use one lock per device instead of one lock per mfdDavide Ciminaghi
The lock is used to implement atomic operations on each platform device's registers, so it looks reasonable having one lock per device instead of one common lock for all the devices belonging to the same sta2x11 instance. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Do not mind about gpio platform dataDavide Ciminaghi
The gpio platform driver will take care of its platform data, let's not do any checks here. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Only add sta2x11_mfd if it hasn't already been addedDavide Ciminaghi
The pci probe method is called twice now, so we have to call sta2x11_mfd_add() only once to avoid a -EBUSY error. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Use defines for platform devices' namesDavide Ciminaghi
Since there are now many sta2x11-mfd platform devices, using defines for their names looks like a better solution. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Add sta2x11_mfd_get_regs_data() functionDavide Ciminaghi
A couple of predefined clocks (mux and gated) need to be initialized with the virtual address of the clock's controlling register and the address of a spinlock used to protect against races. This function exports such data for all the mfd cells. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Add regmap supportDavide Ciminaghi
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: sta2x11-mfd: Add apb-soc regs driver and factor out common codeDavide Ciminaghi
A driver for the apb-soc registers is needed by the clock infrastructure code to configure and control clocks on the sta2x11 chip. Since some of the functions in sta2x11-mfd.c were almost identical for the two existing platform devices, the following changes have been performed to avoid further code duplication while adding the apb-soc-regs driver: * The sctl_regs and apbreg_regs fields in struct sta2x11_mfd have been turned into just one array of pointers accessed by device index. * Platform probe methods have become one-liners invoking a common probe with the device's index as second parameter. * For loops have been inserted where the same operations were performed for each of the two bars of a pci device. * The apbreg_mask and sctl_mask functions were almost identical, so they were turned into inline functions invoking a common __sta2x11_mfd_mask() with the platform device's index as last parameter. To do this, enum sta2x11_mfd_plat_dev has been declared in sta2x11-mfd.h and more device types have been added to it. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mmc: rtsx: Remove a duplicate command in sd_rw_multiWei WANG
Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20iio: adc: Add viperboard adc driverLars Poeschel
This adds the mfd cell to use the adc part of the Nano River Technologies viperboard. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20i2c: Add viperboard i2c master driverLars Poeschel
This adds the mfd cell to use the i2c part of the Nano River Technologies viperboard as i2c master. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20gpio: Add viperboard gpio driverLars Poeschel
This adds the mfd cell to use the gpio a and gpio b part of the Nano River Technologies viperboard. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: Add viperboard driverLars Poeschel
Add mfd driver for Nano River Technologies viperboard. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: Only unregister platform devices allocated by the mfd coreCharles Keepax
mfd_remove_devices would iterate over all devices sharing a parent with an mfd device regardless of whether they were allocated by the mfd core or not. This especially caused problems when the device structure was not contained within a platform_device, because to_platform_device is used on each device pointer. This patch defines a device_type for mfd devices and checks this is present from mfd_remove_devices_fn before processing the device. Cc: stable@vger.kernel.org Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by: Peter Tyser <ptyser@xes-inc.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20gpio: gpio-da9052: Convert to the new da9052 interrupt functionsFabio Estevam
Convert to the new da9052 interrupt functions, so that we can get rid of irq_base references. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20power: da9052-battery: Convert to the new da9052 interrupt functionsFabio Estevam
Convert to the new da9052 interrupt functions, so that we can get rid of irq_base references. Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20Input: da9052_onkey.c: Convert to the new da9052 interrupt functions.Fabio Estevam
Use the new da9052 irq functions and allow the driver to probe successfully. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: <linux-input@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20Input: da9052_tsi.c: Fix interrupt handlingFabio Estevam
Currently da9062_tsi does not probe and it fails as follows: da9052 1-0048: Unable to determine device interrupts Use the new da9052 irq functions and allow the driver to probe and operate correctly. Tested on mx53qsb board using 'evtest' tool. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: <linux-input@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: da9052: Introduce da9052-irq.cFabio Estevam
Create a da9052-irq.c file so that it can handle interrupt related functions. This is useful for allowing the da9052 drivers to use such functions when dealing with da9052 interrupts. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: da9052-core: Use regmap_irq_get_virq() and fix the probeFabio Estevam
On a mx53qsb dt-kernel the da9052-core driver fails to probe as follows: da9052 1-0048: DA9052 ADC IRQ failed ret=-22 The reason for the error was due to passing only the offset as the interrupt number in request_threaded_irq() without da9052->irq_base. The recommended approach though is to use regmap_get_virq() to acquire the interrupt number and this allows to get rid of da9052->irq_base. Fix it and allow the driver to probe successfully. Also provide a few more error logs and change the irq string to "adc-irq", so that it appears as a single word in 'cat /proc/interrupts' Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: tps65910: Pass irq_domain when adding mfd sub devicesLaxman Dewangan
When adding the sub device "tps65910-rtc", is it passed the IO resource IRQ for the interrupt number. This interrupt needs to map in the device irq domain. Pass the irq domain of device in mfd_add_devices() so that proper irq mapping can be done when adding the sub device RTC. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: tps65910: Move interrupt implementation code to mfd fileLaxman Dewangan
In place of implementing the irq support in separate file, moving implementation to main mfd file. The irq files only contains the table and init steps only and does not need extra file to have this only for this purpose. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: tps65910: Use regmap irq framework for interrupt supportLaxman Dewangan
Implement irq support of tps65910 with regmap irq framework in place of implementing locally. This reduces the code size significantly and easy to maintain. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20mfd: tps65910: Initialize mfd devices after all initialization doneLaxman Dewangan
Add sub devices of tps65910 after all initialization like interrupt, clock etc. is done. This will make sure that require data gets initialized properly before sub devices probe's get called. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20Merge tag 'lock' of ↵Samuel Ortiz
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into for-next regmap: Customisable lock functions Allow maps to replace the lock function for integration with dynamic register accessability states.
2012-11-20Merge tag 'topic/domain' of ↵Samuel Ortiz
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into for-next
2012-11-13mfd: Implement tps6586x gpio_to_irqLaxman Dewangan
The TPS6586x adds the interrupt of this device using linear mapping on irq domain. Hence, implement gpio_to_irq to get the irq number corresponding to TPS6586x GPIOs which is created dynamically. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-13mfd: Add irq io-resource for tps6586x rtc sub driverLaxman Dewangan
Add IRQ IORESOURCE for rtc sub driver of this device. The rtc driver can get the irq by calling platform_get_irq(). Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-13mfd: Convert tps6586x to irq_domainLaxman Dewangan
Allocate the irq base if it base is not porvided i.e. in case of device tree invocation of this driver. Convert the tps6586x driver to irq domain, using a legacy IRQ mapping if an irq_base is specified in platform data or dynamically allocated and otherwise using a linear mapping. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-13mfd: twl6040: Rename the core driverPeter Ujfalusi
After the regmap_irq conversion there is no need to call the driver as twl6040-core.c since there is only one c file remained. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-13mfd: twl6040: Convert to use regmap_irqPeter Ujfalusi
With regmap_irq it is possible to remove the twl6040-irq.c file and simplify the code. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-13mfd: twl6040: Correct Ready and Thermal interrupt handlingPeter Ujfalusi
Create new irq handler for thermal events in order to be able to handle the event and clean up the code regarding to interrupt handling: Use proper function names for the irq handlers No need to read the INTD register anymore. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-13mfd: twl6040: Restructure power up and down codePeter Ujfalusi
Rearrange the code path for power up and down sequence. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-13mfd: twl6040: Remove unused parameter for twl6040_power_up_completion()Peter Ujfalusi
naudint parameter has not been used, remove it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-13mfd: twl6040: Fix typo for power on failurePeter Ujfalusi
Fix old copy paste bug: automatic power-down failed -> automatic power-up failed Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-12mfd: Remove Unicode Byte Order Marks from da9055Geert Uytterhoeven
Older gcc (< 4.4) doesn't like files starting with Unicode BOMs: include/linux/mfd/da9055/core.h:1: error: stray ‘\357’ in program include/linux/mfd/da9055/core.h:1: error: stray ‘\273’ in program include/linux/mfd/da9055/core.h:1: error: stray ‘\277’ in program include/linux/mfd/da9055/pdata.h:1: error: stray ‘\357’ in program include/linux/mfd/da9055/pdata.h:1: error: stray ‘\273’ in program include/linux/mfd/da9055/pdata.h:1: error: stray ‘\277’ in program include/linux/mfd/da9055/reg.h:1: error: stray ‘\357’ in program include/linux/mfd/da9055/reg.h:1: error: stray ‘\273’ in program include/linux/mfd/da9055/reg.h:1: error: stray ‘\277’ in program Remove the BOMs, the rest of the files is plain ASCII anyway. Output of "file" before: include/linux/mfd/da9055/core.h: UTF-8 Unicode (with BOM) C program text include/linux/mfd/da9055/pdata.h: UTF-8 Unicode (with BOM) C program text include/linux/mfd/da9055/reg.h: UTF-8 Unicode (with BOM) C program text Output of "file" after: include/linux/mfd/da9055/core.h: ASCII C program text include/linux/mfd/da9055/pdata.h: ASCII C program text include/linux/mfd/da9055/reg.h: ASCII C program text Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-11mfd: Differentiate between u8500 and u9540 TCDM address mappingLee Jones
The TCDM mappings are quite different from u8500 to u9540. If these aren't correctly specified for a given board, it will fail to boot. Here we add the correct TCDM base for the u9540. Please note that although this patch allows us to boot the u9540, it doesn't provide us with full enablement. For that, another patch-set will follow which completely re-vamps the way the PRCMU is passed TCDM mappings. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-11mfd: ab8500-core: Use devm_* memory/IRQ and allocation/free routinesLee Jones
It is better to use devm_* calls, as they allow for easier and more automatic clean-up. Resources are device allocated, so when a device is freed, so are all associated resources. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-11Documentation: Describe bindings for STMPE Multi-Functional Device driverLee Jones
Here we add the required documentation for the STMPE Multi-Functional Device (MFD) Device Tree bindings. It describes all of the bindings currently supported by the driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-11mfd: Enable the STMPE MFD for Device TreeLee Jones
This patch allows the STMPE Multi-Functional Device to be correctly initialised when booting with Device Tree support enabled. Its children are specified by the addition of subordinate devices to the STMPE node in the Device Tree file. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-11mfd: Correct copy and paste mistake in stmpeLee Jones
When specifying IRQ numbers for the stmpe1601, IRQ defines for the stmpe24xx were used instead. Fortunately, the defined numbers are the same, hence why it survived testing. This fix is merely an aesthetic one. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-11mfd: Provide the STMPE driver with its own IRQ domainLee Jones
The STMPE driver is yet another IRQ controller which requires its own IRQ domain. So, we provide it with one. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-11mfd: Prevent STMPE from abusing mfd_add_devices' irq_base parameterLee Jones
Originally IRQ incrementers were provided in some template resource structures for keypad and touchscreen devices. These were passed as IORESOURCE_IRQs to MFD core in the usual way. The true device IRQs were instead added to the irq_base when mfd_add_devices was invoked. This is clearly an abuse of the call, and does not scale when IRQ Domains are brought into play. Before we can provide the STMPE with its own IRQ Domain we must first fix this. This patche keeps most of the driver's structure, keeping the template strategy. However, instead of providing the IRQ as an increment to irq_base, we dynamically populate the IORESOURCE_IRQ with the correct device IRQ. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-11mfd: ab8500-core: Remove unused ab8500-gpio IRQ rangesLee Jones
The IRQ ranges provided in ab8500-core to be passed on to the ab8500-gpio driver are not only redundant, but they are also causing a warning in the boot log. These IRQ ranges, like any other MFD related IRQ resource are passed though MFD core for automatic conversion to virtual IRQs; however, MFD core does not support IRQ mapping of IRQ ranges. Let's just remove them. Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-09mfd: Explicitely include slab.h to rtsxSamuel Ortiz
This fixes the following build error on some architectures (parisc at least): drivers/mfd/rtsx_pcr.c: In function 'rtsx_pci_init_chip': drivers/mfd/rtsx_pcr.c:985:2: error: implicit declaration of function 'kcalloc' [-Werror=implicit-function-declaration] drivers/mfd/rtsx_pcr.c:985:13: warning: assignment makes pointer from integer without a cast [enabled by default] Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 23:58:00 +0000