| Age | Commit message (Collapse) | Author |
|---|
|
The SCMI v3.1 adds support for power values in micro-Watts. They are not
always in milli-Watts anymore (ignoring the bogo-Watts). Thus, the power
must be converted conditionally before sending to Energy Model. Add the
logic which handles the needed checks and conversions.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In SCMI v3.1 the power scale can be in micro-Watts. The upper layers, e.g.
cpufreq and EM should handle received power values properly (upscale when
needed). Thus, provide an interface which allows to check what is the
scale for power values. The old interface allowed to distinguish between
bogo-Watts and milli-Watts only (which was good for older SCMI spec).
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The EM now uses the micro-Watts scale for the power values. Update
related documentation to reflect that fact.
Fix also a problematic sentence in the doc "to:" which triggers test
scripts complaining about wrong email address.
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The milli-Watts precision causes rounding errors while calculating
efficiency cost for each OPP. This is especially visible in the 'simple'
Energy Model (EM), where the power for each OPP is provided from OPP
framework. This can cause some OPPs to be marked inefficient, while
using micro-Watts precision that might not happen.
Update all EM users which access 'power' field and assume the value is
in milli-Watts.
Solve also an issue with potential overflow in calculation of energy
estimation on 32bit machine. It's needed now since the power value
(thus the 'cost' as well) are higher.
Example calculation which shows the rounding error and impact:
power = 'dyn-power-coeff' * volt_mV * volt_mV * freq_MHz
power_a_uW = (100 * 600mW * 600mW * 500MHz) / 10^6 = 18000
power_a_mW = (100 * 600mW * 600mW * 500MHz) / 10^9 = 18
power_b_uW = (100 * 605mW * 605mW * 600MHz) / 10^6 = 21961
power_b_mW = (100 * 605mW * 605mW * 600MHz) / 10^9 = 21
max_freq = 2000MHz
cost_a_mW = 18 * 2000MHz/500MHz = 72
cost_a_uW = 18000 * 2000MHz/500MHz = 72000
cost_b_mW = 21 * 2000MHz/600MHz = 70 // <- artificially better
cost_b_uW = 21961 * 2000MHz/600MHz = 73203
The 'cost_b_mW' (which is based on old milli-Watts) is misleadingly
better that the 'cost_b_uW' (this patch uses micro-Watts) and such
would have impact on the 'inefficient OPPs' information in the Cpufreq
framework. This patch set removes the rounding issue.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
This is a collection of three fixes for small annoyances.
Two of these are already pending in other trees, but I really don't want
to release another -rc with these issues pending, so I picked up the
patches for these things directly. We'll end up with duplicate commits
eventually, I prefer that over having these issues pending.
The third one is just me getting rid of another BUG_ON() just because it
was reported and I dislike those things so much.
* merge 'hot-fixes' branch:
ida: don't use BUG_ON() for debugging
drm/aperture: Run fbdev removal before internal helpers
ptrace: fix clearing of JOBCTL_TRACED in ptrace_unfreeze_traced()
|
|
This is another old BUG_ON() that just shouldn't exist (see also commit
a382f8fee42c: "signal handling: don't use BUG_ON() for debugging").
In fact, as Matthew Wilcox points out, this condition shouldn't really
even result in a warning, since a negative id allocation result is just
a normal allocation failure:
"I wonder if we should even warn here -- sure, the caller is trying to
free something that wasn't allocated, but we don't warn for
kfree(NULL)"
and goes on to point out how that current error check is only causing
people to unnecessarily do their own index range checking before freeing
it.
This was noted by Itay Iellin, because the bluetooth HCI socket cookie
code does *not* do that range checking, and ends up just freeing the
error case too, triggering the BUG_ON().
The HCI code requires CAP_NET_RAW, and seems to just result in an ugly
splat, but there really is no reason to BUG_ON() here, and we have
generally striven for allocation models where it's always ok to just do
free(alloc());
even if the allocation were to fail for some random reason (usually
obviously that "random" reason being some resource limit).
Fixes: 88eca0207cf1 ("ida: simplified functions for id allocation")
Reported-by: Itay Iellin <ieitayie@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"One core fix for DMA_INTERRUPT and rest driver fixes.
Core:
- Revert verification of DMA_INTERRUPT capability as that was
incorrect
Bunch of driver fixes for:
- ti: refcount and put_device leak
- qcom_bam: runtime pm overflow
- idxd: force wq context cleanup and call idxd_enable_system_pasid()
on success
- dw-axi-dmac: RMW on channel suspend register
- imx-sdma: restart cyclic channel when enabled
- at_xdma: error handling for at_xdmac_alloc_desc
- pl330: lockdep warning
- lgm: error handling path in probe
- allwinner: Fix min/max typo in binding"
* tag 'dmaengine-fix-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dt-bindings: dma: allwinner,sun50i-a64-dma: Fix min/max typo
dmaengine: lgm: Fix an error handling path in intel_ldma_probe()
dmaengine: pl330: Fix lockdep warning about non-static key
dmaengine: idxd: Only call idxd_enable_system_pasid() if succeeded in enabling SVA feature
dmaengine: at_xdma: handle errors of at_xdmac_alloc_desc() correctly
dmaengine: imx-sdma: only restart cyclic channel when enabled
dmaengine: dw-axi-dmac: Fix RMW on channel suspend register
dmaengine: idxd: force wq context cleanup on device disable path
dmaengine: qcom: bam_dma: fix runtime PM underflow
dmaengine: imx-sdma: Allow imx8m for imx7 FW revs
dmaengine: Revert "dmaengine: add verification of DMA_INTERRUPT capability for dmatest"
dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate
dmaengine: ti: Fix refcount leak in ti_dra7_xbar_route_allocate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for a reported problem that showed
up in 5.19-rc1 in the wlan-ng driver. It has been in linux-next for a
week with no reported problems"
* tag 'staging-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging/wlan-ng: get the correct struct hfa384x in work callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are four small char/misc driver fixes for 5.19-rc6 to resolve
some reported issues. They only affect two drivers:
- rtsx_usb: fix for of-reported DMA warning error, the driver was
handling memory buffers in odd ways, it has now been fixed up to be
much simpler and correct by Shuah.
- at25 eeprom driver bugfix for reported problem
All of these have been in linux-next for a week with no reported
problems"
* tag 'char-misc-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx_usb: set return value in rsp_buf alloc err path
misc: rtsx_usb: use separate command and response buffers
misc: rtsx_usb: fix use of dma mapped buffer for usb bulk transfer
eeprom: at25: Rework buggy read splitting
|
|
Pull io_uring fix from Jens Axboe:
"A single fix for an issue that came up yesterday that we should plug
for -rc6.
This is a regression introduced in this cycle"
* tag 'io_uring-5.19-2022-07-09' of git://git.kernel.dk/linux-block:
io_uring: check that we have a file table when allocating update slots
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Adjust gen_compile_commands.py to the format change of *.mod files
- Remove unused macro in scripts/Makefile.modinst
* tag 'kbuild-fixes-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: remove unused cmd_none in scripts/Makefile.modinst
gen_compile_commands: handle multiple lines per .mod file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Gracefully handle failure to request MMIO resources in the GICv3
driver
- Make a static key static in the Apple AIC driver
- Fix the Xilinx intc driver dependency on OF_ADDRESS
* tag 'irq_urgent_for_v5.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/apple-aic: Make symbol 'use_fast_ipi' static
irqchip/xilinx: Add explicit dependency on OF_ADDRESS
irqchip/gicv3: Handle resource request failure consistently
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Prepare for and clear .brk early in order to address XenPV guests
failures where the hypervisor verifies page tables and uninitialized
data in that range leads to bogus failures in those checks
- Add any potential setup_data entries supplied at boot to the identity
pagetable mappings to prevent kexec kernel boot failures. Usually,
this is not a problem for the normal kernel as those mappings are
part of the initially mapped 2M pages but if kexec gets to allocate
the second kernel somewhere else, those setup_data entries need to be
mapped there too.
- Fix objtool not to discard text references from the __tracepoints
section so that ENDBR validation still works
- Correct the setup_data types limit as it is user-visible, before 5.19
releases
* tag 'x86_urgent_for_v5.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Fix the setup data types max limit
x86/ibt, objtool: Don't discard text references from tracepoint section
x86/compressed/64: Add identity mappings for setup_data entries
x86: Fix .brk attribute in linker script
x86: Clear .brk area at early boot
x86/xen: Use clear_bss() for Xen PV guests
|
|
Commit 65ce9c38326e ("kbuild: move module strip/compression code into
scripts/Makefile.modinst") added this unused code.
Perhaps, I thought cmd_none was useful for CONFIG_MODULE_COMPRESS_NONE,
but I did not use it after all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Commit in Fixes forgot to change the SETUP_TYPE_MAX definition which
contains the highest valid setup data type.
Correct that.
Fixes: 5ea98e01ab52 ("x86/boot: Add Confidential Computing type to setup_data")
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/ddba81dd-cc92-699c-5274-785396a17fb5@zytor.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two I2C driver bugfixes preventing resource leaks"
* tag 'i2c-for-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cadence: Unregister the clk notifier in error path
i2c: piix4: Fix a memory leak in the EFCH MMIO support
|
|
Always run fbdev removal first to remove simpledrm via sysfb_disable().
This clears the internal state.
The later call to drm_aperture_detach_drivers() then does nothing.
Otherwise, with drm_aperture_detach_drivers() running first, the call to
sysfb_disable() uses inconsistent state.
Example backtrace show below:
BUG: KASAN: use-after-free in device_del+0x79/0x5f0
Read of size 8 at addr ffff888108185050 by task systemd-udevd/311
CPU: 0 PID: 311 Comm: systemd-udevd Tainted: G E 5.19.0-rc2-1-default+ #1689
Hardware name: HP ProLiant DL120 G7, BIOS J01 04/21/2011
Call Trace:
device_del+0x79/0x5f0
platform_device_del.part.0+0x19/0xe0
platform_device_unregister+0x1c/0x30
sysfb_disable+0x2d/0x70
remove_conflicting_framebuffers+0x1c/0xf0
remove_conflicting_pci_framebuffers+0x130/0x1a0
drm_aperture_remove_conflicting_pci_framebuffers+0x86/0xb0
mgag200_pci_probe+0x2d/0x140 [mgag200]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 873eb3b11860 ("fbdev: Disable sysfb device registration when removing conflicting FBs")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CI reported the following splat while running the strace testsuite:
WARNING: CPU: 1 PID: 3570031 at kernel/ptrace.c:272 ptrace_check_attach+0x12e/0x178
CPU: 1 PID: 3570031 Comm: strace Tainted: G OE 5.19.0-20220624.rc3.git0.ee819a77d4e7.300.fc36.s390x #1
Hardware name: IBM 3906 M04 704 (z/VM 7.1.0)
Call Trace:
[<00000000ab4b645a>] ptrace_check_attach+0x132/0x178
([<00000000ab4b6450>] ptrace_check_attach+0x128/0x178)
[<00000000ab4b6cde>] __s390x_sys_ptrace+0x86/0x160
[<00000000ac03fcec>] __do_syscall+0x1d4/0x200
[<00000000ac04e312>] system_call+0x82/0xb0
Last Breaking-Event-Address:
[<00000000ab4ea3c8>] wait_task_inactive+0x98/0x190
This is because JOBCTL_TRACED is set, but the task is not in TASK_TRACED
state. Caused by ptrace_unfreeze_traced() which does:
task->jobctl &= ~TASK_TRACED
but it should be:
task->jobctl &= ~JOBCTL_TRACED
Fixes: 31cae1eaae4f ("sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- On Power8 bare metal, fix creation of RNG platform devices, which are
needed for the /dev/hwrng driver to probe correctly.
Thanks to Jason A. Donenfeld, and Sachin Sant.
* tag 'powerpc-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: delay rng platform device creation until later in boot
|
|
If IORING_FILE_INDEX_ALLOC is set asking for an allocated slot, the
helper doesn't check if we actually have a file table or not. The non
alloc path does do that correctly, and returns -ENXIO if we haven't set
one up.
Do the same for the allocated path, avoiding a NULL pointer dereference
when trying to find a free bit.
Fixes: a7c41b4687f5 ("io_uring: let IORING_OP_FILES_UPDATE support choosing fixed file slots")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache fixes from David Howells:
- Fix a check in fscache_wait_on_volume_collision() in which the
polarity is reversed. It should complain if a volume is still marked
acquisition-pending after 20s, but instead complains if the mark has
been cleared (ie. the condition has cleared).
Also switch an open-coded test of the ACQUIRE_PENDING volume flag to
use the helper function for consistency.
- Not a fix per se, but neaten the code by using a helper to check for
the DROPPED state.
- Fix cachefiles's support for erofs to only flush requests associated
with a released control file, not all requests.
- Fix a race between one process invalidating an object in the cache
and another process trying to look it up.
* tag 'fscache-fixes-20220708' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Fix invalidation/lookup race
cachefiles: narrow the scope of flushed requests when releasing fd
fscache: Introduce fscache_cookie_is_dropped()
fscache: Fix if condition in fscache_wait_on_volume_collision()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two recent regressions related to CPPC support.
Specifics:
- Prevent _CPC from being used if the platform firmware does not
confirm CPPC v2 support via _OSC (Mario Limonciello)
- Allow systems with X86_FEATURE_CPPC set to use _CPC even if CPPC
support cannot be agreed on via _OSC (Mario Limonciello)"
* tag 'acpi-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported
ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a NULL pointer dereference in a devfreq driver and a runtime
PM framework issue that may cause a supplier device to be suspended
before its consumer.
Specifics:
- Fix NULL pointer dereference related to printing a diagnostic
message in the exynos-bus devfreq driver (Christian Marangi)
- Fix race condition in the runtime PM framework which in some cases
may cause a supplier device to be suspended when its consumer is
still active (Rafael Wysocki)"
* tag 'pm-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: exynos-bus: Fix NULL pointer dereference
PM: runtime: Fix supplier device management during consumer probe
PM: runtime: Redefine pm_runtime_release_supplier()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Vishal Verma:
- Update MAINTAINERS for Ben's email
- Fix cleanup of port devices on failure to probe driver
- Fix endianness in get/set LSA mailbox command structures
- Fix memregion_free() fallback definition
- Fix missing variable payload checks in CXL cmd size validation
* tag 'cxl-fixes-for-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/mbox: Fix missing variable payload checks in cmd size validation
memregion: Fix memregion_free() fallback definition
cxl/mbox: Use __le32 in get,set_lsa mailbox structures
cxl/core: Use is_endpoint_decoder
cxl: Fix cleanup of port devices on failure to probe driver.
MAINTAINERS: Update Ben's email address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- fix device setup failures in the Intel VT-d driver when the PASID
table is shared
- fix Intel VT-d device hot-add failure due to wrong device notifier
order
- remove the old IOMMU mailing list from the MAINTAINERS file now that
it has been retired
* tag 'iommu-fixes-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
MAINTAINERS: Remove iommu@lists.linux-foundation.org
iommu/vt-d: Fix RID2PASID setup/teardown failure
iommu/vt-d: Fix PCI bus rescan device hot add
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a build error in gpio-vf610
- fix a null-pointer dereference in the GPIO character device code
* tag 'gpio-fixes-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: cdev: fix null pointer dereference in linereq_free()
gpio: vf610: fix compilation error
|
|
Merge a runtime PM framework cleanup and fix related to device links.
* pm-core:
PM: runtime: Fix supplier device management during consumer probe
PM: runtime: Redefine pm_runtime_release_supplier()
|
|
Pull block fixes from Jens Axboe:
"NVMe pull request with another id quirk addition, and a tracing fix"
* tag 'block-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
nvme: use struct group for generic command dwords
nvme-pci: phison e16 has bogus namespace ids
|
|
Pull io_uring tweak from Jens Axboe:
"Just a minor tweak to an addition made in this release cycle: padding
a 32-bit value that's in a 64-bit union to avoid any potential
funkiness from that"
* tag 'io_uring-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
io_uring: explicit sqe padding for ioctl commands
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- fbcon now prevents switching to screen resolutions which are smaller
than the font size, and prevents enabling a font which is bigger than
the current screen resolution. This fixes vmalloc-out-of-bounds
accesses found by KASAN.
- Guiling Deng fixed a bug where the centered fbdev logo wasn't
displayed correctly if the screen size matched the logo size.
- Hsin-Yi Wang provided a patch to include errno.h to fix build when
CONFIG_OF isn't enabled.
* tag 'for-5.19/fbdev-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbcon: Use fbcon_info_from_console() in fbcon_modechange_possible()
fbmem: Check virtual screen sizes in fb_set_var()
fbcon: Prevent that screen size is smaller than font size
fbcon: Disallow setting font bigger than screen size
video: of_display_timing.h: include errno.h
fbdev: fbmem: Fix logo center image dx issue
|
|
The IOMMU mailing list has moved to iommu@lists.linux.dev
and the old list should bounce by now. Remove it from the
MAINTAINERS file.
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220706103331.10215-1-joro@8bytes.org
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.19
- another bogus identifier quirk (Keith Busch)
- use struct group in the tracer to avoid a gcc warning (Keith Busch)"
* tag 'nvme-5.19-2022-07-07' of git://git.infradead.org/nvme:
nvme: use struct group for generic command dwords
nvme-pci: phison e16 has bogus namespace ids
|
|
32 bit sqe->cmd_op is an union with 64 bit values. It's always a good
idea to do padding explicitly. Also zero check it in prep, so it can be
used in the future if needed without compatibility concerns.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e6b95a05e970af79000435166185e85b196b2ba2.1657202417.git.asml.silence@gmail.com
[axboe: turn bitwise OR into logical variant]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch ensures that the clock notifier is unregistered
when driver probe is returning error.
Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Satish Nagireddy <satish.nagireddy@getcruise.com>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull a devfreq fix for 5.19-rc6 from Chanwoo Choi:
"- Fix exynos-bus NULL pointer dereference by correctly using the local
generated freq_table to output the debug values instead of using the
profile freq_table that is not used in the driver."
* tag 'devfreq-fixes-for-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: exynos-bus: Fix NULL pointer dereference
|
|
Fix exynos-bus NULL pointer dereference by correctly using the local
generated freq_table to output the debug values instead of using the
profile freq_table that is not used in the driver.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: b5d281f6c16d ("PM / devfreq: Rework freq_table to be local to devfreq struct")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"A fix for tinyconfig build error, a fix for section mismatch warning,
and two cleanups of obsolete code"
* tag 'loongarch-fixes-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Fix section mismatch warning
LoongArch: Fix build errors for tinyconfig
LoongArch: Remove obsolete mentions of vcsr
LoongArch: Drop these obsolete selects in Kconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter, can, and bluetooth.
Current release - regressions:
- bluetooth: fix deadlock on hci_power_on_sync
Previous releases - regressions:
- sched: act_police: allow 'continue' action offload
- eth: usbnet: fix memory leak in error case
- eth: ibmvnic: properly dispose of all skbs during a failover
Previous releases - always broken:
- bpf:
- fix insufficient bounds propagation from
adjust_scalar_min_max_vals
- clear page contiguity bit when unmapping pool
- netfilter: nft_set_pipapo: release elements in clone from
abort path
- mptcp: netlink: issue MP_PRIO signals from userspace PMs
- can:
- rcar_canfd: fix data transmission failed on R-Car V3U
- gs_usb: gs_usb_open/close(): fix memory leak
Misc:
- add Wenjia as SMC maintainer"
* tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
wireguard: Kconfig: select CRYPTO_CHACHA_S390
crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations
wireguard: selftests: use microvm on x86
wireguard: selftests: always call kernel makefile
wireguard: selftests: use virt machine on m68k
wireguard: selftests: set fake real time in init
r8169: fix accessing unset transport header
net: rose: fix UAF bug caused by rose_t0timer_expiry
usbnet: fix memory leak in error case
Revert "tls: rx: move counting TlsDecryptErrors for sync"
mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy
mptcp: fix local endpoint accounting
selftests: mptcp: userspace PM support for MP_PRIO signals
mptcp: netlink: issue MP_PRIO signals from userspace PMs
mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags
mptcp: Avoid acquiring PM lock for subflow priority changes
mptcp: fix locking in mptcp_nl_cmd_sf_destroy()
net/mlx5e: Fix matchall police parameters validation
net/sched: act_police: allow 'continue' action offload
net: lan966x: hardcode the number of external ports
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Tag Intel pin control as supported in MAINTAINERS
- Fix a NULL pointer exception in the Aspeed driver
- Correct some NAND functions in the Sunxi A83T driver
- Use the right offset for some Sunxi pins
- Fix a zero base offset in the Freescale (NXP) i.MX93
- Fix the IRQ support in the STM32 driver
* tag 'pinctrl-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: stm32: fix optional IRQ support to gpios
pinctrl: imx: Add the zero base flag for imx93
pinctrl: sunxi: sunxi_pconf_set: use correct offset
pinctrl: sunxi: a83t: Fix NAND function name for some pins
pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()
MAINTAINERS: Update Intel pin control to Supported
|
|
These are indeed "should not happen" situations, but it turns out recent
changes made the 'task_is_stopped_or_trace()' case trigger (fix for that
exists, is pending more testing), and the BUG_ON() makes it
unnecessarily hard to actually debug for no good reason.
It's been that way for a long time, but let's make it clear: BUG_ON() is
not good for debugging, and should never be used in situations where you
could just say "this shouldn't happen, but we can continue".
Use WARN_ON_ONCE() instead to make sure it gets logged, and then just
continue running. Instead of making the system basically unusuable
because you crashed the machine while potentially holding some very core
locks (eg this function is commonly called while holding 'tasklist_lock'
for writing).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On Tue, Jun 28, 2022 at 04:28:58PM +0800, Pengfei Xu wrote:
> # ./ftracetest
> === Ftrace unit tests ===
> [1] Basic trace file check [PASS]
> [2] Basic test for tracers [PASS]
> [3] Basic trace clock test [PASS]
> [4] Basic event tracing check [PASS]
> [5] Change the ringbuffer size [PASS]
> [6] Snapshot and tracing setting [PASS]
> [7] trace_pipe and trace_marker [PASS]
> [8] Test ftrace direct functions against tracers [UNRESOLVED]
> [9] Test ftrace direct functions against kprobes [UNRESOLVED]
> [10] Generic dynamic event - add/remove eprobe events [FAIL]
> [11] Generic dynamic event - add/remove kprobe events
>
> It 100% reproduced in step 11 and then missing ENDBR BUG generated:
> "
> [ 9332.752836] mmiotrace: enabled CPU7.
> [ 9332.788612] mmiotrace: disabled.
> [ 9337.103426] traps: Missing ENDBR: syscall_regfunc+0x0/0xb0
It turns out that while syscall_regfunc() does have an ENDBR when
generated, it gets sealed by objtool's .ibt_endbr_seal list.
Since the only text references to this function:
$ git grep syscall_regfunc
include/linux/tracepoint.h:extern int syscall_regfunc(void);
include/trace/events/syscalls.h: syscall_regfunc, syscall_unregfunc
include/trace/events/syscalls.h: syscall_regfunc, syscall_unregfunc
kernel/tracepoint.c:int syscall_regfunc(void)
appear in the __tracepoint section which is excluded by objtool.
Fixes: 3c6f9f77e618 ("objtool: Rework ibt and extricate from stack validation")
Reported-by: Pengfei Xu <pengfei.xu@intel.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Yrrepdaow4F5kqG0@hirez.programming.kicks-ass.net
|
|
Fix a kernel NULL pointer dereference reported by gpio kselftests.
linereq_free() can be called as part of the cleanup of a failed request,
at which time the desc for a line may not have been determined, so it
is unsafe to dereference without a check.
Add a check prior to dereferencing the line desc.
Fixes: 2068339a6c35 ("gpiolib: cdev: Add hardware timestamp clock type")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
init_numa_memory() is annotated __init and not used by any module,
thus don't export it.
Remove not needed EXPORT_SYMBOL for init_numa_memory() to fix the
following section mismatch warning:
MODPOST vmlinux.symvers
WARNING: modpost: vmlinux.o(___ksymtab+init_numa_memory+0x0): Section mismatch in reference
from the variable __ksymtab_init_numa_memory to the function .init.text:init_numa_memory()
The symbol init_numa_memory is exported and annotated __init
Fix this by removing the __init annotation of init_numa_memory or drop the export.
This is build on Linux 5.19-rc4.
Fixes: d4b6f1562a3c ("LoongArch: Add Non-Uniform Memory Access (NUMA) support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Building loongarch:tinyconfig fails with the following error.
./arch/loongarch/include/asm/page.h: In function 'pfn_valid':
./arch/loongarch/include/asm/page.h:42:32: error: 'PHYS_OFFSET' undeclared
Add the missing include file and fix succeeding vdso errors.
Fixes: 09cfefb7fa70 ("LoongArch: Add memory management")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The `vcsr` only exists in the old hardware design, it isn't used in any
shipped hardware from Loongson-3A5000 on. Both scalar FP and LSX/LASX
instructions use the `fcsr` as their control and status registers now.
For example, the RM control bit in fcsr0 is shared by FP, LSX and LASX
instructions.
Particularly, fcsr16 to fcsr31 are reserved for LSX/LASX now, access to
these registers has no visible effect if LSX/LASX is enabled, and will
cause SXD/ASXD exceptions if LSX/LASX is not enabled.
So, mentions of vcsr are obsolete in the first place (it was just used
for debugging), let's remove them.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Commit fa96b57c1490 ("LoongArch: Add build infrastructure") adds the new
file arch/loongarch/Kconfig.
As the work on LoongArch was probably quite some time under development,
various config symbols have changed and disappeared from the time of
initial writing of the Kconfig file and its inclusion in the repository.
The following four commits:
commit c126a53c2760 ("arch: remove GENERIC_FIND_FIRST_BIT entirely")
commit 140c8180eb7c ("arch: remove HAVE_COPY_THREAD_TLS")
commit aca52c398389 ("mm: remove CONFIG_HAVE_MEMBLOCK")
commit 3f08a302f533 ("mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option")
remove the mentioned config symbol, and enable the intended setup by
default without configuration.
Drop these obsolete selects in loongarch's Kconfig.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Use the fbcon_info_from_console() wrapper which was added to kernel
v5.19 with commit 409d6c95f9c6 ("fbcon: Introduce wrapper for console->fb_info lookup").
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Verify that the fbdev or drm driver correctly adjusted the virtual
screen sizes. On failure report the failing driver and reject the screen
size change.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
|
|
We need to prevent that users configure a screen size which is smaller than the
currently selected font size. Otherwise rendering chars on the screen will
access memory outside the graphics memory region.
This patch adds a new function fbcon_modechange_possible() which
implements this check and which later may be extended with other checks
if necessary. The new function is called from the FBIOPUT_VSCREENINFO
ioctl handler in fbmem.c, which will return -EINVAL if userspace asked
for a too small screen size.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
|
