aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-18usb: dwc3: omap: add basic suspend/resume supportFelipe Balbi
this patch implements basic suspend/resume functionality for the OMAP glue layer. Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: dwc3: omap: remove unused fields from private structureFelipe Balbi
we're not using those fields of the structure, might as well remove them. Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: dwc3: omap: introduce enable/disable IRQ methodsFelipe Balbi
they will be re-used on suspend/resume implementation. Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: dwc3: core: add power management supportFelipe Balbi
Add support for basic power management on the dwc3 driver. While there is still lots to improve for full PM support, this minimal patch will already make sure that we survive suspend-to-ram and suspend-to-disk without major issues. Cc: Vikas C Sajjan <vikas.sajjan@linaro.org> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: dwc3: gadget: save state of pullupsFelipe Balbi
This will be used during resume to verify if we should reconnect our pullups or not. Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: dwc3: gadget: introduce and use enable/disable irq methodsFelipe Balbi
we don't need to enable IRQs until we have a gadget driver loaded and ready to work, so let's delay IRQ enable to ->udc_start() and IRQ disable to ->udc_stop(). While at that, also move the related use of request_irq() and free_irq(). Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: dwc3: core: explicitly setup and cleanup event buffersFelipe Balbi
Make the call to dwc3_event_buffers_setup() and dwc3_event_buffers_cleanup() explicit, so it's easier to implement PM. Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: mv_udc_core: switch over to usb_gadget_map/unmap_request()Felipe Balbi
we have generic implementations for a reason, let's use them Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: lpc32xx_udc: switch over to usb_gadget_map/unmap_request()Felipe Balbi
we have generic implementations for a reason, let's use them Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: fusb300: switch over to usb_gadget_map/unmap_request()Felipe Balbi
we have generic implementations for a reason, let's use them Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: fsl_udc_core: switch over to usb_gadget_map/unmap_request()Felipe Balbi
we have generic implementations for a reason, let's use them Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: atmel_usba_udc: switch over to usb_gadget_map/unmap_request()Felipe Balbi
we have generic implementations for a reason, let's use them. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: amd5536udc: remove unused structure memberFelipe Balbi
that member isn't used anywhere in the driver and be removed with no mercy. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: s3c-hsotg: switch over to usb_gadget_map/unmap_request()Felipe Balbi
we have generic implementations for a reason, let's use them. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: drop now unnecessary flagFelipe Balbi
We don't need the ->register_my_device flag anymore because all UDC drivers have been properly converted. Let's remove every history of it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: chipidea: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: pxa27x_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: pxa25x_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: renesas_usbhs: gadget: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: s3c2410_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: s3c-hsudc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: s3c-hsotg: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: r8a66597-udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: pch_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: net2280: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: net2272: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: mv_udc_core: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: mv_u3d_core: fix a compile warningFelipe Balbi
Fix the following compile warning: mv_u3d_core.c:1766:12: warning: 'mv_u3d_remove' \ defined but not used [-Wunused-function] Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: mv_u3d_core: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: m66592-udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: lpc32xx_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: imx_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: goku_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: fusb300_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: fsl_udc_core: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: fsl_qe_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: dummy_hcd: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: bcm63xx_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: atmel_usba_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: at91_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we can remove some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: amd5536udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: omap_udc: let udc-core manage gadget->devFelipe Balbi
By simply setting a flag, we drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: musb: gadget: let udc-core manage gadget-devFelipe Balbi
By simply setting a flag, we can delete a little boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: dwc3: gadget: let udc-core manage gadget->devFelipe Balbi
We don't need to register that device ourselves if we simply set gadget->register_my_device. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: udc-core: allow udc class register gadget deviceFelipe Balbi
Currently all UDC drivers are calling device_register() before calling usb_add_gadget_udc(). In order to avoid code duplication, we can allow udc-core.c register that device. However that would become a really large patch, so to cope with the meanwhile and allow us to write bite-sized patches, we're adding a flag which will be set by UDC driver once it removes the code for registering the gadget device. Once all are converted, the new flag will be removed. Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: dwc3: omap: stop using nop-usb-xceivKishon Vijay Abraham I
Now that we have drivers for omap-usb2 phy and omap-usb3 phy, stop using nop-usb-xceiv. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: dwc3: omap: remove platform data associated with dwc3-omapKishon Vijay Abraham I
omap5 is not going to have support for non-dt boot making the platform data associated with dwc3 useless. Removed it here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: dwc3: omap: minor fixes to get dt workingKishon Vijay Abraham I
Includes few minor fixes in dwc3-omap like populating the compatible string in a correct way, extracting the utmi-mode property properly and changing the index of get_irq since irq of core is removed from hwmod entry. Also updated the documentation with dwc3-omap device tree binding information. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> [ balbi@ti.com : fix a compile warning introduced by this commit ] Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18USB: phy: nop: Defer probe if device needs VCC/RESETRoger Quadros
Add 2 flags, needs_vcc and needs_reset to platform data. If the flag is set and the regulator couldn't be found then we bail out with -EPROBE_DEFER. For device tree boot we depend on presensce of vcc-supply/ reset-supply properties to decide if we should bail out with -EPROBE_DEFER or just continue in case the regulator can't be found. This is required for proper functionality in cases where the regulator is needed but is probed later than the PHY device. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: phy: nop: Add device tree support and binding informationRoger Quadros
The PHY clock, clock rate, VCC regulator and RESET regulator can now be provided via device tree. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 20:57:49 +0000