aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-05drm/i915: Ensure eDP powered up during DP_SET_POWER operation in dp_prepareKeith Packard
Any call to intel_dp_sink_dpms must ensure that the panel has power so that the DP_SET_POWER operation will be correctly received. The only one missing this was in intel_dp_prepare. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-10-05drm/i915: Enable eDP panel power during I2C initialization sequenceKeith Packard
The DP i2c initialization code does a couple of i2c transactions, which means that an eDP panel must be powered up. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-10-05drm/i915: Wrap DP EDID fetch functions to enable eDP panel powerKeith Packard
Talking to the eDP DDC channel requires that the panel be powered up. Wrap both the EDID and modes fetch code with calls to turn the vdd power on and back off. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-10-05drm/i915: Delay DP i2c initialization until panel power timings are computedKeith Packard
On eDP, DDC requires panel power, but turning that on uses the panel power sequencing timing values fetch from the DPCD data. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-10-05drm/i915: Ensure panel is on during DPMS offKeith Packard
If the panel is already off, we'll need to turn VDD on to execute the (useless) DPMS off code. Yes, it would be better to just not do any of this, but correctness, and *then* performance. Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-30drm/i915: Turn force VDD back off when panel running in intel_dp_dpmsKeith Packard
The VDD force bit is turned on before touching the panel, but if it was enabled, there was no call to turn it back off. Add a call. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-09-30drm/i915: Check for eDP inside edp panel on/off funcsKeith Packard
Cleans up code dealing with eDP a bit. Remove redundant checks in callers Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-30drm/i915: Unlock PCH_PP_CONTROL alwaysKeith Packard
Avoid any question about locked registers by just writing the unlock pattern with every write to the register. Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-30drm/i915: Check eDP power when doing aux channel communicationsKeith Packard
Verify that the eDP VDD is on, either with the panel being on or with the VDD force-on bit being set. This demonstrates that in many instances, VDD is not on when needed, which leads to failed EDID communications. Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-30drm/i915: Only use VBT panel mode on eDP if no EDID is foundKeith Packard
We're going to assume that EDID is more reliable than the VBT tables for eDP panels, which is notably true on MacBook machines where the VBT contains completely bogus data. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-09-30drm/i915: Shut down PCH interrupts during irq_uninstallKeith Packard
This masks out all interrupts and ack's any pending ones at IRQ uninstall time to make sure we don't receive any unexpected interrupts later on. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-09-30drm/i915: Enable digital port hotplug on PCH systemsKeith Packard
We were relying on the BIOS to set these bits, which doesn't always happen. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-09-21drm/i915: FBC off for ironlake and older, otherwise on by defaultKeith Packard
Make the default FBC behaviour chipset specific, allowing us to turn it on by default for Ironlake and older where it has been seen to cause trouble with screen updates. Signed-off-by: Keith Packard <keithp@keithp.com> Tested-by: Francis Moreau <francis.moro@gmail.com>
2011-09-21drm/i915: Enable SDVO hotplug interrupts for HDMI and DVISimon Farnsworth
I was seeing a nasty 5 frame glitch every 10 seconds, caused by the poll for connection on DVI attached by SDVO. As my SDVO DVI supports hotplug detect interrupts, the fix is to enable them, and hook them in to the various bits of driver infrastructure so that they work reliably. Note that this is only tested on single-function DVI-D SDVOs, on two platforms (965GME and 945GSE), and has not been checked against a specification document. With lots of help from Adam Jackson <ajax@redhat.com> on IRC. Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-19drm/i915: Enable dither whenever display bpc < frame buffer bpcKeith Packard
We want to enable dithering on any pipe where the frame buffer has more color resolution than the output device. The previous code was incorrectly clamping the frame buffer bpc to the display bpc, effectively disabling dithering all of the time as the computed frame buffer bpc would never be larger than the display bpc. Signed-off-by: Keith Packard <keithp@keithp.com> Reported-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
2011-09-12Linux 3.1-rc6Linus Torvalds
2011-09-12Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Remove duplicate "return" statement drm/nv04/crtc: Bail out if FB is not bound to crtc drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate drm/nouveau: fix oops on pre-semaphore hardware drm/nv50/crtc: Bail out if FB is not bound to crtc drm/radeon/kms: fix DP detect and EDID fetch for DP bridges
2011-09-12Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc: ARM: CSR: add missing sentinels to of_device_id tables ARM: cns3xxx: Fix newly introduced warnings in the PCIe code ARM: cns3xxx: Fix compile error caused by hardware.h removed ARM: davinci: fix cache flush build error ARM: davinci: correct MDSTAT_STATE_MASK ARM: davinci: da850 EVM: read mac address from SPI flash OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[] OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain OMAP4: clock: fix compile warning OMAP4: clock: re-enable previous clockdomain enable/disable sequence OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup OMAP: powerdomains: Make all powerdomain target states as ON at init
2011-09-12ioctl: register LTTng ioctlMathieu Desnoyers
The LTTng 2.0 kernel tracer (stand-alone module package, available at http://lttng.org) uses the 0xF6 ioctl range for tracer control and transport operations. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-12Merge branch 'for-linus' of git://github.com/chrismason/linuxLinus Torvalds
* 'for-linus' of git://github.com/chrismason/linux: Btrfs: add dummy extent if dst offset excceeds file end in Btrfs: calc file extent num_bytes correctly in file clone btrfs: xattr: fix attribute removal Btrfs: fix wrong nbytes information of the inode Btrfs: fix the file extent gap when doing direct IO Btrfs: fix unclosed transaction handle in btrfs_cont_expand Btrfs: fix misuse of trans block rsv Btrfs: reset to appropriate block rsv after orphan operations Btrfs: skip locking if searching the commit root in csum lookup btrfs: fix warning in iput for bad-inode Btrfs: fix an oops when deleting snapshots
2011-09-12fuse: fix memory leakMiklos Szeredi
kmemleak is reporting that 32 bytes are being leaked by FUSE: unreferenced object 0xe373b270 (size 32): comm "fusermount", pid 1207, jiffies 4294707026 (age 2675.187s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<b05517d7>] kmemleak_alloc+0x27/0x50 [<b0196435>] kmem_cache_alloc+0xc5/0x180 [<b02455be>] fuse_alloc_forget+0x1e/0x20 [<b0245670>] fuse_alloc_inode+0xb0/0xd0 [<b01b1a8c>] alloc_inode+0x1c/0x80 [<b01b290f>] iget5_locked+0x8f/0x1a0 [<b0246022>] fuse_iget+0x72/0x1a0 [<b02461da>] fuse_get_root_inode+0x8a/0x90 [<b02465cf>] fuse_fill_super+0x3ef/0x590 [<b019e56f>] mount_nodev+0x3f/0x90 [<b0244e95>] fuse_mount+0x15/0x20 [<b019d1bc>] mount_fs+0x1c/0xc0 [<b01b5811>] vfs_kern_mount+0x41/0x90 [<b01b5af9>] do_kern_mount+0x39/0xd0 [<b01b7585>] do_mount+0x2e5/0x660 [<b01b7966>] sys_mount+0x66/0xa0 This leak report is consistent and happens once per boot on 3.1.0-rc5-dirty. This happens if a FORGET request is queued after the fuse device was released. Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-12fuse: fix flock breakageMiklos Szeredi
Commit 37fb3a30b4 ("fuse: fix flock") added in 3.1-rc4 caused flock() to fail with ENOSYS with the kernel ABI version 7.16 or earlier. Fix by falling back to testing FUSE_POSIX_LOCKS for ABI versions 7.16 and earlier. Reported-by: Martin Ziegler <ziegler@email.mathematik.uni-freiburg.de> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Martin Ziegler <ziegler@email.mathematik.uni-freiburg.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-12Merge branch 'for_3.1/pm-fixes-2' of ↵Arnd Bergmann
git://gitorious.org/khilman/linux-omap-pm into fixes
2011-09-12Merge branch 'sirf/fixes' into fixesArnd Bergmann
2011-09-11Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linusLinus Torvalds
* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus: [media] vp7045: fix buffer setup [media] nuvoton-cir: simplify raw IR sample handling [media] [Resend] viacam: Don't explode if pci_find_bus() returns NULL [media] v4l2: Fix documentation of the codec device controls [media] gspca - sonixj: Fix the darkness of sensor om6802 in 320x240 [media] gspca - sonixj: Fix wrong register mask for sensor om6802 [media] gspca - ov519: Fix LED inversion of some ov519 webcams [media] pwc: precedence bug in pwc_init_controls()
2011-09-11Merge branch 'for-linus' of git://openrisc.net/~jonas/linuxLinus Torvalds
* 'for-linus' of git://openrisc.net/~jonas/linux: Add missing DMA ops openrisc: don't use pt_regs in struct sigcontext
2011-09-11Btrfs: add dummy extent if dst offset excceeds file end inLi Zefan
You can see there's no file extent with range [0, 4096]. Check this by btrfsck: # btrfsck /dev/sda7 root 5 inode 258 errors 100 ... Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: calc file extent num_bytes correctly in file cloneLi Zefan
num_bytes should be 4096 not 12288. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11btrfs: xattr: fix attribute removalDavid Sterba
An attribute is not removed by 'setfattr -x attr file' and remains visible in attr list. This makes xfstests/062 pass again. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: fix wrong nbytes information of the inodeMiao Xie
If we write some data into the data hole of the file(no preallocation for this hole), Btrfs will allocate some disk space, and update nbytes of the inode, but the other element--disk_i_size needn't be updated. At this condition, we must update inode metadata though disk_i_size is not changed(btrfs_ordered_update_i_size() return 1). # mkfs.btrfs /dev/sdb1 # mount /dev/sdb1 /mnt # touch /mnt/a # truncate -s 856002 /mnt/a # dd if=/dev/zero of=/mnt/a bs=4K count=1 conv=nocreat,notrunc # umount /mnt # btrfsck /dev/sdb1 root 5 inode 257 errors 400 found 32768 bytes used err is 1 Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: fix the file extent gap when doing direct IOMiao Xie
When we write some data to the place that is beyond the end of the file in direct I/O mode, a data hole will be created. And Btrfs should insert a file extent item that point to this hole into the fs tree. But unfortunately Btrfs forgets doing it. The following is a simple way to reproduce it: # mkfs.btrfs /dev/sdc2 # mount /dev/sdc2 /test4 # touch /test4/a # dd if=/dev/zero of=/test4/a seek=8 count=1 bs=4K oflag=direct conv=nocreat,notrunc # umount /test4 # btrfsck /dev/sdc2 root 5 inode 257 errors 100 Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: fix unclosed transaction handle in btrfs_cont_expandMiao Xie
The function - btrfs_cont_expand() forgot to close the transaction handle before it jump out the while loop. Fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: fix misuse of trans block rsvLiu Bo
At the beginning of create_pending_snapshot, trans->block_rsv is set to pending->block_rsv and is used for snapshot things, however, when it is done, we do not recover it as will. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: reset to appropriate block rsv after orphan operationsLiu Bo
While truncating free space cache, we forget to change trans->block_rsv back to the original one, but leave it with the orphan_block_rsv, and then with option inode_cache enable, it leads to countless warnings of btrfs_alloc_free_block and btrfs_orphan_commit_root: WARNING: at fs/btrfs/extent-tree.c:5711 btrfs_alloc_free_block+0x180/0x350 [btrfs]() ... WARNING: at fs/btrfs/inode.c:2193 btrfs_orphan_commit_root+0xb0/0xc0 [btrfs]() Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: skip locking if searching the commit root in csum lookupJosef Bacik
It's not enough to just search the commit root, since we could be cow'ing the very block we need to search through, which would mean that its locked and we'll still deadlock. So use path->skip_locking as well. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11btrfs: fix warning in iput for bad-inodeSergei Trofimovich
iput() shouldn't be called for inodes in I_NEW state. We need to mark inode as constructed first. WARNING: at fs/inode.c:1309 iput+0x20b/0x210() Call Trace: [<ffffffff8103e7ba>] warn_slowpath_common+0x7a/0xb0 [<ffffffff8103e805>] warn_slowpath_null+0x15/0x20 [<ffffffff810eaf0b>] iput+0x20b/0x210 [<ffffffff811b96fb>] btrfs_iget+0x1eb/0x4a0 [<ffffffff811c3ad6>] btrfs_run_defrag_inodes+0x136/0x210 [<ffffffff811ad55f>] cleaner_kthread+0x17f/0x1a0 [<ffffffff81035b7d>] ? sub_preempt_count+0x9d/0xd0 [<ffffffff811ad3e0>] ? transaction_kthread+0x280/0x280 [<ffffffff8105af86>] kthread+0x96/0xa0 [<ffffffff814336d4>] kernel_thread_helper+0x4/0x10 [<ffffffff8105aef0>] ? kthread_worker_fn+0x190/0x190 [<ffffffff814336d0>] ? gs_change+0xb/0xb Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> CC: Konstantin Khlebnikov <khlebnikov@openvz.org> Tested-by: David Sterba <dsterba@suse.cz> CC: Josef Bacik <josef@redhat.com> CC: Chris Mason <chris.mason@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: fix an oops when deleting snapshotsLiu Bo
We can reproduce this oops via the following steps: $ mkfs.btrfs /dev/sdb7 $ mount /dev/sdb7 /mnt/btrfs $ for ((i=0; i<3; i++)); do btrfs sub snap /mnt/btrfs /mnt/btrfs/s_$i; done $ rm -fr /mnt/btrfs/* $ rm -fr /mnt/btrfs/* then we'll get ------------[ cut here ]------------ kernel BUG at fs/btrfs/inode.c:2264! [...] Call Trace: [<ffffffffa05578c7>] btrfs_rmdir+0xf7/0x1b0 [btrfs] [<ffffffff81150b95>] vfs_rmdir+0xa5/0xf0 [<ffffffff81153cc3>] do_rmdir+0x123/0x140 [<ffffffff81145ac7>] ? fput+0x197/0x260 [<ffffffff810aecff>] ? audit_syscall_entry+0x1bf/0x1f0 [<ffffffff81153d0d>] sys_unlinkat+0x2d/0x40 [<ffffffff8147896b>] system_call_fastpath+0x16/0x1b RIP [<ffffffffa054f7b9>] btrfs_orphan_add+0x179/0x1a0 [btrfs] When it comes to btrfs_lookup_dentry, we may set a snapshot's inode->i_ino to BTRFS_EMPTY_SUBVOL_DIR_OBJECTID instead of BTRFS_FIRST_FREE_OBJECTID, while the snapshot's location.objectid remains unchanged. However, btrfs_ino() does not take this into account, and returns a wrong ino, and causes the oops. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11[media] vp7045: fix buffer setupFlorian Mickler
dvb_usb_device_init calls the frontend_attach method of this driver which uses vp7045_usb_ob. In order to have a buffer ready in vp7045_usb_op, it has to be allocated before that happens. Luckily we can use the whole private data as the buffer as it gets separately allocated on the heap via kzalloc in dvb_usb_device_init and is thus apt for use via usb_control_msg. This fixes a BUG: unable to handle kernel paging request at 0000000000001e78 reported by Tino Keitel and diagnosed by Dan Carpenter. Cc: stable@kernel.org # For v3.0 and upper Tested-by: Tino Keitel <tino.keitel@tikei.de> Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-11[media] nuvoton-cir: simplify raw IR sample handlingJarod Wilson
The nuvoton-cir driver was storing up consecutive pulse-pulse and space-space samples internally, for no good reason, since ir_raw_event_store_with_filter() already merges back to back like samples types for us. This should also fix a regression introduced late in 3.0 that related to a timeout change, which actually becomes correct when coupled with this change. Tested with RC6 and RC5 on my own nuvoton-cir hardware atop vanilla 3.0.0, after verifying quirky behavior in 3.0 due to the timeout change. Reported-by: Stephan Raue <sraue@openelec.tv> CC: Stephan Raue <sraue@openelec.tv> CC: stable@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-11[media] [Resend] viacam: Don't explode if pci_find_bus() returns NULLJesper Juhl
In the unlikely case that pci_find_bus() should return NULL viacam_serial_is_enabled() is going to dereference a NULL pointer and blow up. Better safe than sorry, so be defensive and check the pointer. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-11[media] v4l2: Fix documentation of the codec device controlsKamil Debski
Fixed missing ids of the codec controls description in the controls.xml file. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-11[media] gspca - sonixj: Fix the darkness of sensor om6802 in 320x240Jean-François Moine
The images are clearer with a lower bridge clock. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-11[media] gspca - sonixj: Fix wrong register mask for sensor om6802Luiz Carlos Ramos
The bug was introduced by git commit 0e4d413af1a9d, giving very dark images. Signed-off-by: Luiz Carlos Ramos <lramos.prof@yahoo.com.br> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-11[media] gspca - ov519: Fix LED inversion of some ov519 webcamsJean-François Moine
The list of the webcams which have LED inversion was rebuild scanning ms-win .inf files. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-11[media] pwc: precedence bug in pwc_init_controls()Dan Carpenter
'!' has higher precedence than '&' so we need parenthesis here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-11Add missing DMA opsJonas Bonn
For the initial architecture submission, not all of the DMA ops were implemented. This patch adds the *map_page and *map_sg variants of the DMA mapping ops. This patch is currently of interest mainly to some drivers that haven't been submitted upstream yet. Signed-off-by: Jonas Bonn <jonas@southpole.se>
2011-09-11ARM: CSR: add missing sentinels to of_device_id tablesJamie Iles
The of_device_id tables used for matching should be terminated with empty sentinel values. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Barry Song <baohua.song@csr.com>
2011-09-10scsi: qla4xxx driver depends on NETRandy Dunlap
When CONFIG_NET is disabled, SCSI_QLA_ISCSI selects SCSI_ISCSI_ATTRS, which uses network interfaces, so the build fails with multiple errors: warning: (ISCSI_TCP && SCSI_CXGB3_ISCSI && SCSI_CXGB4_ISCSI && SCSI_QLA_ISCSI && INFINIBAND_ISER) selects SCSI_ISCSI_ATTRS which has unmet direct dependencies (SCSI && NET) ERROR: "skb_trim" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "netlink_kernel_create" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "netlink_kernel_release" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ... so make SCSI_QLA_ISCSI also depend on NET to prevent the build errors. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Ravi Anand <ravi.anand@qlogic.com> Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Cc: iscsi-driver@qlogic.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-10Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7088/1: entry: fix wrong parameter name used in do_thumb_abort ARM: 7080/1: l2x0: make sure I&D are not locked down on init ARM: 7081/1: mach-integrator: fix the clocksource NET: am79c961: fix race in link status code ARM: 7067/1: mm: keep significant bits in pfn_valid
2011-09-10ARM: 7088/1: entry: fix wrong parameter name used in do_thumb_abortJanusz Krzysztofik
Commit be020f8618ca, "ARM: entry: abort-macro: specify registers to be used for macros", while replacing register numbers with macro parameter names, mismatched the name used for r1. For me, this resulted in user space built for EABI with -march=armv4t -mtune=arm920t -mthumb-interwork -mthumb broken on my OMAP1510 based Amstrad Delta (old ABI and no thumb still worked for me though). Fix this by using correct parameter name fsr instead of mismatched psr, used by callers for another purpose. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 12:50:35 +0000