aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-29net/mlx5e: Check for BlueFlame capability before allocating SQ uarGal Pressman
Previous to this patch mapping was always set to write combining without checking whether BlueFlame is supported in the device. Fixes: 0ba422410bbf ('net/mlx5: Fix global UAR mapping') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5e: Change enum to better reflect usageEli Cohen
Change MLX5E_STATE_ASYNC_EVENTS_ENABLE to MLX5E_STATE_ASYNC_EVENTS_ENABLED since it represent a state and not an operation. Fixes: acff797cd1874 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5: Add ConnectX-5 PCIe 4.0 to list of supported devicesMajd Dibbiny
Add the upcoming ConnectX-5 PCIe 4.0 device to the list of supported devices by the mlx5 driver. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5: Update command stringsEli Cohen
Add command string for MODIFY_FLOW_TABLE which is used by the driver. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net: marvell: Add separate config ANEG function for Marvell 88E1111Harini Katakam
Marvell 88E1111 currently uses the generic marvell config ANEG function. This function has a sequence accessing Page 5 and Register 31, both of which are not defined or reserved for this PHY. Hence this patch adds a new config ANEG function for Marvell 88E1111 without these erroneous accesses. Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29Merge branch 'batman-adv-fixes'David S. Miller
Sven Eckelmann says: ==================== batman-adv: Fixes for Linux 4.7 Antonio currently seems to be occupied. This is currently rather unfortunate because there are patches waiting in the batman-adv development repository maint(enance) branch [1] since up to 6 weeks. I am now getting asked when these patches will hit the distribution kernels and therefore decided to submit these patches directly to netdev. The patch from Simon works around the problem that warnings could be triggered in the translation table code via packets using a VLAN not configured on the target host. This warning was replaced with a rate limited info message. Ben Hutchings found an superfluous batadv_softif_vlan_put in the error handling code of the translation table while he backported the "batman-adv: Fix reference counting of vlan object for tt_local_entry" patch to the stable kernels. He noticed correctly that this batadv_softif_vlan_put should also have been removed by the said patch. The most requested fix at the moment is related to a double free in the translation table code. It is a race condition which mostly happens on systems with multiple cores and multiple network interface attached to batman-adv. Two Freifunk communities which were haunted by weird crashes (with backtraces reporting problems in other parts of the kernel) were kind enough to test this patch. They reported that there systems are now running stable after applying this patch. An invalid memory access was detected in the batadv_icmp_packet_rr handling code when receiving a skbuff with fragments. The last patch is fixing a memory leak when the interface is removed via .dellink. The code to fix it was copied from the code handling the legacy sysfs interface to remove netdevices from a batman-adv netdevice. There are still 28 patches in the development tree for v4.8 but I will leave them to Antonio because these are cleanups and features and therefore for net- next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29batman-adv: Clean up untagged vlan when destroying via rtnl-linkSven Eckelmann
The untagged vlan object is only destroyed when the interface is removed via the legacy sysfs interface. But it also has to be destroyed when the standard rtnl-link interface is used. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29batman-adv: Fix ICMP RR ethernet access after skb_linearizeSven Eckelmann
The skb_linearize may reallocate the skb. This makes the calculated pointer for ethhdr invalid. But it the pointer is used later to fill in the RR field of the batadv_icmp_packet_rr packet. Instead re-evaluate eth_hdr after the skb_linearize+skb_cow to fix the pointer and avoid the invalid read. Fixes: da6b8c20a5b8 ("batman-adv: generalize batman-adv icmp packet handling") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29batman-adv: Fix double-put of vlan objectBen Hutchings
Each batadv_tt_local_entry hold a single reference to a batadv_softif_vlan. In case a new entry cannot be added to the hash table, the error path puts the reference, but the reference will also now be dropped by batadv_tt_local_entry_release(). Fixes: a33d970d0b54 ("batman-adv: Fix reference counting of vlan object for tt_local_entry") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29batman-adv: Fix use-after-free/double-free of tt_req_nodeSven Eckelmann
The tt_req_node is added and removed from a list inside a spinlock. But the locking is sometimes removed even when the object is still referenced and will be used later via this reference. For example batadv_send_tt_request can create a new tt_req_node (including add to a list) and later re-acquires the lock to remove it from the list and to free it. But at this time another context could have already removed this tt_req_node from the list and freed it. CPU#0 batadv_batman_skb_recv from net_device 0 -> batadv_iv_ogm_receive -> batadv_iv_ogm_process -> batadv_iv_ogm_process_per_outif -> batadv_tvlv_ogm_receive -> batadv_tvlv_ogm_receive -> batadv_tvlv_containers_process -> batadv_tvlv_call_handler -> batadv_tt_tvlv_ogm_handler_v1 -> batadv_tt_update_orig -> batadv_send_tt_request -> batadv_tt_req_node_new spin_lock(...) allocates new tt_req_node and adds it to list spin_unlock(...) return tt_req_node CPU#1 batadv_batman_skb_recv from net_device 1 -> batadv_recv_unicast_tvlv -> batadv_tvlv_containers_process -> batadv_tvlv_call_handler -> batadv_tt_tvlv_unicast_handler_v1 -> batadv_handle_tt_response spin_lock(...) tt_req_node gets removed from list and is freed spin_unlock(...) CPU#0 <- returned to batadv_send_tt_request spin_lock(...) tt_req_node gets removed from list and is freed MEMORY CORRUPTION/SEGFAULT/... spin_unlock(...) This can only be solved via reference counting to allow multiple contexts to handle the list manipulation while making sure that only the last context holding a reference will free the object. Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann <sven@narfation.org> Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net> Tested-by: Amadeus Alfa <amadeus@chemnitz.freifunk.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29batman-adv: replace WARN with rate limited output on non-existing VLANSimon Wunderlich
If a VLAN tagged frame is received and the corresponding VLAN is not configured on the soft interface, it will splat a WARN on every packet received. This is a quite annoying behaviour for some scenarios, e.g. if bat0 is bridged with eth0, and there are arbitrary VLAN tagged frames from Ethernet coming in without having any VLAN configuration on bat0. The code should probably create vlan objects on the fly and transparently transport these VLAN-tagged Ethernet frames, but until this is done, at least the WARN splat should be replaced by a rate limited output. Fixes: 354136bcc3c4 ("batman-adv: fix kernel crash due to missing NULL checks") Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net: phy: Manage fixed PHY address space using IDAFlorian Fainelli
If we have a system which uses fixed PHY devices and calls fixed_phy_register() then fixed_phy_unregister() we can exhaust the number of fixed PHYs available after a while, since we keep incrementing the variable phy_fixed_addr, but we never decrement it. This patch fixes that by converting the fixed PHY allocation to using IDA, which takes care of the allocation/dealloaction of the PHY addresses for us. Fixes: a75951217472 ("net: phy: extend fixed driver with fixed_phy_register()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28sock_diag: do not broadcast raw socket destructionWillem de Bruijn
Diag intends to broadcast tcp_sk and udp_sk socket destruction. Testing sk->sk_protocol for IPPROTO_TCP/IPPROTO_UDP alone is not sufficient for this. Raw sockets can have the same type. Add a test for sk->sk_type. Fixes: eb4cb008529c ("sock_diag: define destruction multicast groups") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28connector: fix out-of-order cn_proc netlink message deliveryAaron Campbell
The proc connector messages include a sequence number, allowing userspace programs to detect lost messages. However, performing this detection is currently more difficult than necessary, since netlink messages can be delivered to the application out-of-order. To fix this, leave pre-emption disabled during cn_netlink_send(), and use GFP_NOWAIT. The following was written as a test case. Building the kernel w/ make -j32 proved a reliable way to generate out-of-order cn_proc messages. int main(int argc, char *argv[]) { static uint32_t last_seq[CPU_SETSIZE], seq; int cpu, fd; struct sockaddr_nl sa; struct __attribute__((aligned(NLMSG_ALIGNTO))) { struct nlmsghdr nl_hdr; struct __attribute__((__packed__)) { struct cn_msg cn_msg; struct proc_event cn_proc; }; } rmsg; struct __attribute__((aligned(NLMSG_ALIGNTO))) { struct nlmsghdr nl_hdr; struct __attribute__((__packed__)) { struct cn_msg cn_msg; enum proc_cn_mcast_op cn_mcast; }; } smsg; fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); if (fd < 0) { perror("socket"); } sa.nl_family = AF_NETLINK; sa.nl_groups = CN_IDX_PROC; sa.nl_pid = getpid(); if (bind(fd, (struct sockaddr *)&sa, sizeof(sa)) < 0) { perror("bind"); } memset(&smsg, 0, sizeof(smsg)); smsg.nl_hdr.nlmsg_len = sizeof(smsg); smsg.nl_hdr.nlmsg_pid = getpid(); smsg.nl_hdr.nlmsg_type = NLMSG_DONE; smsg.cn_msg.id.idx = CN_IDX_PROC; smsg.cn_msg.id.val = CN_VAL_PROC; smsg.cn_msg.len = sizeof(enum proc_cn_mcast_op); smsg.cn_mcast = PROC_CN_MCAST_LISTEN; if (send(fd, &smsg, sizeof(smsg), 0) != sizeof(smsg)) { perror("send"); } while (recv(fd, &rmsg, sizeof(rmsg), 0) == sizeof(rmsg)) { cpu = rmsg.cn_proc.cpu; if (cpu < 0) { continue; } seq = rmsg.cn_msg.seq; if ((last_seq[cpu] != 0) && (seq != last_seq[cpu] + 1)) { printf("out-of-order seq=%d on cpu=%d\n", seq, cpu); } last_seq[cpu] = seq; } /* NOTREACHED */ perror("recv"); return -1; } Signed-off-by: Aaron Campbell <aaron@monkey.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28Bridge: Fix ipv6 mc snooping if bridge has no ipv6 addressdaniel
The bridge is falsly dropping ipv6 mulitcast packets if there is: 1. No ipv6 address assigned on the brigde. 2. No external mld querier present. 3. The internal querier enabled. When the bridge fails to build mld queries, because it has no ipv6 address, it slilently returns, but keeps the local querier enabled. This specific case causes confusing packet loss. Ipv6 multicast snooping can only work if: a) An external querier is present OR b) The bridge has an ipv6 address an is capable of sending own queries Otherwise it has to forward/flood the ipv6 multicast traffic, because snooping cannot work. This patch fixes the issue by adding a flag to the bridge struct that indicates that there is currently no ipv6 address assinged to the bridge and returns a false state for the local querier in __br_multicast_querier_exists(). Special thanks to Linus Lüssing. Fixes: d1d81d4c3dd8 ("bridge: check return value of ipv6_dev_get_saddr()") Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> Acked-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net/mlx5: use mlx5_buf_alloc_node instead of mlx5_buf_alloc in mlx5_wq_ll_createWang Sheng-Hui
Commit 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") introduced mlx5_*_alloc_node() but missed changing some calling and warn messages. This patch introduces 2 changes: * Use mlx5_buf_alloc_node() instead of mlx5_buf_alloc() in mlx5_wq_ll_create() * Update the failure warn messages with _node postfix for mlx5_*_alloc function names Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com> Acked-By: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28Merge branch 'bgmac-fixes'David S. Miller
Florian Fainelli says: ==================== net: bgmac: Random fixes This patch series fixes a few issues spotted by code inspection and actual testing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: bgmac: Remove superflous netif_carrier_on()Florian Fainelli
bgmac_open() calls phy_start() to initialize the PHY state machine, which will set the interface's carrier state accordingly, no need to force that as this could be conflicting with the PHY state determined by PHYLIB. Fixes: dd4544f05469 ("bgmac: driver for GBit MAC core on BCMA bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: bgmac: Start transmit queue in bgmac_openFlorian Fainelli
The driver does not start the transmit queue in bgmac_open(). If the queue was stopped prior to closing then re-opening the interface, we would never be able to wake-up again. Fixes: dd4544f05469 ("bgmac: driver for GBit MAC core on BCMA bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: bgmac: Fix SOF bit checkingFlorian Fainelli
We are checking for the Start of Frame bit in the ctl1 word, while this bit is set in the ctl0 word instead. Read the ctl0 word and update the check to verify that. Fixes: 9cde94506eac ("bgmac: implement scatter/gather support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28bonding: fix 802.3ad aggregator reselectionJay Vosburgh
Since commit 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated."), the logic in bonding to handle selection between multiple aggregators has not functioned. This affects only configurations wherein the bonding slaves connect to two discrete aggregators (e.g., two independent switches, each with LACP enabled), thus creating two separate aggregation groups within a single bond. The cause is a change in 7bb11dc9f59d to no longer set AD_PORT_BEGIN on a port after a link state change, which would cause the port to be reselected for attachment to an aggregator as if were newly added to the bond. We cannot restore the prior behavior, as it contradicts IEEE 802.1AX 5.4.12, which requires ports that "become inoperable" (lose carrier, setting port_enabled=false as per 802.1AX 5.4.7) to remain selected (i.e., assigned to the aggregator). As the port now remains selected, the aggregator selection logic is not invoked. A side effect of this change is that aggregators in bonding will now contain ports that are link down. The aggregator selection logic does not currently handle this situation correctly, causing incorrect aggregator selection. This patch makes two changes to repair the aggregator selection logic in bonding to function as documented and within the confines of the standard: First, the aggregator selection and related logic now utilizes the number of active ports per aggregator, not the number of selected ports (as some selected ports may be down). The ad_select "bandwidth" and "count" options only consider ports that are link up. Second, on any carrier state change of any slave, the aggregator selection logic is explicitly called to insure the correct aggregator is active. Reported-by: Veli-Matti Lintu <veli-matti.lintu@opinsys.fi> Fixes: 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated.") Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28ipmr/ip6mr: Initialize the last assert time of mfc entries.Tom Goff
This fixes wrong-interface signaling on 32-bit platforms for entries created when jiffies > 2^31 + MFC_ASSERT_THRESH. Signed-off-by: Tom Goff <thomas.goff@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27vsock: make listener child lock ordering explicitStefan Hajnoczi
There are several places where the listener and pending or accept queue child sockets are accessed at the same time. Lockdep is unhappy that two locks from the same class are held. Tell lockdep that it is safe and document the lock ordering. Originally Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> sent a similar patch asking whether this is safe. I have audited the code and also covered the vsock_pending_work() function. Suggested-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27ipv6: enforce egress device match in per table nexthop lookupsPaolo Abeni
with the commit 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups"), net hop lookup is first performed on route creation in the passed-in table. However device match is not enforced in table lookup, so the found route can be later discarded due to egress device mismatch and no global lookup will be performed. This cause the following to fail: ip link add dummy1 type dummy ip link add dummy2 type dummy ip link set dummy1 up ip link set dummy2 up ip route add 2001:db8:8086::/48 dev dummy1 metric 20 ip route add 2001:db8:d34d::/64 via 2001:db8:8086::2 dev dummy1 metric 20 ip route add 2001:db8:8086::/48 dev dummy2 metric 21 ip route add 2001:db8:d34d::/64 via 2001:db8:8086::2 dev dummy2 metric 21 RTNETLINK answers: No route to host This change fixes the issue enforcing device lookup in ip6_nh_lookup_table() v1->v2: updated commit message title Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") Reported-and-tested-by: Beniamino Galvani <bgalvani@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27Merge tag 'linux-can-fixes-for-4.7-20160623' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-06-23 this is a pull request of 3 patches for the upcoming linux-4.7 release. The first two patches are by Oliver Hartkopp fixing oopes in the generic CAN device netlink handling. Jimmy Assarsson's patch for the kvaser_usb driver adds support for more devices by adding their USB product ids. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27net: smsc911x: Fix bug where PHY interrupts are overwritten by 0Jeremy Linton
By default, mdiobus_alloc() sets the PHYs to polling mode, but a pointer size memcpy means that a couple IRQs end up being overwritten with a value of 0. This means that PHY_POLL is disabled and results in unpredictable behavior depending on the PHY's location on the MDIO bus. Remove that memcpy and the now unused phy_irq member to force the SMSC911x PHYs into polling mode 100% of the time. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23MAINTAINERS: Update Mellanox's mlx4 Eth NIC driver entryOr Gerlitz
Tariq Toukan is replacing Eugenia (Jenny) Emantayev as the mlx4 Ethernet driver maintainer, thanks to Jenny and good luck to him. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23Merge tag 'wireless-drivers-for-davem-2016-06-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.7 iwlwifi * fix the scan timeout for long scans * fix an RCU splat caused when updating the TKIP key * fix a potential NULL-derefence introduced recently * fix a IGTK key bug that has existed since the MVM driver was introduced * fix some fw capabilities checks that got accidentally inverted rtl8xxxu * fix typo on variable name ath10k * fix deadlock when peer cannot be created * fix crash related to printing features * fix deadlock while processing rx_in_ord_ind ath9k * fix GPIO mask regression for AR9462 and AR9565 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23geneve: fix tx_errors statisticsHaishuang Yan
Tx errors present summation of errors encountered while transmitting packets. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23net: vrf: replace hard tab with space in assignmentChris Packham
The assignment of rth->dst.output in vrf_rt6_create() and vrf_rtable_create() used a hard tab before the '='. The neighboring assignments did not. Make the assignment of rth->dst.output consistent with the surrounding code. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23netem: fix a use after freeEric Dumazet
If the packet was dropped by lower qdisc, then we must not access it later. Save qdisc_pkt_len(skb) in a temp variable. Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23act_ife: acquire ife_mod_lock before reading ifeoplistWANG Cong
Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23act_ife: only acquire tcf_lock for existing actionsWANG Cong
Alexey reported that we have GFP_KERNEL allocation when holding the spinlock tcf_lock. Actually we don't have to take that spinlock for all the cases, especially for the new one we just create. To modify the existing actions, we still need this spinlock to make sure the whole update is atomic. For net-next, we can get rid of this spinlock because we already hold the RTNL lock on slow path, and on fast path we can use RCU to protect the metalist. Joint work with Jamal. Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23esp: Fix ESN generation under UDP encapsulationHerbert Xu
Blair Steven noticed that ESN in conjunction with UDP encapsulation is broken because we set the temporary ESP header to the wrong spot. This patch fixes this by first of all using the right spot, i.e., 4 bytes off the real ESP header, and then saving this information so that after encryption we can restore it properly. Fixes: 7021b2e1cddd ("esp4: Switch to new AEAD interface") Reported-by: Blair Steven <Blair.Steven@alliedtelesis.co.nz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23can: kvaser_usb: Add support for more Kvaser Leaf v2 devicesJimmy Assarsson
This patch adds support for Kvaser Leaf Light HS v2 OEM, Mini PCI Express 2xHS and USBcan Light 2xHS. Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-23can: fix oops caused by wrong rtnl dellink usageOliver Hartkopp
For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2fd ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by: ajneu <ajneu1@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-23can: fix handling of unmodifiable configuration options fixOliver Hartkopp
With upstream commit bb208f144cf3f59 (can: fix handling of unmodifiable configuration options) a new can_validate() function was introduced. When invoking 'ip link set can0 type can' without any configuration data can_validate() tries to validate the content without taking into account that there's totally no content. This patch adds a check for missing content. Reported-by: ajneu <ajneu1@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-22Merge branch 'mlx4-fixes'David S. Miller
Tariq Toukan says: ==================== mlx4_en fixes for 4.7-rc This small patchset includes two small fixes for mlx4_en driver. One allows a clean shutdown even when clients do not release their netdev reference. The other adds error return values to the VLAN VID add/kill functions. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22net/mlx4_en: Avoid unregister_netdev at shutdown flowEran Ben Elisha
This allows a clean shutdown, even if some netdev clients do not release their reference from this netdev. It is enough to release the HW resources only as the kernel is shutting down. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22net/mlx4_en: Fix the return value of a failure in VLAN VID add/killKamal Heib
Modify mlx4_en_vlan_rx_[add/kill]_vid to return error value in case of failure. Fixes: 8e586137e6b6 ('net: make vlan ndo_vlan_rx_[add/kill]_vid return error value') Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22tipc: unclone unbundled buffers before forwardingJon Paul Maloy
When extracting an individual message from a received "bundle" buffer, we just create a clone of the base buffer, and adjust it to point into the right position of the linearized data area of the latter. This works well for regular message reception, but during periods of extremely high load it may happen that an extracted buffer, e.g, a connection probe, is reversed and forwarded through an external interface while the preceding extracted message is still unhandled. When this happens, the header or data area of the preceding message will be partially overwritten by a MAC header, leading to unpredicatable consequences, such as a link reset. We now fix this by ensuring that the msg_reverse() function never returns a cloned buffer, and that the returned buffer always contains sufficient valid head and tail room to be forwarded. Reported-by: Erik Hugne <erik.hugne@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22kcm: fix /proc memory leakJiri Slaby
Every open of /proc/net/kcm leaks 16 bytes of memory as is reported by kmemleak: unreferenced object 0xffff88059c0e3458 (size 192): comm "cat", pid 1401, jiffies 4294935742 (age 310.720s) hex dump (first 32 bytes): 28 45 71 96 05 88 ff ff 00 10 00 00 00 00 00 00 (Eq............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8156a2de>] kmem_cache_alloc_trace+0x16e/0x230 [<ffffffff8162a479>] seq_open+0x79/0x1d0 [<ffffffffa0578510>] kcm_seq_open+0x0/0x30 [kcm] [<ffffffff8162a479>] seq_open+0x79/0x1d0 [<ffffffff8162a8cf>] __seq_open_private+0x2f/0xa0 [<ffffffff81712548>] seq_open_net+0x38/0xa0 ... It is caused by a missing free in the ->release path. So fix it by providing seq_release_net as the ->release method. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Fixes: cd6e111bf5 (kcm: Add statistics and proc interfaces) Cc: "David S. Miller" <davem@davemloft.net> Cc: Tom Herbert <tom@herbertland.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22team: Fix possible deadlock during team enslaveIdo Schimmel
Both dev_uc_sync_multiple() and dev_mc_sync_multiple() require the source device to be locked by netif_addr_lock_bh(), but this is missing in team's enslave function, so add it. This fixes the following lockdep warning: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(_xmit_ETHER/1); local_irq_disable(); lock(&(&mc->mca_lock)->rlock); lock(&team_netdev_addr_lock_key); <Interrupt> lock(&(&mc->mca_lock)->rlock); *** DEADLOCK *** Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22Merge tag 'linux-can-fixes-for-4.7-20160620' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-06-20 this is a pull request of 3 patches for the upcoming linux-4.7 release. The first patch is by Thor Thayer for the c_can/d_can driver. It fixes the registar access on Altera Cyclone devices, which caused CAN frames to have 0x0 in the first two bytes incorrectly. Wolfgang Grandegger's patch for the at91 driver fixes a hanging driver under high bus load situations. A patch for the gs_usb driver by Maximilian Schneider adds support for the bytewerk.org candleLight interface. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-20can: gs_usb: Add Basic support for the bytewerk.org candleLight interfaceMaximilian Schneider
This patchs adds basic support for the bytewerk.org candleLight interface, a open hardware (CERN OHL) USB CAN adapter. Signed-off-by: Hubert Denkmair <hubert@denkmair.de> Signed-off-by: Maximilian Schneider <max@schneidersoft.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-20can: at91_can: RX queue could get stuck at high bus loadWolfgang Grandegger
At high bus load it could happen that "at91_poll()" enters with all RX message boxes filled up. If then at the end the "quota" is exceeded as well, "rx_next" will not be reset to the first RX mailbox and hence the interrupts remain disabled. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Tested-by: Amr Bekhit <amrbekhit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-20can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone ↵Thor Thayer
access When testing CAN write floods on Altera's CycloneV, the first 2 bytes are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also observed bytes 4 & 5 were corrupted in some cases. The D_CAN Data registers are 32 bits and changing from 16 bit writes to 32 bit writes fixes the problem. Testing performed on Altera CycloneV (D_CAN). Requesting tests on other C_CAN & D_CAN platforms. Reported-by: Richard Andrysek <richard.andrysek@gomtec.de> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-19Merge branch 'qed-fixes'David S. Miller
Yuval Mintz says: ==================== qed*: Fixes series This series contains several small fixes to driver behavior [4th patch is the only one containing a 'fatal' fix, but the error is only theoretical for qede; if would require another protocol driver yet unsubmitted to reach it]. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19qed: Add missing port-modeYuval Mintz
The 'MODULE_FIBER' value replaced several other FIBER values in newer management firmware images, so existing code would fail to properly reflect its mode. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19qed: Fix returning unlimited SPQ entriesYuval Mintz
Driver has 2 sets of entries for handling ramrod configurations toward firmware - a regular pre-allocated set of entires and a possible 'unlimited' list of additional pending entries. In most scenarios the 'unlimited' list would not be used, but when it does the handling of the ramrod completion doesn't properly handle the release of the entry. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 12:15:50 +0000