| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Remove unnecessary locking around _OSC (Bjorn Helgaas)
- Clarify message about _OSC failure (Bjorn Helgaas)
- Remove notification of PCIe bandwidth changes (Bjorn Helgaas)
- Tidy checking of syscall user config accessors (Heiner Kallweit)
Resource management:
- Decline to resize resources if boot config must be preserved (Ard
Biesheuvel)
- Fix pci_register_io_range() memory leak (Geert Uytterhoeven)
Error handling (Keith Busch):
- Clear error status from the correct device
- Retain error recovery status so drivers can use it after reset
- Log the type of Port (Root or Switch Downstream) that we reset
- Always request a reset for Downstream Ports in frozen state
Endpoint framework and NTB (Kishon Vijay Abraham I):
- Make *_get_first_free_bar() take into account 64 bit BAR
- Add helper API to get the 'next' unreserved BAR
- Make *_free_bar() return error codes on failure
- Remove unused pci_epf_match_device()
- Add support to associate secondary EPC with EPF
- Add support in configfs to associate two EPCs with EPF
- Add pci_epc_ops to map MSI IRQ
- Add pci_epf_ops to expose function-specific attrs
- Allow user to create sub-directory of 'EPF Device' directory
- Implement ->msi_map_irq() ops for cadence
- Configure LM_EP_FUNC_CFG based on epc->function_num_map for cadence
- Add EP function driver to provide NTB functionality
- Add support for EPF PCI Non-Transparent Bridge
- Add specification for PCI NTB function device
- Add PCI endpoint NTB function user guide
- Add configfs binding documentation for pci-ntb endpoint function
Broadcom STB PCIe controller driver:
- Add support for BCM4908 and external PERST# signal controller
(Rafał Miłecki)
Cadence PCIe controller driver:
- Retrain Link to work around Gen2 training defect (Nadeem Athani)
- Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof
Wilczyński)
Freescale Layerscape PCIe controller driver:
- Add LX2160A rev2 EP mode support (Hou Zhiqiang)
- Convert to builtin_platform_driver() (Michael Walle)
MediaTek PCIe controller driver:
- Fix OF node reference leak (Krzysztof Wilczyński)
Microchip PolarFlare PCIe controller driver:
- Add Microchip PolarFire PCIe controller driver (Daire McNamara)
Qualcomm PCIe controller driver:
- Use PHY_REFCLK_USE_PAD only for ipq8064 (Ansuel Smith)
- Add support for ddrss_sf_tbu clock for sm8250 (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Drop PCIE_RCAR config option (Lad Prabhakar)
- Always allocate MSI addresses in 32bit space (Marek Vasut)
Rockchip PCIe controller driver:
- Add FriendlyARM NanoPi M4B DT binding (Chen-Yu Tsai)
- Make 'ep-gpios' DT property optional (Chen-Yu Tsai)
Synopsys DesignWare PCIe controller driver:
- Work around ECRC configuration hardware defect (Vidya Sagar)
- Drop support for config space in DT 'ranges' (Rob Herring)
- Change size to u64 for EP outbound iATU (Shradha Todi)
- Add upper limit address for outbound iATU (Shradha Todi)
- Make dw_pcie ops optional (Jisheng Zhang)
- Remove unnecessary dw_pcie_ops from al driver (Jisheng Zhang)
Xilinx Versal CPM PCIe controller driver:
- Fix OF node reference leak (Pan Bian)
Miscellaneous:
- Remove tango host controller driver (Arnd Bergmann)
- Remove IRQ handler & data together (altera-msi, brcmstb, dwc)
(Martin Kaiser)
- Fix xgene-msi race in installing chained IRQ handler (Martin
Kaiser)
- Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He)
- Fix pci-bridge-emul array overruns (Russell King)
- Remove obsolete uses of WARN_ON(in_interrupt()) (Sebastian Andrzej
Siewior)"
* tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (69 commits)
PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064
PCI: qcom: Add support for ddrss_sf_tbu clock
dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250
PCI: al: Remove useless dw_pcie_ops
PCI: dwc: Don't assume the ops in dw_pcie always exist
PCI: dwc: Add upper limit address for outbound iATU
PCI: dwc: Change size to u64 for EP outbound iATU
PCI: dwc: Drop support for config space in 'ranges'
PCI: layerscape: Convert to builtin_platform_driver()
PCI: layerscape: Add LX2160A rev2 EP mode support
dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings
PCI: dwc: Work around ECRC configuration issue
PCI/portdrv: Report reset for frozen channel
PCI/AER: Specify the type of Port that was reset
PCI/ERR: Retain status from error notification
PCI/AER: Clear AER status from Root Port when resetting Downstream Port
PCI/ERR: Clear status of the reporting device
dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
PCI: rockchip: Make 'ep-gpios' DT property optional
Documentation: PCI: Add PCI endpoint NTB function user guide
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
|
|
The NanoPi M4B is a minor revision of the original M4.
The differences against the original Nanopi M4 that are common with the
other M4V2 revision include:
- microphone header removed
- power button added
- recovery button added
Additional changes specific to the M4B:
- USB 3.0 hub removed; board now has 2x USB 3.0 type-A ports and 2x
USB 2.0 ports
- ADB toggle switch added; this changes the top USB 3.0 host port to
a peripheral port
- Type-C port no longer supports data or PD
- WiFi/Bluetooth combo chip switched to AP6256, which supports BT 5.0
but only 1T1R (down from 2T2R) for WiFi
Add a compatible string for the new board revision.
Link: https://lore.kernel.org/r/20210121162321.4538-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host
fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device().
In preparation for this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
* tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
driver core: platform: Drop of_device_node_put() wrapper
of: Remove of_dev_{get,put}()
dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
dt-bindings: can: rcar_canfd: Group tuples in pin control properties
dt-bindings: power: renesas,apmu: Group tuples in cpus properties
dt-bindings: mtd: spi-nor: Convert to DT schema format
dt-bindings: Use portable sort for version cmp
dt-bindings: ethernet-controller: fix fixed-link specification
dt-bindings: irqchip: Add node name to PRUSS INTC
dt-bindings: interconnect: Fix the expected number of cells
dt-bindings: Fix errors in 'if' schemas
dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required
dt-bindings: Fix undocumented compatible strings in examples
kbuild: Add support to build overlays (%.dtbo)
scripts: dtc: Remove the unused fdtdump.c file
scripts: dtc: Build fdtoverlay tool
scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
scripts: dtc: Fetch fdtoverlay.c from external DTC project
dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings
dt-bindings: iio: dac: Fix AD5686 references
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"It's been a relatively calm release cycle and we're actually removing
more code than we're adding.
Summary:
- new driver for the Toshiba Visconti platform
- rework of interrupt handling in gpio-tegra
- updates for GPIO selftests: we're now using the character device to
perform the subsystem checks
- support for a new rcar variant + some code refactoring
- refactoring of gpio-ep93xx
- SPDX License identifier has been updated in the uapi header so that
userspace programs bundling it can become fully REUSE-compliant
- improvements to pwm handling in gpio-mvebu
- support for interrupt handling and power management for gpio-xilinx
as well as some code refactoring
- support for a new chip variant in gpio-pca953x
- removal of drivers: zte xs & intel-mid and removal of leftovers
from intel-msic
- impovements to intel drivers pulled from Andy Shevchenko
- improvements to the gpio-aggregator virtual GPIO driver
- and several minor tweaks and fixes to code and documentation all
over the place"
* tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits)
gpio: pcf857x: Fix missing first interrupt
gpio: ep93xx: refactor base IRQ number
gpio: ep93xx: refactor ep93xx_gpio_add_bank
gpio: ep93xx: Fix typo s/hierarchial/hierarchical
gpio: ep93xx: drop to_irq binding
gpio: ep93xx: Fix wrong irq numbers in port F
gpio: uapi: use the preferred SPDX license identifier
gpio: gpio-xilinx: Add check if width exceeds 32
gpio: gpio-xilinx: Add support for suspend and resume
gpio: gpio-xilinx: Add interrupt support
gpio: gpio-xilinx: Reduce spinlock array to array
gpio: gpio-xilinx: Simplify with dev_err_probe()
gpio: msic: Drop driver from Makefile
gpio: wcove: Split out to_ireg() helper and deduplicate the code
gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits()
gpio: wcove: Get rid of error prone casting in IRQ handler
gpio: intel-mid: Remove driver for deprecated platform
gpio: msic: Remove driver for deprecated platform
gpio: aggregator: Remove trailing comma in terminator entries
gpio: aggregator: Use compound literal from the header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Battery/charger driver changes:
- acer_a500: new fuel gauge driver for Acer Iconia Tab A500
- bq256xx: new charger driver
- bq27xxx: Support CHARGE_NOW for bq27z561/bq28z610/bq34z100
- bq27xxx: Fix inverted CURRENT_NOW sign
- cpcap: rework fuel gauge and charger drivers
- ltc4162l: new charger driver
- max8997-charger: add extcon based current limit configuration
- max8903, wm97xx, z2: convert to GPIO descriptors (incl. ARM board files)
- misc cleanup and fixes
Reset drivers:
- new poweroff driver for ATC260x
- at91-sama5d2_shdwc: add support for sama7g5
- drop zte zx driver (SoC support is removed from kernel)"
* tag 'for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (55 commits)
power-supply: use kobj_to_dev()
power: supply: charger-manager: fix typo
power/reset: remove zte zx driver
power: supply: bq25980: Fix repetive bq25975 with bq25960
power: supply: smb347-charger: Fix interrupt usage if interrupt is unavailable
power: supply: axp20x_usb_power: Init work before enabling IRQs
power: supply: fix sbs-charger build, needs REGMAP_I2C
power: supply: bq27xxx: fix polarity of current_now
power: supply: charger-manager: fix incorrect health status
power: reset: at91-sama5d2_shdwc: add support for sama7g5
dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc
power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
dt-bindings: power/supply: Add ltc4162-l-charger
power: supply: bq24190_charger: convert comma to semicolon
power: supply: ab8500_fg: convert comma to semicolon
power: supply: ds2780: Switch to using the new API kobj_to_dev()
power: supply: bq27xxx: Support CHARGE_NOW for bq27z561/bq28z610/bq34z100
power: supply: cpcap-charger: Fix power_supply_put on null battery pointer
power: supply: cpcap-battery: constify psy_desc
power: supply: cpcap-battery: Fix typo
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- vDSO build improvements including support for building with BSD.
- Cleanup to the AMU support code and initialisation rework to support
cpufreq drivers built as modules.
- Removal of synthetic frame record from exception stack when entering
the kernel from EL0.
- Add support for the TRNG firmware call introduced by Arm spec
DEN0098.
- Cleanup and refactoring across the board.
- Avoid calling arch_get_random_seed_long() from
add_interrupt_randomness()
- Perf and PMU updates including support for Cortex-A78 and the v8.3
SPE extensions.
- Significant steps along the road to leaving the MMU enabled during
kexec relocation.
- Faultaround changes to initialise prefaulted PTEs as 'old' when
hardware access-flag updates are supported, which drastically
improves vmscan performance.
- CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
(#1024718)
- Preparatory work for yielding the vector unit at a finer granularity
in the crypto code, which in turn will one day allow us to defer
softirq processing when it is in use.
- Support for overriding CPU ID register fields on the command-line.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
drivers/perf: Replace spin_lock_irqsave to spin_lock
mm: filemap: Fix microblaze build failure with 'mmu_defconfig'
arm64: Make CPU_BIG_ENDIAN depend on ld.bfd or ld.lld 13.0.0+
arm64: cpufeatures: Allow disabling of Pointer Auth from the command-line
arm64: Defer enabling pointer authentication on boot core
arm64: cpufeatures: Allow disabling of BTI from the command-line
arm64: Move "nokaslr" over to the early cpufeature infrastructure
KVM: arm64: Document HVC_VHE_RESTART stub hypercall
arm64: Make kvm-arm.mode={nvhe, protected} an alias of id_aa64mmfr1.vh=0
arm64: Add an aliasing facility for the idreg override
arm64: Honor VHE being disabled from the command-line
arm64: Allow ID_AA64MMFR1_EL1.VH to be overridden from the command line
arm64: cpufeature: Add an early command-line cpufeature override facility
arm64: Extract early FDT mapping from kaslr_early_init()
arm64: cpufeature: Use IDreg override in __read_sysreg_by_encoding()
arm64: cpufeature: Add global feature override facility
arm64: Move SCTLR_EL1 initialisation to EL-agnostic code
arm64: Simplify init_el2_state to be non-VHE only
arm64: Move VHE-specific SPE setup to mutate_to_vhe()
arm64: Drop early setting of MDSCR_EL2.TPMS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
SCMI firmware:
- add support for a completion interrupt
Reset controllers:
- new driver for BCM4908
- new devm_reset_control_get_optional_exclusive_released() function
Memory controllers:
- Renesas RZ/G2 support
- Tegra124 interconnect support
- Allow more drivers to be loadable modules
TEE/optee firmware:
- minor code cleanup
The other half of this is SoC specific drivers that do not belong into
any other subsystem, most of them living in drivers/soc:
- Allwinner/sunxi power management work
- Allwinner H616 support
- ASpeed AST2600 system identification support
- AT91 SAMA7G5 SoC ID driver
- AT91 SoC driver cleanups
- Broadcom BCM4908 power management bus support
- Marvell mbus cleanups
- Mediatek MT8167 power domain support
- Qualcomm socinfo driver support for PMIC
- Qualcomm SoC identification for many more products
- TI Keystone driver cleanups for PRUSS and elsewhere"
* tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits)
soc: aspeed: socinfo: Add new systems
soc: aspeed: snoop: Add clock control logic
memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
memory: samsung: exynos5422-dmc: Correct function names in kerneldoc
memory: ti-emif-pm: Drop of_match_ptr from of_device_id table
optee: simplify i2c access
drivers: soc: atmel: fix type for same7
tee: optee: remove need_resched() before cond_resched()
soc: qcom: ocmem: don't return NULL in of_get_ocmem
optee: sync OP-TEE headers
tee: optee: fix 'physical' typos
drivers: optee: use flexible-array member instead of zero-length array
tee: fix some comment typos in header files
soc: ti: k3-ringacc: Use of_device_get_match_data()
soc: ti: pruss: Refactor the CFG sub-module init
soc: mediatek: pm-domains: Don't print an error if child domain is deferred
soc: mediatek: pm-domains: Add domain regulator supply
dt-bindings: power: Add domain regulator supply
soc: mediatek: cmdq: Remove cmdq_pkt_flush()
soc: mediatek: pm-domains: Add support for mt8167
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"After the last release contained a surprising amount of new 32-bit
machines, this time two thirds of the code changes are for 64-bit.
The usual updates to existing files include:
- Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA,
nomadik, stm32, Allwinner, TI Keystone
- Support for additional devices on existing machines on Renesas,
SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom,
ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic,
Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba
- Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung,
stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm,
i.MX, Rockchip, ASpeed, Zynq
Only three new SoCs this time, but a number of boards across:
Renesas:
- Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based)
Intel SoCFPGA:
- eASIC N5X board (N5X)
ST-Ericsson Ux500:
- Samsung GT-I9070 (Janice) phone (u8500)
TI OMAP:
- MYIR Tech Limited development board (AM335X)
Allwinner/sunxi:
- SL631 Action Camera (V3)
- PineTab Early Adopter tablet (A64)
Broadcom:
- BCM4906 networking chip
- Netgear R8000P router (BCM4906)
AMLogic:
- Hardkernel ODROID-HC4 development board (SM1)
- Beelink GS-King-X TV Box (S922X)
Qualcomm:
- Snapdragon 888 / SM8350 high-end phone SoC
- Qualcomm SDX55 5G modem as standalone SoC
- Snapdragon MTP reference board (SM8350)
- Snapdragon MTP reference board (SDX55)
- Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094)
- Alcatel Idol 3 phone (MSM8916)
- ASUS Zenfone 2 Laser phone (MSM8916)
- BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916)
- OnePlus6 phone (SDM845)
- OnePlus6T phone (SDM845)
- Alfa Network AP120C-AC access point (IPQ4018)
NXP i.MX6 (32-bit):
- Plymovent BAS base system controller for filter systems (imx6dl)
- Protonic MVT industrial touchscreen terminals (imx6dl)
- Protonic PRTI6G reference board (imx6ul)
- Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp)
NXP i.MX8 (64-bit)
- Beacon i.MX8M Nano development kit (imx8mn)
- Boundary Devices i.MX8MM Nitrogen SBC (imx8mm)
- Gateworks Venice i.MX 8M Mini Development Kits (imx8mm)
- phyBOARD-Pollux-i.MX8MP (imx8mp)
- Purism Librem5 Evergreen phone (imx8mp)
- Kontron SMARC-sAL28 system-on-module(imx8mp)
Rockchip:
- NanoPi M4B Single-board computer (RK3399)
- Radxa Rock Pi E router SBC (RK3328)
ASpeed:
- Ampere Mt. Jade, a BMC for an x86 server (AST2500)
- IBM Everest, a BMC for a Power10 server (AST2600)
- Supermicro x11spi, a BMC for an ARM server (AST2500)
Zynq:
- Ebang EBAZ4205, FPGA board (Zynq-7000)
- ZynqMP zcu104 revC reference platform (ZynqMP)"
* tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits)
ARM: dts: aspeed: align GPIO hog names with dtschema
ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell
dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml
arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver
ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci
ARM: dts: aspeed: mowgli: Add i2c rtc device
ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address
dt-bindings: arm: xilinx: Add missing Zturn boards
ARM: dts: ebaz4205: add pinctrl entries for switches
ARM: dts: add Ebang EBAZ4205 device tree
dt-bindings: arm: add Ebang EBAZ4205 board
dt-bindings: add ebang vendor prefix
ARM: dts: aspeed: Add Everest BMC machine
ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
ARM: dts: aspeed: Add Supermicro x11spi BMC machine
ARM: dts: aspeed: g220a: Fix some gpio
ARM: dts: aspeed: g220a: Enable ipmb
ARM: dts: aspeed: rainier: Add eMMC clock phase compensation
ARM: dts: aspeed: Add LCLK to lpc-snoop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform removals from Arnd Bergmann:
"There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use, and
received confirmation about six ARM platforms and the TI C6x
architecture that have all reached the end of their life upstream,
with no known users remaining:
- efm32 - added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell - added in 2011, abandoned after 2012 acquisition
- prima2 - added in 20111, no notable changes since 2015
- tango - added in 2015, sporadic changes until 2017, but abandoned
- u300 - added in 2009, no notable changes since 2013
- zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x - added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users that
plan to contribute them in the future, in other cases the code is
complete and works reliably"
Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: remove u300 platform
ARM: remove tango platform
ARM: remove zte zx platform
ARM: remove sirf prima2/atlas platforms
c6x: remove architecture
MAINTAINERS: Remove deleted platform efm32
ARM: drop efm32 platform
ARM: Remove PicoXcell platform support
ARM: dts: Remove PicoXcell platforms
|
|
Update the example as well. Add the '#pwm-cells' and 'clocks' properties
for a complete working example.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
into arm/dt
ARM: dts: Zynq DT changes for v5.12-v2
- Add Ebang board support
- Add missing zturn boards in dt binding
- And convert Zynq QSPI binding
* tag 'zynq-dt-for-v5.12-v2' of https://github.com/Xilinx/linux-xlnx:
dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml
dt-bindings: arm: xilinx: Add missing Zturn boards
ARM: dts: ebaz4205: add pinctrl entries for switches
ARM: dts: add Ebang EBAZ4205 device tree
dt-bindings: arm: add Ebang EBAZ4205 board
dt-bindings: add ebang vendor prefix
Link: https://lore.kernel.org/r/19e0e0c9-1bed-bba5-6c80-6903937b3d96@xilinx.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add missing DT compatible strings for Zturn boards.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/f6f642d75c1b1160ed78f6de0a2944ab64017691.1612185370.git.michal.simek@xilinx.com
Acked-by: Rob Herring <robh@kernel.org>
|
|
Add the Ebang EBAZ4205 board to the Zynq-7000 board category.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210120194033.26970-3-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for 5.12
The socinfo driver gains support for dumping information about the platform's
PMICs, as well as new definitions for a number of platforms. The LLCC driver
gains SM8250 support, AOSS QMP gains SM8350 support and the RPMPD driver gains
support for MSM8994 power domains. In addition to this it contains a few minor
fixes in the ocmem, rpmh and llcc drivers.
* tag 'qcom-drivers-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: ocmem: don't return NULL in of_get_ocmem
soc: qcom: socinfo: Remove unwanted le32_to_cpu()
soc: qcom: aoss: Add SM8350 compatible
drivers: soc: qcom: rpmpd: Add msm8994 RPM Power Domains
soc: qcom: socinfo: Fix an off by one in qcom_show_pmic_model()
soc: qcom: socinfo: Fix off-by-one array index bounds check
soc: qcom: socinfo: Add MDM9607 IDs
soc: qcom: socinfo: Add SoC IDs for APQ/MSM8998
soc: qcom: socinfo: Add SoC IDs for 630 family
soc: qcom: socinfo: Open read access to all for debugfs
soc: qcom: socinfo: add info from PMIC models array
soc: qcom: socinfo: add several PMIC IDs
soc: qcom: socinfo: add qrb5165 SoC ID
soc: qcom: rpmh: Remove serialization of TCS commands
soc: qcom: smem: use %*ph to print small buffer
dt-bindings: soc: qcom: convert qcom,smem bindings to yaml
drivers: qcom: rpmh-rsc: Do not read back the register write on trigger
soc: qcom: llcc-qcom: Add support for SM8250 SoC
soc: qcom: llcc-qcom: Extract major hardware version
dt-bindings: msm: Add LLCC for SM8250
Link: https://lore.kernel.org/r/20210204052258.388890-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New boards: Radxa Rock Pi E, NanoPi M4B
More fixed indices for mmc nodes; removal of obsolete amba bus nodes;
nand-flash-controller nodes for px30 and rk3308; rk3399 pcie ranges fix;
board-level fixes for Helios64, NanoPi and Rock960; more sound support
for rock64 and rockpro64 and cleanups to make dt-bindings happier.
* tag 'v5.12-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (24 commits)
arm64: dts: rockchip: more user friendly name of sound nodes
arm64: dts: rockchip: rename pinctrl nodename to gmac2io for nanopi-r2s board
arm64: dts: rockchip: assign a fixed index to mmc devices on rk3368 boards
arm64: dts: rockchip: assign a fixed index to mmc devices on rk3308 boards
arm64: dts: rockchip: assign a fixed index to mmc devices on px30 boards
arm64: dts: rockchip: cleanup cpu_thermal node of rk3399-rock960.dts
arm64: dts: rockchip: Remove bogus "amba" bus nodes
arm64: dts: rockchip: Light "sys" LED on NanoPi R2S
arm64: dts: rockchip: fix ranges property format for rk3399 pcie node
arm64: dts: rockchip: Rely on SoC external pull up on pmic-int-l on Helios64
arm64: dts: rockchip: Add NanoPi M4B board
arm64: dts: rockchip: Move ep-gpios property to nanopc-t4 from nanopi4
arm64: dts: rockchip: Add NFC node for PX30 SoC
arm64: dts: rockchip: Add NFC node for RK3308 SoC
arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E
dt-bindings: arm: rockchip: Add Radxa ROCK Pi E
arm64: dts: rockchip: rk3328: Add clock_in_out property to gmac2phy node
arm64: dts: rockchip: rename thermal subnodes for rk3399
arm64: dts: rockchip: rename thermal subnodes for rk3368
arm64: dts: rockchip: add SPDIF node for rk3399-rockpro64
...
Link: https://lore.kernel.org/r/12699743.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT bindings update for 5.12:
- Various board compatible additions to fsl.yaml.
- Add vendor prefix for Plymovent and Kverneland Group.
- Update simple panel bindings to include compatible for EDT and Kyocera
panels.
* tag 'imx-bindings-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: imx: add imx8mm nitrogen support
dt-bindings: arm: fsl: Add the librem 5 Evergreen revision
dt-bindings: arm: fsl: add Kverneland TGO board
dt-bindings: arm: fsl: add Kverneland UT1, UT1Q and UI1P boards
dt-bindings: vendor-prefixes: Add an entry for Kverneland Group
dt-bindings: arm: fsl: add Kontron sl28 variant 1
bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings
dt-bindings: arm: fsl: add Protonic PRTI6G board
dt-bindings: arm: fsl: add Protonic MVT board
dt-bindings: arm: fsl: Add binding for Gateworks boards with IMX8MM
dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID
dt-bindings: arm: fsl: add Plymovent BAS board
dt-bindings: arm: fsl: add Plymovent M2M board
dt-bindings: vendor-prefixes: Add an entry for Plymovent
dt-bindings: display: simple: Add Kyocera tcg070wvlq panel
dt-bindings: display: simple: add EDT compatibles already supported by the driver
dt-bindings: display: simple: fix alphabetical order for EDT compatibles
dt-bindings: arm: fsl: Add beacon,imx8mn-beacon-kit
Link: https://lore.kernel.org/r/20210204120150.26186-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM dts updates for 5.12
Introduces the Qualcomm SDX55 platform and the platform's MTP device,
with support for NAND, SDHCI and USB.
USB is enabled for IPQ4019 and the Alfa Network AP120C-AC and 8devices
Jalapeno boards are added.
Samsung Galaxy S5 gains display and GPU support.
* tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (38 commits)
ARM: dts: qcom: msm8974-klte: Mark essential regulators
ARM: dts: qcom: msm8974-klte: add support for display
ARM: dts: qcom: msm8974-klte: add support for GPU
ARM: dts: qcom: msm8974: add gpu support
ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node
ARM: dts: qcom: replace status value "ok" by "okay"
ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi
ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3
ARM: dts: qcom: add Alfa Network AP120C-AC
ARM: dts: qcom: add 8devices Jalapeno
ARM: dts: qcom: ipq4019: add more labels
ARM: dts: qcom: ipq4019: add USB devicetree nodes
ARM: dts: qcom: add prng definition to ipq806x
ARM: dts: qcom: sdx55: Add pshold support
ARM: dts: qcom: sdx55: Add Watchdog support
dt-bindings: watchdog: Add binding for Qcom SDX55
ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY support
ARM: dts: qcom: sdx55: Add USB3 and PHY support
dt-bindings: usb: qcom,dwc3: Add binding for SDX55
ARM: dts: qcom: msm8974-klte: Fix shdc numbering
...
Link: https://lore.kernel.org/r/20210204052320.388999-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for 5.12
This introduces initial support for the new SM8350 platform, aka
Snapdragon 888, and the MTP device for this.
It adds PCIe, audio, display, GPU, HDMI watchdog, LLCC and PMIC ADC
support to the SM8250 platform and RB5 in particular, as well as improve
the definition of CPUs, thermal zones and fixes a few smaller issues.
It introduces new Devicetree files for the Alcatel Idol 3, ASUS Zenfone
2 Laser and BQ Aquaris X5, based on the MSM8916 platform.
It contains an overhaul of the existing MSM8992 and MSM8994 platform
files and introduces RPM power domains and SMP2P nodes. It adds
touchscreen, additional regulators, microSD card support and adds the
Sony Mobile Ivy, Karin, Suzuran and Satsuki devices. It joins the common
parts of the Lumia 950 and 950XL and extend these with support for
sensors, NFC, bluetooth, audio, microSD and Type-C mux pins.
It introduces support for the OnePlus6 and 6t, adds the missing higher
frequences for the SDM850 laptops, adds CPU cluster idle support on
SM8150 and a few tweaks to the SC7180 platform.
* tag 'qcom-arm64-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (100 commits)
arm64: dts: qcom: msm8998: Use rpmpd definitions for opp table levels
arm64: dts: qcom: msm8996: Add missing device_type under pcie[01]
arm64: dts: qcom: sc7180: Add support for gpu fuse
arm64: dts: qcom: msm8998: Disable some components by default
arm64: dts: qcom: msm8998: Add capacity-dmips-mhz to CPU cores
arm64: dts: qcom: msm8998: Add I2C pinctrl and fix BLSP2_I2C naming
arm64: dts: qcom: msm8998: Add DMA to I2C hosts
arm64: dts: qcom: msm8998: Merge in msm8998-pins.dtsi to msm8998.dtsi
arm64: dts: msm8916: Fix reserved and rfsa nodes unit address
arm64: dts: qcom: msm8994-octagon: Add AD7147 and APDS9930 sensors
arm64: dts: qcom: msm8994-octagon: Add TAS2553 codec
arm64: dts: qcom: msm8994-octagon: Add sensors on blsp1_i2c5
arm64: dts: qcom: msm8994-octagon: Add NXP NFC node
arm64: dts: qcom: msm8994-octagon: Add FM Radio and DDR regulator nodes
arm64: dts: qcom: msm8994-octagon: Configure PON keys
arm64: dts: qcom: msm8994-octagon: Configure Lattice iCE40 FPGA
arm64: dts: qcom: msm8994-octagon: Add uSD card and disable HS400 on eMMC
arm64: dts: qcom: msm8994-octagon: Configure HD3SS460 Type-C mux pins
arm64: dts: qcom: msm8994-octagon: Add QCA6174 bluetooth
arm64: dts: qcom: msm8994-octagon: Configure regulators
...
Link: https://lore.kernel.org/r/20210204052043.388621-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: amlogic updates for v5.12
- new board: Hardkernel ODROID-HC4 (SoC: SM1)
- new board: Beelink GS-King-X (SoC: S922X)
- shorten shorten audio card names for alsa compatibility
- misc cleanups & fixes
* tag 'amlogic-dt64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: add initial device-tree for ODROID-HC4
dt-bindings: arm: amlogic: add ODROID-HC4 bindings
arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi
arm64: dts: meson: sort Amlogic dtb Makefile
dt-bindings: arm: amlogic: sort SM1 bindings
arm64: dts: meson: fix broken wifi node for Khadas VIM3L
arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to ODROID-N2 dtsi
ARM: dts: meson: add the AO ARC remote processor
dt-bindings: Amlogic: add the documentation for the SECBUS2 registers
dt-bindings: sram: Add compatible strings for the Meson AO ARC SRAM
arm64: dts: meson: shorten audio card names for alsa compatibility
arm64: dts: meson: add initial Beelink GS-King-X device-tree
dt-bindings: arm: amlogic: add support for the Beelink GS-King-X
arm64: dts: meson: Fix schema warnings for pwm-leds
arm64: dts: meson: vim3: whitespace fixups
arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
Revert "arm64: dts: amlogic: add missing ethernet reset ID"
arm64: dts: amlogic: meson-g12: Set FL-adj property value
Link: https://lore.kernel.org/soc/7heehq7ag3.fsf@baylibre.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
arm/dt
arm64: dts: ZynqMP DT changes for v5.12
- Wire clock chips present on boards
- Enable reset, qspi, nand, watchdog and DP IPs
- Enable phy driver for sata and DP
- Add iommu description
- Add support for zcu104 revC+ boards
- Various small changes
- Add missing labels
- Fix typos in documentation
- Add missing boards
* tag 'zynqmp-dt-for-v5.12' of https://github.com/Xilinx/linux-xlnx:
arm64: dts: zynqmp: Wire up the DisplayPort subsystem
arm64: dts: zynqmp: Add DisplayPort subsystem
arm64: dts: zynqmp: Add DPDMA node
dt-bindings: arm: Fix typo in zcu111 board
arm64: dts: zynqmp: Add description for zcu104 revC
arm64: dts: zynqmp: Add missing iommu IDs
arm64: dts: zynqmp: Add missing lpd watchdog node
arm64: dts: zynqmp: Wire zynqmp qspi controller
arm64: dts: zynqmp: Wire arasan nand controller
arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis
arm64: dts: zynqmp: Add label for zynqmp_ipi
arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
arm64: dts: zynqmp: Enable reset controller driver
arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
arm64: dts: zynqmp: Add address-cells property to interrupt controllers
Link: https://lore.kernel.org/r/b1a6f89e-f6b4-757b-daf0-d2f1844b833d@xilinx.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the board bindings for the ODROID-HC4 device.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-5-christianshewitt@gmail.com
|
|
Document the bindings for ETMs with system register accesses.
Link: https://lore.kernel.org/r/20210110224850.1880240-27-suzuki.poulose@arm.com
Cc: devicetree@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-29-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add compatible for Cortex-A78 PMU
Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210203055348.4935-3-seiya.wang@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Sort the bindings before adding new SM1 devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-2-christianshewitt@gmail.com
|
|
The Meson8/Meson8b/Meson8m2 SoCs have a register bank called SECBUS2 which
contains registers for various IP blocks such as pin-controller bits for
the BSD_EN and TEST_N GPIOs as well as some AO ARC core control bits.
The registers can be accessed directly when not running in "secure mode".
When "secure mode" is enabled then these registers have to be accessed
through secure monitor calls.
So far these SoCs are always known to boot in "non-secure mode".
Add a binding documentation using syscon (as these registers are shared
across different IPs) for the SECBUS2 registers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210102205904.2691120-3-martin.blumenstingl@googlemail.com
|
|
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference
board with an S922X-H chip.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210119145734.12675-2-christianshewitt@gmail.com
|
|
Kryo685 is found in SM8350, so add it to the list of cpu compatibles
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127123054.263231-4-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Document the SM8350 SoC binding and also the boards using it.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127123054.263231-2-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt6779:
- add DEVAPC node to detect mallicious bus accesses
- add PMIC wrapper node
mt7622:
- add reset to mmc node
mt8183:
- fix typo in drma-fifo-size property
- refine compatible for the disp-gamma
- add phandel of PM domain to the PWM node
- add second PWM node
- add regulator to MFG power domain
- enable DSI node in kukui
- add krane sku0, which uses different panel
- fix mailbox dt-bindings include path
mt8192:
- add NOR flash node
- add PSCI based CPU idle states
mt8516:
- add node for the UART's APDMA controller
* tag 'v5.11-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8183: Fix GCE include path
dts64: mt7622: fix slow sd card access
dt-bindings: arm64: dts: mediatek: Add krane sku0
arm64: dts: mt8183: Add krane-sku0 board.
arm64: dts: mt8183: config dsi node
arm64: dts: mt6779: Support pwrap on Mediatek MT6779 platform
arm64: dts: mt6779: Support devapc
arm64: dts: mt8192: Add cpu-idle-states
arm64: dts: mediatek: mt8183: Add domain supply for mfg
arm64: dts: mt8192: add nor_flash device node
arm64: dts: mediatek: mt8516: add support for APDMA
arm64: dts: mediatek: mt8183-evb: add PWM support
arm64: dts: mediatek: mt8183: add pwm node
arm64: dts: mt8183: Add missing power-domain for pwm0 node
arm64: dts: mt8183: refine gamma compatible name
arm64: dts: mt8183: rename rdma fifo size
Link: https://lore.kernel.org/r/565be0cc-460a-7d0b-47da-09bf0401e8fe@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.12 please pull the following:
- Rafal continues to add support for the 4906/4908 SoC family and adds
a Device Tree for the Netgear R8000P router (4906-based), describes
the NAND controller of the 4908 more appropriately (based on the older
63138 DSL SoC), describes the 4908 PCIe reset controller, internal
Ethernet switch (Starfighter 2 switch) and finally the Power
Management Bus (PMB)
- Scott removes all of the SATA-related Device Tree nodes since SATA
is unused on the Stingray product line
* tag 'arm-soc/for-5.12/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Remove SATA from Stingray
arm64: dts: broadcom: bcm4908: describe PMB block
arm64: dts: broadcom: bcm4908: describe internal switch
arm64: dts: broadcom: bcm4908: describe PCIe reset controller
arm64: dts: broadcom: bcm4908: use proper NAND binding
arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files
dt-bindings: arm: bcm: document Netgear R8000P binding
Link: https://lore.kernel.org/r/20210131221721.685974-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- DT fixes spotted through the schemas
- Mali Support for the A10s/A13/GR8/R8
- MMC improvements for the A64 and H6
- New board: SL631 Action Camera, PineTab Early Adopter
* tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (47 commits)
ARM: dts: sunxi: Rename nmi_intc to r_intc
ARM: dts: sun8i: h2-plus: bananapi-m2-zero: Increase BT UART speed
ARM: dts: sunxi: bananapi-m2-plus: Increase BT UART speed
arm64: dts: allwinner: pine-h64: Fix typos in BT GPIOs
arm64: dts: allwinner: pinetab: Fix the panel compatible
arm64: dts: allwinner: pinephone: Remove useless light sensor supplies
arm64: dts: allwinner: h6: Use - instead of @ for DT OPP entries
ARM: dts: sun8i-a33: sina33: Add missing panel power supply
ARM: dts: sun8i-a83t: Remove empty CSI port
ARM: dts: sun8i-s3: pinecube: Fix CSI DTC warnings
ARM: dts: sun8i-s3: impetus: Fix the USB PHY ID detect GPIO properties
ARM: dts: sun8i: nanopi-r1: Fix GPIO regulator state array
ARM: dts: sun6i: primo81: Remove useless io-channel-cells
ARM: dts: sunxi: Fix CPU thermal zone node name
ARM: dts: sunxi: Add missing backlight supply
ARM: dts: sunxi: Fix the LED node names
dt-bindings: rtc: sun6i-a31-rtc: Loosen the requirements on the clocks
dt-bindings: iio: adc: Add AXP803 compatible
dt-bindings: sunxi: Fix the pinecube compatible
ARM: dts: sun8i-v3s: Add CSI0 MCLK pin definition
...
Link: https://lore.kernel.org/r/48511540-fdd6-4fbe-8037-ec9fa8436147.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Trivial fix.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/13d064fc4850f96904a04e330cea5295d3751e46.1611226560.git.michal.simek@xilinx.com
|
|
Xilinx ZynqMP zcu104 revC and newer board revisions have different i2c
structure compare to revA. The rest of the board is the same from software
perspective.
Also enable DMAs and QSPI.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/17f68c235ea1ce96c3293ca0cf3178951d6663f7.1611224800.git.michal.simek@xilinx.com
|
|
Krane-sku0 is similar to krane-sku176 but using a different panel
source.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210113110400.616319-3-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The Nitrogen8M Mini is an ARM based single board computer (SBC).
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: tegra: Changes for v5.12-rc1
Exposed a new QSPI clock to DT on Tegra210 and documents the eMMC SKU of
the Jetson Xavier NX board.
* tag 'tegra-for-5.12-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Document Jetson Xavier NX eMMC SKU
Link: https://lore.kernel.org/r/20210129193254.3610492-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/drivers
AT91 SoC for 5.12 #2
- addition of SAMA7G5 identification to soc.c driver
- enhancements to this soc.c driver
* tag 'at91-soc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
drivers: soc: atmel: add spdx license identifier
drivers: soc: atmel: add support for sama7g5
dt-bindings: atmel-sysreg: add "microchip, sama7g5-chipid"
drivers: soc: atmel: add per soc id and version match masks
drivers: soc: atmel: fix "__initconst should be placed after socs[]" warning
drivers: soc: atmel: use GENMASK
drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[]
drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs
Link: https://lore.kernel.org/r/20210129090030.26976-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Properties with standard unit suffixes already have a type and don't need
type definitions. They also default to a single entry, so 'maxItems: 1'
can be dropped.
adi,ad5758 is an oddball which defined an enum of arrays. While a valid
schema, it is simpler as a whole to only define scalar constraints.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org
|
|
Two different SKUs exist for the Jetson Xavier NX module, so document
the compatible strings for both, as well as the developer kits that come
with each of the SKUs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add an entry for the Librem 5 phone, Evergreen revision which is supported
by "r4". Schematics and more information can be found at
https://developer.puri.sm/Librem5/Hardware_Reference/Evergreen.html
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DT binding for SAMA7G5's CHIPID.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/1611318097-8970-7-git-send-email-claudiu.beznea@microchip.com
|
|
The Ericsson U300 platform was one of two ARM929 based SoC platforms for
mobile phones in ST-Ericsson after the merger of Ericsson with ST-NXP
into ST-Ericsson, the other one being the ST Nomadik.
The platform was not widely adopted in Linux based systems and was
replaced with the far superior ST-Ericsson U8500 in 2011, but Linus
Walleij kept maintaining the code for the whole time.
Linus continues to use the Nomadik machine, but decided to drop
u300 from the kernel as part of this year's spring cleaning.
Thanks for having maintained it all these years.
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/lkml/CACRpkdbJkiHR9FSfJTH_5d_qRU1__dRXHM1TL40iqNRKbGQfrQ@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The ZTE ZX set-top-box SoC platform was added in 2015 by Jun Nie, with
Baoyou Xie and Shawn Guo subsequently becoming maintainers after the
addition of the 64-bit variant.
However, the only machines that were ever supported upstream are the
reference designs, not actual set-top-box devices that would benefit
from this support. All ZTE set-top-boxes from the past few years seem
to be based on third-party SoCs. While there is very little information
about zx296702 and zx296718 on the web, I found some references to other
chips from the same family, such as zx296716 and zx296719, which were
never submitted for upstream support. Finally, there is no support for
the GPU on either of them, with the lima and panfrost device drivers
having been added after work on the zx platform had stopped.
Shawn confirmed that he has not seen any interest in this platform for
the past four years, and that it can be removed.
Thanks to Jun and Shawn for maintaining this platform over the past
five years.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The SiRF Prima2 and Atlas platform code was contributed by Cambridge
Silicon Radio (CSR) after aquiring the original SiRF company, and
maintained by Barry Song. CSR was subsequently acquired by Qualcomm,
who no longer have an interest in maintaining the SoC platform but
instead have released more recent SoCs for the same market in the
Snapdragon family.
As Barry is no longer working for the company, nobody else there
wants to maintain it, and there are no third-party users, the
best way forward seems to be to completely remove it.
Thanks to Barry for maintaining the platform for the past ten years.
Cc: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/lkml/c969392572604b98bcb3be44048c3165@hisilicon.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Radxa ROCK Pi E is a router oriented SBC based on Rockchip's RK3328 SoC.
As the official wiki page puts it, "E for Ethernets".
It features the RK3328 SoC, gigabit and fast Ethernet RJ45 ports, both
directly served by Ethernet controllers in the SoC, a USB 3.0 host port,
a power-only USB type-C port, a 3.5mm headphone jack for audio output,
two LEDs, a 40-pin Raspberry Pi style GPIO header, and optional WiFi+BT
and PoE header.
The board comes in multiple configurations, differing in the amount of
onboard RAM, the level of WiFi+BT (none, 802.11n 2.4GHz, or 802.11ac
2.4 GHz & 5 GHz), and whether PoE is supported or not. These variants
can all share the same device tree.
The USB 2.0 OTG controller is available on the 40-pin header. This is
not enabled in the device tree, since it is possible to use it in a
host-only configuration, or in OTG mode with an extra pin from the
header as the ID pin.
The device tree is based on the one of the Rock64, with various parts
modified to match the ROCK Pi E, and some parts updated to newer styles,
such as the gmac2io node's mdio sub-node.
Add a compatible string for the new board.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210117100710.4857-3-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Commit 6ab48105aae7 ("ARM: dts: s3: pinecube: align compatible property
to other S3 boards") changed the pinecube compatible to make it similar
to the other S3 boards we have, but failed to update the bindings
documentation.
Fixes: 6ab48105aae7 ("ARM: dts: s3: pinecube: align compatible property to other S3 boards")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210114113538.1233933-1-maxime@cerno.tech
|
|
Add Kverneland TGO imx6dl based board
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add Kverneland UT1 (imx6dl), UT1Q (imx6q) and UT1P (imx6dp) based boards
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add compatible for Microchip SAMA7G5's shutdown controller.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
