| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 34cb111f8a7b98b5fec809dd194003bca20ef1b2 ]
When resetting the block, the reset line is being driven low and then
high, which means that the line in DTS should be annotated as "active
low".
Fixes: 1877c9fda1b7 ("ASoC: dt-bindings: add dt bindings for wcd9335 audio codec")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221027074652.1044235-2-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d388551b6888f3725e6c957f472526b35161a5b ]
Some non-jedec compliant flashes (like the Everspin flashes) don't have
an ID at all. Hide the attribute in this case.
Fixes: 36ac02286265 ("mtd: spi-nor: add initial sysfs support")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/20220810220654.1297699-2-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c115e7f51e685536ecb885854bdd4b3f225ff3e4 ]
Fix mmc and uart pins after uart splitting.
Some pinmux pins of the mt7986 pinctrl driver is composed of multiple
pinctrl groups, the original binding only allows one pinctrl group
per dts node, this patch sets "maxItems" for these groups and add new
examples to the binding documentation.
Fixes: 65916a1ca90a ("dt-bindings: pinctrl: update bindings for MT7986 SoC")
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221106080114.7426-3-linux@fw-web.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf585ccee22faf469d82727cf375868105b362f7 ]
struct spi_master has been renamed to struct spi_controller. Update the
reference in spi.rst to make it clickable again.
Fixes: 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221101173252.1069294-1-j.neuschaefer@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07b16192f3f01d002d8ff37dcd4372980330ea93 ]
Commit 0adccaf1eac9 ("ASoC: dt-bindings: rt5682: Add #sound-dai-cells")
defined the sound-dai-cells property as 0. However, rt5682 has two DAIs,
AIF1 and AIF2, and therefore should have sound-dai-cells set to 1. Fix
it.
Fixes: 0adccaf1eac9 ("ASoC: dt-bindings: rt5682: Add #sound-dai-cells")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221024220015.1759428-4-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d472cf797c4e268613dbce5ec9b95d0bcae19ecb ]
The simple attribute files do not accept a negative value since the commit
488dac0c9237 ("libfs: fix error cast of negative value in
simple_attr_write()"), so we have to use a 64-bit value to write a
negative value for a debugfs file created by debugfs_create_atomic_t().
This restores the previous behaviour by introducing
DEFINE_DEBUGFS_ATTRIBUTE_SIGNED for a signed value.
Link: https://lkml.kernel.org/r/20220919172418.45257-4-akinobu.mita@gmail.com
Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 727209376f4998bc84db1d5d8af15afea846a92b ]
Commit b041b525dab9 ("x86/split_lock: Make life miserable for split lockers")
changed the way the split lock detector works when in "warn" mode;
basically, it not only shows the warn message, but also intentionally
introduces a slowdown through sleeping plus serialization mechanism
on such task. Based on discussions in [0], seems the warning alone
wasn't enough motivation for userspace developers to fix their
applications.
This slowdown is enough to totally break some proprietary (aka.
unfixable) userspace[1].
Happens that originally the proposal in [0] was to add a new mode
which would warns + slowdown the "split locking" task, keeping the
old warn mode untouched. In the end, that idea was discarded and
the regular/default "warn" mode now slows down the applications. This
is quite aggressive with regards proprietary/legacy programs that
basically are unable to properly run in kernel with this change.
While it is understandable that a malicious application could DoS
by split locking, it seems unacceptable to regress old/proprietary
userspace programs through a default configuration that previously
worked. An example of such breakage was reported in [1].
Add a sysctl to allow controlling the "misery mode" behavior, as per
Thomas suggestion on [2]. This way, users running legacy and/or
proprietary software are allowed to still execute them with a decent
performance while still observing the warning messages on kernel log.
[0] https://lore.kernel.org/lkml/20220217012721.9694-1-tony.luck@intel.com/
[1] https://github.com/doitsujin/dxvk/issues/2938
[2] https://lore.kernel.org/lkml/87pmf4bter.ffs@tglx/
[ dhansen: minor changelog tweaks, including clarifying the actual
problem ]
Fixes: b041b525dab9 ("x86/split_lock: Make life miserable for split lockers")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Andre Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/all/20221024200254.635256-1-gpiccoli%40igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a62d196e89887c029d5aef409135f9a2a8667268 ]
corePWM is capable of inverted operation but the binding requires
\#pwm-cells of 2. Expand the binding to support setting the polarity.
Fixes: df77f7735786 ("dt-bindings: pwm: add microchip corepwm binding")
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5adedd42245af0860ebda8fe0949f24f5204c1b1 upstream.
Commit cd3bc044af48 ("KEYS: encrypted: Instantiate key with
user-provided decrypted data") added key instantiation with user
provided decrypted data. The user data is hex-ascii-encoded but was
just memcpy'ed to the binary buffer. Fix this to use hex2bin instead.
Old keys created from user provided decrypted data saved with "keyctl
pipe" are still valid, however if the key is recreated from decrypted
data the old key must be converted to the correct format. This can be
done with a small shell script, e.g.:
BROKENKEY=abcdefABCDEF1234567890aaaaaaaaaa
NEWKEY=$(echo -ne $BROKENKEY | xxd -p -c32)
keyctl add user masterkey "$(cat masterkey.bin)" @u
keyctl add encrypted testkey "new user:masterkey 32 $NEWKEY" @u
However, NEWKEY is still broken: If for BROKENKEY 32 bytes were
specified, a brute force attacker knowing the key properties would only
need to try at most 2^(16*8) keys, as if the key was only 16 bytes long.
The security issue is a result of the combination of limiting the input
range to hex-ascii and using memcpy() instead of hex2bin(). It could
have been fixed either by allowing binary input or using hex2bin() (and
doubling the ascii input key length). This patch implements the latter.
The corresponding test for the Linux Test Project ltp has also been
fixed (see link below).
Fixes: cd3bc044af48 ("KEYS: encrypted: Instantiate key with user-provided decrypted data")
Cc: stable@kernel.org
Link: https://lore.kernel.org/ltp/20221006081709.92303897@mail.steuer-voss.de/
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Nikolaus Voss <nikolaus.voss@haag-streit.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Export smp_send_reschedule() for modules use, fix a huge page entry
update issue, and add documents for booting description"
* tag 'loongarch-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
docs/zh_CN: Add LoongArch booting description's translation
docs/LoongArch: Add booting description
LoongArch: mm: Fix huge page entry update for virtual machine
LoongArch: Export symbol for function smp_send_reschedule()
|
|
Translate ../loongarch/booting.rst into Chinese.
Suggested-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
1, Describe the information passed from BootLoader to kernel.
2, Describe the meaning and values of the kernel image header field.
Suggested-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Pull kvm fixes from Paolo Bonzini:
"Unless anything comes from the ARM side, this should be the last pull
request for this release - and it's mostly documentation:
- Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns
- s390: fix multi-epoch extension in nested guests
- x86: fix uninitialized variable on nested triple fault"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns
KVM: Move halt-polling documentation into common directory
KVM: x86: fix uninitialized variable use on KVM_REQ_TRIPLE_FAULT
KVM: s390: vsie: Fix the initialization of the epoch extension (epdx) field
|
|
Clarify the existing documentation about how KVM_CAP_HALT_POLL and
halt_poll_ns interact to make it clear that VMs using KVM_CAP_HALT_POLL
ignore halt_poll_ns.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221201195249.3369720-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move halt-polling.rst into the common KVM documentation directory and
out of the x86-specific directory. Halt-polling is a common feature and
the existing documentation is already written as such.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221201195249.3369720-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A set of clk driver fixes that resolve issues for various SoCs.
Most of these are incorrect clk data, like bad parent descriptions.
When the clk tree is improperly described things don't work, like USB
and UFS controllers, because clk frequencies are wonky. Here are the
extra details:
- Fix the parent of UFS reference clks on Qualcomm SC8280XP so that
UFS works properly
- Fix the clk ID for USB on AT91 RM9200 so the USB driver continues
to probe
- Stop using of_device_get_match_data() on the wrong device for a
Samsung Exynos driver so it gets the proper clk data
- Fix ExynosAutov9 binding
- Fix the parent of the div4 clk on Exynos7885
- Stop calling runtime PM APIs from the Qualcomm GDSC driver directly
as it leads to a lockdep splat and is just plain wrong because it
violates runtime PM semantics by calling runtime PM APIs when the
device has been runtime PM disabled"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sc8280xp: add cxo as parent for three ufs ref clks
ARM: at91: rm9200: fix usb device clock id
clk: samsung: Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()"
dt-bindings: clock: exynosautov9: fix reference to CMU_FSYS1
clk: qcom: gdsc: Remove direct runtime PM calls
clk: samsung: exynos7885: Correct "div4" clock parents
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 6.1-rc7, they include:
- build warning fix for the vdso when using new versions of grep
- iio driver fixes for reported issues
- small nvmem driver fixes
- fpga Kconfig fix
- interconnect dt binding fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lib/vdso: use "grep -E" instead of "egrep"
nvmem: lan9662-otp: Change return type of lan9662_otp_wait_flag_clear()
nvmem: rmem: Fix return value check in rmem_read()
fpga: m10bmc-sec: Fix kconfig dependencies
dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
iio: adc: aspeed: Remove the trim valid dts property.
iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
iio: light: rpr0521: add missing Kconfig dependencies
iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
iio: health: afe4403: Fix oob read in afe4403_read_raw
iio: light: apds9960: fix wrong register for gesture gain
dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert a recent change in the schedutil cpufreq governor that
had not been expected to make any functional difference, but turned
out to introduce a performance regression, fix an initialization issue
in the amd-pstate driver and make it actually replace the venerable
ACPI cpufreq driver on the supported systems by default.
Specifics:
- Revert a recent schedutil cpufreq governor change that introduced a
performace regression on Pixel 6 (Sam Wu)
- Fix amd-pstate driver initialization after running the kernel via
kexec (Wyes Karny)
- Turn amd-pstate into a built-in driver which allows it to take
precedence over acpi-cpufreq by default on supported systems and
amend it with a mechanism to disable this behavior (Perry Yuan)
- Update amd-pstate documentation in accordance with the other
changes made to it (Perry Yuan)"
* tag 'pm-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: add amd-pstate kernel command line options
Documentation: amd-pstate: add driver working mode introduction
cpufreq: amd-pstate: add amd-pstate driver parameter for mode selection
cpufreq: amd-pstate: change amd-pstate driver to be built-in type
cpufreq: amd-pstate: cpufreq: amd-pstate: reset MSR_AMD_PERF_CTL register at init
Revert "cpufreq: schedutil: Move max CPU capacity to sugov_policy"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter and xfrm.
Current release - regressions:
- dccp/tcp: fix bhash2 issues related to WARN_ON() in
inet_csk_get_port()
- l2tp: don't sleep and disable BH under writer-side sk_callback_lock
- eth: ice: fix handling of burst tx timestamps
Current release - new code bugs:
- xfrm: squelch kernel warning in case XFRM encap type is not
available
- eth: mlx5e: fix possible race condition in macsec extended packet
number update routine
Previous releases - regressions:
- neigh: decrement the family specific qlen
- netfilter: fix ipset regression
- rxrpc: fix race between conn bundle lookup and bundle removal
[ZDI-CAN-15975]
- eth: iavf: do not restart tx queues after reset task failure
- eth: nfp: add port from netdev validation for EEPROM access
- eth: mtk_eth_soc: fix potential memory leak in mtk_rx_alloc()
Previous releases - always broken:
- tipc: set con sock in tipc_conn_alloc
- nfc:
- fix potential memory leaks
- fix incorrect sizing calculations in EVT_TRANSACTION
- eth: octeontx2-af: fix pci device refcount leak
- eth: bonding: fix ICMPv6 header handling when receiving IPv6
messages
- eth: prestera: add missing unregister_netdev() in
prestera_port_create()
- eth: tsnep: fix rotten packets
Misc:
- usb: qmi_wwan: add support for LARA-L6"
* tag 'net-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: thunderx: Fix the ACPI memory leak
octeontx2-af: Fix reference count issue in rvu_sdp_init()
net: altera_tse: release phylink resources in tse_shutdown()
virtio_net: Fix probe failed when modprobe virtio_net
net: wwan: t7xx: Fix the ACPI memory leak
octeontx2-pf: Add check for devm_kcalloc
net: enetc: preserve TX ring priority across reconfiguration
net: marvell: prestera: add missing unregister_netdev() in prestera_port_create()
nfc: st-nci: fix incorrect sizing calculations in EVT_TRANSACTION
nfc: st-nci: fix memory leaks in EVT_TRANSACTION
nfc: st-nci: fix incorrect validating logic in EVT_TRANSACTION
Documentation: networking: Update generic_netlink_howto URL
net/cdc_ncm: Fix multicast RX support for CDC NCM devices with ZLP
net: usb: qmi_wwan: add u-blox 0x1342 composition
l2tp: Don't sleep and disable BH under writer-side sk_callback_lock
net: dm9051: Fix missing dev_kfree_skb() in dm9051_loop_rx()
arcnet: fix potential memory leak in com20020_probe()
ipv4: Fix error return code in fib_table_insert()
net: ethernet: mtk_eth_soc: fix memory leak in error path
net: ethernet: mtk_eth_soc: fix resource leak in error path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a bunch of late fixes that just came in, in particular a
longer series for Rockchips devicetree files, but most of those just
address cosmetic errors that were found during the binding validation.
There are a couple of code changes:
- A regression fix to the IXP42x PCI bus
- A fix for a memory leak on optee, and another one for mach-mxs
- Two fixes for the sunxi rsb bus driver, to address problems with
the shutdown logic
The rest are small but important devicetree fixes for a number of
individual boards, addressing issues across all platforms:
- arm global timer on older rockchip SoCs is unstable and needs to be
disabled in favor of a more reliable clocksource
- Corrections to fix bluetooth, mmc, and networking on a few Rockchip
boards
- at91/sam9g20ek UDC needs a pin controller config change
- an omap board runs into mmc probe errors because of regulator nodes
in the wrong place
- imx8mp-evk has a minor inaccuracy with its pin config, but without
user visible impact
- The Allwinner H6 Hantro G2 video decoder needs an IOMMU reference
to prevent the driver from crashing"
* tag 'soc-fixes-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
bus: ixp4xx: Don't touch bit 7 on IXP42x
ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency properties
arm64: dts: imx8mp-evk: correct pcie pad settings
ARM: mxs: fix memory leak in mxs_machine_init()
ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl
tee: optee: fix possible memory leak in optee_register_device()
arm64: dts: allwinner: h6: Add IOMMU reference to Hantro G2
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
bus: sunxi-rsb: Support atomic transfers
bus: sunxi-rsb: Remove the shutdown callback
ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
arm64: dts: rockchip: Fix Pine64 Quartz4-B PMIC interrupt
ARM: dts: am335x-pcm-953: Define fixed regulators in root node
ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name
arm64: dts: rockchip: fix ir-receiver node names
ARM: dts: rockchip: fix ir-receiver node names
arm64: dts: rockchip: fix adc-keys sub node names
ARM: dts: rockchip: fix adc-keys sub node names
arm: dts: rockchip: remove clock-frequency from rtc
arm: dts: rockchip: fix node name for hym8563 rtc
...
|
|
The documentation refers to invalid web page under www.linuxfoundation.org
The patch refers to a working URL under wiki.linuxfoundation.org
Signed-off-by: Nir Levy <bhr166@gmail.com>
Link: https://lore.kernel.org/all/20221120220630.7443-1-bhr166@gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Chinese translation of FPRs Note is not consistent with the original
English version, $v0/$v1 should be $fv0/$fv1, $a0/$a1 should be $fa0/$fa1,
fix them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add a new amd pstate driver command line option to enable driver passive
working mode via MSR and shared memory interface to request desired
performance within abstract scale and the power management firmware
(SMU) convert the perf requests into actual hardware pstates.
Also the `disable` parameter can disable the pstate driver loading by
adding `amd_pstate=disable` to kernel command line.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce the `amd_pstate` driver new working mode with
`amd_pstate=passive` added to kernel command line.
If there is no passive mode enabled by user, amd_pstate driver will be
disabled by default for now.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fix for v6.1-rc
This contains a tiny fix to align the driver compatible string in the
binding documentation with the one used in DTS.
- dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
"3rd set of IIO fixes for the 6.1 cycle.
Usual mixed bunch of driver fixes.
* sw-triggers
- Fix failure to cleanup up list registration in an error path.
* aspeed,adc
- Drop the trim valid dts property as it doesn't account for unprogrammed
OTP and that can be easily detected without it.
* avago,apds9960:
- Fix register address for gesture gain.
* bosch,bma400
- Fix a memory leak in an error path.
* rohm,rpr0521
- Fix missing dependency on IIO_BUFFER/IIO_TRIGGERED_BUFFER.
* ti,afe4403/4404
- Fix out of band read by moving reads down to where they are
used."
* tag 'iio-fixes-for-6.1c' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
iio: adc: aspeed: Remove the trim valid dts property.
iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
iio: light: rpr0521: add missing Kconfig dependencies
iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
iio: health: afe4403: Fix oob read in afe4403_read_raw
iio: light: apds9960: fix wrong register for gesture gain
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
- RSB bus communication fixes
- missing IOMMU reference property to H6 Hantro G2
* tag 'sunxi-fixes-for-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Add IOMMU reference to Hantro G2
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
bus: sunxi-rsb: Support atomic transfers
bus: sunxi-rsb: Remove the shutdown callback
Link: https://lore.kernel.org/r/Y3ftpBFk5+fndA4B@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for 8042 to stop leaking platform device on unload
- a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we
need to reset controller to load config from firmware
- a workaround for Acer Switch to avoid interrupt storm from home and
power buttons
- a workaround for more ASUS ZenBook models to detect keyboard
controller
- a fix for iforce driver to properly handle communication errors
- touchpad on HP Laptop 15-da3001TU switched to RMI mode
* tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - fix leaking of platform device on module removal
Input: i8042 - apply probe defer to more ASUS ZenBook models
Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[]
Input: soc_button_array - add use_low_level_irq module parameter
Input: iforce - invert valid length check when fetching device IDs
Input: goodix - try resetting the controller when no config is set
dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip
Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are a number of small tty and serial driver fixes for 6.1-rc6.
They all resolve reported problems:
- kernel doc build problems with the -rc1 serial driver documentation
update
- n_gsm reported problems
- imx serial driver missing callback
- lots of tiny 8250 driver fixes for reported issues.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
docs/driver-api/miscellaneous: Remove kernel-doc of serial_core.c
serial: 8250: Flush DMA Rx on RLSI
serial: 8250_lpss: Use 16B DMA burst with Elkhart Lake
serial: 8250_lpss: Configure DMA also w/o DMA filter
serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs
tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send
Revert "tty: n_gsm: replace kicktimer with delayed_work"
Revert "tty: n_gsm: avoid call of sleeping functions from atomic context"
serial: imx: Add missing .thaw_noirq hook
tty: serial: fsl_lpuart: don't break the on-going transfer when global reset
serial: 8250: omap: Flush PM QOS work on remove
serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove()
serial: 8250_omap: remove wait loop from Errata i202 workaround
serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl()
serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other driver fixes for 6.1-rc6 to
resolve some reported problems. Included in here are:
- iio driver fixes
- binder driver fix
- nvmem driver fix
- vme_vmci information leak fix
- parport fix
- slimbus configuration fix
- coreboot firmware bugfix
- speakup build fix and crash fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
firmware: coreboot: Register bus in module init
nvmem: u-boot-env: fix crc32_data_offset on redundant u-boot-env
slimbus: qcom-ngd: Fix build error when CONFIG_SLIM_QCOM_NGD_CTRL=y && CONFIG_QCOM_RPROC_COMMON=m
docs: update mediator contact information in CoC doc
slimbus: stream: correct presence rate frequencies
nvmem: lan9662-otp: Fix compatible string
binder: validate alloc->mm in ->mmap() handler
parport_pc: Avoid FIFO port location truncation
siox: fix possible memory leak in siox_device_add()
misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram()
speakup: replace utils' u_char with unsigned char
speakup: fix a segfault caused by switching consoles
tools: iio: iio_generic_buffer: Fix read size
iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler()
iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()
iio: adc: mp2629: fix potential array out of bound access
iio: adc: mp2629: fix wrong comparison of channel
iio: pressure: ms5611: changed hardcoded SPI speed to value limited
iio: pressure: ms5611: fixed value compensation bug
iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A fair amount of commits at this time due to ASoC PR merge, but all
look small and easy, mostly device-specific fixes spanned in various
drivers. Hopefully this should be the last big chunk for 6.1"
* tag 'sound-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/realtek: fix speakers for Samsung Galaxy Book Pro
ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()
ASoC: stm32: dfsdm: manage cb buffers cleanup
ASoC: sof_es8336: reduce pop noise on speaker
ASoC: SOF: topology: No need to assign core ID if token parsing failed
ASoC: soc-utils: Remove __exit for snd_soc_util_exit()
ASoC: rt5677: fix legacy dai naming
ASoC: rt5514: fix legacy dai naming
ASoC: SOF: ipc3-topology: use old pipeline teardown flow with SOF2.1 and older
ASoC: hda: intel-dsp-config: add ES83x6 quirk for IceLake
ASoC: Intel: soc-acpi: add ES83x6 support to IceLake
ASoC: tas2780: Fix set_tdm_slot in case of single slot
ASoC: tas2764: Fix set_tdm_slot in case of single slot
ASoC: tas2770: Fix set_tdm_slot in case of single slot
ASoC: fsl_asrc fsl_esai fsl_sai: allow CONFIG_PM=N
ASoC: core: Fix use-after-free in snd_soc_exit()
MAINTAINERS: update Tzung-Bi's email address
ASoC: Intel: bytcht_es8316: Add quirk for the Nanote UMPC-01
ASoC: amd: yc: Add Alienware m17 R5 AMD into DMI table
...
|
|
The Hantro G2 video decoder block sits behind an IOMMU. The device tree
binding needs a property to reference it. Without a reference for the
implementation to properly configure the IOMMU, it will fault and cause
the video decoder to fail.
Add an "iommus" property for referring to the IOMMU port. The master ID
in the example is taken from the IOMMU fault error message on Linux,
and the number seems to match the order in the user manual's IOMMU
diagram.
Fixes: fd6be12716c4 ("media: dt-bindings: allwinner: document H6 Hantro G2 binding")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221115090644.3602573-2-wenst@chromium.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
If the property is set on a device without valid trimming data in the OTP
the ADC will not function correctly. Therefore, this patch drops the use
of this property to avoid this scenario.
Fixes: 2bdb2f00a895 ("dt-bindings: iio: adc: Add ast2600-adc bindings")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221114025057.10843-2-billy_tsai@aspeedtech.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes.
Eight are cc:stable and the remainder address issues which were
introduced post-6.0 or which aren't considered serious enough to
justify a -stable backport"
* tag 'mm-hotfixes-stable-2022-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
docs: kmsan: fix formatting of "Example report"
mm/damon/dbgfs: check if rm_contexts input is for a real context
maple_tree: don't set a new maximum on the node when not reusing nodes
maple_tree: fix depth tracking in maple_state
arch/x86/mm/hugetlbpage.c: pud_huge() returns 0 when using 2-level paging
fs: fix leaked psi pressure state
nilfs2: fix use-after-free bug of ns_writer on remount
x86/traps: avoid KMSAN bugs originating from handle_bug()
kmsan: make sure PREEMPT_RT is off
Kconfig.debug: ensure early check for KMSAN in CONFIG_KMSAN_WARN
x86/uaccess: instrument copy_from_user_nmi()
kmsan: core: kmsan_in_runtime() should return true in NMI context
mm: hugetlb_vmemmap: include missing linux/moduleparam.h
mm/shmem: use page_mapping() to detect page cache for uffd continue
mm/memremap.c: map FS_DAX device memory as decrypted
Partly revert "mm/thp: carry over dirty bit when thp splits on pmd"
nilfs2: fix deadlock in nilfs_count_free_blocks()
mm/mmap: fix memory leak in mmap_region()
hugetlbfs: don't delete error page from pagecache
maple_tree: reorganize testing to restore module testing
...
|
|
Pull kvm
"This is a pretty large diffstat for this time of the release. The main
culprit is a reorganization of the AMD assembly trampoline, allowing
percpu variables to be accessed early.
This is needed for the return stack depth tracking retbleed mitigation
that will be in 6.2, but it also makes it possible to tighten the IBRS
restore on vmexit. The latter change is a long tail of the
spectrev2/retbleed patches (the corresponding Intel change was simpler
and went in already last June), which is why I am including it right
now instead of sharing a topic branch with tip.
Being assembly and being rich in comments makes the line count balloon
a bit, but I am pretty confident in the change (famous last words)
because the reorganization actually makes everything simpler and more
understandable than before. It has also had external review and has
been tested on the aforementioned 6.2 changes, which explode quite
brutally without the fix.
Apart from this, things are pretty normal.
s390:
- PCI fix
- PV clock fix
x86:
- Fix clash between PMU MSRs and other MSRs
- Prepare SVM assembly trampoline for 6.2 retbleed mitigation and
for...
- ... tightening IBRS restore on vmexit, moving it before the first
RET or indirect branch
- Fix log level for VMSA dump
- Block all page faults during kvm_zap_gfn_range()
Tools:
- kvm_stat: fix incorrect detection of debugfs
- kvm_stat: update vmexit definitions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Block all page faults during kvm_zap_gfn_range()
KVM: x86/pmu: Limit the maximum number of supported AMD GP counters
KVM: x86/pmu: Limit the maximum number of supported Intel GP counters
KVM: x86/pmu: Do not speculatively query Intel GP PMCs that don't exist yet
KVM: SVM: Only dump VMSA to klog at KERN_DEBUG level
tools/kvm_stat: update exit reasons for vmx/svm/aarch64/userspace
tools/kvm_stat: fix incorrect detection of debugfs
x86, KVM: remove unnecessary argument to x86_virt_spec_ctrl and callers
KVM: SVM: move MSR_IA32_SPEC_CTRL save/restore to assembly
KVM: SVM: restore host save area from assembly
KVM: SVM: move guest vmsave/vmload back to assembly
KVM: SVM: do not allocate struct svm_cpu_data dynamically
KVM: SVM: remove dead field from struct svm_cpu_data
KVM: SVM: remove unused field from struct vcpu_svm
KVM: SVM: retrieve VMCB from assembly
KVM: SVM: adjust register allocation for __svm_vcpu_run()
KVM: SVM: replace regs argument of __svm_vcpu_run() with vcpu_svm
KVM: x86: use a separate asm-offsets.c file
KVM: s390: pci: Fix allocation size of aift kzdev elements
KVM: s390: pv: don't allow userspace to set the clock under PV
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi, can and bpf.
Current release - new code bugs:
- can: af_can: can_exit(): add missing dev_remove_pack() of
canxl_packet
Previous releases - regressions:
- bpf, sockmap: fix the sk->sk_forward_alloc warning
- wifi: mac80211: fix general-protection-fault in
ieee80211_subif_start_xmit()
- can: af_can: fix NULL pointer dereference in can_rx_register()
- can: dev: fix skb drop check, avoid o-o-b access
- nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
Previous releases - always broken:
- bpf: fix wrong reg type conversion in release_reference()
- gso: fix panic on frag_list with mixed head alloc types
- wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()
- wifi: mac80211: set TWT Information Frame Disabled bit as 1
- eth: macsec offload related fixes, make sure to clear the keys from
memory
- tun: fix memory leaks in the use of napi_get_frags
- tun: call napi_schedule_prep() to ensure we own a napi
- tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
- ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
network
- tipc: fix a msg->req tlv length check
- sctp: clear out_curr if all frag chunks of current msg are pruned,
avoid list corruption
- mctp: fix an error handling path in mctp_init(), avoid leaks"
* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
MAINTAINERS: Move Vivien to CREDITS
net: macvlan: fix memory leaks of macvlan_common_newlink
ethernet: tundra: free irq when alloc ring failed in tsi108_open()
net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
ethernet: s2io: disable napi when start nic failed in s2io_card_up()
net: atlantic: macsec: clear encryption keys from the stack
net: phy: mscc: macsec: clear encryption keys when freeing a flow
stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
mctp: Fix an error handling path in mctp_init()
stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
net: cpsw: disable napi in cpsw_ndo_open()
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
...
|
|
Update mediator contact information in CoC interpretation document.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221011171417.34286-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
"I apparently had missed tagging and sending this set of changes out
during the 6.1 merge window. But did get the associated dts changes
depending on this merged. The result is a regression in 6.1-rc on the
affected, older, Qualcomm platforms - in for form of them not booting.
So while these weren't regression fixes originally, they are now. It's
not introducing new beahavior, but simply extending the existing new
Devicetree model, to cover remaining platforms:
- extend the DeviceTree binding and implementation for the Qualcomm
hardware spinlock on some older platforms to follow the style of
the newer ones where the DeviceTree representation does not rely on
an intermediate syscon node"
* tag 'hwlock-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
dt-bindings: hwlock: qcom-hwspinlock: add syscon to MSM8974
hwspinlock: qcom: add support for MMIO on older SoCs
hwspinlock: qcom: correct MMIO max register for newer SoCs
dt-bindings: hwlock: qcom-hwspinlock: correct example indentation
dt-bindings: hwlock: qcom-hwspinlock: add support for MMIO on older SoCs
|
|
Since merge of tty-6.0-rc1, "make htmldocs" with Sphinx >=3.1 emits
a bunch of warnings indicating duplicate kernel-doc comments from
drivers/tty/serial/serial_core.c.
This is due to the kernel-doc directive for serial_core.c in
serial/drivers.rst added in the merge. It conflicts with an existing
kernel-doc directive in miscellaneous.rst.
Remove the latter directive and resolve the duplicates.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Fixes: 607ca0f742b7 ("Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty")
Cc: stable@vger.kernel.org # 6.0
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/4e54c76a-138a-07e0-985a-dd83cb622208@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a blank line to make the sentence before the list render as a separate
paragraph, not a definition.
Link: https://lkml.kernel.org/r/20221107142255.4038811-1-glider@google.com
Fixes: 93858ae70cf4 ("kmsan: add ReST documentation")
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While working on the nvmem description I figured out this file had the
"nvmem-cell-names" property name misspelled. Fix the typo, as
"nvmem-cells-names" has never existed.
Fixes: 603094b2cdb7 ("dt-bindings: net: Add tsnep Ethernet controller")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221104162147.1288230-1-miquel.raynal@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix reference to CMU_FSYS1 mmc card clock to gout clock instead of dout.
"gout" is output of a gate clock. Unlike any other clocks, the fsys1
mmc top clock does not have a divider, so it should be "mout -> gout"
instead of "mout -> gout -> dout".
This fixes make dtbs_check warning as shown below:
arch/arm64/boot/dts/exynos/exynosautov9-sadk.dtb: clock-controller@17040000:
clock-names:2: 'dout_clkcmu_fsys1_mmc_card' was expected
Fixes: 4b6ec8d88623 ("dt-bindings: clock: exynosautov9: add schema for cmu_fsys0/1")
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Inbaraj E <inbaraj.e@samsung.com>
Link: https://lore.kernel.org/r/20221107124337.114135-1-inbaraj.e@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
When running under PV, the guest's TOD clock is under control of the
ultravisor and the hypervisor isn't allowed to change it. Hence, don't
allow userspace to change the guest's TOD clock by returning
-EOPNOTSUPP.
When userspace changes the guest's TOD clock, KVM updates its
kvm.arch.epoch field and, in addition, the epoch field in all state
descriptions of all VCPUs.
But, under PV, the ultravisor will ignore the epoch field in the state
description and simply overwrite it on next SIE exit with the actual
guest epoch. This leads to KVM having an incorrect view of the guest's
TOD clock: it has updated its internal kvm.arch.epoch field, but the
ultravisor ignores the field in the state description.
Whenever a guest is now waiting for a clock comparator, KVM will
incorrectly calculate the time when the guest should wake up, possibly
causing the guest to sleep for much longer than expected.
With this change, kvm_s390_set_tod() will now take the kvm->lock to be
able to call kvm_s390_pv_is_protected(). Since kvm_s390_set_tod_clock()
also takes kvm->lock, use __kvm_s390_set_tod_clock() instead.
The function kvm_s390_set_tod_clock is now unused, hence remove it.
Update the documentation to indicate the TOD clock attr calls can now
return -EOPNOTSUPP.
Fixes: 0f3035047140 ("KVM: s390: protvirt: Do only reset registers that are accessible")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20221011160712.928239-2-nrb@linux.ibm.com
Message-Id: <20221011160712.928239-2-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use POSIX-compatible grep options
- Document git-related tips for reproducible builds
- Fix a typo in the modpost rule
- Suppress SIGPIPE error message from gcc-ar and llvm-ar
- Fix segmentation fault in the menuconfig search
* tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix segmentation fault in menuconfig search
kbuild: fix SIGPIPE error message for AR=gcc-ar and AR=llvm-ar
kbuild: fix typo in modpost
Documentation: kbuild: Add description of git for reproducible builds
kbuild: use POSIX-compatible grep option
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the pKVM stage-1 walker erronously using the stage-2 accessor
- Correctly convert vcpu->kvm to a hyp pointer when generating an
exception in a nVHE+MTE configuration
- Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
- Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
- Document the boot requirements for FGT when entering the kernel at
EL1
x86:
- Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
- Make argument order consistent for kvcalloc()
- Userspace API fixes for DEBUGCTL and LBRs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix a typo about the usage of kvcalloc()
KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTL
KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl()
KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRs
arm64: booting: Document our requirements for fine grained traps with SME
KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling them
KVM: arm64: Fix bad dereference on MTE-enabled systems
KVM: arm64: Use correct accessor to parse stage-1 PTEs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
* Fix the pKVM stage-1 walker erronously using the stage-2 accessor
* Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
* Document the boot requirements for FGT when entering the kernel
at EL1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Avoid kprobe recursion when cortex_a76_erratum_1463225_debug_handler()
is not inlined (change to __always_inline).
- Fix the visibility of compat hwcaps, broken by recent changes to
consolidate the visibility of hwcaps and the user-space view of the
ID registers.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpufeature: Fix the visibility of compat hwcaps
arm64: entry: avoid kprobe recursion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A documentation fix and driver fixes for piix4, tegra, and i801"
* tag 'i2c-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Documentation: devres: add missing I2C helper
i2c: i801: add lis3lv02d's I2C address for Vostro 5568
i2c: tegra: Allocate DMA memory for DMA engine
i2c: piix4: Fix adapter not be removed in piix4_remove()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are not a lot of important fixes for the soc tree yet this time,
but it's time to upstream what I got so far:
- DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical
temperature points
- A number of fixes for the Arm SCMI firmware, addressing correctness
issues in the code, in particular error handling and resource
leaks.
- One error handling fix for the new i.MX93 power domain driver
- Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips,
fixing incorrect or missing DT properties for MDIO controller
nodes, CPLD, USB and regulators for various boards, as well as some
fixes for DT schema checks.
- MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git
URLs"
* tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
arm64: dts: juno: Add thermal critical trip points
firmware: arm_scmi: Fix deferred_tx_wq release on error paths
firmware: arm_scmi: Fix devres allocation device in virtio transport
firmware: arm_scmi: Make Rx chan_setup fail on memory errors
firmware: arm_scmi: Make tx_prepare time out eventually
firmware: arm_scmi: Suppress the driver's bind attributes
firmware: arm_scmi: Cleanup the core driver removal callback
MAINTAINERS: Update HiSilicon LPC BUS Driver maintainer
ARM: dts: ux500: Add trips to battery thermal zones
arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
arm64: dts: imx93: correct gpio-ranges
arm64: dts: imx93: correct s4mu interrupt names
dt-bindings: power: gpcv2: add power-domains property
arm64: dts: imx8: correct clock order
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
arm64: dts: imx8mn: Correct the usb power domain
...
|
|
Commit 237405ebef58 ("arm64: cpufeature: Force HWCAP to be based on the
sysreg visible to user-space") forced the hwcaps to use sanitised
user-space view of the id registers. However, the ID register structures
used to select few compat cpufeatures (vfp, crc32, ...) are masked and
hence such hwcaps do not appear in /proc/cpuinfo anymore for PER_LINUX32
personality.
Add the ID register structures explicitly and set the relevant entry as
visible. As these ID registers are now of type visible so make them
available in 64-bit userspace by making necessary changes in register
emulation logic and documentation.
While at it, update the comment for structure ftr_generic_32bits[] which
lists the ID register that use it.
Fixes: 237405ebef58 ("arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space")
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20221103082232.19189-1-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
