| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching fix from Petr Mladek:
"Workaround for 'unreachable instruction' objtool warnings that happen
with some compiler versions"
* tag 'livepatching-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
Revert "kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled"
|
|
|
|
Use of the new -flive-patching flag was introduced with the following
commit:
43bd3a95c98e ("kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled")
This flag has several drawbacks:
- It disables some optimizations, so it can have a negative effect on
performance.
- According to the GCC documentation it's not compatible with LTO, which
will become a compatibility issue as LTO support gets upstreamed in
the kernel.
- It was intended to be used for source-based patch generation tooling,
as opposed to binary-based patch generation tooling (e.g.,
kpatch-build). It probably should have at least been behind a
separate config option so as not to negatively affect other livepatch
users.
- Clang doesn't have the flag, so as far as I can tell, this method of
generating patches is incompatible with Clang, which like LTO is
becoming more mainstream.
- It breaks GCC's implicit noreturn detection for local functions. This
is the cause of several "unreachable instruction" objtool warnings.
- The broken noreturn detection is an obvious GCC regression, but we
haven't yet gotten GCC developers to acknowledge that, which doesn't
inspire confidence in their willingness to keep the feature working as
optimizations are added or changed going forward.
- While there *is* a distro which relies on this flag for their distro
livepatch module builds, there's not a publicly documented way to
create safe livepatch modules with it. Its use seems to be based on
tribal knowledge. It serves no benefit to those who don't know how to
use it.
(In fact, I believe the current livepatch documentation and samples
are misleading and dangerous, and should be corrected. Or at least
amended with a disclaimer. But I don't feel qualified to make such
changes.)
Also, we have an idea for using objtool to detect function changes,
which could potentially obsolete the need for this flag anyway.
At this point the flag has no benefits for upstream which would
counteract the above drawbacks. Revert it until it becomes more ready.
This reverts commit 43bd3a95c98e1a86b8b55d97f745c224ecff02b9.
Fixes: 43bd3a95c98e ("kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/696262e997359666afa053fe7d1a9fb2bb373964.1595010490.git.jpoimboe@redhat.com
|
|
|
|
|
|
The '%' in filter/filter-out matches to any number of any characters,
including empty string.
So, '%config' matches to 'config', and '%install' to 'install'.
Drop the redundant patterns.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
|
|
Recently 0day reported many strange performance changes (regression or
improvement), in which there was no obvious relation between the culprit
commit and the benchmark at the first look, and it causes people to doubt
the test itself is wrong.
Upon further check, many of these cases are caused by the change to the
alignment of kernel text or data, as whole text/data of kernel are linked
together, change in one domain may affect alignments of other domains.
gcc has an option '-falign-functions=n' to force text aligned, and with
that option enabled, some of those performance changes will be gone, like
[1][2][3].
Add this option so that developers and 0day can easily find performance
bump caused by text alignment change, as tracking these strange bump is
quite time consuming. Though it can't help in other cases like data
alignment changes like [4].
Following is some size data for v5.7 kernel built with a RHEL config used
in 0day:
text data bss dec filename
19738771 13292906 5554236 38585913 vmlinux.noalign
19758591 13297002 5529660 38585253 vmlinux.align32
Raw vmlinux size in bytes:
v5.7 v5.7+align32
253950832 254018000 +0.02%
Some benchmark data, most of them have no big change:
* hackbench: [ -1.8%, +0.5%]
* fsmark: [ -3.2%, +3.4%] # ext4/xfs/btrfs
* kbuild: [ -2.0%, +0.9%]
* will-it-scale: [ -0.5%, +1.8%] # mmap1/pagefault3
* netperf:
- TCP_CRR [+16.6%, +97.4%]
- TCP_RR [-18.5%, -1.8%]
- TCP_STREAM [ -1.1%, +1.9%]
[1] https://lore.kernel.org/lkml/20200114085637.GA29297@shao2-debian/
[2] https://lore.kernel.org/lkml/20200330011254.GA14393@feng-iot/
[3] https://lore.kernel.org/lkml/1d98d1f0-fe84-6df7-f5bd-f4cb2cdb7f45@intel.com/
[4] https://lore.kernel.org/lkml/20200205123216.GO12867@shao2-debian/
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: http://lkml.kernel.org/r/1595475001-90945-1-git-send-email-feng.tang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
|
|
Commit d26e94149276 ("kbuild: no gcc-plugins during cc-option tests")
was neeeded because scripts/Makefile.gcc-plugins was too early.
This is unneeded by including scripts/Makefile.gcc-plugins last,
and being careful to not add cc-option tests after it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently, the top Makefile includes all of scripts/Makefile.<feature>
even if the associated CONFIG option is disabled.
Do not include unneeded Makefiles in order to slightly optimize the
parse stage.
Include $(include-y), and ignore $(include-).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When you clean the build tree for ARCH=arm, you may see the following
error message from 'nm' command:
$ make -j24 ARCH=arm clean
CLEAN arch/arm/crypto
CLEAN arch/arm/kernel
CLEAN arch/arm/mach-at91
CLEAN arch/arm/mach-omap2
CLEAN arch/arm/vdso
CLEAN certs
CLEAN lib
CLEAN usr
CLEAN net/wireless
CLEAN drivers/firmware/efi/libstub
nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file
/bin/sh: 1: arithmetic expression: expecting primary: " "
CLEAN arch/arm/boot/compressed
CLEAN drivers/scsi
CLEAN drivers/tty/vt
CLEAN arch/arm/boot
CLEAN vmlinux.symvers modules.builtin modules.builtin.modinfo
Even if you rerun the same command, the error message will not be
shown despite vmlinux is already gone.
To reproduce it, the parallel option -j is needed. Single thread
cleaning always executes 'archclean', 'vmlinuxclean' in this order,
so vmlinux still exists when arch/arm/boot/compressed/ is cleaned.
Looking at arch/arm/boot/compressed/Makefile does not help understand
the reason of the error message. Both KBSS_SZ and LDFLAGS_vmlinux are
assigned with '=' operator, hence, they are not expanded unless used.
Obviously, 'make clean' does not use them.
In fact, the root cause exists in the top Makefile:
export LDFLAGS_vmlinux
Since LDFLAGS_vmlinux is an exported variable, LDFLAGS_vmlinux in
arch/arm/boot/compressed/Makefile is expanded when scripts/Makefile.clean
has a command to execute. This is why the error message shows up only
when there exist build artifacts in arch/arm/boot/compressed/.
Adding 'unexport LDFLAGS_vmlinux' to arch/arm/boot/compressed/Makefile
will fix it as far as ARCH=arm is concerned, but I think the proper fix
is to get rid of 'export LDFLAGS_vmlinux' from the top Makefile.
LDFLAGS_vmlinux in the top Makefile contains linker flags for the top
vmlinux. LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is for
arch/arm/boot/compressed/vmlinux. They just happen to have the same
variable name, but are used for different purposes. Stop shadowing
LDFLAGS_vmlinux.
This commit passes LDFLAGS_vmlinux to scripts/link-vmlinux.sh via a
command line parameter instead of via an environment variable. LD and
KBUILD_LDFLAGS are exported, but I did the same for consistency. Anyway,
they must be included in cmd_link-vmlinux to allow if_changed to detect
the changes in LD or KBUILD_LDFLAGS.
The following Makefiles are not affected:
arch/arm/boot/compressed/Makefile
arch/h8300/boot/compressed/Makefile
arch/nios2/boot/compressed/Makefile
arch/parisc/boot/compressed/Makefile
arch/s390/boot/compressed/Makefile
arch/sh/boot/compressed/Makefile
arch/sh/boot/romimage/Makefile
arch/x86/boot/compressed/Makefile
They use ':=' or '=' to clear the LDFLAGS_vmlinux inherited from the
top Makefile.
We need to take a closer look at the impact to unicore32 and xtensa.
arch/unicore32/boot/compressed/Makefile only uses '+=' operator for
LDFLAGS_vmlinux. So, the decompressor previously inherited the linker
flags from the top Makefile.
However, commit 70fac51feaf2 ("unicore32 additional architecture files:
boot process") was merged before commit 1f2bfbd00e46 ("kbuild: link of
vmlinux moved to a script"). So, I rather consider this is a bug fix of
1f2bfbd00e46.
arch/xtensa/boot/boot-elf/Makefile is also affected, but this is also
considered a fix for the same reason. It did not inherit LDFLAGS_vmlinux
when commit 4bedea945451 ("[PATCH] xtensa: Architecture support for
Tensilica Xtensa Part 2") was merged. I deleted $(LDFLAGS_vmlinux),
which is now empty.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull automatic variable initialization updates from Kees Cook:
"This adds the "zero" init option from Clang, which is being used
widely in production builds of Android and Chrome OS (though it also
keeps the "pattern" init, which is better for debug builds).
- Introduce CONFIG_INIT_STACK_ALL_ZERO (Alexander Potapenko)"
* tag 'var-init-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
security: allow using Clang's zero initialization for stack variables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The main change in this cycle was to add support for ZSTD-compressed
kernel and initrd images.
ZSTD has a very fast decompressor, yet it compresses better than gzip"
* tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: dontdiff: Add zstd compressed files
.gitignore: Add ZSTD-compressed files
x86: Add support for ZSTD compressed kernel
x86: Bump ZO_z_extra_bytes margin for zstd
usr: Add support for zstd compressed initramfs
init: Add support for zstd compressed kernel
lib: Add zstd support to decompress
lib: Prepare zstd for preboot environment, improve performance
|
|
|
|
Resolved kernel/bpf/btf.c using instructions from merge commit
69138b34a7248d2396ab85c8652e20c0c39beaba
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- Add the zstd and zstd22 cmds to scripts/Makefile.lib
- Add the HAVE_KERNEL_ZSTD and KERNEL_ZSTD options
Architecture specific support is still needed for decompression.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-4-nickrterrell@gmail.com
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild into master
Pull Kbuild fixes from Masahiro Yamada:
- do not use non-portable strsep() in a host program
- fix single target builds for external modules
- change Clang's --prefix option to make it work for the latest Clang
* tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
kbuild: fix single target builds for external modules
modpost: remove use of non-standard strsep() in HOSTCC code
|
|
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CROSS_COMPILE is set (e.g. aarch64-linux-gnu-), if
$(CROSS_COMPILE)elfedit is found at /usr/bin/aarch64-linux-gnu-elfedit,
GCC_TOOLCHAIN_DIR will be set to /usr/bin/. --prefix= will be set to
/usr/bin/ and Clang as of 11 will search for both
$(prefix)aarch64-linux-gnu-$needle and $(prefix)$needle.
GCC searchs for $(prefix)aarch64-linux-gnu/$version/$needle,
$(prefix)aarch64-linux-gnu/$needle and $(prefix)$needle. In practice,
$(prefix)aarch64-linux-gnu/$needle rarely contains executables.
To better model how GCC's -B/--prefix takes in effect in practice, newer
Clang (since
https://github.com/llvm/llvm-project/commit/3452a0d8c17f7166f479706b293caf6ac76ffd90)
only searches for $(prefix)$needle. Currently it will find /usr/bin/as
instead of /usr/bin/aarch64-linux-gnu-as.
Set --prefix= to $(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
(/usr/bin/aarch64-linux-gnu-) so that newer Clang can find the
appropriate cross compiling GNU as (when -no-integrated-as is in
effect).
Cc: stable@vger.kernel.org
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1099
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 36 non-merge commits during the last 7 day(s) which contain
a total of 62 files changed, 2242 insertions(+), 468 deletions(-).
The main changes are:
1) Avoid trace_printk warning banner by switching bpf_trace_printk to use
its own tracing event, from Alan.
2) Better libbpf support on older kernels, from Andrii.
3) Additional AF_XDP stats, from Ciara.
4) build time resolution of BTF IDs, from Jiri.
5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using BTF_ID_LIST macro to define lists for several helpers
using BTF arguments.
And running resolve_btfids on vmlinux elf object during linking,
so the .BTF_ids section gets the IDs resolved.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200711215329.41165-5-jolsa@kernel.org
|
|
The resolve_btfids tool will be used during the vmlinux linking,
so it's necessary it's ready for it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200711215329.41165-3-jolsa@kernel.org
|
|
|
|
Commit f566e1fbadb6 ("kbuild: make multiple directory targets work")
broke single target builds for external modules. Fix this.
Fixes: f566e1fbadb6 ("kbuild: make multiple directory targets work")
Reported-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Bjørn Mork <bjorn@mork.no>
|
|
Some Makefiles already pass -fno-stack-protector unconditionally.
For example, arch/arm64/kernel/vdso/Makefile, arch/x86/xen/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -fno-stack-protector.
GCC 4.8 and Clang support this option (https://godbolt.org/z/_HDGzN)
Get rid of cc-option from -fno-stack-protector.
Remove CONFIG_CC_HAS_STACKPROTECTOR_NONE, which is always 'y'.
Note:
arch/mips/vdso/Makefile adds -fno-stack-protector twice, first
unconditionally, and second conditionally. I removed the second one.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes frin Masahiro Yamada:
- fix various bugs in xconfig
- fix some issues in cross-compilation using Clang
- fix documentation
* tag 'kbuild-fixes-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
.gitignore: Do not track `defconfig` from `make savedefconfig`
kbuild: make Clang build userprogs for target architecture
kbuild: fix CONFIG_CC_CAN_LINK(_STATIC) for cross-compilation with Clang
kconfig: qconf: parse newer types at debug info
kconfig: qconf: navigate menus on hyperlinks
kconfig: qconf: don't show goback button on splitMode
kconfig: qconf: simplify the goBack() logic
kconfig: qconf: re-implement setSelected()
kconfig: qconf: make debug links work again
kconfig: qconf: make search fully work again on split mode
kconfig: qconf: cleanup includes
docs: kbuild: fix ReST formatting
gcc-plugins: fix gcc-plugins directory path in documentation
|
|
Programs added 'userprogs' should be compiled for the target
architecture i.e. the same architecture as the kernel.
GCC does this correctly since the target architecture is implied
by the toolchain prefix.
Clang builds userspace programs always for the host architecture
because the target triple is currently missing.
Fix this.
Fixes: 7f3a59db274c ("kbuild: add infrastructure to build userspace programs")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
|
|
|
|
|
|
This reverts commit e0b250b57dcf403529081e5898a9de717f96b76b,
which broke build systems that need to install files to a certain
path, but do not set INSTALL_MOD_PATH when invoking 'make install'.
$ make INSTALL_PATH=/tmp/destdir install
mkdir: cannot create directory ‘/lib/modules/5.8.0-rc1+/’: Permission denied
Makefile:1342: recipe for target '_builtin_inst_' failed
make: *** [_builtin_inst_] Error 1
While modules.builtin is useful also for CONFIG_MODULES=n, this change
in the behavior is quite unexpected. Maybe "make modules_install"
can install modules.builtin irrespective of CONFIG_MODULES as Jonas
originally suggested.
Anyway, that commit should be reverted ASAP.
Reported-by: Douglas Anderson <dianders@chromium.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
|
In addition to -ftrivial-auto-var-init=pattern (used by
CONFIG_INIT_STACK_ALL now) Clang also supports zero initialization for
locals enabled by -ftrivial-auto-var-init=zero. The future of this flag
is still being debated (see https://bugs.llvm.org/show_bug.cgi?id=45497).
Right now it is guarded by another flag,
-enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang,
which means it may not be supported by future Clang releases. Another
possible resolution is that -ftrivial-auto-var-init=zero will persist
(as certain users have already started depending on it), but the name
of the guard flag will change.
In the meantime, zero initialization has proven itself as a good
production mitigation measure against uninitialized locals. Unlike pattern
initialization, which has a higher chance of triggering existing bugs,
zero initialization provides safe defaults for strings, pointers, indexes,
and sizes. On the other hand, pattern initialization remains safer for
return values. Chrome OS and Android are moving to using zero
initialization for production builds.
Performance-wise, the difference between pattern and zero initialization
is usually negligible, although the generated code for zero
initialization is more compact.
This patch renames CONFIG_INIT_STACK_ALL to CONFIG_INIT_STACK_ALL_PATTERN
and introduces another config option, CONFIG_INIT_STACK_ALL_ZERO, that
enables zero initialization for locals if the corresponding flags are
supported by Clang.
Cc: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20200616083435.223038-1-glider@google.com
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Commit
10e68b02c861 ("Makefile: support compressed debug info")
added support for compressed debug sections.
Support is detected by checking
- does the compiler support -gz=zlib
- does the assembler support --compressed-debug-sections=zlib
- does the linker support --compressed-debug-sections=zlib
However, the gcc driver's support for this option is somewhat
convoluted. The driver's builtin specs are set based on the version of
binutils that it was configured with. It reports an error if the
configure-time linker/assembler (i.e., not necessarily the actual
assembler that will be run) do not support the option, but only if the
assembler (or linker) is actually invoked when -gz=zlib is passed.
The cc-option check in scripts/Kconfig.include does not invoke the
assembler, so the gcc driver reports success even if it does not support
the option being passed to the assembler.
Because the as-option check passes the option directly to the assembler
via -Wa,--compressed-debug-sections=zlib, the gcc driver does not see
this option and will never report an error.
Combined with an installed version of binutils that is more recent than
the one the compiler was built with, it is possible for all three tests
to succeed, yet an actual compilation with -gz=zlib to fail.
Moreover, it is unnecessary to explicitly pass
--compressed-debug-sections=zlib to the assembler via -Wa, since the
driver will do that automatically when it supports -gz=zlib.
Convert the as-option to just -gz=zlib, simplifying it as well as
performing a better test of the gcc driver's capabilities.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
|
|
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp.
GZIP, BZIP2, LZOP env variables are reserved by the tools. The original
attempt to redefine them internally doesn't work in makefiles/scripts
intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in
broken builds. There can be other broken build commands because of this,
so the universal solution is to use non-reserved env variables for the
compression tools.
Fixes: 8dfb61dcbace ("kbuild: add variables for compression tools")
Signed-off-by: Denis Efremov <efremov@linux.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is
updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when
CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
kbuild: add variables for compression tools
Makefile: install modules.builtin even if CONFIG_MODULES=n
mksysmap: Fix the mismatch of '.L' symbols in System.map
kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
modpost: change elf_info->size to size_t
modpost: remove is_vmlinux() helper
modpost: strip .o from modname before calling new_module()
modpost: set have_vmlinux in new_module()
modpost: remove mod->skip struct member
modpost: add mod->is_vmlinux struct member
modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
modpost: remove mod->is_dot_o struct member
modpost: move -d option in scripts/Makefile.modpost
modpost: remove -s option
modpost: remove get_next_text() and make {grab,release_}file static
modpost: use read_text_file() and get_line() for reading text files
modpost: avoid false-positive file open error
modpost: fix potential mmap'ed file overrun in get_src_version()
modpost: add read_text_file() and get_line() helpers
modpost: do not call get_modinfo() for vmlinux(.o)
...
|
|
Allow user to use alternative implementations of compression tools,
such as pigz, pbzip2, pxz. For example, multi-threaded tools to
speed up the build:
$ make GZIP=pigz BZIP2=pbzip2
Variables _GZIP, _BZIP2, _LZOP are used internally because original env
vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
since 2015. However, alternative implementations (e.g., pigz) still rely
on it. BZIP2, BZIP, LZOP vars are not obsolescent.
The credit goes to @grsecurity.
As a sidenote, for multi-threaded lzma, xz compression one can use:
$ export XZ_OPT="--threads=0"
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Many applications check for available kernel features via:
- /proc/modules (loaded modules, present if CONFIG_MODULES=y)
- $(MODLIB)/modules.builtin (builtin modules)
They fail to detect features if the kernel was built with CONFIG_MODULES=n
and modules.builtin isn't installed.
Therefore, add the target "_builtin_inst_" and make "install" and
"modules_install" depend on it.
Tests results:
- make install: kernel image is copied as before, modules.builtin copied
- make modules_install: (CONFIG_MODULES=n) nothing is copied, exit 1
Signed-off-by: Jonas Zeiger <jonas.zeiger@talpidae.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If modpost fails to load a symbol dump file, it cannot check unresolved
symbols, hence module dependency will not be added. Nor CRCs can be added.
Currently, external module builds check only $(objtree)/Module.symvers,
but it should check files specified by KBUILD_EXTRA_SYMBOLS as well.
Move the warning message from the top Makefile to scripts/Makefile.modpost
and print the warning if any dump file is missing.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
