aboutsummaryrefslogtreecommitdiff
path: root/arch/arc/boot/dts
AgeCommit message (Collapse)Author
2022-10-17arc: dts: Harmonize EHCI/OHCI DT nodes nameSerge Semin
In accordance with the Generic EHCI/OHCI bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2022-04-18ARC: dts: align SPI NOR node name with dtschemaKrzysztof Kozlowski
The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2022-01-08kbuild: do not quote string values in include/config/auto.confMasahiro Yamada
The previous commit fixed up all shell scripts to not include include/config/auto.conf. Now that include/config/auto.conf is only included by Makefiles, we can change it into a more Make-friendly form. Previously, Kconfig output string values enclosed with double-quotes (both in the .config and include/config/auto.conf): CONFIG_X="foo bar" Unlike shell, Make handles double-quotes (and single-quotes as well) verbatim. We must rip them off when used. There are some patterns: [1] $(patsubst "%",%,$(CONFIG_X)) [2] $(CONFIG_X:"%"=%) [3] $(subst ",,$(CONFIG_X)) [4] $(shell echo $(CONFIG_X)) These are not only ugly, but also fragile. [1] and [2] do not work if the value contains spaces, like CONFIG_X=" foo bar " [3] does not work correctly if the value contains double-quotes like CONFIG_X="foo\"bar" [4] seems to work better, but has a cost of forking a process. Anyway, quoted strings were always PITA for our Makefiles. This commit changes Kconfig to stop quoting in include/config/auto.conf. These are the string type symbols referenced in Makefiles or scripts: ACPI_CUSTOM_DSDT_FILE ARC_BUILTIN_DTB_NAME ARC_TUNE_MCPU BUILTIN_DTB_SOURCE CC_IMPLICIT_FALLTHROUGH CC_VERSION_TEXT CFG80211_EXTRA_REGDB_KEYDIR EXTRA_FIRMWARE EXTRA_FIRMWARE_DIR EXTRA_TARGETS H8300_BUILTIN_DTB INITRAMFS_SOURCE LOCALVERSION MODULE_SIG_HASH MODULE_SIG_KEY NDS32_BUILTIN_DTB NIOS2_DTB_SOURCE OPENRISC_BUILTIN_DTB SOC_CANAAN_K210_DTB_SOURCE SYSTEM_BLACKLIST_HASH_LIST SYSTEM_REVOCATION_KEYS SYSTEM_TRUSTED_KEYS TARGET_CPU UNUSED_KSYMS_WHITELIST XILINX_MICROBLAZE0_FAMILY XILINX_MICROBLAZE0_HW_VER XTENSA_VARIANT_NAME I checked them one by one, and fixed up the code where necessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-03-12ARC: haps: bump memory to 1 GBVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-10-05ARC: [dts] fix the errors detected by dtbs_checkZhen Lei
xxx/arc/boot/dts/axs101.dt.yaml: dw-apb-ictl@e0012000: $nodename:0: \ 'dw-apb-ictl@e0012000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' From schema: xxx/interrupt-controller/snps,dw-apb-ictl.yaml The node name of the interrupt controller must start with "interrupt-controller" instead of "dw-apb-ictl". Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-10-05ARC: [plat-eznps]: Drop support for EZChip NPS platformVineet Gupta
NPS customers are no longer doing active development, as evident from rand config build failures reported in recent times, so drop support for NPS platform. Tested-by: kernel test robot <lkp@intel.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-09-01ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-idEvgeniy Didin
HSDK board has Micrel KSZ9031, recent commit bcf3440c6dd ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") caused a breakdown of Ethernet. Using 'phy-mode = "rgmii"' is not correct because accodring RGMII specification it is necessary to have delay on RX (PHY to MAX) which is not generated in case of "rgmii". Using "rgmii-id" adds necessary delay and solves the issue. Also adding name of PHY placed on HSDK board. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-08-16ARC: HSDK: wireup perf irqVineet Gupta
Newer version of HSDK aka HSDK-4xD (with dual issue HS48x4 CPU) wired up the perf interrupt, so enable that in DT. This is OK for old HSDK where this irq is ignored because pct irq is not wired up in hardware. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-03-16ARC: [plat-axs10x]: PGU: remove unused encoder-slave propertyEugeniy Paltsev
ARC PGU is looking for encoder via endpoint mechanism and doesn't use "encoder-slave" property for a long time. Let's drop unused "encoder-slave" property from ARC PGU node in axs10x. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-01-14ARC: [plat-axs10x]: Add missing multicast filter number to GMAC nodeJose Abreu
Add a missing property to GMAC node so that multicast filtering works correctly. Fixes: 556cc1c5f528 ("ARC: [axs101] Add support for AXS101 SDP (software development platform)") Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-12-04Merge tag 'arc-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta - Jump Label support for ARC - kmemleak enabled - arc mm backend TLB Miss / flush optimizations - nSIM platform switching to dwuart (vs. arcuart) and ensuing defconfig updates and cleanups - axs platform pll / video-mode updates * tag 'arc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: add kmemleak support ARC: [plat-axs10x]: remove hardcoded video mode from bootargs ARC: [plat-axs10x]: use pgu pll instead of fixed clock ARC: ARCv2: jump label: implement jump label patching ARC: mm: tlb flush optim: elide redundant uTLB invalidates for MMUv3 ARC: mm: tlb flush optim: elide repeated uTLB invalidate in loop ARC: mm: tlb flush optim: Make TLBWriteNI fallback to TLBWrite if not available ARC: mm: TLB Miss optim: avoid re-reading ECR ARCv2: mm: TLB Miss optim: Use double world load/stores LDD/STD ARCv2: mm: TLB Miss optim: SMP builds can cache pgd pointer in mmu scratch reg ARC: nSIM_700: remove unused network options ARC: nSIM_700: switch to DW UART usage ARC: merge HAPS-HS with nSIM-HS configs ARC: HAPS: cleanup defconfigs from unused ETH drivers ARC: HAPS: add HIGHMEM memory zone to DTS ARC: HAPS: use same UART configuration everywhere ARC: HAPS: cleanup defconfigs from unused IO-related options ARC: regenerate nSIM and HAPS defconfigs
2019-11-20ARC: [plat-axs10x]: remove hardcoded video mode from bootargsEugeniy Paltsev
Now have pixel clock PLL driver and we can change pixel clock rate so we don't need to enforce one exact video mode. Moreover enforcing video mode is harmful in case of we enforce mode which isn't supported by the monitor we are using. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-11-20ARC: [plat-axs10x]: use pgu pll instead of fixed clockEugeniy Paltsev
Use PLL driver instead of fixed-clock for PGU pixel clock. That allows us to support wider range of graphic modes. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28ARC: nSIM_700: remove unused network optionsEugeniy Paltsev
We have snps,arc-emac enabled in nSIM_700. It's obsolete and it's not used anymore so remove its device tree node and disable unused network options in defconfig. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28ARC: nSIM_700: switch to DW UART usageEugeniy Paltsev
Switch nsim_700_defconfig to dwuart for consistent uart settings for all nSIM configurations. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28ARC: merge HAPS-HS with nSIM-HS configsEugeniy Paltsev
Starting from nSIM 2019.06 is possible to use DW UART instead of ARC UART. That allows us to merge "nsim_hs" with "haps_hs" and "nsim_hs_smp" with "haps_hs_smp" with minor changes which were done in previous commits. We eliminate nsim_hs_defconfig and nsim_hs_smp_defconfig and leave haps_hs_defconfig and haps_hs_smp_defconfig which can be used on HAPS / nSIM / ZEBU / QEMU platforms without additional changes in Linux kernel. For nSIM we should now use UART property values "-prop=nsim_mem-dev=uart0,kind=dwuart,base=0xf0000000" instead of previously used "-prop=nsim_mem-dev=uart0,base=0xc0fc1000" "use_connect" and "irq" values of UART property remains untouched. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28ARC: HAPS: add HIGHMEM memory zone to DTSEugeniy Paltsev
This is required as a preparation of merging nSIM and HASP defonfig and device tree. As we have HIGHMEM disabled in both HAPS and nSIM defconfigs this doesn't lead to any functional change. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28ARC: HAPS: use same UART configuration everywhereEugeniy Paltsev
For some reason we use ns8250 UART compatible on UP HAPS configuration and ns16550a (which is ns8250 with FIFO support) on SMP HAPS configuration. Given that we have same UART IP with same IP configuration on both HAPS configuration use ns16550a compatible everywhere. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-22ARC: [plat-hsdk]: Enable on-boardi SPI ADC ICEugeniy Paltsev
HSDK board has adc108s102 SPI ADC IC installed, enable it. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-22ARC: [plat-hsdk]: Enable on-board SPI NOR flash ICEugeniy Paltsev
HSDK board has sst26wf016b SPI NOR flash IC installed, enable it. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-08-05ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurationsEugeniy Paltsev
We want to use DW AXI DMAC on HSDK board in our automated verification to test cache & dma kernel code changes. This is perfect candidate as we don't depend on any external peripherals like MMC card / USB storage / etc. To increase test coverage we want to test both options: * DW AXI DMAC is connected through IOC port & dma direct ops used * DW AXI DMAC is connected to DDR port & dma noncoherent ops used Introduce 'arc_hsdk_axi_dmac_coherent' global variable which can be modified by debugger (same way as we patch 'ioc_enable') to switch between these options without recompiling the kernel. Depend on this value we tweak memory bridge configuration and "dma-coherent" DTS property of DW AXI DMAC. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-08ARC: [plat-hsdk]: enable DW SPI controllerEugeniy Paltsev
HSDK SoC has DW SPI controller. Enable it in preparation of enabling on-board SPI peripherals. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-08ARC: [haps] Add Virtio supportAlexey Brodkin
As a preparation for QEMU usage for ARC let's add basic Virtio-MMIO peripherals support for the platform we're going to use. For now we add 5 Virtio slots in .dts and enable block and network devices via Virtio-MMIO. Note even though typically Virtio register set fits in 0x200 bytes we "allocate" here 0x2000 so that it matches ARC's default 8KiB page size and so remapping of that area is done clearly. We also enable DEVTMPFS automount for more convenient use of external root file-stystem. Before that we used to use built-in Initramfs which didn't automount DEVTMPFS anyways so we didn't need that option, while now it starts making sense. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-08Merge tag 'spdx-5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 291Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called copying this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope [that] it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 57 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.515993066@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-28ARC: [plat-hsdk] Get rid of inappropriate PHY settingsAlexey Brodkin
Initial bring-up of the platform was done on FPGA prototype where TI's DP83867 PHY was used. And so some specific PHY options were added. Just to confirm this is what we get on FPGA prototype in the bootlog: | TI DP83867 stmmac-0:00: attached PHY driver [TI DP83867] ... On real board though we have Micrel KZS9031 PHY and we even have CONFIG_MICREL_PHY=y set in hsdk_defconfig. That's what we see in the bootlog: | Micrel KSZ9031 Gigabit PHY stmmac-0:00: ... So essentially all TI-related bits have to go away. Cc: Rob Herring <robh+dt@kernel.org> Acked-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-28ARC: [plat-hsdk]: Add support of Vivante GPUEugeniy Paltsev
HSDK board has built-in Vivante GPU IP which works perfectly fine with Etnaviv driver, so let's use it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-28ARC: [plat-hsdk]: enable creg-gpio controllerEugeniy Paltsev
HSDK SOC has CREG GPIO controller which can be used to control SPI chip select lines. Enable it in preparation of enabling SPI peripherals. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-21ARC: [plat-hsdk]: Add missing FIFO size entry in GMAC nodeJose Abreu
Add the binding for RX/TX fifo size of GMAC node. Cc: Joao Pinto <jpinto@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-21ARC: [plat-hsdk]: Add missing multicast filter bins number to GMAC nodeJose Abreu
GMAC controller on HSDK boards supports 256 Hash Table size so we need to add the multicast filter bins property. This allows for the Hash filter to work properly using stmmac driver. Cc: Joao Pinto <jpinto@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-04-02ARC: [hsdk] Make it easier to add PAE40 region to DTBVineet Gupta
1. Bump top level address-cells/size-cells nodes to 2 (to ensure all down stream addresses are 64-bits, unless explicitly specified otherwise (in "soc" bus with all peripherals) 2. "memory" also specified with address/size 2 3. Add a commented reference for PAE40 region beyond 4GB physical address space Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-25ARC: [plat-hsdk]: Enable AXI DW DMAC supportEugeniy Paltsev
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-25ARC: [plat-hsdk]: Add reset controller handle to manage USB resetEugeniy Paltsev
DW USB controller on HSDK hangs sometimes after SW reset, so add reset handle to make possible to reset DW USB controller HW. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-25ARC: DTB: [scripted] fix node name and address spellingAlexey Brodkin
1. Remove "0x" prefix from unit-address of node names ----------------------->8------------------------ sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts* ----------------------->8------------------------ 2. Make all hex addresses lowercase: ----------------------->8------------------------ sed -i 's/@\([0-9A-Za-z]*\)/@\L\1/g' arch/arc/boot/dts/*.dts* sed -i 's/0x\([0-9A-Za-z]*\)/0x\L\1/g' arch/arc/boot/dts/*.dts* ----------------------->8------------------------ Inspired by [1] and the like. [1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/ Reviewed-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-12ARC: [plat-hsdk] Enable DW APB GPIO supportEugeniy Paltsev
Enable GPIO support on HSDK. HSDK SoC includes Synopsys DesignWare DW_apb_gpio IP with 24 GPIOs mapped onto port A. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-08-31ARC: dma [IOC]: mark DMA devices connected as dma-coherentEugeniy Paltsev
Mark DMA devices on AXS103 and HSDK boards connected through IOC port as dma-coherent. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-08-27ARC: [plat-axs*/plat-hsdk]: Allow U-Boot to pass MAC-address to the kernelAlexey Brodkin
Otherwise kernel uses random MAC which is not very conveniet. With that change in place use might set desired MAC in U-Boot with "setenv ethaddr 11:22:33:44:55:66", save environment and then from boot to boot the same MAC will be used by the kernel. One other note for this to happen it's required to pass board's .dtb in U-Boot's "bootm" command like that: ------------------->8----------------- bootm 0x82000000 - 0x84000000 ------------------->8----------------- Here 0x82000000 is location of uImage while 0x80000000 is location of either axs10x.dtb or hsdk.dtb previously loaded from SD-card, USB storage or TFTP server. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: stable@vger.kernel.org # 4.14 Cc: devicetree@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-04-07kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markersMasahiro Yamada
GNU Make automatically deletes intermediate files that are updated in a chain of pattern rules. Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts Example 2) %.o <- %.c <- %.c_shipped A couple of makefiles mark such targets as .PRECIOUS to prevent Make from deleting them, but the correct way is to use .SECONDARY. .SECONDARY Prerequisites of this special target are treated as intermediate files but are never automatically deleted. .PRECIOUS When make is interrupted during execution, it may delete the target file it is updating if the file was modified since make started. If you mark the file as precious, make will never delete the file if interrupted. Both can avoid deletion of intermediate files, but the difference is the behavior when Make is interrupted; .SECONDARY deletes the target, but .PRECIOUS does not. The use of .PRECIOUS is relatively rare since we do not want to keep partially constructed (possibly corrupted) targets. Another difference is that .PRECIOUS works with pattern rules whereas .SECONDARY does not. .PRECIOUS: $(obj)/%.lex.c works, but .SECONDARY: $(obj)/%.lex.c has no effect. However, for the reason above, I do not want to use .PRECIOUS which could cause obscure build breakage. The targets specified as .SECONDARY must be explicit. $(targets) contains all targets that need to include .*.cmd files. So, the intermediates you want to keep are mostly in there. Therefore, mark $(targets) as .SECONDARY. It means primary targets are also marked as .SECONDARY, but I do not see any drawback for this. I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This will make Kbuild search for non-existing .*.cmd files, but this is not a noticeable performance issue. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-02-06arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mbBartosz Golaszewski
Using compatible strings without the <manufacturer> part for at24 is deprecated since commit 6da28acf745f ("dt-bindings: at24: consistently document the compatible property"). Use a correct 'atmel,<model>' value. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-01-18ARC: Enable fatal signals on boot for dev platformsAlexey Brodkin
It's very convenient to have fatal signals enabled on developemnt platform as this allows to catch problems that happen early in user-space (like crashing init or dynamic loader). Otherwise we may either enable it later from alive taregt console by "echo 1 > /proc/sys/kernel/print-fatal-signals" but: 1. We might be unfortunate enough to not reach working console 2. Forget to enable fatal signals and miss something interesting Given we're talking about development platforms here it shouldn't be a problem if a bit more data gets printed to debug console. Moreover this makes behavior of all our dev platforms predictable as today some platforms already have it enabled and some don't - which is way too inconvenient. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20ARC: [plat-axs103]: Set initial core pll output frequencyEugeniy Paltsev
Set initial core pll output frequency specified in device tree to 100MHz for SMP configuration and 90MHz for UP configuration. It will be applied at the core pll driver probing. Update platform quirk for decreasing core frequency for quad core configuration. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-12-20ARC: [plat-hsdk]: Set initial core pll output frequencyEugeniy Paltsev
Set initial core pll output frequency specified in device tree to 1GHz. It will be applied at the core pll driver probing. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-11-25Merge tag 'arc-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - more changes for HS48 cores: supporting MMUv5, detecting new micro-arch gizmos - axs10x platform wiring up reset driver merged in this cycle - ARC perf driver optimizations * tag 'arc-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: avoid vmalloc backed mmap ARCv2: perf: optimize given that num counters <= 32 ARCv2: perf: tweak overflow interrupt ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet reset ARCv2: boot log: updates for HS48: dual-issue, ECC, Loop Buffer ARCv2: Accomodate HS48 MMUv5 by relaxing MMU ver checking ARC: [plat-axs10x] auto-select AXS101 or AXS103 given the ISA config
2017-11-15ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet resetEugeniy Paltsev
DW ethernet controller on axs10x hangs sometimes after SW reset. Invoke the newly aded driver (reset-axs10x.c) by adding the DT bits. With this in place, we don't need the open-coded quirk in platform code, so get rid of it as well ! Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-09kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.libMasahiro Yamada
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom/<soc>/. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08kbuild: clean up *.dtb and *.dtb.S patterns from top-level MakefileMasahiro Yamada
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 01:06:04 +0000