aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/Kconfig-nommu
AgeCommit message (Collapse)Author
2019-02-01ARM: 8832/1: NOMMU: Limit visibility for CONFIG_FLASH_{MEM_BASE,SIZE}Vladimir Murzin
It looks like usage of CONFIG_FLASH_{MEM_BASE,SIZE} is limited with: arch/arm/mm/proc-arm740.S arch/arm/mm/proc-arm940.S arch/arm/mm/proc-arm946.S So it might look confusing to see the option for anything except these. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-16Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - add support for ELF fdpic binaries on both MMU and noMMU platforms - linker script cleanups - support for compressed .data section for XIP images - discard memblock arrays when possible - various cleanups - atomic DMA pool updates - better diagnostics of missing/corrupt device tree - export information to allow userspace kexec tool to place images more inteligently, so that the device tree isn't overwritten by the booting kernel - make early_printk more efficient on semihosted systems - noMMU cleanups - SA1111 PCMCIA update in preparation for further cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (38 commits) ARM: 8719/1: NOMMU: work around maybe-uninitialized warning ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r" ARM: 8713/1: NOMMU: Support MPU in XIP configuration ARM: 8712/1: NOMMU: Use more MPU regions to cover memory ARM: 8711/1: V7M: Add support for MPU to M-class ARM: 8710/1: Kconfig: Kill CONFIG_VECTORS_BASE ARM: 8709/1: NOMMU: Disallow MPU for XIP ARM: 8708/1: NOMMU: Rework MPU to be mostly done in C ARM: 8707/1: NOMMU: Update MPU accessors to use cp15 helpers ARM: 8706/1: NOMMU: Move out MPU setup in separate module ARM: 8702/1: head-common.S: Clear lr before jumping to start_kernel() ARM: 8705/1: early_printk: use printascii() rather than printch() ARM: 8703/1: debug.S: move hexbuf to a writable section ARM: add additional table to compressed kernel ARM: decompressor: fix BSS size calculation pcmcia: sa1111: remove special sa1111 mmio accessors pcmcia: sa1111: use sa1111_get_irq() to obtain IRQ resources ARM: better diagnostics with missing/corrupt dtb ARM: 8699/1: dma-mapping: Remove init_dma_coherent_pool_size() ARM: 8698/1: dma-mapping: Mark atomic_pool as __ro_after_init ..
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23ARM: 8713/1: NOMMU: Support MPU in XIP configurationVladimir Murzin
Currently, there is assumption in early MPU setup code that kernel image is located in RAM, which is obviously not true for XIP. To run code from ROM we need to make sure that it is covered by MPU. However, due to we allocate regions (semi-)dynamically we can run into issue of trimming region we are running from in case ROM spawns several MPU regions. To help deal with that we enforce minimum alignments for start end end of XIP address space as 1MB and 128Kb correspondingly. Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-23ARM: 8711/1: V7M: Add support for MPU to M-classVladimir Murzin
This patch makes it possible to use MPU with v7M cores. Tested-by: Szemző András <sza@esh.hu> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-23ARM: 8709/1: NOMMU: Disallow MPU for XIPVladimir Murzin
It seems that MPU never worked with XIP, so we just disallow such combination. Tested-by: Szemző András <sza@esh.hu> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-01-10ARM: 8635/1: nommu: allow enabling REMAP_VECTORS_TO_RAMAfzal Mohammed
REMAP_VECTORS_TO_RAM depends on DRAM_BASE, but since DRAM_BASE is a hex, REMAP_VECTORS_TO_RAM could never get enabled. Also depending on DRAM_BASE is redundant as whenever REMAP_VECTORS_TO_RAM makes itself available to Kconfig, DRAM_BASE also is available as the Kconfig gets sourced on !MMU. Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-17ARM: mpu: Ensure that MPU depends on CPU_V7Jonathan Austin
The support for the MPU is currently implemented only for R-class (PMSAv7/R). Since the merge of V7M support in to the kernel it is possible to select MPU support on V7M. This patch ensures that until MPU support for M-class processors is implemented, the MPU can only be selected with R-class CPUs Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-06-17ARM: mpu: Allow enabling of the MPU via kconfigJonathan Austin
Allows the user to select MPU support when compiling for ARM processors that support the PMSAv7. This ensures that CONFIG_SMP depends on the MPU in the case that no MMU is present. CONFIG_SMP_ON_UP is not implemented for nommu, so introduce an MMU dependency there. Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-17ARM: ARMv7-M: Allow the building of new kernel portUwe Kleine-König
This patch modifies the required Kconfig and Makefile files to allow the building of kernel for Cortex-M3. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Jonathan Austin <jonathan.austin@arm.com> Tested-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2007-10-12[ARM] 4532/1: allow configuration of processor IDGreg Ungerer
Allow for configuration of the processor ID for the simplar non-MMU ARM parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] nommu: manage the CP15 thingsHyok S. Choi
All the current CP15 access codes in ARM arch can be categorized and conditioned by the defines as follows: Related operation Safe condition a. any CP15 access !CPU_CP15 b. alignment trap CPU_CP15_MMU c. D-cache(C-bit) CPU_CP15 d. I-cache CPU_CP15 && !( CPU_ARM610 || CPU_ARM710 || CPU_ARM720 || CPU_ARM740 || CPU_XSCALE || CPU_XSC3 ) e. alternate vector CPU_CP15 && !CPU_ARM740 f. TTB CPU_CP15_MMU g. Domain CPU_CP15_MMU h. FSR/FAR CPU_CP15_MMU For example, alternate vector is supported if and only if "CPU_CP15 && !CPU_ARM740" is satisfied. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-27[ARM] nommu: fixups for the exception vectorsHyok S. Choi
The high page vector (0xFFFF0000) does not supported in nommu mode. This patch allows the vectors to be 0x00000000 or the begining of DRAM in nommu mode. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-27[ARM] nommu: add nommu specific Kconfig and MMUEXT variable in MakefileHyok S. Choi
This patch adds Kconfig-nommu for noMMU specific configurations and MMUEXT variable into Makefile. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>