aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/configs/multi_v5_defconfig
AgeCommit message (Collapse)Author
2022-08-29ARM: configs: replace CONFIG_NO_HZ=y with CONFIG_NO_HZ_IDLE=yStefan Hansson
According to https://www.kernel.org/doc/html/latest/timers/no_hz.html, CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer kernels, so let's reflect that in the 32-bit ARM defconfigs. Signed-off-by: Stefan Hansson <newbie13xd@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: defconfig: clean up multi_v4t and multi_v5 configsArnd Bergmann
Integrator now selects the regulators and versatile selects the reset driver, so the correspondig options can be dropped from the defconfig files. Fixes: d2854bbe5f5c ("ARM: integrator: Add some Kconfig selections") Fixes: 1c6e288da6cc ("ARM: versatile: move restart to the device tree") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: defconfig: reorder defconfig filesArnd Bergmann
The debug-info and can subystem options have moved around in the 'savedefconfig' output, so fix these up to reduce the clutter from the savedefconfig command. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-22ARM: davinci: mark all ATAGS board files as unusedArnd Bergmann
From an earlier discussion, it appears that the davinci da8xx machines that are still functional have already been converted to DT, while the remaining board files are only kept because nobody has stepped up to remove them. Mark all these boards as 'depends on UNUSED_BOARD_FILES' with the plan to remove them in early 2023 after the next longterm supported kernel is out. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-22ARM: orion: add ATAGS dependenciesArnd Bergmann
Most of the remaining arm board files in the kernel are unused and will be removed in early 2023 if no users step up. So far I got no user replies about the orion5x and mv78xx0 machines, but these are still supported in the default kernel of the Debian 'armel' (armv5 softfloat) distro, and there is an active project on github that tries to keep some of these machines working, and Mauri Sandberg is working on a DT conversion for the D-Link DNS-323. It appears the Debian-on-Buffalo project has not got the Terastation WXL working in a few years, and the other mv78xx0 machines are just the reference designs, so I assume none of these have remaining users. For the Orion5x family, the same is probably true for its reference implementations (RD88Fxxxxx, DB88F281) and the machines with less than 64MB of memory (WNR854T, WRT350N v2). The remaining nine machines are now scheduled to be kept for at least 2023, hopefully to be replaced with DT based versions. The mv78xx0_defconfig file needs to enable CONFIG_UNUSED_BOARD_FILES to still build, while the other affected defconfig files lose the specific boards. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Mauri Sandberg <maukka@ext.kapsi.fi> Link: https://github.com/1000001101000/Debian_on_Buffalo Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-22ARM: defconfig: address renamed CONFIG_DEBUG_INFO=yArnd Bergmann
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT, DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5. This was actually not what I had in mind when I suggested making it a 'choice' statement, but it's too late to change again now, and the Kconfig logic is more sensible in the new form. Change any defconfig file that had CONFIG_DEBUG_INFO enabled but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain default. Fixes: f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a choice") Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-22ARM: refresh defconfig filesArnd Bergmann
A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-04ARM: configs: Update multi_v5_defconfig for WM8731 bus refactoringMark Brown
The WM8731 driver has been refactored so the I2C and SPI bus code is separate modules. Refresh multi_v5_defconfig to reflect this. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: soc@kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220325153121.1598494-8-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-23ARM: configs: multi_v5: Enable Allwinner F1C100Andre Przywara
The Kconfig symbols required for the Allwinner F1C100 (MACH_SUNIV) are currently not selected by any defconfig. sunxi_defconfig only covers the v7 SoCs, but the F1C100s is ARMv5, so we cannot share a single image. Add the required symbols to multi_v5_defconfig, to give people some sane default config when playing around with this chip. This is probably more important as there are surely not many distros out there supporting ARMv5 out of the box. This allows my LicheePi Nano board to boot to a busybox prompt. The zImage size grows by about 50 KB, in detail: text data bss dec hex filename 10510000 4400700 687740 15598440 ee0368 vmlinux-old 10588592 4469096 686812 15744500 f03df4 vmlinux-new 14922908 arch/arm/boot/Image-old 15067388 arch/arm/boot/Image-new 6388016 arch/arm/boot/zImage-old 6440064 arch/arm/boot/zImage-new Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-6-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-19ARM: configs: clean up multi_v5_defconfigAndre Przywara
Clean up some cruft accumulated over time: - The default definition of CONFIG_ZBOOT_ROM_* got fixed in commit 39c3e304567a ("ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"), so we don't need the explicit setting anymore. - CONFIG_ABX500_CORE now explicitly depends on the ARMv7 ARCH_U8500, so we don't need to disable that symbol explicitly anymore. - CONFIG_DEBUG_FS was just moved around in the generated defconfig. No change to the generated .config or savedefconfig. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-5-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-19ARM: configs: multi_v5_defconfig: re-enable DRM_PANEL and FB_xxxAndre Przywara
Commit 91185d55b32e ("drm: Remove DRM_KMS_FB_HELPER Kconfig option") led to de-selection of CONFIG_FB, which was a prerequisite for BACKLIGHT_CLASS_DEVICE, which CONFIG_DRM_PANEL_SIMPLE depended on. Explicitly set CONFIG_FB, to bring DRM_PANEL_SIMPLE, DRM_PANEL_EDP, FB_IMX and FB_ATMEL back into the generated .config. This also adds some new FB related features like fonts and the framebuffer console. See also commit 8c1768967e27 ("ARM: config: mutli v7: Reenable FB dependency"), which solved the same problem for multi_v7_defconfig. This relies on [1], to fix a broken Kconfig dependency. [1] https://lore.kernel.org/dri-devel/20220315084559.23510-1-tzimmermann@suse.de/raw Fixes: 91185d55b32e ("drm: Remove DRM_KMS_FB_HELPER Kconfig option") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-4-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-19ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERSAndre Przywara
Commit 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers") introduced CONFIG_MEDIA_PLATFORM_SUPPORT, to allow more fine grained control over the inclusion of certain Kconfig files. multi_v5_defconfig was selecting some drivers described in drivers/media/platform/Kconfig, which now wasn't included anymore. Explicitly set the new symbol in multi_v5_defconfig to bring those drivers back. This enables some new V4L2 and VIDEOBUF2 features, but as modules only. Fixes: 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-3-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-19ARM: configs: multi_v5_defconfig: remove deleted platformsAndre Przywara
Some ARMv5 platforms got removed from the kernel over time, so we don't need their symbols in the multi_v5_defconfig anymore: - ARCH_U300 got removed with commit ce1380c9f4bc ("ARM: remove u300 platform"), so CONFIG_ARCH_U300 is not around anymore. - ARCH_U300 was the only platform selecting ARCH_AMBA, which I2C_NOMADIK depends on. So we won't need this symbol anymore, and can't select it anyway. - i.MX27 got converted to DT in 879c0e5e0ac7 ("ARM: imx: Remove i.MX27 board files"). Remove the now obsolete board file version symbols. No change in the generated .config or savedefconfig. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-2-andre.przywara@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-08arm: multi_v5: enable configs for versatileAnders Roxell
Make it possible to boot a versatile machine in qemu. Boot command: /usr/bin/qemu-system-arm -cpu arm926 -machine versatilepb \ -nographic -nic none -m 256M -monitor none -no-reboot \ -kernel zImage -dtb versatile-pb.dtb \ -append "console=ttyAMA0,115200 rootwait root=/dev/vda" \ -drive armv5_rootfs.ext4,if=none,format=raw,id=hd0 \ -device virtio-blk-pci,drive=hd0 When doing build and boot testing, it makes more sense to enable arch vesatile, serial amba_pl011 and virtio (mmio|blk|pci) to multi_v5_defconfig to make that boot out of the box, with a modern virtio (mmio|blk|pci) driver. Using the above commandline. Another way to build and boot would be to use tuxmake/tuxrun. Tuxmake [1] builds the kernel, and Tuxrun [2] boots the kernel in qemu. Both projects uses podman to do the build/tests inside. This makes both project a good tool to use when finding a regression that you would like someone else to reproduce with the exact same setup. tuxmake --runtime podman --target-arch arm \ --toolchain gcc-11 --kconfig multi_v5_defconfig tuxrun --tuxmake ~/.cache/tuxmake/builds/3072 --device qemu-armv5 [1] https://tuxmake.org/ [2] https://tuxrun.org/ Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20220308121933.3967868-1-anders.roxell@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-09-20ARM: configs: Everyone who had PANEL_SIMPLE now gets PANEL_EDPDouglas Anderson
In the patch ("drm/panel-simple-edp: Split eDP panels out of panel-simple") we will split the PANEL_SIMPLE driver in two. By default let's give everyone who had the old driver enabled the new driver too. If folks want to opt-out of one or the other they always can later. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.5.I02250cd7d4799661b068bcc65849a456ed411734@changeid
2021-04-09ARM: config: Add WPCM to multi v5Joel Stanley
This is a newly added ARM926 platform that is not covered by any other defconfigs. Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210409054511.1534181-1-joel@jms.id.au
2021-02-21Merge tag 'oprofile-removal-5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux Pull oprofile and dcookies removal from Viresh Kumar: "Remove oprofile and dcookies support The 'oprofile' user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. The dcookies stuff is only used by the oprofile code. Now that oprofile's support is getting removed from the kernel, there is no need for dcookies as well. Remove kernel's old oprofile and dcookies support" * tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux: fs: Remove dcookies support drivers: Remove CONFIG_OPROFILE support arch: xtensa: Remove CONFIG_OPROFILE support arch: x86: Remove CONFIG_OPROFILE support arch: sparc: Remove CONFIG_OPROFILE support arch: sh: Remove CONFIG_OPROFILE support arch: s390: Remove CONFIG_OPROFILE support arch: powerpc: Remove oprofile arch: powerpc: Stop building and using oprofile arch: parisc: Remove CONFIG_OPROFILE support arch: mips: Remove CONFIG_OPROFILE support arch: microblaze: Remove CONFIG_OPROFILE support arch: ia64: Remove rest of perfmon support arch: ia64: Remove CONFIG_OPROFILE support arch: hexagon: Don't select HAVE_OPROFILE arch: arc: Remove CONFIG_OPROFILE support arch: arm: Remove CONFIG_OPROFILE support arch: alpha: Remove CONFIG_OPROFILE support
2021-01-22arch: arm: Remove CONFIG_OPROFILE supportViresh Kumar
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove the old oprofile's architecture specific support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-02ARM: configs: multi_{v5,v7}: remove ATMEL_TCLIBAlexandre Belloni
The driver is gone, stop selecting it Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201228204620.2678264-2-alexandre.belloni@bootlin.com
2020-10-27ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXCFabio Estevam
Since commit 12d16b397ce0 ("gpio: mxc: Support module build") the CONFIG_GPIO_MXC option needs to be explicitly selected. Select it to avoid boot issues on imx25/imx27 due to the lack of the GPIO driver. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-05ARM: imx: Remove i.MX27 board filesFabio Estevam
i.MX27 has basic device tree support. To achieve the goal of converting all i.MX SoCs to a devicetree-only platform, remove imx27 board files. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-05ARM: defconfig: re-run savedefconfig on multi_v* configsOlof Johansson
This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-13ARM: config: multi_v5: ASPEED SDHCI, SGPIOJoel Stanley
Enable drivers used by the ASPEED AST2400 SoC so the multi v5 defconfig can run on those boards. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-09-09ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform buildBartosz Golaszewski
Add all DaVinci boards to multi_v5_defconfig. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-06-26ARM: configs: multi_v5: Remove duplicate ASPEED optionsJoel Stanley
A recent change mistakenly added a second copy of these two options, which kbuild warns about: arch/arm/configs/multi_v5_defconfig:257:warning: override: reassigning to symbol ASPEED_LPC_CTRL arch/arm/configs/multi_v5_defconfig:258:warning: override: reassigning to symbol ASPEED_LPC_SNOOP Fixes: 2d8bf3404bb0 ("ARM: configs: multi_v5: Add more ASPEED devices") Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'aspeed-5.3-defconfig' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig ASPEED device tree updates for 5.3 Add new drivers to the ASPEED G4 and G5 defconfigs, and to the armv5 multi defconfig. * tag 'aspeed-5.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: configs: multi_v5: Add more ASPEED devices ARM: configs: aspeed: Add new drivers Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-22ARM: configs: multi_v5: Add more ASPEED devicesJoel Stanley
Enables RTC, LPC P2A, DRM, USB device and video capture as modules. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-06-19ARM: configs: Remove useless UEVENT_HELPER_PATHKrzysztof Kozlowski
Remove the CONFIG_UEVENT_HELPER_PATH because: 1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was made default to 'n', 2. It is not recommended (help message: "This should not be used today [...] creates a high system load") and was kept only for ancient userland, 3. Certain userland specifically requests it to be disabled (systemd README: "Legacy hotplug slows down the system and confuses udev"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-18mtd: rawnand: Clarify Kconfig entry MTD_NANDMiquel Raynal
MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-25ARM: config: multi_v5: Enable ASPEED driversJoel Stanley
This enables the devices used in the AST2400 family of BMC SoCs: - VUART - SPI NOR - LPC controller - LPC snoop (port 80) - Ethernet - GPIO - ADC - I2C - Random number generator - IPMI KCS - IPMI BT - Fan/Tach Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-07-25ARM: config: multi_v5: Refresh configurationJoel Stanley
This is the result of a make mutli_v5_defconfig && make savedefconfig. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-11-03ARM: configs: Stop selecting the old CESA driverBoris BREZILLON
A new driver has been developed to support the CESA IP. Switch remaining users of the old driver to the new driver in order to remove the old one. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03cpufreq: Remove CONFIG_CPU_FREQ_STAT_DETAILS config optionViresh Kumar
This doesn't have any benefit apart from saving a small amount of memory when it is disabled. The ifdef hackery in the code makes it dirty unnecessarily. Clean it up by removing the Kconfig option completely. Few defconfigs are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30ARM: defconfig: drop GPIO_SYSFS on multiplatformsLinus Walleij
The sysfs ABI to GPIO is marked obsolete and should not be encouraged. Users should be encouraged to switch to using the character device. Let's begin by removing it from the multi defconfigs. Then as time goes by I can aggressively remove it from other defconfigs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-06-11ARM: multi_v5_defconfig: enable Atmel platformsAlexandre Belloni
Enable Atmel ARMv5 platforms in multi_v5 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-05-18Merge tag 'armsoc-defconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Arnd Bergmann: "As usual, a bunch of commits, mostly adding drivers and other options to defconfigs. We are adding three new defconfig files for the newly added 32-bit machines (aspeed and mps2), the rest is mainly housekeeping. The changes outside of arch/arm/config/ are for a Kconfig symbol that got renamed" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits) ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME ARM: u8500_defconfig: update sensor config ARM: u8500_defconfig: remove staging from defconfig ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT ARM: at91/defconfig: sama5: add CONFIG_FHANDLE arm/configs: Add Aspeed defconfig arm/configs/multi_v5: Add Aspeed ast2400 ARM: at91: sama5: Update defconfig ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO ARM: multi_v7: Enable Tegra XUSB controller in defconfig ARM: tegra: Enable XUSB controller in defconfig ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver ARM: multi_v7_defconfig: add Atmel watchdog timers ARM: multi_v7_defconfig: add HLCDC drivers as modules ARM: at91/defconfig: add PDMIC driver to sama5_defconfig ARM: at91/defconfig: add HLCDC driver to sama5_defconfig ...
2016-05-10Merge tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux into ↵Arnd Bergmann
next/defconfig Merge "aspeed defconfig for 4.7" from Joel Stanley: This adds configurations used for testing Aspeed BMC SoCs, as well as adding the v5 part to the multi defconfig. * tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux: arm/configs: Add Aspeed defconfig arm/configs/multi_v5: Add Aspeed ast2400
2016-05-09net: dsa: mv88e6xxx: factorize the switch driverVivien Didelot
Now that all drivers support the same set of functions and the same setup code, drop every model-specific DSA switch driver and replace them with a common mv88e6xxx driver. This merges the info tables into one, removes the function exports, the model-specific files, and update the defconfigs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09arm/configs/multi_v5: Add Aspeed ast2400Joel Stanley
This adds the Aspeed ast2400 BMC SoC to the build. The SoC has six UARTs so we need to enable the appropriate options for SERIAL_8250 Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-04-12ARM: multi_v5_defconfig: Enable recommended options for systemdJan Luebbe
Enable FHANDLE, CGROUPS, BLK_DEV_BSG and DEVTMPFS as recommended by systemd (which also matches the multi_v7 defconfig). Also enable IPV6, which defaults to 'y' by now. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-06ARM: multi_v5_defconfig: Enable support for MX21/MX27Jan Luebbe
Although the SoC support was already enabled, the drivers and machines were missing. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-03-20Merge tag 'armsoc-defconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Arnd Bergmann: "As usual, a bunch of commits, mostly adding drivers and other options to defconfigs. The realview_smp_defconfig and realview_defconfig got merged into one, so we are now down to 110 files. For stm32, we have now added a Kconfig fragment, the first such file on arch/arm. The purpose here is to have a shared defconfig file that works for all boards, while the DRAM offset has to be hardwired on NOMMU machines at compile time. The Exynos defconfig changes depend on changes in the RTC tree, so this is pulled in here, but has already been merged into 4.6 now" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: imx_v4_v5_defconfig: Enable initramfs support ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig ARM: multi_v7_defconfig: Enable LP872x regulator support ARM: omap2plus_defconfig: Enable LP872x regulator support ARM: mxs_defconfig: Enable initramfs support ARM: mxs_defconfig: Cleanup mxs_defconfig ARM: multi_v5_defconfig: Enable initramfs support ARM: multi_v5_defconfig: Cleanup multi_v5_defconfig ARM: multi_v7_defconfig: enable useful configurations for Vybrid ARM: multi_v7_defconfig: add MACH_ARTPEC6 ARM: omap2plus_defconfig: Enable AT24 eeprom ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support ARM: omap2plus_defconfig: Enable ISP support and dependencies ARM: omap2plus_defconfig: Enable OMAP IOMMU support ARM: socfpga_defconfig: enable support for initramfs/initrd support ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig ARM: multi_v7_defconfig: Enable BCM283x ARM: bcm2835_defconfig: Enable RPi power domain driver ARM: bcm2835_defconfig: Enable RPi firmware driver ARM: bcm2835_defconfig: enable ARMv7 support ...
2016-03-14dsa: Rename mv88e6123_61_65 to mv88e6123 to be consistentAndrew Lunn
All the drivers support multiple chips, but mv88e6123_61_65 is the only one that reflects this in its naming. Change it to be consistent with the other drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26ARM: multi_v5_defconfig: Enable initramfs supportJan Luebbe
This makes it possible to automatically boot-test this defconfig with kernelci.org. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-26ARM: multi_v5_defconfig: Cleanup multi_v5_defconfigJan Luebbe
Regenerate multi_v5_defconfig by running: make multi_v5_defconfig make savedefconfig mv defconfig arch/arm/configs/multi_v5_defconfig Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-08ARM: config: Add orion5x to multi_v5_defconfigAndrew Lunn
Now that Orion5x is part of the v5 multiarch kernel enable it in the multi_v5_defconfig. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-08ARM: config: Reenable DSA in multi_v5_defconfigAndrew Lunn
DSA now depends on switchdev. Enable it, and re-enable DSA and its drivers, which were removed when multi_v5_defconfig was regenerated. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-08ARM: config: Regenerate multi_v5_defconfigAndrew Lunn
Dues the Kconfig changes, multi_v5_defconfig needs regenerating. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-11ARM: mx25: Convert to a dt-only platformFabio Estevam
As there is no more mx25 board files, we can turn mx25 into a dt-only platform. Rename imx25-dt.c to mach-imx25.c to be consistent with the other i.MX SoCs. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-01ARM: config: Add DLINK DIR665 options to multi_v5_defconfigAndrew Lunn
Enable building of the switch chip driver and the wireless driver needed by the DLINK DIR665 Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: arm@kernel.org Link: https://lkml.kernel.org/r/1414793613-11798-5-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 10:34:56 +0000