| Age | Commit message (Collapse) | Author |
|---|
|
Pull KVM fixes from Paolo Bonzini:
"On the x86 side, there are some optimizations and documentation
updates. The big ARM/KVM change for 3.11, support for AArch64, will
come through Catalin Marinas's tree. s390 and PPC have misc cleanups
and bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (87 commits)
KVM: PPC: Ignore PIR writes
KVM: PPC: Book3S PR: Invalidate SLB entries properly
KVM: PPC: Book3S PR: Allow guest to use 1TB segments
KVM: PPC: Book3S PR: Don't keep scanning HPTEG after we find a match
KVM: PPC: Book3S PR: Fix invalidation of SLB entry 0 on guest entry
KVM: PPC: Book3S PR: Fix proto-VSID calculations
KVM: PPC: Guard doorbell exception with CONFIG_PPC_DOORBELL
KVM: Fix RTC interrupt coalescing tracking
kvm: Add a tracepoint write_tsc_offset
KVM: MMU: Inform users of mmio generation wraparound
KVM: MMU: document fast invalidate all mmio sptes
KVM: MMU: document fast invalidate all pages
KVM: MMU: document fast page fault
KVM: MMU: document mmio page fault
KVM: MMU: document write_flooding_count
KVM: MMU: document clear_spte_count
KVM: MMU: drop kvm_mmu_zap_mmio_sptes
KVM: MMU: init kvm generation close to mmio wrap-around value
KVM: MMU: add tracepoint for check_mmio_spte
KVM: MMU: fast invalidate all mmio sptes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull ARM64 updates from Catalin Marinas:
"Main features:
- KVM and Xen ports to AArch64
- Hugetlbfs and transparent huge pages support for arm64
- Applied Micro X-Gene Kconfig entry and dts file
- Cache flushing improvements
For arm64 huge pages support, there are x86 changes moving part of
arch/x86/mm/hugetlbpage.c into mm/hugetlb.c to be re-used by arm64"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (66 commits)
arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board
arm64: Add defines for APM ARMv8 implementation
arm64: Enable APM X-Gene SOC family in the defconfig
arm64: Add Kconfig option for APM X-Gene SOC family
arm64/Makefile: provide vdso_install target
ARM64: mm: THP support.
ARM64: mm: Raise MAX_ORDER for 64KB pages and THP.
ARM64: mm: HugeTLB support.
ARM64: mm: Move PTE_PROT_NONE bit.
ARM64: mm: Make PAGE_NONE pages read only and no-execute.
ARM64: mm: Restore memblock limit when map_mem finished.
mm: thp: Correct the HPAGE_PMD_ORDER check.
x86: mm: Remove general hugetlb code from x86.
mm: hugetlb: Copy general hugetlb code from x86 to mm.
x86: mm: Remove x86 version of huge_pmd_share.
mm: hugetlb: Copy huge_pmd_share from x86 to mm.
arm64: KVM: document kernel object mappings in HYP
arm64: KVM: MAINTAINERS update
arm64: KVM: userspace API documentation
arm64: KVM: enable initialization of a 32bit vcpu
...
|
|
Conflicts:
arch/arm/Makefile
arch/arm/include/asm/glue-proc.h
|
|
The virtio configuration has recently moved and is now visible everywhere.
Including the file again from KVM as we used to need earlier now causes
dependency problems:
warning: (CAIF_VIRTIO && VIRTIO_PCI && VIRTIO_MMIO && REMOTEPROC && RPMSG)
selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION)
Cc: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
Commit d21a1c83c7595e387545632e44cd7797b76e19cc (ARM: KVM: define KVM_ARM_MAX_VCPUS
unconditionally) changed the Kconfig logic for KVM_ARM_MAX_VCPUS to work around a
build error arising from the use of KVM_ARM_MAX_VCPUS when CONFIG_KVM=n. The
resulting Kconfig logic is a bit awkward and leaves a KVM_ARM_MAX_VCPUS always
defined in the kernel config file.
This change reverts the Kconfig logic back and adds a simple preprocessor
conditional in kvm_host.h to handle when CONFIG_KVM_ARM_MAX_VCPUS is undefined.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
Make sure we clear the exclusive monitor on all exception returns,
which otherwise could lead to lock corruptions.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
When performing a Stage-2 TLB invalidation, it is necessary to
make sure the write to the page tables is observable by all CPUs.
For this purpose, add a dsb instruction to __kvm_tlb_flush_vmid_ipa
before doing the TLB invalidation itself.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
Not saving PAR is an unfortunate oversight. If the guest performs
an AT* operation and gets scheduled out before reading the result
of the translation from PAR, it could become corrupted by another
guest or the host.
Saving this register is made slightly more complicated as KVM also
uses it on the permission fault handling path, leading to an ugly
"stash and restore" sequence. Fortunately, this is already a slow
path so we don't really care. Also, Linux doesn't do any AT*
operation, so Linux guests are not impacted by this bug.
[ Slightly tweaked to use an even register as first operand to ldrd
and strd operations in interrupts_head.S - Christoffer ]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
S2_PGD_SIZE defines the number of pages used by a stage-2 PGD
and is unused, except for a VM_BUG_ON check that missuses the
define.
As the check is very unlikely to ever triggered except in
circumstances where KVM is the least of our worries, just kill
both the define and the VM_BUG_ON check.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
Admitedly, reading a MMIO register to load PC is very weird.
Writing PC to a MMIO register is probably even worse. But
the architecture doesn't forbid any of these, and injecting
a Prefetch Abort is the wrong thing to do anyway.
Remove this check altogether, and let the adventurous guest
wander into LaLaLand if they feel compelled to do so.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
HYP PGDs are passed around as phys_addr_t, except just before calling
into the hypervisor init code, where they are cast to a rather weird
unsigned long long.
Just keep them around as phys_addr_t, which is what makes the most
sense.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
Currently, kvmtool unconditionally declares that HVC should be used
to call PSCI, so the function numbers in the DT tell the guest
nothing about the function ID namespace or calling convention for
SMC.
We already assume that the guest will examine and honour the DT,
since there is no way it could possibly guess the KVM-specific PSCI
function IDs otherwise. So let's not encourage guests to violate
what's specified in the DT by using SMC to make the call.
[ Modified to apply to top of kvm/arm tree - Christoffer ]
Signed-off-by: Dave P Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
The arch_timer irq numbers (or PPI numbers) are implementation dependent,
so the host virtual timer irq number can be different from guest virtual
timer irq number.
This patch ensures that host virtual timer irq number is read from DTB and
guest virtual timer irq is determined based on vcpu target type.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
ARMv8 cores have the exact same timer as ARMv7 cores. Make sure the
KVM timer code can match it in the device tree.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
To use the virtual counters from the host, we need to ensure that
CNTVOFF doesn't change unexpectedly. When we change to a guest, we
replace the host's CNTVOFF, but we don't restore it when returning to
the host.
As the host sets CNTVOFF to zero, and never changes it, we can simply
zero CNTVOFF when returning to the host. This patch adds said zeroing to
the return to host path.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
The KVM/ARM MMU code doesn't take care of invalidating TLBs before
freeing a {pte,pmd} table. This could cause problems if the page
is reallocated and then speculated into by another CPU.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
Some ARM KVM VCPU ioctls require the vCPU to be properly initialized
with the KVM_ARM_VCPU_INIT ioctl before being used with further
requests. KVM_RUN checks whether this initialization has been
done, but other ioctls do not.
Namely KVM_GET_REG_LIST will dereference an array with index -1
without initialization and thus leads to a kernel oops.
Fix this by adding checks before executing the ioctl handlers.
[ Removed superflous comment from static function - Christoffer ]
Changes from v1:
* moved check into a static function with a meaningful name
Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
As requested by the KVM maintainers, remove the addprefix used to
refer to the main KVM code from the arch code, and replace it with
a KVM variable that does the same thing.
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Christoffer Dall <cdall@cs.columbia.edu>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
As KVM/arm64 is looming on the horizon, it makes sense to move some
of the common code to a single location in order to reduce duplication.
The code could live anywhere. Actually, most of KVM is already built
with a bunch of ugly ../../.. hacks in the various Makefiles, so we're
not exactly talking about style here. But maybe it is time to start
moving into a less ugly direction.
The include files must be in a "public" location, as they are accessed
from non-KVM files (arch/arm/kernel/asm-offsets.c).
For this purpose, introduce two new locations:
- virt/kvm/arm/ : x86 and ia64 already share the ioapic code in
virt/kvm, so this could be seen as a (very ugly) precedent.
- include/kvm/ : there is already an include/xen, and while the
intent is slightly different, this seems as good a location as
any
Eventually, we should probably have independant Makefiles at every
levels (just like everywhere else in the kernel), but this is just
the first step.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Pull kvm updates from Gleb Natapov:
"Highlights of the updates are:
general:
- new emulated device API
- legacy device assignment is now optional
- irqfd interface is more generic and can be shared between arches
x86:
- VMCS shadow support and other nested VMX improvements
- APIC virtualization and Posted Interrupt hardware support
- Optimize mmio spte zapping
ppc:
- BookE: in-kernel MPIC emulation with irqfd support
- Book3S: in-kernel XICS emulation (incomplete)
- Book3S: HV: migration fixes
- BookE: more debug support preparation
- BookE: e6500 support
ARM:
- reworking of Hyp idmaps
s390:
- ioeventfd for virtio-ccw
And many other bug fixes, cleanups and improvements"
* tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
kvm: Add compat_ioctl for device control API
KVM: x86: Account for failing enable_irq_window for NMI window request
KVM: PPC: Book3S: Add API for in-kernel XICS emulation
kvm/ppc/mpic: fix missing unlock in set_base_addr()
kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write
kvm/ppc/mpic: remove users
kvm/ppc/mpic: fix mmio region lists when multiple guests used
kvm/ppc/mpic: remove default routes from documentation
kvm: KVM_CAP_IOMMU only available with device assignment
ARM: KVM: iterate over all CPUs for CPU compatibility check
KVM: ARM: Fix spelling in error message
ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally
KVM: ARM: Fix API documentation for ONE_REG encoding
ARM: KVM: promote vfp_host pointer to generic host cpu context
ARM: KVM: add architecture specific hook for capabilities
ARM: KVM: perform HYP initilization for hotplugged CPUs
ARM: KVM: switch to a dual-step HYP init code
ARM: KVM: rework HYP page table freeing
ARM: KVM: enforce maximum size for identity mapped code
ARM: KVM: move to a KVM provided HYP idmap
...
|
|
Pull ARM updates from Russell King:
"The major items included in here are:
- MCPM, multi-cluster power management, part of the infrastructure
required for ARMs big.LITTLE support.
- A rework of the ARM KVM code to allow re-use by ARM64.
- Error handling cleanups of the IS_ERR_OR_NULL() madness and fixes
of that stuff for arch/arm
- Preparatory patches for Cortex-M3 support from Uwe Kleine-König.
There is also a set of three patches in here from Hugh/Catalin to
address freeing of inappropriate page tables on LPAE. You already
have these from akpm, but they were already part of my tree at the
time he sent them, so unfortunately they'll end up with duplicate
commits"
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits)
ARM: EXYNOS: remove unnecessary use of IS_ERR_VALUE()
ARM: IMX: remove unnecessary use of IS_ERR_VALUE()
ARM: OMAP: use consistent error checking
ARM: cleanup: OMAP hwmod error checking
ARM: 7709/1: mcpm: Add explicit AFLAGS to support v6/v7 multiplatform kernels
ARM: 7700/2: Make cpu_init() notrace
ARM: 7702/1: Set the page table freeing ceiling to TASK_SIZE
ARM: 7701/1: mm: Allow arch code to control the user page table ceiling
ARM: 7703/1: Disable preemption in broadcast_tlb*_a15_erratum()
ARM: mcpm: provide an interface to set the SMP ops at run time
ARM: mcpm: generic SMP secondary bringup and hotplug support
ARM: mcpm_head.S: vlock-based first man election
ARM: mcpm: Add baremetal voting mutexes
ARM: mcpm: introduce helpers for platform coherency exit/setup
ARM: mcpm: introduce the CPU/cluster power API
ARM: multi-cluster PM: secondary kernel entry code
ARM: cacheflush: add synchronization helpers for mixed cache state accesses
ARM: cpu hotplug: remove majority of cache flushing from platforms
ARM: smp: flush L1 cache in cpu_die()
ARM: tegra: remove tegra specific cpu_disable()
...
|
|
'smp-hotplug' into for-linus
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
code cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
mm: Convert print_symbol to %pSR
gfs2: Convert print_symbol to %pSR
m32r: Convert print_symbol to %pSR
iostats.txt: add easy-to-find description for field 6
x86 cmpxchg.h: fix wrong comment
treewide: Fix typo in printk and comments
doc: devicetree: Fix various typos
docbook: fix 8250 naming in device-drivers
pata_pdc2027x: Fix compiler warning
treewide: Fix typo in printks
mei: Fix comments in drivers/misc/mei
treewide: Fix typos in kernel messages
pm44xx: Fix comment for "CONFIG_CPU_IDLE"
doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
mmzone: correct "pags" to "pages" in comment.
kernel-parameters: remove outdated 'noresidual' parameter
Remove spurious _H suffixes from ifdef comments
sound: Remove stray pluses from Kconfig file
radio-shark: Fix printk "CONFIG_LED_CLASS"
doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
...
|
|
kvm_target_cpus() checks the compatibility of the used CPU with
KVM, which is currently limited to ARM Cortex-A15 cores.
However by calling it only once on any random CPU it assumes that
all cores are the same, which is not necessarily the case (for example
in Big.Little).
[ I cut some of the commit message and changed the formatting of the
code slightly to pass checkpatch and look more like the rest of the
kvm/arm init code - Christoffer ]
Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
s/unkown/unknown/
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
The CONFIG_KVM_ARM_MAX_VCPUS symbol is needed in order to build the
kernel/context_tracking.c code, which includes the vgic data structures
implictly through the kvm headers. Definining the symbol to zero
on builds without KVM resolves this build error:
In file included from include/linux/kvm_host.h:33:0,
from kernel/context_tracking.c:18:
arch/arm/include/asm/kvm_host.h:28:23: warning: "CONFIG_KVM_ARM_MAX_VCPUS" is not defined [-Wundef]
#define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS
^
arch/arm/include/asm/kvm_vgic.h:34:24: note: in expansion of macro 'KVM_MAX_VCPUS'
#define VGIC_MAX_CPUS KVM_MAX_VCPUS
^
arch/arm/include/asm/kvm_vgic.h:38:6: note: in expansion of macro 'VGIC_MAX_CPUS'
#if (VGIC_MAX_CPUS > 8)
^
In file included from arch/arm/include/asm/kvm_host.h:41:0,
from include/linux/kvm_host.h:33,
from kernel/context_tracking.c:18:
arch/arm/include/asm/kvm_vgic.h:59:11: error: 'CONFIG_KVM_ARM_MAX_VCPUS' undeclared here (not in a function)
} percpu[VGIC_MAX_CPUS];
^
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@cs.columbia.edu>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
We use the vfp_host pointer to store the host VFP context, should
the guest start using VFP itself.
Actually, we can use this pointer in a more generic way to store
CPU speficic data, and arm64 is using it to dump the whole host
state before switching to the guest.
Simply rename the vfp_host field to host_cpu_context, and the
corresponding type to kvm_cpu_context_t. No change in functionnality.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
Most of the capabilities are common to both arm and arm64, but
we still need to handle the exceptions.
Introduce kvm_arch_dev_ioctl_check_extension, which both architectures
implement (in the 32bit case, it just returns 0).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
Now that we have the necessary infrastructure to boot a hotplugged CPU
at any point in time, wire a CPU notifier that will perform the HYP
init for the incoming CPU.
Note that this depends on the platform code and/or firmware to boot the
incoming CPU with HYP mode enabled and return to the kernel by following
the normal boot path (HYP stub installed).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
Our HYP init code suffers from two major design issues:
- it cannot support CPU hotplug, as we tear down the idmap very early
- it cannot perform a TLB invalidation when switching from init to
runtime mappings, as pages are manipulated from PL1 exclusively
The hotplug problem mandates that we keep two sets of page tables
(boot and runtime). The TLB problem mandates that we're able to
transition from one PGD to another while in HYP, invalidating the TLBs
in the process.
To be able to do this, we need to share a page between the two page
tables. A page that will have the same VA in both configurations. All we
need is a VA that has the following properties:
- This VA can't be used to represent a kernel mapping.
- This VA will not conflict with the physical address of the kernel text
The vectors page seems to satisfy this requirement:
- The kernel never maps anything else there
- The kernel text being copied at the beginning of the physical memory,
it is unlikely to use the last 64kB (I doubt we'll ever support KVM
on a system with something like 4MB of RAM, but patches are very
welcome).
Let's call this VA the trampoline VA.
Now, we map our init page at 3 locations:
- idmap in the boot pgd
- trampoline VA in the boot pgd
- trampoline VA in the runtime pgd
The init scenario is now the following:
- We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd,
runtime stack, runtime vectors
- Enable the MMU with the boot pgd
- Jump to a target into the trampoline page (remember, this is the same
physical page!)
- Now switch to the runtime pgd (same VA, and still the same physical
page!)
- Invalidate TLBs
- Set stack and vectors
- Profit! (or eret, if you only care about the code).
Note that we keep the boot mapping permanently (it is not strictly an
idmap anymore) to allow for CPU hotplug in later patches.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
There is no point in freeing HYP page tables differently from Stage-2.
They now have the same requirements, and should be dealt with the same way.
Promote unmap_stage2_range to be The One True Way, and get rid of a number
of nasty bugs in the process (good thing we never actually called free_hyp_pmds
before...).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
After the HYP page table rework, it is pretty easy to let the KVM
code provide its own idmap, rather than expecting the kernel to
provide it. It takes actually less code to do so.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
The current code for creating HYP mapping doesn't like to wrap
around zero, which prevents from mapping anything into the last
page of the virtual address space.
It doesn't take much effort to remove this limitation, making
the code more consistent with the rest of the kernel in the process.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
The way we populate HYP mappings is a bit convoluted, to say the least.
Passing a pointer around to keep track of the current PFN is quite
odd, and we end-up having two different PTE accessors for no good
reason.
Simplify the whole thing by unifying the two PTE accessors, passing
a pgprot_t around, and moving the various validity checks to the
upper layers.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
In clocksource/arm_arch_timer.h we define useful symbolic constants.
Let's use them to make the KVM arch_timer code clearer.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
In order to be able to correctly profile what is happening on the
host, we need to be able to identify when we're running on the guest,
and log these events differently.
Perf offers a simple way to register callbacks into KVM. Mimic what
x86 does and enjoy being able to profile your KVM host.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
|
|
Fix typo in printk and comments within various drivers.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
In the very unlikely event where a guest would be foolish enough to
*read* from a write-only cache maintainance register, we end up
with preemption disabled, due to a misplaced get_cpu().
Just move the "is_write" test outside of the critical section.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 3401d54696f9 (KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR
ioctl) added support for the KVM_CAP_ARM_SET_DEVICE_ADDR capability,
but failed to add a break in the relevant case statement, returning
the number of CPUs instead.
Luckilly enough, the CONFIG_NR_CPUS=0 patch hasn't been merged yet
(https://lkml.org/lkml/diff/2012/3/31/131/1), so the bug wasn't
noticed.
Just give it a break!
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
Commit aa2fbe6d broke the ARM KVM target by introducing a new parameter
to irq handling functions.
Fix the function prototype to get things compiling again and ignore the
parameter just like we did before
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into fixes
|
|
Instead of hardcoding the maximum MMIO access to be 4 bytes,
compare it to sizeof(unsigned long), which will do the
right thing on both 32 and 64bit systems.
Same thing for sign extention.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
Instead of trying to free everything from PAGE_OFFSET to the
top of memory, use the virt_addr_valid macro to check the
upper limit.
Also do the same for the vmalloc region where the IO mappings
are allocated.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
|
|
It has little to do in emulate.c these days...
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
v8 is capable of invalidating Stage-2 by IPA, but v7 is not.
Change kvm_tlb_flush_vmid() to take an IPA parameter, which is
then ignored by the invalidation code (and nuke the whole TLB
as it always did).
This allows v8 to implement a more optimized strategy.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Since the arm64 code doesn't have a global asm/idmap.h file, move
the inclusion to asm/kvm_mmu.h.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
The virtual GIC is supposed to be 4kB aligned. On a 64kB page
system, comparing the alignment to PAGE_SIZE is wrong.
Use SZ_4K instead.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
The ARM ARM says that HPFAR reports bits [39:12] of the faulting
IPA, and we need to complement it with the bottom 12 bits of the
faulting VA.
This is always 12 bits, irrespective of the page size. Makes it
clearer in the code.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
guest.c already contains some target-specific checks. Let's move
kvm_target_cpu() over there so arm.c is mostly target agnostic.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
